residential design guidelinescdn3.blocksassets.com/assets/mirvac-dev/...these guidelines have been...
TRANSCRIPT
-
RESIDENTIAL DESIGN GUIDELINESStage 7.2
-
`
These guidelines have been prepared to assist Gainsborough Greens purchasers (and their builders/designers) to construct well designed, quality homes and to join Mirvac to create great places for life.
The guidelines will help you add value to your home and protect your investment.
Great design improves your quality of life and fosters an image for Gainsborough Greens, making it a highly desirable place, a place in which you will be proud to live.
RESIDENTIAL DESIGN GUIDELINES
ATTRACTIVE STREETSCAPESThese guidelines will assist in making your home part of an attractive streetscape. This is achieved by using the right materials and colours and including some cost effective design to the front façade. It does not have to cost a lot to have a house that looks great.
HOME SIZEThe size of your home is a personal choice and at Gainsborough Greens it is not a requirement to have a bigger house than you want. However it is required that the width of your house suits the lot you have chosen.
FENCINGFences which are visible from the street are an important part of the streetscape. So at Gainsborough Greens we ask that you spend a little more on these fences but for most lots this is only a short length and the balance of the fencing can be economical pine neighbourhood friendly type.
LANDSCAPINGA great way to set make your home individual is landscaping. We ask that you include landscaping that will grow into an attractive low maintenance front yard that complements the parks and bushland that is a great part of Gainsborough Greens. The guidelines show how this can be done a budget.
CONTENTS
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Lot Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Minimum Building Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Private Open Space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Garages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Front Entry Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Facade Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
External Wall Materials & Colours . . . . . . . . . . . . . . . . . . . . . . . . 4
Roofs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Privacy & Cross Viewing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Security & Insect Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
External Services & Waste Recycling . . . . . . . . . . . . . . . . . . . . 6
Driveways & Entry Paths . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Fences General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Landscaping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Construction Obligations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Developer Works . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
General Siting & Setbacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Building Setbacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Duplexes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Built to Boundary Walls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Site Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Dwelling Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Annexures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Annexure A – Stage Plan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Annexure B – Setback Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Annexure C – Fence Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Residential Design Guidelines Gainsborough Greens Stage 7.2
-
GENERAL• The character of your home must be of a contemporary
architectural aesthetic or design. It should reflect the natural characteristic of Gainsborough Greens and be sympathetic to the natural colour tones. No federation or colonial design elements should be included in the design.
• The design of your home, fences and landscaping must be approved by the Design Committee.
• Your builder also needs to obtain the statutory approvals required by Government.
• Construction cannot commence until you have both of these approvals.
LOT TYPESRefer to the plan in Annexure A to identify your lot type and locate your Zero Lot Boundary if applicable.
MINIMUM BUILDING SIZE• For lots with only one street frontage, the minimum width
of your home is 75% of the primary street frontage width, measured to the outside of walls.
• For corner lots the minimum width and length is 65% of the respective frontage.
• The highest point of the roof of your home must not exceed 8.5m above the As Constructed Site Level.
PRIVATE OPEN SPACE• Lots with a frontage of 12.5m must provide a minimum
of 30m2 of private open space. No part of this space will be less than 4m in width.
• Lots with a frontage of 14m or more must provide a minimum of 40m2 of private open space. No part of this space will be less than 5m in width.
• If a duplex dwelling, then 25m2 is required per dwelling (total 50m2). No part of this space will be less than 4m in width.
• Private open space may be split into different areas providing the minimum area is at least 10m2.
• Must be accessible from a living room, dining room or kitchen, provided these areas are on ground level.
• Part of the private open space may be roofed.
• Private open space cannot include service courts.
• Gradients for private open space must not exceed one in ten (1:10).
GARAGES• Garages must be integrated into the main building and
are to be setback a minimum of 1m behind the main building front wall and 5.5m from the street boundary.
• Maximum width of your garage is nominally 6m.
• Minimum internal garage dimensions are 5.7m deep and 5.7m wide.
• Minimum two car internal garage and minimum one off road visitor car space (in driveway and wholly within the lot).
• Carports are not permitted.
FRONT ENTRY DOOR• Your home’s front door must be well defined and/or visible
from the primary street.
• The entry must have a minimum width of 1200mm.
The entry door must be either:
- Nominal 1200mm wide with minimum 20% glazing, or
- Nominal 800mm wide timber door with clear finish combined with a minimum 200mm wide sidelight.
• Other combinations may be approved on merit if they achieve a positive addition to the façade of your home.
32 Residential Design Guidelines Gainsborough Greens Stage 7.2
-
FACADE DESIGNPrimary Street Façade Design
• The residential character of your home must be of a contemporary architectural aesthetic or design. It should reflect the characteristics of Gainsborough Greens, embracing the natural bushlands and open spaces, with sympathetic colour tones and material palette.
• The façade must have variation in the elevation with at least one substantial projecting feature element such as a portico, verandah or feature wall.
• Excluding eave overhangs, steps & entry paths, any portico is to be a minimum of 4m2 and 1.5m deep.
• At least 1 habitable room should address the primary street frontage.
• Similar homes with similar façades are not allowed on adjoining lots.
• Obscure windows or windows to toilets and bathrooms should not front the primary street. If they do they must be aesthetically screened.
• Walls over 9m in length without windows or articulation are not permitted.
• No garden sheds, air conditioning condensers or clothes lines, etc. can be located between the primary street façade and boundary.
