performance work statement (pws) hardness surveillance … · performance work statement (pws)...

DEPARTMENT OF THE AIR FORCE

ICBM SYSTEMS DIRECTORATE (AFNWC) HILL AFB, UTAH 84056-5609

Performance Work Statement (PWS)

Hardness Surveillance EMP Program (HSEP)

Prepared by: 2d Lt R. Copeland Stubbs III

AFNWC/NIE

27 October 2015

TABLE OF CONTENTS SECTION 1 SCOPE AND PURPOSE PAGE 1 1.1 Scope and Purpose 1.2 General Background SECTION 2 DESCRIPTION OF SERVICES PAGE 1 2.1 Planning 2.2 Hardness Testing 2.3 Hardness Reporting 2.4 Compliance Documents SECTION 3 SERVICES DESCRIPTION SUMMARY PAGE 5 SECTION 4 GENERAL INFORMATION PAGE 6 4.1 Government Program Management 4.2 Site Selection 4.3 Validation Testing 4.4 Turnover Conferences 4.5 Site Acceptance 4.6 Site Deposture/Reposture 4.7 Field Team Support 4.8 Transportation 4.9 Material and Services 4.10 Problem Notification and Resolution 4.11 Packaging 4.12 Criticality of Mission 4.13 Contractor Manpower Reporting 4.14 Drug Testing Policy SECTION 5 SECURITY PAGE 10 5.1 Security Program Plan 5.2 Security Clearances 5.3 USAF Nuclear Weapons Personnel Reliability Program (PRP) 5.4 Two-Person Concept 5.5 Physical and Information Security Requirements 5.6 Classified Information SECTION 6 QUALITY PAGE 12 6.1 Inspection Program SECTION 7 SAFETY PAGE 12 7.1 System Safety 7.2 Safety Compliance Assessment Report 7.3 Safety Engineering Analysis 7.4 Nuclear Safety Support 7.5 Nuclear Safety Analysis 7.6 Nuclear Safety Certification 7.7 Nuclear Surety Training SECTION 8 SUPPLY SUPPORT SERVICES PAGE 14 8.1 Government Owned Facilities 8.2 Contractor Furnished Facilities

8.3 Government Furnished Property 8.4 Contractor Furnished Equipment 8.5 Government Furnished Material 8.6 Contractor Support Data 8.7 Spares Acquisition SECTION 9 TRANSITION PLAN PAGE 15 APPENDIX A ACRONYMS & ABBREVIATIONS LIST PAGE 16 APPENDIX B GOVERNMENT FURNISHED PROPERTY PAGE 18 APPENDIX C SAFETY, FIRE PROTECTION AND HEALTH SPECIFICATION PAGE 15

1

SECTION I: DESCRIPTION OF SERVICES

1 SCOPE AND PURPOSE

1.1 Scope The scope of the tasking in this Performance Work Statement (PWS) is the Electromagnetic Pulse (EMP) Hardness Evaluation of United States Air Force (USAF) Minuteman (MM) III Intercontinental Ballistic Missile (ICBM) Systems. This Hardness Surveillance EMP Program (HSEP) consists of hardness evaluation of Launch Facilities (LFs) and Missile Alert Facilities (MAFs) to determine the system hardness status and project future system hardness. Hardness evaluation of LFs and MAFs at each specified configuration will be completed on an annual basis. For planning purposes, testing shall be conducted in the following sequence. Basic F.E. Warren AFB, WY Option 1 Minot AFB, ND Option 2 Malmstrom AFB, MT Option 3 F.E. Warren AFB, WY Option 4 Minot AFB, ND

1.2 Purpose

The purpose of this PWS is to contract for engineering services and technical support necessary to provide hardness status and projection for the ICBM Weapon System. The HSEP will determine wing and system level hardness status and hardness degradation projections for the ICBM weapon systems. The goal of this service is to establish baseline hardness test data for (applicable) system changes/modification, to provide sufficient data and analysis to support hardness degradation projections and provide adequate lead time for either replacement or refurbishment, as applicable, of any weapon system element prior to failure or loss of safety margin.

2 DESCRIPTION OF SERVICES

The contractor shall develop and execute HSEP testing and reporting IAW applicable techincal guidance outlined in PWS Paragraph 2.4. The contractor shall determine EMP hardness and project with acceptable lead time (approximately five years) future hardness utilizing statistically quantifiable determination and projection methods. The goal of the hardness projection is to provide adequate lead time (approximately five years) for either replacement or refurbishment, as applicable, of any weapon system element prior to failure or loss of safety margin. The determination and projection methods shall produce results at the site level (LF and MAF), wing level (Wings I, III, V), and configuration level. The contractor shall plan, conduct and report hardness testing of nine (9) facilities as outlined below.

2.1 Planning

2.1.1 Program Management Plan (PMP).

The Contractor shall plan and coordinate the program tasks defined in this PWS. The contractor shall plan to test nine (9) facilities each calendar year. Facilities shall include seven (7) Launch Facilities (LFs) and two (2) Missile Alert Facilities (MAFs). Engineering liason and technical documentation shall be established and maintained by the contractor throughout the program. The contractor shall advise AFNWC/NIEI of management problems and shall generate and update the PMP upon Government approval of changes. The contractor shall direct, coordinate, evaluate, and control the program tasks defined in this PWS and as described and defined in the approved PMP (CDRL No. A005; DI-MGMT-81797).

2.1.1.1 Schedules

2

The contractor shall generate and comply with the approved Integrated Program Management Report (IMPR) (CDRL No. A001; DI-MGMT-81861/T).

2.1.1.2 Status Updates. The contractor shall support HSEP status updates and site test Quick Look Briefings at

the request of AFNWC Program Management (CDRL No. A009; DI-MGMT-80368A).

2.1.1.3 Meetings. The contractor shall participate in meetings in support of HSEP efforts at the request of AFNWC Program Management, to include meetings at USSTRATCOM and AFGSC.

2.1.2 Test Plans /Procedures

The contractor shall consider the integration and installation of all test equipment, and shall fully define how hardness testing is to be conducted. The contractor shall also include the entire site setup and checkout effort and define site-specific requirements in any plans for on-site testing at operational ICBM facilities. The contractor shall update as necessary, test plans and procedures (CDRL No. A011; DI-NDTI-80566A) (CDRL No. A012; DI-NDTI-80603A) (CDRL No. A013; DI-NDTI-80809)

2.1.3 Inspections Plans /Procedures

The contractor shall consider the integration and installation of all inspection equipment, and shall fully define the conduct of hardness inspections. The contractor shall also include the entire site setup and checkout effort and define site unique requirements in any plans for on-site inspections at operational ICBM facilities. The contractor shall update as necessary, the inspection plans and procedures. (CDRL No. A011; DI-NDTI-80566A) (CDRL No. A012; DI-NDTI-80603A) (CDRL No. A013; DI-NDTI-80809)

2.1.4 Wing Implementation Management Plan (IMP).

The contractor shall generate an Implementation Management Plan (IMP) governing test and field operations. The contractor shall coordinate this plan with the Program Manager. The contractor shall coordinate this plan with the appropriate AFGSC agencies through the Single Manager (Section 2.2.3.7) if field activities are proposed. This plan shall establish a method to accomplish the effort required by this program and shall address such topics as test site custodial responsibilities, site access (section 2.2.3.6), base support requirements and functional responsibilities . The IMP shall also cover:

a. integration and timing of all HSEP activities; b. transportation and setup of equipment; c. the contractor's planned completion of the site setup and testing and/or inspections; d. the development of all contract compliance and contractor inspection records and how the

contractor will ensure compliance with all procedures; and e. verification that all tests and/or inspections and checkouts have been completed. f. plans to identify any condition that could lead to damage to hardware during testing as well as

proposed method to avoid damage while still assessing hardness of site

If field activities are proposed, the contractor shall generate a Sequencing Plan as part of the IMP, describing the order of testing at each Wing considering the constraints listed below

a. The HSEP testing shall be conducted as a Category 2 effort as defined in AFI 21-202,

Volume 1, AFGSC Supplement (2 Feb 2011). b. The HSEP inspections shall be conducted as a Category 1 or 2 effort as defined in AFI

21-202, Volume 1, AFGSC Supplement (2 Feb 2011). c. The contractor shall revise engineering and planning, as required by the Procuring

Contracting Officer (PCO) approved contingency work.

2.1.5 Deviations and Waivers The contractor shall generate requests for deviations and waivers from approved program management or field activity plans when warranted by problems or discrepancies occurring during the activities required by this program. The contractor shall coordinate these activities with the Program Manager and

3

proceed as directed by the PCO. During field activities, the contractor shall also notify the Single Manager verbally of changes to field activity plans (CDRL No. A015, DI-CMAN-80640C).

2.2 Hardness Testing

2.2.1 The contractor shall perform EMP Hardness testing on nine (9) facilites to evaluate compliance with S-133-128D, and all other applicable technical guidance to include but not limited to items in PWS Paragraph 2.4. Facilities shall include seven (7) Launch Facilities (LFs) and two (2) Missile Alert Facilities (MAFs). Testing shall include High Altitude EMP (HEMP) simulation as well as Source Region EMP (SREMP) simulation to evaluate hardness. HEMP and SREMP testing shall be performed with system operating and in a manner as similar to operational function as reasonably achievable.

2.2.2 The contractor shall perform electromagnetic shielding effectiveness testing on one (1) LF and one (1) MAF per year. Contractor shall evaluate compliance with S-133-128D Paragraph 30.4.2.2 (Figures A-24 & A-25).

2.2.3 Field Activities

To accomplish field test/inspection activities, the contractor shall coordinate with Government agencies and shall provide the following elements where appropriate. IAW DFARS 211.106 – FAR 37.104, contractor personnel shall identify themselves as contractors, either by prominent display of badge/identification, declaration upon answering phone, or other self-identification as appropriate.

The contractor shall comply with the following provisions for assuming and maintaining control of ICBM basing sites.

2.2.3.1 Site Configuration Inspection

The contractor, in conjunction with Air Force Global Strike Command (AFGSC), shall perform pre-acceptance setup tasks IAW the test procedures (Section 2.1.2) or inspection procedures (Section 2.1.3) and verify existing equipment configurations against engineering and technical data prior to acceptance of each MAF or LF from the Government. Should discrepancies exist between this data and the actual configuration, the contractor shall notify the Program Manager and proceed as directed IAW Section 4.10 (CDRL No. A011; DI-NDTI-80566A) (CDRL No. A012; DI-NDTI-80603A) (CDRL No. A013; DI-NDTI-80809)

2.2.3.2 Weapon System Operational Checkout

The contractor shall perform a weapon system checkout (Class III Demonstration) to verify operation of the site/equipment IAW the test plans/procedures prior to HSEP testing. Should discrepancies be encountered, the contractor shall notify the Program Manager IAW Section 4.10 and proceed as directed IAW Section 4.10. (CDRL No. A011; DI-NDTI-80566A) (CDRL No. A012; DI-NDTI-80603A) (CDRL No. A013; DI-NDTI-80809)

2.2.3.3 Preparation for Return of Sites to the Government

The contractor shall perform a final weapon system checkout IAW the test plans/procedures to show conformance with the system requirements following HSEP testing. Should discrepancies exist between this data and the actual configuration, the contractor shall notify the Program Manager IAW Section 4.10 and proceed as directed IAW Section 4.10 (CDRL No. A011; DI-NDTI-80566A) (CDRL No. A012; DI-NDTI-80603A) (CDRL No. A013; DI-NDTI-80809)

The contractor shall, at the completion of the site work, return the facility to the condition existing upon entry IAW the DD Form 1149 and perform an inventory inspection in conjunction with AFGSC personnel.

4

2.2.3.4 Photographic Library The contractor shall photograph all problems/anomalies and deficiencies discovered on site and maintain a reproducible library of these photographs.

2.2.3.5 Site Security

The contractor shall be responsible for the installation and removal of the Joint Services Interior Intrusion Detection System (JSIIDS) or Maintenance and Security Alarm Monitor (MASAM), at both the test and monitoring facility, IAW the MASAM Installation and User's Manual (60683-K076-UT).

In the event of a JSIIDS/MASAM security alarm indicating a potential security violation at the test facility, security personnel at the monitoring facility will dispatch a response team to the test facility. Upon verification by the response team that the test facility has not been penetrated, the contractor shall be notified and shall respond by dispatching a two-person, PRP certified (IAW Section 5.3) team that shall provide security at the test facility until either MASAM security is reset (by the two-person team), or until the next contractor duty period. Costs associated with responses to JSIIDS/MASAM security alarms will be covered on the over and above line item. Because of the need to respond to JSIIDS/MASAM alarms during contractor non-duty periods, pre-authorization to charge to the over and above line item is not practical for this task. The contractor shall notify the Single Manager, AFNWC HSEP Manager, and Administrative Contracting Officer (ACO) of any costs associated with this task on the next contractor duty period.

2.2.3.6 Site Access

The contractor shall conform to all approved procedures for site access. This shall include ingress and egress procedures as described in the Site Access Instructions for the Hardness Surveillance EMP Program (60683-K478-UT) and procedures associated with using the JSIIDS/MASAM as described in the MASAM Operating Instructions (60683-K375-UT).

2.2.3.7 Single Manager Support

The Government has established at or near each Strategic Missile Wing (SMW) a Single Manager to interface with the contractor. The contractor shall establish a similar point of contact to interface with the Government and shall maintain status and schedule data for all Wing activity affected by this program.

