panplast product specifications
DESCRIPTION
PRODUCT SPECIFICATIONSTRANSCRIPT
Round Drip Irrigation Pipes• Easy and safe usage, appropriate for culturing many years.• Produced from high-quality original raw material.• In it added material providing resistency to Uv rays.• With the smooth inner layer it provides longer inlaying chance.• It is resistant to on going usual regathering and montage. • Thanks to specialy designed drippers it has the minimum risk for being chocked.• Drippers are placed into pipes during the production.• In the drippers are two water exits.
Technical Features• Panplast Round Drip Irrigation Pipes, in 1 atm pressure, nominal flow rate are 2-4 lt/h.• Maximum working pressure is 2 atm.• Nominal inside diameter is 13.80 mm.• Wall Thickness of pipes are 0,7 mm – 0,9 mm- 1,0mm - 1,1 mm - 1,2mm.
Ø16mm Round DripPressure-Flow Rate Table
Pressure Flow RateBar 2 lt/h 4 lt/h
0,5 1.36 2.77
1,0 1.97 3.88
1,5 2.41 4.76
2,0 2.79 5.46
2,5 3.08 6.11
Ø16 mm Round Drip Irrigation Pipes
Factory : Panplast Irrigation Systems Konya-Ankara Yolu Üzeri, Yeşilöz Mah. Acıkuyu Mevkii Cihanbeyli KONYA /TURKEY
Tel : +90 (332) 673 21 47 • 673 30 03 • 673 30 05 • 673 30 09 • 673 19 68Fax : +90 (332) 673 19 67
web: www.panplast.com.tr e-mail : [email protected]
Ø 16mm Round Drip Pressure-Flow Rate Chart
Flow
Rat
e lt/
h
Ø 16 ROUND DRIP IRRIGATION PIPE 2 lt/h LENGTHENING SPACE TABLE
Dripper spaces ( cm )
Lateral lenght
Flow Rate Change
( % )
Withoutslope Down Slope Above Slope
0% 1% 2% 3% 1% 2% 3%
20
10 46 49 52 54 43 39 36
15 55 57 60 62 52 49 46
20 62 65 67 69 60 57 54
25
10 54 58 62 65 49 45 41
15 64 68 71 75 60 56 52
20 74 77 80 83 70 66 62
33
10 66 72 78 83 59 53 47
15 79 84 89 94 73 67 61
20 90 95 100 104 84 79 74
40
10 76 84 91 97 67 58 51
15 90 98 104 110 82 75 68
20 104 110 116 122 96 89 82
50
10 90 101 110 119 77 66 56
15 107 117 125 133 96 85 76
20 122 131 139 147 112 102 93
60
10 103 116 128 139 86 71 59
15 122 134 145 156 107 94 82
20 139 151 161 171 125 113 101
75
10 121 140 155 171 98 79 64
15 143 161 176 190 123 105 90
20 164 179 194 207 145 128 113
100
10 149 177 201 222 115 88 69
15 177 202 225 247 146 121 99
20 202 226 247 268 174 149 128
Ø 16 ROUND DRIP IRRIGATION PIPE 4 lt/h LENGTHENING SPACE TABLE
Dripper spaces ( cm )
Lateral lenght
Flow Rate Change
( % )
Withoutslope Down Slope Above Slope
0% 1% 2% 3% 1% 2% 3%
20
10 30 31 33 34 29 27 26
15 36 37 38 39 35 33 32
20 41 41 43 44 40 39 38
25
10 36 37 39 40 34 32 30
15 42 44 45 47 41 39 37
20 48 50 51 52 47 45 44
33
10 44 46 48 51 41 38 35
15 52 54 56 58 49 47 44
20 59 61 63 65 57 55 52
40
10 50 53 56 59 46 42 39
15 60 62 65 68 56 53 50
20 68 71 73 76 65 62 59
50
10 59 64 68 72 54 49 44
15 70 74 78 82 66 61 57
20 80 84 88 91 76 72 68
60
10 67 73 79 83 60 54 48
15 80 85 90 95 74 68 62
20 91 97 101 105 86 80 75
75
10 79 87 95 101 70 61 53
