product guide - cm buck &...

HIGH QUALITY, ENERGY EFFICIENT FIXTURES WITH WATERTIGHT SEALS

AND NSF CERTIFICATIONS

PRODUCT GUIDELusio® Washdown Series v 1.1

The Lusio® Washdown Series features LED high bay ! xtures for use in demanding

environments that require watertight seals including food/beverage processing,

cold storage, warehouses, garden centers, and industrial facilities. Engineered

with the latest in energy e" cient LED technology, each model includes an

injection molded ! berglass body with a sturdy lens to withstand hosedown

cleanings and environments where extreme dust and moisture are factors.

WWW.FLEXTRONICS.COM/LIGHTING • LIGHTING!FLEXTRONICS.COM • 913"851"3000 1

ZZZ�À�H[WURQLFV�FRP�OLJKWLQJ

LUSIO®�:$6+'2:1�6(5,(6�v��352'8&7�*8,'(

Introduction • LED Lighting for Demanding Environments..........................................................................................................................2-3

1-to-1 Comparisons to Traditional Light Sources .............................................................................................................................................4-5

4 LED Modules (4M) Fixture ......................................................................................................................................................................................6-9

6 LED Modules (6M) Fixture .................................................................................................................................................................................10-13

8 LED Modules (8M) Fixture .................................................................................................................................................................................14-17

Installation and Wiring ..........................................................................................................................................................................................18-20

NSF Food Zone Classi# cations .................................................................................................................................................................................. 21

Safety Guidelines ........................................................................................................................................................................................................... 22

Chemical Resistance Chart...................................................................................................................................................................................23-27

LED Lighting for Demanding Environments

• Three low-pro# le high bays for use in environments where hosedown cleaning is required or where extreme dust and moisture are present

• Single-piece # berglass housings with fully gasketed external acrylic lens seals # xtures in harsh environments

• Ideal for food/beverage processing applications, cold storage, warehouses, garden centers, and industrial applications

• Extremely high e$ cacies

• Reported 93% lumen maintenance (L93) at 60,000 hours

• Little to no maintenance required during # xture lifetimes

L U S I O ® W A S H D O W N S E R I E S

High quality, energy e! cient " xtures with watertight seals and NSF certi" cations

Highly Durable and VersatileFor use in interior or exterior locations, Lusio Washdown # xtures are suitable for exposure to ultraviolet light and

water, including high-pressure hoses.

Easy Installation Fixtures are installed by

suspension, pendant, or surface mount without drilling through

the housing. A tool-less entry and an attached gear tray allow for easy wiring from

underneath the # xture.Certi" cations & Listings

ETL (US and Canada), NSF, IP 66, RoHS Compliant, FCC Class A, Lighting Facts,

DesignLights Consortium.

Voltage OptionsLusio Washdown # xtures

support 120-277v and 347-480v inputs.

2

lighting@! extronics.com • www.! extronics.com/lighting • (913) 851-3000lighting@! extronics.com • www.! extronics.com/lighting • (913) 851-3000

/XVLR�:DVKGRZQ�¿�[WXUHV�ZLWK�IRXU��VL[��DQG�HLJKW�/('�PRGXOHV�IHDWXUH�ZDWHUWLJKW�KRXVLQJV�DQG�LQFUHDVHG�OXPHQ�RXWSXWV�WR�PHHW�YDULRXV�IRRWFDQGOH�UHTXLUHPHQWV�DQG�PRXQWLQJ�KHLJKWV��7KH�¿�[WXUHV�DUH�DYDLODEOH�LQ�WZR�/('�FRORU�WHPSHUDWXUHV��.�RU��.��&OHDU�OHQVHV�GHOLYHU�PD[LPXP�OLJKW�RXWSXW��)URVWHG�OHQVHV�SURYLGH�HQKDQFHG�JODUH�FRQWURO�DQG�OLJKW�GLVWULEXWLRQ�RSWLRQV��

4M, 6M, and 8M Models

LED Lighting for Demanding Environments

Controllable Lusio Washdown # xtures can include an optional factory installed dimmable

power supply that interfaces to standard third party 0-10v dimmers.

Lens OptionsClear and frosted acrylic lenses are available.

3

WWW.FLEXTRONICS.COM/LIGHTING • LIGHTING!FLEXTRONICS.COM • 913"851"3000

LUSIO® WASHDOWN SERIES V 1.1 PRODUCT GUIDE

4

1-to-1 Comparisons to Traditional Light Sources

# OF LAMPS

INITIAL LAMP

LUMENS

TOTAL FIXTURE

WATTAGE AVEUNIFORMITY %MAX/MIN&

LIGHTING POWER DENSITY %W/SQ FT&

LAMPLUMENS

TOTAL FIXTURE



Comparable Washdown v1.1 Model

175w MH 1 14,008 210 17.08 1.67 1.008 4 Module: WD1-UL-4M-50-CLAC 11,400 120 21.77 1.67 0.432



# OF LAMPS

INITIAL LAMP

LUMENS

TOTAL FIXTURE



LAMPLUMENS

TOTAL FIXTURE




54w T5HO 2 8,800 103 20.91 1.92 0.864 4 Module: WD1-UL-4M-50-CLAC 11,400 120 21.77 1.67 0.432

54wT5HO 4 19,600 226 26.47 1.58 0.814 6 Module: WD1-UL-6M-50-CLAC 16,900 180 32.16 1.73 0.648

54w T5HO 6 29,400 329 39.60 1.61 1.184 8 Module: WD1-UL-8M-50-CLAC 22,300 242 42.58 1.63 0.871

# OF LAMPS

INITIAL LAMP

LUMENS

TOTAL FIXTURE



LAMPLUMENS

TOTAL FIXTURE




32w T8 3 8,850 78 18.24 1.83 0.468 4 Module: WD1-UL-4M-50-CLAC 11,400 120 21.77 1.67 0.432

32wT8 4 11,800 111 18.74 1.69 0.533 4 Module: WD1-UL-4M-50-CLAC 11,400 120 21.77 1.67 0.432

32w T8 6 17,700 167 20.92 1.69 0.601 4 Module: WD1-UL-4M-50-CLAC 11,400 120 21.77 1.67 0.432

ASSUMPTIONSThese calcs were run in a general space of 50x50 ft (2,500 sq ft) with the following criteria held constant:Re' ectances = 65/50/20 Ceiling Height = 25 ft Fixture Mounting Height = 25 ft Calc Plane Height = Floor Fixture Spacing = Varies depending on space

vs. Metal Halide Lamps

vs. Fluorescent High Bay - T5HO

vs. Fluorescent High Bay - Standard T8

NOTESIndustry standard light loss factors used as follows: Metal Halide: 0.65 All Fluorescent: 0.8



5

NOTES* This lamp is not truly 1-for-1 retro# t. More # xtures were used in space to model realistic application conditions. Comparison made reduces number of # xtures in space to meet baseline light levels.** Industry standard light loss factors used as follows: Metal Halide: 0.65 All Fluorescent: 0.8

# OF LAMPS

INITIAL LAMP

LUMENS

TOTAL FIXTURE



LAMPLUMENS

TOTAL FIXTURE




T8HO - 44w* 2 8,000 73 23.86 1.93 0.584 6 Module: WD1-UL-6M-50-CLAC 16,900 180 32.16 1.73 0.648

4 Module: WD1-UL-4M-50-CLAC 11,400 120 21.77 1.67 0.432

# OF LAMPS

INITIAL LAMP

LUMENS

TOTAL FIXTURE



LAMPLUMENS

TOTAL FIXTURE




T12 - 48W* 2 6,100 93 24.42 2.07 1.339 6 Module: WD1-UL-6M-50-CLAC 16,900 180 32.16 1.73 0.648

T12HO* 1 4,100 81 16.83 2.10 1.166 4 Module: WD1-UL-4M-50-CLAC 11,400 120 21.77 1.67 0.432

T12HO* 2 8,200 127 24.33 2.00 1.270 6 Module: WD1-UL-6M-50-CLAC 16,900 180 32.16 1.73 0.648

ASSUMPTIONSThese calcs were run in a general space of 50x50 ft (2,500 sq ft) with the following criteria held constant:Re' ectances = 65/50/20 Ceiling Height = 25 ft Fixture Mounting Height = 25 ft Calc Plane Height = Floor Fixture Spacing = Varies depending on space

vs. Fluorescent High Bay - T8HO

vs. Fluorescent High Bay - T12/T12HO

NOTES

1-to-1 Comparisons to Traditional Light Sources

6

SPECIFICATION SHEETVERSION 1.1

www.# extronics.com/lighting • lighting@# extronics.com • +1-913-851-3000 Flextronics is a leading end-to-end supply chain solutions company that delivers design, engineering, manufacturing and logistics services to a range of industries and end-markets, including data networking, telecom, enterprise computing and storage, industrial, capital equipment, appliances, automation, medical, automotive, aerospace and defense, energy, mobile, computing and other electronic product categories. Flextronics is an industry leader that helps its customers design, build, ship, and service their products through an unparalleled network of facilities in more than 30 countries and across four continents. Flextronics Lighting Solutions is a business unit within the Flextronics Energy division. Copyright © 2014, Flextronics. 090814-1.

Lusio® Washdown Series4 LED MODULES (4M)

FEATURES & SPECIFICATIONS POWER AND CONTROL

• POWER INPUT: 120-480V (50/60Hz). • DIMMING: Factory installed dimmable power supply (10-100%

dimming) that interfaces to standard third party 0-10V dimmers.

LUMEN MAINTENANCE

• L93 LIFE: Reported 93% lumen maintenance (L93) at 60,000 hours

FIXTURE

• ENVIRONMENT: Wet, high pressure washdown, interior or exterior applications.