2.3 Hardness Reporting

2.3.1 EMP Hardness Determination

The contractor shall perform the necessary tests, analyses, and/or inspections to determine the hardness of the ICBM system Operational Ground Equipment (OGE) and Real Property Installed Equipment (RPIE) relative to the Weapon System Specifications listed in Section 2.4. The determination shall be at the site level, at the wing level, and by site configuration and shall include a final report at the wing level and by site configuration. The contractor shall quantify the wing level statistical confidence of a hardness determination, normally based on a minimum number of seven (7) LF and two (2) MAF test sites.

2.3.2 EMP Hardness Projection

The contractor shall perform the necessary tests, analyses, and/or inspections to project the hardness of the ICBM system OGE and RPIE relative to the Weapon System Specifications listed in Section 2.4. The projection shall be at the site level, at the wing level, and by site configuration and shall include a final report at the wing level and by site configuration. The contractor shall quantify the wing level statistical confidence of the hardness projection, normally based on a minimum number of seven (7) LF and two (2) MAF test sites.

2.3.3 Identification of Anamolies and Deficiencies

Weapon system anomalies are those items that would adversely impact or impede the contractor’s program or schedule. Weapon system deficiencies are deviations from the weapon system specifications

5

which do not adversely impact or impede the contractors program or schedule. Upon identification in the HSEP of any significant (i.e., having the near-term potential for adversely affecting weapon system performance, reliability, hardness, or service life) anomalies, deficiencies, or changes in performance, the contractor shall identify potential system impacts and performance degradations (e.g., “Loss of command function”, “Loss of status reporting”, etc.) which could occur as a result of the identified anomaly or deficiency. The contractor shall identify possible cause(s) based on the work accomplished in identifying the anomalies or deficiencies and recommend a potential solution. The contractor shall promptly notify the Program Manager and Single Manager IAW Section 4.10 and proceed as directed IAW Section 4.10 (CDRL No. A010; DI-MGMT-81232). The contractor shall screen the anomalies, deficiencies, or changes in performance into the following categories:

a. No hardness impact; b. Minor hardness impact; c. Major hardness impact.

2.3.4 Wing Commander Briefings

The contractor shall prepare and present an In-Briefing and an Out-Briefing to the Wing Deputy Chief of Maintenance, and the Wing Commander and Staff prior to and following completion of all activities at the Wing. The contractor shall include test/inspection sites, test/inspection schedules, and an overview of the base support requirements in the In-Briefing. The contractor shall provide test results in the Wing Out-Briefings (CDRL No. A002; DI-ADMN-81249A) (CDRL No. A003; DI-MGMT-81605) (CDRL No. A004; DI-ADMN-81505).

2.4 Compliance Documents

The following documents of the exact issue listed state requirements with which the contractor shall comply. Documents called out for compliance within the following cited documents are incorporated by reference even if not listed here. Specific editions/revisions of documents will be listed here. Individual paragraph references will only identify basic documents. Weapon System Specifications

DOCUMENT

NO. DATE TITLE

S-133-128D 14 Jan 15 Weapon System Specification for Minuteman III (WS 133 A-M)

(Wings I, III, and V)

Appendices I and III of the Weapon System Specifications are classified SECRET and access to these documents is controlled. Security clearance at the SECRET level will be required to review these documents. Copies of these documents will be provided to the contractor upon request. Military and DOD Standards

DOCUMENT

NO. DATE TITLE

MIL-STD-882E 19 Jun 93 System Safety Program Requirements DoDI 1010.09 22 Jun 12 DoD Civilian Employee Drug-Free Workplace Program DoDR 5210.42 29 May 15 Nuclear Weapons Personnel Reliability Program (PRP) AFMAN 13-501 29 May 15 Nuclear Weapons Personnel Reliability Program (PRP)

Other Publications

6

DOCUMENT

NO. DATE TITLE

DOD 5210.41 AFMAN 38-108_AFSCSUP

21 Feb 14 Nuclear Weapon Security Manual

DOD 5220.22-M 17 Apr 14 National Industrial Security Program Operating Manual (NISPOM) AFI21-202 17 Sep 14 Missile Maintenance Management AFI91-203 19 Aug 14 Air Force Consolidated Occupational Safety Instruction AFI91-204 14 Apr 15 Safety Investigations and Reports AFI91-103 20 Oct 11 Air Force Nuclear Safety Design Certification Program AFMAN91-118 AFMAN91-119 AFI91-10 30 Jun 15 Air Force Nuclear Weapon Surety Program

Copies of Publications Copies of Military and Federal Specifications and Standards may be obtained from the Commanding Officer, Naval Publications and Forms Center, 5801 Tabor Ave., Philadelphia, PA, 19120. A request can be initiated by telephone, (215) 697-3321.

2.4.1 Contract Deliverables CDRL # TTILE DID # Paragraph Reference/s

A001 Integrated Program Management Report (IPMR) DI-MGMT-81861/T 2.1.1.1 A002 Conference Agenda (Meeting Agenda) DI-ADMN-81249A 2.3.4, 4.4 A003 Briefing Material DI-MGMT-81605 2.3.4, 4.4 A004 Report, Record of Meeting/Minutes DI-ADMN-81505 2.3.4, 4.4 A005 Program Management Plan DI-MGMT-81797 2.1.1 A006 Operations Security (OPSEC) Plan DI-MGMT-80934C 5.1 A007 Implementation Plan DI-MGMT-81737 4.7, 5.3.n A008 Transition Plan DI-MGMT-1945 9.3 A009 Status Report DI-MGMT-80368A 2.1.1.2 A010 System Problem Report (SPR) DI-MGMT-81232 2.3.3

A011 Test Plan DI-NDTI-80566A 2.1.2, 2.1.3, 2.2.3.1, 2.2.3.2, 2.2.3.3

A012 Test Procedures DI-NDTI-80603A 2.1.2, 2.1.3, 2.2.3.1, 2.2.3.2, 2.2.3.3

A013 Test/Inspection Report DI-NDTI-80809 2.1.2, 2.1.3, 2.2.3.1, 2.2.3.2, 2.2.3.3

A014 Deficiency Report (DR) DI-ALSS-81535 4.10 A015 Request for Deviations (RFD) DI-CMAN-80640C 2.1.5 A016 Funds and Labor Hour Expenditure Report DI-FNCL-81537 4.13 A017 Preservation & Packing Data DI-PACK-80120C/T 4.11 A018 System Safety Program Plan (SSPP) DI-SAFT-81626 7.1 A019 Nuclear Certification Impact Statement (NCIS) DI-NUOR-81888A 7.4 A020 Certification Requirements Plan (CRP) DI-NUOR-81409A 7.6 A021 Nuclear Safety Analysis Report (NSAR) DI-NUOR-81405A/T 7.5 A022 Accident/Incident Report DI-SAFT-81563 Appendix C A023 Training Materials (Nuclear Surety Training Materials) DI-ILSS-80872 7.7 A024 Status of Government Furnished Equipment (GFE) Report DI-MGMT-80269 8.3, 8.7

7

The Contractor shall submit an electronic copy to the inspection/acceptance point of contact and to all other offices that provide functional input to the inspector/acceptor; these offices are identified in the CDRL DD Form 1423-1, block 14.

3 SERVICES SUMMARY

Performance Parameter PWS paragraph

Performance Threshold

1. Quick Look Briefings 2.1.1.2 Quick Looks for 9 of 9 facility tests; delivered NLT two weeks of site return unless postponed by AFNWC/NIEI.

2. Comply with Testing Schedule 2.1.1 Testing on 9 of 9 facilities completed; On-schedule accept and return of sites for 8 of 9 facilities.

3. Timely CDRL Reporting 2.4.1 and DD Form 1423

95% of all reports are generated on time

4. Comply with PRP Program 5.3 100% compliance with AFMAN 13-501and established MOAs relating to PRP

4 GENERAL INFORMATION

4.1 Government Program Managment

4.1.1 Program Management Within the AFNWC the ICBM Systems Directorate (AFNWC/NI) has overall program management responsibility for ICBM Weapon Systems. Program management of the HSEP has been delegated to the HSEP Manager of the ICBM System Integration & Test Branch, AFNWC/NIEI.

4.1.2 Project Engineering The HSEP Project Engineer, AFNWC/NIEI, will provide the technical project management and is responsible for coordinating technical and engineering functions of the HSEP.

4.1.3 Contract Management Responsibility for contracting activities rests solely within the ICBM Contracting Division (AFNWC/PZB). No conversation, recommendation, or direction, whether given directly or implied by AFNWC personnel, that will affect the scope, schedule, or price of the program covered by this PWS, shall be acted upon by the contractor unless specifically directed in writing by the Procuring Contracting Officer (PCO). Efforts under the over and above line item must be reviewed and authorized by the Administrative Contracting Officer (ACO). Prior to submitting a request for over and above effort, the contractor shall obtain concurrence from the AFNWC HSEP Manager.

4.1.4 Single Manager The Government has established a Single Manager at or near each Strategic Missile Wing (SMW). The Single Manager's function is described in AFI 91-103.

4.2 Site Selection

AFNWC/NIEI will provide a list of proposed access sites for each wing to the contractor. The contractor shall review this list and either accept the designated sites or suggest alternative sites along with the rationale as to why the alternative sites were chosen. AFNWC/NIEI will review the contractor’s inputs and suggestions and designate which sites shall be accessed. The contractor shall plan to perform testing at only one ICBM site at a time. On occasion, at the discretion of the host Wing, the contractor may be asked to perform operations at two sites simultaneously. Site Unavailability

8

Due to changes in Wing activities the host Wing may prefer that the scheduled facility not be tested. In such situations the Wing shall propose a comparable facility to test in its stead, which change shall be approved by AFNWC/NIEI and coordinated with the contractor. Some sites may not be testable IAW the testing procedures proposed by the contractor. If deemed necessary, the contractor may conduct site surveys as part of this effort. All site surveys shall be conducted on a non-interference basis to the visited site. All requests for site surveys shall be submitted with full justification of need to AFNWC/NIEI through the PCO at least 45 calendar days in advance of visit. The Government reserves the right to deny any site survey request that is not deemed fully justified.

4.3 Validation Testing AFNWC/NI may direct the contractor to perform validation (hardness assurance) EMP testing for new systems/equipment in lieu of normal HSEP testing. Such testing is not covered under the over and above line item; however, reasonable and unforeseen expenses associated with the validation testing that would not have been necessary under normal testing conditions may be covered by the over and above line item.

4.4 Turnover Conferences

The contractor shall support a site turnover conference for each facility. AFNWC/Single Manger will prepare and submit a DD Form 1149 to the appropriate agencies to affect site acceptance from AFGSC to AFNWC/Single Manager. AFNWC/Single Manager will then notify the contractor that the site is available to conduct contractor tasks. AFNWC/Single Manager will delegate overall control and responsibility of the site to the contractor. Upon completion of contractor activities at a site and following a successful site reposture, AFGSC will accept the site from AFNWC/Single Manager via the DD Form 1149 (CDRL No. A002; DI-ADMN-81249A) (CDRL No. A003; DI-MGMT-81605) (CDRL No. A004; DI-ADMN-81505).

4.5 Site Acceptance

Following site configuration inspection (section 2.2.3.1) and the Turnover Conference, the contractor shall accept the site from AFNWC/Single Manager.

4.6 Site Deposture/Reposture

If field activities require site deposture/reposture, the contractor shall update as necessary, the site deposture and reposture procedures (CDRL No. A012).

4.7 Field Team Support

The contractor shall provide support to his field teams except for those goods and services provided through the Implementation Management Plan (CDRL No. A007; DI-MGMT-81737).

4.8 Transportation

The contractor shall supply all required vehicles and transportation/handling equipment which are not listed in Appendix B of the contract to accomplish the tasks of this PWS. The contractor shall be responsible for transportation and delivery of all hardware, including GFP. The Government will support transportation and delivery of hardware when in the best interest of the Government.

4.9 Material and Services

The contractor shall provide all necessary materials and services to perform the EMP hardness activities necessary to complete the requirements identified in this PWS. Government Furnished Property (GFP) and drawings will be provided to the contractor IAW the GFP clause of the contract. In support of the field effort, the contractor shall provide, as necessary, the following:

a. Management and Program Control b. Security c. Configuration Control and Management

9

d. Warehousing and Transportation e. Engineering Liaison f. Industrial Safety

Unless awarded a follow-on contract, the contractor shall transfer title of all Special Tooling and Special Test Equipment purchased or manufactured for this contract to the Government upon completion of this contract. The contractor shall request disposition instructions for the Special Tooling and Special Test Equipment from the PCO.

4.10 Problem Notification and Resolution

Problem Notification Report The contractor shall promptly notify the Program Manager and Single Manager verbally of any weapon system anomalies or deficiencies (as defined in section 2.3.3) encountered during setup, checkout, and testing and proceed as directed by the ACO. The contractor shall prepare a Problem/Anomaly Report identifying the weapon system anomaly encountered and suggest potential corrective action. The contractor shall prepare a Deficiency Report describing all deficiencies encountered (CDRL No. A014; DI-ALSS-81535)

Costs associated with these tasks are not included in the over and above line item.

Problem Resolution Problem resolution will be handled on a case by case basis. The contractor shall coordinate with the Government on the review and analysis of problem areas and proposed changes, determination of impact on facilities, equipment, and security, and correlation of such impact with other changes. Some problems will be resolved by the Government while others may be assigned to the contractor for resolution. Such direction will be given by the ACO. Resolution of the problem(s) shall be made by the contractor as directed by AFNWC/NIEI through the ACO. The contractor shall submit a work request to the Program Manager for each problem resolution. Each work request must be approved by the Program Manager and the ACO prior to performance of any work. Cumulative problem resolution costs in excess of $1,000.00 per site will be authorized on the over and above line item. The ACO will assure that sufficient funds are obligated prior to authorization of any work.