15 94 101 108 114 86 78 71
20 107 114 121 126 100 92 86
100
10 98 110 120 130 83 71 60
15 116 127 137 146 103 92 81
20 133 143 152 160 121 110 100
Round Drip Irrigation Pipes
Factory : Panplast Irrigation Systems Konya-Ankara Yolu Üzeri, Yeşilöz Mah. Acıkuyu Mevkii Cihanbeyli / KONYA /TURKEYTel : +90 (332) 673 21 47 • 673 30 03 • 673 30 05 • 673 30 09 • 673 19 68Fax : +90 (332) 673 19 67 web: www.panplast.com.tr e-mail : [email protected]
Ø20mm Round DripPressure-Flow Rate Table
Pressure Flow rateBar 2 lt/h 4 lt/h 6 lt/h
0,5 1.36 2.85 4.89
1,0 2.02 4.02 6.29
1,5 2.50 5.03 7.47
2,0 2.97 5.81 8.58
2,5 3.23 6.51 9.63
Round Drip Irrigation Pipes• Easy and safe usage, appropriate for culturing many years.• Produced from high-quality original raw material.• In it added material providing resistency to Uv rays.• With the smooth inner layer it provides longer inlaying chance.• It is resistant to on going usual regathering and montage. • Thanks to specialy designed drippers it has the minimum risk for being chocked.• Drippers are placed into pipes during the production.• In the drippers are two water exits.
Technical Features• Panplast Round Drip Irrigation Pipes, in 1 atm pressure, nominal flow rate are 2-4-6 lt/h.• Maximum working pressure is 2 atm.• Nominal inside diameter is 17.6 mm.• Wall Thickness of pipes are 1,0mm – 1,2mm.
Ø20 mm Round DripIrrigation Pipes
Ø 20mm Round Drip Pressure-Flow Rate Chart
Flow
Rat
e lt/
h
Factory : Panplast Irrigation Systems Konya-Ankara Yolu Üzeri, Yeşilöz Mah. Acıkuyu Mevkii Cihanbeyli KONYA /TURKEY
Tel : +90 (332) 673 21 47 • 673 30 03 • 673 30 05 • 673 30 09 • 673 19 68Fax : +90 (332) 673 19 67
web: www.panplast.com.tr e-mail : [email protected]
Ø 20 ROUND DRIP IRRIGATION PIPE 2 lt/h LENGTHENING SPACE TABLE
Dripper spaces ( cm )
Lateral lenght
Flow Rate Change
( % )
Withoutslope Down Slope Above Slope
0% 1% 2% 3% 1% 2% 3%
20
10 69 77 84 90 60 51 44
15 82 89 95 102 73 66 59
20 93 100 106 112 85 78 71
25
10 81 92 101 110 68 57 48
15 96 106 115 123 85 74 65
20 109 119 127 135 99 89 80
33
10 99 115 129 143 80 64 52
15 118 132 145 158 101 86 73
20 134 148 160 172 118 104 91
40
10 114 135 153 171 89 69 54
15 135 154 172 188 113 94 78
20 154 172 188 204 133 115 99
50
10 134 163 188 210 101 75 57
15 159 186 209 225 129 104 84
20 181 206 228 252 153 129 108
60
10 153 190 222 248 110 79 58
15 182 215 246 266 142 111 87
20 207 238 268 281 170 140 115
75
10 180 230 280 304 122 83 60
15 214 260 302 327 161 119 92
20 243 287 328 342 194 153 122
100
10 222 296 328 364 137 87 62
15 264 332 364 392 185 130 96
20 300 365 400 415 226 170 131
Ø 20 ROUND DRIP IRRIGATION PIPE 4 lt/h LENGTHENING SPACE TABLE
Dripper spaces ( cm )
Lateral lenght
Flow Rate Change
( % )
Withoutslope Down Slope Above Slope
0% 1% 2% 3% 1% 2% 3%
20
10 48 51 54 57 44 41 37
15 57 60 63 65 54 50 47
