plus+1 guide software plus+1 compliant s4 …plus+1 compliant s4 pveo pvg function block user manual...

CONNECTOR MATESWITH DEUTCHCONNECTOR #DTM-06-125A

PIN #1INDICATED

1

12

6

7

47.1 mm[1.85]

51.6 mm[2.03]

LED INDICATORLIGHTS

CONNECTOR MATESWITH DEUTCHCONNECTOR #DTM-06-125A

1

12

6

7

97.0 mm[3.82]

142.0 mm[5.59]

144.5 mm5.69

158.2 mm6.23

2x 25.2 mm[1.0]

2x 7.0[.28]MOUNTINGDIRECTION#2

COMPLI ANT

TM

PLUS+1™ GUIDE Software

PLUS+1 Compliant S4 PVEO Function Block User Manual


2 11009789 l Rev BA l November 2012

About this Manual

Organization and Headings

To help you quickly find information in this manual, the material is divided into sections, topics, subtopics, and details, with descriptive headings set in red type. Section titles appear at the top of every page in large red type.

In the PDF version of this document, clicking an item underlined in blue italic type jumps you to the referenced page in the document.

Special Text Formatting Controls and indicators are set in bold black type.

Table of Contents A Table of Contents (TOC) appears on the next page. In the PDF version of this document, the TOC entries are hyperlinked.

Revision History

Revision Date Comment

Rev BA November 2012

©2012 Sauer-Danfoss. All rights reserved.

Sauer-Danfoss accepts no responsibility for possible errors in catalogs, brochures and other printed material.

Sauer-Danfoss reserves the right to alter its products without prior notice. This also applies to products already

ordered provided that such alterations can be made without affecting agreed specifications.

All trademarks in this material are properties of their respective owners.

PLUS+1, GUIDE, and Sauer-Danfoss are trademarks of the Sauer-Danfoss Group. The PLUS+1 GUIDE, PLUS+1

Compliant, and Sauer-Danfoss logotypes are trademarks of the Sauer-Danfoss Group.


Contents

S4_PVEO Function Block ............................................................................................................................... 4 Overview .................................................................................................................................................... 4 Inputs ........................................................................................................................................................... 4 Outputs ....................................................................................................................................................... 5 Fault Logic ................................................................................................................................................. 6 About Function Block Connections .................................................................................................. 6 MC Controller—Output Configuration ............................................................................................ 7

How to Configure a MFOut .......................................................................................................... 7 How to Configure a DigOut ......................................................................................................... 8

SC Controller—Output Configuration ............................................................................................. 9 How to Configure a MFOut .......................................................................................................... 9 How to Configure a DigOut ....................................................................................................... 10

11009789 l Rev BA l November 2012 3

PLUS+1 Compliant S4 PVEO PVG Function Block User Manual

S4 PVEO Function Block

Overview This function block controls the output of a Sauer-Danfoss PVEO Series 4 Electrical Actuator.

The PVEO Actuator provides on/off control of Sauer-Danfoss PVG 32, PVG 100, and PVG 120 valves.

See About Function Block Connections on page 6 for more about this function block’s connections and signals.

Inputs

Function Block Inputs

Input Type Range Description

Enable BOOL —— Enables and disables Output A and Output B.

– T = Enables Output A and Output B.

– F = Disables Output A and Output B.

Fdbk A —— Input for the Status bus that reports the status of the output that is used by the function block’s Output A.

Each output has a Status bus (available through the Input bus) that reports on its status.

Fdbk B —— Input for the Status bus that reports on the status of the output that is used by the function block’s Output_B.

Each output has a Status bus (available through the Input bus) that reports on its status.

Input A BOOL Controls Output A.

– T = Turn on Output A.

– F = Turn off Output A.

Input B BOOL Controls Output B.

– T = Turn on Output B.

– F = Turn off Output B.


PLUS+1 Compliant S4 PVEO Function Block User Manual S4 PVEO Function Block

Outputs Function Block Outputs

Output Type Range Description

Fault U16 —— Reports function block faults.

This output uses the standard bitwise scheme described in the Basic Function Blocks Library User’s Manual.

Output A —— —— Controls the flow of hydraulic pressure to work port A on the PVEO Actuator.

– T = Flow from the pressure inlet to work port A.

– F = No flow from the pressure inlet to work port A.

Output B —— —— Controls the flow of hydraulic pressure to work port B on the PVEO Actuator.

– T = Flow from the pressure inlet to work port B.

– F = No flow from the pressure inlet to work port B.



Fault Logic The following table shows how:

• The Fault output indicates fault conditions.

• Fault conditions set both Output A and Output B to F.

