product guide - idatalink
TRANSCRIPT
Revision Date20151001
Document numbeR
notice The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work.
U.S. Patent No. 8,856,780
PRoDuct guiDeiDatastart HC
www.idatalink.comAutomotive Data Solutions Inc. © 2015
U.S. Patent No. 8,856,780
BOX CONTENTS - 1 OF 1
M3 : 10 PIN WHITE
M2 : 12 PIN BLACK M5 : 6 PIN BLUE
M4 : 20 PIN BLACK
M18 PIN BLACK
HC MODULE
BOX CONTENTS
AFTERMARKET HOOD SWITCH AND CABLE
ANTENNADECODER
[1x] 1-WAY REMOTE [1x] 2-WAY REMOTE
[2x] STICKERS
10 PIN WHITE CONNECTOR
12 PIN BLACK CONNECTOR
8 PIN BLACK CONNECTOR
BLUE CABLE WITH 4 PIN BLACK CONNECTORS BLACK CABLE WITH 4 PIN BLUE CONNECTORS
20 PIN BLACK CONNECTOR
4 PIN RED
4 PIN RED
TELEMATIC : 4 PIN BLUE
Included with the HC1, HC2Part Numbers: HC1151AC, HC2351AC, HC2352AC
Included with the HC2Part Number: HC2352AC
Included with the HC2Part Number: HC2351AC
Included with the HC1Part Number: HC1151AC
Included with the HCFPart Number: HCF900A
Included with the HCF, HCX, HC1, HC2Part Numbers: HCF900A, HC1151AC, HC2351AC, HC2352AC, HCX000A
3 PIN BLACK
PROGRAMMINGBUTTON
ANTENNA BUTTON
USB
LED 2
ANTENNA LED
ANTENNA LED
LED 1
RF/WEBLINK : 4 PIN BLACK
2 PIN BLACK
RF PORT : 4 PIN BLACKRF PORT : 4 PIN BLACK
DECODERRF PORT
ANTENNARF PORT
ANTENNA PORT : 4 PIN WHITE
6 PIN WHITE
MODULERF PORT
MODULERF PORT
[2x] 2-WAY REMOTES
[2x] 1-WAY REMOTES
6 PIN BLUE CONNECTOR
www.idatalink.comAutomotive Data Solutions Inc. © 2015 iDatastart HC
Page 2 of 17• 20151001
U.S. Patent No. 8,856,780
MODULE PINOUT - 1 OF 1
79
3
10864
12
5
79
3
108
1112
64
12
5
79
3
108
111314
12
1517181920
16
64
12
5
453
21
6
M3
M2 M5
M1
M4
4
2
8
1
3
5
7
6
M5
M4
01 ORANGE - ACCESSORY (+)01 ORANGE - ACCESSORY (+)02 RED - POWER (30A)02 RED - POWER (30A)03 PURPLE - STARTER (+)03 PURPLE - STARTER (+)
- PROG. 1 - IGNITION 2 (+) (DEFAULT)04 PINK/WHITE - PROG. 1 - IGNITION 2 (+) (DEFAULT)05 PINK - IGNITION (+)05 PINK - IGNITION (+)
07 RED - POWER (30A)07 RED - POWER (30A)08 BLACK - GROUND08 BLACK - GROUND
01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK RELEASE (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK RELEASE (-) OUTPUT04 GREEN/WHITE•BLACK DOT - ARM (-) OUTPUT04 GREEN/WHITE•BLACK DOT - ARM (-) OUTPUT05 GREEN/BLACK•BLACK DOT - DISARM (-) OUTPUT05 GREEN/BLACK•BLACK DOT - DISARM (-) OUTPUT06 BLUE/WHITE•BLACK DOT - GWR (-) OUTPUT06 BLUE/WHITE•BLACK DOT - GWR (-) OUTPUT07 EMPTY07 EMPTY
POC 1 - UNLOCK DRIVER (-) OUTPUT08 WHITE/PURPLE•BLACK DOT - POC 1 - UNLOCK DRIVER (-) OUTPUTPOC 2 - RAP SHUTDOWN (-) OUTPUT09 PURPLE/BLACK•BLACK DOT - POC 2 - RAP SHUTDOWN (-) OUTPUT
POC 3 - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - POC 3 - HORN (-) OUTPUTPOC 4 - STARTER KILL (-) OUTPUT11 BROWN/BLACK•BLACK DOT - POC 4 - STARTER KILL (-) OUTPUT
12 WHITE•BLACK DOT - PARKING LIGHTS (-) OUTPUT
01 BROWN•SILVER DOT - BRAKE (+) INPUT02 BLACK/WHITE•SILVER DOT - E-BRAKE (-) INPUT03 PURPLE•SILVER DOT - DOOR (+) INPUT04 GREEN•SILVER DOT - DOOR (-) INPUT05 PURPLE/WHITE•SILVER DOT - TACH (-) INPUT06 WHITE/BLUE•SILVER DOT - X-TRIGGER (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT08 BLUE•SILVER DOT - TRUNK (-) INPUT09 GRAY/BLACK•SILVER DOT - GLOW PLUG (+) INPUT10 NEGATIVE (-) INPUT
01 EMPTY02 EMPTY03 BROWN/RED04 BROWN/YELLOW05 BLUE/RED06 BLUE/YELLOW07 EMPTY08 ORANGE09 YELLOW10 EMPTY11 GRAY/RED12 GRAY/YELLOW13 GREEN/RED14 ORANGE/WHITE15 BROWN16 ORANGE/BLACK17 PINK18 PURPLE19 RED20 BLACK
M3
M2
M1
06 WHITE - PROG. 2 (10A) - PARKING LIGHTS (+) (DEFAULT)06 WHITE - PROG. 2 (10A) - PARKING LIGHTS (+) (DEFAULT)
02 WHITE/BLACK•BLUE DOT01 GRAY/BLACK•BLUE DOT
04 WHITE/RED•BLUE DOT03 GRAY/RED•BLUE DOT
06 WHITE•BLUE DOT05 GRAY•BLUE DOT
HC MODULE
www.idatalink.comAutomotive Data Solutions Inc. © 2015 iDatastart HC
Page 3 of 17• 20151001
U.S. Patent No. 8,856,780www.idatalink.comAutomotive Data Solutions Inc. © 2015 iDatastart HC
Page 4 of 17• 20151001
COMPATIBLE ACCESSORIES - 1 OF 2
MODULETELEMATIC PORT
DRONE
(NC)
TELEMATIC KIT (accessory sold separately)
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
WEBLINK MOBILE (required accessory sold separately)
MOBILE DEVICE PORT
OBDII CONNECTOR
4 PIN BLACK CABLEMODULE WEBLINK PORT
OBDII CONNECTOR
WEBLINK CABLE (required accessory sold separately)
WEBLINK CABLE
COMPUTERUSB PORT
4 PIN BLACK CABLE
MODULE WEBLINK PORT
U.S. Patent No. 8,856,780www.idatalink.comAutomotive Data Solutions Inc. © 2015 iDatastart HC
Page 5 of 17• 20151001
COMPATIBLE ACCESSORIES - 2 OF 2
RF KITDECODER
DECODER (included with the HCF)
ANTENNA
FLASH THE DECODERBEFORE THE INSTALLATION
DECODERBLUE CABLE BLACK CABLE
(NC) RED(NC) BLACK
BLACK
BLUEMODULERF PORT
RF KIT (sold separately)
4 PIN BLACK CABLE
MODULE RF PORT
RF KIT (included with the HC1 & HC2)
ANTENNA
U.S. Patent No. 8,856,780
>>
01
02
ENGINESTARTSTOP
OFF ACC ON STARTON
03
04
05
ENGINESTARTSTOP
OFF ACC ON STARTOFF
06
>>
VALET MODE PROGRAMMING PROCEDURE - 1 OF 1
NOTE: In Valet Mode, the Remote starter is not functional. Keyless entry, Lock and Unlock will remain functional. See RF kit user manual for alternate valet mode programming.