20 65 68 70 73 62 59 56
25
10 56 61 65 68 51 46 42
15 67 71 75 78 62 58 54
20 77 80 84 87 72 68 64
33
10 69 76 81 87 61 54 48
15 82 88 93 98 75 69 63
20 93 99 104 109 87 81 76
40
10 79 88 95 102 69 60 52
15 94 102 109 116 85 77 69
20 108 115 121 128 99 92 84
50
10 93 105 115 125 80 67 57
15 111 122 131 140 99 87 77
20 127 137 146 154 115 105 95
60
10 106 122 134 147 89 73 60
15 127 140 152 164 110 96 83
20 145 157 169 179 130 116 104
75
10 125 146 164 181 101 80 65
15 149 168 185 200 127 107 91
20 170 188 203 218 150 131 116
100
10 155 185 211 239 118 89 69
15 184 212 236 261 151 123 100
20 210 236 259 283 179 153 130
Ø 20 ROUND DRIP IRRIGATION PIPE 6 lt/h LENGTHENING SPACE TABLE
Dripper spaces ( cm )
Lateral lenght
Flow Rate Change
( % )
Withoutslope Down Slope Above Slope
0% 1% 2% 3% 1% 2% 3%
20
10 39 41 42 44 37 35 33
15 47 48 50 51 45 43 41
20 54 55 56 58 52 53 49
25
10 46 48 51 53 43 41 38
15 55 57 59 61 53 50 48
20 63 65 67 69 61 59 57
33
10 56 60 63 66 52 48 45
15 67 70 73 76 64 60 57
20 77 80 83 85 74 71 67
40
10 65 69 73 77 59 54 50
15 77 82 85 89 72 68 64
20 89 92 96 99 84 80 76
50
10 76 83 88 93 69 62 56
15 91 97 102 107 85 78 72
20 105 110 115 119 99 93 87
60
10 87 95 102 109 77 68 61
15 104 111 118 124 95 87 80
20 119 126 132 137 112 104 97
75
10 102 113 123 132 89 77 67
15 122 132 141 149 110 100 89
20 140 149 158 165 130 119 110
100
10 126 143 157 170 106 89 71
15 151 166 179 191 133 117 102
20 173 187 199 210 157 142 128
Round Drip Irrigation Pipes
Factory : Panplast Irrigation Systems Konya-Ankara Yolu Üzeri, Yeşilöz Mah. Acıkuyu Mevkii Cihanbeyli / KONYA /TURKEYTel : +90 (332) 673 21 47 • 673 30 03 • 673 30 05 • 673 30 09 • 673 19 68Fax : +90 (332) 673 19 67 web: www.panplast.com.tr e-mail:[email protected]
Ø16mm Flat DripPressure-Flow Rate Table
Pressure Flow RateBar 1,0 lt/h 1,6 lt/h 2,0 lt/h 2,5 lt/h
0,5 0.87 1.27 1.37 1.70
1,0 1.24 1.71 2.00 2.54
1,5 1.57 2.08 2.45 3.10
2,0 1.82 2.51 2.83 3.58
2,5 2.04 2.79 3.14 4.02
Flat Drip Irrigation Pipes• Easy and safe usage, appropriate for culturing many years.• Produced from high-quality original raw material.• In it added material providing resistency to Uv rays.• With the smooth inner layer it provides longer inlaying chance.• It is resistant to on going usual regathering and montage. • Thanks to specialy designed drippers it has the minimum risk for being chocked.• Drippers are placed into pipes during the production.• In the drippers are one water exits.
Technical Features• Panplast Flat Drip Irrigation Pipes are produced to wall thickness Ø 16mm in pipes; 6mil – 7mil- 8mil – 10mil – 12mil - 16mil - 18mil and Ø 22mm in pipes; 8mil – 10mil – 12mil - 16mil - 18mil.• In 1 atm pressure, nominal flow rate are 1,0 - 1,6 - 2,0 - 2,5 lt/h.• Maximum working pressure is 2 atm.• Wall Thickness of pipes are between 0,15mm - 0,45mm.
