![Page 1: Product Information Materials testing machine with](https://reader031.vdocuments.mx/reader031/viewer/2022012505/6180e07ffdfac94c1d279dd2/html5/thumbnails/1.jpg)
Product InformationMaterials testing machine with hydraulic drive Z400H / Z600H
PI226_Z400H_Z600H.pmd
B2
T1
B1
H1
H3H2
PI 2
26 2
.020
9
Key benefits
• These hydraulic materials testing machines have asingle, central hydraulic drive.
• Optionally available with an adjustable top crosshead,allowing the test area to be adjusted to customers’requirements.
• High-resolution, channel-synchronized measurementtechnology provides extremely precise, accuratedetermination of material characteristic values. Norange-switching is necessary as load signal resolutionis available over the whole range.
• Wide measuring range allows even small test loads tobe determined accurately without re-tooling.
Further advantages and features
• Extremely stiff, robust load frame.
• Standard tests using Zwick testXpert® softwarerequire only single-button operation.
• Modular design throughout the system allows theentire Zwick accessory range to be used, including awide variety of extensometers, specimen grips andother test tools.
• Should new test requirements arise, additional testtools (e.g. calibration blocks) can very easily beinstalled by means of a T-slot or screw system.
• Can be tailored to customers’ specific requirements(e.g. test devices, specimen grips, test speed ranges,testing software).
Figure: Zwick Z600H with hydraulic grips Figure: Drawing of Zwick Z600H with hydraulic grips
![Page 2: Product Information Materials testing machine with](https://reader031.vdocuments.mx/reader031/viewer/2022012505/6180e07ffdfac94c1d279dd2/html5/thumbnails/2.jpg)
Product InformationMaterials testing machine with hydraulic drive Z400H / Z600H
All Data at ambient temperature. All rights reserved.
Model Z400H Z400H Z600H Z600HFmax [kN] 400 400 600 600Top crosshead fixed adjustable fixed adjustableNumber of lead columns 2 2 2 2Stiffness of the load frame at Fmax(without specimen grips and load cell) approx. [kN/mm] 400 400 600 600Dimensions of load frame
H1 – Height [mm] 2913 max. 3213 2913 max. 3213B1 – Width [mm] 1030 1030 1030 1030T1 – Depth [mm] 500 500 500 500
Dimensions of test areaH2 – Height [mm] 1578 max. 1878 1578 max. 1878B2 – Width [mm] 670 670 670 670
H3 – Test stroke max. [mm] 500 500 500 500Test speed max. [mm/min] 340 340 250 250Weight
without tools / specimen grips (with electronics) [kg] 1800 1950 1870 1900with specimen grips [kg] 2500 2550 2470 2700
Specific floor loading [kg/cm2] 1.5 1.5 1.5 1.5Resolution of crosshead travel [μm] 0.16 0.16 0.16 0.16Position accuracy [mm] ± 0.01 ± 0.01 ± 0.01 ± 0.01Item no. • 358416 • 358421 • 358422 • 358423
(BPC-F0400HN.F06) (BPC-F0400HN.M06) (BPC-F0600HN.F06) (BPC-F0600HN.M06)
Enviromental conditionsOperating temperature [°C] +10 ... +35Storage temperature [°C] -25 ... +55Humidity range (not condensing) [%] ≤ 90Electrical connection
Mains voltage 3 Ph/N/PE 1 2 [V] 400Mains frequency [Hz] 50Drive power [kVA] 8.5Fuse [A] 25
Noise level in 1m distance [dB(A)] 67Color coating of rack RAL7011 (iron gray), RAL7038 (agate gray)
1 Three phase AC motor (L1, L2, L3), neutral wire N, protective earth PE2 < ± 10 % related to the mains voltage
![Page 3: Product Information Materials testing machine with](https://reader031.vdocuments.mx/reader031/viewer/2022012505/6180e07ffdfac94c1d279dd2/html5/thumbnails/3.jpg)
Product InformationMaterials testing machine with hydraulic drive Z1200H
PI712_Z1200H.pmd
H1
B1B2
T1
H3H2
PI 7
12 2
.020
9
Figure: Zwick Z1200H with hydraulic grips Figure: Drawing of Zwick Z1200H with hydraulic grips
Key benefits
• These hydraulic materials testing machines have asingle, central hydraulic drive.
• Optionally available with an adjustable top crosshead,allowing the test area to be adjusted to customers’requirements.
• High-resolution, channel-synchronized measurementtechnology provides extremely precise, accuratedetermination of material characteristic values. Norange-switching is necessary as load signal resolutionis available over the whole range.