Secondary Street Façade Design
• If your home is on a corner lot, it must be designed to address all streets.
• It must have variation in the secondary street façade with at least one substantial projecting feature element such as a portico, verandah or feature wall.
• Walls over 9m in length without windows or articulation are not permitted.
• At least 1 habitable room should address the secondary street frontage.
• No garden sheds, air conditioning condensers or clothes lines, etc. can be located between the secondary street façade and boundary unless they are screened from view from a Public Area by approved screens or fences.
Glazing to Public Areas
• All façades (excluding the garage door) are to include glazing for a minimum 10% of the façade area to provide surveillance, interest and variation.
• Sliding windows under 1200mm width are not permitted.
• Reflective glass is not permitted.
• Temporary window treatments or vertical blinds are not permitted.
EXTERNAL WALL MATERIALS & COLOURS• To give a sense of variety and interest, a mix
of materials or colours must be used to all walls of your home facing a street or park frontage.
• A minimum of 2 and a maximum of 3 variations of colour and/or materials (excluding windows, doors and garage doors) must be incorporated.
External Wall Materials
• Face brickwork or split-face block work is not permitted on primary street, secondary street or public open space façades except as a feature only.
• Finished to the Primary Street and or Secondary Street Facade must return back around the other walls and extend back:
a) For built to boundary walls, the full length of the wall, or
b) For other walls to the first change in the vertical plane of the wall or window or door edge (excluding corner windows).
• Finishes to any non-feature masonry on primary street and secondary street façade must be solid render not ‘bag and painting’.
• Finishes to any non-feature masonry on public open space façades may be ‘bag and painting’ and the finish used on this façade must also be used on the adjoining side and/or rear walls.
• Double or 1.5 height face brick is not permitted anywhere.
• Second hand materials are not permitted unless they are used as highlight architectural elements.
Wall Colours
• Your colour scheme must be primarily muted tones, but limited and controlled feature highlight colours may be approved.
• Each application is to be accompanied by an External Colour Schedule clearly showing/nominating the location and extent of colours and materials.
ROOFS• 40 degrees is the maximum pitch for traditional
hip and gable roofs.
• All single storey houses are to have a minimum of 450mm eaves to all publicly visible façades.
• All double and triple storey houses are to have a minimum of 450mm eaves to all publicly visible façades on ground level, and a minimum of 450mm eaves must be provided to all elevations on the upper storey.
Your roof materials are limited to
• Corrugated pre-finished metal sheets (e.g. Colorbond).
• Roof Tiles.
PRIVACY & CROSS VIEWINGPrivacy between your home and your neighbours’ homes is to be achieved by one or more of the following measures
• Obscure glazing to all bathrooms and toilets.
• 1.7m high sill levels above floor level.
• External screens.
• 1.8m high dividing fence for ground floor windows.
• Where a direct view from a verandah or deck exists into the Private Open Space of an adjoining home, the outlook must be screened by privacy screens that have openings that make it not more than 25% transparent.
4 Gainsborough Greens Stage 7.2 5 Residential Design Guidelines
-
FENCES GENERAL• All fences to your lot must be approved
by the Design Committee.
• Only fences of the types shown in Annexure C are allowed. No other materials such as Colorbond or bamboo are allowed.
• Fences constructed by Mirvac on any lots cannot be removed or altered without written permission from Mirvac. Any damage to these fences must be repaired to the original standard by the land owner(s).
• Fences visible form Public Areas must be maintained on an ongoing basis including recoating with timber treatment if detailed as part of the fence type.
• As per the Federal Government Koala Management Plan, all lots are required to have side & back fences.
Fencing Facing the Primary Street
• Must be in accordance with Fence Type 2 or 3 and maximum 1.8m in height.
• Must be located a minimum of 1m behind the adjoining front façade wall.
Fencing Facing the Secondary Street
• Must be type 2A, 3 or 4 with and a maximum of 1.8m in height.
• May not extend past the façade line of the other street frontage.
• Must be located inside the secondary street boundary by a minimum of 0.5m.
• Fences more than 10m in length must be articulated further from the boundary, to allow for planting alcoves, by a minimum 0.5m alignment variation over a minimum length of 3m.
• Appropriate landscaping must be included within the setback area.
Fencing to Side & Rear Boundaries Not on a Public Open Space Boundary
• Must be a friendly neighbour fence in accordance with Fence Type 1 (except as detailed below).
• Maximum 1.8m in height.
• Must not be visible from Public Areas.
• The portion of the side or rear fence which protrudes forward of the fence facing the Primary or secondary street must be the same type as the Primary or secondary street fence.
Fencing to Public Open Space Boundaries
• Must be Fence Type 4.
• Must be a maximum of 1.2m high.
Fences in Special Locations
In particular circumstances the above fence rules may be relaxed as follows:
• Private Open Space which adjoins Public Open Space or is north facing and adjoins a primary street frontage, may have fencing to provide privacy, based on the following criteria:-
- The design of the fence must ensure surveillance of Public Areas;
- May be forward of the building line on the Primary Road frontage;
- May extend for the length of the Private Open Space only, to a maximum of 50% of the frontage length;
- The maximum fence height shall be 1.8m;
- The fence can be solid up to a height of 1.2m with any part of the fence above 1.2m in height being 50% transparent; or the fence can be at least 25% transparent overall where the transparency is consistent across the full area of the fence i.e. transparent sections cannot be located solely at ground level;
- Setback a minimum of 1m from the property boundary;
- Includes appropriate landscaping within the 1m setback area; and
- Materials must complement the built form and must be of a high quality finish.