Ø 16 mm FlatDrip Irrigation Pipes
Ø 16mm Flat Drip Pressure-Flow Rate Chart
Flow
Rat
e lt/
h
Factory : Panplast Irrigation Systems Konya-Ankara Yolu Üzeri, Yeşilöz Mah. Acıkuyu Mevkii Cihanbeyli KONYA /TURKEY
Tel : +90 (332) 673 21 47 • 673 30 03 • 673 30 05 • 673 30 09 • 673 19 68Fax : +90 (332) 673 19 67
web: www.panplast.com.tr e-mail : [email protected]
Ø 16 FLAT DRIP IRRIGATION PIPE 1,0 lt/h LENGTHENING SPACE TABLE
Dripper spaces ( cm )
Lateral lenght
Flow Rate Change
( % )
Withoutslope Down Slope Above Slope
0% 1% 2% 1% 2%
20
7,5 77 88 98 64 52
10 87 97 106 74 63
15 103 113 121 92 82
25
7,5 91 106 119 72 57
10 102 116 129 85 70
15 121 134 146 106 92
30
7,5 104 123 140 80 61
10 116 135 151 94 76
15 138 155 170 119 101
40
7,5 128 156 181 92 66
10 143 171 194 110 84
15 170 196 218 141 116
50
7,5 150 190 210 103 70
10 169 206 239 124 91
15 201 235 265 160 127
60
7,5 171 222 245 110 73
10 193 241 276 135 95
15 229 273 313 177 136
Ø 16 FLAT DRIP IRRIGATION PIPE 2,0 lt/h LENGTHENING SPACE TABLE
Dripper spaces ( cm )
Lateral lenght
Flow Rate Change
( % )
Withoutslope Down Slope Above Slope
0% 1% 2% 1% 2%
20
7,5 58 65 70 51 44
10 66 72 77 59 52
15 78 83 88 72 66
25
7,5 68 77 85 58 49
10 77 85 93 68 59
15 92 99 106 83 75
30
7,5 78 90 99 65 53
10 88 99 108 76 65
15 105 114 123 94 83
40
7,5 96 113 127 76 60
10 108 124 138 90 74
15 129 144 156 112 98
50
7,5 114 137 156 86 65
10 128 149 168 102 81
15 152 172 189 129 109
60
7,5 130 159 184 95 68
10 146 173 197 113 86
15 173 199 221 144 118
Ø 16 FLAT DRIP IRRIGATION PIPE 1,6 lt/h LENGTHENING SPACE TABLE
Dripper spaces ( cm )
Lateral lenght
Flow Rate Change
( % )
Withoutslope Down Slope Above Slope
0% 1% 2% 1% 2%
20
7,5 64 71 78 55 47
10 72 79 85 64 57
15 86 92 97 79 72
25
7,5 75 85 94 64 53
10 85 94 102 74 64
15 101 110 117 91 82
30
7,5 86 99 110 71 57
10 97 109 119 83 70
15 115 126 136 103 91
40
7,5 106 125 141 83 64
10 119 137 152 98 80
15 142 158 173 123 106
50
7,5 125 151 173 94 69
10 141 165 186 111 87
15 167 190 209 141 118
60
7,5 142 176 204 102 73
10 160 191 218 122 93
15 191 220 245 157 128
Ø 16 FLAT DRIP IRRIGATION PIPE 2,5 lt/h LENGTHENING SPACE TABLE
Dripper spaces ( cm )
Lateral lenght
Flow Rate Change
( % )
Withoutslope Down Slope Above Slope
0% 1% 2% 1% 2%
20
7,5 50 55 59 44 39
10 56 61 65 51 46
15 67 71 74 62 57
25
7,5 59 65 71 51 44
10 66 72 78 59 52
15 78 84 89 72 66
30
7,5 67 76 83 57 48
10 75 83 90 66 57
15 89 97 103 81 73
40
7,5 82 95 106 67 54
10 93 105 115 78 66
15 110 121 131 98 86
50
7,5 97 115 129 76 59
10 109 126 140 90 73
15 130 145 158 113 97
60
7,5 111 133 152 84 63
10 125 146 164 100 79
15 148 167 184 125 106
Flat Drip Irrigation Pipes
Factory : Panplast Irrigation Systems Konya-Ankara Yolu Üzeri, Yeşilöz Mah. Acıkuyu Mevkii Cihanbeyli / KONYA /TURKEYTel : +90 (332) 673 21 47 • 673 30 03 • 673 30 05 • 673 30 09 • 673 19 68Fax : +90 (332) 673 19 67 web: www.panplast.com.tr e-mail : [email protected]
FEATURES
• 3/4 male connected.
