robert louis mullen education - university of … matrix structural analysis program for special...

RESUMÉ

(October 2008) ROBERT LOUIS MULLEN

Department of Civil Engineering

Case School of Engineering Case Western Reserve University

Cleveland, Ohio 44106-7201

EDUCATION 1977 to 1980 NORTHWESTERN UNIVERSITY Doctor of Philosophy (Ph.D.) Applied Mechanics, 1981 Ted Belytschko, Advisor Thesis title: Numerical Methods for the Analysis of Fluid-Solid Interaction

Problems. 1972 to 1977 UNIVERSITY OF ILLINOIS AT CHICAGO CIRCLE Master of Science (M.S.) Structural Mechanics, 1977 Bachelor of Science (B.S.) Structural Engineering, 1976

PROFESSIONAL EXPERIENCE 2002–present Frank H. Neff Professor of Civil Engineering 1999-2008 Department Chair, Department of Civil Engineering 1994-present Professor of Civil Engineering Secondary appointment of Professor in Mechanical and Aerospace Engineering Case Western Reserve University Teaching responsibilities involve courses in solid mechanics and numerical

solution to engineering problems. Current research oriented towards the development of numerical methods for the solution of mechanics problems.

1985-1994 Associate Professor of Civil Engineering 1986-1988 Acting Associate Director Case Center for Adhesives, Sealants, and Coatings 1985 Award of Tenure

1982-1983 Faculty Fellow NASA-Lewis Research Center 1980-1985 Assistant Professor of Civil Engineering Case Western Reserve University 1980 Pre-doctoral Visiting Appointment at Institute for Computer Applications in

Science and Engineering NASA Langley Research Center 1976-1980 Illinois Central Gulf Railroad Systems Analysis (Part time) Developed Computer Management Information System for engineering and

construction projects. Developed Computer Graphic Train Scheduling System. 1977-1980 Research Assistant, Northwestern University Developed methods for solution of fluid structure interaction problems.

Developed Mesh Generation and Post Processing System for WHAMS Finite Element Program.

1974-1977 Research Assistant, University of Illinois at Chicago Circle Developed time integration methods for structural dynamics. Developed computer

graphic system anatomical analysis and other support activities for the Biomechanical Research Group.

1974 Co-op Illinois Central Gulf Railroad Produced situation surveys of bridges. Supported matrix structural analysis

program for special loads on bridges. Worked on development of train simulation system.

1973-1974 Undergraduate Research Assistant, Department of Economics, University of Illinois at Chicago.

Computer programming. Linear and non-linear regression analysis in support of project studying impact of wage-price freeze on securities pricing.

PROFESSIONAL REGISTRATIONS Registered Professional Engineer - State of Ohio #E-46847

PROFESSIONAL AFFILIATIONS

Construction Management Association of America (CMAA), Member and Board Member (Ohio

Section) 2005 to present American Society for Engineering Education (ASEE) American Society of Civil Engineers (ASCE) – Fellow 2000 to present Member 1987 to 2000

Associate Member 1981 to 1987, (Student Member 1974 to 1980), Member of the Board of Directors Cleveland Section (2007 to present)

American Society of Mechanical Engineers (ASME) - Member 1983 to present. Cleveland Society for Coatings Technology (CSCT) - Member 1987 to 1995 Federation of Societies for Coatings Technology (FSCT) - Member 1987 to 1995

AWARDS

Meritorious Service Award, Case Alumni Association, 2005 Fellow, American Society of Civil Engineers, 2000 Nomination, National Society of Professional Engineers Engineering Education Excellence Award 2000 Jeffcott Award for best paper on Rotating Machinery Dynamics, 11th Biennial ASME Design Engineering Division Conference on Mechanical Vibration and Noise, 1987. ASCE Award for Outstanding Service, 1986.

RECENT PROFESSIONAL ACTIVITIES

Editor - Four Special Issues of Journal of Reliable Computing 2006, 2007 Co-chair of “NSF International Workshop on Reliable Engineering Computation” Savannah, 2004, 2006, and 2008 Co-Director: Center on Reliable Engineering Computation, Georgia Tech Organizing Committee: Workshop on Finite Element Technology (Texas 2006) Technical Committee Membership Body of Knowledge Curriculum Committee (ASCE) Midwest Department Chairs Committee (ASCE) National ASCE Department Heads Committee Executive Counsel (Midwest Representative) Cleveland Section ASCE, Committee on Engineering Management. Cleveland Section ASCE, Board of Directors. Co-Director: Center on Reliable Engineering Computation, Georgia Tech Director – Strategic Highway Operations Workgroup (non-profit providing commercial driver safety education)

Trustee - Construction Management Association of America (Ohio section) Trustee - ASCE (Cleveland section) Member- Build up greater Cleveland Member AIAA Non deterministic analysis working group – 2000 to present Member ASTM E8 subcommittee on micro fracture and fatigue 1999 to 2004 Member, IMACS technical committee on Partial Differential Equations, 1992 to present. Secretary, Transportation Research Board Committee A2B06(1) Automated Computer Image Technology for Pavement Evaluation, 1992 to 1998. Technical Advisory Committee, CAPRI, 1988 to present ASME National Fluid Transient Committee Fluids Engineering Division, 1984 to 1992. ASCE Cleveland Section Computer Technology Committee, 1983 to present (Chairman 1983-1985). International Scientific Advisory Committee, 15th Boundary Element International Conference, 10-12 August 1993. Institute for Computation Methods in Propulsion, Steering Committee member 1985 - 1992. CSCT Education committee program chairman, 1987 to 1990. ASCE National Committee on Electronic Computation, 1985 to 1988. ASME National Committee on Computations Applied Mechanics Division, 1982 to 1988. Current University Service NSF ACES Provost Leadership Retreat Engineers with out borders (Co- advisor) Case DRIVE (engineering school representative) Science Olympiad Event Captain Policy Committee of Engineering School High School Bridge Design Contest Chairs Committee of Engineering School Undergraduate Academic Integrity hearing board Interview group – Rhodes Scholarships, Mitchell Scholarships, etc. Faculty Senate Grievance Committee High School Bridge Design Contest Other Activities North East Ohio Science Fair, Special Judge, 1989 to 1994. ASCE Student Chapter Advisor, 1981-1987. (Student chapter received letter of significant improvement, National Office ASCE, 1986) Engineering Faculty Secretary, 1981-1984.

RESUMÉ (March 2008)

ROBERT LOUIS MULLEN FRANK NEFF PROFESSOR AND DEPARTMENT CHAIR

PUBLICATIONS

Patents “Microfabricated Blades”, M. Mehregany, R.H. Rudderman and R. Mullen, issued 3 December 1996, US Patent No. 5,579,583. “Methods of Forming Closed Cell Metal Composites”, R. Mullen, M. Ozgur, G. Welsch, issued April 6, 1999 U.S. Patent number 5,890,268. “Closed Cell Metal Composites”, Robert L. Mullen, M. Ozgur and Gerhard E. Welsch, issued March 23, 2004, U.S. Patent number 6,709,739. Refereed Journal Papers and Book Chapters Zalewski, B. F. and Mullen, R. L., “Local Discretization Error Bounds Using Interval Boundary Element Method”, International Journal for Numerical Methods in Engineering (In Press 2008) Zalewski, B. F., Mullen, R. L., and Muhanna, R. L.,”Interval Boundary Element Method in the Presence of Uncertain Boundary Conditions, Integration, and Truncation Errors” Engineering Analysis with Boundary Elements (In press 2008) Bart Zalewski and Robert Mullen, “Discretization Error in Boundary Element Analysis Using Interval Methods”, SAE Transactions Journal of Passenger Cars – Mechanical Systems, (2007-01-1482) March, 2008. R. Rudderman, Robert L. Mullen and J. H. Phillips, “ The Biophysics of Mandibular Fractures: An evolution Towards Understanding”, Plastic and Reconstructive Surgery, 121, no. 2, p. 596-607, 2008

R. L. Muhanna, R. L. Mullen, and H. Zhang, “Combined Axial and Bending Stiffness in Interval Finite Element Methods”, Journal of Structural Engineering, ASCE, 133, p. 1700-1709, December, 2007. Rafi L. Muhanna, Robert L. Mullen and Hao Zhang, “Interval Finite Elements as a Basis for Generalized Uncertainty in Engineering Mechanics”, Journal of Reliable Computing, 13, p. 173-194, 2007. Mehdi Modares, Robert Mullen, and Rafi L. Muhanna, “Natural frequencies of a structure with bounded uncertainty”, Journal of Engineering Mechanics, ASCE, 132, p. 1363-1371, December 2006