Time restriction. Complete next step within 7 seconds.
Cycle ignition ON twice [2x OFF/ON] rapidly.
Press and release the BRAKE pedal three times [3x].
Parking Light will fl ash once [1x] then will fl ash twice [2x].
Set ignition to OFF position.
Valet Mode Programming Procedure completed.
To exit valet mode: repeat steps 1 to 5.
www.idatalink.comAutomotive Data Solutions Inc. © 2015 iDatastart HC
Page 6 of 17• 20151001
U.S. Patent No. 8,856,780
>>
01
ENGINESTARTSTOP
OFF ACC ON STARTON
02
03
04
>>
05
06
07
ENGINESTARTSTOP
OFF ACC ON STARTOFF
08
AFTERMARKET REMOTE PROGRAMMING PROCEDURE - 1 OF 1
WARNING: Program aftermarket remotes before usage. A maximum of four [4x] aftermarket remotes per system.
Set ignition to ON position.
Press and release the antenna button, then press and hold the antenna button. The antenna’s leds will turn solid BLUE.
Parking Light will fl ash once [1x].
Press once [1x] on LOCK button of aftermarket remote. The antenna’s leds will fl ash BLUE once [1x].
To program additional remotes: repeat step 5 using each additional remote.
Release the antenna button. The antenna’s leds will turn OFF.
Wait, Parking Light will fl ash twice [2x].
Set ignition to OFF position.
Aftermarket Remote Programming Procedure completed.