• HOUSING:- UL 5VA fiberglass housing (will not melt or burn).- Weatherability (f1) rated. Suitable for outdoor use with respect

to exposure to ultraviolet light, water exposure and immersion in accordance with UL 746.

• LENSES: Lenses are high efficiency, UV stabilized acrylic.• MOUNTING OPTIONS: Mounting clips are cable-ready. Optional

mounting bracket kit sold separately.• WARRANTY: Limited 5-year warranty. • AMBIENT OPERATING TEMPERATURES:

Surface -4° to 104°F (-20° to 40°C)Suspension -4° to 104°F (-20° to 40°C)

LISTINGS AND CERTIFICATIONS

• ETL• NSF (non-food zone and splash zone) • NEMA 4X • IP66 • RoHS compliant• FCC Class A• Lighting Facts (U.S. Department of Energy) certi# ed• DesignLights™ Consortium

INS %CMS& • LBS %KGS&

FIXTURE PERFORMANCE

WATTAGE1 LUMENS1 EFFICACY1 CRI2

CLEAR, ACRYLIC LENS %CLAC&4000K1 120 11,300 94.2 705000K1 120 11,400 95.0 70

FROSTED, ACRYLIC LENS %FRAC&4000K1 120 11,100 92.5 705000K1 120 11,200 93.3 70

1 Typical at 120V and 77°F (25°C). 2 Typical CRI.

DIMENSIONS

LENGTH WIDTH DEPTH WEIGHT52"3/8 %133& 14"5/8 %37.1& 6 %15.2& 20"1/2 %9.3&

1 Dimensions listed are for the # xture only. See dimensional drawings for measurements with mounting hardware.

POWER FACTOR

120V 0.996277V 0.945347V 0.976480V 0.940

TOTAL HARMONIC DISTORTION

120V 6.5%277V 12.9%347V 18.0%480V 18.9%

ABOUT THE SERIESThe Lusio Washdown Series features LED high bay fixtures for use in demanding environments that require watertight seals including food/beverage processing, cold storage, warehouses, garden centers, and industrial facilities. Engineered with the latest energy efficient LED technology, each model includes an injection molded fiberglass body with a sturdy lens to withstand environments where extreme dust and moisture are factors.

INTENDED USEWet, High Pressure Washdown, Interior or Exterior Applications

Target Mounting Heights Replaces Traditional Light Sources

10-40 Feet (3-12m) 175W Metal Halide. 2-Lamp T5HO. 3-, 4-, and 6-Lamp T8. 1-Lamp T12HO.

Standard model shown with optional cable kit (sold separately)

7




ORDERING EXAMPLE:

WD1"UL"4M"40"CLAC"CRM"120"10V"CORDN

ACCESSORIES: Must be ordered separately. Packaged separately.

Type Part Number Description

CABLE KIT CABLEKIT Kit includes 10 ft Gripple aircraft cable and “Y” snap hook - one pair (not NSF certi# ed)

CABLE KIT SAFETYCABLE Kit includes 5 ft Gripple aircraft cable with single snap hook (not NSF certi# ed)

1 Optional add-on. See price list for pricing.

COLOR TEMP

404000K

505000K

LENS

CLACClear Acrylic

FRACFrosted Acrylic

MOUNTING

CRMStainless steel

mouting clips are cable-ready for pendant

mounting.

MBR1

Kit includes rigidmounting bracket for

surface or dual pendantmounting.

WD1"UL"4M

SERIES

10V

DIMMING

10V0-10V Interface

CORD

CORDNNo cord. No plug.

C6W1

6ft cord. No plug.

C15W1

15ft cord. No plug.

VOLTAGE

120120V

277277V

208208V

347347V

220220V

480480V

240240V



8

DIMENSIONS: INS $CMS%

52"3/8 %133&

CABLE READY MOUNT $CRM%

WITH OPTIONAL MBR FOR SURFACE OR DUAL PENDANT MOUNT

14"5/8 %37.1&

6 %15.2&

BOTTOM VIEW

SIDE VIEW

TOP VIEW

END VIEW

4 LED MODULES (4M)



9

COEFFICIENTS OF UTILIZATION

RC 80 70 50 30 10 0RW 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0

0 118 118 118 118 114 114 114 114 108 108 108 102 102 102 97 97 97 951 107 102 98 94 104 100 96 92 94 91 88 89 87 84 85 83 81 792 98 89 82 77 94 87 81 75 82 77 73 78 74 70 75 71 68 653 89 78 70 64 86 76 69 63 73 66 61 69 64 59 66 62 58 554 82 70 61 54 79 68 60 54 65 58 52 62 56 51 59 54 50 475 75 62 53 47 73 61 52 46 58 51 45 56 49 44 53 48 43 416 69 56 47 41 67 55 47 40 53 45 40 50 44 39 48 43 38 367 64 51 42 36 62 50 42 36 48 41 35 46 39 35 44 38 34 328 60 46 38 32 58 46 38 32 44 37 31 42 36 31 41 35 30 299 56 43 35 29 54 42 34 29 40 33 28 39 33 28 38 32 28 26

10 52 39 32 26 51 39 31 26 37 31 26 36 30 25 35 29 25 23RCR=Room Cavity Ratio RC=E(ective Ceiling Cavity Re'ectance RW=Wall Re'ectance

E(ective Floor Cavity Re'ectance = 20%


RC 80 70 50 30 10 0RW 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0

0 118 118 118 118 115 115 115 115 109 109 109 104 104 104 99 99 99 961 108 104 100 96 105 101 97 94 96 93 90 92 89 87 88 86 84 822 99 91 84 79 96 89 83 78 85 80 75 81 77 73 77 74 71 683 90 80 72 66 87 78 71 65 75 68 63 71 66 62 68 64 60 584 83 71 62 56 80 69 61 55 66 59 54 64 58 53 61 56 52 505 76 63 54 48 74 62 54 47 59 52 47 57 51 46 55 49 45 436 70 57 48 42 68 56 47 41 54 46 41 52 45 40 50 44 40 377 65 52 43 37 63 51 42 37 49 41 36 47 40 36 45 40 35 338 60 47 39 33 59 46 38 33 45 37 32 43 37 32 42 36 31 299 56 43 35 29 55 42 35 29 41 34 29 40 33 29 38 33 28 26



FROSTED ACRYLIC LENS DESCRIPTION

Frosted lens provides enhanced glare control and light distribution options.

FIXTURE DATA

Part Number: WD1-UL-4M-50-FRAC CCT: 5000K Fixture Lumen Output: 11,200 lms Fixture Wattage: 120W (120-277V) Fixture E!cacy Rating: 93.3 lm/W Spacing Criteria Diagonal 1.34 Lateral Plane 0°-180° 90°-270° 1.26 1.26

CCT LIGHT OUTPUT CONVERSIONS

4000K: 0.9911Test date: 7-FEBUARY-2013 Tests done in accordance with LM79. Consult factory for LM79 and IES #les.

CLEAR ACRYLIC LENSDESCRIPTION

Clear lens delivers maximum light output.

FIXTURE DATA

Part Number: WD1-UL-4M-50-CLAC CCT: 5000K Fixture Lumen Output: 11,400 lms Fixture Wattage: 120W (120-277V) Fixture E!cacy Rating: 95 lm/W Spacing Criteria Diagonal 1.4 Lateral Plane 0°-180° 90°-270° 1.3 1.42



ZONAL LUMEN SUMMARY

ZONE LUMENS % FIXTURE0° & 30° 2,999.6 27%0° & 40° 4,855.9 43%0° & 60° 8,315.9 74%0° & 90° 10,594.0 95%

0° & 180° 11,200.0 100%

ZONAL LUMEN SUMMARY


0° & 180° 11,400.0 100%

CANDELA DISTRIBUTION ARRAY

0° 45° 90°0° 3,832 3,832 3,832

10° 3,804 3,781 3,77320° 3,604 3,615 3,620 30° 3,237 3,282 3,24440° 2,715 2,748 2,62550° 2,088 2,086 2,12560° 1,452 1,507 1,60170° 887 946 94280° 410 478 42090° 142 217 196


0° 45° 90°0° 3,851 3,851 3,851

10° 3,798 3,796 3,79220° 3,642 3,677 3,704 30° 3,381 3,459 3,52840° 2,934 3,174 2,95050° 2,329 2,468 2,10160° 1,597 1,387 1,78670° 858 891 28680° 299 167 15690° 74 97 107

CANDELA PLOT

CANDELA PLOT

AVERAGE LU

MIN

ANCE AN

GLE

AVERAGE LU

MIN

ANCE AN

GLE

RCRRCR

PHOTOMETRIC AND DISTRIBUTION DATA IS TYPICAL FOR THIS FIXTURE. PERFORMANCE WILL VARY DEPENDING ON LED AND POWER SUPPLY. THIS FIXTURE IS MANUFACTURED TO AN OVERALL PERFORMANCE TOLERANCE OF +/- 6%.

968

965

1936

1929

2904

2894

3871

3859

4 LED MODULES (4M)

0°"180°

0°"180°

10







LUMEN MAINTENANCE


FIXTURE


• HOUSING: - UL 5VA fiberglass housing (will not melt or burn).- Weatherability (f1) rated. Suitable for outdoor use with respect


• LENSES: Lenses are high efficiency, UV stabilized acrylic.• MOUNTING OPTIONS: Mounting clips are cable-ready. Optional

mounting bracket kit sold separately. • WARRANTY: Limited 5-year warranty. • AMBIENT OPERATING TEMPERATURES:




FIXTURE PERFORMANCE





DIMENSIONS

LENGTH WIDTH DEPTH WEIGHT52"3/8 %133& 14"5/8 %37.1& 6 %15.2& 23 %10.4&



POWER FACTOR

120V 0.996277V 0.931347V 0.960480V 0.911


120V 5.8%277V 13.2%347V 16.2%480V 18.3%



Target Mounting Heights Replaces Traditional Light Sources

10-40 Feet (3-12m) 250W Metal Halide. 4-Lamp T5HO. 2-Lamp F48T12.