• Where a fall hazard greater than 1000mm in height exists forward of the front of your home, fencing is permitted to mitigate this risk, provided it meets the following criteria:
- Height must be 1000mm and the design must comply with any applicable building codes. It is the lot owner’s responsibility to ensure compliance with all relevant codes.
- Must be consistent in design with Fence Types 2, 3 or 4. Note some modifications may be required in order for the fence to meet any building codes applicable at the time.
- Must include a minimum 0.5m of landscaping to screen the fence between the wall and the fence.
SECURITY & INSECT SCREENS• The style of any screen visible from a Public Area
must be of a simple profile. Hexagonal or ornate historical styles are not permitted.
• Frames and screens must match the colour of the door or window frames or be dark grey or black in order to reduce their visual impact.
• Security shutters or security blinds over windows are not permitted if visible from a Public Area.
EXTERNAL SERVICES & WASTE RECYCLING• If you have a rainwater tank it must be located
away from or screened from view from all Public Areas.
• Meter boxes must be painted to match the wall colour.
• TV antennae, satellite dishes and radio masts are not permitted unless they are not visible from Public Areas or neighbouring homes.
• Storage tanks for solar hot water systems, roof and wall mounted air conditioning units, clothes drying facilities, garbage bins and service yards are not to be visible from Public Areas.
DRIVEWAYS & ENTRY PATHSThe driveway to your home must meet the following criteria
- One driveway is permitted per lot, with the exception of duplex lots.
- Minimum 3m separation from neighbouring driveway unless relaxation obtained from Gold Coast City Council.
- Maximum driveway gradients is 1:4, with grades greater than 1:8 having appropriate transition zones.
- Acceptable materials include coloured concrete, exposed aggregate concrete and pavers on a concrete base slab. These must compliment the external colour scheme of your home.
• The main pedestrian entry path to your home must be constructed from a permanent hard surface such as coloured concrete, exposed aggregate, natural stone or concrete pavers on a concrete base.
• Side paths must be constructed from similar materials to the main entry path or decorative gravel on compacted road base. Material selection must reflect and integrate with the surrounding landscape.
7 Residential Design Guidelines Gainsborough Greens Stage 7.2 6
-
CONSTRUCTION OBLIGATIONS• Your building site must be clean and safe
at all times.
• Your builder must provide a skip bin or enclosure on site to contain rubbish for the duration of the construction period.
• Bins and site facilities should be clear of all neighbouring properties, roads, footpaths, reserves and all other Public Areas at all times.
DEVELOPER WORKS• Where the Developer has constructed a fence,
entry statement or retaining wall, it is to be maintained by the owner to the standard to which it was constructed.
• Any damage caused during construction of a dwelling to any estate infrastructure (e.g. kerbs, grassed verges, street trees, bollards, etc.) is to be repaired by the owner to the standard to which it was constructed.
LANDSCAPING• The landscaping to areas of your lot visible
from Public Areas must be approved by the Design committee.
• The planting theme to be adopted is generally of a native character. All trees, shrubs, and ground covers must be selected for their appropriateness according to their proposed situation.
• Planted garden beds must be provided to a minimum of 50% of the available soft landscaping area forward of the building line on the primary street frontage and 20% of the available soft landscaping area forward of the building line on the secondary street frontage (if applicable), with high quality turf installed to the remainder of soft landscaping areas.
• Generally, a 50/50 ratio of shrubs to ground covers will establish suitable variety and form.
• A minimum of two advanced trees (minimum size of 45L stock and 1.8m tall at the time of planting) must be provided to the landscape areas between your house and the verge.
• Gardens should be edged with concrete, galvanized steel, masonry or regular shaper treated timber, but not round timber or logs.
Retaining Walls• A retaining wall is defined as any retaining structure
higher than 200mm.
• All retaining walls must be constructed as part of the construction of your home.
• Retaining walls visible from Public Areas must be constructed from either stone, masonry, concrete or steel.
• Retaining walls may need to be certified by a Registered Professional Engineer. You are required to meet the Local Authorities requirements with regard to this matter.
• Retaining wall construction must include a suitable drainage system to deliver sub-surface water below the wall to the local storm water system.
• Retaining wall heights must not exceed 1.5m without constructing a horizontal offset including a minimum 1m planting zone between each section of the retaining wall to soften the visual impact.
• If a fence is constructed at the top of a retaining wall, there must also be a 0.5m planting zone between the top of the wall and the fence.
Sheds• Must be located behind the front building line
and screened from view from a Public Area.
• Must be painted or stained to suit the colour scheme of the home. Reflective materials are not permitted.
• Must be less than 12m2.
• Must be less than 2.1m in height.
98 Residential Design Guidelines Gainsborough Greens Stage 7.2
-
GENERAL SITING & SETBACKSRefer to the applicable setback table in Annexure B for information for Siting and Setback requirements. Ensure that you refer to the right information for your lot type.
• If your lot has a Zero Lot Boundary your home does not have to have a Built to Boundary Wall. If it does not, the setbacks that apply to that elevation are in accordance with the building code.
If your lot has a boundary to Public Open Space then the design of your home needs to include for the façade facing the Public Open Space:
• 3m minimum setback for the main building wall.
• 1.5m minimum set back to the outer most projection including patios, verandas or balconies if they are unenclosed on at least 3 sides.
