peb-3632vl2a - portwelldrivers.portwell.com/ipc_manual/peb/peb-3632/peb-3632vl2a_user... · the...

Preface

PEB-3632VL2A

Embedded System Board

User’s Manual

P/N: Copyright © Portwell, Inc., 2003 All rights reserved.

All other brand names are registered trademarks of their respective owners.

PEB-3632VL2A User’s Manual

Preface

Table of Contents How to Use This Manual

Chapter 1 Introduction ...............................................................................................................1-1 Manual Objectives................................................................................................................................ 1-1 1.1 Check List .............................................................................................................................. 1-2 1. 2 Product Specifications............................................................................................................ 1-3

1.2.1 General Functions ........................................................................................................... 1-3 1.2.2 CRT/LCD Interface ........................................................................................................ 1-4 1.2.3 Ethernet Interface............................................................................................................ 1-4 1.2.4 SSD Interface.................................................................................................................. 1-4 1.2.5 Expansion Interface ........................................................................................................ 1-4 1.2.6 Connectors ...................................................................................................................... 1-4 1.2.7 Mechanical and Environmental ...................................................................................... 1-5

1.3 System Architecture ............................................................................................................... 1-6 1.3.1 Chipset ............................................................................................................................ 1-6 1.3.2 CPU................................................................................................................................. 1-6 1.3.3 Main Memory ................................................................................................................. 1-6 1.3.4 System BIOS................................................................................................................... 1-6 1.3.5 AGP Graphics controller................................................................................................. 1-6 1.3.6 Audio .............................................................................................................................. 1-7 1.3.7 Ethernet ........................................................................................................................... 1-7 1.3.8 IDE Interface................................................................................................................... 1-7 1.3.9 Winbond W83637HF...................................................................................................... 1-7 1.3.10 USB ................................................................................................................................ 1-8

Chapter 2 Hardware Configuration Setting..............................................................................2-1 2.1 Jumper Setting........................................................................................................................ 2-2


Preface

How to Use This Manual The manual describes how to configure your PEB-3632VL2A system to meet various operating requirements. It is divided into four chapters, with each chapter addressing a basic concept and operation of Embedded Board Computer. Chapter 1: Introduction. This chapter presents what you have in the inside of box and give you an overview of the product specifications and basic system architecture for this model of single board computer.

Chapter 2: Hardware Configuration Setting. This chapter shows the definitions and locations of Jumpers and Connectors that you can easily configure your system.

The content of this manual and EC declaration document is subject to change without prior notice. These changes will be incorporated in new editions of the document. Portwell may make supplement or change in the products described in this document at any time. Updates to this manual, technical clarification, and answers to frequently asked questions will be shown on the following web site: http://isc.portwell.com.tw


http://www.portwell.com.tw/

Introduction

Chapter 1 Introduction Manual Objectives

This manual describes in detail the Portwell PEB-3632VL2A Embedded System Board. This manual aims to provide all necessary information to users who may interest in using all PEB-3632VL2A’s functions. Please be aware that it is possible to create configurations within the CMOS RAM that make booting impossible. If this should happen, clear the CMOS settings, (see the description of the Jumper Settings for details). We strongly recommend that you study this manual carefully before attempting to alter PEB-3632VL2A’s configurations. In the case, something in this manual is not clear or users have any suggestion on this manual. Contact our Customer Service department with the relevant details. Portwell Technical Service Group’s web site is http://isc.portwell.com.tw/.

Introduction

PEB-3632VLA is Portwell’s answer to the growing embedded computing market. This Intel 815E based embedded system platform provide innovative, low power consumption, high quality Compact sized embedded computing board to wide range embedded application. The board is based on Intel 815E chipset and low power Intel Tualatin LV Pentium III and ULV Celeron processor, running at 800/933Mhz (Pentium III) with 133Mhz FSB or Celeron 400/650Mhz with 100Mhz FSB make PEB-3632VL2A to be the highest performance board in low power embedded system board arena. The Intel 815E that integrate AGP 4X graphic with CRT/Panel display (DVI) support function enable Portwell’s PEB-3632VLA to provide most versatile and multi-media performance rated embedded system solution for both Multi-media transaction terminal/POS/POI or high performance network appliance in the market.

All in all, PEB-3632VL2A was designed to meet compact size and durable embedded computing application. Not only for network equipment or Internet appliance but also for those man-machine interface for Industrial control, Medical and transaction terminal that need LCD support or Multi-media computing platform.