Ai Liu, Gerhard Welsch, Robert Mullen, Dov Hazony, “Properties of Closed-Cell Nickel-Graphite Composite", Metallurgical and Materials Transactions A, 37A, p. 2849-2858, September, 2006. Mehdi Modares, Robert Mullen, Paul X. Bellini, and Rafi L. Muhanna, “Buckling Analysis of Structures with Interval Uncertainties”, SAE Transactions Journal of Passenger Cars – Mechanical Systems, p. 284-290,March, 2006. Wang, J., Zeng, X., and R. Mullen, “Three-Dimensional Simulation of Ground Vibration Generated by High-Speed Trains and Countermeasures,” Journal of Vibration and Control, 11(12), p. 1437-1453, 2005. Rafi L. Muhanna, Robert L. Mullen and Hao Zhang, “Penalty-Based Solution for the Interval Finite Element Methods” Journal of Engineering Mechanics, 131, pp 1102-1111, October 2005. Rafi L. Muhanna and Robert L. Mullen, “Interval Methods for Reliable Computing”, Engineering Design Reliability Handbook, CRC Press, p. 12-1 to 12-24, 2005. Dean, D.; Mullen, R.; Katz, J. L.; Totonchi, A.; Ahmad, Y.; Min, K.-J.; Wolfe, M.; Hans, M. G., “Non-destructive Methods for Determining the Biomechanical Properties of the Cranium”, Craniofacial Growth Series, 41, p.181-196, 2004. Leicht, Douglas C.; Mullen, R.; Rimnac, C.,”Adhesion Failure in Bonded Rubber Cylinders. Part 2: Fatigue Life Prediction of External Ring-Shaped Cracks Using Tearing Energy Approach” Rubber Chemistry and Technology. v. 76 no. 2 (May/June) p. 365-85, 2003. D. C. Leicht, O. H. Yeoh, A. N. Gent, J. Padovan, R. L. Mullen “Adhesion Failure in Bonded Rubber Cylinders. Part 1: Internal Penny-Shaped Cracks” Rubber Chemistry and Technology, v. 76, No. 2, (March/April) p. 160-173, 2003. Rafi L. Muhanna and Robert L. Mullen, “Treatment of Geometric Tolerances in Finite Element Analysis”, International Journal of Advanced Manufacturing Systems, 4, p. 143-162, 2001. Muhanna, Rafi L.; Mullen, Robert L., “Uncertainty in mechanics problems--interval-based approach”, Journal of Engineering Mechanics, v. 127 no6, p. 557-66, 2001. H. Kahn, N. Tayebi, R. Ballarini, R.L. Mullen and A.H. Heuer, “Fracture Toughness of Polysilicon MEMS Devices,” Sensors and Actuators, (Transducers ’99 Special Volume), Vol. 82, p. 272-280, 2000. H. Kahn, R. Ballarini, R.L. Mullen and A.H. Heuer, “Electrostatically Actuated Failure of Microfabricated Polysilicon Fracture Mechanics Specimens,” Proceedings of the Royal Society of London, A455, pp. 3807-3823, 2000.

R. Ballarini, R., Mullen. R.L., and Heuer A. H., “The effects of heterogeneity and anisotropy on the size effect in cracked polycrystalline films”, International Journal of Fracture, Vol. 95, ,No, 1-4, p. 19-39, 1999. Muhanna, R. L. and Mullen, R. L., "Formulation of Fuzzy Finite Element Methods for Mechanics Problems, "Computer Aided Civil and Infrastructure Engineering, 14, p. 107-117, 1999. Mullen, R. L. and Muhanna, R. L. "Bounds of Structural Response for All Possible Loadings," Journal of Structural Engineering, Vol. 125, No. 1, p. 98-106, 1999. R. Kayacan, R. Ballarini and R.L. Mullen, “The Effects of Tooth and Implant Mobility on Occlusal Force Transmission in Tooth/Implant Supported Prostheses,” The Journal of Prosthetic Dentistry, Vol. 78, No. 4, pp. 391-399, October 1997. R.L. Mullen, R. Ballarini and Y.Yin, “Monte-Carlo Simulation of Effective Elastic Constants of Polycrystalline Thin Films,” Acta Metallurgica et Materialia, Vol. 45, No. 6, pp. 2247-2255, 1997. R. Ballarini, R.L. Mullen, Y. Yin, A. Kahn, S. Stemmer and A.H. Heuer, “The Fracture Toughness of Polycrystalline Silicon Microdevices: A First Report,” Journal of Materials Research, Vol. 12, No. 4, pp. 915-922, 1997. R. Kayacan, R. Ballarini, R.L. Mullen and R.R. Wang, “Effects of Attachment Clips on Occlusal Force Transmission in Removable Implant-Supported Overdentures and Cantilevered Superstructures,” International Journal of Oral and Maxillofacial Implants, Vol. 12, No. 2, p. 228-236, 1997. M. Ozgur, R.L. Mullen and G. Welsch, “Analysis of Closed Cell Metal Composites”, Acta Metallurgica Inc., Vol. 44, No. 5, p. 2115-2126, 1996. M. Ozgur, R.L. Mullen and G. Welsch, “Finite Element Modeling of Internally Pressurized Closed Cell Composites”, International Journal for Numerical Methods in Engineering, Vol. 39, p. 3715-3730, 1996. Hannes Kessler, Roberto Ballarini, Robert L. Mullen, Liisa T. Kuhn, Arthur H. Heuer, “A Biomimetic Example of Brittle Toughening: (I) Steady State Multiple Cracking, Computational Materials Science, Vol. 5, pp. 157-166, 1996. Correction: Vol. 6, pp 353-355, 1996. R.C. Hendricks, B.M. Steinetz, M.M. Athavale, A.J. Przekwas, M.J. Braun, M.I. Dozozo, F.K. Choy, V.V. Kudriavtsev, R.L. Mullen, and G.L. Von Pragenau, “Interactive Development of Seals, Bearings, and Secondary Flow Systems with the Power Stream,” International Journal of Rotating Machinery, Vol. 1, No. 3-4, pp. 153-185, 1995.

J. Adolfo Acosta, J. Ludwig Figueroa, and Robert L. Mullen, "Algorithm for Pavement Distress Classification by Video Image Analysis", Transportation Research Record, No. 1505, National Academy Press, Washington, DC, pp. 27-38, 1995. Qingyuan Meng, Mehran Mehregany and Robert L. Mullen, "Theoretical Modeling of Microfabricated Beams with Elastically Restrained Supports", J. of Microelectromechanical Systems, Vol. 2, number 3, pp. 128-137, September, 1993. Wen-Hwa Chu, Mehran Mehregany and Robert L. Mullen, "Analysis of Tip Deflection and Force of a Bimetallic Cantilever Microactuator", J. of Micromechanics and Microengineering, vol. 3, pp. 4-7, March 1993. M.P. Omar, Mehran Mehregany and Robert L. Mullen, "Modeling of Electric and Fluid Fields in Silicon Microactuators", International J. of Applied Electromagnetics in Materials, vol. 3, pp. 249-252, 1993 M. P. Omar, Mehran Mehregany and Robert L. Mullen, "Electric and Fluid Field Analysis of Side-Drive Micromotors", J. of Microelectromechanical Systems, Vol. 1, pp. 130-140, Sept. 1992. J. Adolfo Acosta, J. Ludwig Figueroa, and Robert L. Mullen, "Low-Cost Video Image Processing System for Evaluating Pavement Surface Distress", Transportation Research Record, No. 1348, National Academy Press, Washington, DC, pp. 63-72, 1992. R. Rudderman and R. L. Mullen, "Biomechanics of the Facial Skeleton", Clinics in Plastic Surgery, Volume 19, Number 1, pp. 11-30, January, 1992. R. Rudderman, Robert L. Mullen, Shons and Enlow, "Three Dimensional Mechanics of the Human Mandible," to be published in Journal of the American Society of Plastic and Reconstructive Surgeons, 1994. J. Adolfo Acosta, Robert L. Mullen and J. Ludwig Figueroa, "Discussion of Digital Imaging Concepts and Applications in Pavement Management," Journal of Transportation Engineering, Vol. 118 pp. 602-605, 1992. W. E. Warren, A. Chudnovsky and Robert L. Mullen, "On the Accuracy of the Calculated Stress Field Around a Craze," Polymer Engineering and Science, 29, pp. 426-431, 1989. Rupa Purasinghe and Robert L. Mullen, "Improved Iterative Solution for Finite Element Analysis on Microcomputers," Microcomputers in Civil Engineering, Volume 4, Number 2, pp. 91-98, June 1989. Antonius S. Kurniawan and Robert L. Mullen, "Induced Stresses in Core-Shell Latex," Journal of Colloid and Interface Science, 128, pp. 201-207, 1989.

Abhisak Chulya and Robert L. Mullen, "Assumed Strain Distributions for a Finite Strip Plate Bending Element Using Mindlin/Reissner Plate Theory," Computers and Structures, 33, pp. 513-522, 1989. Joseph J. Rencis and Robert L. Mullen, "A Self-Adaptive Mesh Refinement Technique for the Boundary Element Solutions of Laplace Equation," Computational Mechanics, 3, pp. 309-319, 1988. L. T. Tam, A. J. Przekwas, A. Muszynska, R. C. Hendricks, M. J. Braun and Robert L. Mullen, "Numerical and Analytical Study of Fluid Dynamic Forces in Seals and Bearings," J. of Vibration, Acoustics, Stress and Reliability in Design, American Society of Mechanical Engineers, 110, pp. 315-325, 1988. Robert L. Mullen and Joseph J. Rencis, "Iterative Methods for Solving Boundary Element Equations," Computers and Structure, 25, No. 5, pp. 713-723, 1987. Robert L. Mullen, B. Vicek, G. McDonald and R. C. Hendricks, "Some Adhesion/Cohesion Characteristics of Plasma-Sprayed ZO2-Y2O3 Under Tensile Loading," 11th Annual Conference on Composites and Advanced Ceramic Material, ACS, 1987, in Ceramic Engineering and Science Proceedings, 8, No 7, pp. 583-595, 1987. Robert L. Mullen, G. McDonald and R. C. Hendricks, "Thermomechanical Stresses in a Simulated Interlocking Joint with Material Deposition or Swelling," 11th Annual Conference on Composites and Advanced Ceramic Material, ACS, 1987, in Ceramic Engineering and Science Proceedings, 8, No 7, pp. 559-571, 1987. (Also NASA TM 86993) Bruce A. Harrington, Robert L. Mullen and Malcolm E. Kenny, "A Finite Element Method for Determining the Stiffness of Tube-Polymer Frameworks," Macromolecules, 19, No. 11, pp. 2888-2890, 1986. Joseph J. Rencis and Robert L. Mullen, "Solution of Elastic Problems by a Self-Adaptive Mesh Refinement Technique for Boundary Element Computations," International Journal for Numerical Methods in Engineering, 23, pp. 1509-1521, 1986. Robert L. Mullen, R.C. Hendricks and G. McDonald, "Finite Element Analysis of Residual Stresses in Plasma-Sprayed Ceramics," Ceramic Engineering and Science Proceedings, pp. 871-879, 1985. R.C. Hendricks, G. McDonald and Robert L. Mullen, "Film and Interstitial Deposition of Metals in Plasma-Sprayed Ceramics," Journal of Vacuum Science and Technology A 3(6), pp. 2456-2458, 1985. M. J. Braun, M. L. Adams and Robert L. Mullen, "Analysis of a Two Row Hydrostatic Journal Bearing with Variable Properties Inertia Effects and Surface Roughness," Israel J. of Technology, 22, pp. 155-164, 1985.

