preliminary s18-286 technical specification€¦ · preliminary technical specification s18-286...
TRANSCRIPT
Preliminary
Technical Specification S18-286
ProductSFP28 (25G Enhanced Small Form
Pluggable Optical Transceiver)
Ver 000
Rev 002
Model WSP2X-LO3LC-IxB Page 1/17
LQP-730-5A www.vitextech.com A4(210x297)
I. Preview
Group SFP28 Project SFP28-ER lite Bi-Di
Model WSP2X-LO3LC-IxB
Spec. # 3.3V,LC/UPC Receptacle, PB: 19.0dB @ 25.78Gb/s, 30km Reach
# TX: EML LD, 25.78Gb/s, Output Power : 0.0 ~ 6.0 dBm, ER: min. 6.0dB
# RX: APD, 25.78Gb/s, Sensitivity < -19.0 dBm, Overload > -4.0 dBm
II. Contents
1. Features
2. Applications
3. Regulatory Compliance
4. Absolute Maximum Ratings
5. Operating Conditions
6. Optical Characteristics
7. Electrical Characteristics
8. Recommended Circuit Schematic
9. Pin Information
10. Serial Identification (EEPROM - A0h)
11. Digital Diagnostic Monitoring Function (EEPROM - A2h, Option)
12. 2-Wire Serial-Port Operation
13. Package Description & Outline Diagram
14. Label and S/N Description
15. Packing Information
15-1. Tray Dimension
15-2. Paper Bending
16. Ordering Information
III. Revision History
No. Date Items Changed recording Ver Rev Customer
1 2018.09.05 All Initial 000 000 standard
2 2019.03.08 8
10, 11 14
CDR Rate select logic condition A0h, A2h EEPROM Infomation Label Material
000 001 standard
3 2019.07.19 All Group : WSP2X -> SFP28 Project : ER lite -> SFP28-ER lite Bi-Di
000 002 standard
DESIGN CHECK CHECK CHECK APPROVAL
Preliminary
Technical Specification S18-286
ProductSFP28 (25G Enhanced Small Form
Pluggable Optical Transceiver)
Ver 000
Rev 002
Model WSP2X-LO3LC-IxB Page 2/17
LQP-730-5B www.vitextech.com A4(210x297)
1. Features
Up to 25.78Gb/s Optical Transceivers
LC/UPC Receptacle
EML Laser and APD Receiver
Compliant with SFF-8431,SFF-8432
Digital Diagnostic Monitoring compliant
Supports Serial ID functionality
Class 1 Laser Safety products
Single +3.3 V power supply with Hot-pluggable Interface
Low power consumption in the industrial temperature range
ROHS-6 compliant
2. Applications
Gigabit Ethernet : 25G Ethernet-ER
CPRI Line bit rate option 10
Digital repeater and Base station
3. Regulatory Compliance
Items Standard Performance
Electrostatic Discharge (ESD) IEC 61000-4-2 Class 1
Electromagnetic Interference (EMI) FCC Part 15 Class B Compliant with standards(FCC)
Electromagnetic Compatibility (EMC) Directive 89/336/EEC Compliant with standards(CE)
Laser Eye Safety FDA 21CFR 1040.10 and 1040.11
IEC 60825-1 Class I laser product.