• For easy to know colourly nozzle.
• Body, arm and nozzles have been made by durable original plastic raw material.
• Bow and pin are crom nickel stainless
• The angle of irrigation orbit 32-34°.
• Homogeneous water throwing provides optimal humidity in soil.
• Appropriate for open farm agriculture like sugar beet, potato, carrot.
3/4’’ PLASTIC SPRINKLER HEAD
Nozzle Diametermm
Pressurebar
Flower Ratem³/saat
Wetting Diameterm
Sprinkler Ratemm/saat
4.0x3.5
1.5 0.69 17 3.05
2.5 1.10 21 3.18
3.5 1.32 22 3.47
5.0x4.0
1.5 1.00 20 3.19
2.5 1.50 21 4.33
3.5 1.75 22 4.61
5.0x4.2
1.5 1.30 18 5.11
2.5 1.70 20 5.41
3.5 1.93 21 5.58
PAN-3S P R I N K
Factory : Panplast Irrigation Systems Konya-Ankara Yolu Üzeri, Yeşilöz Mah. Acıkuyu Mevkii Cihanbeyli KONYA /TURKEY
Tel : +90 (332) 673 21 47 • 673 30 03 • 673 30 05 • 673 30 09 • 673 19 68Fax : +90 (332) 673 19 67
web: www.panplast.com.tr e-mail : [email protected]
PAN-2S P R I N K
* Standard Nozzle (Green)• For equal distribution of water (Cu>%80) arrange gap 10x10 m.
1/2’’ PLASTIC SPRINKLER HEAD
Nozzle Diametermm
Pressurebar
Flower Ratem³/saat
Diameterm
1.5 0.380 20
2.8x1.8* 2.0 0.500 20
Orange 2.5 0.680 21
3.0 0.750 22
FEATURES
• 3/4 male connected.
• For easy to know colourly nozzle.
• Body, arm and nozzles have been made by durable original plastic raw material.
• Bow and pin are crom nickel stainless
• The angle of irrigation orbit 32-34°.
• Homogeneous water throwing provides optimal humidity in soil.
• Appropriate for open farm agriculture like sugar beet, potato, carrot.
Factory : Panplast Irrigation Systems Konya-Ankara Yolu Üzeri, Yeşilöz Mah. Acıkuyu Mevkii Cihanbeyli KONYA /TURKEY
Tel : +90 (332) 673 21 47 • 673 30 03 • 673 30 05 • 673 30 09 • 673 19 68Fax : +90 (332) 673 19 67
web: www.panplast.com.tr e-mail : [email protected]
SPRINKLERPIPES
Ürün Cinsi
Ø 50 PE Latch Sprinkler Pipe 5 mt
Ø 50 PE Latch Sprinkler Pipe 6 mt
Ø 63 PE Latch Sprinkler Pipe 5 mt
Ø 63 PE Latch Sprinkler Pipe 6 mt
Ø 75 PE Latch Sprinkler Pipe 5 mt
Ø 75 PE Latch Sprinkler Pipe 6 mt
Ø 90 PE Latch Sprinkler Pipe 5 mt
Ø 90 PE Latch Sprinkler Pipe 6 mt
Ø 110 PE Latch Sprinkler Pipe 5 mt
Ø 110 PE Latch Sprinkler Pipe 6 mt
Ø 110 PE Latch Sprinkler Pipe 5 mt (3 Latch )
Ø 110 PE Latch Sprinkler Pipe 6 mt (3 Latch )
Ø 125 PE Latch Sprinkler Pipe 5 mt
Ø 125 PE Latch Sprinkler Pipe 6 mt
Ø 140 PE Latch Sprinkler Pipe 5 mt
Ø 140 PE Latch Sprinkler Pipe 6 mt
Ø 160 PE Latch Sprinkler Pipe 5 mt
Ø 160 PE Latch Sprinkler Pipe 6 mt
Ürün Cinsi
Ø 75 PE Clamp Sprinkler Pipe 5 mt
Ø 75 PE Clamp Sprinkler Pipe 6 mt
Ø 90 PE Clamp Sprinkler Pipe 5 mt
Ø 90 PE Clamp Sprinkler Pipe 6 mt
Ø 110 PE Clamp Sprinkler Pipe 5 mt
Ø 110 PE Clamp Sprinkler Pipe 6 mt
Ürün Cinsi
Ø 125 PE Clamp Sprinkler Pipe 5 mt
Ø 125 PE Clamp Sprinkler Pipe 6 mt
Ø 140 PE Clamp Sprinkler Pipe 5 mt
Ø 140 PE Clamp Sprinkler Pipe 6 mt
Ø 160 PE Clamp Sprinkler Pipe 5 mt
Ø 160 PE Clamp Sprinkler Pipe 6 mt
WHAT IS IRRIGATION?
