rip sim

EXAMTUT

Newer Post Older Post

CCNA RIPv2 SimulationPosted on

Central Florida Widgets recently installed a new router in their Apopka office. Complete the network installation by

performing the initial router configurations and configuring RIPv2 routing using the router command line interface (CLI)

on the Apopka router.

To configure the router (Apopka) click on the console host icon that is connected to a router by a serial console cable

(shown in the diagram as a dashed black line).

Each of the windows can be minimized by clicking on the [-]. You can also reposition a window by dragging it by the title

bar.

TheTabkeyandmostcommandsthatusetheControlorEsckeysarenotsupportedandarenotnecessarytocomplete this simulation. The help command does not display all commands of the help system.

Configure the router per the following requirements:

Name of the router is Apopka

Enable-secret password is ish555ana

The password to access user EXEC mode using the console is New2Rtr

The password to allow telnet access to the router is sir890us

IPv4 addresses must be configured as follows:

Ethernet network 209.165.201.0/27routerhassecondassignablehostaddressinsubnet.Serial network is 192.0.1.128/28routerhaslastassignablehostaddressinthesubnet.Interfaces should be enabled. Routing protocol is RIP v2.

Answer:

Watch video in HD

The Adobe Flash Player or an HTML5 supported browser is required for video playback. Get the latest Flash Player

Learn more about upgrading to an HTML5 browser

Step 1: Change the Hostname

Router>enable

Router#configure terminal

Router(config)#hostname Apopka

Step 2: Configure enable secret password

Apopka(config)#enable secret cisco20

Step 3: Configure console password

Apopka(config)#line con 0

Apopka(config-line)#password RouterApass

Apopka(config-line)#login

Apopka(config-line)#exit

Step 4: Configure telnet (VTY) password

Apopka(config)#line vty 0 4

Apopka(config-line)#password scan180



Step 5: Assign IP address for LAN and WAN interfaces

Note: With reference to the topology, interface Fa0/0 used to connected to Apopka LAN Switch and interface S0/0/0

used to connect to the router Tamba.

The IP address of Fa0/0 should be the second usable IP address of the subnet 209.165.200.0/27.

From the about IP Calculator, the network address will be 209.165.200.0 and the broadcast address will be

209.165.200.31. The second assignable host address is 209.165.200.2

Apopka(config)#interface fa0/0

Apopka(config-if)#ip address 209.165.200.2 255.255.255.224

Apopka(config-if)#no shutdown

Apopka(config-if)#exit

The IP address of S0/0/0 must be the last IP address of the subnet 192.0.1.142/28.

Again using IP Calculator, we can find the last IP address of this subnet will be 192.0.1.142 and the subnet mask will be

255.255.255.240.

Apopka(config)#interface s0/0/0




Step 6: Enable routing protocol RIPv2

Apopka(config)#router rip

Apopka(config-router)#version 2

Apopka(config-router)#network 209.165.200.0


Apopka(config-router)#end

Step 7: Save the configuration

Apopka#copy run start

Destination Filename [startup-config]: [ENTER]

The End

This entry was posted in CCNA, CCNA Simulation . Bookmark the permalink.

Reverse address lookup Job interview question Job description administrative assistant

System Administrator Windows registry cleaner Display Cases

6 Responses so far.

Anonymous says:November 16, 2013 at 6:44 AM

Error, the Network in Ex. and in Video is 192.0.2.128 not as here in the description "192.0.1.128"

Serialnetworkis192.0.1.128/28routerhaslastassignablehostaddressinthesubnet.

Thx a lot :)


Is a pkt available?

Adi says:February 6, 2014 at 2:48 AM

Hello Guys good news for you that CCNA discounted and Microsoft vouchers are now available. Now

New CCNA (200-120) vouchers on special discount of 58% for World wide, with six months expiry date till you

purchase. Each voucher cost 70USD.

Details Required For CCNA Voucher For Discount Processing:

1-Full Name. 1st Name & Last Name (as you want to appear on certificate & documents)

2-Country.

3-City.

4-State.

5-Pin Code (or Area Code)

6-Residential Address (or where you can collect your Certificate or further correspondence

can be received)

7-Date of birth

Add me on Skype through this information which is written below:

Skype Name: rockon660

you can also email me at this email address which is written below:

[email protected]

If you have any Questions feel free to contact me.

Thanks,

Best regards,

Adeel

aStr4l says:February 11, 2014 at 3:55 AM

The Ethernet network is 209.165.201.0/27 not 209.165.200.0/27

Anonymous says:March 8, 2014 at 9:25 AM

the ip address of S0/0/0 is 192.0.2.142 255.255.255.240 not 192.0.1.142

GV says:March 12, 2014 at 6:24 PM

Helloall..IvepassesmyCCNAexamyesterday3/11/14andIhaventreceivedanyemailfromCiscosayingthatIvepassedtheexam.IwasjustwonderinghowlongwouldittakeforCiscotosendacongratulatoryletter. Can someone help me out with this. I need it ASAP for my job..

Leave a Reply

Enter your comment...

Comment as: Google Account

PublishPublish PreviewPreview

Popular Posts

New Questions in CCNA 200-120 (HSRP, VRRP, NetFlow, SNMP)

The below are mock questions that were about to appear in exam CCNA 200-120. Updated : 14

th October 2013 Download the La...

CCNA EIGRP Simulation (NEW)

After adding Interior router, no routing updates are being exchanged between Perimeter and the

new location. All other inter connectivity...

CCNA Access List Control (ACL) Simulation

A network associate is adding security to the configuration of the Corp1 router. The user on host

C should be able to use a web...