RoHS Directive 2011/65/EU Compliant with RoHS
4. Absolute Maximum Ratings
Parameters Symbol Ratings Units Conditions
Storage Temperature Tstg -40 ~ +85 ℃ Ambient
Power Supply Voltage VCC < +4.0 V -
Ambient Humidity Hop 5 ~ 95 % w/o dew
Receiver Damage Threshold PRDMG 0.5 dBm -
Preliminary
Technical Specification S18-286
ProductSFP28 (25G Enhanced Small Form
Pluggable Optical Transceiver)
Ver 000
Rev 002
Model WSP2X-LO3LC-IxB Page 3/17
LQP-730-5B www.vitextech.com A4(210x297)
5. Operating conditions
Parameters Symbol Values
Conditions Min. Typ. Max. Units
Power supply voltage VCC +3.135 +3.300 +3.465 V -
Power supply current ICC - - 650 mA @3.3V
Power Supply Noise
Tolerance PSNT 66 - - mVp-p from 100Hz to 10MHz
Operating Case
Temperature Tc -40 - +85 ℃ Case, with Airflow
6. Optical Characteristics
Parameters Symbol Values
Conditions Min. Typ. Max. Units
Transmitter
Optical Transmit Power Pavg 0.0 - +6.0 dBm -
Transmitter Disable(Off) Power Poff - - -30.0 dBm @Tx_Disable is High
Peak Wavelength λp
1260.0 1270.0 1280.0 nm EML-LD,
WSP2X-LO3LC-IEB
1300.0 1310.0 1320.0 nm EML-LD,
WSP2X-LO3LC-IGB
Spectral Width - - 0.3 nm @-20 dB
Side Mode Suppression Ratio SMSR 30.0 - - dB -
RIN20OMA RIN - - -130.0 dB/Hz -
Extinction Ratio ER 6.0 - - dB PRBS231-1
Receiver
Optical Sensitivity @ 30km S
-19.0 dBm
PRBS2 31, BER5x10-5,
Source ER=6.0[dB]
BR: 25.78Gb/s
-19.0 dBm
PRBS2 31, BER1x10-12,
Source ER=6.0[dB]
BR: 10.3125Gb/s
CDR Bypass
Optical Overload OL -4.0 - - dBm -
Operating Wavelength λo
1300.0 1310.0 1320.0 nm WSP2X-LO3LC-IGB
1260.0 1270.0 1280.0 nm WSP2X-LO3LC-IEB
Rx_LOS
(Loss of signal)
Assert LOSA -34.0 - - dBm RX squelch activated
De-assert LOSD - - -24.0 dBm -
Preliminary
Technical Specification S18-286
ProductSFP28 (25G Enhanced Small Form
Pluggable Optical Transceiver)
Ver 000
Rev 002
Model WSP2X-LO3LC-IxB Page 4/17
LQP-730-5B www.vitextech.com A4(210x297)
Hysteresis LOSHYS 0.5 - 5.0 dB -
Return loss of receiver - -26.0 - - dB -
RSSI Calibration RCAL Internally Calibrated
(The host side can be read by an external way)
7. Electrical Characteristics
Parameters Symbol Values
Conditions Min. Typ. Max. Units
Transmitter
Data Rate DRT - 25.78 - Gb/s -
Differential Input Voltage VINpp 20 - 1100 mV AC Coupled
Differential Input Impedance ZIN 90 100 110 ohm -
Tx_Disable
Input_Low VIL -0.3 - 0.8 V LVTTL,Normal at Low,
High is Shutdown(Poff) Input_High VIH 2.0 - Vcc+0.3 V
Assert Time tOFF - - 100.0 us High
Negate Time tON - - 2.0 ms Low
Tx_Disable to start Reset treset 10.0 - - us High
Time to Initialize tInit - - 10.0 s Including reset of Tx_Fault
Tx_Fault Output_Low VFOL -0.3 - 0.4 V
LVTTL, Low is Normal
Output_High IFOH -50.0 - 37.5 uA
RS1 (Rate Select 1) VIL -0.3 - 0.8 V
Internally pull down
VIH 2.0 - Vcc+0.3 V
Receiver
Data Rate DRR - 25.78 - Gb/s -
Differential Output Voltage Vout 200 - 1100 mV AC Coupled
Differential Output
Impedance Zout 90 100 110 Ohm -
Rx_LOS
(Loss of signal)
Output_Low VLOSL -0.3 - 0.4 V LVTTL, Low is Normal
Output_High ILOSH -50.0 - 37.5 uA
Assert time tLOS-ON - - 100.0 us High@S
Deassert
time tLOS-OFF - - 100.0 us Low@S
RS0 (Rate Select 0) VIL -0.3 - 0.8 V
Internally pull down
VIH 2.0 - Vcc+0.3 V
Preliminary
Technical Specification S18-286
ProductSFP28 (25G Enhanced Small Form
Pluggable Optical Transceiver)
Ver 000
Rev 002
Model WSP2X-LO3LC-IxB Page 5/17
LQP-730-5B www.vitextech.com A4(210x297)
8. Recommended Circuit Schematic