11

ORDERING EXAMPLE:

WD1"UL"6M"40"CLAC"CRM"120"10V"CORDN






COLOR TEMP

404000K

505000K

LENS

CLACClear Acrylic

FRACFrosted Acrylic

MOUNTING

CRMStainless steel


mounting.

MBR1



WD1"UL"6M

SERIES

10V

DIMMING

10V0-10V Interface

CORD


C6W1

6ft cord. No plug.

C15W1

15ft cord. No plug.

VOLTAGE

120120V

277277V

208208V

347347V

220220V

480480V

240240V






12


52"3/8 %133&



14"5/8 %37.1&

6 %15.2&

BOTTOM VIEW

SIDE VIEW

TOP VIEW

END VIEW

6 LED MODULES (6M)



13


RC 80 70 50 30 10 0RW 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0

0 118 118 118 118 114 114 114 114 108 108 108 102 102 102 97 97 97 951 107 102 98 94 104 100 96 92 94 91 88 90 87 85 85 83 81 792 98 89 83 77 95 87 81 76 83 77 73 79 74 71 75 71 68 663 89 79 71 64 86 77 69 63 73 67 61 69 64 60 66 62 58 564 82 70 61 54 79 68 60 54 65 58 52 62 56 51 59 54 50 485 75 62 54 47 73 61 53 46 58 51 45 56 49 44 53 48 44 416 69 56 47 41 67 55 47 41 53 45 40 51 44 39 48 43 38 367 64 51 42 36 62 50 42 36 48 41 35 46 40 35 44 39 34 328 60 47 38 32 58 46 38 32 44 37 32 42 36 31 41 35 31 299 56 43 35 29 54 42 34 29 40 33 29 39 33 28 38 32 28 26




RC 80 70 50 30 10 0RW 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0

0 118 118 118 118 115 115 115 115 109 109 109 104 104 104 99 99 99 961 108 104 100 96 105 101 97 94 96 93 90 92 89 87 88 86 84 822 99 91 84 79 96 89 83 78 85 80 75 81 77 73 77 74 71 683 90 80 72 66 87 78 71 65 75 68 63 71 66 62 68 64 60 584 83 71 62 56 80 69 61 55 66 59 54 64 58 53 61 56 52 505 76 63 54 48 74 62 54 47 59 52 47 57 51 46 55 49 45 436 70 57 48 42 68 56 47 41 54 46 41 52 45 40 50 44 40 377 65 52 43 37 63 51 42 37 49 41 36 47 40 36 45 40 35 338 60 47 39 33 59 46 38 33 45 37 32 43 37 32 42 36 31 299 56 43 35 29 55 42 35 29 41 34 29 40 33 29 38 33 28 26





FIXTURE DATA

Part Number: WD1-UL-6M-50-FRAC CCT: 5000K Fixture Lumen Output: 16,600 lms Fixture Wattage: 180W (120-277V) Fixture E!cacy Rating: 92 lm/W Spacing Criteria Diagonal 1.34 Lateral Plane 0°-180° 90°-270° 1.26 1.26



CLEAR ACRYLIC LENSDESCRIPTION


FIXTURE DATA

Part Number: WD1-UL-6M-50-CLAC CCT: 5000K Fixture Lumen Output: 16,900 lms Fixture Wattage: 180W (120-277V) Fixture E!cacy Rating: 94 lm/W Spacing Criteria Diagonal 1.4 Lateral Plane 0°-180° 90°-270° 1.3 1.42



ZONAL LUMEN SUMMARY


0° & 180° 16,600.0 100%

ZONAL LUMEN SUMMARY


0° & 180° 16,900.0 100%

CANDELA PLOT

CANDELA PLOTCANDELA DISTRIBUTION ARRAY

0° 45° 90°0° 5,736 5,736 5,736

10° 5,674 5,667 5,66420° 5,367 5,429 5,450 30° 4,819 4,950 4,91140° 4,035 4,167 3,98650° 3,086 3,163 3,20960° 2,116 2,265 2,41470° 1,261 1,455 1,41780° 556 703 63190° 182 312 294

AVERAGE LU

MIN

ANCE AN

GLE


0° 45° 90°0° 5,708 5,708 5,708

10° 5,630 5,627 5,62220° 5,399 5,451 5,490 30° 5,012 5,128 5,22940° 4,349 4,705 4,37350° 3,453 3,659 3,11460° 2,367 2,056 2,64870° 1,272 1,321 42480° 444 248 23290° 110 143 159

AVERAGE LU

MIN

ANCE AN

GLE

RCRRCR

1435

1441

2869

2881

4304

4322

5739

5762

6 LED MODULES (6M)

0°"180°

0°"180°

14







LUMEN MAINTENANCE


FIXTURE


• HOUSING: - UL 5VA fiberglass housing (will not melt or burn).- Weatherability (f1) rated. Suitable for outdoor use with respect


• LENSES: Lenses are high efficiency, UV stabilized acrylic.• MOUNTING OPTIONS: Mounting clips area cable ready. Optional

mounting bracket kit sold separately.• WARRANTY: Limited product only 5-year warranty. • AMBIENT OPERATING TEMPERATURES:




FIXTURE PERFORMANCE





DIMENSIONS

LENGTH WIDTH DEPTH WEIGHT52"3/8 %133& 14"5/8 %37.1& 6 %15.2& 24 %10.9&



POWER FACTOR

120V 0.996277V 0.945347V 0.976480V 0.940


120V 6.5%277V 12.9%347V 18.0%480V 18.9%



Target Mounting Heights Comparable Traditional Light Sources

10-40 Feet (3-12m) 400W Metal Halide or 6-Lamp T5HO


15




ORDERING EXAMPLE: WD1"UL"8M"40"CLAC"CRM"120"10V"C6W





COLOR TEMP

404000K

505000K

WD1"UL"8M

SERIES

10V

DIMMING

10V0-10V Interface

VOLTAGE

120120V

277277V

208208V

347347V

220220V

480480V

240240V

LENS

CLACClear Acrylic

FRACFrosted Acrylic


MOUNTING

CRMStainless steel


mounting.

MBR1



CORD


C6W1

6ft cord. No plug.

C15W1

15ft cord. No plug.



16

8 LED MODULES (8M)


52"3/8 %133&



14"5/8 %37.1&

6 %15.2&

BOTTOM VIEW

SIDE VIEW

TOP VIEW

END VIEW



17

8 LED MODULES (8M)


RC 80 70 50 30 10 0RW 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0

0 118 118 118 118 115 115 115 115 108 108 108 103 103 103 97 97 97 951 107 103 98 94 104 100 96 92 95 92 89 90 87 85 86 84 82 792 98 90 83 77 95 87 81 76 83 78 73 79 75 71 75 72 69 663 89 79 71 64 86 77 70 64 73 67 62 70 65 60 67 62 58 564 82 70 61 55 79 68 60 54 65 58 53 62 56 52 60 55 50 485 75 63 54 47 73 61 53 47 59 51 46 56 50 45 54 48 44 426 70 57 48 41 67 55 47 41 53 46 40 51 44 40 49 43 39 377 65 51 43 37 63 50 42 36 48 41 36 46 40 35 45 39 35 338 60 47 39 33 58 46 38 32 44 37 32 43 36 32 41 35 31 299 56 43 35 29 55 42 35 29 41 34 29 39 33 28 38 32 28 26




RC 80 70 50 30 10 0RW 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0

0 118 118 118 118 115 115 115 115 109 109 109 104 104 104 99 99 99 971 109 104 100 96 105 101 98 94 97 94 91 92 90 87 88 86 84 822 99 91 85 79 96 89 83 78 85 80 76 81 77 73 78 74 71 693 90 80 72 66 88 78 71 65 75 69 64 72 67 62 69 64 61 584 83 71 63 56 80 70 62 55 67 60 54 64 58 53 61 56 52 505 76 64 55 48 74 62 54 48 60 52 47 57 51 46 55 50 45 436 70 57 48 42 68 56 48 42 54 47 41 52 45 40 50 44 40 387 65 52 43 37 63 51 43 37 49 42 36 47 41 36 46 40 35 338 61 47 39 33 59 46 38 33 45 37 32 43 37 32 42 36 32 309 56 43 35 30 55 42 35 29 41 34 29 40 33 29 39 33 28 27





FIXTURE DATA

Part Number: WD1-UL-8M-50-FRAC CCT: 5000K Fixture Lumen Output: 21,800 lms Fixture Wattage: 242W (120-277V) Fixture E!cacy Rating: 90 lm/W Spacing Criteria Diagonal 1.34 Lateral Plane 0°-180° 90°-270° 1.24 1.26



CLEAR ARCYLIC LENSDESCRIPTION


FIXTURE DATA

Part Number: WD1-UL-8M-50-CLAC CCT: 5000K Fixture Lumen Output: 22,300 lms Fixture Wattage: 242W (120-277V) Fixture E!cacy Rating: 92.1 lm/W Spacing Criteria Diagonal 1.4 Lateral Plane 0°-180° 90°-270° 1.3 1.38



ZONAL LUMEN SUMMARY


0° & 180° 21,800.0 100%

ZONAL LUMEN SUMMARY


0° & 180° 21,199.9 100%

CANDELA PLOT

CANDELA PLOTCANDELA DISTRIBUTION ARRAY

0° 45° 90°0° 7,719 7,719 7,719

10° 7,565 7,519 7,54420° 7,122 7,132 7,177 30° 6,382 6,460 6,46740° 5,342 5,450 5,35150° 4,080 5,170 4,18360° 2,804 2,919 2,96370° 1,700 1,813 1,75480° 780 1,813 1,75490° 254 360 379

AVERAGE LU

MIN

ANCE AN

GLE


0° 45° 90°0° 7,655 7,655 7,655

10° 7,495 7,449 7,49820° 7,184 7,191 7,266 30° 6,583 6,768 6,83640° 5,798 6,104 5,08950° 4,651 4,454 5,12460° 3,245 3,727 3,46370° 1,835 2,091 86080° 685 368 31290° 177 200 205

AVERAGE LU

MIN

ANCE AN

GLE

RCRRCR

1921

1932

3843

3865

5764

5797

7686

7729

0°"180°

0°"180°



18

INSTALLATION AND WIRING • ALL MODELS

WASHDOWN SERIESINSTALLATION INSTRUCTIONS

! THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH APPLICABLE BUILDING AND ELECTRICAL CODES, BY A QUALIFIED PERSON WHO IS FAMILIAR WITH THE CONSTRUTIONS AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.