• Viewing to the Public Open Space provided by:-
- Windows and/or doors, with a minimum area of 6m2, to a Living Area; or
- Balcony, patio or veranda of at least 8m2 with a minimum dimension of 2m with direct access to a Living Area.
BUILDING SETBACKS• All building setbacks for all single and two (2) storey
dwelling are to be in accordance with the Setback Tables and Lot Typologies included as Annexure B and C of this document.
• Setbacks are to be measured to the face of the dwelling wall (or face of garage door for garages).
• Permitted Encroachments are permitted within the setback zone up to within 450mm of the property boundary (except for nominated Built to Boundary property boundaries where encroachments may extend up to the boundary).
• Where a lot is subject to a bushfire buffer no part of the dwelling, including outer most projections may extend beyond the buffer.
DUPLEXES• Duplex dwellings may be attached or detached.
• Driveways on duplex dwellings must be located on different street frontages.
• Duplex dwellings must have only one driveway and pedestrian access per road frontage.
Permitted Encroachments:
Include eaves, awnings, sun screens, privacy screens, architectural features such as gatehouses and pergolas (where not enclosed and not more than 2.4m high when proposed at the boundary).
Garden walls, fences and other landscape features are permitted within setback zones providing individual elements are not more than 2m in height.
REAR SETBACK
SID
E S
ET
BA
CK
Bu
ilt t
o b
ou
nd
ary
GARAGE SETBACK
BALANCE OF FACADE
STREET
EXAMPLE ONLY
BUILT TO BOUNDARY WALLS• All lot boundaries that permit a built to boundary
wall are shown on the Lot Plan included in Annexure A of this document.
• It is not mandatory to build to boundary.
• Second storey walls of built to boundary walls must be setback a minimum of 1 metre from the property boundary.
• Built to boundary walls must not extend for more than 9 metres on the boundary without a recess for 3 metres which must be a minimum 1 metre deep.
• Built to boundary walls must not have any openings or windows.
• Built to boundary walls must not encroach over the property boundary.
SITE COVERLots 601m2 or larger
• A maximum site coverage of 60% of the site area is permitted.
Lots 600m2 or smaller
• A maximum site coverage of 60% of the site area is permitted and an additional 10% site cover is permitted for covered Private Open Space.
• Site coverage is to be measured to the face of the wall, except to garages which shall be measured to the face of the door. For covered Private Open Space it shall be measured to the outer most projection of the roof structure.
• Site coverage calculations are to exclude un-roofed stairs and ramps, window hoods, un-roofed pergolas and golf buggy parking.
DWELLING ACCESS• The garage and driveway access for all
dwellings must be by the road frontage identified (if indicated) on the Lot Layout Plan in this document.
• The primary pedestrian access must be from the road frontage identified (if indicated) on the Lot Plan in this document.
• Pedestrian access may be from multiple road frontages if the allotment has more than one road frontage.
11 Residential Design Guidelines Gainsborough Greens Stage 7.2 10
-
DEFINITIONS
As Constructed Site Level
The existing level of your lot as constructed during the civil works completed by or on behalf of Mirvac.
Built to Boundary Walls
Walls built on the Zero Lot Boundaries. These walls are to have no windows or other openings.
Design Committee
The entity appointed by Mirvac authorized to approve building applications under these Residential Design Guidelines.
Façade Elevation of a building visible from a Public Area. The primary façade is the elevation facing the primary street.
Living Areas The internal part of your home excluding utility areas such as garage, laundry, bathroom, toilet, hall ways and storage areas.
Permitted Encroachments
Eaves, awnings, sun screens, privacy screens, architectural features such as gatehouses and pergolas where not enclosed and not more than 2.4m in height.
Primary Street The street fronting your lot where the lot has only one street frontage; or for lots with two or more street frontages the street which your home’s front door faces.
Private Open Space
External areas of your lot with an area and dimensions as required by Annexure B with internal Living Areas opening onto them via a door with a minimum width of 1.5m and not containing any service items such as bin store, air conditioning condensers or rainwater tanks, etc. It may be roofed or un-roofed.
Public Area Any land vested to, or under the control of the Gold Coast City Council. E.g. roads, verges /nature strips, parks, public access ways, etc.
Public Open Space
Public Area excluding roads and verges/nature strips.
Setback Is the distance the external wall of your home (or for garages the garage door) must be away from the adjacent boundary. All setbacks are measured from the relevant boundary to the outer edge of the wall. Permitted Encroachments are permitted to extend into the side setback to a minimum of 450mm off the boundary in accordance with the Building Code of Australia, except for built to boundary walls where no part of the building will encroach over the boundary.
For lots with a bushfire setback buffer the setback to the outermost projection to the buffer line is zero.
Site Coverage Is the gross floor area of your home including any ancillary areas/structures (e.g. alfresco, porch shed, etc.) contained under a fully impermeable roof divided by the total lot area. Open pergola structures are not included.
Internal area is measured to the outside walls (or garage door for garages). Covered private open space is measured to the outer most projection of the roof structure.
Secondary Street
Applies to lots with more than one street frontage and is the street(s) which is not the primary street.
Zero Lot Boundary
Common boundary of your lot and the neighbouring lot as shown in Annexure A which part of an external wall your home may be permitted to abut. Walls should be sufficiently clear of this boundary to allow for gutters and eaves overhangs. Generally a Zero Lot Boundary is located on either the southern or western property boundary. Not all lots have a Zero Lot Boundary and no lot can have more than one a Zero Lot Boundary.