PEB-3632VL2A User’s Manual 1-1

http://isc.portwell.com.tw/

Introduction

1.1 Check List The PEB-3632VL2A package includes the following basic items accompany with this manual.

1 PEB-3632VL2A All-in-One Pentium III 800/933 or Celeron 400/650 Computing Module

1 Quick Installation Guide

1 CD-ROM contains the followings: - User’s Manual (this manual in PDF file) - Ethernet driver and utilities - VGA drivers and utilities - Latest BIOS (as of the CD-ROM was made)

Cable set includes the followings: - 1 PS/2 keyboard and mouse Y cable (10-pin, pitch 2.0mm) - 1 IDE HDD cable (40-pin, pitch 2.54mm) - 1 FDD cable (34-pin, pitch 2.54mm) - 1 bracket with one Printer port cable (26-pin, pitch 2.0mm) and one Serial port

cable (10-pin, pitch 2.0mm) - 1 bracket with two serial port cable (10-pin, pitch 2.0mm) - 1 bracket with two USB port cable (10-pin, pitch 2.54mm) - 1 bracket with VGA port cable (10-pin, 2.54mm) - 2 Ethernet port cable (10-pin, pitch 2.54mm) - 2 audio jack cable - 1 ATX-Power cable

If any of these items is damaged or missed, please contact your vendor and save all packing materials for future replacement and maintenance.


Introduction

1. 2 Product Specifications 1.2.1 General Functions Main processor

Intel low voltage Pentium III processor 800/933 MHz or ULV Celeron 400/650 MHz BIOS

Award (4Mb Flash ROM) Chipset

Intel 815E I/O Chipset

Winbond W83627HF Memory

Up to 512 MB SDRAM on one 168-pin DIMM socket Enhanced IDE

Two channels support up to four EIDE devices FDD interface

Supports 360KB, 720KB, 1.2MB, 1.44MB and 2.88MB Floppy Disk interface up to two drivers

Parallel port Interface for one parallel port. Supports SPP, ECP, and EPP modes

Serial port Supports two serial ports for UART (pin connector). Com2 supports RS-232/422/485 (selectable)

KB/Mouse connector One internal header PS2 Keyboard/Mouse connector

USB connectors Supports four USB ports. USB 1.1 compliant

Watchdog Timer Adjustable via software with internal resolution setting from 0.5 sec to 254.5 min

DMA 7 DMA channels (8237 equivalent)

Interrupt 15 interrupt levels (8259 equivalent)

Power management I/O peripheral devices support power saving and doze/standby/suspend modes. APM 1.2 compliant.


Introduction

1.2.2 CRT/LCD Interface Chipset

Intel 815E

Display memory Shared display memory up to 4MB

Display type Supports CRT and TMDS panel

Resolution Analog display: 1600x1200 @ 85Hz with 8bpp; DVI display: 1600x1200 @85Hz with 16bpp

1.2.3 Ethernet Interface Chipset

Intel 82551ER or Intel 82540 optional

Ethernet interface Intel 82551ER supports 10/100Base-T; Intel 82540 supports Giga Base with LED indicators

1.2.4 SSD Interface Type II Compact Flash socket (supports 8~320MB Compact Flash or IBM

Microdrive) 1.2.5 Expansion Interface One PCI and one mini-PCI (optional)

1.2.6 Connectors External connectors: 1-VGA, 2-COM, 2-IDE, 1-FDD, 1-LPT, 4-USB, 2-Ethernet

Power connectors: Big4 type, ATX connector


Introduction

1.2.7 Mechanical and Environmental Power supply voltage: +5V (+4.75V to +5.25V)

Typical power requirement: 5V @ 3.401A w/ Celeron650

Operating temperature: 32 to 140°F (0 to 55°C)

Storage temperature: -20 to 75°C

Relative humidity: -20 to 75°C

Board size: 102mm x 145mm (5.25” EBX form factor)


Introduction

1.3 System Architecture 1.3.1 Chipset 815E

GMCH Integrated Direct AGP graphics core support CRT/LCD 1.3.2 CPU Intel Tualatin LV Pentium III with FSB133Mhz or ULV Celeron with FSB100Mhz

processor

512KB L2 cache memory on die 1.3.3 Main Memory One 168-pin DIMM socket Support 3.3V SDRAM up to 512MB 16/64/128 Mbit DRAM technology

1.3.4 System BIOS Award or AMI BIOS with PC’98 support 4Mbit (512KB) flash ROM for easy upgrade Support DMI, PnP, power management and ACPI (default support)