The resolution of some problems or anomalies may require additional on-site activities. The direction to conduct such activities will be given by the ACO. Cumulative activities to resolve problems or anomalies shall not impact the overall program schedule. The contractor shall submit a work request to the Program Manager for each activity related to problem or anomaly resolution. Each work request must be approved by the Program Manager and the ACO prior to the performance of any work. The cumulative problem or anomaly resolution will be authorized on the over and above line item. The ACO will assure that sufficient funds are obligated prior to authorization of any work.

4.11 Packaging

Preservation for Packaging Unless otherwise specified in this contract, the preservation and packaging for storage and shipment of HSEP elements (including GFP) shall be in accordance with good commercial practices.

Packing Unless otherwise specified in this contract, the packing of HSEP elements (including GFP) shall be in accordance with good commercial practices to ensure acceptance by common carriers.

Marking Unless otherwise specified in this contract, the marking of unit packages, intermediate packages, and shipping containers shall be in accordance with good commercial practices for shipment by common carriers. (CDRL No. A017; DI-PACK-80120C/T)

10

4.12 Criticality of Mission

In order for ICBMs to be a credible tool of nuclear deterrence, it must be determined that they are survivable. HSEP testing is one of the only metrics curently in use to measure survivability. As long as strategic nuclear deterrence is a concern for national strategy, the HSEP will be mission-essential.

4.13 Contractor Manpower Reporting

The contractor shall report ALL contractor labor hours (including subcontractor labor hours) required for performance of services provided under this contract for the Air Force via a secure data collection site. The contractor is required to completely fill in all required data fields at http://www.ecmra.mil. Reporting inputs will be for the labor executed during the period of performance for each Government fiscal year (FY), which runs 1 October through 30 September. While inputs may be reported any time during the FY, all data shall be reported no later than 31 October* of each calendar year. Contractors may direct questions to the CMRA help desk. Contractors are required to input data by 31 October of each year. However, due to the delayed implementation, input of FY17 data is required by 31 Mar 18. Information from the secure web site is considered to be proprietary in nature when the contract number and contractor identity are associated with the direct labor hours and direct labor dollars. At no time will any data be released to the public with the contractor name and contract number associated with the data. Data for Air Force service requirements must be input at the Air Force CMRA link. However, user manuals for government personnel and contractors are available at the Army CMRA link at http://www.ecmra.mil. (CDRL No. A016; DI-FNCL-81537)

4.14 Drug Testing Policy Per DoDR 5210.42/AFMAN 13-501 Paragraph C2.8.4, ensure that employees to be assigned to a PRP position are subjected to a PSI, medical record evaluation, substance abuse testing, personal interview, proficiency certification, and continuing evaluation according to the certifying official, under the reliability standards of the PRP. Contractor personnel assigned to designated NC2 PRP positions shall be subject to random CSP testing. (Added)(AF) Contractor personnel shall ensure all dental/medical and pharmacy information is made available to the CMA. Per DoDR 5210.42/AFMAN 13-501 Paragraph C4.4.4 and C4.4.4.1, Because of the danger to public health and safety or to U.S. national security that might result from the failure of an individual performing PRP duties to perform reliably, mandatory substance abuse testing of all military, civilian, and contractor personnel assigned to PRP duties shall be conducted according to DoD Directives 1010.1 and 1010.9. (Added)(AF) Drug abuse testing for military and civilian personnel assigned to specially designated Nuclear Command and Control PRP positions identified in Table AP1.T1. (subsequent to 25 May 93) shall be administered before the individuals assume those duties. The AF Civilian Drug Testing Plan specifies that all Air Force civilian PRP positions are “Testing Designated Positions,” and as such, PRP employees are subject to random testing. These positions must be formally identified and designated on each position description and vacancy announcement. Drug testing for contractor personnel will be in accordance with the contract and will be equivalent to the AF Civilian Drug Testing Plan.

Per DoDI 1010.09 Enclosure 4 Paragraph 3, any DoD Component, agency, or organization implementing a certified DFWP must assign a drug program coordinator to carry out the drug-free workplace program, to serve as the principal contact with the laboratory, and to ensure compliance with Reference (e) and the requirements of this Instruction in collection activities. Contractor personnel will use off base facilities to complete the drug testing requirements. On base facilities are not authorized for contractor use.

5 SECURITY REQUIREMENTS

5.1 Security Program Plan

http://www.ecmra.mil/

http://www.ecmra.mil/

11

The contractor shall update as necessary the Security Program Plan (SPP) for conducting the HSEP (CDRL No. A006; DI-MGMT-80934C).

5.2 Security Clearances

The contractor shall ensure that all personnel who participate in the HSEP hold sufficient levels of security clearances to accomplish the requirements of this PWS. Minimum clearance required for all field activity personnel is SECRET.

5.3 USAF Nuclear Weapons Personnel Reliability Program

The contractor shall conduct a Nuclear Weapons Personnel Reliability Program (PRP) based on requirements in DoD 5210.42R_AFMAN 13-501, Incorporating IC1, 10 Sep 08, Nuclear Weapons Personnel Reliability Program (AFMAN 13-501). IAW AFMAN 13-501, the contractor is directed to provide a contract Competent Medical Authority (CMA) to perform all health-related PRP recommendations and evaluations to the Certifying Official on contract employees IAW established MOA/MOU as applicable, the contractor may be allowed to utilize the Military Treatment Facility as CMA. If the contractor chooses to subcontract activities requiring PRP certification, it is the contractor’s responsibility to ensure that the subcontractor meets, implements, and adheres to all requirements and provisions of the PRP. Failure of the contractor or its subcontractor to fully comply with the PRP requirements and provisions may result in contract termination. The contractor shall conduct the PRP in a manner compatible with AFMAN 13-501, as applicable. The contractor shall provide personnel who shall be qualified for critical access to implement the requirements of the USAF Two-Person Concept. The contractor shall ensure that personnel required for Two-Person Concept teams are PRP certified IAW the requirements of AFMAN 13-501. The contractor shall notify the Single Manager, the Program Manager, the AFNWC/NIEI and/or Host Wing PRP monitor, and the AFNWC/NI and/or Host Wing Certification Official of any potential compromise and then proceed as directed by the ACO. The contractor shall ensure that all personnel performing duties that are of a critical or controlled (PRP certified) position as defined under AFMAN 13-501meet the reliability standards of PRP. Not all employees are required to have PRP certification. However, the contractor shall certify enough personnel to insure that the HSEP meets the requirements of the PRP and threat changes in the status of personnel PRP certification do not impact the HSEP schedule. In addition, the contractor shall:

a. Instruct managerial, supervisory, medical, and other personnel as that the assignment is subject to the standards and procedures of the PRP.

b. Make sure personnel assigned, or to be assigned, to a PRP position are medically examined and evaluated as required, and receive an OS-10 physical profile from a DOD medical authority.

c. Make sure personnel assigned, or to be assigned, to PRP positions meet the security investigative requirements of AFMAN 13-501.

d. Requests for investigations must reach the Defense Investigative Service (DIS) in enough time to allow the investigation to be conducted for the PRP position required. Interim certification is authorized for contractor personnel; however, only one interim-certified person can be used to form a TPC team.

e. Provide for day-to-day observation by contractor supervisory personnel of personnel assigned to PRP positions.

f. Provide to the certifying official results of a medical evaluation of any personnel assigned, or to be assigned, to a PRP position, and an immediate report of any other data or information concerning such personnel that is relevant to standards for assignment under the PRP.

g. Assign to PRP positions only those personnel whom the certifying official has determined to be eligible under the standards of the PRP.

h. Temporarily remove personnel from assignment to the duties of a PRP position immediately on notice of data or information that is, or appears to be, reason for decertification for such assignment under the standards of the PRP.

i. Notify the certifying official immediately of such temporary removal of personnel and of the reasons therefore.

12

j. Notify appropriate activities so that entry authority and access lists may be updated to bar decertified personnel from assuming or conducting PRP responsibilities.

k. Immediately remove personnel from a PRP position on notification by the certifying official that the person has been temporarily decertified.

l. On notice by the certifying official of permanent decertification, advise the person of the right to submit information on his or her behalf for use by the reviewing official.

m. When notified by the reviewing official that the person has been determined to be unacceptable for failure to meet reliability standards and has been permanently decertified, the contractor shall reassign the person to non-PRP tasks.

n. Update the PRP Implementation Plan whenever permanent changes occur in PRP certified positions or personnel (CDRL No. A007; DI-MGMT-81737).

o. Apply the PRP to any subcontractors holding PRP positions. p. Arrange for all candidates, including any subcontractor personnel, for PRP positions to travel to

HAFB and/or Host Wing for PRP training and interviews. q. The AFNWC/NI and/or Host Wing Certifying Official will act as the Certifying Official for the

HSEP Contractor Personnel as long as the personnel are in the Utah area. When the Contractor Personnel transfer to a Wing to perform tasks identified in this PWS, the PCO or ACO will identify a new Certifying Official, if required, by letter prior to transfer.

r. Ensure that only United States citizens are identified for PRP positions. s. Ensure that no individuals who have previously been permanently decertified, whether as a

military member, DOD civilian, or contractor performing PRP duties, are identified for PRP duty.

t. Ensure that the contractor security officer is knowledgeable of all PRP requirements. u. Ensure that no punitive measures are taken against an employee as a result of their certification

status.

5.4 Two-Person Concept Control The contractor shall provide personnel who shall be qualified for critical access to implement the requirements of the Two-Person Concept based on AFI 91-104. The contractor shall ensure that personnel included in Two-Person Concept teams are PRP certified IAW the requirements of AFMAN 13-501. The contractor shall notify the Program Manager, the AFNWC/NI and/or Host Wing Nuclear Surety Monitor, PRP monitor, and the Certification Official of any potential compromise, involving Two-Person Concept team; and then proceed as directed by the PCO.

5.5 Physical and Information Security Recuirements

The contractor shall comply with the requirements of the Department of Defense (DOD) National Industrial Security Program Operating Manual (DOD 5220.22-M) unless contractually modified. The contractor shall control access to the facilities occupied by the contractor. Access to keys and combinations used to secure Government property and classified material shall be limited to authorized persons. The contractor shall maintain an account with the Defense Courier Service, and use it for all Top Secret transmittals.

5.6 Classified Information This contract requires that the contractor have access to classified information. The Federal Acquisition Regulation (FAR) requires that a DD Form 254 be incorporated in each classified contract. The DD Form 254 provides to the contractor the security requirements and the classification guidance that would be necessary to perform on a classified contract.

6 QUALITY REQUIREMENTS

6.1 Inspection Program

13

The contractor shall establish and implement an inspection system that meets the requirements specified in the general provisions of the contract. This program shall also apply to all subcontractors. The contractor shall ensure that all test equipment is properly calibrated and functioning prior to test execution.

7 SAFETY REQUIREMENTS

7.1 System Safety

Safety features shall preclude or limit hazards to personnel and equipment IAW MIL-STD 882E.

System Safety Program. The contractor shall implement a System Safety Program IAW MIL-STD 882E Task 101. Program provisions shall apply to all subcontractors as well. Status and progress shall be reported at TIMs, design reviews, and program review meetings. This status and progress shall include identification and discussion on all newly recognized significant hazards and hazard control status. The contractor shall review all testing/inspection efforts and development of test plans/procedures accomplished under this contract for system safety implications. The contractor shall ensure compliance with safety engineering principles and weapon system safety criteria IAW MIL-STD-882E. The contractor shall analyze development of plans and procedures for testing activities on a continuing basis to ensure that any potential safety deficiency/hazard is detected, evaluated and resolved. The contractor shall advise AFNWC/NI System Safety Office of safety issues/concerns involving repair or test programs. The contractor shall notify the AFNWC/NI System Safety Office by telephone followed by a written notification of hazardous conditions or safety implications identified or on determination that the criteria and requirements of MIL-STD 882E have not been satisfied. (CDRL No. A018; DI-SAFT-81626)

7.2 Safety Compliance Assessment Report

The contractor shall update as necessary the Safety Compliance Assessment Report (SCAR) IAW MIL-STD-882E, Task 402, for the development and testing of the HSEP and the development of procedures, for the testing, operation, and maintenance for this effort (CDRL No. A013).

7.3 Safety Engineering Analysis

The contractor shall update as necessary the Safety Engineering Analyses (SEAs) to support the HSEP based upon the requirements of AFI 21-202 and MIL-STD-882E.

7.4 Nuclear Safety Support

The contractor shall provide support to AFNWC/NI System Safety Office for Nuclear Surety Impact Statement (NSIS) development based upon requirements found in AFI 91-103, Attachment 2, paragraph A2.3. The contractor shall provide technical support to the Nuclear Surety Working Group (NSWG). The NSWG meetings will be held approximately three times per year. Also, the contractor shall be prepared to discuss nuclear safety issues at all other meeting required by this effort. (CDRL No. A019; DI-NUOR-81888A).