12 Gainsborough Greens Stage 7.2 13 Residential Design Guidelines
-
ANNEXURE A: STAGE 7.2 LOT PLAN
KOSC
IUSZ
KO C
IRC
UIT
KOSC
IUSZ
KO C
IRC
UIT
KOSC
IUSZK
O CIRC
UIT
GREA
T SAN
DY CIR
CUIT
GR
EAT
SAN
DY
CIR
CU
IT
FUTU
RE
RES
IDEN
TIA
LFU
TUR
E R
ESID
ENTI
AL
KING
S CO
LLEG
E
CAR
PARK
FUTU
RE RE
TAIL
GREA
T SA
NDY
CIRC
UIT
GREA
T SAN
DY CI
RCUIT
BU
TTER
LEA
F C
RES
CEN
T
BUTT
ERLE
AF C
RESC
ENT
CONIM
BLA S
TREE
T
BARA
KEE S
TREE
T
NANG
AR ST
REET
TOO
NU
MB
A S
TR
EE
T
SUND
OWN C
IRCUIT
SUND
OWN C
IRCUIT
MOWB
RAY S
TREE
T
KUMB
ATINE
STRE
ET
MOUN
T ROY
AL ST
REET
GOLD
COAS
T RAIL
WAY
PA
RK
&
PL
AY
GR
OU
ND
SP
OR
TS
FIE
LD
S
1190
1191
1192
1193
1194
11951
196
11
97
11
98
11
99
12
00
12
01
12
02
12
03
12
04
12
05
12
06
1210
1207
1208
1209
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1108
1107
1106
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1176
1177
1178
1179
1181
1180
1182
1183
1184
1185
1186
1187
1188
1189
1080
10
79
10
78
10
77
1076
1075
1074
1073
1072
1071
1070
1069
1068
1067
1066
1065
1064
1063
1062
1061
1060
1059
1058
1057
1056
1055
1014
1015
1016
1017
1018
1019
1020
1021
1022
1027
1028
1029
1030
1031
1032
1033
1034
1041
1040
1039
1038
1037
1036
1035
1047
1046
1045
1044
1043
1042
1048
1049
1050
1051
1052
1053
1026
1025
1024
1023
1104
1103
1102
1101
1100
1099
1098
1097
1096
1095
1094
1093
1092
1091
1054
1105
1081 10
82
1083
1084
1085
1086
1087
1088
1089
1090
1175
1174
1173
1172
1167
1166
1165
1168
1169
1170
1171
1144
1143
1142
1141
1140
1139
1138
1137
420m
2
375m
2
420m
2
420m
2
420m
2
375m
2
375m
2
375m
2
375m
2
375m
2
540m
2
375m
2
420m
2
420m
2
555m
2
525m
2
375m
2
375m
2
375m
2
375m
2
375m
2
375m
2
420m
2
420m
2
420m
2
450m
2
670m
2
530m
2
555m
2
375m
2 375m
2 375m
2 375m
2
375m
2
375m
2 420m
2
375m
2
375m
2
475m
2
500m
2
465m
2
475m
2 410m
2 465m
2
480m
2
420m
2
525m
2
375m
2
670m
2
410m
2 475
m2
540m
2
375m
2
375m
2 375m
2 560m
2
530m
2
375m
2
375m
242
0m2
375m
2 375m
2
470m
2
425m
2
430m
2
490m
2
375m
2
435m
2
450m
2
470
m2
435
m2
411m
2
474m
2
388m
2
388m
2
388m
2
540m
2 375
m2
660m
2 490
m2
740m
2
375m
2 470m
2
515m
2
515m
2
420m
2
420m
2
420m
2
420m
2
530m
2
530m
2
475m
263
0m2
480m
2
580m
2
500m
2
500m
2
445m
2
420m
2
445m
2
420m
2
420m
2
420m
2
420m
2
420m
2
445m
2
445m
2
540m
2
555m
2
480m
2
420m
2
420m
2
420m
2
420m
2 375
m2
375m
2 375m
2
375m
2 545m
253
0m2
540m
2
540m
2
375m
2
375m
2
420m
2 420m
2
659m
2
375m
2
375m
2
375m
2
375m
2
388m
2
495m
2
635m
2
410m
2
390m
2
390m
2
435m
2
435m
2
435m
2
495m
2
495m
2
495m
2
445m
2
435m
2
435m
2
435m
2
375m
2
610m
2
695m
2
495m
2
550m
2
655m
2
390m
2
635m
2
450m
2
545m
2
475m
2
460m
2
685m
2
610m
2
715m
2
665m
2
585m
2
585m
2
665m
2
575m
2
565m
2
665m
2
485m
2 485m
2
435m
2 540
m2
540m
2
605
m2
605
m2
60
0m
2
44
3m
2
50
5m
2
48
0m
2
600m
2
505m
2
740m
2
460m
2
66
0m
2
480m
2
605m
2480m
2475m
2535m
2415m
2415m
2
480m
2
39
0m
2
39
5m
2
37
5m
2
48
5m
2
10
15
m2
73
0m
2
43
5m
24
85
m2
42
0m
25
40
m2
765m
2
420m
2
390m
2
435m
2
495m
2
450m
2
435m
2
560m
2
545m
2
540m
2
420m
2
375m
2
375m
2
420m
2
435m
2
765m
2
745m
2
540m
2
540m
2
695m
2
540m
2
440m
2
485m
2
23.5
28.3
16.0
16.0
16.0
16.0
18.0
14.0
14.0
12.0
29
.2
29
.8
30
.0
30
.0
22
.7
10.1
10.0
22.7
31.5
30.7
30.0
30.0
14.5
14
.21
4.0
16
.01
4.0
10
.0
10.5
31.0
31.0
31.0
31.0
31.0
31.0
31.0
31.0
31.0
31.03
1.0
31.0
31.0
31.0
31.0
31.0
31.0
31.0
31.0
31.0
31.0
31.0
31.0
31.0
31.0
31.0
30
.831.