NOTES:1. MAINTAIN A MINIMUM 22" SPACING BETWEEN LUMINAIRE HOUSING AND MOUNTING SURFACE IN PENDANT APPLICATIONS.

JUNCTION BOX (NOT INCLUDED)

CORD (NOT INCLUDED)

SUSPENSION CABLE (OPTIONAL)

CORD GRIP NOT INCLUDED)

JUNCTION BOX (NOT INCLUDED)CORD (OPTIONAL)

CORD GRIP (OPTIONAL)RIGID MOUNTING BRACKET

1. INSTALL FIXTURE RIGID MOUNTING BRACKET TO SURFACE OF CEILING. MOUNTING CENTER IS 36”O.C.2. ATTACH FIXTURE TO RIGID MOUNTING BRACKETS.3. BRING LINE VOLTAGE (BUILDING) POWER TO FIXTURE ON EITHER END AND FEED INTO SIDE OF FIXTURE. PROVIDE STRAIN RELIEF. USE WATERPROOF GLAND TO ENSURE WATERTIGHT INSTALLATION. FAILURE TO DO SO COULD VOID WARRANTY.4. REMOVE LENS AND OPEN LIGHT TRAY TO ACCESS POWER SUPPLIES. PULL POWER WIRE INTO WIREWAY WHERE POWER SUPPLIES ARE LOCATED.5. MAKE ALL FINAL WIRE CONNECTIONS. SECURE LIGHT TRAY. CLOSE COVER. 6. REFER TO WIRING DIAGRAMS FOR MORE INFORMATION. USE UL LISTED WIRE CONNECTORS AND UL LISTED WIRE.

SURFACE MOUNTING INSTRUCTIONS

060-00005 REV A

www.flextronics.com/lighting [email protected] 913-851-3000

Flextronics is a leading Electronics Manufacturing Services (EMS) provider that offers complete design, engineering, and manufacturing services to aerospace, automotive, computing, consumer digital, industrial, infrastructure, medical and mobile OEM customers. With a network of facilities in 30 countries, Flextronics helps customers design, build , ship, and service electronics products worldwide. Flextronics Lighting Solutions is a business unit within the Flextronics Energy division.

SUSPENSION MOUNTING INSTRUCTIONS1. SECURE SUSPENSION CABLE OR CHAIN TO STRUCTURE. SUSPENSION CABLE OR CHAIN MUST BE RATED FOR LOAD.2. CONNECT SUSPENSION CABLE TO ALL 4 MOUNTING TABS ON FIXTURE.3. BRING POWER FEED TO SIDE OF FIXTURE AND FEED THROUGH END. PROVIDE STRAIN RELIEF. USE WATERPROOF GLAND TO ENSURE WATERTIGHT INSTALLATION. FAILURE TO DO SO COULD VOID WARRANTY.4. REMOVE LENS AND OPEN LIGHT TRAY TO ACCESS POWER SUPPLIES. PULL POWER WIRE INTO WIREWAY WHERE POWER SUPPLIES ARE LOCATED.5. MAKE ALL FINAL WIRE CONNECTIONS. SECURE LIGHT TRAY. CLOSE COVER. 6. REFER TO WIRING DIAGRAMS FOR MORE INFORMATION. USE UL LISTED WIRE CONNECTORS AND UL LISTED WIRE.



19


WASHDOWN SERIESINSTALLATION INSTRUCTIONS


JUNCTION BOX (NOT INCLUDED)RIGID STEM (NOT INCLUDED)

CORD GRIP (OPTIONAL)

CORD (OPTIONAL)

RIGID MOUNTING BRACKET

NOTES:1. MAINTAIN A MINIMUM 22" SPACING BETWEEN LUMINAIRE HOUSING AND MOUNTING SURFACE IN PENDANT APPLICATIONS.

FOR FIXTURES WITH MULTIPLE POWER SUPPLIES, POWER SUPPLIES CAN BE SWITCHED OR DIMMED SEPARATELY.

060-00005 REV A



!WARNING - RISK OF ELECTRICAL SHOCKDISCONNECT ELECTRICAL POWER PRIOR TO PERFORMING MAINTENANCE ON THE FIXTURE.

STEM MOUNT MOUNTING INSTRUCTIONS

INCOMING LINE

VOLTAGEGround

SwitchlegNeutral

BOND GROUNDTO ENCLOSURE

LED Driver LED Driver

WASHDOWN 4 MODULE (WD1-UL-4M)

1. ATTACH RIGID STEM (NOT INCLUDED) TO FIXTURE MOUNTING BOX. (REMOVE FIXTURE MOUNTING BRACKET FROM BOX IF NEEDED)2. OPEN WIREWAY CHANNEL COVER. RAISE FIXTURE TO FIXTURE MOUNTING BOX. USING FIXTURE MOUNTING BRACKET, ATTACH FIXTURE TO FIXTURE MOUNTING BOX.3. FEED POWER WIRE THROUGH RIGID STEM AND FIXTURE MOUNTING BOX AND ASSEMBLY INTO WIREWAY CHANNEL. 5. ATTACH FIXTURE TO MOUNTING BRACKET ASSEMBLY, USING SCREWS PROVIDED. 6. MAKE FINAL CONNECTIONS INSIDE WIREWAY CHANNEL. CLOSE COVER.7. REFER TO WIRE DIAGRAMS FOR MORE INFORMATION. USE UL LISTED WIRE CONNECTORS AND UL LISTED WIRE.

WIRING DIAGRAMS

MIN 90°C SUPPLY CONDUCTORS



20




WASHDOWN SERIESWIRING DIAGRAMS


060-00005 REV A




WASHDOWN 6 MODULE (WD1-UL-6M) !

WARNING - RISK OF ELECTRICAL SHOCKDISCONNECT ELECTRICAL POWER PRIOR TO PERFORMING MAINTENANCE ON THE FIXTURE.

WASHDOWN 8 MODULE(WD1-UL-8M)

INCOMING LINE

VOLTAGEGround

SwitchlegNeutral


LED Driver LED Driver

INCOMING LINE

VOLTAGEGround

SwitchlegNeutral


LED Driver LED Driver DIMMIONG IS OPTIONAL.THESE CONNECTIONS DONOT OCCUR ON NON-DIMMING POWER SUPPLIES.

INTERNAL LEDMOD WIRINGHARNESSE

WHEN DIMMING ISNOT INSTALLED CAPOFF WIRES


!WARNING - RISK OF ELECTRICAL SHOCKDISCONNECT ELECTRICAL POWER PRIOR TO PERFORMING MAINTENANCE ON THE FIXTURE.



21

Lusio Washdown Series lighting #xtures have been investigated and listed by the National Sanitation Foundation (NSF) as #xtures that will not compromise the sanitation requirements of food/beverage processing areas. Speci#cally, Lusio Washdown Series #xtures meet the NSF Non-Food Zone and Splash Zone certi#cations as de#ned in this table:

Lusio Washdown Certi"ed NSF Certi"cation Equipment Location, Use, and Explanation Sample Lighting Applications

DNon-Food Zone All exposed surfaces other than food or splash

zone.Kitchens, dry process areas, food storage areas, and damp process areas.

DSplash Zone Surfaces other than food zone subject to routine

splash, spillage, or other soiling during normal use.Wet or damp processing areas where decontamination or high pressure hose washdowns are routinely performed.

Food Zone Surfaces which the food normally contacts, and those surfaces from which the food may drain, drip, or splash back onto surfaces normally in contact with food.

Not generally applicable to lighting equipment.

NSF FOOD ZONE CLASSIFICATIONS



22

IMPORTANT: READ ALL INSTRUCTIONS THOROUGHLY AND CAREFULLY PRIOR TO INSTALLATION OF WASHDOWN FIXTURES AND RETAIN FOR FUTURE REFERENCE.!