7.5 Nuclear Safety Analysis

The contractor shall update as necessary, the Nuclear Safety Analysis Report (NSAR) on the HSEP program. The analysis shall address the HSEP PRP program, configuration and control of HSEP equipment and procedures, LF and MAF intrusion detection systems, site deposture, site preparation, HSEP testing site checkout, and reposture phases of the HSEP. The contractor shall generate a NSAR which addresses, but will not be limited to the following (CDRL No. A021; DI-NUOR-81405A/T) (CDRL No. A022; DI-SAFT-81563):

a. MAF/LF isolation b. Re-entry System (RS) removal/replacement c. Emplacement and use of RS simulator d. Removal/replacement/control of operational codes and critical components e. LF/Missile safing f. Ordnance removal/safing g. All HSEP test activities

14

h. Interface and use of test equipment and overlay software i. LF/MAF Security and No Lone Zones IAW AFI 91-104 and AFI 91-105, paragraph 9 j. Refurbishment and checkout of damaged equipment k. Checkout/recertification of nuclear safety critical components l. Post-test checkout of LF/MAF m. MAF/LF de-isolation n. Weapon System Verification testing o. Design and use of overlay tapes p. Design and operation of new test equipment IAW AFI 91-107 paragraph 2.2 q. Summary of testing r. Configuration control of HSEP equipment and procedures.

7.6 Nuclear Safety Certification

If the contractor plans to perform field or laboratory tests/inspections involving nuclear certified items, the HSEP will require a Nuclear Safety Certification by the Government. The certification effort will be completed approximately 180 calendar days following receipt of the draft NSAR. The contractor shall take this delay into account for scheduling purposes. (CDRL No. A020; DI-NUOR-81409A)

7.7 Nuclear Surety Training

The contractor shall update, as necessary, the nuclear surety training program and materials. The contractor shall conduct training for all individuals who will be PRP certified after the program and materials have been approved by the Government, but prior to PRP certification. Guidelines for training are found in AFI 91-101, paragraph 2.1.5. (CDRL No. A023; DI-ILSS-80872)

8 SUPPLY SUPPORT REQUIREMENTS

8.1 Government Owned Facilities

The contractor will be allowed access to appropriate locations at Government facilities. Access to these facilities is not unlimited; therefore, the contractor shall coordinate the times and dates with AFNWC/NIEI through the ACO at least 90 calendar days prior to need. Control of the facilities will remain with the Government. Following use for contractor conducted activities, the contractor shall restore the Government facility to the original configuration.

8.2 Contractor Furnished Facilities

The contractor shall provide any office, laboratory, warehouse, or support facilities required to accomplish the tasks in this PWS. The contractor may negotiate facilities at ICBM SMWs through the Base Support Agreement. The contractor shall furnish and install office and shop equipment, reproduction equipment, test equipment etc. necessary to support this contract in facilities operated by the contractor.

8.3 Government Furnished Property

The Government property listed in Appendix B is available for the contractor to use as Government Furnished Property (GFP). The contractor shall package and ship GFP as required to support its use at all locations according to approved plans and schedules. The contractor shall plan and conduct maintenance and operations of the GFP in such a way as to minimize wear and tear on the equipment. The contractor shall repair GFP as required to maintain functionality (CDRL No. A024; DI-MGMT-80269)

Modification of GFP The contractor shall plan and perform any modification the GFP may require to make it usable according to the contractor's technical approach. Costs associated with this task shall be included in the firm fixed price line item.

8.4 Contractor Furnished Equipment The contractor shall furnish all equipment required to perform HSEP testing which is not outlined in Appendix B, to include High altitude burst pulser.

15

8.5 Contractor Support Data The contractor is authorized access to Air Force data as applicable and available to support the efforts required by this program. Assistance in obtaining data may be obtained from AFNWC/NIEI through the PCO.

8.6 Spares Acquisition

The contractor shall identify equipment (including GFP) parts and components which (CDRL No. A024; DI-MGMT-80269):

a. will need frequent replacement, or b. will result in a possible program delay for procurement of replacements. The contractor shall

procure a sufficient supply of these parts and components to assure minimum program delay for repair of equipment (including GFP).

9 TRANSITION PLAN

9.1 The Contractor shall have up to 90 days from date of contract award to ensure an orderly transition from the incumbent or stand up manning for new workload without impact on Government operations. This transition shall be accomplished in accordance with the Transition Plan, which is incorporated into the contract.

9.2 The incoming Contractor is responsible for all efforts and material related to transition. Prior to cutover

date, the incoming contractor shall make all necessary efforts to provide a seamless transition to the Government. The Transition Plan shall address how the Contractor shall accomplish Ramp-up and Phase out to include CFE acquisition and GFP inventory. The Contractor shall ensure all employees possess required training, qualifications, proficiency, and security clearances and satisfy all other access requirements prior to commencing contract performance following the 90-day transition period. Current security clearance is defined as valid, non-expired security clearances.

9.3 The Transition Plan shall detail the process by which the Contractor will provide a workforce that will meet the requirements of this PWS to include training and continuity planning due to attrition. If recruiting includes employees not currently employed by the Contractor, the plan shall support the intent to hire (CDRL No. A008; DI-MGMT-1945).

16

APPENDIX A : LIST OF ACRONYMS

ACO: Administrative Contract Officer AFGSC: Air Force Global Strike Command AFNWC: Air Force Nuclear Weapons Center CDRL: Contractor Data Requirements List CFE: Contractor Furnished Equipment EMP: Electromagnetic Pulse FAR: Federal Acquisition Regulation GFP: Government Furnished Property HEMP: High-altitude EMP HSEP: Hardness Surveillance Electromagnetic Pulse IAW: In Accordance With ICBM: Intercontinental Ballistic Missile IMP: Implementation Management Plan IMS: Integrated Master Schedule JSIIDS: Joint Services Interior Intrusion Detection System LF: Launch Facility MAF: Missile Alert Facility MASAM: Maintenance and Security Alarm Monitor MM: Minute Man MOA: Memorandum of Agreement NSAR: Nuclear Safety Analysis Report NSWG: Nuclear Surety Working Group OGE: Operational Ground Equipment PCO: Procuring Contract Office PMP: Program Management Plan PRP: Personnel Reliability Program RPIE: Real Property Installed Equipment RS: Re-entry System SCAR: Safety Compliance Assessment Report SEA: Safety Engineering Analysis SMW: Strategic Missile Wing SREMP: Source Region EMP USAF: United States Air Force

17

APPENDIX B : GOVERNMENT FURNISHED PROPERTY

Acc

ount

able

HSE

P-G

FP #

PART NUMBER Serial # NOMENCLATURE Other Description

LO

CA

TIO

N

Whe

re a

t

PRICE DATE

1 HSEP-GFP-0001

MDL 8010A PULSE GENERATOR HEWLETT PACKARD

V10 1F $2,000.00 21-Jan-1988

1 HSEP-GFP-0002

AN/PRM-10 S/N: 2069 TEST OSCILLATOR SET

V10 1C $296.00 22-Feb-1982

1 HSEP-GFP-0004

25-78825-1 W/S ADAPTER PEN C, WG 1/3/5

V10 3F $150.00 25-Jan-1980

1 HSEP-GFP-0005

25-78998-3 W/S ADAPTER WING III/V PEN 10

W/S Adapter Pen 10, WG 1/1X/3/5/6

V10 4A $250.00 25-Jan-1980

1 HSEP-GFP-0009

25-78998-6 W/S ADAPTER WING VI/I SQD 20 PEN

W/S ADAPTER, PEN 7AB, WG 1X/6

V10 5A $250.00 25-Jan-1980

1 HSEP-GFP-0010

25-78998-7 W/S ADAPTER WING VI I/SQD 20

W/S ADAPTER, PEN 8A, WG 1X/6

V10 5A $250.00 25-Jan-1980

1 HSEP-GFP-0011

25-78998-8 W/S ADAPTER W/S ADAPTER, PEN 9, WG 1X/6

V10 5A $250.00 25-Jan-1980

1 HSEP-GFP-0012

25-78998-8 W/S ADAPTER W/S ADAPTER, PEN 9, WG 1X/6

V10 5A $250.00 25-Jan-1980

1 HSEP-GFP-0020

25-78998-1 WEAPON SYSTEM ADAPTER WING III/IV

W/S ADAPTER, PEN 7 WG 3/5

V10 $250.00 25-Jan-1980

1 HSEP-GFP-0024

P/N N/A ACO 887 LEVELING JACK 20 TON

JACK, HYDRAULIC, 20 TON

V10 8F $120.00 29-Jun-1983

1 HSEP-GFP-0029

25-74470-12 381 CONTROL MONITOR A6 DRAWER

CONTROL MONITOR, (403A6-WG B1691/3/5)

V10 11C $30,572.00 19-Jan-1982

1 HSEP-GFP-0032

SIMULATOR LC LAUNCH CONTROL PANEL SIM ('A' LCP)

V10 8C $350.00 25-Jan-1980

1 HSEP-GFP- MDL 210400 43002064 MEGOHMMETER BIDDLE V10 4F $1,250.00 2-Aug-

18

0034 1985 1 HSEP-GFP-

0035 3174 3174 NANO FAST PROBE

P601 3174 NANOFAST - VOLTAGE PROBE & ATTENUATORS, A, B, C #4

V10 5F

1 HSEP-GFP-0036

3165 3165 NANO FAST PROBE P601 3165

NANOFAST - VOLTAGE PROBE & ATTENUATORS, A, B, C #9

V10 5F

1 HSEP-GFP-0037



V10 5F

1 HSEP-GFP-0038



V10 5F

1 HSEP-GFP-0039



V10 5F

1 HSEP-GFP-0040



V10 5F

1 HSEP-GFP-0041



V10 5F

1 HSEP-GFP-0042

P601 - A, B, & C 3245 (#10)

NANOFAST - VOLTAGE PROBE & ATTENUATORS

DAS 7E

1 HSEP-GFP-0044

3577A 2333A10158 NETWORK ANALYZER-REF POC-B71994-6

V10 1E $23,500.00 9-Feb-1988

1 HSEP-GFP-0046

CAT - NO 2225 IMPACT WRENCH 3/4 IN B & D

TORQUE WRENCH TQ 200

V10 DRWR #4

1 HSEP-GFP-0047

TE-25A TORQUE WRENCH TORQUE WRENCH, 300IN/LBS

V10 8D $85.00 2-Aug-1985

19

1 HSEP-GFP-0048

3389 ?? TORQUE WRENCH, DIAL TYPE

V10 8B

1 HSEP-GFP-0049

QJR217C TORQUE WRENCH 200 IN-LB

V10 EQUIPMENT BAG ON FLOOR

1 HSEP-GFP-0050

QJR284B 5090 TORQUE WRENCH TORQUE WRENCH, 1000 IN/LBS

V10 8B $85.00 2-Aug-1985

1 HSEP-GFP-0051

BU9 TORQUE WRENCH 25 FT. LB.

V10 DRWR #4

1 HSEP-GFP-0055

25-78216-1 SPACER ADAPTER ASSY

V10 DRWR #5 $1,260.00 25-Jan-1980

1 HSEP-GFP-0057

29-51129-1 CAP ASSY GROUNDING

V10 DRWR #5 $215.00 25-Jan-1980

1 HSEP-GFP-0058

25-27429-6 SPANNER ADAPTER

V10 DRWR #5 $15.00 25-Jan-1980

1 HSEP-GFP-0059

P/N N/A ACO 739 MAGNET SECURITY SWITCH

MAGNET, PAH V10 DRWR #5 $14.25 25-Jan-1980

1 HSEP-GFP-0060

P/N N/A ACO 739 MAGNET SECURITY SWITCH ACTUATING

MAGNET, PAH V10 DRWR #5 $14.00 6-Sep-1984

1 HSEP-GFP-0061

21-59910-507 SPANNER WRENCH V10 DRWR #5

1 HSEP-GFP-0062

3037-1367D AXA0373 CRANK HAND DOOR SECONDARY

V10 DRWR #4 $50.00 25-Jan-1980

1 HSEP-GFP-0066

25-74469-41 573 MESSAGE PROC DRAWER

MESSAGE PROCESSOR (403A4-1/3/5)

V10 10F

1 HSEP-GFP-0067

832359-501 3246 RECEIVER TRANSMITTER F DIG DATA

REC-TRANSMITTER, DIG DATA (403A3-1/3/5)

V10 11D

1 HSEP-GFP-0068

BC 401-8C 3319 NANOFAST BATT BHARGER

BATTERY CHARGER, NANOFAST

V10 5F

1 HSEP-GFP-0069

BC 401-8C 3318 NANOFAST BATT BHARGER

BATTERY CHARGER, NANOFAST

V10 5F

1 HSEP-GFP-0073

P/N N/A AMCO MODULAR ENCLOSURE (MON RACK)

V10 HSS TOP HALF

20

1 HSEP-GFP-0074

25-92664- (1,2,3,4) 25-92664-5 25-92664-6 25-92664-7 25-92663-13

25-92664- (1,2,3,4): INTERLOCK SHORTING PLUGS (4 EACH); 25-92664-5: SHIELDED SHORTING PLUGS (66 EACH); 25-92664-6: SHORT TO HOME PLUGS (4 EACH); 25-92664-7: JUMPER SHORTING PLUGS (156 EACH); 25-92663-13: PATCH BOX CABLES (65 EACH)

V10 5E

1 HSEP-GFP-0075

25-92663- (1,3,5,7) CABLE ASSEMBLY, (4 EACH)

V10 6D

1 HSEP-GFP-0076

25-92660- 3 BREAKOUT BOX V10 6A

1 HSEP-GFP-0077


1 HSEP-GFP-0078

25-92661- 1 and 25-92662- 1

25-92661- 1: SUPPRESSOR MODULES (35 EACH); 25-92662- 1: SWITCH MODULES (29 EACH)

