phone and controller setup for ntrip

8/11/2019 Phone and Controller Setup for Ntrip

1/16

Connection setup for Trimble TSC2 Controller KYTCcell phone.

Network Connection setup for KYTC Samsung SLM cell phones

and the TSC2 controller

1. Make phone discoverable for controllerSamsung SLM

Select ptions in the lo!er right corner b" pressing on the #button on the top right of the number pad.

Scroll do!n to $luetooth and select %1& 'ctivation. (se the Selectoption %) button on top left of number pad& and toggle to *.Select Save b" using the # button on the top right of the numberpad.

Scroll do!n to %+& M" ,hone-s isibilit" and follo! the sameprocess as above to turn visibilit" to *.

/*ote0 the default name for the Samsung SLM is S'343 !hichcan be confusing if there are multiple SLMs in the vicinit" !hencreating a $luetooth partnership. 5 recommend creating a uni6uename for "our phone b" doing the follo!ing0Scroll do!n to %4& M" ,hone-s *ame and press the Select option.7nter a name to distinguish this phone from others and selectSave.

2. Create a *e! ,artnershipTurn on the controller and select Start8Settings

Select the Connections tab ) Select $luetooth and make sure thatthe Turn on $luetooth and Make 9evice 9iscoverable arechecked.

Select the 9evices tab ) Select *e! ,artnership0 the controller!ill scan and provide a list of $luetooth devices available.Select "our phone !hich !ill be indicated b" S'343.

*ote0 :hen not using $luetooth; disable on both the phone and thecontroller to save "our batteries.


2/16

Step 1. Setup a *e! Modem Connection

Turn on $luetooth on the cell phone and set to discoverable. Turn onthe data collector and select Start8Settings8$luetooth. Select >>>.

*e?t; select the


3/16

Select


4/16

7nter />>///1A in the number to dial @eld and select


5/16

Set the $aud rate0 to 11H2GG. 5n the


6/16


7/16

Step 2. Create a 9ial ,ro@le

5n Surve" Controller; click on Con@guration89ial pro@les and Select the*e! tab.

T"pe in a name for the pro@le. Select 5nternet rover as the ,ro@le t"pe.Select the connection name created in Step 1 from the drop do!nmenu under (se connection0 ) the $luetooth modem0 shouldautomaticall" populate !ith the cell phone 59. Select none from the',*0 dropdo!n menu. To connect to the KYCFS server enter

1H>.1>.1G.2N in the 5, 'ddress0 bo? and 21G1 in the 5, ,ort0 bo?. Clickon the O menu in the lo!er right corner.


8/16

Check the bo? under (se *TF5, and select ,FS from the Connectiont"pe0 dropdo!n menu. Click 7nter and save the pro@le.


9/16


10/16

Select Fover options. Set the Surve" t"pe0 to FTK. Select CMFJ fromthe $roadcast format0 dropdo!n menu and select 'n" from the (sestation inde?0 dropdo!n. Click on the P menu in the lo!er right cornerto continue.

Set Satellite diQerential0 to QR set 7levation mask0 to 1G and the,9, mask to .G. Click on the 2U4 menu in the lo!er right corner tocontinue.


11/16

The follo!ing settings are t"pical for KYTC. Select the FNUHNGGUS,S3N?5nternal or the FN Model 2US,SNN? 5nternal %depending on "our receivermodel& from the T"pe0 dropdo!n menu. Select $ottom of antennamount from the Measured to0 dropdo!n menu. 7nter .H for the'ntenna height0 and click on the right arro! button to select the (nits

!hich are surve" feet %sft&. Click on the +U4 menu in the lo!er rightcorner to continue.

Bor the HNGG receiver; make sure that (se L2e0 is set to Yes. Bor the FNalso check L2C. Bor the FN Model 2 !ith L*'SS or F !ith

L*'SS; also check the L*'SS bo?. Click 'ccept to save settings.


12/16

Select


13/16

*trip Connection for the TSC2

Set the t"pe of surve" and the broadcast format in the controller. 5n

this e?ample the broadcast format is set to CMFJ and the surve" t"peis FTK.Bor the selected format it is necessar" to select the receiving mediumfor the data. Bor *trip this !ill be done via 5nternet connection. 5t isimportant to set the correct 5,)address and the 5,),ort %KYCFS is1H>.1>.1G.2N; port 21G1&; the 5,)address links to the selected$roadcaster.


14/16


15/16

Trimble Surve" Controller makes the connection to the cell phone!hich then makes the internet connection. nce the connection isestablished the user can start the surve" b" selecting a prede@nedSurve" St"le.Selecting the Surve" St"le %e.g. KYCFS& automaticall" establishes the

connection to the de@ned broadcaster.

The user is presented !ith a full list of the available sources forreceiving correction data %mount points& !ithin the proVect area.

The user simpl" selects themost appropriate mount point.5n addition to the mountpoints the source list alsoprovides an identi@er%t"picall" the location of thereference station&; thestreamed correction dataformat details %e.g. CMFJ&and the t"pe of solution %e.g.single base&.


16/16

nce the mount point is selected the soft!are sends out a command toreceive correction data; a fe! seconds later the FTK),S Fover !illobtain a successful initialiation and is read" to commence surve"ing.

7?ample of a @?ed solution in Trimble Surve" Controller using the CFSstation KYT.

ther Cell ,hone Tips for Samsung SLMTo avoid having to authorie the blue tooth connection0Brom main menu select ptions then scroll do!n to $luetooth and

selectBrom there scroll do!n to M" 9evices and select "our controller. :iththe controller name highlighted; select options and then select number+ 'uthorie 9evice.

phone and controller setup for ntrip

Documents