product information materials testing machine with
TRANSCRIPT
Product InformationMaterials testing machine with hydraulic drive Z400H / Z600H
PI226_Z400H_Z600H.pmd
B2
T1
B1
H1
H3H2
PI 2
26 2
.020
9
Key benefits
• These hydraulic materials testing machines have asingle, central hydraulic drive.
• Optionally available with an adjustable top crosshead,allowing the test area to be adjusted to customers’requirements.
• High-resolution, channel-synchronized measurementtechnology provides extremely precise, accuratedetermination of material characteristic values. Norange-switching is necessary as load signal resolutionis available over the whole range.
• Wide measuring range allows even small test loads tobe determined accurately without re-tooling.
Further advantages and features
• Extremely stiff, robust load frame.
• Standard tests using Zwick testXpert® softwarerequire only single-button operation.
• Modular design throughout the system allows theentire Zwick accessory range to be used, including awide variety of extensometers, specimen grips andother test tools.
• Should new test requirements arise, additional testtools (e.g. calibration blocks) can very easily beinstalled by means of a T-slot or screw system.
• Can be tailored to customers’ specific requirements(e.g. test devices, specimen grips, test speed ranges,testing software).
Figure: Zwick Z600H with hydraulic grips Figure: Drawing of Zwick Z600H with hydraulic grips
Product InformationMaterials testing machine with hydraulic drive Z400H / Z600H
All Data at ambient temperature. All rights reserved.
Model Z400H Z400H Z600H Z600HFmax [kN] 400 400 600 600Top crosshead fixed adjustable fixed adjustableNumber of lead columns 2 2 2 2Stiffness of the load frame at Fmax(without specimen grips and load cell) approx. [kN/mm] 400 400 600 600Dimensions of load frame
H1 – Height [mm] 2913 max. 3213 2913 max. 3213B1 – Width [mm] 1030 1030 1030 1030T1 – Depth [mm] 500 500 500 500
Dimensions of test areaH2 – Height [mm] 1578 max. 1878 1578 max. 1878B2 – Width [mm] 670 670 670 670
H3 – Test stroke max. [mm] 500 500 500 500Test speed max. [mm/min] 340 340 250 250Weight
without tools / specimen grips (with electronics) [kg] 1800 1950 1870 1900with specimen grips [kg] 2500 2550 2470 2700
Specific floor loading [kg/cm2] 1.5 1.5 1.5 1.5Resolution of crosshead travel [μm] 0.16 0.16 0.16 0.16Position accuracy [mm] ± 0.01 ± 0.01 ± 0.01 ± 0.01Item no. • 358416 • 358421 • 358422 • 358423
(BPC-F0400HN.F06) (BPC-F0400HN.M06) (BPC-F0600HN.F06) (BPC-F0600HN.M06)
Enviromental conditionsOperating temperature [°C] +10 ... +35Storage temperature [°C] -25 ... +55Humidity range (not condensing) [%] ≤ 90Electrical connection
Mains voltage 3 Ph/N/PE 1 2 [V] 400Mains frequency [Hz] 50Drive power [kVA] 8.5Fuse [A] 25
Noise level in 1m distance [dB(A)] 67Color coating of rack RAL7011 (iron gray), RAL7038 (agate gray)
1 Three phase AC motor (L1, L2, L3), neutral wire N, protective earth PE2 < ± 10 % related to the mains voltage
Product InformationMaterials testing machine with hydraulic drive Z1200H
PI712_Z1200H.pmd
H1
B1B2
T1
H3H2
PI 7
12 2
.020
9
Figure: Zwick Z1200H with hydraulic grips Figure: Drawing of Zwick Z1200H with hydraulic grips
Key benefits
• These hydraulic materials testing machines have asingle, central hydraulic drive.
• Optionally available with an adjustable top crosshead,allowing the test area to be adjusted to customers’requirements.
• High-resolution, channel-synchronized measurementtechnology provides extremely precise, accuratedetermination of material characteristic values. Norange-switching is necessary as load signal resolutionis available over the whole range.