V10 7C

1 HSEP-GFP-0079

25-92660- 5 PATCH BOX V10 Hanging Up in front of 7B,C,D

1 HSEP-GFP 0080


21

1 HSEP-GFP 0081

25-92660- 7 BREAKOUT BOX V10 7B

1 HSEP-GFP 0082

25-92660-8 BREAKOUT BOX V10 7B

1 HSEP-GFP 0083


1 HSEP-GFP 0084

25-92660- 6 BREAKOUT BOX V10 Hanging Up in front of 6B,C,D

1 HSEP-GFP 0085

25-92663- (9,10,11,12) BREAKOUT BOX V10 5D

1 HSEP-GFP 0089

8323661-502 3263 DETECTOR, AUDIO FREQ (403A2-1/3/5)

V10 10D

1 HSEP-GFP 0090

25-43703-66 120 RECEIVER, RADIO, UHF (1475A1-WG 1 only)

V10 10E

1 HSEP-GFP 0091

25-74470-12 593 CONTROL MONITOR (403A6-Wg 1/3/5)

V10 11F

1 HSEP-GFP 0094

38380-717-601 1052 MM POWER PROCESSOR (ALL)

V10 12C

1 HSEP-GFP 0095

38380-717-601 415 MM POWER PROCESSOR (ALL)

V10 12C

1 HSEP-GFP 0096

1801400-1 982 DECODER, CMD SIG (G) (403A1A1-1/3/5)

V10 8B

1 HSEP-GFP 0098

55100-107-501 MYP0290 GUID CNTL UNIT, COUPLER (403A5-1/3/5)

COUPLER UNIT CONTROL, GUIDANCE

V10 11E

1 HSEP-GFP 0099

Fluke 1550 686 MEGOHMMETER V10 5E $2,900.00 24-Mar-2003

1 HSEP-GFP 0100

59982-315-511 CABLE SET, CONT - MON & CTU

V10 6C

1 HSEP-GFP 0101

YG9638AI 23 CONTROLLER-MONITOR

V10 6C

1 HSEP-GFP 0102

MDL 9072-20 238A401180190 IMPACT WRENCH 1/2 IN MILWAUKEE

V10 Equipment bag on the floor

$190.00

22

1 HSEP-GFP 0103

25-47694-4 98747-AK-01 MONITOR JUNCTION BOX, 220 VOLT PLUG


1 HSEP-GFP 0104


V10 On the back bench in V10

1 HSEP-GFP 0105


V10 On the back bench in V10

1 HSEP-GFP 0106



1 HSEP-GFP 0107

MDL RCP-402S CADET SHOP HEATER 4000 WATT

V10 BROKEN, On the back bench in V10

1 HSEP-GFP 0110

P/N N/A CABLE PROTER

CABLE PROTECTOR

CABLE PROTECTOR (DRIVE OVER)

V12 FLOOR IN BACK OF V12

$329.75 11-Feb-1985

1 HSEP-GFP 0111


CABLE PROTECTOR



$329.75 11-Feb-1985

1 HSEP-GFP 0112


CABLE PROTECTOR



$329.75 11-Feb-1985

1 HSEP-GFP 0113


CABLE PROTECTOR



$329.75 11-Feb-1985

1 HSEP-GFP 0114

N/A CABLE PROTECTOR (DRIVE OVER)


$35.00

1 HSEP-GFP 0115



$35.00

1 HSEP-GFP 0116



$35.00

1 HSEP-GFP 0117



$35.00

23

1 HSEP-GFP 0118

P/N N/A ACO 4552 INDICATOR PHASE SEQUENCE

V12 ON WALL OF V12

$28.00 25-Jan-1980

1 HSEP-GFP 0123

25-79124-1 SITE ISOLATION POWER UNIT

BIG BOX V12 BIG ISOLATED BOX

$2,700.00 25-Jan-1980

1 HSEP-GFP 0124

8020B 2751358 DIG MULTIMETER MULTIMETER, FLUKE DIGITAL

OFF TRL

JOHN'S OFFICE

$189.00 2-Aug-1985

1 HSEP-GFP 0125

SK-HSP-2-8630-21-1 ADAPTER CABLE-PEN 13

ADAPTER CABLE, PEN 13 (15" LONG 'LT TO 'N')

OFF TRL

JOHN'S OFFICE

$60.00 10-Dec-1985

1 HSEP-GFP 0126

8752A NETWORK ANALYZER, HEWLETT PACKARD

OFF TRL

JOHN'S OFFICE

$23,044.72

1 HSEP-GFP 0127

MDL: NPH10 1299343 GE MVS MOBILE RADIO (GFP REPAIR)

OFF TRL

$400.00

1 HSEP-GFP 0128


OFF TRL

$400.00

1 HSEP-GFP 0129

MDL: PC3H3A16 1205678 GE PCS PORTABLE RADIO (USED)

OFF TRL

$200.00

1 HSEP-GFP 0130

MDL PC202S 1543396 GE PCS PORTABLE RADIO

GE PCS PORT RADIO (CAP EXP/LETTER)

OFF TRL

$250.00

1 HSEP-GFP 0131

MDL: PC202S 1368842 GE PCS PORTABLE RADIO (GFP REPAIR)

OFF TRL

$250.00

1 HSEP-GFP 0132


OFF TRL

$250.00

1 HSEP-GFP 0133

MDL: PC216S 1291971 GE PCS PORTABLE RADIO (USED)

OFF TRL

$200.00

1 HSEP-GFP 0134


OFF TRL

$250.00

1 HSEP-GFP 0135

MDL PC202S 1543397 GE PCS PORTABLE RADIO

GE PCS PORT RADIO (CAP EXP/LETTER)

OFF TRL

$250.00

1 HSEP-GFP 0136

MDL: PC202S 1368840 GE PCS PORTABLE RADIO (GFP

OFF TRL

$250.00

24

REPAIR)

1 HSEP-GFP 0137

P/N 10215-107-1 UJC0024 CARTIDGE TAPE UNIT (CTU) (MGOC24)

OFF TRL

1 HSEP-GFP 0138

CDM1250 103TAYD688 MOTOROLA UHF RADIO

OFF TRL

$500.00

1 HSEP-GFP 0139

QJR217B TORQUE WRENCH 200

TORQUE WRENCH 200 IN/LBS

OFF TRL

JOHN'S OFFICE

$85.00 13-May-1985

1 HSEP-GFP 0140

MDL 749 876-925 VOLT AMPMETER (WESTON CLAMP-ON) V5 5E $55.00

1 HSEP-GFP 0142

5302A COUNTER ELECTRONIC W/BATTERY PACK

V5 5B $275.00 25-Jan-1980

1 HSEP-GFP 0143

5302A COUNTER ELECTRONIC W/BATTERY PACK

V5 5B $275.00 25-Jan-1980

1 HSEP-GFP 0144

TYPE 109 2233 PULSE GENERATOR

TEKTRONIX V5 5B $550.00 25-Jan-1980

1 HSEP-GFP 0145

1433M DECADE RESISTOR-POC-B67801-6920

V5 5B $1,040.00 26-Sep-1986

1 HSEP-GFP 0146

MDL 1210S 15VDC POWER SUPPLY

V5 5B $195.00 11-Feb-1980

1 HSEP-GFP 0147

DRIVE ADAPTER KIT

SSPLA FILTER V5 5H $500.00 25-Jun-1985

1 HSEP-GFP 0148

P6201 B73130 PROBE VOLTAGE PROBE, HIGH VOLTAGE, TEKTRONIX

V5 5C $1,200.00 19-Jun-1984

1 HSEP-GFP 0149

206004-025 SP13211 POWER SUPPLY 28VDC, SPELLMAN V5 5C $300.00 25-Jan-1980

1 HSEP-GFP 0150

DAS46A 1314 1314 VOLTAGE STANDARD

GENERAL RESIS. V5 5C $950.00 31-May-1988

1 HSEP-GFP 0151

ME25-39494-4 ISOLATION PLUG B' SYSTEM V5 5C $25.00 30-Nov-1979

1 HSEP-GFP 0152

1433-M DECADE RESISTOR-POC-GG0677-6920

GENERAL RADIO V5 5B $965.20 17-Dec-1984

1 HSEP-GFP MDL 44-400C INDICATOR PHASE V5 5D $35.00 25-Jan-

25

0153 SEQ 1980 1 HSEP-GFP

0154 METER

FREQUENCY 400 MHZ BIDDLE V5 5D $56.00 4-Mar-

1980 1 HSEP-GFP

0155 METER

FREQUENCY 60 MHZ BIDDLE V5 5D $53.00 25-Jan-

1980 1 HSEP-GFP

0156 MDL RM6P6000D POWER SUPPLY 28 VDC, SPELLMAN V5 5C $795.00 2-Aug-

1985 1 HSEP-GFP

0157 MDL 260-6 MULTIMETER SIMPSON V5 5E $198.00 25-Jan-

1980 1 HSEP-GFP

0158 CSU-290 PORTABLE

CAPACITOR SUBSTITUTION S

CAPACITOR SUBSTITUTION BOX

V5 5E $223.00 13-Mar-1986

1 HSEP-GFP 0159

TYPE 130 L-C METER W/CABLE

V5 5E $110.00 2-Aug-1985

1 HSEP-GFP 0160

PR57 3627087M P V ISOLATION TRANS AND SAFETY AN

VAR. ISOLATION TRANS AND SAFETY ANAL, SENCORE PR57

V5 5E $359.45 13-Mar-1986

1 HSEP-GFP 0161

HP355D 1041A18470 VARIABLE ATTENUATOR

ATTENUATOR, VARIABLE, HP

V5 5F $60.00 2-Aug-1985

1 HSEP-GFP 0162

LA250 POWER SUPPLY/LAMBDA

V5 5E $240.00 21-Mar-1986

1 HSEP-GFP 0163

355C 219-16805 ATTENUATOR-VHF ATTENUATOR, VHF, HP

V5 5F $70.00 25-Jan-1980

1 HSEP-GFP 0164

355C 219-14181 ATTENUATOR-VHF ATTENUATOR, VHF, HP

V5 5F $70.00 25-Jan-1980

1 HSEP-GFP 0165

343A FLUKE DC VOLTAGE STANDARD

DC VOLTAGE CALIBRATER, FLUKE

V5 5F $2,595.00 2-Feb-1988

1 HSEP-GFP 0166

80K-40 906311 HIGH VOLTAGE PROBE

PROBE, HIGH VOLTAGE, FLUKE

V5 5F $76.00 4-Nov-1987

1 HSEP-GFP 0167

25-77416-1 SIMULATOR DEVICE

ORDNANCE SIMULATOR, MSS (SPARE)