The irrigation is defined as providing water which the plants need and cannot be supplied by natural raining to the plants in suitable time and by suitable method.
Sprinkler Irrigation
In Sprinkling Irrigation method, the irrigation water is carried to sprinkling heads in the pressured and covered pipes and then it is applied to the ground like natural raining. It can be applied at the over inclined, not flat areas and not deep ground through not causing erosion and can be applied as productively at the soil with high permeability or low holding water capacity.
Panplast Sprinkling Pipes are manufactured in accordance with TS 418-2 PrEN 12201-2 and TS 418-2 EN 12201-2 standards and ISO EN 9001:2000 Quality Management System; high density Polyethylene (HDPE) is used and it can be manufactured in 50-63-75-90-110-125-140 and 160 mm diameters and upon request in 5 or 6 meters length. Panplast Sprinkling Pipes and additional parts are two kinds as clamp and retched; it is durable against to sun shine, fracture and breaking.
Factory : Panplast Irrigation Systems Konya-Ankara Yolu Üzeri, Yeşilöz Mah. Acıkuyu Mevkii Cihanbeyli KONYA /TURKEY
Tel : +90 (332) 673 21 47 • 673 30 03 • 673 30 05 • 673 30 09 • 673 19 68Fax : +90 (332) 673 19 67
web: www.panplast.com.tr e-mail : [email protected]
SPRINKLERPIPES
FEATURES
• Easy and safe usage, appropriate for culturing seasonal and lasting.
• Produced from high-quality original raw material.
• In it added material providing resistency to Uv rays.
• It is of the most minimal level of loss of pressure because of its smooth and its inner surface with long distances and in large area implementation.
• It is resistant to on going usual regathering and montage.
• Latch and Clamp PE Sprinkler Pipes; Ø50 - Ø63 - Ø75 - Ø90 -Ø110 - Ø125 - Ø140 - Ø160 in diameters are produced.
• It is highly resistent to chemicals and fertilizers used in agriculture.
• Panplast Latch and Clamp PE Sprinkler Pipes have large production gap which supply all agriculturel requirement in level.
• Due to the fact that Panplast Latch and Clamp PE Sprinkler Pipes’ Caps are produced in the same mold, they do not have any dishamony with their additional parts.