1.3.5 AGP Graphics controller Analog display: 1600x1200 @ 85Hz with 8bpp (2D graphic) Digital display: 1600x1200 @ 85Hz with 16bpp (4:3) AGP CRT/LCD interface support for up to 36bit TFT and 24bit DSTN panel 4MB external display cache (nice to have) Intel TMDS Support dynamic shared system SDRAM for display cache (100Mhz

SDRAM interface) 3D Hyper Pipelined Architecture Motion Video Acceleration


Introduction

Optional TV out function 1.3.6 Audio

Integrated AC-97 CODEC

Connector for MIC/Line in/out (pin connector) 1.3.7 Ethernet

Intel 82551/82540 and Real RTL 8139C co-layout

Support 10/100 Base-T and RJ-45 Jack with LED indicators

I/O address jump less setting

Built-in boot ROM 1.3.8 IDE Interface

Two channels support up to four EIDE devices

Primary channel Support one enhanced IDE channel up to two HDDs with PIO mode 4, Ultra DMA/33/66/100 and Bus master feature.

Secondary channel can support one Compact Flash (IDE interface ) 1.3.9 Winbond W83637HF The Winbond W83637-a Super I/O chip provides most input / output interfaces of the system as the following: Support 360KB, 720KB, 1.2MB, 1.44MB and 2.88MB Floppy Disk interface up to

two drivers

Support four serial ports for UART (pin connector). Two Serial ports (Com 1, Com 2), one RS232/RS-422/RS-485 (Com 2,selectable)

Parallel port support SPP/EPP/ECP (pin connector)

Support voltage, temperature and FAN monitoring

Support Watch-Dog Timer

Reserved 4pin digital I/O for control


Introduction

1.3.10 USB

Support two USB port Additional two USB port (optional) USB 1.1 compliant

1.3.11 CPU Heat sink & Fan Try to implement fan less design Heat sink cannot higher than standard DIMM module Reserved mounting design for heat sink and Fan installation Support one 3-pin header with wafer or only use heat sink

The following block diagram shows the architecture and main components of PEB-3632VL2A.

40 pin DISK IDE

SUPER I/O

KEYBOARD CONTROLLER

K/B

LPC BUS

PCI

551/540

Tualatin LP

HUB

40 pin DISK IDE

PCI BUS INTERFACE

Pentium(R) III

W83627HF

SD-RAM

CACHE

AC'97 LINK INTERFACE

FirmWare

551/540

INTEL

S-VIDEO

PROCESSOR

CRT

ULTRA DMA IDE INTERFACE

USB INTERFACE

TV_OUT

ADI

MEMORY

CVBS

VOLTAGEREGULATORMODULE

SLOT

GMCH

SERIAL

M/S

SCART(RGB)

CHRONTEL

AD1881A

PowerGoodCircultry

MINI_PCI

TMDS

SERIAL

CPUDECOUPLING

ICH2

Damping &strappingOptions

USB 2~3

PARALLEL

LCD MODE

FLOPPY

INTEL

LAN1USB 0~1

DISPLAY CACHE INTERFACE

CH7009

LAN2

IrDA

MEM INTERFACED I M M

82802AB

Figure 1-1 PEB-3632VL2A System Block Diagram


AWARD BIOS Setup

Chapter 2 Hardware Configuration Setting

Figure 2-1 PEB-3632VL2A Jumper and Connector Locations


AWARD BIOS Setup

2.1 Jumper Setting The jumper settings are schematically depicted in this manual as follows:

Jumper Table

Jumper Reference Function Descriptions

JP1 5V-Only FAN JP2 Power Control Jump JP3 CMOS Clear Jump JP4 Standard FAN JP5 ATX/AT Power Supply selection

JP6/JP7 Ethernet LED JP9 TV-OUT MODE Jump J4 Serial Port Mode Selection (RS232/422/485) D5 Power / HD LED

JPP2 System Button Jump JJP22

JPP3 RTC CMOS Clear Jumper Setting JJP33

Note :1. The “ * ” mark for default setting JPP5 ATX/AT Power Jump JJP55

Pin Define Setting Function 1,2 AT 1-3,2-4 If Short AT * 3,4 Select Command Point 5,6 ATX 3-5,4-6 If Short ATX

Note : 1. The “ * “ mark for default setting JPP9 TV/DVI Mode Jump JJP99

Pin Define ON OFF 1,2 Mode TV-MODE* DVI_MODE

Pin Define Setting Function 1,2 Power Button Open Short Normal Power ON 3,4 Reset Button Open Short Normal Reset 5,6 WDT Function Open Short Disable Enable 7,8 I2C Interface Open Connect Disable Enable