www.idatalink.comAutomotive Data Solutions Inc. © 2015 iDatastart HC
Page 7 of 17• 20151001
U.S. Patent No. 8,856,780
oNLINe MoDULe SeTTINgS - 1 OF 7
oPTIoNS SeTTINgS
01 -
REM
OTE
STAR
TER
OPT
ION
01 ENGINE/WAIT TO START
01 gaS02 DIESEL (GLOW PLUG)03 3 SEC04 5 SEC05 10 SEC06 15 SEC07 25 SEC08 45 SEC
02 ENGINE SENSING
01 TaCH02 TACHLESS03 ASSUME START (2)04 ASSUME START (2.5)05 ASSUME START (3)06 ASSUME START (4)07 ASSUME START (5)
03 RUN TIME
01 3 MIN02 5 MIN03 10 MIN04 15 MIN05 25 MIN06 30 MIN07 35 MIN
04 PROGRAMMABLE 4TH RELAY
01 IgNITIoN02 ACCESSORIES03 STARTER04 TRUNK05 PARKING
05 PROGRAMMABLE 5TH RELAY
01 IGNITION02 ACCESSORIES03 STARTER04 TRUNK05 PaRKINg
06 MT ACTIVATION SEQUENCE01 ReMoTe02 2X EBRAKE03 1X EBRAKE
07 MT SHUTDOWN SEQUENCE01 OPEN/CLOSE DOOR02 10 SEC AFTER OPEN/CLOSE DOOR03 ReMoTe
08 WEATHER MODE 01 DISaBLe
oPTIoNS SeTTINgS
01 -
REM
OTE
STAR
TER
OPT
ION
08 WEATHER MODE
02 EVERY 2 HOUR03 EVERY 3 HOUR04 EVERY 4 HOUR05 WITH TEMP SENSOR
09 TEMP SENSOR FOR COLD WEATHER
01 DISaBLe02 -20C/-4F03 -15C/5F04 -10C/14F05 -5C/23F
10 TEMP SENSOR FOR HOT WEATHER
01 DISaBLe02 25C/77F03 30C/86F04 35C/85F05 40C/104F
11 IDLE MODE01 DISABLE02 eNaBLe
12 TURBO TIMER
01 DISaBLe02 30 SEC03 1 MIN04 2 MIN05 4 MIN
13 TAKE OVER BEHAVIOUR01 eNaBLe02 SHUTDOWN WITH DOOR03 SHUTDOWN WITH UNLOCK
14 SECURE TAKE OVER DELAY
01 45 SeC02 90 SEC03 3 MIN04 4 MIN
15 FACTORY KEYLESS RS SEQUENCE
01 DISABLE02 HOLD LOCK 3 SEC03 LOCK, UNLOCK, LOCK04 LoCK, LoCK, LoCK
16 EXTERNAL RS INPUT TRIGGER (X-TRIG
01 DISaBLe02 SINGLE PULSE (-)03 DOUBLE PULSE (-)(-)04 TRIPLE PULSE (-)(-)(-)
05 ANALOG FACTORY KEYLESS X-TRIGGER =LOCK INPUT DOOR(+) =UNLOCK INPUT
17 VALET MODE01 REMOTE OR 5 X IGNITION ON OR 2 X IGN. ON +
3 BRAKE02 REMOTE OR ANTENNA BUTTON ONLYDefault settings are listed in bold.
www.idatalink.comAutomotive Data Solutions Inc. © 2015 iDatastart HC
Page 8 of 17• 20151001
U.S. Patent No. 8,856,780
oNLINe MoDULe SeTTINgS - 2 OF 7
oPTIoNS SeTTINgS
01 -
REM
OTE
STAR
TER
OPT
ION
17 VALET MODE
03 REMOTE OR ANTENNA OR 5 X IGN ON OR 2 X IGN ON + 3 BRAKE
04 REMOTE OR 5 X IGN ON
05 aNTeNNa oR ReMoTe oR 2 X IgN oN + 3 BRaKe
06 5 X IGN ON OR 2 X IGN ON + 3 BRAKE07 ANTENNA BUTTON ONLY
08 ANTENNA OR 5 X IGNITION ON OR 2 X IGN ON + 3 BRAKE
18 HEATED ACC CONTROL
01 AUX TRIGGER02 ALWAYS ON03 -10C/14F04 -5C/24F05 0C/32F06 4C/40F07 8C/46F08 12C/54f
19 COOLED SEATS CONTROL
01 AUX TRIGGER02 ALWAYS ON03 20C/68f04 24C/76F05 28C/82F06 32C/90F07 36C/96F
20 RS PARKING LIGHTS CONFIRMATION
01 DISABLE02 CoNSTaNT03 FLASHING
21 CRANK TIME ADJUSTMENT (TACH)
01 DISaBLe02 +0.2 SECOND TO CRANK03 +0.6 SECOND TO CRANK04 -0.2 SECOND TO CRANK
22 REMOTE STARTER01 DISABLE02 eNaBLe
02 -
DO
OR
LOCK
OPT
ION
01 DOORLOCK ANALOG OUTPUT DURATION
01 0.4 SEC 02 0.8 SeC03 2 SEC04 4 SEC
02 TRUNK ANALOG OUTPUT DURATION
01 0.4 SEC 02 0.8 SeC03 2 SEC04 4 SEC
oPTIoNS SeTTINgS
02 -
DO
OR
LOCK
OPT
ION
03 PRIORITY UNLOCK01 DISaBLe02 ENABLE
04 DOUBLE PULSE LOCK01 DISaBLe02 ENABLE
05 DOUBLE PULSE UNLOCK01 DISaBLe02 ENABLE
06 AUTO RE-LOCK01 DISaBLe02 ENABLE
07 UNLOCK BEFORE START01 DISaBLe02 ENABLE
08 RE-LOCK AFTER START01 DISaBLe02 ENABLE03 SMART RE-LOCK
09 RE-LOCK AFTER RS SHUTDOWN01 DISaBLe02 ENABLE03 SMART RE-LOCK
10 LOCK AFTER MT SHUTDOWN SEQUENCE
01 DISaBLe02 ENABLE03 SMART RE-LOCK
11 LOCK AFTER TURBO MODE01 DISaBLe02 ENABLE
12 IGNITION CONTROLLED DOORLOCK
01 DISaBLe02 ENABLE03 ENABLE 2000 RPM
13 IGNITION CONTROLLED DOORLOCK SETTING
01 LoCK + UNLoCK02 LOCK ONLY03 UNLOCK ONLY
14 TRUNK SEQUENCE01 DISaRM, UNLoCK aND TRUNK02 DISARM AND TRUNK03 TRUNK ONLY
15 ANALOG REARM TRIGGER
01 afTeR STaRT, SHUTDoWN aND fIRST LoCK02 AFTER SHUT DOWN AND FIRST LOCK03 AFTER START ONLY04 AFTER SHUTDOWN ONLY
16 ANALOG DISARM SEQUENCE01 DISaRM oNLY02 DISARM WITH IGN CYCLE
17 DL PARKING LIGHTS CONFIRMATION
01 DISABLE02 eNaBLe03 ENABLE WITH IGNITION ONLY04 ENABLE WITHOUT IGNITION
Default settings are listed in bold.
www.idatalink.comAutomotive Data Solutions Inc. © 2015 iDatastart HC
Page 9 of 17• 20151001
U.S. Patent No. 8,856,780
oNLINe MoDULe SeTTINgS - 3 OF 7
oPTIoNS SeTTINgS
03 -
ALA
RM
/SEC
UR
ITY
OPT
ION
01 ALARM01 DISaBLe02 ENABLE
02 ALARM DURATION01 30 SEC02 60 SeC03 120 SEC
03 ALARM TRIGGERED BEHAVIOR01 No DeLaY02 DELAY WITH PARKING LIGHTS 03 DELAY WITH PARKING LIGHTS AND CHIRPS
04 PASSIVE ALARM/LOCKS
01 ACTIVE ONLY02 ALARM & LOCKS03 aLaRM oNLY04 LOCKS ONLY
05 PASSIVE ALARM/AUTO-RELOCK NOTI
01 DISaBLe02 ALARM & LOCKS03 ALARM ONLY04 LOCKS ONLY
06 PASSIVE ALARM/AUTO-RELOCK TIMING
01 30 SeC02 60 SEC03 5 MIN04 10 MIN
07 PASSIVE OPEN ZONE BYPASS (FORCE
01 DISaBLe02 ENABLE
08 OPEN ZONE NOTIFICATION
01 DISABLE02 eNaBLe03 15 SEC DELAY04 20 SEC DELAY05 25 SEC DELAY06 30 SEC DELAY07 35 SEC DELAY
09 CONFIRMATION CHIRP (HORN OUTPUT)
01 DISABLE02 LOCK ONLY03 DoUBLe LoCK oNLY04 LOCK AND UNLOCK05 UNLOCK ONLY06 LOCK, UNLOCK, START07 DOUBLE LOCK, START
10 CONFIRMATION CHIRP (SIREN OUTPUT)
01 DISABLE02 LOCK ONLY03 DOUBLE LOCK ONLY
oPTIoNS SeTTINgS
03 -
ALA
RM
/SEC
UR
ITY
OPT
ION
10 CONFIRMATION CHIRP (SIREN OUTPUT)
04 LoCK aND UNLoCK05 UNLOCK ONLY06 LOCK, UNLOCK, START07 DOUBLE LOCK, START
11 RESERSED FOR FUTURE USE 01 N/A
12 CHIRP PULSE DURATION (HORN AND
01 20 MS02 30 MS03 40 MS04 45 MS05 50 MS06 60 MS07 100 MS
13 SHOCK SENSOR INPUT BEHAVIOUR
01 DISABLE02 eNaBLe03 WARN AWAY ONLY04 SHOCK ONLY
14 ANALOG SENSOR (-) INPUT BEHAVIOUR
01 DISaBLe02 WARN AWAY ONLY (-)03 SHOCK(-)04 NORMALY CLOSED ALARM(+)05 ZONE 2 PASSIVE 15(-)06 ZONE 2 PASSIVE 30(-)
15 ALARM CONTROL FROM OEM KEYLESS
01 DISABLE02 eNaBLe
16 LED FLASHING01 DISABLE02 eNaBLe (IgNITIoN off oNLY)03 FOLLOW ALARM STATUS
17 ALARM/PANIC WITH PARKING LIGHTS
01 DISABLE02 eNaBLe
18 CAR FINDER DURATION
01 5 SeC02 10 SEC03 15 SEC04 60 SEC
19 STARTER KILL/ANTI-GRIND
01 aNTI-gRIND + aCTIVe SK02 ANTI-GRIND ONLY03 ANTI-GRIND+ PASSIVE SK 30 SECONDS04 ANTI-GRIND+ PASSIVE SK 60 SECONDS
Default settings are listed in bold.