Tx_Disable : Transmitter Disable, logic high, 4.7k to 10kohm pull up to Vcc on SFP+ Tx_Fault : Transmitter Fault, logic high, 4.7k to 10kohm pull up to Vcc on Host Rx_LOS : Receiver Loss of Signal, logic high, 4.7k to 10kohm pull up to Vcc on Host
Figure 1. Signal Definitions
Preliminary
Technical Specification S18-286
ProductSFP28 (25G Enhanced Small Form
Pluggable Optical Transceiver)
Ver 000
Rev 002
Model WSP2X-LO3LC-IxB Page 6/17
LQP-730-5B www.vitextech.com A4(210x297)
Figure 2. Example SFP(+) Host Board Schematic
Rx_
51 51
Preliminary
Technical Specification S18-286
ProductSFP28 (25G Enhanced Small Form
Pluggable Optical Transceiver)
Ver 000
Rev 002
Model WSP2X-LO3LC-IxB Page 7/17
LQP-730-5B www.vitextech.com A4(210x297)
9. Pin Information
Figure 3. 20-pin Connector
Pin No. Symbol Descriptions Sequence
Pin 1 TGND(VeeT) Ground 1
Pin 2 Tx_Fault Status Out 3
Pin 3 Tx_Disable Control In 3
Pin 4 SDA Input/Output(SDA, I2C data) 3
Pin 5 SCL Input/Output(SCL, I2C clock) 3
Pin 6 MOD_ABS Indicates that the module is present,
Grounded internally 3
Pin 7 RS0 Rate Select In 0, (Internally pull-down, 51kohm)1) 3
Pin 8 RX_LOS Status Out 3
Pin 9 RS1 Rate Select In 1, (Internally pull-down, 51kohm)1) 3
Pin10 RGND(VeeR) Ground 1
Pin 11 RGND(VeeR) Ground 1
Pin 12 Rx_Data bar Data Out Negative 3
Pin 13 Rx_Data Data Out Positive 3
Pin 14 RGND(VeeR) Ground 1
Pin 15 Rx_Vcc(VccR) Power 2
Pin 16 Tx_Vcc(VccT) Power 2
Pin 17 TGND(VeeT) Ground 1
Pin 18 Tx_Data Data In Positive 3
Pin 19 Tx_Data bar Data In Negative 3
Pin 20 TGND(VeeT) Ground 1
Preliminary
Technical Specification S18-286
ProductSFP28 (25G Enhanced Small Form
Pluggable Optical Transceiver)
Ver 000
Rev 002
Model WSP2X-LO3LC-IxB Page 8/17
LQP-730-5B www.vitextech.com A4(210x297)
Note1) CDR RATE SELECT LOGIC TABLE
Logic OR of RS0 pin and
RS0 bit
Logic OR of RS1 pin and
RS1 bit Receiver CDR Transmitter CDR
Low/0 Low/0 Bypass Bypass
Low/0 High/1 Bypass Lock at high bit rate
High/1 Low/0 Lock at high bit rate Bypass
High/1 High/1 Lock at high bit rate Lock at high bit rate
Preliminary
Technical Specification S18-286
ProductSFP28 (25G Enhanced Small Form
Pluggable Optical Transceiver)
Ver 000
Rev 002
Model WSP2X-LO3LC-IxB Page 9/17
LQP-730-5B www.vitextech.com A4(210x297)
10. Serial Identification (EEPROM - A0h)
★ Base ID Fields (Data Address 0 – 63)
Data Address Field Size
Name of Field Default values
Description of Field
0 1 Identifier 03h SFP / SFP+ / SFP2X
1 1 Ext. Identifier 04h SFP function is defined by serial ID only
2 1 Connector 07h LC connector
3 1 Transceiver (electronic or optical
compatibility)
00h –
4 1 00h –
5 –10 6 00-00-00-00-00-00h –
11 1 Encoding 03h NRZ
12 1 BR, nominal FFh 255×100Mbps = 25.5Gbps
13 1 Rate Identifier 0Eh Soft_Rate select implemented
14 1 Length (9㎛) 1Eh 30×1km=30km
15 1 Length (9㎛) FFh 255 x 100m = 25,500m
16-19 1 Length 00-00-00-00h –
20 – 35 16 Vendor Name (ASCII)
36 1 Transceiver 04h 25G Base ER
37 – 39 3 Vendor OUI 00-13-C5h OUI “00-13-C5”
40 – 55 16 Vendor PN W S P 2 X - L O 3 L C - I x B (ASCII)
56 – 59 4 Vendor Rev 30-30-30-30h 0000(ASCII)
60 – 61 2 Wavelength 04-F6h or 05-1Eh Tx wavelength(1270nm or 1310nm)
62 1 Reserved 00h –
63 1 CC_BASE Check code for Base ID Fields (address 0 to 62)
★ Extended ID Fields (Data Address 64 – 95)
64 – 65 2 Options 28-3AhPower Level 3, Retimer or CDR indicator. TX_DIS, TX_FLT, RX_LOS, RATE_SELECT functionality implemented
66 – 67 2 BR, max/min 67-00h Bit rate
68 – 83 16 Vendor SN Variable (ASCII)
