Rev. 12/17

QUBI-RIO 110Ethernet Relais Module

Ethernet RelayModule

The Ethernet Relay Module is a compact module for test and performance automation. With the 24 relays á 2A it owns a high flexibility and the open Applica-tion Programming Interface. It is easy to start up and use.

Description

The peculiarity of the QUBI-RIO 110 lies in the open programming. The access to the relay is carried out directly via the socket. This means that almost all switching tasks can be implemented flexibly and tailored. The system is independent of the operating system and works without any drivers and no current-software license costs.

Areas of use

With the QUBI-RIO 110 tests with higher loads up to 2A will be per-formed completely automated. With the QUBI-RIO 110 short circuits on Power,- bus line or in/output- triggered by cable breaks - can be simulated quickly and automatically. Furthermore, switching tasks such as the control of traffic lights in the lean production, or the final test can be realized by electronic components.

Applikationen

• Test automation

• endtest in production

• IIOT gateway

• Rleay matrix applications

• Mobile control unit test

Key Features

• 10/100 Mbit/s LAN Schnittstelle

• API in high programming language

• 24 mechanical relays

• standalone time function

• Operating temp.: -40°C ... +70°C

24 Relays 12A

Open API Web Interface

TCP/IP, UDP Plug & Play

XSExtra small DIN Rail

MADEINGERMANY

https://datarespons.solutions

Rev. 12/17

QUBI-RIO 110Ethernet Relay Module

The test unit QUBI RIO 100 is with its 24 12A/240VAC relays and the com-pact und robust design, designed for applications in the verifying and test automation field. The device has two interfaces: USB or Ethernet. Thereby a server client communication is established by the access on the IO-Socket of the system. The programming is possible in the following high level languages like C, C++, C#, Visual Basic, Python, Perl or and PHP is available. With QUBI RIO it is possible to customize and fully automate the simulation of cable bra-kes and short circuits. With the open Application Programming Interface QUBI RIO unifies high standardization with flexibility and customization.

The QUBI-RIO 110 can be easily installed via DIN Rail mounting.

Automation of short circuit tests and simulati-ons of actuators.

All advantages at one glance:

• 24 High performance Relays with 12A

• For all operating Systems ( Windows, Linux etc.)

• Compact and robust

• Standalone mode

• Plug-in-Play start and use

• Open Application Programming Interface

• Supports C, C++, C#, Java, .NET and Python

• No external software needed

• Web interface for quick installation

• Extended Temperature Range (-40°C to +70°C)

• Ethernet and USB communication

https://datarespons.solutions

Rev. 12/17

QUBI-RIO 110Ethernet Relay Module

Order information

Order no. Product-Code Description Number of Relays Relay

006-110-100 QUBI-RIO-100 Ethernet Remote Relay Module 12A 24 12A

006-110-101 QUBI-RIO-110 Ethernet Remote Relay Module 2A 24 2A

Relay specification

Relay 2 A signal relay, SPST-NO

Relay arrangement 24 normally open (Roff ≥ 1MΩ ; Ron ≤ 1Ω)

Switching speed communication 2 ms

Galvanic isolation 2000 V DC between primary/secondary circuit

Switching and feed-through current max. 2 A (per relay)

Switching and feed-through voltage (DC) max. 60 V DC

Switching and feed-through power (DC) max. 30 VA

Switching speed incl. contact bounce 8 ms

Switching frequency max. 100 Hz

Guaranteed switching cycles max. 100.000 switching cycles

Contact resistance (feed-through) max. 0,5 Ω

Isolation resistance relay contacts min. 1 MΩ (test voltage 500 V DC)

Isolation relay contacts to control min. 2000 V AC (test parameters 1mA/50-60Hz/1min)

Recommended load min. 2 mA at 5 V DC

Electrical specification

Supply voltage (Upower) nominal: 12/24/48 V DC

Supply voltage trip level 9,2 V DC

Power connector 2 pole female

Reverse polarity protection min. 60 V DC

Power consumption min. 0,5 W, typ. 2 W, max. 6 W

Peak inrush current typ. 1000 mA, max. 1500 mA (Requirement:Upower=24V for 2ms)

Mechanical specification

Dimension housing (H x W x D) 170 x 115 x 44 mm

Housing IP protection class IP 20

Weight 585 g

Relay contacts connector 12x4 pole spring-loaded terminals

Environment specification

Storage temperature -40°C to +85°C

Humidity non-condensing 35% to 85%

Operating temperature -40°C to +70°C (regard derating note in the manual)

EMC

Immunity DIN EN 61000-6-2 : 2006

Emission DIN EN 61000-6-4 : 2011

https://datarespons.solutions

DenmarkData Respons A/SSmedeholm 10DK-2730 HerlevTel.: +45 88 32 75 00info@datarespons.dk

NorwayData Respons Norge ASSandviksveien 26NO-1363 HøvikTel.: +47 67 11 20 00info@datarespons.no

TaiwanData Respons ASIA18F-6 NO. 738, Chung-Cheng Road, Chung-Ho, New TaipeiTel.: +886 2 8226 2150

Sylog ABJan Stenbecks Torg 17, IIISE-164 40 KistaTel.: +46 (0)8 750 49 00

TechPeople A/SSmedeholm 10DK-2730 HerlevTel.: +45 88 32 75 00

MicroDoc Computersysteme GmbHElektrastrasse 6AD-81925 Munich, GermanyTel: +49-89-551969-0

Main offices

Group HQData Respons ASA Sandviksveien 26NO-1363 Høvik, Norway Tel.: +47 67 11 20 00 info@datarespons.com

GermanyData Respons GmbH Amalienbadstr. 41, Bau 53 DE-76227 KarlsruheTel.: +49 721 480 887 10 info@datarespons.de

SwedenData Respons ABJan Stenbecks Torg 17, III SE-164 40 KistaTel.: +46 8 501 688 00 info@datarespons.se

https://datarespons.solutions