www.idatalink.comAutomotive Data Solutions Inc. © 2015 iDatastart HC
Page 10 of 17• 20151001
U.S. Patent No. 8,856,780
oNLINe MoDULe SeTTINgS - 4 OF 7
oPTIoNS SeTTINgS
04 -
AU
X O
PTIO
N
01 TRANSMITTER AUX 1
01 LEFT SLIDE DOOR02 RIGHT SLIDE DOOR03 PTo 104 PTO 205 PTO 306 PTO 407 CAR FINDER08 GAS CAP09 REAR GLASS10 HEATED SEATS11 COOLED SEATS12 PANIC13 DEFROST
02 TRANSMITTER AUX 2
01 LEFT SLIDE DOOR02 RIGHT SLIDE DOOR03 PTO 104 PTo 205 PTO 306 PTO 407 CAR FINDER08 GAS CAP09 REAR GLASS10 HEATED SEATS11 COOLED SEATS12 PANIC13 DEFROST
03 TRANSMITTER AUX 3
01 LefT SLIDe DooR02 RIGHT SLIDE DOOR03 PTO 104 PTO 205 PTO 306 PTO 407 CAR FINDER08 GAS CAP09 REAR GLASS10 HEATED SEATS11 COOLED SEATS12 PANIC13 DEFROST
04 TRANSMITTER AUX 4 01 LEFT SLIDE DOOR
oPTIoNS SeTTINgS
04 -
AU
X O
PTIO
N
04 TRANSMITTER AUX 4
02 RIgHT SLIDe DooR03 PTO 104 PTO 205 PTO 306 PTO 407 CAR FINDER08 GAS CAP09 REAR GLASS10 HEATED SEATS11 COOLED SEATS12 PANIC13 DEFROST
05 TRANSMITTER AUX 5
01 LEFT SLIDE DOOR02 RIGHT SLIDE DOOR03 PTO 104 PTO 205 PTO 306 PTO 407 CaR fINDeR08 GAS CAP09 REAR GLASS10 HEATED SEATS11 COOLED SEATS12 PANIC13 DEFROST
05 -
AU
X O
PTIO
N
01 POC 1
01 UNLoCK oTHeRS02 DEFROST03 HORN04 IGN05 ACC06 START07 PARKING LIGHTS08 PULSE TIMER OUTPUT 109 PTO110 PTO211 PTO312 PTO413 ARM14 DISARM15 LOCK
Default settings are listed in bold.
www.idatalink.comAutomotive Data Solutions Inc. © 2015 iDatastart HC
Page 11 of 17• 20151001
U.S. Patent No. 8,856,780
oNLINe MoDULe SeTTINgS - 5 OF 7
oPTIoNS SeTTINgS
05 -
PO
C O
PTIO
N
01 POC 1
16 UNLOCK17 TRUNK18 GWR19 LSD20 RSD21 RAP SHUTDOWN22 CAR FINDER
02 POC 2
01 UNLOCK OTHERS02 DefRoST03 HORN04 IGN05 ACC06 START07 PARKING LIGHTS08 N/A09 PTO110 PTO211 PTO312 PTO413 N/A14 ARM15 DISARM16 LOCK17 UNLOCK18 TRUNK19 GWR20 LSD21 RSD22 RAP SHUTDOWN
03 POC 3
01 UNLOCK OTHERS02 DEFROST03 HoRN04 IGN05 ACC06 START07 PARKING LIGHTS08 PULSE TIMER OUTPUT 309 PTO110 PTO2
oPTIoNS SeTTINgS
05 -
PO
C O
PTIO
N
03 POC 3
11 PTO312 PTO413 ARM14 DISARM15 LOCK16 UNLOCK17 TRUNK18 GWR19 LSD20 RSD21 RAP SHUTDOWN22 CAR FINDER
04 POC 4 (LOW CURRENT WHEN ACTIVE)
01 STaRTeR KILL02 DEFROST03 HORN04 IGN05 ACC06 START07 PARKING LIGHTS08 PULSE TIMER OUTPUT 409 PTO110 PTO211 PTO312 PTO413 ARM14 DISARM15 LOCK16 UNLOCK17 TRUNK18 GWR19 LSD20 RSD21 RAP SHUTDOWN22 CAR FINDER
Default settings are listed in bold.