M. J. Braun, Robert L. Mullen and R. C. Hendricks, "An Analysis of Temperature Effects in a Finite Journal Bearing with Spatial Tilt and Viscous Dissipation," American Society of Mechanical Engineers, 1983, in ASLE Transactions, 27, pp. 405-412, 1984. Robert L. Mullen, G. McDonald, R. C. Hendricks and M. M. Hofle, "Correlation of Compressive Stress with Spalling of Ceramic Coatings," Ceramic Engineering & Science Proceedings, 4, pp. 810, 1983. (Also NASA TM 83406) R. C. Hendricks, Robert L. Mullen and G. McDonald, "Residual Stress in Plasma-Sprayed Ceramic Coatings," Ceramic Engineering & Science Proceedings, 4, p. 802, 1983. (Also in NASA TM 83418). R. C. Hendricks, G. McDonald and Robert L. Mullen, "The Effect of Annealing on the Creep of Plasma-Sprayed Ceramics," Ceramic Engineering & Science Proceedings, 4, p. 819, 1983. (Also in NASA TM 83396). Robert L. Mullen and Robert Dickerson "An Isoparametric Finite Element with Decreased Sensitivity to Midside Node Location," Computers and Structures, 17, pp. 611-616, 1983. Robert L. Mullen and T. Belytschko, "An Analysis of an Unconditionally Stable Explicit Method", Computers and Structures, 16, no. 6, pp 691-696, 1983. Robert L. Mullen and T. Belytschko, "Dispersion Analysis of Finite Element Semidiscretizations of the Two-Dimensional Wave Equation," International Journal for Numerical Methods in Engineering, 18, pp. 11-21, 1982. T. Belytschko and Robert L. Mullen, "Two-Dimensional Fluid-Structure Impact Computations With Regularization," Computer Methods in Applied Mechanics and Engineering, 27, pp. 139-154, 1981. T. Belytschko, H.-J. Yen and Robert L. Mullen, "Mixed Methods for Time Integration," Computer Methods in Applied Mechanics and Engineering, Vol. 17, pp. 259-275, 1979. T. Belytschko and Robert L. Mullen, "Stability of Explicit Implicit Mesh Partitions in Time Integration," International Journal for Numerical Methods in Engineering, 12, 1575-1586, 1978. Edited Conference Proceedings Rafi Muhanna and Robert Mullen, editors, Proceedings of the Second Workshop on Reliable Engineering Computations, 2006. Rafi Muhanna and Robert Mullen, editors, Proceedings, Workshop on Reliable Engineering Computations, 2004.

Joseph J. Rencis and Robert L. Mullen, editors, "Structural Engineering and Microcomputers," American Society of Civil Engineers, 1987. (ISBN 0 87262 585 0)

Publications in Proceedings of Conferences Mehdi Moderes, R. L. Mullen, “Uncertainty Analysis on Dynamics of Mechanical Systems”, Reliability and Robust Design in Automotive Engineering, SAE SP-2032 ISBN 0-7680-1767-X April 2006. B.F. Zalewski, R.L. Mullen, R.L. Muhanna, “Boundary Element Analysis of Systems Using Interval Methods”, Proceedings of the NSF Workshop on Reliable Engineering Computing, 439-456, 2006. Modares, R.L. Mullen and D.A. Gasparini, “Reliable Dynamics Analysis of Transportation Systems”, Proceedings of the NSF Workshop on Reliable Engineering Computing, 457-468, 2006. Rafi L. Muhanna, Ayše Erdolen and Robert Mullen, Geometric Uncertainty in Truss Systems:, An Interval Approach”, Proceedings of the NSF Workshop on Reliable Engineering Computing, 457-468, 2006. R. Muhanna, H. Zhang, R. L. Mullen, “Computational Reliability of Structural Systems Analysis and Design, Proceedings 9th International Conference on Structural Safety and Reliability, Rome, 2005. Mehdi Modares, Robert Mullen, Paul X. Bellini, and Rafi L. Muhanna, “Buckling Analysis of Structures with Interval Uncertainties”, Proceedings SAE World Congress and Exhibition, Reliability and Robust Design in Automotive Engineering (SP-1956), 2005. Rafi L. Muhanna, Robert L. Mullen and Hao Zhang, “Interval Finite Elements as a Basis for Generalized Uncertainty in Engineering Mechanics”, Proceedings of the NSF workshop on Reliable Engineering Computing, Savannah GA, September 2004, pp. 352-370 Mehdi Modares, Robert Mullen, Rafi L. Muhanna, and Hao Zhang, “Buckling Analysis of Structures with Uncertain properties and Loads using Interval Finite Element Method”, Proceedings of the NSF workshop on Reliable Engineering Computing, Savannah GA, September 2004, pp. 317-327. M. Modares and R. L. Mullen, “Free Vibration of Structures with Interval Uncertainty”, Proceedings of the 9th ASCE Joint Specialty Conference on Probabilistic Mechanics and Structural Reliability”, July 26-28 2004. Jay J. Oswald, Robert L. Mullen, Patrick H. Dunlap Jr, and Bruce M. Steinetz, “Modeling and of High Temperature Canted Coil Springs as Seal Preloading Devices” NASA Seal/Secondary Air System Workshop, NASA Glenn Research Center, Cleveland, November 10, 2004.

Jay J. Oswald, Robert L. Mullen, Patrick H. Dunlap, Jr., and Bruce M. Steinetz, “Modeling and Evaluation of Canted Coil Springs as High Temperature Seal Preloading Devices” 40th Joint Propulsion Conference AIAA, ASME, SAE, and ASEE, Fort Lauderdale, Florida, July 11-14, 2004. (also NASA TM-2004-213189 and AIAA-2004-3889). Muhanna, R. L., Mullen, R. L., and Zhang, H., "Penalty-Based Solution for the Interval Finite Element Methods, " First Scandinavian Workshop on Interval Methods And Their Applications, August 14-16, 2003,Technical University of Denmark, Copenhagen, Denmark. R. Muhanna and R. Mullen “Interval Based Methods for Uncertainty in Computer Aided Analysis”, Proceedings of the 2000 NSF Design and Manufacturing Research Conference, January 3-6, 2000, Vancouver R. Muhanna and R. Mullen “Sharp Enclosure for Material Uncertainty in Solid and Structural Mechanics-Interval Based Approach, Part I Formulation” Proceedings of the 8th ASCE Specialty Conference on Probabilistic Mechanics and Structural Reliability, June 2000 R. Mullen and R. Muhanna “Sharp Enclosure for Material Uncertainty in Solid and Structural Mechanics-Interval Based Approach, Part II System results” Proceedings of the 8th ASCE Specialty Conference on Probabilistic Mechanics and Structural Reliability, June 2000 R. Mullen, R. Ballarini, and M. Chu, Statistical Properties of Elastic Moduli of Polycrystalline Materials Using a Johnson-Mehl Model, 8th ASCE Specialty Conference on Probabilistic Mechanics and Structural Reliability, June 2000 R. Muhanna and R. Mullen“ Sharp Interval Estimates for Finite Element Solutions with Fuzzy Material Properties” Proceedings of the ASCE Engineering Mechanics Specialty Conference, May 22-24, 2000, University of Texas at Austin. M. Chu, R. Mullen and R. Ballarini“ Monte Carlo Simulation of the Elastic Properties of Johnson-Mehl Grain Structures”, Proceedings of the ASCE Engineering Mechanics Specialty Conference, May 22-24, 2000, University of Texas at Austin Kahn, H. Tayebi, N., Ballarini, R., Mullen, R.L., and Heuer, A.H.,”Fracture and Fatigue of Polysilicon MEMS”, Proceedings of the 10th Int. Conf. On Solid-State Actuators (Transducers’99) Sendia, Japan, June7-10, 1999. Tayebi, N., Kahn, H., Ballarini, R., Mullen, R.L., and Heuer, A.H., ”Electrostatically Loaded Polysilicon MEMS Fracture Device with Sharp Crack”, Proceedings of the Second International Conference on Integrated Micro/Nanotechnology for Space Applications, Pasadena, CA, Vol. 2, pp 360-365, April 1999. Angkaewm S, Cham, P.M., Lando, J.B., Thornton, B.P., Ballarini, R, and Mullen, R.L., “Novel Stress/Strain Sensors Based on the Mechanochromic Properties of Liquid Crystalline Polydiacetylenes”, Proc. ANTEC, 1999.