V5 5F $300.00 25-Jan-1980

1 HSEP-GFP 0168



V5 5F $300.00 25-Jan-1980

1 HSEP-GFP 0169



V5 5F $300.00 25-Jan-1980

26

1 HSEP-GFP 0170



V5 5F $300.00 26-Jan-1980

1 HSEP-GFP 0171



V5 5F $300.00 25-Jan-1980

1 HSEP-GFP 0174

8860A 3695009 DIGITAL MULTIMETER

MULTIMETER, FLUKE DIGITAL

V5 5G $1,491.32 6-Jan-1986

1 HSEP-GFP 0175



V5 5G $1,491.32 6-Jan-1986

1 HSEP-GFP 0176



V5 5G $1,491.32 6-Jan-1986

1 HSEP-GFP 0177

400-4STC-1050 STC FIELD KIT STC FIELD OPTICAL REPAIR KIT, OFTI

V5 4B $1,099.00 2-Mar-1988

1 HSEP-GFP 0178

MDL 5310 FOTEC FIBER OPTIC REPAIR AND TEST SET

V5 4B

1 HSEP-GFP 0179

MDL 5310 FOTEC FIBER OPTIC REPAIR AND TEST SET

V5 4B

1 HSEP-GFP 0180

MDL 466 OSCILLOSCOPE W/OPTIONS

TEKTRONIX V5 4C $7,335.00 21-Jan-1988

1 HSEP-GFP 0181

MDL 180 307571 SWEEP/FUNCTION GENERTOR

WAVETEK V5 4C $500.00 3-Aug-1985

1 HSEP-GFP 0182

TP-201351-T0 CRIMP TOOL CRIMP TOOL KIT, PYLE NATIONAL

V5 2E $60.00 20-May-1987

1 HSEP-GFP 0183

EC2000 SOLDERING SYSTEM

SOLDERING STATION, WELLER

V5 2F $168.00 7-Aug-1986

1 HSEP-GFP 0184

ENC2000 SOLDERING SYSTEM

V5 2F $168.00 7-Aug-1986

1 HSEP-GFP 0185

45-133B THERMO STRIP IDEAL V5 2H

1 HSEP-GFP 0186

EC2000 SOLDERING SYSTEM

SOLDERING STATION, WELLER

V5 2F $168.00 7-Aug-1986

1 HSEP-GFP 0187

P/N N/A CABINET CABINET, FILE 4 DRWR

V5 1D $50.00 9-Dec-1985

1 HSEP-GFP 0188

P/N N/A CABINET FILE 4 DWR

CABINET FILE 4 DWR LTR

V5 1C $50.00 9-Dec-1985

HSEP-GFP 26-16652-2 INSULATOR INTRA COMMAND LIN V5 4F $15.00

27

0189 FLIGHT ISOLATOR - WG 3/5 HSEP-GFP

0190 26-16652-2 INSULATOR INTRA

FLIGHT COMMAND LIN ISOLATOR - WG 3/5

V5 4F $15.00

HSEP-GFP 0191

26-16652-2 INSULATOR INTRA FLIGHT

COMMAND LIN ISOLATOR - WG 3/5

V5 4F $15.00

HSEP-GFP 0192



V5 4F $15.00

HSEP-GFP 0193



V5 4F $15.00

HSEP-GFP 0194



V5 4F $15.00

HSEP-GFP 0195



V5 4F $15.00

HSEP-GFP 0196



V5 4F $15.00

HSEP-GFP 0197



V5 4F $15.00

HSEP-GFP 0198



V5 4F $15.00

HSEP-GFP 0199



V5 4F $15.00

HSEP-GFP 0200



V5 4F $15.00

HSEP-GFP 0201



V5 4F $15.00

HSEP-GFP 0202



V5 4F $15.00

HSEP-GFP 0203



V5 4F $15.00

HSEP-GFP 0204



V5 4F $15.00

HSEP-GFP 0205



V5 4F $15.00

1 HSEP-GFP 0206

25-79224-1 I-BOX ADAPTER Command Line Isolator-WG1

V5 4F $50.00 2-Aug-1985

1 HSEP-GFP 0207

25-79224-1 I-BOX ADAPTER Command Line Isolator-WG1

V5 4F $50.00 2-Aug-1985

1 HSEP-GFP 0208

45-184 WIRE STRIPPER W L-5217 AND L-5563

WIRE STRIPPER - IDEAL IND. EZ

V5 10B $58.38 1-May-1986

28

1 HSEP-GFP 0209

AMP59275 CRIMPER LUGGER, AMP V5 10B $30.00 2-Aug-1985

1 HSEP-GFP 0210

MDL 8000A-01 DIGITAL VOLTMETER W/BATTERY


V5 $570.00 21-Jan-1988

1 HSEP-GFP 0211

L5562 STRIPPER WIRE STRIPPER - IDEAL IND. STRIPMASTER

V5 10B $38.00 2-Aug-1985

1 HSEP-GFP 0212

59250 CRIMPER LUGGER, AMP V5 10B $25.00 2-Aug-1985

1 HSEP-GFP 0213

L5560 STRIPPER WIRE STRIPPER - IDEAL IND. STRIPMASTER

V5 10B $38.00 2-Aug-1985

1 HSEP-GFP 0214

M22520/1-01 CRIMPING TOOL, PIN, DANIELS AF8

V5 10B

1 HSEP-GFP 0215

WT-416 WIRE LUGGER, THOMAS & BETTS

V5 10B $212.76 6-Mar-1986

1 HSEP-GFP 0216

59239-4 CRIMPING TOOL V5 10B $38.00 2-Aug-1985

1 HSEP-GFP 0217

P/N N/A ELEC SCREWD

ELECTRIC SCREWDRIVER

V5 $50.00 12-Jun-1986

1 HSEP-GFP 0218

MDL H1O1A SOLDERING UNIT SOLDERING UNIT, CONTACT

V5 $300.00 14-Sep-1983

1 HSEP-GFP 0219

MDL MARK V HEAT CONTROL HEAT CONTROL, MEASUREMENTS GROUP

V5 $125.00 12-Jun-1986

1 HSEP-GFP 0220

MDL 8200 SOLDERING GUN V5 $20.00 2-Aug-1985

1 HSEP-GFP 0221

MBT-200 DESOLDER SYSTEM/STATION

DESOLDER STATION, PACE

V5 2H 1-Jul-1986

1 HSEP-GFP 0222

11850A HSP0001 POWER SPLITTER POWER SPLITTER, HEWLETT PACKARD

V5 7B5 $684.00 21-Jan-1988

1 HSEP-GFP 0223

HP11652-60009 POWER SPLITTER POWER SPLITTER, HEWLETT PACKARD

V10 2ND IN OPTICS CAL KIT

$125.00 10-Jul-1987

1 HSEP-GFP 0224

93686-3 CURRENT PROBE CALIBRATION BOX

V10 2D $300.00 25-Jan-1980

1 HSEP-GFP 0225

P6015 PROBE/TEKTRONIX PROBE, HIGH VOLTAGE,

V5 5E $385.00 25-Jan-1980

29

TEKTRONIX 1 HSEP-GFP

0226 25-77416-3 3 SQUIB

SIMULATOR, UPPER UMBILICAL

V5 5F

1 HSEP-GFP 0227

25-77416-3 4 SQUIB SIMULATOR, UPPER UMBILICAL

V5 5F

1 HSEP-GFP 0229

27160AAB WIRE WRAP TOOL W/BIT AND SLEEVE

V5 2F $204.49 20-Jan-1988

1 HSEP-GFP 0231

E-Z WIRE STRIPPER WIRE STRIPPER - IDEAL IND. STRIPMASTER

V5 10B $35.00 2-Aug-1985

1 HSEP-GFP 0232

MRB-45 362-2268 HEAD SET HEAD SET TELEX V10 EQUIPMENT BAG ON THE FLOOR

$33.00 25-Jan-1980

1 HSEP-GFP 0233

P/N N/A ACO 4144 HEADSET V5 3E $125.00 2-Aug-1985

1 HSEP-GFP 0234


RED EXCU

In Pickup $400.00

1 HSEP-GFP 0235

CDM1250 103TAYH143 MOTOROLA UHF RADIO

RED EXCU

In Pickup $500.00

1 HSEP-GFP 0236


GRN EXCU

In Green $400.00

1 HSEP-GFP 0237

CDM1250 103TAYD689 MOTOROLA UHF RADIO

GRN EXCU

In Green $500.00

1 HSEP-GFP 0238

MDL SE-40M BATTERY CHARGER

BATTERY CHARGER, SCHUMACHER

V9 UNDER THE BENCH

$39.00 2-Aug-1985

1 HSEP-GFP 0239

3182 3182 NANO FAST OP 300-2AR 3182

NANOFAST - FIBER OPTIC RECEIVER #2

DAS

1 HSEP-GFP 0240

3164 3164 NANO FAST OP 300-2AR 3164


DAS

1 HSEP-GFP 0241

3176 3176 NANO FAST OP 300-2AR 3176


DAS

1 HSEP-GFP 0242

3170 3170 NANO FAST OP 300-2AR 3170


DAS

1 HSEP-GFP 0243

3179 3179 NANO FAST OP 300-2AR 3179


DAS

30

1 HSEP-GFP 0244

3167 3167 NANO FAST OP 300-2AR 3167


DAS

1 HSEP-GFP 0245

3173 3173 NANO FAST OP 300-2AR 3173


DAS

1 HSEP-GFP 0246

OP 300-2AR 4102 (#10) NANOFAST - FIBER OPTIC RECEIVER

DAS In the DAS $36,970.00

1 HSEP-GFP 0248

3178 3178 NANO FAST OP 300-2AT 3178

NANOFAST - FIBER OPTIC TRANSMITTER #2

DAS

1 HSEP-GFP 0249

3181 3181 NANO FAST OP 300-2AT 3181


DAS

1 HSEP-GFP 0250

3166 3166 NANO FAST OP 300-2AT 3166


DAS

1 HSEP-GFP 0251

3175 3175 NANO FAST OP 300-2AT 3175


DAS

1 HSEP-GFP 0252

3163 3163 NANO FAST OP 300-2AT 3163


DAS

1 HSEP-GFP 0253

3169 3169 NANO FAST OP 300-2AT 3169


DAS

1 HSEP-GFP 0254

3172 3172 NANO FAST OP 300-2AT 3172


DAS

1 HSEP-GFP 0255

OP 300-2AT 4101 (#10) NANOFAST - FIBER OPTIC TRANSMITTER

DAS 7G

1 HSEP-GFP 0272

MDL 9 ALUM HORIZ ROLL APPLIANCE HAND TR

HAND TRUCK, APPLIANCE

STO TRL

IN THE PULL TRAILER

$218.00 3-Mar-1983

1 HSEP-GFP 0273

MDL 140-U-1025DG HAND TRUCK STO TRL

IN THE PULL TRAILER

$120.00 2-Aug-1985

1 HSEP-GFP 0274

MDL PERFECT HAND TRUCK STL STO TRL

IN THE PULL TRAILER

$150.00 2-Aug-1985

31

1 HSEP-GFP 0277

RMMDE20204 LCC SECURITY GATE ASSY

LCC SECURITY GATE ASSY - 'A' GATE

STO TRL

IN THE PULL TRAILLER

$1,352.00

1 HSEP-GFP 0285


V9 UNDER THE BENCH

$120.00 29-Jun-1983

1 HSEP-GFP 0286


V9 UNDER THE BENCH

$120.00 29-Jun-1983

1 HSEP-GFP 0287

TQ 200 TORQUE WRENCH TORQUE WRENCH, 1500 FT/LBS

V9 GREEN CABINET DRWR #3

$80.00 2-Aug-1985

1 HSEP-GFP 0288

ME25-36980-6002 HOISTING UNIT PAH PORTABLE

CABLE ASSEMBLY, PAH RESTRAINT

V9 5H $311.00 25-Jan-1980

1 HSEP-GFP 0289

MDL 8000A-01 DIGITAL VOLTMETER W/BATTERY


V9 4E $570.00 6-Jan-1986

1 HSEP-GFP 0290

2Z045 HEAT GUN HEAT GUN, DAYTON V9 1B $10.00 12-Jun-1986

1 HSEP-GFP 0291

MDL 8137 W12-77 BENCH GRINDER MONTGOMERY WARDS

V9 ON THE BENCH

$125.00 2-Aug-1985

1 HSEP-GFP 0292

1150 815V461 DRILL PRESS PEDESTAL 15 IN

POWERMATIC V9 ON THE FLOOR

$250.00 25-Jan-1980

1 HSEP-GFP 0293

MDL 50 CABINET RED PAINT STORAGE

V9 ON THE FLOOR

$491.00 24-Aug-1981

1 HSEP-GFP 0294

MDL 65420 HAND PUMP 10,000 PSI

BLACKHAWK V9 3H $300.00 2-Aug-1985

1 HSEP-GFP 0297

MDL 315.17560 A3267 ROUTER ROUTER CRAFSTMAN V9 2E $50.00 2-Aug-1985

1 HSEP-GFP 0298

MDL U338 8075070 HEAVY DUTY SAW CICULAR SAW, HEAVY DUTY, 8" B&D

V9 1C $250.00 2-Aug-1985

1 HSEP-GFP 0304

P/N N/A IMPACT WREN MDL BG4??

3/8 IN IMPACT WRENCH

IMPACT WRENCH, 3/8 IN MILLERS FALLS

V9 1F $75.00 2-Aug-1985

1 HSEP-GFP 0306

TQ25 TORQUMETER V9 6G $50.00 2-Aug-1985

1 HSEP-GFP 0307

QJR200D TORQUE WRENCH 100 IN-LB

V9 6G $88.50

1 HSEP-GFP 0308

P/N N/A TAP AND DIE 614?

TAP AND DIE SET ACE V9 1F $57.00 2-Aug-1985

32

1 HSEP-GFP 0309

2Z045 HEAT GUN DAYTON V9 1E $100.00 12-Jun-1986

1 HSEP-GFP 0311

8060A RECIPROCATING SAW

INGERSOLL-RAND V9 1F $225.00 14-Sep-1983

1 HSEP-GFP 0312

3102 43910065 SABER SAW B & D V9 1F $100.00 2-Aug-1985

1 HSEP-GFP 0314

MDL 0332-04 BATTERY CHARGER 10 AMP

VIKING V9 ON THE BENCH

$39.00 2-Aug-1985

1 HSEP-GFP 0315

2Z045 HEAT GUN DAYTON V9 1E $50.00 2-Aug-1985

1 HSEP-GFP 0317

MRB-45 326-M051 HEAD SET V10 EQUIPMENT BAG ON THE FLOOR

$33.00 25-Jan-1980

1 HSEP-GFP 0318

QJR3250 TORQUE WRENCH 0-250 FT~LB

V9 6G $77.66 30-Nov-1982

1 HSEP-GFP 0319

MDL 6169 350 DIAL TORQUE TORQUE WRNCH, DIAL IND TYPE, 75 IN/LBS

V9 $61.25 2-Aug-1985

1 HSEP-GFP 0320

MDL VL0602112 Z31412485 COLEMAN AIR COMPRESSOR

V9 Floor in back of V9

$280.00

1 HSEP-GFP 0341

00604 TAP AND DIE SET GREENFIELD V9 4G $600.00 14-Sep-1983

1 HSEP-GFP 0342

ME25-36980-105 CABLE ASSEMBLY, PAH RESTRAINT

V9 Floor in front of V9

$128.00 4-Jan-1980

1 HSEP-GFP 0345

1GDJ7H1B8XJ510045 TRUCK, GMC C6500, MECHANICAL MAINT VAN (09)

VEH 9 $31,875.00

1 HSEP-GFP 0346

1GDJ7H1B5XJ510312 TRUCK, GMC C6500, ELECTRICAL MAINT VAN (05)

VEH 5 $31,875.00

1 HSEP-GFP 0347

1GDJ7H1B7XJ509999 TRUCK, GMC C6500 , POWER DISTRIBUTION VAN (12)

VEH 12 $31,875.00

1 HSEP-GFP 0348

P/N N/A WAREHOUSE VAN 10 (40' BOX VAN)

VEH 10 $3,000.00

33

1 HSEP-GFP 0349

01-1324214-1 HIGH ENERGY PULSER

HEP VAN

$4,500,000.00

1 HSEP-GFP 0351

1GDJ7H1B5XJ510262 TRUCK, GMC C6500 , 16 FT FLATBED W/HAP MDL 104

VEH BM TRK

$31,875.00

1 HSEP-GFP 0352

lWA-00-0500 SHELTER PAH BLUE BUILDING $1,500.00 19-Sep-1980

1 HSEP-GFP 0355

25-78049-1 RACK ISOLATED POWER UNIT (MON RACK)