• Wide measuring range allows even small test loads tobe determined accurately without re-tooling.
Further advantages and features
• Extremely stiff, robust load frame.
• Standard tests using Zwick testXpert® softwarerequire only single-button operation.
• Modular design throughout the system allows theentire Zwick accessory range to be used, including awide variety of extensometers, specimen grips andother test tools.
• Should new test requirements arise, additional testtools (e.g. calibration blocks) can very easily beinstalled by means of a T-slot or screw system.
• Can be tailored to customers’ specific requirements(e.g. test devices, specimen grips, test speed ranges,testing software).
![Page 4: Product Information Materials testing machine with](https://reader031.vdocuments.mx/reader031/viewer/2022012505/6180e07ffdfac94c1d279dd2/html5/thumbnails/4.jpg)
Product InformationMaterials testing machine with hydraulic drive Z1200H
All Data at ambient temperature. All rights reserved.
Model Z1200H Z1200HFmax [kN] 1200 1200Top crosshead fixed adjustableNumber of lead columns 4 4Stiffness of the load frame at Fmax (without specimen grips and load cell) approx. [kN/mm] 1200 1200Dimensions of load frame
H1 – Height [mm] 3411 max. 3769B1 – Width [mm] 1100 1220T1 – Depth [mm] 760 920
Dimensions of test areaH2– Height [mm] 1876 max. 2184B2 – Width [mm] 850 850
H3 – Test stroke max. [mm] 600 600Test speed max. [mm/min] 200 200Weight without tools / specimen grips (with electronics) [kg] 4050 4700 with specimen grips [kg] 5350 6000Specific floor loading [kg/cm2] 1.6 1.8Resolution of crosshead travel [μm] 0.16 0.16Position accuracy [mm] ± 0.01 ± 0.01Item no. • 358424 • 358425
(BPC-F1200HN.F11) (BPC-F1200HN.M11)
Enviromental conditionsOperating temperature [°C] +10 ... +35Storage temperature [°C] -25 ... +55Humidity range (not condensing) [%] ≤ 90Electrical connection
Mains voltage 3 Ph/N/PE 1 2 [V] 400Mains frequency [Hz] 50Drive power [kVA] 15Fuse [A] 32
Noise level in 1m distance [dB(A)] 67Color coating of rack RAL7011 (iron gray), RAL7038 (agate gray)
1 Three phase AC motor (L1, L2, L3), neutral wire N, protective earth PE2 < ± 10 % related to the mains voltage
![Page 5: Product Information Materials testing machine with](https://reader031.vdocuments.mx/reader031/viewer/2022012505/6180e07ffdfac94c1d279dd2/html5/thumbnails/5.jpg)
Product InformationMaterials testing machine with hydraulic drive Z1600H
PI713_Z1600H.pmd
H1
H2H3
B2
B1
T1
PI 7
13 2
.010
9
Figure: Drawing of Zwick Z1600H with hydraulic gripsFigure: Zwick Z1600H with hydraulic grips
Key benefits
• These hydraulic materials testing machines have asingle, central hydraulic drive.
• Optionally available with an adjustable top crosshead,allowing the test area to be adjusted to customers’requirements.
• High-resolution, channel-synchronized measurementtechnology provides extremely precise, accuratedetermination of material characteristic values. Norange-switching is necessary as load signal resolutionis available over the whole range.
• Wide measuring range allows even small test loads tobe determined accurately without re-tooling.
Further advantages and features
• Extremely stiff, robust load frame.
• Standard tests using Zwick testXpert® softwarerequire only single-button operation.
• Modular design throughout the system allows theentire Zwick accessory range to be used, including awide variety of extensometers, specimen grips andother test tools.
• Should new test requirements arise, additional testtools (e.g. calibration blocks) can very easily beinstalled by means of a T-slot or screw system.
• Can be tailored to customers’ specific requirements(e.g. test devices, specimen grips, test speed ranges,testing software).
![Page 6: Product Information Materials testing machine with](https://reader031.vdocuments.mx/reader031/viewer/2022012505/6180e07ffdfac94c1d279dd2/html5/thumbnails/6.jpg)
Product InformationMaterials testing machine with hydraulic drive Z1600H
All Data at ambient temperature. All rights reserved.