• Wide measuring range allows even small test loads tobe determined accurately without re-tooling.
Further advantages and features
• Extremely stiff, robust load frame.
• Standard tests using Zwick testXpert® softwarerequire only single-button operation.
• Modular design throughout the system allows theentire Zwick accessory range to be used, including awide variety of extensometers, specimen grips andother test tools.
• Should new test requirements arise, additional testtools (e.g. calibration blocks) can very easily beinstalled by means of a T-slot or screw system.
• Can be tailored to customers’ specific requirements(e.g. test devices, specimen grips, test speed ranges,testing software).
Product InformationMaterials testing machine with hydraulic drive Z1200H
All Data at ambient temperature. All rights reserved.
Model Z1200H Z1200HFmax [kN] 1200 1200Top crosshead fixed adjustableNumber of lead columns 4 4Stiffness of the load frame at Fmax (without specimen grips and load cell) approx. [kN/mm] 1200 1200Dimensions of load frame
H1 – Height [mm] 3411 max. 3769B1 – Width [mm] 1100 1220T1 – Depth [mm] 760 920
Dimensions of test areaH2– Height [mm] 1876 max. 2184B2 – Width [mm] 850 850
H3 – Test stroke max. [mm] 600 600Test speed max. [mm/min] 200 200Weight without tools / specimen grips (with electronics) [kg] 4050 4700 with specimen grips [kg] 5350 6000Specific floor loading [kg/cm2] 1.6 1.8Resolution of crosshead travel [μm] 0.16 0.16Position accuracy [mm] ± 0.01 ± 0.01Item no. • 358424 • 358425
(BPC-F1200HN.F11) (BPC-F1200HN.M11)
Enviromental conditionsOperating temperature [°C] +10 ... +35Storage temperature [°C] -25 ... +55Humidity range (not condensing) [%] ≤ 90Electrical connection
Mains voltage 3 Ph/N/PE 1 2 [V] 400Mains frequency [Hz] 50Drive power [kVA] 15Fuse [A] 32
Noise level in 1m distance [dB(A)] 67Color coating of rack RAL7011 (iron gray), RAL7038 (agate gray)
1 Three phase AC motor (L1, L2, L3), neutral wire N, protective earth PE2 < ± 10 % related to the mains voltage
Product InformationMaterials testing machine with hydraulic drive Z1600H
PI713_Z1600H.pmd
H1
H2H3
B2
B1
T1
PI 7
13 2
.010
9
Figure: Drawing of Zwick Z1600H with hydraulic gripsFigure: Zwick Z1600H with hydraulic grips
Key benefits
• These hydraulic materials testing machines have asingle, central hydraulic drive.
• Optionally available with an adjustable top crosshead,allowing the test area to be adjusted to customers’requirements.
• High-resolution, channel-synchronized measurementtechnology provides extremely precise, accuratedetermination of material characteristic values. Norange-switching is necessary as load signal resolutionis available over the whole range.
• Wide measuring range allows even small test loads tobe determined accurately without re-tooling.
Further advantages and features
• Extremely stiff, robust load frame.
• Standard tests using Zwick testXpert® softwarerequire only single-button operation.
• Modular design throughout the system allows theentire Zwick accessory range to be used, including awide variety of extensometers, specimen grips andother test tools.
• Should new test requirements arise, additional testtools (e.g. calibration blocks) can very easily beinstalled by means of a T-slot or screw system.
• Can be tailored to customers’ specific requirements(e.g. test devices, specimen grips, test speed ranges,testing software).
Product InformationMaterials testing machine with hydraulic drive Z1600H
All Data at ambient temperature. All rights reserved.
