24, rue Salomon de Rothschild - 92288 Suresnes - FRANCETél. : +33 (0)1 57 32 87 00 / Fax : +33 (0)1 57 32 87 87Web : www.carrenoir.com

TOTALTOTAL_brand_block_CMYK30/01/2014

RÉFÉRENCES COULEUR

M100% Y80%

M48% Y100%

C100% M80%

C70% M30%

M100% Y80%

K70%

Resins for rotomolded fuel tanks

© C

ourt

esy

Elka

met

(D)

Refining & Chemicals

DIESEL TANK: LUMICENE®

• Grades available in form of pellets and powders, natural, black and colored • 100% recyclable

GRADE Density1

(g/cm3)Melt flow rate2 UV RATING Flexural Modulus3

(MPa)Typical Fuel Applications

Certifications for fuel tanks

M3421UV 0,934 2,7 UV 20 590

Diesel

TÜV ECE R34 Annex 5 and EU directive 2006/96/EC

M3581UV 0,935 6 UV6 / UV16 700

M4041UV 0,940 4 UV 20 730

1 - (ISO 1183) | 2 - 2.16kg - 190°C g/10min (ISO 1133/D) | 3 - (ISO 178)

REGULATIONS AND FUEL TANK PERMEATION REQUIREMENTS

Applications Agency Fuel Temperatures Limit TPSeal® + Polyamide Rilsan® ROTO 11

Motorcycle and Recreational Vehicles EPA CE10 28°C <1,5g/m2/day ✔

Small Off-Road Equipment CARB C 40°C <1,5g/m2/day ✔

Marine, Lawn and Garden EPA CE10 28°C <1,5g/m2/day ✔

WHAT The Rotomolding Solution to Meet Stringent CARB and EPA Fuel Permeation RegulationsTwin layer: TPSeal® M3670 or M3671 outside with Polyamide Rilsan® ROTO 11 inside

BENEFITS• Meets CARB (Californian Air Resources Board) requirements (<1.5g/m2/day)• Ultra-low permeation to fuel CE10 (10% ethanol) – Meets EPA (Environmental Protection Agency)

requirements (<1.5g/m2/day) • Excellent permeation resistance to higher alcohol fuels• Two layer composite system with excellent adhesion - Critical to ensure low permeation, especially to alcohol containing fuels - No loss of adhesion when tank is drilled and tapped or when mechanical inserts are installed• Passes SAE J1241 motorcycle fuel tank lateral impact test• Passes SAE J288 snowmobile fuel tank impact test• Passes US Coast Guard regulation for permanently installed marine fuel tanks• Excellent toughness and impact resistance APPLICATIONSMotorcycle, Recreational Vehicles, SORE (Small Off-Road Equipment), Agricultural, Industrial, Lawn and Garden, Marine and Automotive.

GASOLINE TANK: TPSEAL®

VISIT US: www.totalrotomolding.com | CONTACT US: rotomolding@total.com - fuelsystems@total.com® Registered trademark of Total

Information contained in this publication is true and accurate at the time of publication and to the best of our knowledge. The nominal values stated herein are obtained using laboratory test specimens. Before using one of the products mentioned herein, customers and other users should take all care in determining the suitability of such product for the intended use. Unless specifically indicated, the products mentioned herein are not suitable for applications in the pharmaceutical or medical sector. The Companies within Total Refining & Chemicals do not accept any liability whatsoever arising from the use of this information or the use, application or processing of any product described herein. No information contained in this publication can be considered as a suggestion to infringe patents. The Companies disclaim any liability that may be claimed for infringement or alleged infringement of patents.

Desi

gn b

y w

itvro

uwen

.be

- 09-

2014

In partnership with