Model Z1600H Z1600HFmax [kN] 1600 1600Top crosshead fixed adjustableNumber of lead columns 4 4Stiffness of the load frame at Fmax(without specimen grips and load cell) approx. [kN/mm] 1600 1600Dimensions of load frame
H1 – Height [mm] 3661 max. 4414B1 – Width [mm] 1210 1210T1 – Depth [mm] 1015 1015
Dimensions of test areaH2 – Height [mm] 2076 max. 2834B2 – Width [mm] 800 800
H3 – Test stroke max. [mm] 600 600Test speed max. [mm/min] 250 250Weight
without tools / specimen grips (with electronics) [kg] 5000 5900with specimen grips [kg] 7200 8100
Specific floor loading [kg/cm2] 2.1 2.4Resolution of drive [μm] 0.16 0.16Position accuracy [mm] ± 0.01 ± 0.01Item no. • 010207 • 643074
(BPC-F1600HN.F15) (BPC-F1600HN.M15)
Enviromental conditionsOperating temperature [°C] +10 ... +35Storage temperature [°C] -25 ... +55Humidity range (not condensing) [%] ≤ 90Electrical connection
Mains voltage 3 Ph/N/PE 1 2 [V] 400Mains frequency [Hz] 50Drive power [kVA] 20Fuse [A] 40
Noise level in 1m distance [dB(A)] 67Color coating of rack RAL7011 (iron gray), RAL7038 (agate gray)
1 Three phase AC motor (L1, L2, L3), neutral wire N, protective earth PE2 < ± 10 % related to the mains voltage
![Page 7: Product Information Materials testing machine with](https://reader031.vdocuments.mx/reader031/viewer/2022012505/6180e07ffdfac94c1d279dd2/html5/thumbnails/7.jpg)
Product InformationMaterials testing machine with hydraulic drive Z2000H
PI714_Z2000H.pmd
B1B2
H1
T1
H2 H3
PI 7
14 2
.020
9
Figure: Zwick Z2000H with hydraulic grips Figure: Drawing of Zwick Z2000H with hydraulic grips
Key benefits
• These hydraulic materials testing machines have asingle, central hydraulic drive.
• Optionally available with an adjustable top crosshead,allowing the test area to be adjusted to customers’requirements.
• High-resolution, channel-synchronized measurementtechnology provides extremely precise, accuratedetermination of material characteristic values. Norange-switching is necessary as load signal resolutionis available over the whole range.
• Wide measuring range allows even small test loads tobe determined accurately without re-tooling.
Further advantages and features
• Extremely stiff, robust load frame.
• Standard tests using Zwick testXpert® softwarerequire only single-button operation.
• Modular design throughout the system allows theentire Zwick accessory range to be used, including awide variety of extensometers, specimen grips andother test tools.
• Should new test requirements arise, additional testtools (e.g. calibration blocks) can very easily beinstalled by means of a T-slot or screw system.
• Can be tailored to customers’ specific requirements(e.g. test devices, specimen grips, test speed ranges,testing software).
![Page 8: Product Information Materials testing machine with](https://reader031.vdocuments.mx/reader031/viewer/2022012505/6180e07ffdfac94c1d279dd2/html5/thumbnails/8.jpg)
Product InformationMaterials testing machine with hydraulic drive Z2000H
All Data at ambient temperature. All rights reserved.
Model Z2000H Z2000HFmax [kN] 2000 2000Upper crosshead fixed adjustableNumber of lead columns 4 4Stiffness of the load frame at Fmax(without specimen grips and load cell) approx. [kN/mm] 2000 2000Dimensions of load frame
H1 – Height [mm] 4125 max. 4600B1 – Width [mm] 1255 1400T1 – Depth [mm] 905 1100
Dimensions of test areaH2 – Height [mm] 2236 max. 2829B2 – Width [mm] 850 850
H2 – Test stroke max. [mm] 600 600Test speed max. [mm/min] 200 200Weight
without tools / specimen grips (with electronics) [kg] 7100 8500with specimen grips [kg] 10800 12200
Specific floor loading [kg/cm2] 3.2 3.6Resolution of crosshead travel [μm] 0.16 0.16Position accuracy [mm] ± 0.01 ± 0.01Item no. • 358426 • 750749
(BPC-F2000HN.F15) (BPC-F2000HN.M15)
Enviromental conditionsOperating temperature [°C] +10 ... +35Storage temperature [°C] -25 ... +55Humidity range (not condensing) [%] ≤ 90Electrical connection
Mains voltage 3 Ph/N/PE 1 2 [V] 400Mains frequency [Hz] 50Drive power [kVA] 20Fuse [A] 40
Noise level in 1m distance [dB(A)] 67Color coating of rack RAL7011 (iron gray), RAL7038 (agate gray)
1 Three phase AC motor (L1, L2, L3), neutral wire N, protective earth PE2 < ± 10 % related to the mains voltage