product seminar

WELCOME TO

SEMINAR ONJK

PRODUCTS

JK White Cement Product Portfolio

Your Smile.. Our Satisfaction

J K WHITE CEMENT

Gotan , Rajasthan

The Organization “JK White Cement Works “ Started the Production Of White

Cement in 1984 at GOTAN (Rajasthan) using the DRY PROCESS technology in Technical Expertise from F.L. Smidth & Company – Denmark

• Production Capacity of 3,00,000 MT of White Cement Per Annum

• ISO – 9001:2000 and 14001 Certified Company by LRQA• OHSAS 18001: 2005 For safety and environmental upkeep• Quality control by FUZZY Logic & QCX which control the

RMP( Raw Mill Proportionate) for the consistency of White Cement

• Innovator for new technology and energy conservation • The Factory is Situated at Gotan (Raj.) having one of the Best

known source of Chemically Pure High Grade Lime stone which is a key ingredient of White Cement ( reserves for next 50 years)

JK White Cement


PRODUCTION CHART

JK White CementUsage Flooring with White cement

Walls with White cement

Plastering

Decorative/Utility

Architectural


Flooring with ..JK White Cement(Under bed for marble) Your Smile..

Our Satisfaction

Marble Being Translucent will reflect part of the background. Hence a white base will Enhance the whiteness of the Marble which Can Be Achieved using JK White Cement

Flooring with ..JK White Cement(Mosaic/In Situ/Pavers) Your Smile..

Our Satisfaction

Mosaic Tles• Different Colors• Designs• Durability ,dense• Water tight• Hard wearing surface• Made & fixed with white cement

Terrazo Flooring • In-Situ Terrazzo • Wide variety of patterns• Various color schemes using the white

cement with pigmentsPavement Blocks Used for road markings, pavements ,

parking lots, foot path & any landscaping Application


Walls with .. JK White Cement( Cement Wash and Designer Wall Tiles )

White Washing with JK White Cement

White wash with white cement gives more life as it is an integral part of the wall

Does not stain clothes. Superior results obtained by

applying Putty

Designer Wall tiles in JK White Cement

Made using white cement Designs of your choice and

imagination

Cement paints are material consisting of White Portland cement and other ingredients like lime, pigments, Hygroscopic salts, water repellants, fungicides, etc (>65% White Cement)

Cement Paints have better performance than distemper paints for out door protection and decoration of building as long as they are manufactured as per BIS Standards

Absence of organic binding materials and the fungi static action of cement paint were considered important hence incorporated.

Cement Paint Uses • White cement is widely used for

decorative water-proof cement paint• For interiors and exteriors• Superior results with putty


IS SpecificationsIS: 5410:1992Reaffirmed -1999

Composition: As per ISWhite Portland cement : 65% (min) Hydrated lime : 25% (max) Pigments and other materials : Depends on

properties (i.e. Alkali resistant, Water repellants, Hygroscopic salts and Fungicides )

Application Substrate:Porous surfaces like Masonry Concrete, Rough plaster except gypsum plaster

Walls with ..JK White Cement( Cement Paint )


Plaster with .. JK White Cement

Sand Face Spray Plaster

For interiors & exteriors Applied with manual or pneumatic machine No primer Required Permanent Finish /Low Maintenance

Expose Aggregiate Plaster

Cement & colored aggregates Aggregates when exposed from plasters Gives an attractive natural look Stone or flint aggregates can be white or colored

or a mixture, to suit design No primer Required Permanent Finish/Low Maintenance

Textured Plaster Textured coating applied on exterior for decoration & protection. Texture is made by chiseling.( Malad Stone) Variety of colors with pigment addition to white cement

Plain Plaster Plain plaster without any texture. Variety of colors with pigment addition to white cement. Plastering is done on grey cement plaster surface which is made

rough by combing

Roller Finished Plaster Special textured rollers are used to give textured & uniform

pattern. Immense design variation possibilities. Variety of colors with pigment addition to white cement.


Plaster with ..JK White Cement

Sponge Finished Plaster• Sponge is used to obtain a special pattern

on surface• Sponge patterns varies with applied

pressure and hardness of sponge• Various colors with pigment addition• Popular for ceiling jobs


Plaster with ..JK White Cement


Decorative/Utility Uses with.. JK White Cement

China Mosaic• Broken pieces of glazed tiles are fixed with in desired pattern• Applied on terrace, parapet walls, swimming pools• Water repellency is served Italia Mosaic• Used on exteriors walls of building for decoration & protection• Also on columns & floors• Glass pieces fixed with white cement Area Markers/Road Dividers/Zebra Crossings• White color of cement Make it a long term solution for Road Divider (

outer layer).• Zebra crossing layed with white cement & other area markers for

parking can give permanent service Pointing On Brick Work /Stone Work• Pointing means filling of joints between bricks/stones with white

cement & colored cement mortar• Imparts beauty as well as protection

Architectural With..JK White Cement

Ornamental Articles

• Notable application is in the moulding of sculptures or ornamental motifs.