www.idatalink.comAutomotive Data Solutions Inc. © 2015 iDatastart HC
Page 12 of 17• 20151001
U.S. Patent No. 8,856,780
oNLINe MoDULe SeTTINgS - 6 OF 7
oPTIoNS SeTTINgS
06 -
PU
LSE
TIM
ER O
UTP
UT
OPT
ION
01 PTO 1 DURATION
01 1 SeCoND PULSe02 LATCHED 10 SEC03 LATCHED 15 SEC04 LATCHED 20 SEC05 LATCHED 30 SEC06 LATCHED 5 MIN07 LATCHED 10 MIN08 RUN TIME LATCH
02 PTO 2 DURATION
01 1 SeCoND PULSe02 LATCHED 10 SEC03 LATCHED 15 SEC04 LATCHED 20 SEC05 LATCHED 30 SEC06 LATCHED 5 MIN07 LATCHED 10 MIN08 RUN TIME LATCH
03 PTO 3 DURATION
01 1 SeCoND PULSe02 LATCHED 10 SEC03 LATCHED 15 SEC04 LATCHED 20 SEC05 LATCHED 30 SEC06 LATCHED 5 MIN07 LATCHED 10 MIN08 RUN TIME LATCH
04 PTO 4 DURATION
01 1 SeCoND PULSe02 LATCHED 10 SEC03 LATCHED 15 SEC04 LATCHED 20 SEC05 LATCHED 30 SEC06 LATCHED5 MIN07 LATCHED 10 MIN08 RUN TIME LATCH
oPTIoNS SeTTINgS
07 -
INPU
T SO
UR
CE
01 BRAKE01 ANALOG02 DATA03 aUTo
02 DOOR01 ANALOG02 DATA03 aUTo
03 TACH01 ANALOG02 DATA03 aUTo
04 HOOD
01 ANALOG02 DATA03 aUTo04 ANALOG INVERTED
05 TRUNK01 ANALOG02 DATA03 aUTo
06 GLOW PLUG01 ANALOG02 DATA03 aUTo
07 E-BRAKE01 ANALOG02 DATA03 aUTo
08 TEMPERATURE01 ANALOG (TEMP SENSOR)02 DATA (FROM CAR)03 aUTo
09 VSS01 DISABLE02 aUTo
Default settings are listed in bold.
www.idatalink.comAutomotive Data Solutions Inc. © 2015 iDatastart HC
Page 13 of 17• 20151001
U.S. Patent No. 8,856,780
oNLINe MoDULe SeTTINgS - 7 OF 7
Default settings are listed in bold.
oPTIoNS SeTTINgS
08 -
OU
TPU
T SO
UR
CE
01 ARM 01 ANALOG02 aNaLog/DaTa
02 DISARM01 ANALOG02 aNaLog/DaTa
03 LOCK01 ANALOG02 aNaLog/DaTa
04 UNLOCK ALL 01 ANALOG02 aNaLog/DaTa
05 UNLOCK DRIVER DOOR01 ANALOG02 aNaLog/DaTa
06 TRUNK01 ANALOG02 aNaLog/DaTa
07 LEFT SLIDING DOOR01 ANALOG02 aNaLog/DaTa
08 RIGHT SLIDING DOOR01 ANALOG02 aNaLog/DaTa
09 PARKING LIGHTS01 ANALOG02 aNaLog/DaTa
10 RAP SHUT DOWN01 ANALOG02 aNaLog/DaTa
11 PANIC01 ANALOG02 aNaLog/DaTa
12 CAR FINDER01 ANALOG02 aNaLog/DaTa
13 DEFROST01 ANALOG02 aNaLog/DaTa
14 HORN 01 ANALOG02 aNaLog/DaTa
15 SLEEP STATUS ON LED01 DISaBLe02 ENABLE
www.idatalink.comAutomotive Data Solutions Inc. © 2015 iDatastart HC
Page 14 of 17• 20151001
U.S. Patent No. 8,856,780
ReMoTe STaRTeR eRRoR CoDeS - 1 OF 1
ReMoTe STaRTeR eRRoR CoDeS:NoTeS
[X] N
UM
BeR
of
PaR
KIN
g LI
gHT
fLaS
HeS
DIa
gNo
STIC
I WARNING: The following applies only when the parking lights are connected and supported by the system.
01 Engine running. 02 Key in ignition at ON position.
II After a remote starter failure, the parking lights will fl ash three [3x] times, then will fl ash [X] number times to indicate an error code. See table.
03 Door is open.04 Trunk is open.05 Foot brake is ON. 06 Hood is open.07 The reservation is OFF. (Manual transmission only)08 Tach failure.09 The vehicle is moving (VSS).10 System is in Valet Mode. 11 CAN communication failure12 RS not synchronized. Start vehicle with OEM key for 15 sec before trying a new RS sequence.13 Bypass problem.
ReMoTe STaRTeR SHUTDoWN eRRoR CoDeS:NoTeS
[Y] N
UM
BeR
of
PaR
KIN
g LI
gHT
fLaS
HeS
DIa
gNo
STIC
I WARNING: The following applies only when the parking lights are connected and supported by the system.
01 Engine tach signal is lost.02 Emergency brake is lost.
II If the engine shuts down after a remote starter sequence: Press and hold the Trunk button and the Start button at the same time for 2.5 seconds when using a 1-WAY remote. OR Press once [1x] on button “4” when using a 2-WAY remote.
The parking lights will fl ash four [4x] times, then will fl ash [Y] number times to indicate an error code. See table.
03 Foot brake is ON. 04 Hood is open.05 Engine RPM limiter is ON.06 Glow plug timeout error.07 Vehicle is moving (VSS).08 N/A09 N/A10 Door is open.11 CAN communication failure during RS sequence.12 RS not synchronized. Start vehicle with OEM key for 15 sec before trying a new RS sequence.13 Takeover is not allowed.14 Shutdown error, board overheat protection.
www.idatalink.comAutomotive Data Solutions Inc. © 2015 iDatastart HC
Page 15 of 17• 20151001
U.S. Patent No. 8,856,780
MoDULe DIagNoSTICS - 1 OF 1
TeST MoDULe
LeD
1 S
TaTU
S
DIa
gNo
STIC
I DURING PROGRAMMING
Flashing RED Missing/wrong information from fi rmware or vehicle.Solid RED Module waiting for more vehicle information.Flashing GREEN Additional steps required to complete module programming.Solid GREEN then OFF Module correctly programmed.OFF No activity or module already programmed.