7KH�:DVKGRZQ�6HULHV�RI�FRPPHULFDO�DQG�LQGXVWULDO�/('�ZDWHUWLJKW�¿[WXUHV�LV�IRU�FHLOLQJ�DSSOLFDWLRQV�ZLWK�6XVSHQVLRQ��SHQGDQW��FRQGXLW��RU�VXUIDFH�PRXQW�LQVWDOODWLRQ�PHWKRGV�

:DVKGRZQ�¿[WXUHV�DUH�GHVLJQHG�IRU�XVH�LQ��9�RU��9��+]�SURWHFWHG�FLUFXLWV��6L]H�OLQH�YROWDJH�VHU�YLFH�ZLUHV�DV�UHTXLUHG�SHU�WKH�1DWLRQDO�(OHFWULFDO�&RGH��1(&��,QVWDOO�¿[WXUHV�LQ�DFFRUGDQFH�WR�DOO�DSSOLFDEOH�EXLOGLQJ�FRHV�DQG�UHTXLUHPHQWV�

)RU�PRUH�LQIRUPDWLRQ�RU�TXHVWLRQV�UHJDUGLQJ�WKH�LQVWDOODWLRQ�RU�XVH�RI�WKH�:DVKGRZQ�¿[WXUH��FDOO��

:$51,1*• 2QO\�TXDOL¿HG�SHUVRQQHO�VKRXOG�LQVWDOO��LQVSHFW�DQG�PDLQWDLQ�WKLV�SURGXFW�LQ�DFFRUGDQFH�ZLWK�DOO�DSSOLFDEOH�EXLOGLQJ�

DQG�HOHFWULFDO�FRGHV��• 7R�DYRLG�HOHFWULF�VKRFN��GLVFRQQHFW�HOHFWULFDO�SRZHU��/LQH�SRZHU��EHIRUH�DQG�GXULQJ�LQVWDOODWLRQ�DQG�PDLQWHQDQFH�• 9HULI\�VXSSO\�YROWDJH�LV�VDPH�DV�WKDW�RI�UDWHG�¿[WXUH�YROWDJH��7KH�HOHFWULFDO�FKDUDFWHULVWLFV�RI�WKH�:DVKGRZQ�¿[WXUH�

DUH�FOHDUO\�LQGLFDWHG�RQ�WKH�SURGXFW�ODEHO�• :DVKGRZQ�¿[WXUHV�DUH�VXLWDEOH�IRU�GU\��GDPS��RU�ZHW�ORFDWLRQV��• '2�127�WRXFK�WKH�OHQV�RI�¿[WXUH��,I�FRQWDFW�LV�PDGH��FOHDQ�JODVV�ZLWK�LVRSURS\O�DOFRKRO��• %H�FDXWLRXV�RI�DQ\�VKDUS�HGJHV��:HDU�SURSHU�VDIHW\�JHDU��VXFK�DV�JORYHV�DQG�VDIHW\�JODVVHV��ZKLOH�KDQGOLQJ�

0$,17(1$1&(• :DVKGRZQ�¿[WXUHV�VKRXOG�EH�GU\�GXVWHG�SHULRGLFDOO\��LI�DSSOLFDEOH��DQG�KRVHG�GRZQ�DV�QHHGHG�WR�FOHDQ�GHEULV�

DFFXPXODWLRQ�• 7KH�DFU\OLF�DQG�IURVWHG�OHQV�FDQ�EH�FOHDQHG�ZLWK�FRPPRQ�JODVV�FOHDQHU��'2�127�DWWHPSW�WR�FOHDQ�ZKHQ�¿[WXUH�LV�

WXUQHG�RQ�DQG�LOOXPLQDWHG�

7528%/(6+227,1*:$51,1*��:$51,1*��$/:$<6�GLVFRQQHFW�SRZHU�IURP�KLJKED\�¿[WXUH�SULRU�WR�VHUYLFLQJ�RU�WURXEOHVKRRWLQJ��7XUQ�FLUFXLW�EUHDNHU�SDQHOERDUG�GLVFRQQHW�RII��'2�127�DWWHPSW�WR�WURXEOHVKRRW�ZKHQ�SRZHU�LV�VWLOO�RQ�

,VVXH��/LJKW�¿[WXUH�GRHV�QRW�FRPH�RQ• 6WHS��&KHFN�EUHDNHU�WR�HQVXUH�SRZHU��OLQH�YROWDJH��LV�EHLQJ�GHOLYHUHG�WR�KLJKED\�¿[WXUH�• 6WHS��&KHFN�HOHFWULFDO�FRQQHFWLRQV��5HIHU�WR�ZLULQJ�GLDJUDP�LQ�LQVWDOODWLRQ�LQVWUXFWLRQV�WR�YHULI\�FRQ¿UP�WKDW�¿[-

WXUH�LV�ZLUHG�FRUUHFWO\�DQG�SRZHU�VXSSOLHV�DUH�FRQQHFWHG�WR�OLJKW�HQJLQH�• 6WHS��,I�VWHSV��RU��GR�QRW�VROYH�WKH�LVVXH��FRQWDFW�IDFWRU\�IRU�UHSODFHPHQW�DW��

,VVXH��/('�LV�RXW�LQ�PRGXOH�• 6WHS��/('�KDV�IDLOHG��)L[WXUH�ZLOO�FRQWLQXH�WR�RSHUDWH�DW�UHGXFHG�OXPHQ�RXWSXW��)L[WXUH�UHSODFHPHQW�LV�RSWLRQDO��

&RQWDFW�IDFWRU\�IRU�UHSODFHPHQW�

:$55$17<�6833257�&RQWDFW�OLJKWLQJ#ÀH[WURQLFV�FRP

SAFETY GUIDELINES • ALL MODELS



23

CHEMICAL

ACETAL/PO

M

NYLO

N

POLYCA

RBON

ATE

ACRYLIC

316SS

Acetaldehyde A A C1 D A

Acetamide A A D A A

Acetate Solvent N/A A N/A N/A A

Acetic Acid D D B1 N/A B

Acetic Acid 20% C D A1 B-C A

Acetic Acid 80% D D B1 D B

Acetic Acid, Glacial D B B1 D A

Acetic Anhydride D A1 D D A

Acetone A A D D A

Acetyl Bromide N/A D N/A N/A N/A

Acetyl Chloride (dry) D B D N/A A

Acetylene A A D N/A A

Acrylonitrile N/A A1 D D A1

Adipic Acid N/A N/A N/A N/A A2

Alcohols:Amyl A A1 B1 D A

Alcohols:Benzyl A B1 D D B

Alcohols:Butyl A D A2 D A

Alcohols: Diacetone A A N/A D A

Alcohols:Ethyl A1 A1 B2 D A

Alcohols:Hexyl A A N/A D A

Alcohols: Isobutyl A A1 A D A

Alcohols: Isopropyl A D A2 D B

Alcohols: Methyl A B1 B1 D A

Alcohols: Octyl A A N/A D A

Alcohols: Propyl A D N/A D A

Aluminum Chloride N/A B1 A1 A B

Aluminum Chloride 20% C D A1 A C1

Aluminum Fluoride C A1 N/A N/A D

Aluminum Hydroxide A A1 B1 N/A C1

Aluminum Nitrate B1 A1 A1 N/A A

Aluminum Potassium Sulfate 10% C D A1 N/A A

Aluminum Potassium Sulfate 100% C D A2 N/A B2

Aluminum Sulfate B1 A2 A A B2

Alums N/A A N/A N/A A

Amines D D D N/A A

Ammonia 10% D A D A A

Ammonia Nitrate C D N/A N/A A

Ammonia, anhydrous D A1 D N/A A2

Ammonia, liquid D B1 D A A2

Ammonium Acetate N/A A B N/A A

Ammonium Bi#uoride D N/A N/A N/A B1

Ammonium Carbonate D A1 N/A N/A B

Ammonium Caseinate D N/A N/A N/A A

Ammonium Chloride B B A2 E B2

Ammonium Hydroxide C A D E A1

Ammonium Nitrate A2 A1 N/A N/A A

Ammonium Oxalate A2 N/A A1 N/A A

Ammonium Persulfate D D N/A N/A B

Ammonium Phosphate, Dibasic B2 C1 A2 N/A C

Ammonium Phosphate, Monobasic B B N/A N/A C

Ammonium Phosphate, Tribasic B B N/A N/A B

Ammonium Sulfate B1 A1 A2 A B

Ammonium Sul"te D A1 N/A N/A B

Ammonium Thiosulfate B N/A N/A N/A A

Amyl Acetate B1 B2 D A A

CHEMICAL

ACETAL/PO

M

NYLO

N

POLYCA

RBON

ATE

ACRYLIC

316SS

Amyl Alcohol A A1 B1 D A

Amyl Chloride A C1 D N/A A2

Aniline A1 A2 D D B

Aniline Hydrochloride N/A D D N/A D

Antifreeze D D N/A N/A A

Antimony Trichloride N/A D A2 N/A D

Aqua Regia (80% HCl, 20% HNO3) D D D D D

Arochlor 1248 N/A A1 N/A N/A B

Aromatic Hydrocarbons A N/A N/A N/A C

Arsenic Acid D C1 A1 A A2

Arsenic Salts N/A A N/A N/A N/A

Asphalt B2 A D N/A A

Barium Carbonate A A1 A2 N/A B

Barium Chloride A A A A A1

Barium Cyanide B A1 N/A N/A A2

Barium Hydroxide D A1 D N/A B

Barium Nitrate B2 A1 D N/A B

Barium Sulfate B2 A1 D N/A B1

Barium Sul"de A A1 N/A N/A B2

Beer A1 A1 A2 N/A A

Beet Sugar Liquids B A N/A N/A A

Benzaldehyde A A1 D D B

Benzene A1 A1 D D B

Benzene Sulfonic Acid N/A D D N/A B

Benzoic Acid B D B1 A B

Benzol A D D D A1

Benzonitrile N/A N/A A1 N/A D

Benzyl Chloride A A2 N/A N/A B1

Bleach:Clorox D A N/A N/A A

Bleaching Liquors N/A C N/A N/A N/A

Borax (Sodium Borate) B A N/A N/A A

Boric Acid A B A N/A A1

Brewery Slop B N/A N/A N/A A

Bromine D D C1 D D

Butadiene A C1 D N/A A1

Butane A A2 D A A2

Butanol (Butyl Alcohol) A B1 B1 B-C A1

Butter A N/A N/A N/A A

Buttermilk A B1 A1 N/A A

Butyl Amine C1 A2 D N/A A

Butyl Ether D A2 N/A N/A A1

Butyl Phthalate N/A A2 D N/A B2

Butylacetate A A D N/A A

Butylene A B1 D N/A A

Butyric Acid A C1 D D B2

Calcium Bisulfate N/A N/A D N/A A

Calcium Bisul"de D A N/A N/A B

Calcium Bisul"te D A2 D N/A A

Calcium Carbonate A A C2 N/A B

Calcium Chlorate A N/A N/A N/A N/A

Calcium Chloride D A1 A A B2

Calcium Hydroxide D A2 D C B

Calcium Hypochlorite D D D A B1

Calcium Nitrate D A1 A2 N/A B2

Calcium Oxide A B N/A N/A A

The following charts are provided as general guidance for selecting an acrylic lens for your application.