Fault Logic

Condition Fault Output A Output B

Block is OK. 0x0000 T or F. T or F.

Output A or Output B is short circuited. 0x8008 F. F.

Both Input A and Input B are T. 0x8010 F. F.

Once a fault condition clears, both Input A and Input B must first return to F before Output A and Output B return to normal T/F operation.

About Function Block Connections

Function Block Connections

Item Description

1 Enables and disables Output A and Output B.

2 Inputs the status of the output that is used by Output A.

3 Inputs the status of the output that is used by Output B.

4 Controls Output A.

5 Controls Output B.

6 Outputs function block faults.

7 Turns on and off the flow of hydraulic pressure to work port A on the PVEO Actuator.

8 Turns on and off the flow of hydraulic pressure to work port B on the PVEO Actuator.



MC Controller—Output Configuration You route this function block’s Output A and Output B to a MFOut or a DigOut.

How to Configure a MFOut You must configure a MFOut to accept the signals from the function block’s Output A or Output B.

1. In the GUIDE template, enter the Outputs page.

2. Enter the MFOut that receives the function block’s Output A or Output B.

3. Make the changes that are shown in the preceding figure.



How to Configure a DigOut You must configure a DigOut to accept the signals from the function block’s Output A or Output B.


2. Enter the DigOut that receives the function block’s OutputA or Output B.




SC Controller—Output Configuration You route this function block’s Output A and Output B to a MFOut or a DigOut.

How to Configure a MFOut You must configure a MFOut to accept the signals from the function block’s Output A or Output B.


2. Enter the MFOut that receives the function block’s Output A or Output B.




How to Configure a DigOut You must configure a DigOut to accept the signals from the function block’s Output A or Output B.


2. Enter the DigOut that receives the function block’s Output A or Output B.




(This page is intentionally blank.)

Products we offer:

Bent Axis Motors

Closed Circuit Axial Piston Pumps and Motors

Displays

Electrohydraulic Power Steering

Electrohydraulics

Hydraulic Power Steering

Integrated Systems

Joysticks and Control Handles

Microcontrollers and Software

Open Circuit Axial Piston Pumps

Orbital Motors

PLUS+1™ GUIDE

Proportional Valves

Sensors

Steering

Transit Mixer Drives

Local address: Sauer-Danfoss Inc. 3500 Annapolis Lane North Minneapolis, MN 55447, USA Phone: +1 763 509-2000 Fax: +1 763 559-5769

Sauer-Danfoss (US) Company 2800 East 13th Street Ames, IA 50010, USA Phone: +1 515 239-6000 Fax: +1 515 239-6618

Sauer-Danfoss ApS DK-6430 Nordborg, Denmark Phone: +45 7488 4444 Fax: +45 7488 4400

Sauer-Danfoss GmbH & Co. OHG Postfach 2460, D-24531 Neumünster Krokamp 35, D-24539 Neumünster, Germany Phone: +49 4321 871-0 Fax: +49 4321 871 122

Sauer-Danfoss-Daikin LTD Shin-Osaka TERASAKI 3rd Bldg. 6F 1-5-28 Nishimiyahara, Yodogawa-ku Osaka 532-0004, Japan Phone: +81 6 6395 6066 Fax: +81 6 6395 8585

w w w . s a u e r - d a n f o s s . c o m11009789 l Rev BA l November 2012

Members of the Sauer-Danfoss Group:

Comatrol www.comatrol.com

Schwarzmüller-Inverter www.schwarzmueller-inverter.com

Turolla www.turollaocg.com

Hydro-Gear www.hydro-gear.com

Sauer-Danfoss-Daikin www.sauer-danfoss-daikin.com

Sauer-Danfoss is a global manufacturer and supplier of high-quality hydraulic and electronic components. We specialize in providing state-of-the-art technology and solutions that excel in the harsh operating conditions of the mobile off-highway market. Building on our extensive applications expertise, we work closely with our customers to ensure exceptional performance for a broad range of off-highway vehicles.

We help OEMs around the world speed up system development, reduce costs and bring vehicles to market faster. Sauer-Danfoss—Your Strongest Partner in Mobile Hydraulics.

Go to www.sauer-danfoss.com for further product information.

Wherever off-highway vehicles are at work, so is Sauer-Danfoss.

We offer expert worldwide support for our customers, ensuring the best possible solutions for outstanding performance. And with an extensive network of Global Service Partners, we also provide comprehensive global service for all of our components.

Please contact the Sauer-Danfoss representative nearest you.

plus+1 guide software plus+1 compliant s4 …plus+1 compliant s4 pveo pvg function block user manual...

Documents