8
31.0
38.9
13.5
13.5
12.5
14.0
16.0
16.0
14.5
14.5
14.0
14.0
18.0
13.7
18.0
9.0
6.9
11.6
13.2
13.2
12.5
12.5
14.0
16.0
16.0
16.0
16.0
16.0
16.0
14.0
14.0
14.0
14.4
14.0
14.0
14.0
14.0
14.0
14.0
18.0
14.0 11
.0
11.7
14.0
14.0
12.5
9.2
14.0
11.6
9.8
12.5
12.5
12.5
12.5
15.0
12.5
12.5
31.0
31.0
31.0
31.0
31.0
31.0
12.5
31.4
30.0
30.0
30.0
30.0
30.5
31.0
31.7
30.0
13.5
12.5
12.5
23.1
12.5
12.5
30.0
17.5
12.5
12.5
17.5
17.5
12.5
12.5
17.5
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.1
30.0
30.0
30.0
12.5
12.5
14.0
14.0
14.0
14.0
14.0
14.0
14.0
14.0
14.0
38.1
8.0
41.2
14.0
23.8
12.5
12.5
12.5
12.5
14.0
14.0
16.0
18.0
18.0
18.0
14.0
14.0
14.0
12.5
12.5
18.5
18.5
18.5
12.5
12.5
12.5
12.5
16.0
14.0
14.0
16.0
13.8
14.0
14.0
14.0
14.0
14.0
23.8
31.5
30.0
14.0
18.0
16.0
16.1
16.5
18.0
23.7
30.0
30.0
14.0
12.8
12.5
12.5
12.8
12.5
15.0
19.1
23.5
18.7
31.0
31.0
31.0
32.6
21.2
10.0
25.2
30.0
30.0
30.0
30.0
31.5
31.5
30.0
34.6
31.5
34.6
34.6 3
4.6
24.8
27.5
34.6
34.6
34.6
36.4
36.4
25.317
.9
16.0
27.8
17.8
16.0
18.0
21.5
12.5
15.9
25.6
12.5
31.0
31.0
31.0
32.5
21.5
34.0
34.0
34.0
30.5
34.9
16.0
16.8
18.0
23.5
23.63
0.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
29.6
30.0
30.0
30.0
30.0
30.0
18.0
18.0
18.0
14.0
14.0
12.5
12.5
12.5
14.0
18.0
18.0
18.0
14.0
14.6
14.6
13.6
20.8
24
.82
5.0
20.8
25.6
9.6
12.5
18.0
18.5
18.5
14.7
12.5
9.1
25.8
16.0
16.0
14.0
14.0
14.0
8.3
27.4
14.1
18.7
32.6
32.6
33.1
17.9
33.1
11.9
15.5
39.4
38
.720
.3
20.9
18
.4
18
.4
18
.4
18
.4
21.1
21.1
23
.2
27.8
31
.5
31
.8
30
.0
29
.8
29.8
27.5
27.7
27.7
27.7
27.7
27.7
28.0
19.4
25
.1
30.6
34.8
6.9
14.9 14.0 13.1
7.2
14.0 6.512.8
17.5
21
.43
4.5
13
.0
9.8
12.2
16.0
14.6
14.5
7.4
14.1
6.1
14.0
15.9
18.0
18.0
14.0
14.0
14.0
14.0
16.0
16.0
16.0
20.4
16.0
16.0
14.0
14.0
14.0
17.3
7.5
15.3
15.3
14.0
12.5
14.0
14.0
14.0
14.0
14.0
14.0
14.0
14.0
12.5
12.5
12.5
12.5
17.8
18.7
22.2
24.7
12.5
12.5
14.0
14.0
12.5
12.5
12.5
12.5
12.5
12.5
12.5
14.0
22.8
7.3
12.7
18.5
18.5
17.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
14.0
14.0
14.0
14.0
15.0
15.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0 14
.0
14.0
16.0
16.0
14.0
14.0
16.0
16.0
30.0
30.0
30.0
14.0
14.0
17.5
7.4
15.2
14.0
14.0
14.0
16.0
16.0
18.4
12.8
5.1
5.8
16.0
9.7
10.7
12.0
5.5
6.6
30
.3
30.0
30.0
30.0
29.8
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
17.5
18.0
18.7
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
39
.5
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
16.0
15.7
13.1
22.7
25.4
16.6
9.6
8.1 8.3
12.5
16.8
24.0
24.0
16.0
16.0
27.0
17.4
16.0
12.5
12.5
31.5
12.5
15.0
18.7
14.0
14.4
14.0
14.0
12.5
12.5
12.5
14.0
16.3
16.3
24
.31
4.0
16
.01
4.0
3.0
42.1
22.8
15.8
4.5
10.0
16.513.812.517.2
26.8
12.510.012.5
14.0
14.0
18.0
9.6
29.9
29.8
29.8
29.8
30.0
29.7
16.5
30.0
12.5
30.0
12.5
31.5
31.4
31.0
30.6
30.3
30.0
30.0
30.0
30.0
30.0
30.0
12.5
18.4
17.6
19.3
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
30.0
24.3
5.8
29.2
29.2
29.2
29.2
29.1
29.7
29.3
30.0
12.5
17.4
15.3
16.2
16.7
14.0
16.0
18.0
14.0
18.0
18.0
12.5
23.2
21.3
12.5
14.1
14.0
20.0
16.0
16.0
14.0
14.0
16.5
16.3
12.5
12.5
30.0
12.5
12.5
30.0
12.5
12.5
30.0
12.5
12.5
30.0
12.5
12.5
14.0
14.0
14.0
TH
E
HO
TH
AM
R
EL
EA
SE
This lot layout plan is indicative only and not intended to be a true representation. Changes may be made during the development and are subject to change without notice. This site plan is believed to be correct at the time of construction but is not guaranteed. Prospective purchasers must rely on their own inquiries. Please refer to house plans and specifications as this lot layout plan is for guidance only. Refer to survey plans once lot titles are registered for full specifications. Current as at 7 February 2017..