R.C. Hendricks, Athavale, M. Braun M.J., Lattime, S., and Mullen, R., “Virtual and Experimental Visualization of Simulated Flow in Packed Beds of Twisted Tapes”, 2nd Pacific Symposium of Flow Visualization and Image Processing, Honolulu, HI, 16-19 May, 1999. R. Muhanna, R., Ballarini, R. and R. Mullen, "Calculation of Stress Intensity Factors with Fuzzy Loading" proceedings of the 4-th International Conference on Stochastic Structural Dynamics, University of Notre Dame, Notre Dame, IN, USA, Aug. 6-8, 1998.(Published in Stochastic Structural Dynamics”, edited by B.F. Spencer and E.A. Johnson, A.A. Balkema, Rotterdam, 1999. pp.165-168. R. Ballarini and R.L. Mullen, “Monte Carlo Study of The Role of Grain Structure on Crack-Tip Energy Release Rates in Polycrystalline Thin Films”, 13th U.S. National Congress of Applied Mechanics, June 21-26, University of Florida, Gainesville, 1998. R.C. Hendricks, J. Wilson, T. Wu, R. Flowers, and R. Mullen, “Bidirectional Brush Seals-Post-test Analysis”, 7th International Symposium of Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, Feb 22-26, 1998 (Also NASA TM 107501) R. Ballarini, R. L. Mullen, H Kahn, S. Stemmer, Y. Yin, A.H. Heuer, “Fracture Mechanics on the Micron Scale”, Second Euroconference and International Symposium, Material Instabilities in Deformation and Fracture”, Aristotle University of Thessaloniki, Thessaloniki, Greece, Aug. 31-Sept. 4, 1997. Mullen, R. L. and Muhanna, R. L., "Interval Based Finite Element Methods", proceedings of the 4-th International Conference on Numerical Methods and Applications, Bulgarian Academy of Sciences, Sofia, Bulgaria, Aug. 19-23, 1998. (Also in Technical Report 98-4 Institut fur Informatik, Universitat Basel, Switzerland). Mullen, R. L. and Muhanna, R. L. “Interval based Finite Element Methods” proceedings of the 1998 NSF Design & Manufacturing Grantees Conference, Monterey Mexico, January 1998. R. Ballarini, R. L. Mullen and A.H. Heuer, “The Fracture Toughness of Polysilicon Microdevices,” Material Res. Soc. Symp. Proc. Vol. 518, pp. 137-142, 1998. R. L. Mullen, R. Ballarini, and A. Heuer, “Fracture Energy and Elastic Constants of Polycrystalline Silicon Thin Films for Microelectromechanical Systems (MEMS) “, NSF Design and Manufacturing Grantees Conference, Seattle, Washington, Monterrey, Mexico. January 7 - 10, 1997 H. Kahn, S. Stemmer, K. Nandakumar, A.H. Heuer, R.L. Mullen, R. Ballarini and M.A. Huff, “Mechanical Properties of Relatively Thick, Surface Micromachined Polysilicon Films,” Proceedings, IEEE The Ninth Annual International Workshop on Micro Electro Mechanical Systems, San Diego, California, Feb. 11-15, 1996, pp. 343-348. R.L. Mullen, R. Ballarini, A.H. Heuer and Y.Yin, “Material Failure Analysis of Microelectromechanical Systems (MEMS), Proceedings of the 1996 National Science

Foundation Design and Manufacturing Grantees Conference, University of New Mexico, January 2-5, 1996, pp. 227-228. R. Ballarini, R.L. Mullen, Y. Yin and A.H. Heuer, “An Analytical and Experimental Study of Fracture of Microelectromechanical Systems”, 11th Engineering Mechanics Conference, ASCE, Fort Lauderdale, FL may 19-22, 1996. Robert L. Mullen and Rafi L. Muhanna. “Fuzzy-Based Load Uncertainty Structural Analysis, Fuzzy-Based Load Uncertainty Computation of Structures, Fuzzy-Based Structural Analysis with Load Uncertainty”, Proceedings of the 1996 ASCE Specialty Conference on Probabilistic Mechanics and Structural Reliability, August 7-9, 1996, Worcester, Massachusetts. R.C. Hendricks, G. McDonald and Robert L. Mullen, “Film and Interstitial Formation of Metals in Plasma-Sprayed Ceramics". Presented at the 12th International Conf. on Metallurgical Coatings, Los Angeles, 15-19 April 1995, (Also NASA TM 86993). Ranjan Jha, Robert L. Mullen, and Mehran Mehregany, "Analysis of Fluid Flow in Micromotors", Proceedings, Fifth International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, May 8-11, Kaanapali, Hawaii, pp.71-87, 1994. Xiang X. Huang, Qing Y. Meng, Robert L. Mullen and Wen H. Ko. "Modeling of Capacitive Sensors with Touch Mode Operation", 1994 NSF Design and Manufacturing Systems Conference, January 5-7, 1994, Cambridge Massachusetts. Robert L. Mullen and S. K. Hsu, "Boundary Element Methods in Coupled Electromechanical Systems", Boundary Elements 15, Elseview Science Publisher, London, pp. 517-526, 1993. (Invited) Qingyuan Meng, Mehran Mehregany and Robert L. Mullen, "Analytical Modeling of Step-up Supports in Surface-Micromachined Beams", in Technical Digest, 7th Int. Conf. Solid-State Sensors and Actuators, Yokohama, Japan, June 1993, pp. 779-782, 1993. W. Chu, M. Mehregany, and R. Mullen, "A Study of a Bimetallic Cantilever Microactuator", Transducers' 93 Yokohama, Japan, June 1993. Mehran Mehregany, M.P. Omar and Robert L. Mullen, "Analysis of Motive Torque Axial Force, and Viscous Drag Torque in Side-Drive Micromotors", in Proceedings of ASME Winter Annual Meeting, Anaheim, CA, Nov. 1992, DSC-volt. 40, pp. 133-148. J.L Figueroa, Robert L. Mullen and J.A. Acosta, "Ein preisgunstiges System fur die Erfassung und Analyse von Strabbenschaden," (A low cost Pavement Distress Survey and Analysis System), Second International Symposium on Road Surface Characteristics, Berlin June 23-26, 1992. pp. 528-549.

Robert L. Mullen, M. Mehregany, M.P. Omar, "Modeling of Electric Fields in Micro Actuators," Proceedings, International Symposium on Nonlinear Phenomena in Electromagnetic Fields, Nagoya Japan, January 26-29, 1992. (Invited) R.C. Hendricks, M.P. Proctor, J.A. Schlumberger, M.J. Braun and Robert L. Mullen, "Some Preliminary Results of Brush Seal/Rotor Interference Effects on Leakage at Zero and Low RPM Using a Tapered-Plug Rotor," presented at the AIAA/SAE/ASME/ASEE 27th Joint Propulsion Conference, June 24-27, 1991, Sacramento, California, AIAA paper 91-3390 (Also NASA TM 104396) 1991. Robert L. Mullen, Mehran Mehregany, M.P. Omar and W.H. Ko, "Theoretical Modeling of Boundary Conditions in Microfabricated Beams", in Proceedings of the 4th IEEE Workshop on Micro Electro Mechanical Systems, Nara, Japan, Feb. 1991, pp. 154-159. R.C. Hendricks, J.A. Schlumberger, M.J. Braun, F. Choy and Robert L. Mullen, "A Bulk Flow Model of a Brush Seal System," presented at the International Gas Turbine and Aeroengine Congress and Exposition, Orlando, Florida, June 3-6, 1991. R. C. Hendricks, M.J. Braun, V. Vanacci, and Robert L. Mullen, "Simulation of Brush Insert for Leading-Edge-Passage Convective Heat Transfer," 4th International Symposium of Transport Phenomena in Heat and Mass Transfer, Sydney, Australia, 14-18 July 1991.(Also NASA TM 103801) Robert L. Mullen, M.J. Braun and R.C. Hendricks, "Numerical Modeling of Flows in Simulated Brush Seal Configurations," presented at the AIAA/SAE/ASME/ASEE 26th Joint Propulsion Conference, July 16-18, 1990, Orlando, Fl., AIAA paper 90-2141 (1990). (paper 91-GT-325) R. C. Hendricks, M.J. Braun and Robert L. Mullen, "Brush Seals Configurations for Cryogenic and Hot Gas Applications," 1990 Conference on Advanced Earth to Orbit Propulsion Technology, Huntsville, Al., May 15-17, 1990. Kevin Radil, Robert L. Mullen, D. Gasparini and A. Kasack, "Effect of Axial Vibration on Helicopter Overrunning Clutches," STLE Annual Meeting, Denver, Co., May 7-10, 1990 . R. C. Hendricks, M.J. Braun, V.A. Canacci and Robert L. Mullen, "Brush Seals in Vehicle Tribology," Proceedings of the 13th Leeds-Lyon Symposium on Tribology, 1990. Roberto Ballarini, Shamim Ahmed and Robert L. Mullen, "Finite Element Modeling of Frictionally Restrained Composite Interfaces," Interfaces in Metal-Ceramics Composites, edited by R.Y. Lin, R.J. Arsenault, G.P. Martins and S.G. Fishman, The Minerals, Metals and Materials Society, Warrendale, PA, pp. 349-388, 1989. Joseph J. Rencis and Robert L. Mullen, "Boundary Element Formulation for Microelastic Solids," 4th International Conference on Boundary Element Technology, Windsor, Canada, June

6-8, 1989. In Boundary Element Techniques: Applications in Engineering, Ed. C. A. Brebbia, Computational Mechanics Publications, Southampton, 1988.(ISBN 1-85312-022-7) A. K. Singhal, Robert L. Mullen and M. J. Braun, "Numerical Modeling Considerations for High Speed Shaft Seal and Journal Bearing Flows," 2nd International Symposium on Transport Phenomena, Dynamics and Design of Rotating Machinery, ASME and JSME, Honolulu, 1988 (Hemisphere publishing) R. C. Hendricks, L. T. Tam and A. Przekwa, A. Muszynska, M. J. Braun and Robert L. Mullen, "Numerical Modeling of Multidimensional Flow in Seals and Bearings Used in Rotating Machinery," 2nd International Symposium on Transport Phenomena, Dynamics and Design of Rotating Machinery, ASME and JSME, Honolulu, Hemisphere Publishing Corporation, 1988 (Also NASA TM 100779). (Invited) M. J. Braun, N. Ida, C. Batur, B. Rose, R. C. Hendricks and Robert L. Mullen, "A Non-Invasive, Laser Based Method in Flow Visualization and Evaluation in Bearings," Institute of Mechanical Engineers, International Conference on Tribology, Friction, Lubrication and Wear, July 1-3, London, 1987. M. J. Braun, C. Batur, N. Ida, B. Rose, R. C. Hendricks and Robert L. Mullen, "A Non-Invasive, Laser Based Flow Analysis for Thin Film Flows," Proceedings American Society of Mechanical Engineers-Japan Society of Mechanical Engineers Heat Transfer Conference, Hawaii, March, 1987 (Proceeding: Volume 2, pp. 71-78). R. C. Hendricks, L. T. Tam, A. J. Przekwas, Robert L. Mullen and A. K. Singhal, "A Multidimensional Numerical Algorithm of Seal/Bearing Flows for Turbomachines," Proceedings 17th Internationaler Kongress Fur Kaltetchnik, 1987. (Also NASA TM) Joseph J. Rencis and Robert L. Mullen, "A Geometric Preprocessing for Adaptive Boundary Element Problems," Proceedings of the IUTAM Symposium on Advanced Boundary Element Methods: Applications in Solid and Fluid Mechanics, San Antonio, April 13-16, 1987. L. T. Tam, A. J. Przekwas, A. Muszynska, R. C. Hendricks, M. J. Braun and Robert L. Mullen, "Numerical and Analytical Study of Fluid Dynamic Forces in Seals and Bearings," 11th Biennial Conference on Mechanical Vibrations and Noise, Boston MA, September 27-30, 1987. (Also NASA TM). S. Mital, Robert L. Mullen and A. H. Huckelbridge, "Interface Behavior in Reinforced Concrete," Proceeding of the Material Research Society, Fall 1987 Meeting, Boston, MA. Dec 2-4, 1987. Robert L. Mullen, R. C. Hendricks and M. J. Braun, "Automatic Measurement of Crack Growth During Fatigue Test," 33rd International Instrumentation Symposium, Instrument Society of America, May 3-8, Las Vegas, Nev., 1987.