Pin Define Setting Function 1 Ground 1-2 Short Clear CMOS Enable 2 Reset Command Point 3 Resume 2-3 Short Clear CMOS Disable*


AWARD BIOS Setup

3,4 Type NTSC PAL 5,6 Access 0X75 0X76

J44 Communication Serial COM2 Port Jumper Setting JJ4

J4 Function

5-6,9-11,10-12,15-17,16-18, Short RS-232 * 3-4,7-9,8-10,13-15,14-16,21-22 Short RS-422 1-2,7-9,8-10,19-20 Short RS-485

Note : 1. The “ * “ mark for default setting D5 Power LED & HD LED DD55

Pin Function Descriptions

1-2 Power LED Function

3-4 HD LED Function

Connector Table Connector Reference Function Descriptions

J1 PS/2 KB & MS Connector (2mm) J2 168 Pin DIMM SDRAM SOCKET Connector J3 Serial Port 2 x 5 shrouded Connector (COM2)-RS232/422/485 J5 Parallel port Connector J6 Standard Power Connector (Big 4 Pin) J7 Serial Port 2 x 5 shrouded Connector (COM1)-RS232 J8 IrDA Connector J9 Floppy disk Connector

J10 Secondary IDE Interface Connector J11 Primary IDE Interface Connector J12 Reserved 4 Pin GPIO Connector J13 Standard PCI SLOT J14 ATX power control Connector J15 MINI PCI Connector J16 CRT Connector J17 Flat panel Display Interface （TMDS）

J18/J19 Ethernet RJ-45 Interface Connector J20/J21 USB Interface Connector

J22 Audio (LINE_OUT/ LINE_IN) Interface Connector J23 Audio (CD_IN/ MIC_IN) Interface Connector J24 Panel’s invert Connector


AWARD BIOS Setup

J25 COMPACT FLASH CARD (Type III) Interface Connector

J11 PS/2 Keyboard/Mouse Connector JJ1

Pin Assignment Pin Assignment 1 MS DATA 6 KB DATA 2 N/C 7 N/C 3 GND 8 GND 4 MS CLOCK 9 KB CLOCK 5 PWR 10 PWR

J22 168 Pin DIMM SDRAM SOCKET Connector JJ2

One 168-pin DIMM socket and up to 512MB SDRAM ( Using 3.3V 16-/64-/128-Mb technology )

J33 Communication Serial Port (RSR-232/422/485) COM2 Connector JJ3

J55 Parallel Port Interface Connector JJ5

Pin No. Signal Description Function RS-232 RS-422 RS-485

1 DCD (Data Carrier Detect) TX- DATA- 2 RXD (Receive Data) TX+ DATA+ 3 TXD (Transmit Data) RX+ N/C 4 DTR (Data terminal Ready) RX- N/C 5 GND (Ground) GND GND 6 DSR (Data Set Ready) N/C N/C 7 RTS (Request to Send) N/C N/C 8 CTS (Clear to Send) N/C N/C 9 RI (Ring Indicator) N/C N/C

10 N/C N/C N/C

Pin Assignment Pin Assignment 1 Strobe# 14 Auto Form Feed# 2 Data 0 15 Error# 3 Data 1 16 Initialization# 4 Data 2 17 Printer Select IN# 5 Data 3 18 Ground 6 Data 4 19 Ground 7 Data 5 20 Ground 8 Data 6 21 Ground 9 Data 7 22 Ground

10 Acknowledge# 23 Ground 11 Busy 24 Ground 12 Paper Empty 25 Ground 13 Printer Select 26 N/C


AWARD BIOS Setup

J66 Standard Power Connector ( BIG 4 PIN ) JJ6

J77 Communication Serial Port (RSR-232) COM1 JJ7

J88 IrDA Pin Header JJ8

J99 Floppy Disk Interface JJ9

Pin Assignment Pin Assignment 1 +12V 3 GND 2 GND 4 +5V

Pin Assignment Pin Assignment 1 DCD 6 DSR 2 RX 7 RTS 3 TX 8 CTS 4 DTR 9 RIN 5 Ground 10 NC

Pin Assignment Pin Assignment 1 VCC 4 GND

2 NC 5 TX

3 RX 6 NC

Pin Assignment Pin Assignment 1 GND 2 Density Select 0 3 GND 4 N/C 5 GND 6 Density Select 1 7 GND 8 Index# 9 GND 10 Motor ENA#