EXPLANATION OF FOOTNOTES: A = Excellent; A1= Excellent, Satisfactory to 72°F (22° C); A2 = Excellent, Satisfactory to 120°F (48° C); B = Good: Minor E(ect, slight corrosion or discoloration; B1= Good, Satisfactory to 72°F (22° C); B2 = Good, Satisfactory to 120°F (48° C); C = Fair, Moderate E(ect, not recommended for continuous use. Softening, loss of strength, swelling may occur; D = Severe E(ect, not recommended for ANY use. N/A = Information Not Available.

CONTINUED

CHEMICAL RESISTANCE • ALL MODELS



24

CHEMICAL

ACETAL/PO

M

NYLO

N

POLYCA

RBON

ATE

ACRYLIC

316SS

Calcium Sulfate D D A2 N/A B

Calgon A A N/A N/A A

Cane Juice A A N/A N/A A

Carbolic Acid (Phenol) D D D D B

Carbon Bisul"de A A N/A N/A B

Carbon Dioxide (dry) A A1 N/A A A1

Carbon Dioxide (wet) A A1 N/A A A1

Carbon Disul"de A1 B1 D D B

Carbon Monoxide A A1 N/A A A

Carbon Tetrachloride B1 D D C B

Carbon Tetrachloride (dry) N/A N/A N/A D B2

Carbon Tetrachloride (wet) A1 N/A N/A D A2

Carbonated Water A A N/A N/A A

Carbonic Acid B1 A1 A1 N/A A

Catsup B A N/A N/A A

Chloric Acid D D N/A N/A C1

Chlorinated Glue D N/A N/A N/A A

Chlorine (dry) D D A C B

Chlorine Water D C1 B C C

Chlorine, Anhydrous Liquid A1 D C D C

Chloroacetic Acid D D D D A1

Chlorobenzene (Mono) D D D N/A B

Chlorobromomethane N/A C N/A N/A N/A

Chloroform A A D D A

Chlorosulfonic Acid D D C1 D B2

Chocolate Syrup A A A N/A A

Chromic Acid 10% D D B C B

Chromic Acid 30% D D C D B2

Chromic Acid 5% D D B N/A A

Chromic Acid 50% D D D D B2

Chromium Salts N/A B N/A N/A N/A

Cider A A A N/A A

Citric Acid B1 A1 A1 A A2

Citric Oils B N/A N/A N/A A

Clorox (Bleach) D A N/A A A

Co'ee A A N/A N/A A

Copper Chloride A D N/A N/A D

Copper Cyanide A D D N/A B

Copper Fluoborate B N/A N/A N/A D

Copper Nitrate A D D N/A A2

Copper Sulfate >5% D D A1 A B

Copper Sulfate 5% D D A1 A B

Cream A A N/A N/A A

Cresols D D D D A

Cresylic Acid D D D N/A A

Cupric Acid N/A D A1 N/A B2

Cyanic Acid D N/A N/A N/A A

Cyclohexane A1 A B B A

Cyclohexanone A A D D A2




Cream A A N/A N/A A

Cresols D D D D A




Cream A A N/A N/A A

Cresols D D D D A

Cresylic Acid D D D N/A A

Cupric Acid N/A D A1 N/A B2

Cyanic Acid D N/A N/A N/A A

Cyclohexane A1 A B B A

Cyclohexanone A A D D A2

Detergents A1 A1 A1 N/A A1

CHEMICAL

ACETAL/PO

M

NYLO

N

POLYCA

RBON

ATE

ACRYLIC

316SS

Diacetone Alcohol N/A A1 D D B

Dichlorobenzene N/A D D N/A B1

Dichloroethane A1 A1 D N/A B

Diesel Fuel A A A2 A A1

Diethyl Ether N/A A1 D D B2

Diethylamine B A D N/A A

Diethylene Glycol A1 A1 B1 A A

Dimethyl Aniline D A D N/A B2

Dimethyl Formamide D A D N/A B

Diphenyl N/A N/A N/A N/A B

Diphenyl Oxide D N/A N/A N/A A

Dyes C A N/A N/A A

Epsom Salts (Magnesium Sulfate) B A1 A1 N/A B

Ethane A1 D N/A N/A A1

Ethanol A1 A1 A D A

Ethanolamine D A N/A N/A A

Ether A1 A N/A D A

Ethyl Acetate A A2 D D B

Ethyl Benzoate N/A N/A D N/A N/A

Ethyl Chloride A1 A1 D D A

Ethyl Ether A1 A1 N/A N/A B

Ethyl Sulfate N/A N/A N/A N/A D

Ethylene Bromide N/A N/A D N/A A

Ethylene Chloride A1 A D A B

Ethylene Chlorohydrin D D D N/A B

Ethylene Diamine D D A2 N/A B

Ethylene Dichloride B1 A1 D N/A B

Ethylene Glycol (PURE) B A B1 B B

Ethylene Oxide D A1 C1 B B

Fatty Acids A A1 B1 N/A A

Ferric Chloride D A A2 N/A D

Ferric Nitrate D A1 A1 N/A B

Ferric Sulfate D A1 A1 N/A A

Ferrous Chloride D D D N/A D

Ferrous Sulfate D D A1 A B

Fluoboric Acid A1 D N/A N/A B

Fluorine D D C N/A A

Fluosilicic Acid A1 D A1 N/A B

Formaldehyde 100% A D A2 N/A A

Formaldehyde 40% A2 A A1 A A

Formic Acid A2 D A1 D A1

Freon 113 A N/A B1 N/A N/A

Freon 12 B A1 N/A N/A B

Freon 22 A B N/A N/A A

Freon TF A D B N/A A

Freonr 11 D D N/A N/A A

Fruit Juice D A N/A N/A A

Fuel Oils A A1 B1 N/A A

Furan Resin D N/A N/A N/A A

Furfural A B D N/A B

Gallic Acid N/A A N/A N/A B

Gasoline (high-aromatic) B A C D A

Gasoline, leaded, ref. A A2 C D A2

Gasoline, unleaded A A2 C D A2

Gelatin B A1 N/A N/A A2

Glucose A A A1 N/A A

Glue, P.V.A. A A1 N/A N/A A2

Glycerin A A1 A2 A A

Glycolic Acid A N/A N/A N/A A

Gold Monocyanide A N/A N/A N/A A

Grape Juice A A N/A N/A A

Grease D N/A N/A N/A A

Heptane A A B A A

Hexane A B D A A

Honey A A A1 N/A A

EXPLANATION OF FOOTNOTES: A = Excellent; A1= Excellent, Satisfactory to 72°F (22° C); A2 = Excellent, Satisfactory to 120°F (48° C); B = Good: Minor E(ect, slight corrosion or discoloration; B1= Good, Satisfactory to 72°F (22° C); B2 = Good, Satisfactory to 120°F (48° C); C = Fair, Moderate E(ect, not recommended for continuous use. Softening, loss of strength, swelling may occur; D = Severe E(ect, not rec-ommended for ANY use. N/A = Information Not Available.