M. J. Braun, C. Batur, Robert L. Mullen and R. C. Hendricks, "Computer Methodology for Quantitative Flow Visualization," 33rd International Instrumentation Symposium, Instrument Society of America, May 3-8, Las Vegas, Nev., 1987. R.C. Hendricks, M.J. Braun and Robert L. Mullen, "Two Phased Flows and Heat Transfer Within Systems with Ambient Pressure Above the Thermodynamic Critical Pressure," paper TP-13, Eighth International Heat Transfer Conference and Exhibition, August 17-22, 1986, San Francisco, CA (Also NASA TM 87228). Joseph J. Rencis and Robert L. Mullen, "Stress Concentration Analysis by a Macroelastic Boundary Element Model," American Society of Civil Engineers National Spring Convention, Seattle, Washington, April 1986. Robert L. Mullen, J. Padovan, M. J. Braun, B. Chung, G. McDonald and R. C. Hendricks, "Thermomechanical Design Criteria for Ceramic Coated Surfaces," Proceedings of the World Congress on High Tech Ceramics, Milan, Italy, 1986. (Also NASA TM-87328) R. C. Hendricks, Robert L. Mullen, M. J. Braun and Robert L. Wheeler III, "A Refrigerated Dynamic Seal to 6.9 Mpa," CEC/ICMC Cryogenic Engineering Conference, Cambridge, MA, 1985, in Advances in Cryogenic Engineering, 31, 1986. (Also NASA TM 87108) R. Purasinghe and Robert L. Mullen, "Solving Finite Element Structural Dynamic Problems on a Small Computer Using Semi-Explicit Methods," Proceedings 9th Conference on Electronic Computation, K. M. Will, ed., American Society of Civil Engineers, 1986, pp. 220-231. J. Padovan, M. J. Braun, B. Chung, Robert L. Mullen, G. McDonald and R.C. Hendricks, "Thermomechanical Design Criteria for ZrO2-X-Y2O3-Coated Surfaces," Zirconia 86, The Ceramic Society of Japan, Tokyo, 1986. Joseph J. Rencis and Robert L. Mullen, "A Geometric Preprocessor for Self-Adaptive Mesh Refinement Technique for the Boundary Element Method," BETECH/86, MIT, 1986. Robert L. Mullen and Joseph J. Rencis, "Adaptive Mesh Refinement Techniques for Boundary Element Methods," Symposium on Advanced Topics in Boundary Element Analysis, in Advanced Topics in Boundary Element Analysis, T. Cruse, A. Pifko and H. Armen, ed., AMD, 72, American Society of Mechanical Engineers, pp. 235-256, 1985. Robert L. Mullen and M. J. Braun "Modeling of Oven-Curing Including Flow and Evaporation Effects Using Finite Element Analysis," Coatings Rheology Symposium honoring R. Meyers, ACS, New York, 1985, (Polymer Science Proceedings, A85, p. 878) (Invited). Robert L. Mullen and M. J. Braun "Modeling of Thermoset Oven-Curing Including Flow and Evaporation Effects Using Finite Element Analysis," 63rd Federation of Societies for Coatings Technology, St. Louis, 1985.

M. J. Braun, Robert L. Mullen, Andre Prekwas and R. C. Hendricks, "Finite Difference Solution for a Generalized Reynolds Equation with Homogeneous Two-Phase Flow," Proceedings Workshop on Heat and Mass Transfer in Rotating Systems, American Society of Mechanical Engineers, 1985. Robert L. Mullen, Andre Prekwas, M. J. Braun and R. C. Hendricks, "Finite Element and Finite Difference Methods for a Reynolds Equation Using a Power Law Fluid," Workshop on Heat and Mass Transfer in Rotating Systems, American Society of Mechanical Engineers, 1985. Joseph J. Rencis and Robert L. Mullen, "A Self Adaptive Mesh Refinement Technique for Boundary Element Solution of the Navier's Equation," Integral Methods in Science & Engineering (Payne, Corduneanu, Haji-Sheiki and Huang, ed.) Hemisphere, Washington, 1985, p. 383-398. Robert L. Mullen and Joseph J. Rencis, "Iterative Methods for the Boundary Element Method," presented American Society of Mechanical Engineers Summer Annual Meeting, 1985. (Also in Computer Aided Engineering (S. S. Brown ed.), PVP Volume 98-5, American Society of Mechanical Engineers, 1985, pp. 217-227.) R.C. Hendricks, M.J. Braun and Robert L. Mullen, "Nested Sub critical Flows within Supercritical Systems," presented at 20th Annual Cavitation and Multiphase Flow Forum, Albuquerque, New Mexico, 1985. (Also in Cavitation and Multiphase Flow (J.W. Hoyt, ed.) FED, Vol. 23, American Society of Mechanical Engineers, 1985, p. 110-116.) (Also NATA TM 86980) M.J. Braun, Robert L. Mullen and R.C. Hendricks, "A Parametric Predictive Algorithm for Turbine-Feedwater Heaters Assembly for a Large Steam Power Plant," 7th Annual Industrial Energy Technology Conference and Exhibition, 1985. R. Purasinghe and Robert L. Mullen, "Improved Iterative Methods for Solving Structural Dynamic Problems," 22nd Annual Meeting of the Society of Engineering Sciences, Pennsylvania State University, University Park, October, 1985. Robert L. Mullen and R. C. Hendricks, "A 3-Body Approach to Friction Contact Modeling," 22nd Annual Meeting of the Society of Engineering Sciences, Pennsylvania State University, University Park, October, 1985. Robert L. Mullen and Joseph J. Rencis, "A Linear Boundary Element Approach to Plane Microelasticity," 22nd Meeting of the Society of Engineering Science, Pennsylvania State University, 1985. R.C. Hendricks, M. J. Braun, Robert L. Wheeler III and Robert L. Mullen "Two-Phase Flows With Ambient Pressure Above the Thermodynamic Critical Pressure," Bently Rotor Dynamics Research Symposium on Instability in Rotating Machinery, Carson City, NV, 1985.

R. C. Hendricks, M. J. Braun, Robert L. Mullen, R. E. Bucham and W. A. Diamond, "Analysis of Experimental Shaft Seal Data for High-Performance Turbomachines as for Space Shuttle Main Engines," Proceedings Workshop on Heat and Mass Transfer in Rotating Systems, 1985. (Also NASA TM 86928) Joseph J. Rencis and Robert L. Mullen, "Boundary Element Model of Two-Dimensional Micropolar Elastic Solid," presented Fifth International Conference on Mathematical Modeling, Berkeley, 1985. A. K. Majumdar, R.C. Hendricks, M.J. Braun and Robert L. Mullen, "Flow in a Combining Manifold Heat Exchanger," Beijing International Symposium on Hydrogen Systems Proceeding, 1985. W. Warren, A. Chudnovsky and Robert L. Mullen, "On the Accuracy of the Calculated Stress Field Around a Craze," American Physical Society Meeting, 1985. R. C. Hendricks, M.J. Braun, Robert L. Wheeler III and Robert L. Mullein "Nested Subcritical Flows Within Supercritical Systems," Beijing International Symposium on Hydrogen Systems, 1985. M.J. Braun, Robert L. Mullen, R.C. Hendricks and Robert L. Wheeler, "Development and Discussion of a Two-Phase Homogeneous Model for a Generalized Reynolds Equation Cavitation and Multi-Phase Flow," (J. W. Hoyle, ed.), Fed-23, American Society of Mechanical Engineers, 1985, pp. 120-123. M. J. Braun, M. L. Adams and Robert L. Mullen, "Analysis of a Two Row Hydrostatic Journal Bearing with Variable Properties Inertia Effects and Surface Roughness," Israel J. of Technology, 22, 1985, pp. 155-164 and presented at 18th Israel Conference on Mechanical Engineering, June 27, 1984, Haifa. J. Padovan, B.T.F. Chung, M.J. Braun, Robert L. Mullen, R.C. Hendricks and G. McDonald, "Application of a Plastic Flow Thermomechanical Algorithm to Plasma-Sprayed Ceramic Turbine Seals," presented 9th Annual Conference on Composites and Advanced Ceramic Materials, 1985. Robert L. Mullen and Joseph J. Rencis, "Adaptive Mesh Refinement for the H-version of the Boundary Element Method," Proceedings of the 10th Canadian Congress of Applied Mechanics, Vol. 2, p. D-51, London, Ontario, 1985. Robert L. Mullen, M.J. Braun and R.C. Hendricks "Finite Element Solutions for the Stiffness and Damping of a Three-Dimensional Journal Bearing Using a Non-Newtonian Fluid," Proceedings of the 10th Canadian Congress of Applied Mechanics, Vol. 2, pp. E-23, London, Ontario, 1985. R .C. Hendricks, M. Niino, A. Kumakawa, V. M. Yeroshenko, L.A. Yaksin, M.J. Braun and Robert L. Mullen, "Friction Factors and Heat Transfer Coefficients for Hydrogen Systems

