packet tracer tutorial # 2

Packet Tracer Tutorial # 2Dr Ay_Bee

Federal Urdu University of Arts Science and Technology, Karachi

Take 3 router and 3 switches

Connect switch to router with copper straight through cable

Double click on router 0

Click on config tab

Then click to the interface through which the router is connected with the switch.enter IP Address, check port status on

Click on config tab

Connect 2 PCs with each router through copper straight through cable

Rename the PCs so that they are easy to identify

Double Click First PC

Click On the Desktop Tab And Click IP Configuration

Insert IP of PC but make sure it is of the same class as

its router have , Insert Default Gate Way (IP of Router)

Insert IP and Gateway of 2nd PC

Insert IP and Gateway of 3rd PC

Insert IP and Gateway of 4th PC

PC are configured with Router and now we have have 3 networks

Connect Router 0 with Router 1 using Fiber Cablefast ethernet 4/0 - fast ethernet 4/0

Connect Router 1 with Router 2 using Fiber Cablefast ethernet 5/0 - fast ethernet 5/0

Router Configuration

Router 0 and Router 1

Click on the the interface through which the router 0 is connected with router 1

Insert the IP and check Port status

Click on the RIP and Enter RIP addresses of networks connected with this router

Insert the IP and check Port statusIP must be same as the router 0 has in fast ethernet 4/0

Router 1 and Router 2

Insert the IP and check Port status

Click on the RIP and Enter RIP address of this new network

Insert the IP and check Port statusIP must be same as the router0 has in fast ethernet 5/0

Open command prompt of any PC and ping other PC

Another Pinging

Thank You .......

Education