N
KE
Y12
.5m
Str
eet
Fro
nta
ge
14m
Str
eet
Fro
nta
ge
16m
Str
eet
Fro
nta
ge
18m
Str
eet
Fro
nta
ge
Dup
lex
Ret
ain
ing
Wa
ll
Zer
o L
ot
Line
Pa
thw
ays
Ea
sem
ent
1514 Gainsborough Greens Stage 7.2 Residential Design Guidelines
-
ANNEXURE B: SETBACK TABLES
SETBACKS
*Maximum length of build to boundary wall is 9m without 3m long x 1m deep recess.
Boundary
All lots except Corner & Duplex Lots
Corner Lots Duplex Lots
Ground Floor
First Floor
Ground Floor
First Floor
Ground Floor
First Floor
Primary Street Frontage Setbacks
Garage 5.5m N/A 5.5m N/A 5.5m NA
Balance of Façade 4.5m 4.5m 4.5m 4.5m 3m 3m
Porch or Balcony 3m 3m 3m 3m 3m 3m
Side Setbacks
Built to Boundary (if applicable)
0m* 1m 0m* 1m 0m* 1m
Non Build to Boundary (if applicable)
1.5m 2m 1.5m 2m 1.5m 1.5m
Park or Open Space Frontage
3m 3m 3m 3m 3m 3m
Corner Lot Secondary Road Frontage
N/A N/A 3m 3m 3m 3m
Garage N/A N/A 5.5m N/A 5.5m N/A
Rear Setbacks
Rear 1.5m 2m 1.5m 2m 1.5m 1.5m
Park or Open Space Frontage
3m 3m 3m 3m 3m 3m
1716 Residential Design Guidelines Gainsborough Greens Stage 7.2
-
ANNEXURE C: FENCE TYPES
FENCE TYPE 1 FRONT ON: GOOD NEIGHBOUR PINE FENCE
FENCE TYPE 1 SIDE ON: GOOD NEIGHBOUR PINE FENCE
100x100mm end post H3 Treated
100x75mm Intermediate posts H3 Treated
100x35 H3 treated pine capping with bottom groove
Ground line
450x600mm deep concrete footing
Drainage gravel
Compacted sub grade
2400mm max
18
00
Page 30
100x35 H3 treated pine capping with bottom groove
75x38mm H3 treated HWD rail. Galv bolt fixings through post face.
Fix timber garden edge to base of post when fence separates different surface finishes
450x600mm deep concrete footing
Drainage gravel
Compacted sub grade
100x16mm H3 treated pine palings. Alternate fixing to rails with 25mm overlap. Fix with 2 HD galv. nails
FENCE TYPE 1 EXAMPLE
FENCE TYPE 1 EXAMPLE
1918 Residential Design Guidelines Gainsborough Greens Stage 7.2
-
ANNEXURE C: FENCE TYPES
FENCE TYPE 2 EXAMPLE
FENCE TYPE 2 EXAMPLE
FENCE TYPE 2A FRONT ON: DRESSED HARDWOOD VERTICAL BATTENS
FENCE TYPE 2A SIDE ON: DRESSED HARDWOOD VERTICAL BATTENS
Int. posts 100x75 F14 H3 Treated
End posts 100x100 F14 H3 Treated
18
00
1500
20mm spacing
Note all hardwood timber to be treated with untinted acrylic timber treatment e.g. Intergrain Ultradeck
75x38mm CCA treated HWD rails checked into posts. Fix with galvanised batten screws
20x40mm dpr HWD battens fixed to rails with hot dipped galvanised nails
Fix timber garden edge to base of post when fence separates different surface finishes
450x600mm deep concrete footing
Drainage gravel
Compacted sub grade
18
00
2120 Residential Design Guidelines Gainsborough Greens Stage 7.2
-
ANNEXURE C: FENCE TYPES
100x75mm H3 treated HWD F14 posts at 1m crs behind battens
Ground line
75x20mm DPR HWD battens fixed to posts with H.D. galvanised nails, 5mm gap between batterns
50x50mm H3 treated HWD vertical support fixed to post Fix timber garden edge to base
of post when fence separates different surface finishes
450x600mm deep concrete footing
Drainage gravel
Compacted sub grade
Ground line
18
00
1000mm
Drainage gravel
Compacted sub grade
FENCE TYPE 2B EXAMPLEFENCE TYPE 2B FRONT ON: DRESSED HARDWOOD HORIZONTAL BATTENS
FENCE TYPE 2B SIDE ON: DRESSED HARDWOOD HORIZONTAL BATTENS
2322 Residential Design Guidelines Gainsborough Greens Stage 7.2
-
ANNEXURE C: FENCE TYPES
FENCE TYPE 3 FRONT ON: ROUGH SAWN HARDWOOD
FENCE TYPE 3 SIDE ON: ROUGH SAWN HARDWOOD
Int. posts 100x75 F14 H3 Treated
End posts 100x100 F14 H3 Treated
18
00
1500
20mm spacing
Note all hardwood timber to be treated with untinted acrylic timber treatment e.g. Intergrain Ultradeck
Compacted sub grade