Factory : Panplast Irrigation Systems Konya-Ankara Yolu Üzeri, Yeşilöz Mah. Acıkuyu Mevkii Cihanbeyli KONYA /TURKEY
Tel : +90 (332) 673 21 47 • 673 30 03 • 673 30 05 • 673 30 09 • 673 19 68Fax : +90 (332) 673 19 67
web: www.panplast.com.tr e-mail : [email protected]
SPRINKLERFITTINGS
Latch Male Cap
Latch Line Valve
Latch Cross
Latch Female Motopomp
Latch Female Cap
Latch Elbow
Latch Gasket
Latch Bung (Male)
Latch T
Latch Male Motopomp
Latch Abot
Latch Reduction
Latc
h Fi
ttin
gs
Factory : Panplast Irrigation Systems Konya-Ankara Yolu Üzeri, Yeşilöz Mah. Acıkuyu Mevkii Cihanbeyli KONYA /TURKEY
Tel : +90 (332) 673 21 47 • 673 30 03 • 673 30 05 • 673 30 09 • 673 19 68Fax : +90 (332) 673 19 67
web: www.panplast.com.tr e-mail : [email protected]
SPRINKLERFITTINGS
Clamp Male Motopomp
Clamp Male Cap
Clamp Line Valve
Clamp Cross
Extension Pipe
Clamp Female Cap
Clamp Elbow
Clamp-Latch T
Spherical Valve
Clamp Bung (Female)
Clamp T
Clamp-Latch Reduction
Clamp Gasket
Clamp Abot
Clamp Reduction
Clamp Female Motopomp
Clam
p Fi
ttin
gs
DRIPFITTINGS
16x Out Nipple 16 Adding Nipple16x16 Mini Valve 16x Out Mini Valve
16 T 16 Elbow16 Fuse 16 Naturel Gasket
20 Elbow
Adjusttable Nozzle Emitter 3 mm Drilling Apparatus 16 Drill Bits Sleeved Drilling Apparatus
20x20 Mini Valve 20x Out Mini Valve
Factory : Panplast Irrigation Systems Konya-Ankara Yolu Üzeri, Yeşilöz Mah. Acıkuyu Mevkii Cihanbeyli KONYA /TURKEY
Tel : +90 (332) 673 21 47 • 673 30 03 • 673 30 05 • 673 30 09 • 673 19 68Fax : +90 (332) 673 19 67
web: www.panplast.com.tr e-mail : [email protected]
DRIPFITTINGS
20 Adding Nipple
20x20x20 T
17 Out Nipple With Ring
17 Multiple Sprader Nipple (with 6)
20x16 Reduction
20x Out Nipple
17x17 Adding Nipple With Ring
Pipe Collection Reel
20 Fuse
17x17 Screw Mini Valve
17x16 Adding Nipple With Ring
Pressure Adjustment Emitter
20x16x20 T
17x16 Screw Out Mini Valve
Factory : Panplast Irrigation Systems Konya-Ankara Yolu Üzeri, Yeşilöz Mah. Acıkuyu Mevkii Cihanbeyli KONYA /TURKEY
Tel : +90 (332) 673 21 47 • 673 30 03 • 673 30 05 • 673 30 09 • 673 19 68Fax : +90 (332) 673 19 67
web: www.panplast.com.tr e-mail : [email protected]
Abot Headed Latch Sprinkler PipeØ 63 Abot Headed Latch Sprinkler Pipe 5 mt
Ø 63 Abot Headed Latch Sprinkler Pipe 6 mt
Ø 63 Abot Headed Latch Sprinkler Pipe 10 mt
ABOT HEADED LATCH SPRINKLER PIPE
Factory : Panplast Irrigation Systems Konya-Ankara Yolu Üzeri, Yeşilöz Mah. Acıkuyu Mevkii Cihanbeyli KONYA /TURKEY
Tel : +90 (332) 673 21 47 • 673 30 03 • 673 30 05 • 673 30 09 • 673 19 68Fax : +90 (332) 673 19 67
web: www.panplast.com.tr e-mail : [email protected]
NEWPRODUCT
Cross Headed Latch Sprinkler PipeØ110/63 Cross Headed Ø110 Latch Sprinkler Pipe (5 mt)
Ø110/63 Cross Headed Ø110 Latch Sprinkler Pipe (6 mt)
CROSS HEADED LATCH SPRINKLER PIPE
Factory : Panplast Irrigation Systems Konya-Ankara Yolu Üzeri, Yeşilöz Mah. Acıkuyu Mevkii Cihanbeyli KONYA /TURKEY
Tel : +90 (332) 673 21 47 • 673 30 03 • 673 30 05 • 673 30 09 • 673 19 68Fax : +90 (332) 673 19 67
web: www.panplast.com.tr e-mail : [email protected]
NEWPRODUCT
PANMETERTENSIOMETER
It gives you information whether irrigation time comes or not and how much water you should give. It is suit-able to place one tensiometer for the plant whose root reaches 40 cm depth, to place two tensiometers for the plant whose root reaches 40-120 cm depth, three tensiometers whose root reaches over 120 cm depth.