84 – 91 8 Date Code Variable (YYMMDD) (ASCII)
92 1 Diagnostic type 68h Diagnostic monitoring implemented & Internally calibrated, Average power monitoring
93 1 Enhanced Options FAh
Optional enhanced features Alarm/warning flags implemented, TX_DISABLE,Rate_Select control and monitoring implemented, TX_FAULT, RX_LOS monitoring implemented Soft Rate_select
94 1 SFF-8472 Compliance 08h Rev 12.0 of SFF-8472
95 1 CC_EXT Check code for Extended ID Fields (address 64 to 94)
96-127 32 Vendor Specific Vendor Specific EEPROM
Preliminary
Technical Specification S18-286
ProductSFP28 (25G Enhanced Small Form
Pluggable Optical Transceiver)
Ver 000
Rev 002
Model WSP2X-LO3LC-IxB Page 10/17
LQP-730-5B www.vitextech.com A4(210x297)
11. Digital Diagnostic Monitoring Function (EEPROM – A2h)
Data
Address Size Name of Field Default Values
Data
Address Size Name of Field Default Values
★ Alarm and Warning Thresholds Hex. Dec. unit ★ External Calibration Option
0 – 1 2 Temp. High Alarm 6 4 - 0 0 100.0 ℃ 56 – 59 4 RX_PWR(4) 00-00-00-00h
2 – 3 2 Temp. Low Alarm C 9 - 0 0 -55.0 ℃ 60 – 63 4 RX_PWR(3) 00-00-00-00h
4 – 5 2 Temp. High Warning 5 A - 0 0 90.0 ℃ 64 – 67 4 RX_PWR(2) 00-00-00-00h
6 – 7 2 Temp. Low Warning D 3 - 0 0 -45.0 ℃ 68 – 71 4 RX_PWR(1) 3F-80-00-00h
8 – 9 2 Voltage High Alarm 8A- AC 3.55 V 72 – 75 4 RX_PWR(0) 00-00-00-00h
10 – 11 2 Voltage Low Alarm 7 4 - 0 4 2.97 V 76 – 77 2 TX_I(Slope) 01-00h
12 – 13 2 Voltage High Warning 8 7 - 8 C 3.47 V 78 – 79 2 TX_I(Offset) 00-00h
14 – 15 2 Voltage Low Warning 7 A- A8 3.14 V 80 – 81 2 TX_PWR(Slope) 01-00h
16 – 17 2 Bias High Alarm C 3 - 5 0 100.0 mA 82 – 83 2 TX_PWR(Offset) 00-00h
18 – 19 2 Bias Low Alarm 0 9 - C 4 5.0 mA 84 – 85 2 T(Slope) 01-00h
20 – 21 2 Bias High Warning AF - C 8 90.0 mA 86 – 87 2 T(Offset) 00-00h
22 – 23 2 Bias Low Warning 1 3 - 8 8 10.0 mA 88 – 89 2 V(Slope) 01-00h
24 – 25 2 TX Power High Alarm F 6 - 7 8 8.0 dBm 90 – 91 2 V(Offset) 00-00h
26 – 27 2 TX Power Low Alarm 0 F - 8 D -4.0 dBm 92 – 94 3 Reserved –
28 – 29 2 TX Power High Warning 9 B - 8 3 6.0 dBm 95 1 Checksum(address 0 to 94) –
30 – 31 2 TX Power Low Warning 1 8 - A 6 -2.0 dBm ★ A/D Values and Status Bits(Ref. page 11)
32 – 33 2 RX Power High Alarm 1 8 - A 6 -2.0 dBm 96 – 97 2 Measured Module Temp.2) Variable
34 – 35 2 RX Power Low Alarm 0 0 - 3 2 -23.0 dBm 98 – 99 2 Measured Supply Voltage Variable
36 – 37 2 RX Power High Warning 1 3 - 9 4 -3.0 dBm 100 – 101 2 Measured TX Bias Current Variable
38 – 39 2 RX Power Low Warning 0 0 - 4 F -21.0 dBm 102 – 103 2 Measured TX Output Power Variable
40 – 41 2 Laser T/ High Alarm 41-00 65.0 ℃ 104 – 105 2 Measured RX Input Power Variable
42 – 43 2 Laser T/ Low Alarm 2 3 - 0 0 35.0 ℃ 106 – 109 4 Reserved –
44 – 45 2 Laser T/ High Warning 3 C - 0 0 60.0 ℃ ★ Optional Status/Control Bits
46 – 47 2 Laser T/ Low Warning 2 8 - 0 0 40.0 ℃ 110 1 Optional Status and Control Variable
48 – 49 2 TEC Current High Alarm 1 B - 5 8 700 mA 111 1 Reserved –
50 – 51 2 TEC Current Low Alarm E 4 - A 8 -700 mA 112 – 113 2 Alarm Flag Variable
52 – 53 2 TEC Current High Warning 1 7 - 7 0 600 mA 114 1 Tx input equalization Variable
54 – 55 2 TEC Current Low Warning E 8 - 9 0 -600 mA 115 1 RX output emphasis Variable
– 118 – 119 2 Extended Control/Status Variable
– 120 – 127 8 Reserved –
120 – 127 8 Reserved –
Note2) Case temperature(Tc) of Module, see the figure 5 in section13. Depending on the external environment may be differ.
