programmable logic controller - gmi.edu.my

1
COURSE OVERVIEW This course is designed to provide participants with the fundamental knowledge of PLC to be used in the various industrial applications. Participants would also be exposed practically to the PLC wiring input and output devices wiring and its programming software. THE UNIQUENESS OF THIS COURSE • Hands-on PLC wiring and programming. • Training is based on industrial applications. • Instructor with a vast industrial exposure. • Opportunity to observe the real industry application of PLC. COURSE DURATION 3 Days. METHODOLOGY Lectures and Practical Exercises PRE-REQUISITE No. WHO SHOULD ATTEND This course is designed to those who are related to the area of robotics as well as in education line. Target Group: Engineers, Technicians, Lecturers and Technical Teachers. CERTIFICATION Certificate of attendance will be issued to those who fulfil 80% of attendance. KEY TOPICS • Introduction • How PLC works • Hardware configuration • Assigning the I/O address • Writing a PLC program • Basic logic operations • Timer functions COURSE FEE RM 1500.00 per participant Minimum Participant: 6 COURSE OBJECTIVES At the end of the module, student / participant should be able to: • Explain the hardware and software elements of PLC. • Connect the input and output devices to PLC and configure the address. • Write and test the ladder diagram for any given basic problem description. • Troubleshoot basic PLC hardware and software problems. KPT(JPS)600-48/B/103(2) NO. PERAKUAN PENDAFTARAN: DK040(B) For further details, please contact: Marketing Section, German-Malaysian Institute (247980-K), Jalan Ilmiah, Taman Universiti, 43000 Kajang, Selangor Darul Ehsan, Malaysia Tel: 03-8921 9191/9046/9322 Fax: 03-8921 9003 Email: [email protected] GPS Coordinate: N 2.934898 E 101.795711 www.gmi.edu.my GMiNewsbreak GERMANMALAYSIANINSTITUTE @gmiofficial92 PROGRAMMABLE LOGIC CONTROLLER BASIC PROGRAMMING

Upload: others

Post on 18-Feb-2022

18 views

Category:

Documents


1 download

TRANSCRIPT

COURSE OVERVIEWThis course is designed to provide participants with the fundamental knowledge of PLC to be used in the various industrial applications. Participants would also be exposed practically to the PLC wiring input and output devices wiring and its programming software.

THE UNIQUENESS OF THIS COURSE• Hands-on PLC wiring and programming.• Training is based on industrial applications.• Instructor with a vast industrial exposure.• Opportunity to observe the real industry application of PLC.

COURSE DURATION3 Days.

METHODOLOGYLectures and Practical Exercises

PRE-REQUISITENo.

WHO SHOULD ATTENDThis course is designed to those who are related to the area of robotics as well as in education line.

Target Group: Engineers, Technicians, Lecturers and Technical Teachers.

CERTIFICATIONCertificate of attendance will be issued to those who fulfil 80% of attendance.

KEY TOPICS• Introduction• How PLC works• Hardware configuration• Assigning the I/O address• Writing a PLC program• Basic logic operations• Timer functions

COURSE FEERM 1500.00 per participantMinimum Participant: 6

COURSE OBJECTIVESAt the end of the module, student / participant should be able to:• Explain the hardware and software elements of PLC.• Connect the input and output devices to PLC and configure the address.• Write and test the ladder diagram for any given basic problem description.• Troubleshoot basic PLC hardware and software problems.

KPT(JPS)600-48/B/103(2) NO. PERAKUAN PENDAFTARAN: DK040(B)

For further details, please contact:Marketing Section, German-Malaysian Institute (247980-K),Jalan Ilmiah, Taman Universiti, 43000 Kajang,Selangor Darul Ehsan, Malaysia

Tel: 03-8921 9191/9046/9322Fax: 03-8921 9003Email: [email protected] Coordinate: N 2.934898 E 101.795711

www.gmi.edu.my GMiNewsbreak GERMANMALAYSIANINSTITUTE@gmiofficial92

PROGRAMMABLELOGIC CONTROLLERBASIC PROGRAMMING