PreCast Panels GRC( Glass Reinforced Cement)

• New Technology Ready to use panels of any design

• White or colored panels with different designs and patterns joined together at site to speed up construction

• Equipment is needed to handle and place the panels

• Panels of any size and can be smooth or textured as desired.

• Pillars , Jhalis ,Stone finishes , etc available at a lower cost and in your desired Colour

• Made to order /Tailor made to suit your requirement


JK White Wall Putty


TYPES OF WALL PUTTY JK HAS

JK WALL PUTTY (FINE)

JK WALL PUTTY ( COARSE)

JK Wall Putty ( Skim Coats)

For luxurious and silky interior/exterior finish

Good adhesion with Plastered wall ( Cement to Cement Adhesion)

No primer No Flaking and long life Better glaze & lower consumption of paint

compared to traditional putties


JK Wall Putty (FINE)

Why JK Wall Putty?

White Cement Based

Proper Adhesion to Plaster

Becomes Integral Part of Plaster

Very High Durability and Life

Imparts additional Strength and prevents Flaking in case of seepage

Can be used for Internal as well as external Surfaces


Advantages Over Traditional Putty (POP)

Advantages over Plaster of Paris (POP)

1. White cement based product therefore strength is more than gypsum based POP.

2. J.K. Wall Putty can be applied on exteriors/exposed surfaces whereas the same is not possible with POP.

3. J.K. Wall Putty is very white in appearance while POP is yellowish.

4. In case of J.K. Wall Putty no primer is required before painting, whereas it is compulsory for POP surfaces.

5. J.K. Wall Putty resists seepage while POP does not.

Properties Transverse Strength - 1.7 Kg/cm2

Compressive Strength - 37 Kg/cm2 ( 28 days) Whiteness Index - 93% (28 days)

Pot life - 180 Minutes Water demand by volume - 35 to 40 %

Surface hardness - 3.0 N

Maximum thickness of total - 1.5- 2.5 mm coats

Coverage - 15 Sq Feet/Kg in 2 coats*

Subject to wall condition /Roughness and usage


JK COARSE PUTTY USED IN UNDULATED SURFACE THICKNESS – 4

MM MINIMUM MICRO SAND INCLUDED IN THIS PUTTY SPECIAL PRODUCT AVAILABLE IN 20 KG BAGS. FINAL FINISH WITH FINE PUTTY ONLY. WIDELY USED IN TEXTURE FINISHES IN

ELEVATIONS. CAN GO UPTO 8MM THICKNESS IN 2 COATS.

JK WALL PUTTY..Surface Preparation Your Smile..

Our Satisfaction

Surface Preparation

The surface should be cleaned to make it free from dirt, dust, grease, oil and paint. All foreign impurities should be removed with a wire-brush. Wall surfaces should be cured so that the surface is saturated with water yet in ‘touch dry’ condition.

Treatment of New Surface

The new surface requires only soft treatment such as removal of dust, dirt and foreign matter. In case of cracks, voids and damages; it should be patched up prior to application of J. K. Wall Putty with grey/white cement.

Treatment of Old Surface

All loose material and/ or organic growth must be removed with Putty blade or brush. In case of old painted surface scrub the surface with coarse emery stone/paper.

JK WALL PUTTY.. Application Your Smile..

Our Satisfaction

Preparation of J.K. Wall Putty Paste

J. K. Wall Putty is a fine powder. Mix slowly J. K. Wall Putty with approx. 40% water by volume to prepare paste of desired consistency. Mix vigorously for 5-10 minutes for making lump free, uniform and smooth putty paste. Product should be mixed in required quantities to be used within 2-3 hrs of its preparation.

Application

Apply uniformly the first coat of J.K. Wall Putty with blade/trowel on the wall from bottom to top. Apply second coat after the first coat has dried completely(Min 6 hrs). Limit the total thickness of 2 coats to 2.5 mm. Allow complete drying and then use fine emery paper to remove the application mark if any. Any kind of paint can be applied on this surface. Use water for curing before applying paint.