V10 HSS BOTTOM HALF

1 HSEP-GFP 0360

P/N N/A 10KV 50 OHM

10KV 50 OHM LOAD

V10 DRWR #1 $225.00 2-Aug-1985

1 HSEP-GFP 0361

25-60552-9 WRENCH SET ELEC CONNECTORS

V10 8B $75.00 11-Mar-1980

1 HSEP-GFP 0363

P/N N/A PORTA PACK

PORTA PACK V9 3H $115.00 2-Aug-1985

1 HSEP-GFP 0364

MAS0972 MISSILE GUIDANCE SET, INSTRUMENTED

1 HSEP-GFP 0366

85000-102-554 A4V0207 INERT PSRE-FOR TEST ONLY

$99,000.00 28-Jun-1988

1 HSEP-GFP 0367

85000-102-554 A4V0206 INERT PSRE-FOR TEST ONLY

$99,000.00 28-Jun-1988

1 HSEP-GFP 0368

29-48711-2 SPACER BLK SET ARTICULATING ARM

KIT 1 $300.00 19-Sep-1980

1 HSEP-GFP 0369


KIT 1 $100.00

1 HSEP-GFP 0370

25-77416-2 SQUIB SIMULATOR, BGG & UMBILICAL RETRACT

KIT 1 $300.00

1 HSEP-GFP 0371


KIT 1 $300.00

1 HSEP-GFP 0372

25-77416-2 SQUIB SIMULATOR, BGG & UMBILICAL

KIT 1 $300.00

34

RETRACT

1 HSEP-GFP 0373


KIT 1 $300.00

1 HSEP-GFP 0374

ACO 808 BGG GAS GENERATOR PLUG

KIT 1

1 HSEP-GFP 0375


KIT 1

1 HSEP-GFP 0376


KIT 1

1 HSEP-GFP 0377


KIT 1

1 HSEP-GFP 0378

29-45754-1 SQUIB SIMULATOR ADAPTER

KIT 1

1 HSEP-GFP 0379


KIT 1

1 HSEP-GFP 0380


KIT 1

1 HSEP-GFP 0381


KIT 1

1 HSEP-GFP 0382


KIT 2 $100.00

1 HSEP-GFP 0383


KIT 2 $300.00

1 HSEP-GFP 0384


KIT 2 $300.00

1 HSEP-GFP 0385


KIT 2 $300.00

1 HSEP-GFP 0386

25-77416-2 SQUIB SIMULATOR, BGG

KIT 2 $300.00

35

& UMBILICAL RETRACT

1 HSEP-GFP 0387


KIT 2 $300.00

1 HSEP-GFP 0388


KIT 2

1 HSEP-GFP 0390


KIT 2

1 HSEP-GFP 0391


KIT 2

1 HSEP-GFP 0393


KIT 2

1 HSEP-GFP 0394


KIT 2

1 HSEP-GFP 0395


KIT 2

1 HSEP-GFP 0396


KIT 2

1 HSEP-GFP 0397


KIT 2

1 HSEP-GFP 0398


ORDNANCE SIMULATOR, MSS (KIT 2)

STO TRL

$300.00 25-Jan-1980

1 HSEP-GFP 0399



STO TRL

$300.00 25-Jan-1980

1 HSEP-GFP 0400



STO TRL

$300.00 25-Jan-1980

1 HSEP-GFP 0401



STO TRL

$300.00 25-Jan-1980

1 HSEP-GFP 0402



STO TRL

$300.00 25-Jan-1980

1 HSEP- GFP 0403


ORDNANCE SIMULATOR, MSS (KIT

STO TRL

$300.00 25-Jan-1980

36

1) 1 HSEP-GFP

0404 25-77416-1 SIMULATOR

DEVICE ORDNANCE SIMULATOR, MSS (KIT 2)

STO TRL

$300.00 25-Jan-1980

1 HSEP-GFP 0405



STO TRL

$300.00 25-Jan-1980

1 HSEP-GFP 0406



STO TRL

$300.00 25-Jan-1980

1 HSEP-GFP 0407



STO TRL

$300.00 25-Jan-1980

1 HSEP-GFP 0408



STO TRL

$300.00 25-Jan-1980

1 HSEP-GFP 0409



STO TRL

$300.00 25-Jan-1980

1 HSEP-GFP 0410


SQUIB SIMULATOR, BGG & UMBILICAL RETRACT

KIT 1 $300.00 25-Jan-1980

1 HSEP-GFP 0411

RSS0001 SIMULATOR RE-ENTRY DISC

DISCRETE V10 $1,000.00 25-Jan-1980

1 HSEP-GFP 0412

25-64700-8 500 SIMULATOR RE-ENTRY FUZING

V10 $1,680.00 25-Jan-1980

1 HSEP-GFP 0414

MAS0961 MISSILE GUIDANCE SET, INSTRUMENTED

Nov-08

1 HSEP-GFP 0415

AAH79KDC9PW5BN /WPLN4114AR

626TJW1023 PR-1500 VHF Radio w/ Battery Charger

$860.00

1 HSEP-GFP 0416



$860.00

1 HSEP-GFP 0417



$860.00

1 HSEP-GFP 0418



$860.00

37

1 HSEP-GFP 0419



$860.00

1 HSEP-GFP 0420



$860.00

1 HSEP-GFP 0421

Tripod Antenna Mount

1 HSEP-GFP 0422

5 ft Mast

2 HSEP-GFP 0003

25-78825-18 W/S ADAPTER PULSE PEN D, WG 1X/6

Layton Shed Closet $250.00 25-Jan-1980

2 HSEP-GFP 0006

SEPARATION NUT W/S ADAPTER, PEN O WG 1/1X/3/5/6

Layton Shed $350.00 5-Sep-1985

2 HSEP-GFP 0007

25-79662-1 WEAPON SYSTEM ADAPTER

W/S ADAPTER, PEN 13, WG 1/1X/3/5/6

Layton Shed $300.00 22-Jan-1982

2 HSEP-GFP 0008

W/S ADAPTER WING II/VVI PEN 13

Layton Shed $250.00 27-Aug-1982

2 HSEP-GFP 0021

25-78825-21 DRIVE ADAPTER-POC-B72665-8020

W/S ADAPTER, PEN 11A,B,D WG 1/3/5

Layton Shed Closet $396.00 3-Feb-1984

2 HSEP-GFP 0022

25-78825-22 DRIVE ADAPTER-POC-B72665-8020

W/S ADAPTER, PEN 11C WG 1/3/5

Layton Shed Closet $135.00 3-Feb-1984

2 HSEP-GFP 0023

25-78998-2 WEAPON SYSTEM ADAPTER WING III/V

W/S ADAPTER, PEN 8 WG 3/5

Layton Shed $250.00 25-Jan-1980

2 HSEP-GFP 0043

87302 LECROY OSCILLOSCOPE

O-SCOPE, DIGITAL, LECROY 9400

Layton Lab $1,275.00

2 HSEP-GFP 0052

87280 DIGITAL OSCILLOSCOPE

O-SCOPE, DIGITAL, LECROY 9400

Layton Lab $1,275.00

2 HSEP-GFP 0109

25-79124-14 SITE ISOLATION POWER

81205-25-79124-14 PWR FILTER UNIT, (SITE ISO PWR SMALL BOX)

Layton Office #2 $1,050.00 25-Jan-1980

2 HSEP-GFP 0256

25-79128-1 150 PWR UNIT 25-79128-1

RACK ISOLATED POWER UNIT (ON DAS)

Layton Shed

2 HSEP-GFP 0303

2Z045 HEAT GUN DAYTON Layton Lab Tool Box $50.00 2-Aug-1985

2 GOV-05218 BPE-32-1.5 POWER SUPPLY Layton Lab $325.00 25-Jan-1980

38

2 GOV-05394 MDL 6226B 3019A-06185 DC POWER SUPPLY, HEWLETT PACKARD

Layton Lab $784.00

2 GOV-05403 MDL 5600 GENERATOR Layton Lab $465.00 25-Jan-1980

2 GOV-05404 MDL 8082A 1822G02018 PULSE GENERATOR, HEWLETT PACKARD

Layton Lab $4,246.00 11-May-1981

2 GOV-13215 HP7470A SN2308A5482

XY PLOTTER W/OPT 2

Layton Lab $777.45 13-Feb-1984

2 GOV-13256 3577A 2333A10653 NETWORK ANALYZER

NETWORK ANALYZER, HEWLETT PACKARD

Layton Lab $24,000.00 2-Aug-1988

2 GOV-13386 MBT-200 DESOLDER SYSTEM/STATION

DESOLDER STATION, PACE

Layton Lab $495.00 1-Jul-1986

2 GOV-13416 2560T15 CYLINDER HAND TRUCK

Layton Front Closet $124.20

2 GOV-13475 MDL LS PLUS LS000159 IOMEGA LASER SAFE PLUS

PRO 1 Layton Restricted Area

$3,239.00 16-Nov-1993

Total $5,053,369.27

1 Field 2 Layton

Office

39

OGDEN AIR LOGISTICS CENTER

UNITED STATES AIR FORCE

HILL AIR FORCE BASE, UTAH 84056

APPENDIX “C” SAFETY, FIRE PROTECTION AND HEALTH SPECIFICATION

INDUSTRIAL SAFETY REQUIREMENTS

For

Hardness Surveillance EMP Program (HSEP)

PREPARED BY:

XScott DixonICBMSD System Safety Program Manager

40

SECTION I - GENERAL REQUIREMENTS

A. Safety Program Requirements.

The contractor will implement a safety program plan that ensures protection of Government personnel and property. The program will consist of, as a minimum:

1. Mishap reporting, as defined in paragraph B1 below.

2. A Safety Plan that addresses, as a minimum, the subjects listed in Section II –Specific Requirements, and will be used during the performance of the work described in the contract. The Safety Plan will be approved by ICBMSD System Safety Program Office, AFNWC/NIEV prior to commencement of any work described in this contract.

3. Routine and recurring surveillance to ensure the safety requirements of this contract are enforced.

4. Competent personnel to provide surveillance of the Safety Plan.

5. Identification of segregated work site locations for operations that cannot be co-mingled with general industrial operations and the process for ACO approval of operations and changes at these specific sites.

6. All contractor personnel shall be trained and qualified to perform their duties safely.

7. The contractor shall include a clause in all subcontracts requiring the subcontractors to comply with the safety provisions of this contract, as applicable.

B. Mishap Notification

1. The contractor shall notify 75 ABW/SEG (801-777-3333), or the Hill AFB Command Post (777-3007) after normal duty hours, and the designated Government Representative (GR), i.e., the ACO, PCO, or DCMA QAR (Quality Assurance Representative) within one (1) hour of all mishaps or incidents at or exceeding $2,000 (material + labor) in damage to DOD property entrusted by this contract, even if the government is wholly or partially reimbursed. This notification requirement shall also include physiological mishaps/incidents. A written or email copy of the mishap/incident notification shall be sent within three calendar days to the GR, who will forward it to 75 ABW/SEG. For information not available at the time of initial notification, the contractor shall provide the

41

remaining information no later than 20 calendar days after the mishap, unless extended by the ACO. If work is being performed at any other Government owned facility, mishaps must be reported to the local facility Command Post and/or Safety Office.

Mishap notifications shall contain, as a minimum, the following information:

(a) Contract, Contract Number, Name and Title of Person(s) Reporting

(b) Date, Time and exact location of accident/incident

(c) Brief Narrative of accident/incident (Events leading to accident/incident)

(d) Cause of accident/incident, if known

(e) Estimated cost of accident/incident (material and labor to repair/replace)

(f) Nomenclature of equipment and personnel involved in accident/incident

(g) Corrective actions (taken or proposed)

(h) Other pertinent information

2. The contractor shall cooperate with any and all government mishap investigations. Additionally if requested by government personnel or designated government representative (GR), i.e., the ACO, PCO, or DCMA QAR (Quality Assurance Representative), the contractor shall immediately secure the mishap scene/damaged property and impound pertinent maintenance and training records, until released by safety investigators.

3. The contractor shall provide copies of contractor data related to mishaps, such as contractor analyses, test reports, summaries of investigations, etc. as necessary to support the government investigation.

4. The contractor shall support and comply with the safety investigation and reporting requirements of AFI 91-204, Chapters 1 – 5.

C. General Safety Requirements:

42

If the safety plan is modified, the contractor shall submit the proposed modification, in writing, to the Contract Administration Office safety representative.

The contractor is solely responsible for compliance with all federal, state and local laws, the Occupational, Safety and Health Act (OSHA) (Public Law 91-596) and the resulting standards, OSHA Standards 29 CFR 1910 and 1926, as applicable, and the protection of their employees. Additionally, the contractor is responsible for the safety and health of all subcontractor employees.

The contractor shall ensure assigned personnel are adequately trained and qualified for the task being performed. Brief all personnel on the hazards involved with operations and applicable precautions to be taken. Should unidentified hazards arise, cease operations until actions are taken to eliminate or mitigate hazards to safe levels.

Compliance with OSHA and other applicable laws and regulations for the protection of contractor employees is exclusively the obligation of the contractor. Note: Air Force Occupational Safety and Health Standards (AFOSH STD) are annotated because many of the Air Force Standards exceed the OSHA standard criteria. If a conflict is noted, the most stringent requirement takes precedence. The government shall assume no liability or responsibility for the contractor's compliance or non-compliance with such requirements. The contractor shall furnish to each of his/her employees a place of employment, which is free from recognized hazards. The contractor shall brief his/her employees on the safety requirements of this contract and on hazards associated with prescribed tasks. The contractor is responsible for compliance with OSHA Public Law and the resultant standards identified within. In addition, the contractor is required to flow down the safety requirements/specification to all subcontractors. This applies to Federal Acquisition Regulation (FAR) 12 commercial acquisitions as well. This contract shall in no way require persons to work in surroundings or under working conditions which are unsafe or dangerous to their health. The contractor must coordinate and perform work so as not to impact the safety of government employees or cause damage to government property. This requires providing personnel with protective equipment and associated safety equipment as may be necessary. The contractor must also protect personnel from hazards generated by the work. If the contractor employs BILINGUAL speaking employees, they must post bilingual signs and have written procedures for specific tasks in applicable languages.