75x38mm H3 treated HWD rails checked into posts. Fix with galvanised batten screws
Fix timber garden edge to base of post when fence separates different surface finishes
450x600mm deep concrete footings
75x25, 38x25 Rough sawn HWD battens fixed alternately with nom 20mm gaps
Drainage gravel
18
00
FENCE TYPE 3 EXAMPLE
2524 Residential Design Guidelines Gainsborough Greens Stage 7.2
-
ANNEXURE C: FENCE TYPES
FENCE TYPE 4 FRONT ON: POOL FENCING
FENCE TYPE 4 EXAMPLE
Compacted sub grade 450x600mm deep concrete footings
Drainage gravel
Black ‘Byron’ aluminium pool fence by ARC Fences or similar
1200mm high pool fence
H3 treated 100x100 end post
Ground line
H3 treated 100x75 intermediate post
12
00
mm
2726 Residential Design Guidelines Gainsborough Greens Stage 7.2
-
CO
VE
NA
NT
AP
PL
ICA
TIO
N F
OR
M
Ve
rsion 1
. Cu
rren
t as a
t Feb
rua
ry 201
5.
Plea
se detach this fo
rm a
nd co
mp
lete deta
ils:
Lot N
umb
er:
Street A
dd
ress:
Pla
ns subm
itted fo
r pre
limina
ry ap
pro
val? (P
lease circle)
YE
S / N
O
Date o
f Sub
missio
n:
Ow
ners D
etails:
Build
ers D
etails:
Na
me:
C
om
pa
ny:
Ad
dress:
C
ontact N
am
e:
Ad
dress:
Co
ntact No
:
Ho
me N
o:
C
ontact N
o:
Mo
bile:
B
usiness No
:
Fax:
Fa
x:
Em
ail:
E
ma
il:
Che
cklist:
Are the fo
llow
ing attached
to yo
ur ap
plicatio
n? Y
ES
/ NO
Site p
lan – includ
ing a
ny site features, all b
ound
ary setb
acks, existing a
nd fi
nal co
ntours
and
north p
oint (m
in. 1
:200 sca
le)
All fl
oo
r pla
ns – including
dim
ensio
ns of b
uilding
setbacks p
lus area
schedules (1
:100 sca
le)
Elevatio
ns with exte
rnal co
lour sched
ule and
mate
rial se
lections ind
icated (1
:100 sca
le)
Exte
rnal co
lour sched
ule and
mate
rial se
lections
Locatio
n of se
rvices such as w
ater ta
nks, rubb
ish bins, a
ir-cond
itioning
units, clotheslines, etc.
Land
scap
e pla
n including
any reta
ining w
alls
Fencing
deta
ils and
locatio
n
$1,0
00 co
vena
nt bo
nd to
be fully refund
ed up
on co
mp
letion o
f the hom
e and
land
scap
ing,
and
fina
l inspectio
n by the GP
DC
.
I/we the o
wne
rs/build
er o
f Lot at G
reen P
ark at P
imp
am
a ackno
wled
ge that I/we have
read
and
accept G
reen P
ark D
esign G
uide
line require
me
nts.
Sig
nature 1:
D
ate:
Sig
nature 2:
Date:
-
07 5549 2322GAINSBOROUGHGREENS.COM.AU
VISIT THE SALES CENTRE Open daily 10am–5pm
M1 Exit 49, Cnr Yawalpah Rd & Swan Rd, Pimpama, QLD 4209
Mirvac does not give any warranty or make any representations, expressed or implied about the completeness or accuracy of any information in this document or provided in connection with it. All photographs, diagrams, drawings, plans or other graphics are indicative only and may not be accurate. This document is not binding on Mirvac and is not intended to be relied upon. All persons should make their own independent enquiries as to the matter referred to in this document. Mirvac expressly disclaims any and all liability relating to, or resulting from, the use, or reliance on, any information contained in this document by any persons. Correct as at 7 February 2017. © Published by Mirvac Pacific Pty Ltd ABN 59 121 949 639. Designed by Bullet Studios.
The masterplan was prepared prior to construction and is indicative only and not intended to be a true representation. Changes may be made to all aspects of the development (including, without limitation, to the layout, composition, streetscape, dimensions, specifications, fittings and finishings) during the development without notice. The masterplan is believed to be correct as at February 2017, but is not guaranteed. Prospective purchasers must rely on their own inquiries. Please refer to individual plans and specifications, as the masterplan is for guidance only.