Operating at Supercritical Pressures," presented at Beijing International Symposium on Hydrogen Systems, Beijing, China, 1985. M.J. Braun, Robert L. Mullen, R.C. Hendricks, Robert L. Wheeler, "Fluid Flow and Heat Transfer in Annuli with Axial Pressure Gradient a Non-Isothermal Rotating Inner Cylinder and an Insulated Outer Cylinder," 1985 American Society of Mechanical Engineers National Heat Transfer Conference, 1985. Joseph J. Rencis and Robert L. Mullen, "Self Adaptive Mesh Refinement for Boundary Element Solution of Laplace Equation," Society of Engineering Science Meeting, Virginia Polytechnic Institute and State University, 1984. Robert L. Mullen, "Quasi-Eulerian Formulation of Thermal Elastic Contact Problem Involving Moving Loads," Winter Annual Meeting American Society of Mechanical Engineers, 1984. A. Chudnovsky, Robert L. Mullen and W. Warren, "On the Accuracy of the Calculated Stress Field Around a Craze," presented American Physical Society Meeting, Detroit, 1984. Robert L. Mullen and C. Scavuzzo, "Fabrication and Analysis of High Temperature Ceramic Free-form Static Seals," 8th Annual Conference on Composites and Advance Ceramic Materials, American Ceramic Society, 1984, Ceramic Engineering & Science Proceedings. Robert L. Mullen and Rupasiri P. Purasinghe, "An Improved Iterative Method for Solving Finite Element Equations," Proceedings 12th Southeastern Conference on Theoretical and Applied Mechanics, 1984. Robert L. Mullen and C. Scavuzzo, "Effect of High Temperature Exposure on the Adhesive Strength of Plasma-Sprayed Ceramic," 8th Annual Conference on Composites and Advance Ceramic Materials, American Ceramic Society, 1984. J. Padovan, B. Chung, M. J. Braun and Robert L. Mullen, "An Improved Plastic Flow Thermomechanical Algorithm and Heat-Transfer Analysis for Plasma-Sprayed Ceramics," 8th Annual Conference on Composites and Advance Ceramic Materials, American Ceramic Society, 1984. Robert L. Mullen and Rupasiri P. Purasinghe, "An Improved Iterative Method for Solving Finite Element Equations on Micro Computers," Proceedings Third Conference in Computing in Civil Engineering, 1984. (Invited) M. J. Braun, R. C. Hendricks and Robert L. Mullen, "Studies of Two Phase Flow in Hydrostatic Journal Bearings," 7th Annual Energy Sources Conference, Cavitation and Multi-Phase Flow, FED-9 American Society of Mechanical Engineers, pp. 61-65, 1984. R. C. Hendricks, M. J. Braun and Robert L. Mullen, "Experimental Study of Bubble Cavities Attached to a Rotating Shaft in a Reservoir," 7th Annual Energy Sources Conference, Feb. 11-

19, New Orleans, Cavitation and Multi-Phase Flow, FED-9, American Society of Mechanical Engineers, pp. 77-79, 1984. (Also NASA TM 83586) J. Padovan, G. McDonald, R.C. Hendricks, Robert L. Mullen and M. J. Braun, "Plastic Flow of Plasma-Sprayed Ceramics," presented at International Symposium on Plastic Deformation of Ceramic Material, Pennsylvania State University, 1983. (Also in book with same title, pp. 473-485.) M. J. Braun, Robert L. Mullen and R. C. Hendricks, "A Three-Dimensional Numerical Method with Applications to Tribological Problems," Proceedings of the 10th Leeds-Lyon Symposium on Tribology, 1983. Robert L. Mullen and R. C. Hendricks, "Finite Element Formulation for Transient Heat Treat Problems," American Society of Mechanical Engineers-JSME Thermal Engineering Joint Conference Proceedings, Volume 3, 1983, pp. 367-374. (Also NASA TM 83070). R. C. Hendricks, Robert L. Mullen and M. J. Braun, "Analogy Between Cavitation and Fracture Mechanics," American Society of Mechanical Engineers-JSME Thermal Engineering Joint Conference Proceedings, Volume 1, 1983, pp. 35-42. (Also NASA TM 83071). R. C. Hendricks, G. McDonald, Robert L. Mullen, M. J. Braun, B. T. Chung and J. Padovan, "Thermomechanical Loading of Multi-Layered Cylindrical Geometries in Thermal Cycling From 300 to 1300 K.," American Society of Mechanical Engineers-JSME Thermal Engineering Joint Conference Proceedings, Volume 3, 1983, pp. 329-340. (Also NASA TM 83312) M. J. Braun, Robert L. Mullen and R. C. Hendricks, "A Thermomechanical Model for Energy Propagation in a Solid-Fluid-Solid System with One Boundary in Relative Motion," National Heat Transfer Conference, 83-HT-97, American Society of Mechanical Engineers, 1983. M. J. Braun, Robert L. Mullen and R. C. Hendricks, "An Analysis of Temperature Effects in a Finite Journal Bearing with Spatial Tilt and Viscous Dissipation," presented ASLE-American Society of Mechanical Engineers Lubrication Conference, American Society of Mechanical Engineers, 1983. R. C. Hendricks, G. McDonald and Robert L. Mullen, "The Effect of Annealing on the Creep of Plasma-Sprayed Ceramics", 7th Annual Conference on Composites and Advance Ceramic Materials, American Ceramic Society, 1983. Robert L. Mullen, G. McDonald, R. C. Hendricks and M. M. Hofle, "Correlation of Compressive Stress with Spalling of Ceramic Coatings", 7th Annual Conference on Composites and Advance Ceramic Materials, American Ceramic Society, 1983. R. C. Hendricks, Robert L. Mullen and G. McDonald, "Residual Stress in Plasma-Sprayed Ceramic Coatings", 7th Annual Conference on Composites and Advance Ceramic Materials, American Ceramic Society, 1983.

T. Belytschko, Robert L. Mullen and James Kennedy, "Regularization in the Numerical Treatment of Impact," 15th International Congress of Theoretical and Applied Mechanics, University of Toronto, 1980. T. Belytschko and Robert L. Mullen, "Two-Dimensional Fluid-Structure Impact Computations," American Society of Mechanical Engineers PVP-138, 1980. Robert L. Mullen, T. Belytschko and A. Schultz, "A Computer Graphics System for Anatomical Analysis," Department of Materials Engineering, University of Illinois, Chicago, 1976. Robert L. Mullen, J. M. Kennedy and T. Belytschko, "Application of Mesh Partitions of Explicit Implicit Integration to Reactor Safety Problems," American Nuclear Society Transactions, Volume 24, 1976. (Invited) T. Belytschko and Robert L. Mullen, "On Dispersive Properties of Finite Element Solutions," Modern Problems in Elastic Wave Propagation, John Wiley and Sons, 1978. T. Belytschko and Robert L. Mullen, "WHAMS a Program for Transient Analysis of Structures and Continua," Structural Mechanics Software Series, Volume 2, University Press of Virginia, 1978. (Invited) T. Belytschko and Robert L. Mullen, "Explicit Integration of Structural Problems," Finite Elements in Nonlinear Mechanics, TAPIR Norwegian Institute of Technology, 1978. T. Belytschko and Robert L. Mullen, "Mesh Partitions of Explicit Implicit Time Integration," Formulations and Computational Algorithms in Finite Element Analysis, MIT Press, 1977. T. Belytschko, N. Holmes and Robert L. Mullen, "Explicit Integration-Stability, Solution Properties, Cost," Finite Element Analysis of Transient Nonlinear Structural Behavior AMD-14, American Society of Mechanical Engineers, 1976. Conference Presentations, Lectures and Seminars R. Mullen and R. Rudderman, “Predicting the Impact of Future Technology on the Practice of Surgery”, American Association of Plastic Surgery Annual Meeting, Hilton Head, May, 2006. Robert Mullen, Mehdi Modares, and Rafi Muhanna, “Applications of Interval Methods to Engineering Analysis,” Reseach Showcase, CWRU, April 2004. Mullen, R. and Muhanna, R. “Critical Issues in the Application of Interval Methods to Finite Element Analysis”, SCAN 2002, Paris, France, September, 2002. Mullen, R. and Muhanna R. “Information Content, Finite Element Analysis, and Interval Analysis”, SIAM Workshop on Reliable Computing”, Toronto, Canada, May 26, 2002.

Dean D, Totonchi A, Wolfe M, Mullen R, Katz JL, Birceneau S, Rimnac CM, Hans MG: Non-Destructive Biomechanical Testing of Tissue Engineered Grafts. April 20-24, New Orleans, LA. Mullen, R. L. and Muhanna, R. L. "Efficient Interval Methods for Finite Element Solution, " The 16th Annual International Symposium on High Performance Computing Systems and Applications (HPCS'2002)," Moncton, NB, Canada, June 17-19, 2002. Dean D, Mullen RL, Katz JL, Totonchi A, Ahmad Y, Wolfe M, Rimnac C, Cooke M, Hans MG. A Bovine Model for Finite Element Model Construction, Non-destructive Tissue Engineered Explant Assessment, and Determining Material Properties for Tissue Engineered Scaffolds. Midwestern Tissue Engineering Consortium. Ann Arbor, MI 4/19/02. Muhanna, R. L. and Mullen, R. L, " Modeling of Engineering Systems Under Uncertainty, " Petrobras Research Center, Rio de Janeiro, Brazil, November, 12,2002 Muhanna, R. L. and Mullen, R. L, " Fundamental Concepts for Interval-based Finite Element Formulations, " Federal University of Rio de Janeiro, Rio de Janeiro, Brazil, November, 11,2002 Mullen, R. and Muhanna, R. “Critical Issues in the Application of Interval Methods to Finite Element Analysis”, SCAN 2002, Paris, France, September, 2002. Mullen, R. and Muhanna R. “Information Content, Finite Element Analysis, and Interval Analysis”, SIAM Workshop on Reliable Computing”, Toronto, Canada, May 26, 2002. Muhanna, R. L., Mullen, R. L., and Zhang, H., "Penalty-Based Solution for the Interval Finite Element Methods, " First Scandinavian Workshop on Interval Methods And Their Applications, August 14-16, 2003,Technical University of Denmark, Copenhagen, Denmark. Robert L. Mullen “Uncertainty Treatment in Mechanics”, Department of Mechanical Engineering, CWRU, February 2002 Robert L. Mullen, “The pace of innovation, technology diffusion and the evolution of fracture treatment”, AO Foundation Trustees Meeting, Bad Ragaz Switzerland, June 30, 2001. Robert Mullen, “Interval Finite Element Methods”, Invited presentation at WPI Feb 13, 2001 Robert L. Mullen, “Enabling the potential of Non-Deterministic Approaches”, AIAA-NDA-WTG meeting, Atlanta, Georgia, April 2, 2000. Mullen, R.L., “Fuzzy methods for heat transfer in bearings”, Dudley Fuller Symposium, Ohio Aerospace Institute, 1999. R. L. Mullen, “Residual stress in polysilicon films”, Workshop on Micro and Nano Scale Structures” ASTM May Meeting, Atlanta Georgia, May 1-9, 1998.