Model Z1600H Z1600HFmax [kN] 1600 1600Top crosshead fixed adjustableNumber of lead columns 4 4Stiffness of the load frame at Fmax(without specimen grips and load cell) approx. [kN/mm] 1600 1600Dimensions of load frame
H1 – Height [mm] 3661 max. 4414B1 – Width [mm] 1210 1210T1 – Depth [mm] 1015 1015
Dimensions of test areaH2 – Height [mm] 2076 max. 2834B2 – Width [mm] 800 800
H3 – Test stroke max. [mm] 600 600Test speed max. [mm/min] 250 250Weight
without tools / specimen grips (with electronics) [kg] 5000 5900with specimen grips [kg] 7200 8100
Specific floor loading [kg/cm2] 2.1 2.4Resolution of drive [μm] 0.16 0.16Position accuracy [mm] ± 0.01 ± 0.01Item no. • 010207 • 643074
(BPC-F1600HN.F15) (BPC-F1600HN.M15)
Enviromental conditionsOperating temperature [°C] +10 ... +35Storage temperature [°C] -25 ... +55Humidity range (not condensing) [%] ≤ 90Electrical connection
Mains voltage 3 Ph/N/PE 1 2 [V] 400Mains frequency [Hz] 50Drive power [kVA] 20Fuse [A] 40
Noise level in 1m distance [dB(A)] 67Color coating of rack RAL7011 (iron gray), RAL7038 (agate gray)
1 Three phase AC motor (L1, L2, L3), neutral wire N, protective earth PE2 < ± 10 % related to the mains voltage
Product InformationMaterials testing machine with hydraulic drive Z2000H
PI714_Z2000H.pmd
B1B2
H1
T1
H2 H3
PI 7
14 2
.020
9
Figure: Zwick Z2000H with hydraulic grips Figure: Drawing of Zwick Z2000H with hydraulic grips
Key benefits
• These hydraulic materials testing machines have asingle, central hydraulic drive.
• Optionally available with an adjustable top crosshead,allowing the test area to be adjusted to customers’requirements.
• High-resolution, channel-synchronized measurementtechnology provides extremely precise, accuratedetermination of material characteristic values. Norange-switching is necessary as load signal resolutionis available over the whole range.
• Wide measuring range allows even small test loads tobe determined accurately without re-tooling.
Further advantages and features
• Extremely stiff, robust load frame.
• Standard tests using Zwick testXpert® softwarerequire only single-button operation.
• Modular design throughout the system allows theentire Zwick accessory range to be used, including awide variety of extensometers, specimen grips andother test tools.
• Should new test requirements arise, additional testtools (e.g. calibration blocks) can very easily beinstalled by means of a T-slot or screw system.
• Can be tailored to customers’ specific requirements(e.g. test devices, specimen grips, test speed ranges,testing software).
Product InformationMaterials testing machine with hydraulic drive Z2000H
All Data at ambient temperature. All rights reserved.
Model Z2000H Z2000HFmax [kN] 2000 2000Upper crosshead fixed adjustableNumber of lead columns 4 4Stiffness of the load frame at Fmax(without specimen grips and load cell) approx. [kN/mm] 2000 2000Dimensions of load frame
H1 – Height [mm] 4125 max. 4600B1 – Width [mm] 1255 1400T1 – Depth [mm] 905 1100
Dimensions of test areaH2 – Height [mm] 2236 max. 2829B2 – Width [mm] 850 850
H2 – Test stroke max. [mm] 600 600Test speed max. [mm/min] 200 200Weight
without tools / specimen grips (with electronics) [kg] 7100 8500with specimen grips [kg] 10800 12200
Specific floor loading [kg/cm2] 3.2 3.6Resolution of crosshead travel [μm] 0.16 0.16Position accuracy [mm] ± 0.01 ± 0.01Item no. • 358426 • 750749
(BPC-F2000HN.F15) (BPC-F2000HN.M15)
Enviromental conditionsOperating temperature [°C] +10 ... +35Storage temperature [°C] -25 ... +55Humidity range (not condensing) [%] ≤ 90Electrical connection
Mains voltage 3 Ph/N/PE 1 2 [V] 400Mains frequency [Hz] 50Drive power [kVA] 20Fuse [A] 40
Noise level in 1m distance [dB(A)] 67Color coating of rack RAL7011 (iron gray), RAL7038 (agate gray)
1 Three phase AC motor (L1, L2, L3), neutral wire N, protective earth PE2 < ± 10 % related to the mains voltage