profile demo case - zettler · profile demo case setting up virtual comports: launch com0com setup:...
TRANSCRIPT
Profile Demo Case
15.04.2015
2 Safer. Smarter. Tyco.TM
Profile Demo Case
What’s required?
• PROFILE GUI Demo Case (557.202.839)
• PC(e.g. Notebook)
• PROFILE GUI Demo software package
3 Safer. Smarter. Tyco.TM
Profile Demo Case
Installing the Network Adapter:
Plug in the USB Ethernet Adapter and follow the steps.
4 Safer. Smarter. Tyco.TM
Profile Demo Case
Prepare Network Connection:
For connecting the GUI we need a Network connection.
5 Safer. Smarter. Tyco.TM
Profile Demo Case
Setting up the network connection:
Open Windows Network Connections:
Look for the Installed USB Ethernet Adapter in the Windows network
connections which was installed automatically before.
Right click on the Icon of the Ethernet Adapter and select “Properties”.
6 Safer. Smarter. Tyco.TM
Profile Demo Case
Setting up the network connection:
Change the settings as below and press ok:
• Select “TCP/IPv4” (Version 4)
• Click on “Properties”
• Change to “Use the following IP address”
• Change address to “192.168.1.102”
• Change Subnet mask to 255.255.255.0
• Click “OK”
7 Safer. Smarter. Tyco.TM
Profile Demo Case
Setting up virtual Comports:
Select settings as below and install to default destination folder:
8 Safer. Smarter. Tyco.TM
Profile Demo Case
Setting up virtual Comports:
Security warning about driver installation: Click on “Install” to proceed.
9 Safer. Smarter. Tyco.TM
Profile Demo Case
Setting up virtual Comports:
Launch com0com setup:
It’s important that the Comport number is not higher than 8 because the System only works
with Comports up to 8! In the example below, the setup assistant generate a pair “COM5”
and “COM6”. This 2 Comports will be used for the simulation. Hint: If you got a message “Net Framework 2 or higher is required”, please start “setupg.exe” in
com0com directory manually in case you need if you need to change the com0com settings.
10 Safer. Smarter. Tyco.TM
Profile Demo Case
Select the Virtual Comports for simulation:
Launch settings dialog of PROFILE Demo Case software:
Select the 2 virtual Comports (in this example 5 + 6) and click ok.
\Programs
11 Safer. Smarter. Tyco.TM
Profile Demo Case
The PROFILE GUI Demo Software:
Options:
1. Start the Simulation • Select the Language the GUI(s) should work with
• Select what should be simulated. Options are “GUI Demo
Case”(the real GUI), “Software GUI” or “Both”, connected
Hardware GUI and Software GUI at the same time.
2. Setup the GUI environment Setup instructions for Network and virtual Comports
3. Show this Document
4. Current used virtual Comports
Stop the Simulation
12 Safer. Smarter. Tyco.TM
Profile Demo Case
Set Point in Alarm in MZXChecker:
Left click on a Loop point will set the point to alarm state, left click again
will set the point to normal state. Only if all points in normal state and you
are logged in, a reset on the GUI is possible, in some countries a
“sounder silence” is needed before a reset is possible!
GUI login passcodes:
User:01 passcode: 1111
User:99 passcode: 999999
13 Safer. Smarter. Tyco.TM
Profile Demo Case
Set Point in fault State in MZXChecker:
Right click on loop point will open a popup menu where you can select
the State of this point like “No Response” (fault) or Pre-Alarm and back to
“Normal” State.
14 Safer. Smarter. Tyco.TM
Profile Demo Case
Stop Simulation:
To stop the simulation, >always< click on “Stop Simulation” Button in
the right bottom corner of your Screen. This will stop all Applications
which are used for the Simulation in the right order.