Tensiometer is placed to an area in where plant roots are intensive. After determining the area where the ten-siometer will be placed in the field, the hole is drilled in desired depth through special hole digger. The stones which are bigger than bean are selected from extracted soil and taken into a plastic bag. Some water is added over them and it becomes intense soup. Then the soil – water mixture is flowed in the hole. The ceramic end of tensiometer is put into soil, sinked into mud, it is dip a few times so that the ceramic end contacts with soil well.
Then it is filled with extracted soil. The place of tensiometer is marked by a sign bar. It is suitable to place two tensiometer one in 30 cm depth other in 60 cm depth for the plant as sugar beet whose root reaches depth. At the commencing and stopping the irrigation the values that are read at shallow tensiometer are used. When the read value reaches to required value for commencing irrigation, then the irrigation is commenced. When the indicator of tensiometer begins to decrease, the irrigation is stopped. The read values for commencing ir-rigation are seen at the chart. If it is possible every morning, if it is not possible, the tensiometer values must be read and recorded once in a day. As much as drying the soil the read values are increased, as much as the soil is wet the read values are decreased. In time, there may be decrease at the water inside of tensiometer. The cover is loosening through holding pipe of tensiometer and to be filled the water from the tank into the pipe and then the cover is sealed again.
It is not the best way for the
highest production to make
applications based on guesses.
USING TENSIOMETER AT THE IRRIGATION
NEWPRODUCT
Factory : Panplast Irrigation Systems Konya-Ankara Yolu Üzeri, Yeşilöz Mah. Acıkuyu Mevkii Cihanbeyli KONYA /TURKEY
Tel : +90 (332) 673 21 47 • 673 30 03 • 673 30 05 • 673 30 09 • 673 19 68Fax : +90 (332) 673 19 67
web: www.panplast.com.tr e-mail : [email protected]
PANMETERTENSİYOMETRE
PLANT READING CBARGrapvine 40-60Gombo 60-70Pea 60-70Pepper 40-50Broccoli 25-35Strawberry 20-30Tomato 35-45Bean 40-50Carrot 45Cucumber 45Zucchini 25Black Cabbage 45Cauliflower 34Melon-Watermelon 30-40Cherry-Sour Cherry 30-40Cabbage 34Lettuce 40-50Fruit Trees 40-50Corn 40-60Citrus 50-70Cotton 70-80Potato 30-50Eggplant 45Leek 25Onion 25Turnip 25Sugar Beet 40-60Cereals 50-70Radish 25Clover 60-70
The points that to be consideredThere are many points that must be considered while using tensiome-ter. One of them, not to displace the tensi-ometer while adding missing water. If the contact of ceramic end is spoiled with the water, there may be fault at the reading values. Another point the po-res of ceramic end is closed in time or due to faulty use. The primarily reasons of stopping are the lime that is put into tensiometer and microorganisms that are develo-ping in the water. Adding a few drops eyestone solution into water prevents growing microorganisms in the wa-ter. But it is more difficult to prevent stopping due to lime in the water. Decreasing permeability of ceramic end ma-kes slow the reaction of tensiometer to humidity change.
At the case of leaving tensiometer with full of water in the open area, the vapor water from the ceramic cup le-aves residues. Those residues cause to stop pores. Not to cause such case, the tensiometer of which water is filled as to be placed in to the soil cannot be left in open area; if it will be left in open area it must be put into another cup full of water or the ceramic end must be covered with wet cloth. At the end of growing season, the tensiome-ters should be turned a bit right and a bit left then should be extracted from the wet soil vertically. The ceramic end of tensiometer that was extracted from the soil must be put into a cup full of water; when it is brought to home, it must be left in vinegar for one night and then it must be cleaned with boiled and cooled water and must be kept until the next season.
Factory : Panplast Irrigation Systems Konya-Ankara Yolu Üzeri, Yeşilöz Mah. Acıkuyu Mevkii Cihanbeyli KONYA /TURKEY
Tel : +90 (332) 673 21 47 • 673 30 03 • 673 30 05 • 673 30 09 • 673 19 68Fax : +90 (332) 673 19 67
web: www.panplast.com.tr e-mail : [email protected]