CONTINUED




25


CHEMICAL

ACETAL/PO

M

NYLO

N

POLYCA

RBON

ATE

ACRYLIC

316SS

Hydraulic Oil (Petro) B A1 N/A N/A A

Hydraulic Oil (Synthetic) N/A A1 N/A N/A A

Hydrazine B N/A D N/A A

Hydrobromic Acid 100% D D N/A N/A D

Hydrobromic Acid 20% C D B D D

Hydrochloric Acid 100% C D D N/A D

Hydrochloric Acid 20% C D B1 B D

Hydrochloric Acid 37% C D D D D

Hydrochloric Acid, Dry Gas N/A A1 N/A A D

Hydrocyanic Acid B B N/A N/A A

Hydrocyanic Acid (Gas 10%) C N/A B1 N/A N/A

Hydro#uoric Acid 100% D D D N/A B1

Hydro#uoric Acid 20% D C1 D N/A D

Hydro#uoric Acid 50% D D D D D

Hydro#uoric Acid 75% D D D N/A D

Hydro#uosilicic Acid 100% A D N/A N/A D

Hydro#uosilicic Acid 20% B D N/A N/A B1

Hydrogen Gas N/A A2 A2 N/A A

Hydrogen Peroxide 10% D C1 A2 A B

Hydrogen Peroxide 100% D D A D A2

Hydrogen Peroxide 30% D D A2 C B

Hydrogen Peroxide 50% D D A2 C A2

Hydrogen Sul"de (aqua) C C1 A A A

Hydrogen Sul"de (dry) N/A C1 N/A N/A A

Hydroquinone A D N/A N/A B

Hydroxyacetic Acid 70% A N/A N/A N/A N/A

Ink B C N/A N/A C

Iodine D A B A D

Iodine (in alcohol) D C N/A N/A N/A

Iodoform N/A N/A N/A N/A A

Isooctane N/A A1 B1 N/A A1

Isopropyl Acetate D B1 D N/A A

Isopropyl Ether D A1 D N/A A

Isotane N/A D N/A N/A N/A

Jet Fuel (JP3, JP4, JP5) A1 C B N/A A

Kerosene A2 A D D A

Ketones D A2 D N/A A

Lacquer Thinners D A1 B N/A A

Lacquers D A1 D N/A A

Lactic Acid B B A B B1

Lard A A1 A1 N/A A

Latex B A1 N/A N/A A2

Lead Acetate B A A N/A B1

Lead Nitrate N/A N/A N/A N/A B1

Lead Sulfamate A B1 A1 N/A C

Ligroin B D N/A N/A A

Lime B A1 N/A N/A A

Linoleic Acid B N/A N/A N/A A

Lithium Chloride A N/A B1 N/A A2

Lithium Hydroxide N/A N/A D N/A B

Lubricants A A1 A1 N/A A2

Lye: Ca(OH)2 Calcium Hydroxide D A2 D C B

Lye: KOH Potassium Hydroxide A C D A A1

Lye: NaOH Sodium Hydroxide C A D B B1

Magnesium Bisulfate N/A A1 A1 N/A A1

Magnesium Carbonate A N/A A1 N/A B

Magnesium Chloride B1 A1 A2 A D

Magnesium Hydroxide A B1 A1 N/A A1

Magnesium Nitrate A A1 A1 N/A B

Magnesium Oxide A N/A N/A N/A A

Magnesium Sulfate (Epsom Salts) B A1 A1 A B

Maleic Acid A A N/A N/A B

Maleic Anhydride D N/A N/A N/A A

Malic Acid A A N/A N/A A2

Manganese Sulfate A1 A2 A1 N/A B2

CHEMICALACETA

L/POM

NYLO

N

POLYCA

RBON

ATE

ACRYLIC

316SS

Mash A A N/A N/A A

Mayonnaise A A N/A N/A A

Melamine A A N/A N/A D

Mercuric Chloride (dilute) B D A A D

Mercuric Cyanide N/A A2 N/A N/A C

Mercurous Nitrate N/A N/A A2 N/A A1

Mercury A A D A A

Methane A A N/A A A

Methanol (Methyl Alcohol) A B1 B1 D A

Methyl Acetate B A2 D N/A B

Methyl Acetone D A N/A N/A A

Methyl Acrylate B N/A N/A N/A N/A

Methyl Alcohol 10% A B1 B1 N/A A

Methyl Bromide D B1 N/A N/A A

Methyl Butyl Ketone D D D N/A A

Methyl Cellosolve D C D N/A B

Methyl Chloride B B1 D A A

Methyl Dichloride D C N/A N/A N/A

Methyl Ethyl Ketone C A1 D D A

Methyl Ethyl Ketone Peroxide N/A N/A N/A N/A N/A

Methyl Isobutyl Ketone N/A B2 D D B

Methyl Isopropyl Ketone N/A A D N/A A

Methyl Methacrylate D N/A N/A N/A B

Methylamine D N/A N/A N/A A

Methylene Chloride B C1 D N/A B

Milk A A A N/A A

Mineral Spirits A A C N/A A

Molasses A A1 N/A N/A A

Monochloroacetic acid D D D N/A A1

Monoethanolamine D A N/A N/A A

Morpholine N/A A2 D N/A A1

Motor oil B A2 A A A2

Mustard C A A N/A A

Naphtha A1 A B N/A A

Naphthalene A1 A1 N/A N/A A

Natural Gas B N/A N/A N/A A

Nickel Chloride A C1 A2 N/A C

Nickel Nitrate N/A A1 D N/A B2

Nickel Sulfate A A1 A A B1

Nitrating Acid (<15% HNO3) N/A N/A A N/A D

Nitrating Acid (>15% H2SO4) D N/A N/A N/A C

Nitrating Acid (S1% Acid) N/A N/A N/A N/A A

Nitrating Acid (S15% H2SO4) N/A N/A N/A N/A C

Nitric Acid (20%) D D B1 A A

Nitric Acid (50%) D D B B-C A1

Nitric Acid (5-10%) D D A N/A A

Nitric Acid (Concentrated) D D C1 D A1

Nitrobenzene C B1 D D B

Nitrogen Fertilizer N/A N/A N/A N/A N/A

Nitromethane A B1 D N/A A1

Nitrous Acid N/A N/A N/A N/A B

Nitrous Oxide N/A C N/A A B

Oils: Aniline D A N/A N/A A

Oils: Anise D N/A N/A N/A A

Oils: Bay D N/A N/A N/A A

Oils: Bone D N/A N/A N/A A

Oils: Castor A A N/A N/A A

Oils: Cinnamon D N/A C N/A A

Oils: Citric A A A N/A A

Oils: Clove N/A N/A N/A N/A A

Oils: Coconut A N/A N/A N/A A

Oils: Cod Liver B N/A N/A N/A A

Oils: Corn A A N/A N/A A

Oils: Cottonseed A B N/A N/A A

Oils: Creosote D D N/A N/A B

CONTINUED




26

CHEMICAL

ACETAL/PO

M

NYLO

N

POLYCA

RBON

ATE

ACRYLIC

316SS

Oils:Diesel Fuel (20, 30, 40, 50) D A N/A N/A A

Oils:Fuel (1, 2, 3, 5A, 5B, 6) D A B N/A A

Oils:Ginger A N/A N/A N/A D

Oils:Hydraulic Oil (Petro) B A1 N/A N/A A

Oils:Hydraulic Oil (Synthetic) N/A A1 N/A N/A A

Oils:Lemon D N/A N/A N/A A

Oils:Linseed A A1 N/A N/A A

Oils:Mineral A A A A A

Oils:Olive A A1 A2 N/A A

Oils:Orange D N/A C1 N/A A

Oils:Palm A N/A N/A N/A A

Oils:Peanut A N/A N/A N/A A

Oils:Peppermint D N/A N/A N/A A

Oils:Sesame Seed D N/A N/A N/A A

Oils:Silicone A A1 A C A

Oils:Soybean A A N/A N/A A

Oils: Sperm (whale) D N/A N/A N/A A

Oils:Tanning D N/A N/A N/A A

Oils:Transformer A A1 N/A N/A A

Oils:Turbine A A N/A N/A A

Oleic Acid A A N/A N/A A

Oleum 100% D D N/A N/A A

Oleum 25% D D N/A N/A B

Oxalic Acid (cold) B B2 A A A

Ozone C D D A A

Palmitic Acid A A N/A N/A A1

Para!n A A1 A1 A A

Pentane B A1 A N/A C

Perchloric Acid C D D A C

Perchloroethylene B C1 D D A1

Petrolatum B D N/A N/A A

Petroleum B A1 C N/A A1

Phenol (10%) B D B1 D B

Phenol (Carbolic Acid) D D D D B

Phosphoric Acid (>40%) D B1 A A-B D

Phosphoric Acid (crude) D B1 A N/A B

Phosphoric Acid (molten) D N/A N/A N/A C

Phosphoric Acid (S40%) D B1 A N/A C

Phosphoric Acid Anhydride D N/A D N/A N/A

Phosphorus B N/A N/A N/A A2

Phosphorus Trichloride D N/A C D A2

Photographic Developer D N/A A2 A A

Photographic Solutions D A1 A1 A N/A

Phthalic Acid C B1 N/A N/A A

Phthalic Anhydride C N/A A1 N/A A

Picric Acid A C1 D A BPlating Solutions, Antimony Plating

130°F A D N/A N/A A

Plating Solutions, Arsenic Plating 110°F A A N/A N/A A

Plating Solutions, Brass Plating: High-Speed Brass Bath 110°F A A N/A N/A A

Plating Solutions, Brass Plating: Regular Brass Bath 100°F A A N/A N/A A

Plating Solutions, Bronze Plating: Cu-Cd Bronze Bath R.T. A A N/A N/A A

Plating Solutions, Bronze Plating: Cu-Sn Bronze Bath 160°F B A N/A N/A A

Plating Solutions, Bronze Plating: Cu-Zn Bronze Bath 100°F A A N/A N/A A

Plating Solutions, Cadmium Plating: Cyanide Bath 90°F A A N/A N/A A

Plating Solutions, Cadmium Plating: Fluoborate Bath 100°F C D N/A N/A A

Plating Solutions, Chromium Plating: Barrel Chrome Bath 95°F D D N/A N/A D

Plating Solutions, Copper Plating (Acid): Copper Fluoborate Bath 120°F C D N/A N/A D

Plating Solutions, Copper Plating (Acid): Copper Sulfate Bath R.T. A D N/A N/A D

CHEMICAL

ACETAL/PO

M

NYLO

N

POLYCA

RBON

ATE

ACRYLIC

316SS

Plating Solutions, Copper Plating (Cyanide): Copper Strike Bath 120°F A A N/A N/A A

Plating Solutions, Copper Plating (Cyanide): High-Speed Bath 180°F B A N/A N/A A

Plating Solutions, Copper Plating (Cyanide): Rochelle Salt Bath 150°F B A N/A N/A A