SECTION II – SPECIFIC REQUIREMENTS

The contractor’s prepared Safety Plan shall:

• Demonstrate a management commitment to employee safety and health • Identify applicable rules and regulations • Identify the roles and responsibilities of Management, Supervisors, Employees and Safety Coordinator • Identify work to be performed and location of expected operations • Provide a description of safety program, safety monitoring responsibilities, organizational structure, and contact information for on-site personnel • Include a work hazard analysis of the worksite and operations to be performed to include baseline hazard identification and required control measures

http://www.osha.gov/pls/oshaweb/owasrch.search_form?p_doc_type=STANDARDS&p_toc_level=0

43

• Identify employee safety and health training requirements and the documentation process • Include emergency response plans and procedures that relate to protection of government personnel and property • Include a workplace inspection frequency, to include the identity of the individual responsible for conducting the inspection • Include hazard reporting procedures and identify individual(s) responsible for the correcting identified hazards • Identify first aid and injury procedures • Identify procedures for accident reporting and investigation • Identify the process for tracking controlled hazards in contractors work area

The contractor shall ensure that each element identified below is adequately addressed in detail in the safety and health plan: PEDESTRIAN CROSSWALKS: All contractor personnel are required to use the closest crosswalk, or traffic controlled intersection when crossing the road. Pedestrians must look both ways to ensure the coast is clear before stepping out into the crosswalk. Pedestrians DO NOT have the right of way unless they are already in the crosswalk. Contractor vehicle operators have the same responsibilities as pedestrians, to share the road and mutually observe and yield to pedestrians. MOTOR VEHICLES: Contractor shall comply with the standards in: DoD Directive 5525.4, Enforcement of State Traffic Laws on DoD Installations", 2 Nov 81, Change 1 (31 Oct 86), Para 3-4; DODI 6055.4, DoD Traffic Safety Program, 20 April 09, Change 2 (23 Jan 13); AFI 91-207, USAF Traffic Safety Program, 12 Sep 13; and AFI 91-207 AFMC SUP1, The US Air Force Traffic Safety Program, 11 Feb 14. Each applies to all persons at any time on an Air Force Installation and includes all leased, owned, or privatized property including housing areas. In addition: AFI 13-213, Airfield Driving, 1 Jun 11, Chap 3, applies to all contractors, sub-contractors, vendors, commercial delivery companies, and all other private business vehicles who operate anywhere on Hill Air Force Base, including the airfield (to include the industrial areas and any buildings or hangars located upon the airfield) in support of their mission. WALKING – WORKING SURFACES: Contractor shall comply with the standards in 29 CFR 1910 Subpart D and National Fire Protection Association (NFPA) 101, Life Safety Code. All interior walking and working surfaces which are part of the means of egress shall remain clear at all times and comply with the requirements of NFPA 101. Floors shall be kept in good condition and free of defects that can endanger workers or interfere with the handling of materials. Housekeeping – methods and controls are in place to minimize tripping hazards, the accumulation of flammable/combustible materials, etc. Portable metal ladders – methods and controls are in place to ensure inspection and safe use. Open-sided floors/platforms/runways must be protected and not left uncovered to prevent injury. PERSONAL PROTECTIVE EQUIPMENT: Contractor shall comply with the standards in 29 CFR 1910 Subpart I and 29 CFR 1926, 28, 95, 100, 101, 102, & 951. Personnel protective equipment is required to be worn when employees are exposed to a potential hazard, working overhead, falling objects, etc. Contractor’s Safety Plan shall also address:

- Eye and face protection

44

- Head protection - Foot Protection

HAZARDOUS COMMUNICATIONS: Contractor shall comply with the standards in 29 CFR 1910.1200. Contractor’s Safety Plan shall also address: - Written Program

- List of hazardous chemicals, methods used to inform employees of the hazards, precautionary measures - Identity of the hazardous chemical(s) and labeling system

- Material safety data sheets and location - Employee information and training

HAZARDOUS MATERIALS: Contractor shall comply with the standards in 29 CFR 1910 Subpart H – The handling and Storing of Hazardous Materials (chemicals, compressed air, acetylene, etc). When handling the hazardous material the following must be accomplished: Compressed gases – training, handling, storage, use, and PPE; flammable and combustible liquids – training, handling, storage use, and PPE. Contractor’s Safety Plan shall also address: - Training, handling, storage, use and PPE - Explosives and blasting agents - Dipping and coating operations HAZARDOUS WASTE OPERATIONS: Contractor shall comply with the standards in 29 CFR 1910.120 and 29 CFR 1926.65. Contractor’s Safety Plan shall also address: - Emergency Response Plan - Personal Protective Equipment - Medical Surveillance - Health and Safety Plan (HASP– required elements have been incorporated) - Employee Training TOXIC AND HAZARDOUS SUBSTANCES: Contractor shall comply with the standards in 29 CFR 1910 Subpart Z and 29 CFR 1926 Subpart Z. Contractor’s Safety Plan shall also address:

http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10117



45

- A section related to working with toxic and hazardous substances, such as asbestos, benzene, lead, and styrene, where the following areas are addressed: - Threshold Limit Values (TLV)-Exposure monitoring - Medical surveillance - Work practices - Engineering controls - Respiratory protection - Protective clothing (PPE)

SYSTEM MODIFICATION-WHICH ALTERS FORM, FIT OR FUNCTION: Contractor shall comply with MIL-STD-882E, Standard Practice for System Safety, 11 May 2012 and AFI 91-202, The US Air Force Mishap Prevention Program, 5 Aug 2011, for system modifications, which alter form, fit, or function. ELECTRICAL: Contractor shall comply with the standards in 29 CFR 1910 Subpart S, 29 CFR 1926 Subpart K, AFOSH STD 91-501, Air Force Consolidated Occupational Safety Standard, 7 Jul 04, Chap 8, and NFPA 70, National Electrical Code, 2014 Edition. All electrical wiring must be IAW National Electrical Code. Electrical wiring and equipment shall be a type listed by Underwriters Laboratories (UL) or another recognized listing agent. Contractor’s Safety Plan shall also address: - Selection and use of work practices - Training (basic electrical safety knowledge) - Use of equipment (handling, visual inspection, rating of equipment) - GFCI Protection for outside contractor drops and wet/damp areas - Arc Flash FIRE PROTECTION FOR FACILITIES: Contractor’s procedures shall comply with NFPA 10, Portable Fire Extinguishers, 2013 Edition; NFPA 13, Installation of Sprinkler Systems, 2013 Edition; NFPA 33, Spray Application Using Flammable or Combustible Materials, 2011 Edition; NFPA 70, National Electrical Code, 2014 Edition; NFPA 72, National Fire Alarm Code, 2013 Edition; NFPA 91, Exhaust Systems for Air Conveying of Vapors, Gases, Mists, and Noncombustible Particulate Solids, 2015 Edition. HAZARDOUS ENERGY CONTROL PROGRAM ELEMENTS (LOCKOUT-TAGOUT): Contractor shall comply with the standards 29 CFR 1910 Subpart S, 29 CFR 1926 Subpart K, AFI 91-203, Air Force Consolidated Occupational Safety Instruction, 15 Jun 12, Chap 21, and Hill AFB Instruction 91-302, Control Of Hazardous Energy (Lockout/Tagout). Contractor’s Safety Plan should also address:

- Purpose of hazardous energy control program - Employee training - Lockout/tagout procedures - Restoring equipment to normal operations - Removal of locks and tags - Periodic inspections



http://www.e-publishing.af.mil/shared/media/epubs/AFOSHSTD91-501.pdf

46

- Portable Fire Extinguishers – proper type, inspection, maintenance, testing, and training MATERIALS HANDLING AND STORAGE: Contractor shall comply with the standards in 29 CFR 1926.250, 953, 957; 29 CFR 1910.101, Subparts F, H & N; and 29 CFR 1910.178. Contractor’s Safety Plan shall also address: - Storage and handling of materials - Disposal of trash from elevations - Personnel lifting techniques--proper storage to prevent shifting, for stability, etc. - Rigging (requirements, inspection, components, and qualifications) - Equipment (use in handling materials) - Industrial trucks (training, inspection, maintenance, and safe use) CONFINED SPACE PROGRAM ELEMENTS: Contractor shall comply with the standards in 29 CFR 1910.120, 146; 29 CFR 1926.21, 353; and AFI 91-203, Air Force Consolidated Occupational Safety Instruction, 15 Jun 12, Chap 23. A confined space must meet the following three criteria: (1) Is large enough and so configured that an employee can bodily enter and perform assigned work (2) Has limited or restricted means for entry or exit (for example, tanks, vessels, silos, storage bins, hoppers, vaults, and pits are spaces that may have limited means of entry.) (3) Is not designed for continuous employee occupancy. Examples: underground vaults, tanks, storage bins, manholes, pits, silos, process vessels, and pipelines. Contractor’s Safety Plan shall address: - Hazards of confined space - Permit and Non-permit confined spaces - Responsibilities of management, entry supervisor, authorized entrant, and authorized attendants - Training requirements - Permit handling and approval - Emergency and rescue plans - Testing and monitoring requirements - Special hazards - Posting requirements (applicable to subcontractor operated facilities)





47

GENERAL ENVIRONMENTAL CONTROLS: Contractor shall comply with the standards in 29 CFR 1910 Subpart G, 29 CFR 1910 Subpart J and 29 CFR 1926 Subpart D. Contractor’s Safety Plan shall also address: - Sanitation-toilet and washing facilities - Accident prevention signs and tags RESPIRATORY PROTECTION PROGRAM ELEMENTS: Contractor shall comply with the standards in 29 CFR 1910.134 and 29 CFR 1926.103. Respirators are required to be worn if employees are exposed to inhalation hazard. Contractor’s Safety Plan shall also address: - Training - Medical evaluation - Fit tests - Selection of respiratory equipment - Storage of respiratory equipment - Pre-use checks HEARING CONSERVATION PROGRAM ELEMENTS: Contractor shall comply with the standards in 29 CFR 1910.95 and 29 CFR 1926.52. NOTE: Noise exposures are based on ACGIH guidelines of 85 dB TWA. Contractor’s Safety Plan shall also address: - Monitoring (survey of noise producing equipment) - Audiometric testing - Hearing Protectors - Training - Recordkeeping/Access to information and training material MEDICAL AND FIRST AID: Contractor shall comply with the standards in 29 CFR 1910 Subpart K and 29 CFR 1926 Subpart C. Contractor’s Safety Plan shall also address: - Adequate first aid supplies - Trained employee to render first aid - Recordkeeping - Reporting and investigating accidents/incidents











48

- Off-site physician(s) - Maintenance of and employee access to exposure monitoring data and medical records EXPLOSIVE SAFETY REQUIREMENTS: Contractor shall comply with the standards in AFMAN(I) 24-204, Preparing Hazardous Materials for Military Air Shipments, 3 Dec 12; and dash 11 series TOs; DoDI 4145.26M, DoD Contractors' Safety Requirements for Ammunition and Explosives, 13 Mar 08; AFI 23-101, Air Force Material Management, 08 Aug 13; TO 11A-1-33, Handling and Maintenance of Explosives-Loaded Aircraft, 20 Nov 08), TO 11A-1-46, Fire Fighting Guidance, Transportation, and Storage, 15 Nov 04 Change 6 (12 Nov 08) for all handling of all explosive devices to be removed, installed, stored or transported, AFMAN 91-201, Explosive Safety Standards, 12 Jan 11. FOREIGN OBJECT DAMAGE (FOD) Awareness, Prevention and Responsibilities: Contractor shall comply with the standards in: AFI 21-101 AFMC SUP 1, Aircraft and Equipment Maintenance Management, 26 Apr 12, paragraphs 14.19 - 14.19.10.1.13; National Aerospace Standard (NAS) 412, Foreign Object Damage/Foreign Object Debris (FOD) Prevention Program, Sep 13; AFI 91-203, Air Force Consolidated Occupational Safety Instruction, 15 Jun 12, Chap 24. The FOD program must be integrated into the day-to-day operations to reduce/eliminate FOD incidents. Programs will include covering waste dumpsters, waste hauling trucks, barriers in place to stop migrating FOD from dirt and gravel piles, and end of shift or daily clean-up. The contractor will brief their personnel at least weekly on any FOD requirements. All contractors, subcontractors performing maintenance in a FOD–potential area will receive and have documented initial FOD Awareness and Prevention training. All vehicle operators are responsible for performing a Foreign Object (FO) inspection on their vehicles including all towed equipment, vehicle tires and open cargo areas of vehicles prior to entering the marked runway, taxiway, flight line, and aircraft parking ramps and other areas as directed by the Installation FOD Awareness and Prevention Officer. All “open-air” delivery vehicles must be free of loose items/debris that could potentially fall from the vehicle and cause a FOD hazard. The cargo beds of pickups truck must be clean or covered prior to entering the airfield. Vehicles will be subject to inspection and denied entry if found unacceptable. Contractors and site/operations evaluators will ensure tools; equipment, rags, residue and hardware are properly stored and accounted for. “Clean as you go” methods are desired.