pressure test skid, norsok 15,000 psi well pressurewith norsok regulations. pressure test skid,...
Post on 26-Mar-2018
Embed Size (px)
Performance Data & Specifications
High Volume Pumps - Each Pump Nominal Ratio 1:1.3 Minimum Output Pressure 0psi (0Bar) Maximum Output Pressure 1450psi (100Bar) Maximum Flow Rate @ 1,000psi (70Bar) 30lpm
High Pressure Pumps - Each Pump Nominal Ratio 10:7 Maximum Output Pressure 15,000psi (1034Bar) Minimum Flow Rate @10,000psi
Transfer Pump Max Pressure 100psi (7bar) 20lpm
Fluid Tank Construction 316 Stainless Steel Volume 1000 litres System Fluids Sea Water Drill Water MonoEthylene Glycol TriEthylene Glycol Ramex Methanol
Sensors Pressure 18,000psi (1241Bar) Flow 0-50lpm
Sound Level Maximum Sound Level (outside of unit)
(machine space doors closed, operating position doors open). 80dB(A) @ 1m
Mechanical Chart Recorder connection point
Design Temperature range -20oC to +40oC, the hydraulic oil and grease grades must be chosen to suit the local environmental conditions.
Waterproof container with stainless steel construction.
Power / External Supply
Electrical: 380V-690V 50-60Hz three phase 32A minimum supply connection 220-240V 50-60Hz single phase Automated multi voltage and phase correction
1 x main test 1 x QTS 1 x QTS open 1 x hand pump Automatic testing Chemical injection
This unit is a pressure test system intended for pressure testing 5K, 10K and 15K rated pressure control equipment to maximum workingpressure prior to performing intervention work. The unit is intended for use in ATEX Zone 1 hazardous environments and is in compliance with NORSOK regulations.
Pressure Test Skid, NORSOK15,000 psi Well Pressure
Dimensions & Weights
PART NUMBER L-6901027711(L) 200 cm, 79 in (W) 175 cm, 69 in (H) 196 cm, 77 in (Maximum Gross Weight) 4,500 kg, 9,921 lbs
The unit features a high volume circuit for rapid filling and a high pressurecircuit for raising to final pressure. Another identical pair of circuits provides 100% redundancy. Primary power is provided by an electrically driven hydraulic pump.Three modes of operation are provided; local manual control (stand alone) and passive safety systems, local manual control with electrical monitoring/recording and active safety systems enabled, and local manual operation with remote monitoring/recording and access to active safety systems. Unit features a local graphical interface displaying and recording pressure, flow and system parameters.
Three selectable pressure settings are provided on the unit to protect against over pressure during testing. These levels are set at 6.5K, 10K and 15K. These can be set by a three way valve for manual operations. The SmartMonitor will require the pressure setting to be set when starting the system.
The unit is mounted within a weather resistant container certified in accordance with DNV 2.7-1 and BS EN12079. All controls, reels and tanks are mounted inside the container behind secure lockable doors.
Pipe fittings, tubing and fasteners are made from stainless steel.
The pressure test skid will be designed using the following standards: Machinery Directive 2006/42/EC. CE Marked ATEX 95 (94/9/EC) NORSOK D-002 System Requirements Well
Intervention Equipment NORSOK Z-015 Temporary Equipment DNV 2.7-1:2006 Offshore Containers.
BS EN12079:2006 Offshore Containers and Associated Lifting Sets
Best Practice Dropped Object Management. Certification
CE marked, ATEX Approved for use in a Category 2 (Zone 1) hazardous area
Independently certified to DNV 2.7-1 NORSOK Approved
N E S S I E
2014 National Oilwell Varco www.nov.com/Elmar
Elmar Product Line