Plating Solutions, Copper Plating (Misc): Copper (Electroless) D A N/A N/A N/A

Plating Solutions, Copper Plating (Misc): Copper Pyrophosphate A A N/A N/A A

Plating Solutions, Gold Plating: Acid 75°F N/A A N/A N/A C

Plating Solutions, Gold Plating: Cyanide 150°F N/A A N/A N/A A

Plating Solutions, Gold Plating: Neutral 75°F N/A A N/A N/A C

Plating Solutions, Indium Sulfamate Plating R.T. N/A D N/A N/A C

Plating Solutions, Iron Plating: Ferrous Am Sulfate Bath 150°F N/A D N/A N/A C

Plating Solutions, Iron Plating: Ferrous Chloride Bath 190°F N/A D N/A N/A D

Plating Solutions, Iron Plating: Ferrous Sulfate Bath 150°F N/A D N/A N/A C

Plating Solutions, Iron Plating: Fluoborate Bath 145°F N/A D N/A N/A D

Plating Solutions, Iron Plating: Sulfamate 140°F N/A D N/A N/A D

Plating Solutions, Iron Plating: Sulfate-Chloride Bath 160°F N/A D N/A N/A D

Plating Solutions, Lead Fluoborate Plating N/A D N/A N/A C

Plating Solutions, Nickel Plating: Electroless 200°F N/A D N/A N/A N/A

Plating Solutions, Nickel Plating: Fluoborate 100-170°F N/A D N/A N/A C

Plating Solutions, Nickel Plating: High-Chloride 130-160°F N/A D N/A N/A C

Plating Solutions, Nickel Plating: Sulfamate 100-140°F N/A A N/A N/A C

Plating Solutions, Nickel Plating: Watts Type 115-160°F N/A A N/A N/A C

Plating Solutions, Rhodium Plating 120°F N/A D N/A N/A D

Plating Solutions, Silver Plating 80-120°F N/A A N/A N/A A

Plating Solutions, Tin-Fluoborate Plating 100°F N/A D N/A N/A C

Plating Solutions, Tin-Lead Plating 100°F N/A D N/A N/A C

Plating Solutions, Zinc Plating: Acid Chloride 140°F N/A D N/A N/A D

Plating Solutions, Zinc Plating: Acid Fluoborate Bath R.T. N/A D N/A N/A C

Plating Solutions, Zinc Plating: Acid Sulfate Bath 150°F N/A D N/A N/A C

Plating Solutions, Zinc Plating: Alkaline Cyanide Bath R.T. N/A A N/A N/A A

Potash (Potassium Carbonate) B A N/A A B

Potassium Bicarbonate C A1 N/A A B

Potassium Bromide A A1 A1 N/A B

Potassium Chlorate B C1 A1 N/A B

Potassium Chloride A A1 A A A1

Potassium Chromate C B N/A N/A B1

Potassium Cyanide Solutions C A1 N/A N/A B1

Potassium Dichromate A B1 A1 N/A B1

Potassium Ferricyanide B1 B1 N/A N/A B1

Potassium Ferrocyanide N/A B1 N/A N/A B

Potassium Hydroxide (Caustic Potash) A C1 D A A1

Potassium Hypochlorite N/A B1 N/A N/A B

Potassium Iodide N/A A1 N/A N/A A1

Potassium Nitrate A B1 A1 A B

Potassium Oxalate N/A N/A N/A N/A B1

Potassium Permanganate A D A2 C B

Potassium Sulfate B A1 A1 N/A A

Potassium Sul"de N/A A N/A N/A B

Propane (lique"ed) A A1 C1 N/A A

Propylene N/A N/A N/A N/A A1

Propylene Glycol B A B1 N/A B

Pyridine B C1 D D A

Pyrogallic Acid D N/A N/A N/A B

Resorcinal N/A D B1 N/A N/A

Rosins B A1 N/A N/A A1

Rum A A N/A N/A A

Rust Inhibitors A N/A N/A N/A A

Salad Dressings A A N/A N/A A

Salicylic Acid D A1 A1 N/A B2

Salt Brine (NaCl saturated) N/A A A N/A A2

Sea Water A A2 A2 N/A C

Shellac (Bleached) A A1 N/A N/A A

Shellac (Orange) A A1 N/A N/A A

Silicone A A1 A2 N/A A

Silver Bromide C N/A N/A N/A D

Silver Nitrate A A1 A2 N/A B

Soap Solutions A A1 A1 A A1


CONTINUED




27


CHEMICAL

ACETAL/PO

M

NYLO

N

POLYCA

RBON

ATE

ACRYLIC

316SS

Soda Ash (see Sodium Carbonate) A B A A A

Sodium Acetate B B1 A1 N/A B1

Sodium Aluminate B A1 N/A N/A A

Sodium Benzoate N/A B1 A2 N/A N/A

Sodium Bicarbonate A A A2 N/A A1

Sodium Bisulfate B A1 A1 N/A C

Sodium Bisul"te C C1 A1 A B1

Sodium Borate (Borax) N/A A1 A1 N/A B

Sodium Bromide A B1 N/A N/A C

Sodium Carbonate A1 B1 B1 B A

Sodium Chlorate A D A1 A B1

Sodium Chloride A1 A1 A2 A B

Sodium Chromate D C A2 N/A B

Sodium Cyanide A A1 N/A N/A B1

Sodium Ferrocyanide A N/A N/A N/A B

Sodium Fluoride N/A B N/A N/A D

Sodium Hydrosul"te N/A A N/A N/A N/A

Sodium Hydroxide (20%) A A A2 N/A B2

Sodium Hydroxide (50%) A A B1 B B1

Sodium Hydroxide (80%) D C D N/A B1

Sodium Hypochlorite <20%) D D B B C

Sodium Hypochlorite (100%) D D N/A N/A D

Sodium Hyposulfate N/A N/A N/A N/A A

Sodium Metaphosphate B A1 N/A N/A A

Sodium Metasilicate D N/A N/A N/A A

Sodium Nitrate A A1 N/A N/A B1

Sodium Perborate B B1 N/A N/A B

Sodium Peroxide D A1 A2 N/A A

Sodium Polyphosphate B A1 N/A N/A B

Sodium Silicate C A1 N/A N/A B

Sodium Sulfate B A A2 A B1

Sodium Sul"de B A1 D N/A D

Sodium Sul"te N/A D N/A N/A A

Sodium Tetraborate B A N/A N/A A

Sodium Thiosulfate (hypo) C1 B D N/A B

Sorghum A A N/A N/A A

Soy Sauce A A N/A N/A A

Stannic Chloride C B1 A1 N/A D

Stannic Fluoborate C N/A N/A N/A A

Stannous Chloride N/A C1 N/A N/A A2

Starch A A1 N/A N/A A

Stearic Acid A A2 A1 B A

Stoddard Solvent A A A2 N/A A

Styrene A A1 D N/A A

Sugar (Liquids) A A1 N/A N/A A

Sulfate (Liquors) D B1 N/A N/A B

Sulfur Chloride D A1 N/A N/A D

Sulfur Dioxide B C1 A D A1

Sulfur Dioxide (dry) B B1 A1 D A

Sulfur Hexa#uoride N/A B N/A N/A N/A

Sulfur Trioxide N/A D N/A N/A C

Sulfur Trioxide (dry) D A1 N/A N/A A

Sulfuric Acid (<10%) D C1 A1 A B

Sulfuric Acid (10-75%) D D B1 C D

Sulfuric Acid (75-100%) N/A D B D D

Sulfuric Acid (cold concentrated) N/A D B D B

Sulfuric Acid (hot concentrated) N/A D D D C

Sulfurous Acid C D N/A D B

Sulfuryl Chloride A N/A N/A N/A N/A

Tallow A A1 N/A A A

Tannic Acid B C1 C A A

Tanning Liquors B A1 N/A N/A A2

Tartaric Acid B B2 A B C2

Tetrachloroethane A C1 N/A N/A A

Tetrachloroethylene A A1 D N/A A

CHEMICAL

ACETAL/PO

M

NYLO

N

POLYCA

RBON

ATE

ACRYLIC

316SS

Tetrahydrofuran A A D D A

Tin Salts N/A N/A N/A A D

Toluene (Toluol) C1 A1 D D A

Tomato Juice B A1 A1 N/A A

Trichloroacetic Acid N/A C C D C

Trichloroethane A C1 D D B

Trichloroethylene D C1 A D B

Trichloropropane A N/A N/A N/A A

Tricresylphosphate C A2 N/A A B

Triethylamine D A1 N/A A A

Trisodium Phosphate A A A B B

Turpentine A2 B D D A

Urea A A B A B

Uric Acid N/A A N/A N/A B

Urine A B N/A A A

Varnish A A N/A N/A A

Vegetable Juice A A N/A N/A A

Vinegar B A A2 A A

Vinyl Acetate N/A N/A N/A N/A B

Vinyl Chloride N/A A1 N/A N/A A1

Water, Acid, Mine A1 A B2 N/A B

Water, Deionized N/A A1 N/A N/A A2

Water, Distilled B A1 A2 N/A A

Water, Fresh A2 A1 A2 N/A A

Water, Salt A A2 A2 N/A B

Weed Killers A A N/A N/A A

Whey A N/A N/A N/A A

Whiskey & Wines A A1 A1 N/A A

White Liquor (Pulp Mill) D A1 N/A N/A A

White Water (Paper Mill) B A N/A N/A A

Xylene A A2 D D B

Zinc Chloride C A A2 A B

Zinc Hydrosul"te C A N/A N/A A

Zinc Sulfate C A A2 A A




28


NOTES

The Washdown ! xture is lightweight,

easy to install, and easy to clean.

It performs well in the harsh daily

washdown environment of our cut

" oor where it does not fail, dim or

show signs of water intrusion.

Paul Wright, Plant Engineer at Smith! eld Packing Company (subsidiary of Smith! eld Foods)

L U S I O ® WA S H D O W N S E R I E S v 1 . 1

lighting@! extronics.com • +1-913-851-3000

Flextronics is a leading end-to-end supply chain solutions company that delivers design, engineering, manufacturing and logistics services to a range of industries and end-markets, including data networking, telecom, enterprise computing and storage, industrial, capital equipment, appliances, automation, medical, automotive, aerospace and defense, energy, mobile, computing and other electronic product categories.

Flextronics is an industry leader that helps its customers design, build, ship, and service their products through an unparalleled network of facilities in more than 30 countries and across four continents. Flextronics Lighting Solutions is a business unit within the Flextronics Energy division.

Copyright © 2014, Flextronics. 09 14-1.


product guide - cm buck &...

Documents