Preliminary
Technical Specification S18-286
ProductSFP28 (25G Enhanced Small Form
Pluggable Optical Transceiver)
Ver 000
Rev 002
Model WSP2X-LO3LC-IxB Page 11/17
LQP-730-5B www.vitextech.com A4(210x297)
Conversion of A/D Values (2 Wire Address A2h)
Data Addr-ess
Size (Byte)
Name of Field
Example Values
Accuracy Each Value
Conversion Value Calculation formula
(SFF-8472 / 16bit ADC) [Hex] [Hex] [Dec]
96 1 Temperature MSB 25
2566 9574
= Dec. / 256(@ >128) = 37.4 [℃],
= Dec. / 256-256(2's Complement @ <128),
(0.0039℃/Bit)
±3 ℃
97 1 Temperature LSB 66
98 1 Vcc MSB 80
804C 32844 = Dec. / 10000 = 3.28 [V],
(0.1mV/Bit) ±3 %
99 1 Vcc LSB 4C
100 1 TX Bias MSB 0E
0EB0 3760 = Dec. * 0.002 = 7.5 [mA],
(2uA/Bit) ±10 %
101 1 TX Bias LSB B0
102 1 TX Power MSB 13
1378 4984 = 10 Log(Dec*0.0001) = -3.0 [dBm],
(0.1uW/Bit) ±3 dB
103 1 TX Power LSB 78
104 1 RX Power MSB 00 64
0064 100 = 10 Log(Dec*0.0001) = -20 [dBm],
(0.1uW/Bit) ±3 dB
105 1 RX Power LSB
106 1 LD Temp MSB 32
3200 12800
= Dec. / 256(@ >128) = 50.0 [℃],
= Dec. / 256-256(2's Complement @ <128),
(0.0039℃/Bit)
±0.2 ℃
107 1 LD Temp LSB 00
108 1 TEC Current MSB 0E
0BB8 3760
= Dec. / 10 (@ >32768) = 376 [mA], = Dec. / 10-3276.8(2's Complement @ <3276.7),
(0.1mA/Bit)
±15 %
109 1 TEC Current LSB B0
Preliminary
Technical Specification S18-286
ProductSFP28 (25G Enhanced Small Form
Pluggable Optical Transceiver)
Ver 000
Rev 002
Model WSP2X-LO3LC-IxB Page 12/17
LQP-730-5B www.vitextech.com A4(210x297)
12. 2-Wire Serial-Port Operation
The 2-wire serial-port interface supports a bi-directional data transmission protocol with device addressing.
Connections to the bus are made through SCL and SDA. Timing diagrams for the 2-wire serial port can be found in
Figure 4. Within the bus specifications, a standard mode (100kHz clock rate) and a fast mode (400kHz clock rate) are
defined. The Module works in both modes.
The following bus protocol has been defined:Data transfer may be initiated only when the bus is not busy. During data transfer, the data line must remain stable
whenever the clock line is high. Changes in the data line while the clock line is high will be interpreted as control signals.
- Bus not busy: Both data and clock lines remain high.
- Start data transfer: A change in the state of the data line from high to low while the clock is high defines a START
condition.
- Stop data transfer: A change in the state of the data line from low to high while the clock line is high defines the STOP
condition.
- Data valid: The state of the data line represents valid data when, after a START condition, the data line is stable for
the duration of the high period of the clock signal. The data on the line can be changed during the low period of the clock
signal. There is one clock pulse per bit of data. Figure 4 detail how data transfer is accomplished on the 2-wire bus.