R. L. Mullen and R. Ballarini, “Monte-Carlo Simulation of Fracture in Polycrystalline Materials”, 12th Engineering Mechanics Conference, ASCE, La Jolla, California, May 17-20, 1998. R. L. Mullen, “Fracture Mechanics on the Micron Scale”, Second Euroconference and International Symposium, AUT, Thessaloniki, Greece, August 31- September 4, 1997. R.L. Mullen and R.L. Muhanna, “Structural Analysis with Fuzzy-Based Load Uncertainty”, 7th ASCE Specialty Conference on Probabilistic Mechanics and Structural Reliability, August 7-9, 1996, Worcester Massachusetts, USA Session W3-C. R. Ballarini, R.L. Mullen, Y. Yin and A.H. Heuer, “An Analytical and Experimental Study of Fracture of Microelectromechanical Systems”, 11th ASCE Engineering Mechanics Conference, May 19-22, 1996, Fort Lauderdale, FL USA Session 7H. R. Mullen and T. Bansal, "Failure of Multilayer Coatings upon Deformation," EPIC technology Review, April 30, 1992. R. Rudderman, and Robert L. Mullen, "Biomechanics of the Human Mandible," Facial Fracture Seminar, AMA, Chicago, 1991. R. Rudderman, and Robert L. Mullen, "Biomechanics of the Human Mandible," AO course on Maxiofacial Surgery, DAVOS, Switzerland, 1991. S. Mital, Robert L. Mullen and A. H. Huckelbridge, "Geometry Effects on Apparent Bond Strength in Composite Materials," The Second International Conference on Composite Interfaces, CWRU, 1988. Robert L. Mullen, "Mathematical Models in Coatings & Films," Gordon Conference on Coatings & Films, Plymouth, 1986. R. Purasinghe and Robert L. Mullen, "Semi-Explicit Methods for Solving Finite Element Structural Dynamic Problems," Proceeding of American Society of Civil Engineers Spring Convention, 1986. Robert L. Mullen, M. J. Braun and R. C. Hendricks, "Finite Element Formulation of a Reynolds Type Equation for a Power Law Fluid," presented, Fifth International Symposium on Finite Element Methods in Flow Problems, Austin, Texas, 1984. Robert L. Mullen "Mechanical Behavior of Plasma-Sprayed Ceramic Coatings," ACS Student Chapter Meeting, Case Western Reserve University, November 30, 1984. R. C. Hendricks, G. McDonald and Robert L. Mullen, "A Technique to Fabricate Complex Free Form Ceramic Components," Gas Path Rub Energetics Workshop, NASA Lewis, 1983.

M. J. Braun, Robert L. Mullen and R. C. Hendricks, "A Parametric Study of Pressure and Temperature in a Narrow Gap Between a Stationary Outer Cylinder and an Inner Rotating Mis-aligned Shaft," National Heat Transfer Conference, American Society of Mechanical Engineers, Niagara Falls, 1984. Robert L. Mullen, R. C. Hendricks and G. McDonald, "Ceramic Formed by Plasma Spraying," International Conference on Metallurgical Coatings, San Diego, 1983. Robert L. Mullen and T. Belytschko, "On Properties of Multidimensional Finite Element Solutions," SIAM Fall Meeting, 1979. Reports J.A. Acosta, J.L. Figueroa, and R.L. Mullen, "Feasibility study to implement the video image processing technique for evaluating pavement surface distress in the State of Ohio", Final Report No. FHWA/OH-91/010. R. L. Mullen, R, Zab, and A. Kurniawan, "Thermal Mechanical Analysis of Sprag Clutches, Final Report, NASA CR190686.pp. 263 ,1992.

RESUMÉ (September 2008)

ROBERT LOUIS MULLEN

Graduate Students and Post Doctoral Fellows Advised Post Doctoral Researchers Dr. Hal Khan 1997-2001 Dr. Kyoung-June Min 2003-2004 Ali Totonchia, M.D. 2001-2002 Michael Wolfe, M.D. 2001-2002 Dr. Louis Ghosn 1998-2002 Ph.D. Students Bartlomiej F. Zalewski, Ph.D. 2008 “Uncertainties In The Solutions To Boundary Element Method An Interval Approach” Mehdi Modares, Ph.D. 2005 “Dynamic Analysis of Structures with Interval Uncertainty” (Assistant Professor, Tufts University) Douglas C. Leicth, Ph.D. 2001 “Fracture Mechanics of Adhesion Test Specimens Using Finite Element Analysis” (Currently at Lord Corporation) Mehmet Ozgur, Ph.D. 1997 “An Analysis of Closed Cell Metal Composites” (Progressive Insurance) Ramazan Kayacan, Ph.D. 1997 (with Prof. Ballarini) “Structural Mechanics of Implant-Supported Dental Prostheses” (Assistant Professor of Mechanical Engineering. at Suleyman Demirel University in Isparta, Turkey) Michael Kent Hagigat, Ph.D. 1994 “ Influence of Non Classical Friction on the Rubbing and Impact Behavior of Rotor Dynamic Systems “ Jesus-Adolfo Acosta, Ph.D. 1994 “Pavement Surface Distress Evaluation Using Video Image Analysis” (Sr. Engr., MACTEC Engineering and Consulting, Inc) Michael J. Poldneff, Ph.D. 1993. “Design Sensitivity Analysis of Dynamic Coupled Thermoviscoelastic Systems” (Department of Computational Mechanics Goodyear Tire and Rubber Co.)

Hon Ho Liu, Ph.D. 1993 “A Finite Element Formulation and Analysis for Advection-Diffusion and Incompressible Navier-Stokes Equations” (Currently at Goodyear Technical Center) Antonius S. Kurniawan, Ph.D. 1990 “Generalized Eulerian-Lagrangian Finite Element Methods for Non-Linear Dynamic Problems” (Currently President PAMASIA, Huntsville, AL) Ronald Zab, Ph.D. 1990 “Thermal Response of Sprag Clutches” (Vice President Engineering Joy Mining Machinery) Subodh Kumar Mital, Ph.D. 1989 “Interface Behavior in Reinforced Concrete” (Currently at NASA Glenn Research Center and University of Toledo) Joseph J. Rencis, Ph.D. 1985 “Self Adaptive Mesh Refinement Process for the Boundary Element Methods” (Currently Professor and Chair, Department of Mechanical Engineering, University of Arkansas) Rupasiri Purasinghe, Ph.D. 1985 “Finite Element Analysis of Static and Dynamic Structural Engineering Problems using Semi-Explicit Methods” (Currently Professor and Chair, Department of Civil Engineering at California State University Los Angeles). Master of Science Students (Thesis Option) Jay J. Oswald, 2005 “Modeling of Canted Coil Springs and Knitted Spring Tubes as High Temperature Seal Preload Devices” Sean Bates (Dental Medicine), 2004 (with Prof. Dean) “Non-Destructive Determination of the Correlation of Skull Radiodensity to Stiffness and Strength in a Fresh-Frozen Cadaver” Ai Liu, 2003 (with Prof. Welsch) “Characterization of Mechanical Properties of Lightweight Nickel/Graphite Cell Composite” Guruprarsad Ramanathan, 2002 (with Profs. Welsch and Panoskaltsis) “Experimental Analytical and Computational Methods for Shape Memory Alloys” Noureddine Tayebi, 2000 (with Prof. Ballarini) “Fracture Toughness of Polysilicon MEMS Devices” Zhaoyang Chu, 2000 (with Prof. Ballarini) “Monte Carlo Simulation of Elastic Properties of Polycrystalline Materials Using the Johnson-Mehl Model” Brian Patrick Thornton, 1999 (with Prof. Ballarini and Lando) ”Mechanochromic Behavior of Diacetylene Polymers”

Yumin Yin, 1997 “Monte Carlo Simulation of Effective Elastic Constants of Polycrystalline Thin Films” Venkatesh Rajagopal, 1997 “Non-Linear Finite Element Analysis of Multi-Layered Composites “ Alec C. Patton, 1996 (with Prof. Perdikaris) “Effect of Concrete Coatings of Freeze Thaw Durability and Moisture Diffusion” Saiyad Shah, 1995 “Sensitivity Analysis of the Human Mandible Using Three Dimensional Finite Element Method” Shih-Kang Hsu, 1994 “Boundary Element Modeling of Electric and Displacement Fields in Two-Dimensional Piezoelectric Material” Uday Kumar Dikshit, 1994 “Transient Finite Element Analysis of Non-Linear Piezoelectric Material “ Ranjan Jha, MS 1994 “Fluid Flow Modeling in Surface-Micromachined Electromechanical Devices” Tanuj Bansal, MS 1993 “Impact Behavior of Multilayer Coating Systems” Inderkumar D. Jain, MS 1991 “Neural Networks in Constitutive Modeling and Structural Optimization” Jesus-Adolfo Acosta, 1990 (with Prof. Figueroa) “Implementation of the Video Image Processing Technique for Evaluation of Pavement Surface Distress” Janghang Wang, 1990 (with Prof. Huckelbridge) “Quantification of the In-Service Load Environment of an Aircraft Wheel” Yik-Loon Lee, MS 1989 “Theoretical Analysis of Constrained Blister Test and Its Application to Paint and Glass” J Zab, 1988 “Calculation of Stress Fields at Ceramic Interfaces” Mongi Ben Ouezdou, 1984 “Finite Element Methods for Friction Problems”