Access Control List (ACL) Simlet

An administrator is trying to ping and telnet from Switch to Router with the results shown below:

For this ...

Incorrect Questions in Cisco.Acme.640-802.v2013-08-06.by.Acme.649q.vce

Download the new version : http://www.4shared.com/file/7JUsXd3b/640-802v2.html? updated

on 9/27/2013 ...

CCNA VLAN Simulation

This task requires you to use the CLI of Sw-AC3 to answer five multiple-choice questions. This

does not require any configura...

CCNA RIPv2 Simulation

Central Florida Widgets recently installed a new router in their Apopka office. Complete the

network installation by performing the ini...

CCNA NAT Simulation

A network associate is configuring a router for the weaver company to provide internet access.

The ISP has provided the company six pu...

CCNA NAT Simulation

A network associate is configuring a router for the Weaver company to provide internet access.

The ISP has provided the company six public I...

CCNA Routing and Switching (200-120)

CCNA Composite Exam: The 200-120 CCNAX is the composite exam associated with the Cisco

CCNA Routing and Switching certification. Candida...

Links

CCNA Simulation

CCNP ROUTE Simulations

Popular Posts

New Questions in

CCNA 200-120

(HSRP, VRRP,

NetFlow, SNMP)

The below are mock questions that

were about to appear in exam

CCNA 200-120. Updated : 14 th

October 2013 Download the La...

CCNA EIGRP

Simulation (NEW)

After adding

Interior router, no

routing updates are being

exchanged between Perimeter and

the new location. All other inter

connectivity...

CCNA Access List

Control (ACL)

Simulation

A network

associate is adding security to the

configuration of the Corp1 router.

The user on host C should be able to

use a web...

Access Control List

(ACL) Simlet

An administrator is

trying to ping and

telnet from Switch to Router with

the results shown below: For this ...

Incorrect

Questions in

Cisco.Acme.640-

802.v2013-08-

06.by.Acme.649q.vce

Download the new version :

http://www.4shared.com/file/7JUsXd3b/640

802v2.html? updated on 9/27/2013

...

CCNA VLAN

Simulation

This task requires

you to use the CLI

of Sw-AC3 to answer five multiple-

choice questions. This does not

require any configura...

CCNA RIPv2

Simulation

Central Florida

Widgets recently

installed a new router in their

Apopka office. Complete the

network installation by performing

the ini...

CCNA NAT

Simulation

A network

associate is

configuring a router for the weaver

company to provide internet access.

The ISP has provided the company

six pu...

CCNA NAT

Simulation

A network

associate is

configuring a router for the Weaver



six public I...

CCNA Routing and

Switching (200-

120)

CCNA Composite

Exam: The 200-120 CCNAX is the

composite exam associated with the

Cisco CCNA Routing and Switching

certification. Candida...

Category List

CCNA (37)

CCNA Basic (4)

CCNA Cisco IOS (3)

CCNA Drag & Drop (3)

CCNA Frame Relay (2)

CCNA RIP Route (2)

CCNA Routing (4)

CCNA Simulation (7)

CCNA STP (1)

CCNA Subnetting (4)

CCNA Switching (2)

CCNA VLAN (1)

CCNP (2)

CCNP Simulation (2)

ICND1 (1)

ICND1 Simulation (1)

Blog Archive

2013 (42)

November (2)

New Questions in CCNA

200-120 (HSRP, VRRP,

NetFlow...


October (3)

September (21)

August (16)

2013Examtut | Privacy Policy

Find us on Facebook

Acme Infotek

701 people like Acme Infotek.

Facebook social plugin

LikeLike

Generated with www.html-to-pdf.net Page 1 / 6

EXAMTUT









bar.









Answer:

Watch video in HD




Router>enable



























255.255.255.240.














The End




6 Responses so far.




Thx a lot :)


Is a pkt available?







2-Country.

3-City.

4-State.



can be received)

7-Date of birth




[email protected]


Thanks,

Best regards,

Adeel







Leave a Reply




Popular Posts












For this ...



on 9/27/2013 ...







CCNA NAT Simulation



CCNA NAT Simulation






Links

CCNA Simulation


Popular Posts

New Questions in

CCNA 200-120

(HSRP, VRRP,

NetFlow, SNMP)





CCNA EIGRP

Simulation (NEW)

After adding

Interior router, no




connectivity...

CCNA Access List

Control (ACL)

Simulation

A network




use a web...

Access Control List

(ACL) Simlet

An administrator is

trying to ping and



Incorrect

Questions in

Cisco.Acme.640-

802.v2013-08-

06.by.Acme.649q.vce




...

CCNA VLAN

Simulation

This task requires

you to use the CLI




CCNA RIPv2

Simulation

Central Florida

Widgets recently




the ini...

CCNA NAT

Simulation

A network

associate is




six pu...

CCNA NAT

Simulation

A network

associate is




six public I...

CCNA Routing and

Switching (200-

120)

CCNA Composite





Category List

CCNA (37)

CCNA Basic (4)

CCNA Cisco IOS (3)



CCNA RIP Route (2)

CCNA Routing (4)

CCNA Simulation (7)

CCNA STP (1)

CCNA Subnetting (4)

CCNA Switching (2)

CCNA VLAN (1)

CCNP (2)

CCNP Simulation (2)

ICND1 (1)


Blog Archive

2013 (42)

November (2)



NetFlow...


October (3)

September (21)

August (16)


Find us on Facebook

Acme Infotek



LikeLike


rip sim

Documents