- Clock and Data Transitions: The SCL pin is normally pulled high with an external resistor or device. Data on the SCL
pin may only change during SDA -low time periods. Data changes during SDA -high periods will indicate a START or
STOP condition depending on the conditions discussed below.
- START Condition: A high-to-low transition of SCL with SDA high is a START condition that must precede any other
command. See the timing diagrams in Figure 4 for further details.
- STOP Condition: A low-to-high transition of SCL with SDA high is a STOP condition. After a read or write sequence,
the stop command places the condition into a low-power mode.
- Acknowledge: All address and data bytes are transmitted through a serial protocol. The Controller pulls the SCL line
low during the ninth clock pulse to acknowledge that it has received each word.
Figure 4. 2-Wire Data Transfer Protocol
Preliminary
Technical Specification S18-286
ProductSFP28 (25G Enhanced Small Form
Pluggable Optical Transceiver)
Ver 000
Rev 002
Model WSP2X-LO3LC-IxB Page 13/17
LQP-730-5B www.vitextech.com A4(210x297)
13. Package Description & Outline Diagram
* Unit: [mm]
Figure 5. Package outline diagram and example
Tc point
Bail
Product Label
Preliminary
Technical Specification S18-286
ProductSFP28 (25G Enhanced Small Form
Pluggable Optical Transceiver)
Ver 000
Rev 002
Model WSP2X-LO3LC-IxB Page 14/17
LQP-730-5B www.vitextech.com A4(210x297)
14. Label and S/N Description
Figure 6. Label description and example
Material: Silver P.E.T(Polyethylene), White Coating, Laminating
Size: 24.0(Width) x 11.4(Height) mm, Thickness: 0.07(t) mm
Barcode form: Code 128
Number of characters: 10 (fixed length)
Serial Number format :
S 19 22 001 01 ① ②③ ④⑤ ⑥⑦⑧ ⑨⑩
Digit Item Ex) Code Description
① Product type S SFP package
②③ Year 19 19 : 2019, 20 : 2020
④⑤ Week 22 -
⑥⑦⑧ Lot No. 0 0 1 -
⑨⑩ Serial No. 0 1 1 ~ 20
①~⑩ digits are stored in the EEPROM (A0h, Address 68 ~ 83)
Class 1 Laser Product
Model Name
Model Information
WSP2X-LO3LC-IEB
Serial Number LASER Class
Certificated Bar Code
Preliminary
Technical Specification S18-286
ProductSFP28 (25G Enhanced Small Form
Pluggable Optical Transceiver)
Ver 000
Rev 002
Model WSP2X-LO3LC-IxB Page 15/17
LQP-730-5B www.vitextech.com A4(210x297)
15. Packing Information
Array Tray Dimension (Option 10pcs are set on one tray)
*Unit:[mm]
Figure 7. Tray example
Preliminary
Technical Specification S18-286
ProductSFP28 (25G Enhanced Small Form
Pluggable Optical Transceiver)
Ver 000
Rev 002
Model WSP2X-LO3LC-IxB Page 16/17
LQP-730-5B www.vitextech.com A4(210x297)
Paper Bending (Paper width size : 30mm)
50 pcs Packing (5 step × 1 bundle)
Figure 8. [ 5 step 1 Bundle]
Preliminary
Technical Specification S18-286
ProductSFP28 (25G Enhanced Small Form
Pluggable Optical Transceiver)
Ver 000
Rev 002
Model WSP2X-LO3LC-IxB Page 17/17
LQP-730-5B www.vitextech.com A4(210x297)
16. Ordering Information
Model Descriptions Latch Color
WSP2X-LO3LC-IEB Tx 1270nm 1270nm EML LD, APD,
25.78125Gb/s, 30km Light
Purple
WSP2X-LO3LC-IGB Tx 1310nm 1310nm EML LD, APD,
25.78125Gb/s, 30km Yellow Green
*Part number information
W S P 2X - LO 3LC - I x B ① ② ③ ④ ⑤ ⑥
Items Code Descriptions
① Data rate 2X 25.78Gb/s
② Transmission Distance LO 30km SMF
③ Applied voltage & Connector type 3LC +3.3V, LC Receptacle
④ DDM & Operating temperature I With DDM, -40~ 85℃
⑤ Tx wavelength E
G
1270nm
1310nm
⑥ Customer code(Option) B APD
ContactVitex LLC
210 Sylvan Ave, Suite 25 Englewood Cliffs, NJ 07632
201-296-0145| [email protected]