II DURING REMOTE START
Flashing RED Module incorrectly programmed.Solid RED Module incorrectly programmed.Flashing GREEN Module correctly programmed and operational.Solid GREEN then OFF Reset in progress.OFF Invalid ground when running status from remote starter.
III WITH IGNITION OFF
Flashing RED Module incorrectly programmed or connected.Solid RED Module not programmed. Waiting for more vehicle information.Flashing GREEN False ground when running status from remote starter.Solid GREEN then OFF Reset in progress.OFF Module at rest and ready for a remote start sequence.
www.idatalink.comAutomotive Data Solutions Inc. © 2015 iDatastart HC
Page 16 of 17• 20151001
U.S. Patent No. 8,856,780
>>
01
02
03
04
05
06
07
08
>>
MODULE RESET PROCEDURE - 1 OF 1
The following procedure resets the module programming to the vehicle. It does not reset any settings confi gured online.
Disconnect all connectors from module except the BLACK 20-PIN connector.
Disconnect the BLACK 20-PIN connector.
PRESS AND HOLD the module’s programming button while connecting the BLACK 20-PIN connector.
Wait, LED 1 will flash RED. RELEASE programming button.
LED 1 will turn RED for 2 seconds.
Module RESET completed.
Reconnect all connectors.
Repeat programming procedure.
Failure to follow procedure may result with a DTC or a CHECK ENGINE error message.
www.idatalink.comAutomotive Data Solutions Inc. © 2015 iDatastart HC
Page 17 of 17• 20151001
Revision Date20151001
Document numbeR
notice The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work.
U.S. Patent No. 8,856,780
install guiDe2000-2006 Mazda MPV STd key aT
haRDwaReadS-HCX
accessoRies adS-USB (OPTIONaL)adS-WLM-aN1/adS-WLM-aP1 (OPTIONaL)dRONe MOBILe dR-2000 (OPTIONaL)COMPaTIBLe RF-kIT (OPTIONaL)
fiRmwaReadS-HCX(RST)-Ma-[adS-HCX]
www.idatalink.comAutomotive Data Solutions Inc. © 2015
U.S. Patent No. 8,856,780
02A_v1_[W]
HARDWIRE / COMPONENT LOCATOR - 1 OF 1
A
BC
D
E
F
www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-MA-[ADS-HCX]-EN
Page 2 of 7• 20151001
U.S. Patent No. 8,856,780
M3
M1
M2 M5M4
1
1
1321104115129876
02A_v1_[W]
1
13
2
14
3
15
4
16
5
17
6
18
7
19
8
20
9
21
10
22
11
23
12
24
12
910
3
11
4
12
5
13
6
14
8
16
7
15
HARDWIRE / WIRING DIAGRAM - 1 OF 1
1
1
1
M5
M4
M1
M2
M3
04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT
03 BROWN/RED03 BROWN/RED04 BROWN/YELLOW04 BROWN/YELLOW
PARKING LIGHT (-) BROWN/WHITE - 13
12V (+) WHITE/BLACK
ACCESSORY (+) BLACK/RED
ARM/DISARM (MUX) LTGREEN - 14
BRAKE (+) GREEN/YELLOW
TACH (AC) PURPLE/WHITE
IGNITION SWITCH (A)
IMMOBILIZER, NEAR STEERING COLUMN (B)
DOORLOCK MODULE (C)
BRAKE SWITCH (D)
HEADLAMP SWITCH (D)
DIAGNOSTIC CONNECTOR (F)
IMMO. (DATA) BLUE/WHITEOR BLUE/BLACK - 05
STARTER (+) BLUE/YELLOW
IGNITION (+) BLUE
04 PINK/WHITE
01 ORANGE - ACCESSORY (+)01 ORANGE - ACCESSORY (+)02 RED - 12V (+)02 RED - 12V (+)03 PURPLE - STARTER (+)03 PURPLE - STARTER (+)
05 PINK - IGNITION (+)05 PINK - IGNITION (+)
07 RED - 12V (+)07 RED - 12V (+)08 BLACK - GROUND08 BLACK - GROUND
06 WHITE06 WHITE
06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT
08 WHITE/PURPLE•BLACK DOT
01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT03 RED/WHITE•BLACK DOT
05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT
07 EMPTY07 EMPTY
09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT
11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT - PARKING LIGHT (-) OUTPUT12 WHITE•BLACK DOT - PARKING LIGHT (-) OUTPUT
01 BROWN•SILVER DOT - BRAKE (+) INPUT01 BROWN•SILVER DOT - BRAKE (+) INPUT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT
08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY
01 EMPTY01 EMPTY02 EMPTY02 EMPTY
05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED - IMMOBILIZER (DATA) VEHICLE SIDE11 GRAY/RED - IMMOBILIZER (DATA) VEHICLE SIDE12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED13 GREEN/RED14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK16 ORANGE/BLACK17 PINK17 PINK18 PURPLE18 PURPLE19 RED19 RED20 BLACK20 BLACK
01 GRAY/BLACK•BLUE DOT - IGNITION (+) CONNECTOR SIDE01 GRAY/BLACK•BLUE DOT - IGNITION (+) CONNECTOR SIDE02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE03 GRAY/RED•BLUE DOT - IGNITION (+) VEHICLE SIDE03 GRAY/RED•BLUE DOT - IGNITION (+) VEHICLE SIDE04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE05 GRAY•BLUE DOT05 GRAY•BLUE DOT06 WHITE•BLUE DOT 06 WHITE•BLUE DOT
07 GRAY•SILVER DOT - HOOD (-) INPUT 07 GRAY•SILVER DOT - HOOD (-) INPUT
10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT
HORN (-)
HOOD SWITCH
INSTALL THE SUPPLIED HOOD SWITCH IFTHE VEHICLE IS NOT EQUIPPED WITH ONE.
IGNITION (+) BLACK/WHITE - 07
1K
www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-MA-[ADS-HCX]-EN
Page 3 of 7• 20151001
U.S. Patent No. 8,856,780
01OFF
ACC ONSTART
02OFF
ACC ONSTART
03
04OFF
ACC ONSTART
05OFF
ACC ONSTART
06
07
08
09
10
MODULE PROGRAMMING PROCEDURE - 1 OF 1
Insert key into ignition.