11 GND 12 Drive Select B# 13 GND 14 Drive Select A# 15 GND 16 Motor ENB# 17 GND 18 Direction# 19 GND 20 Step# 21 GND 22 Write Data# 23 GND 24 Write Gate# 25 GND 26 Track 0# 27 GND 28 Write Protect# 29 NC 30 Read Data# 31 GND 32 Head Select# 33 NC 34 Disk Change#

J11000///J11 IDE0/IDE1 Interface JJ1 JJ1111


AWARD BIOS Setup

J11333 PCI SLOT JJ1

One 124-pin PCI Standard solt

J11444 ATX power control JJ1

J11666 On-board VGA DSUB-15 Connector JJ1

Pin Assignment Pin Assignment 1 Reset# 2 Ground 3 Data 7 4 Data 8 5 Data 6 6 Data 9 7 Data 5 8 Data 10 9 Data 4 10 Data 11

11 Data 3 12 Data 12 13 Data 2 14 Data 13 15 Data 1 16 Data 14 17 Data 0 18 Data 15 19 Ground 20 N/C 21 DMA REQ 22 Ground 23 IOW# 24 Ground 25 IOR# 26 Ground 27 IOCHRDY 28 Pull Down 29 DMA ACK# 30 Ground 31 INT IRQ14 32 N/C 33 SA1 34 Detect Pin 35 SA0 36 SA2

37 HDC CS0# 38 HDC CS1# 39 ACTIVE 40 Ground

Pin Assignment 1 POWER_OK 2 ATX5VSB 3 PWR_ON# 4 GND

Pin Assignment Pin Assignment 1 RED 2 CLOCK 3 GREEN 4 GND 5 BLUE 6 DATA 7 VSYNC 8 GND 9 HSYNC 10 N/C

J11777 TMDS Panel Display Connector JJ1


AWARD BIOS Setup

J22000///J21 USB Port Pin Define JJ2 JJ2211

J22222 LINE-IN and LINE-OUT Interface Connector JJ2

J22333 CD-ROM LINE-IN and MIC-IN Interface Connector JJ2

J22444 Panel’s invert Connector JJ2

Pin Assignment Pin Assignment 1 TMDS TX1+ 2 TMDS TX2+ 3 TMDS TX1- 4 TMDS TX2-

5 GND 6 GND

7 GND 8 GND

9 TMDS TXC+ 10 TMDS TX0+

11 TMDS TXC- 12 TMDS TX0-

13 GND 14 GND

15 VCC 16 Hot Plug Detect

17 VCC 18 DVI DDC DATA

19 VCC 20 DVI DDC CLK

Pin Assignment Pin Assignment 1 USB0VCC 2 N/C 3 USBD0- 4 USBGND 5 USBD0+ 6 USBD1+ 7 USBGND 8 USBD1- 9 N/C 10 USB1VCC

Pin Assignment Pin Assignment 1 LINE_OUT_R 4 LINE_IN_R 2 GND 5 GND 3 GND 6 GND 4 LINE_OUT_L 8 LINE_IN_L

Pin Assignment Pin Assignment 1 CD_R 5 MIC_IN 2 GND 6 GND 3 GND 7 GND 4 CD_L 8 VREFOUT

Pin Assignment Pin Assignment 1 +12V 4 GND 2 +12V 5 GND 3 Enable/Disable Pin 6 VR


AWARD BIOS Setup

J22555 Compact Flash Socket JJ2

Pin Assignment Pin Assignment 1 Ground 26 Pull Low 2 Data 3 27 Data 11 3 Data 4 28 Data 12 4 Data 5 29 Data13 5 Data 6 30 Data 14 6 Data 7 31 Data 15 7 HDC CS0# 32 HDC CS1# 8 Ground 33 Ground 9 Output Enable 34 IOR#

10 Ground 35 IOW# 11 Ground 36 Write Enable 12 Ground 37 IRQ 13 +5V 38 +5V 14 Ground 39 N/C 15 Ground 40 N/c 16 Ground 41 RESET# 17 Ground 42 IORDY 18 HDC SDA2 43 N/C# 19 HDC SDA1 44 Pull High 20 HDC SDA0 45 HDC ACT# 21 Data 0 46 Pull High 22 Data 1 47 Data 8 23 Data 2 48 Data 9 24 N/C 49 Data 10 25 Pull Down 50 Ground


peb-3632vl2a - portwelldrivers.portwell.com/ipc_manual/peb/peb-3632/peb-3632vl2a_user... · the...

Documents