Precaution

Although J.K. Wall Putty does not contain any toxic material, use rubber gloves while mixing, as prolonged exposure with water may soften the skin resulting in fine cuts/legions due to cement particles. Precaution should be taken to avoid dust inhalation while handling the powder putty.

Storage

Store J.K. Wall Putty in a dry place and open the pack just before use. Keep out of reach of children.

The Authentication…

NCCBM Certification

Third Party Certification


Satisfied Clients ..INDIA Textile Mills

Nuclear Power Project -Kudankulam

Delhi Metro

Reliance

IIT Kanpur

PWD

JUSCO

IJM Hyderabad

Mahindra Gesco

Pharma Industry

Uttar Pradesh State Building Corporation

Unitech

Marathon

Merlin

Shipra

…………………


JAIN HOUSINGProject

Sunder bans

Area-52 Lacs Sqft

Chennai

Recent Projects

L&TPROJECT-COGNIZANT MEPZ

AREA-25LACS SQFT

ARCHITECT- Mr.Karthikeyan & Nagalingam.

CONTRACOR-OVIYAS

LOCATION-TAMBARAM

SANITORIUM, CHENNAI

CEEBROS PROPERTIES&DEVELOPMENT

PROJECT-CEEBROS HOTELS

Area-10 LACS Sqft

NANDANAM, CHENNAI

SOUTH INDIAN SHELTERS

PROJECT-SAFAA

AREA-7.50 LACS SQFT

CONTRACTOR-ABSOLUTE MKTGARCHITECT- Akbar Hussain Akbari

LOCATION-GUDUVANCHERY, OUTSKIRTS CHENNAI

SRM UNIVERSITY

AREA-10 LACS SQFT

LOCATION-VANDALORE, OUTSKIRTS CHENNAI

ARUNEXCELLOPROJECTECSTANCIA

AREA-50 LACS Sqft

CONTRACTORSROYAL DESIGNS&SAIRAM CORPORATION

ARCHITECT-NATRAJ&VENKAT

VELLANCHERRY, OUTSKIRTS CHENNAI

EMAAR

PROJECT-MGF EMAAR

AREA-7 LACS SQFT

CONTRACTOR-OVIYAS

ARCHITECT-CHAKRAPANIatTONDIARPET, CHENNAI

EXPRESS INFRASTRUCTUREEXPRESS AVENUEContractor - Mr. Phillip of IN-DECORS, Exteriorat MOUNT ROAD, CHENNAI

NAVINHOUSING,DAYTONHEIGHTSArea-6.5 Lac

sqft, Architect Mr.W.Anand, at Nelson

Manickam Road Chennai,

ContractorMr.Gandhi ofG-ENTERPRISES

Some Testimonials Your Smile.. Our Satisfaction

Putty Finishes Interiors Your Smile.. Our Satisfaction

Putty Finishes Exterior Your Smile.. Our Satisfaction

JK Water Proofing Compound



JK Water Proofing CompoundWhat Does it Do?

It is a water repellant powder that does not allow water to percolate through the Pores and voids which are prevalent in Normal cement mix caused by capillary action

Without WPCWith WPC


How does it Work?

J.K. Waterproof reacts with alkalis in the concrete forming a highly water-repelling compound in the capillaries and throughout the concrete or mortar. In this way, the surface tension, which would normally draw water into the capillaries and micro cracks does not take place and does not allow propagation of Moisture


BIS Standards

IS- 2645-2003 Strength to be >90% of Neat cement 3 Day

strength

Setting time –Reduction of setting time should not be >25% of Neat Cement

Water Permeability should be <50% of Neat Cement

Chloride test should be < 2% JK Water Proofing more than meets the BIS

Specifications and is IS Certified( IS 4410 ??)


Mixing Ratio

Mixed with cement in a ratio of 2% by weight ( 1kg for every 50 kg Bag)


Onsite Test For Effective Water Proofing Compound

Dispersion Test

Mercury Test

Match stick Test


Some Usages of JK Water Proofing Compound

J.K. Waterproof can be used for following construction activities: -

1.Under bed of foundation or entire raft foundation.

2. At Damp Proof Coarse (DPC) level.

3. Concrete Roads

4.All under-ground halls, basements or water storage tanks.

5. Swimming pools

6. Concreting and masonry work for toilets, bathrooms and kitchens.

7. The external plaster of the walls which falls across the normal rain direction of that area.

8.Construction in coastal areas.

9.Bridges and Fly overs.

And where you can think of…………….

THANK YOU..

Any Questions Please….

product seminar

Business