Turn key to START position.
Wait, LED 1 will turn solid GREEN for 2 seconds.
Turn key to OFF position.
START vehicle for 15 seconds.
Press and hold the brake pedal.
Press and release the module’s programming button.
Release the brake pedal.
Wait, LED 2 will fl ash GREEN.
Module Programming Procedure completed.
www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-MA-[ADS-HCX]-EN
Page 4 of 7• 20151001
U.S. Patent No. 8,856,780
>>
01
02OFF
ACC ONSTART
03OFF
ACC ONSTART
04
05
>>
TAKEOVER PROCEDURE - STD KEY - 1 OF 1
All vehicle doors must be closed and locked prior to remote start sequence.
Press unlock on OEM or aftermarket remote.
Insert key into ignition.
Turn key to ON position.
Press and release BRAKE pedal.
Take over procedure completed.
Failure to follow procedure will result in vehicle engine shutdown.
www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-MA-[ADS-HCX]-EN
Page 5 of 7• 20151001
U.S. Patent No. 8,856,780
INSTaLLaTIoN CHeCKLIST - 1 OF 2
1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.
2 Close all vehicle doors, hood and trunk.
3 Press the LOCK button once [1x] on the aftermarket keyfob.
¨
Question 1: Do the doors lock?
YES: Go to next step.
¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.
4 Press the UNLOCK button once [1x] on the aftermarket keyfob.
¨
Question 2: Do the doors unlock?
YES: Go to next step.
¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.
5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.
¨
Question 3: Does the trunk or hatch open/unlock?
YES: Close trunk or hatch and go to next step.
¨NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.
6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.
¨
Question 4: Does the driver side sliding door open?
YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.
¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.
7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.
¨
Question 5: Does the passenger side sliding door open?
YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.
¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.
8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.
¨
Question 6: Does the vehicle remote start?
YES: Go to next step.
¨NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.
9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.
¨
Question 7: Does the vehicle shut down?
YES: Go to next step.
¨NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.
10 RAP and auto light shutdown test
¨
Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?
YES: Go to next step.
¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.
11 Open hood.
12 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.
13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.
¨
Question 9: Does the vehicle remote start?
YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.
¨ NO: Go to next step.
14 Close hood.
15 Enter vehicle and close the doors.
16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.17 Wait for the vehicle to start.
18 Press brake pedal.
¨
Question 10: Does the vehicle shut down?
YES: Go to next step.
¨NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.
19 Exit vehicle.
20 Installation checklist completed.
CHeCKLIST - WITH afTeRMaRKeT KeYfoB
www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-MA-[ADS-HCX]-EN
Page 6 of 7• 20151001
U.S. Patent No. 8,856,780
INSTaLLaTIoN CHeCKLIST - 2 OF 2
CHeCKLIST - WITH oeM KeYfoB
1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.
2 Close all vehicle doors, hood and trunk.
3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.
¨
Question 1: Does the vehicle remote start?
YES: Go to next step.
¨ NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.
4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.
¨
Question 2: Does the vehicle shut down?
YES: Go to next step.
¨ NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.
5 RAP Shutdown test
¨
Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?
YES: Go to next step.
¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.
6 Open hood.
7 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.
8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.
¨
Question 4: Does the vehicle remote start?
YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.
¨ NO: Go to next step.
9 Close hood.
10 Enter vehicle and close the doors.
11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.
12 Wait for the vehicle to start.
13 Press brake pedal.
¨¨
Question 5: Does the vehicle shut down?
YES: Go to next step.
NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.
14 Exit vehicle.
15 Installation checklist completed.
www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-MA-[ADS-HCX]-EN
Page 7 of 7• 20151001
Revision Date20151001
Document numbeR
notice The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work.
U.S. Patent No. 8,856,780
install guiDe2001-2004 Mazda Miata Std key at
haRDwaReadS-HCX
accessoRies adS-USB (OPtiONaL)adS-WLM-aN1/adS-WLM-aP1 (OPtiONaL)dRONe MOBiLe dR-2000 (OPtiONaL)COMPatiBLe RF-kit (OPtiONaL)
fiRmwaReadS-HCX(RSt)-Ma-[adS-HCX]
www.idatalink.comAutomotive Data Solutions Inc. © 2015
U.S. Patent No. 8,856,780
01A_v1_[W]
HARDWIRE / COMPONENT LOCATOR - 1 OF 1
AB
D
C
E
www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-MA-[ADS-HCX]-EN
Page 2 of 7• 20151001
U.S. Patent No. 8,856,780
M3
M1
M2 M5M4
1
1
1321104115129876
01A_v1_[W]
1
6
2
789
3
10
4
11
5
12
HARDWIRE / WIRING DIAGRAM - 1 OF 1
1
1
M5
M4
M1
M2
M3
04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT
03 BROWN/RED03 BROWN/RED04 BROWN/YELLOW04 BROWN/YELLOW
12V (+) WHITE/RED
ACCESSORY (+) BLACK/RED
ARM/DISARM (MUX) RED/BLUE - 09
TACH (AC) GREEN/TAN
PARKING LIGHT (+) RED/BLACK
TRUNK RELEASE (-) RED/WHITE
BRAKE (+) GREEN
IGNITION SWITCH (A)
IMMOBILIZER, NEAR STEERING COLUMN (B)
DOORLOCK MODULE (C)
DRIVER KICK PANEL (D)
DIAGNOSTIC CONNECTOR (E)
IMMO. (DATA) RED/BLACK - 05
STARTER (+) WHITE/BLACK
IGNITION (+) BLUE
04 PINK/WHITE
01 ORANGE - ACCESSORY (+)01 ORANGE - ACCESSORY (+)02 RED - 12V (+)02 RED - 12V (+)03 PURPLE - STARTER (+)03 PURPLE - STARTER (+)
05 PINK - IGNITION (+)05 PINK - IGNITION (+)
07 RED - 12V (+)07 RED - 12V (+)08 BLACK - GROUND08 BLACK - GROUND
06 WHITE - PARKING LIGHT (+)06 WHITE - PARKING LIGHT (+)
06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT
08 WHITE/PURPLE•BLACK DOT
01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT
05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT
07 EMPTY07 EMPTY
09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT
11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT12 WHITE•BLACK DOT
01 BROWN•SILVER DOT - BRAKE (+) INPUT01 BROWN•SILVER DOT - BRAKE (+) INPUT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT05 PURPLE/WHITE•SILVER DOT - TACH (AC) INPUT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT
08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY
01 EMPTY01 EMPTY02 EMPTY02 EMPTY
05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED - IMMOBILIZER (DATA) VEHICLE SIDE11 GRAY/RED - IMMOBILIZER (DATA) VEHICLE SIDE12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED13 GREEN/RED14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK16 ORANGE/BLACK17 PINK17 PINK18 PURPLE18 PURPLE19 RED19 RED20 BLACK20 BLACK
01 GRAY/BLACK•BLUE DOT - IGNITION (+) CONNECTOR SIDE01 GRAY/BLACK•BLUE DOT - IGNITION (+) CONNECTOR SIDE02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE02 WHITE/BLACK•BLUE DOT - IMMO. (DATA) CONNECTOR SIDE03 GRAY/RED•BLUE DOT - IGNITION (+) VEHICLE SIDE03 GRAY/RED•BLUE DOT - IGNITION (+) VEHICLE SIDE04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE04 WHITE/RED•BLUE DOT - IMMO. (DATA) VEHICLE SIDE05 GRAY•BLUE DOT05 GRAY•BLUE DOT06 WHITE•BLUE DOT 06 WHITE•BLUE DOT
07 GRAY•SILVER DOT - HOOD (-) INPUT 07 GRAY•SILVER DOT - HOOD (-) INPUT
10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT
HORN (-)
HOOD SWITCH
INSTALL THE SUPPLIED HOOD SWITCH IFTHE VEHICLE IS NOT EQUIPPED WITH ONE.
IGNITION (+) BLACK/WHITE - 07
1K
www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-MA-[ADS-HCX]-EN
Page 3 of 7• 20151001
U.S. Patent No. 8,856,780
01OFF
ACC ONSTART
02OFF
ACC ONSTART
03
04OFF
ACC ONSTART
05OFF
ACC ONSTART
06
07
08
09
10
MODULE PROGRAMMING PROCEDURE - 1 OF 1
Insert key into ignition.
Turn key to START position.
Wait, LED 1 will turn solid GREEN for 2 seconds.
Turn key to OFF position.
START vehicle for 15 seconds.
Press and hold the brake pedal.
Press and release the module’s programming button.
Release the brake pedal.
Wait, LED 2 will fl ash GREEN.
Module Programming Procedure completed.
www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-MA-[ADS-HCX]-EN
Page 4 of 7• 20151001
U.S. Patent No. 8,856,780
>>
01
02OFF
ACC ONSTART
03OFF
ACC ONSTART
04
05
>>
TAKEOVER PROCEDURE - STD KEY - 1 OF 1
All vehicle doors must be closed and locked prior to remote start sequence.
Press unlock on OEM or aftermarket remote.
Insert key into ignition.
Turn key to ON position.
Press and release BRAKE pedal.
Take over procedure completed.
Failure to follow procedure will result in vehicle engine shutdown.
www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-MA-[ADS-HCX]-EN
Page 5 of 7• 20151001
U.S. Patent No. 8,856,780
INSTaLLaTIoN CHeCKLIST - 1 OF 2
1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.
2 Close all vehicle doors, hood and trunk.
3 Press the LOCK button once [1x] on the aftermarket keyfob.
¨
Question 1: Do the doors lock?
YES: Go to next step.
¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.
4 Press the UNLOCK button once [1x] on the aftermarket keyfob.
¨
Question 2: Do the doors unlock?
YES: Go to next step.
¨NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.
5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.
¨
Question 3: Does the trunk or hatch open/unlock?
YES: Close trunk or hatch and go to next step.
¨NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.
6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.
¨
Question 4: Does the driver side sliding door open?
YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.
¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.
7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.
¨
Question 5: Does the passenger side sliding door open?
YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.
¨NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.
8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.
¨
Question 6: Does the vehicle remote start?
YES: Go to next step.
¨NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.
9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.
¨
Question 7: Does the vehicle shut down?
YES: Go to next step.
¨NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.
10 RAP and auto light shutdown test
¨
Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?
YES: Go to next step.
¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.
11 Open hood.
12 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.
13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.
¨
Question 9: Does the vehicle remote start?
YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.
¨ NO: Go to next step.
14 Close hood.
15 Enter vehicle and close the doors.
16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.17 Wait for the vehicle to start.
18 Press brake pedal.
¨
Question 10: Does the vehicle shut down?
YES: Go to next step.
¨NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.
19 Exit vehicle.
20 Installation checklist completed.
CHeCKLIST - WITH afTeRMaRKeT KeYfoB
www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-MA-[ADS-HCX]-EN
Page 6 of 7• 20151001
U.S. Patent No. 8,856,780
INSTaLLaTIoN CHeCKLIST - 2 OF 2
CHeCKLIST - WITH oeM KeYfoB
1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.
2 Close all vehicle doors, hood and trunk.
3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.
¨
Question 1: Does the vehicle remote start?
YES: Go to next step.
¨ NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.
4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.
¨
Question 2: Does the vehicle shut down?
YES: Go to next step.
¨ NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.
5 RAP Shutdown test
¨
Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?
YES: Go to next step.
¨ NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.
6 Open hood.
7 If not already installed, affi x the mandatory orange warning sticker under the hood and proceed to next step.
8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.
¨
Question 4: Does the vehicle remote start?
YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.
¨ NO: Go to next step.
9 Close hood.
10 Enter vehicle and close the doors.
11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.
12 Wait for the vehicle to start.
13 Press brake pedal.
¨¨
Question 5: Does the vehicle shut down?
YES: Go to next step.
NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.
14 Exit vehicle.
15 Installation checklist completed.
www.idatalink.comAutomotive Data Solutions Inc. © 2015 ADS-HCX(RST)-MA-[ADS-HCX]-EN
Page 7 of 7• 20151001