Master of Science Students (Project Option) S. Sharran, 1988 “Computer Image Analysis for Photoelastic Stress Analysis” Steve Winegar, 1987 “Program for Translation of Heat Transfer Data to Structural Models” Antonius S. Kurniawan, 1985 “Finite Element Program for Journal and Bearing Deformations” Kakhdar Toumache, 1985 “Analysis of the Effect of Cooling Hole Plugging in Brake Disk” Mohamed Chabaat, 1984 “A Comparison of Finite and Three-dimensional Finite Element Solutions to Elastic Plastic Beams” Riaz Ahmad, 1984 “Effect sf Preheat on the Adhesive Strengths of Plasma Sprayed Ceramic Coatings” Dia M. Atassi, 1983 “Estimated Shear Deflection in a Plate Supported at Four Corners” Jalil Bin Omar, 1983 “Analysis of Elastic Spring Back During Rolling”

RESUMÉ (September 2008)

ROBERT LOUIS MULLEN Courses Taught

Case Western Reserve University Semester Course Number Name Credit Hours Number of Students Fall 2008 ENGR 200 Statics and

Strength of Materials

3 153

Summer 2008 ENGR 200 (Instructor of record)

Statics and Strength of Materials

3 22

Summer 2008 ECIV 310 (Instructor of record)


3 10

Spring 2008 ECIV 360 Civil Engineering Systems

3 9

Spring 2008 ECIV 420 Finite Elements 3 6 Fall 2007 ENGR 200 Statics and


3 177



3 10



3 22

Spring 2007 ECIV 420 Finite Elements 3 10 Spring 2007 ECIV 360 Civil

Engineering Systems

3 12

Fall 2006 ENGR 200 Statics and Strength of Materials

3 84



3 9



3 14


3 22


3 69

Summer 2005

ECIV 310 (Instructor of record)


3 11



3 19

Spring 2005 ECIV 420 Intro to Finite Elements

3 15


3 22

Fall 2004 ENGR 200


3 35



3 11



3 27


3 6

Spring 2004 ENGR 200 Statics and Strength of Materials

3 109

Fall 2003 ECIV 510 Advanced Finite Elements

3 3



3 17


3 12


3 10

Fall 2002 ECIV 320 Structural Analysis I

3 5

Summer 2002 ENGR 200 Statics and Strength of Materials

3 22

Spring 2002 ECIV 360 Civil Eng. Systems

3 14


3 113


3 14

Spring 2001 ECIV 360 Civil Eng. Systems

3 18


3 14


3 23

Summer 2000 ENGR 200 Statics and Strength of Materials

3 22


3 17


3 65


3 19


3 102

Summer 1999 ECIV 110 Mechanics 3 6 Summer 1999 ENGR 200 Statics and


3 4


3 22

Fall 1998 ECIV 110 Mechanics 3 32 Fall 1998 ECIV 320 Structural

Analysis I 3 16


3 11


3 18


3 14


3 15


3 25

Fall 1996 ECIV 260 Civil 3 23

Engineering Systems


3 2


3 18


3 26

Fall 1995 ECIV 260 Civil Engineering Systems

3 26

Spring 1995 ECIV 110 Mechanics 3 45 Spring 1995 ECIV 420 Intro to Finite

Elements 3 27


3 26

Fall 1994 ECIV 260 Civil Engineering Systems

3 19


3 30


Analysis I 3 16


3 3


3 23

Spring 1993 ECIV 110 Mechanics 3 31 Fall 1992 ECIV 220 Structural

Analysis I 3 13

Fall 1992 ECIV 110 Mechanics 3 55 Fall 1992 EMSE 409 Mechanical and

Thermal Processing of Metals

Guest Lecturer


4 29

Spring 1992 ECIV 110 Mechanics 3 58 Fall 1991 ECIV 220 Structural

Analysis I 3 12


3 8


4 26

Spring 1991 ECIV 110 Mechanics 3 58


3 12


3 8


4 22

Spring 1990 ECIV 210 Strength of Materials

3 19


Analysis I 3 19


Elements 4 6


4 13


Analysis I 3 7


4 17


3 9

Fall 1986 ECIV 510 Adv. Finite Elements

3 4


4 13


Analysis I 3 11


Elements 4 22


3 16


3 10


4 32

Fall 1983 ECIV 396 Fortran for Civil Engineers

1 6

Fall 1983 ECIV 110 Mechanics 3 45 Fall 1983 ECIV 210 Strength of

Materials 3 49

Spring 1983 ECIV 420 Intro to Finite 4 22

Elements Fall 1982 ECIV 220 Structural

Analysis I 3 10


3 15


Elements 4 59

Fall 1981 ECIV 110 Mechanics 3 45 Fall 1981 ECIV 411 Elasticity 3 15 Spring 1981 ECIV 221 Structural

Design I 3 14


4 12

Fall 1980 ECIV 210 Strength of Materials

3 57

Fall 1980 ECIV 411 Elasticity 3

Research Funding Summary R. L. Mullen Oct. 2008

Award Year Source Role Duration Amount Title

1980 ORA-CWRU PI 1 year $900.00Study of a Non-conforming Finite Element Discretization Without Corner Nodes

1982 NSF PI 2 years $48,000.00 Development of Super Stable Explicit Integration Methods1982 NASA PI 2 years $71,000.00 Thermo chemical Effects During Component Rubs1984 CASC (I) PI 2 years $64,000.00 Modeling of Coating Flow and Solvent Evaporation1985 NASA PI 1 year $50,000.00 Analysis of Helicopter Overriding Sprag Clutch

1985 CAPRI (I) PI 1 year $50,000.00Mechanical Modeling of Bonding Phenomena in Advances Structural Composites

1986 CASC (I) PI 2 years $60,000.00 Modeling of Oven Drying

1986 NASA PI 3 years $210,000.00Thermo mechanical Response of Helicopter Sprag Clutches

1987 EPIC (I) PI 18 months $75,000.00 Finite Element Modeling of Composites

1990 O-DOT PI 1 year $75,000.00Feasibility Study to Implement the Video Image Processing Technique for Evaluation Pavement Surface Distress

1991 EPIC (I) PI 2 years $64,000.00 Modeling Impact of Multilayer Composites

1991 O-DOT PI 3 years $228,000.00Video Image Processing for Evaluations Pavement Surface Distress

1991 NASA Co-pi 1 year $20,000.00Feasibility Study of a Micro Miniature Surface Shear Stress Sensor

1991 NSF Co-pi 3 years $300,000.00 Theoretical Modeling of MEMS1992 Micro Med (I) Co-pi 1 year $106,000.00 Microfabricarted medical devices

1992 DARPA Co-pi 3 years $1,000,000.00 A Multidisciplinary Research Proposal for Advanced MEMS

1992 NASA Co-pi 1 year $72,000.00prototype development of a micro miniature surface shear stress sensor

1993 Micro Med (I) Co-pi 3 months $29,000.00 Micro fabricated Devices for Medical Applications

1993 NASA Co-pi 1 year $70,000.00Development of a micro miniature surface shear stress sensor

1994 NSF PI 3 years $350,000.00 Material Failure Analysis (MEMS)1994 Ohio Regents Co-pi 1 Year $1,200,000.00 Civil Infrastructure Equipment1994 NASA PI 1 year $113,408.00 Fatigue Crack Growth of Advanced Materials1995 Draper Labs PI 1 year $50,000.00 Mechanical properties of Polysilicon1995 O-DOT PI 2 years $91,000.00 Concrete Sealants1995 O-DOT PI Fellowship $10,000.00 Modeling Diffusion in Sealants1996 NASA PI 1 YEAR $115,184.00 Fatigue Crack Growth of Advanced Materials1997 NASA PI 1 YEAR $112,726.00 Fatigue Crack Growth of Advanced Materials

Research Funding Summary R. L. Mullen Oct. 2008

Award Year Source Role Duration Amount Title

1997 NSF PI 3 years $280,000.00Stress Chromic Polymeric Coatings of Visual Detection of Overstress Conditions

1997 NSFCo-pi (one of 2) 3 years $280,000.00

Measurement and Modeling of Thermo mechanical Behavior of Shape Memory Alloys

1997 NSF PI 3 years $340,000.00Development of Fuzzy Based Methods (With University of Maryland)

1997 NORD-CWRU PI 1 year $10,000.00 Development of a Java based Structural Analysis System1998 NASA PI 1 year $230,158.00 Fatigue Crack Growth of Advanced Materials

2002 NSFCo-pi (one of 3) 3 years $800,001.00 Dynamics and Plasticity of a Micromechanical System

2003 NASA Co-pi 1 year $128,000.00Modeling and Evaluation of High Temperature Seal Preloading Devices

2004 NSF Co-pi 1 year $44,823.00

Workshop on Reliable Engineering Computing; Savannah Campus of Georgia Institute of Technology; Savannah, Georgia; September 15-17, 2004

2004 Sun Microsystems Co-pi 1 year $5,000.00

Workshop on Reliable Engineering Computing; Savannah Campus of Georgia Institute of Technology; Savannah, Georgia; September 15-17, 2004

2006 DOT

local pi (one of 6 schools) 4 years $2,000,000.00 Ohio Transportation Center

2006 NSF Co-pi 1 year $25,000.00

Workshop on Modeling Errors and Uncertainty in Engineering Computations; Savannah, Georgia; February 22-24, 2006

2008 NASA Pi 8 months $81,000.00 Mesh Free Analysis of Lunar Soils

2008 NSF Co-pi 1 year $25,000.00 Workshop on Imprecise Probability in Engineering Design

2008 Sun Microsystems Co-pi 1 year $5,000.00 Workshop on Imprecise Probability in Engineering Design2008 Ohio University PI 1 year $105,000.00 Integrated OU-CWRU Civil Engineering Ph.D. Program

Total Research Funding $8,994,200.00

(I) is an industrial sponsor

robert louis mullen education - university of … matrix structural analysis program for special...

Documents