operatieassistent m/v - eures · web vieweurohealthcare will pay all cost. after a few months (time...

VACANCIESWHAT ARE WE LOOKING FOR IN THE NETHERLANDS?Here is a selection of the vacancies in the Netherlands. You can find more vacancies on the EURES website: www.eures.europa.eu, and information on https://sites.google.com/site/euresnl/ , www.werk.nl

LanguageFor all vacancies knowledge of English or German is required.If you don’t speak English or German: Don’t write.How to react.Send an email to the contact. Write in English or German. Your CV should be in English or German.

This list was compiled the 21th of September.

Design Engineer.........................................................................................................................2Inst. Engineer Offshore Projects.................................................................................................2Document Quality Associate.......................................................................................................3Quality Manager..........................................................................................................................4Quality Manager Medical Writing................................................................................................5Software designer facilities.........................................................................................................5Embedded software designer.....................................................................................................7Precision Engineer......................................................................................................................7Scrub Nurses..............................................................................................................................8Medical Doctor............................................................................................................................9Engineers WTB/ Mechatronica/ Electro......................................................................................9Architects (All Levels)...............................................................................................................10Senior Designer Mechanics......................................................................................................11Senior System Designer Mechatronics.....................................................................................11SENIOR PRODUCT ENGINEER.............................................................................................12Schweisser Mig/Mag.................................................................................................................13PLC SOFTWARE ENGINEER..................................................................................................13HMI SOFTWARE ENGINEER..................................................................................................14Field Service Engineer..............................................................................................................14Experienced Electrical Engineer...............................................................................................15Engineer/Designer....................................................................................................................16CAD draftsman.........................................................................................................................16Employee Tree Nursery............................................................................................................17Engineer Plastics Technical Service.........................................................................................17Industrial electrician..................................................................................................................18Senior Chemist – Grease Lubricants........................................................................................19NDO inspecteurs.......................................................................................................................19Lab Technician Trainees in Chemistry.....................................................................................20(Prefab) Steel Fixer...................................................................................................................21(Prefab) Steel Fixer Starting.....................................................................................................21(Prefab-)Eisenflechter...............................................................................................................22Eisenflechter (Anfänger)...........................................................................................................22Welder( all certificates).............................................................................................................23Assembly worker/ Flange fitter.................................................................................................23Pipe engineer (construction).....................................................................................................24Machinefitter.............................................................................................................................24MARINE SURVEYORS............................................................................................................24ML NXE - SQ Test Technician..................................................................................................25Mechanical Install Engineer......................................................................................................25Production Engineer.................................................................................................................261

http://www.werk.nl/

https://sites.google.com/site/euresnl/

http://www.eures.europa.eu/

Project Leader/Planner.............................................................................................................26Senior Engineer Electronics.....................................................................................................27Researcher Ink and Printhead..................................................................................................28Process Engineer......................................................................................................................29Software Developer..................................................................................................................30Thermodynamic Designer.........................................................................................................30Technical Lead Software Venture.............................................................................................31Software Tester, BSc or MSc degree.......................................................................................32General C Nurse.......................................................................................................................33Operating Theatre Assistant.....................................................................................................34

Design Engineer Responsible for design and development of high temperature sensors components (ceramics, screen-printing inks and sintered structures) for the automotive industry. A Design Engineer at Sensata finds solutions for customer needs. Fits specifications and translates this to components and assembly. Tests and proves agreed on specifications. Is responsible for the product, from first customer contact until mass assembly. Works in international teams and with international customers.Most important tasks and responsibilities:• Works in project teams on design of sensors• Is co-responsible for progress of the project• Stays in contact with customers and suppliers on a regular basis.Educational requirements:Responsible for design and development of high temperature sensors components (ceramics, screen-printing inks and sintered structures) for the automotive industry. A Design Engineer at Sensata finds solutions for customer needs. Fits specifications and translates this to components and assembly. Tests and proves agreed on specifications. Is responsible for the product, from first customer contact until mass assembly. Works in international teams and with international customers.Most important tasks and responsibilities:• Works in project teams on design of sensors• Is co-responsible for progress of the project• Stays in contact with customers and suppliers on a regular basis.Educational requirements:• MA technical education level • BA technical education levelAdditional requirements:

• Experience in the area of product design or R&D.• Good communication skills, written and verbally, in English.• Teamplayer, able to work in multidisciplinary project teams .• Knowlegde of MS-Office software (Word, Windows, Excel and Outlook).• Pro-active attitude.• Prepares to travel abroad.• Capable of setting priorities.• Enjoys facing challenges.• Result oriented.• Teamplayer, able to work in multidisciplinary project teams .• Knowlegde of MS-Office software (Word, Windows, Excel and Outlook).• Pro-active attitude.• Prepares to travel abroad.• Capable of setting priorities.• Enjoys facing challenges.• Result oriented.

Interested?Send an email with CV and motivation to [email protected] VenloVacancy number: 4061312/20-09-2012Publish until: 13-12-2012React before: 13-12-2012

Inst. Engineer Offshore ProjectsAs Installation Engineer you will support the technical preparations needed for the installation project of either subsea infrastructures and pipelines, structures such as jackets and topsides or floating structures such as spars or TLP’s.

As Installation Engineer you will support the technical preparations needed for the installation project of either subsea

2

mailto:[email protected]

infrastructures and pipelines, structures such as jackets and topsides or floating structures such as spars or TLP’s. Next to that, you could also be involved in technical project preparation of removal of offshore structures. Your work will focus on deep and ultra-deep waters and on the biggest projects in the business. It is your responsibility to develop procedures, create manuals and write reports on the various pipe lay projects. You are part of a multidisciplinary project team within our Technology department.It is one of your tasks as an installation engineer to advise and support the project team in the optimization of the design and the procedures. During the execution of the project offshore you will explain, recalculate and adjust calculations when needed. Next to the offshore trips, it could be part of you job to visit yards or construction side to provide technical support for a project.The department:The Technology department of the company is responsible for the technical preparation necessary for fixed/floating platform installation and removal, pipeline and subsea installation projects. Together with colleagues and clients, our engineers work in dedicated multi-discipline project teams in order to provide constructive and workable solutions for these technically challenging projects.The job requirements the company is looking for: •You have a Bachelor or Master degree in Civil, Mechanical, Maritime or Aeronautical Engineering or equivalent. •You have at least 3 years’experience with construction projects.•You have understanding of offshore projects. •You have excellent analytical and pragmatic skills. •You have good communication skills in English, both spoken and written. •You have the ambition to work (temporarily) offshore on our vessels, overseas or in our other offices. What the company offers you:•An informal work atmosphere in a challenging and international environment. •a good salary and excellent secondary benefits, such as a bonus scheme, a pension scheme, 35 days annual leave and various insurances. •Various opportunities for personal development, supported by our training & development department.

•We give you the opportunity to develop yourself and your own initiatives and to work independently within a team of committed colleagues.

An assessment could be part of the application procedureThe company excels at transporting, installing and removing offshore facilities. These include fixed and floating structures, subsea pipelines and infrastructures in shallow, deep and ultra-deep water.the company owns three of the world's largest semi-submersible crane vessels, the Thialf, Hermod and Balder. At this moment a new monohull vessel, Aegir, is built with the capability to execute complex deep water infrastructure and pipeline projects.


Document Quality Associate Performs the QC/quality process associated with portions of a document or submission ensuring accuracy based on informational source documentation. Communicates findings and interacts with members of a document working group/author team to complete assigned task. Activities include quality control review of complex tables or figures, text, reference citation lists, appendix material, converted content, re-formatted and re-granulated documents, etc.

Essential Job Responsibilities: Generally, Level II performs the responsibilities/duties in a self-directed manner; activities and progress are reviewed by the Associate Document Quality Manager and/or Line Management. Generally, Level I performs the responsibilities/duties with general supervision.

• Performs the QC/quality process associated with a portion of a document or submission such as a major document component (Level II) or document subcomponent (Level I). Examples of a major document component are all End-of-Text Tabulations (pharmacology,

3


pharmacokinetics, toxicology, clinical) or all text for an Investigator’s Brochure; and the clinical or nonclinical section of an IND). Examples of a document subcomponent are an appendix, the pivotal repeated dose toxicology tabulations, or in-text tables contained in only the clinical section of an IND. Generally, the review is performed and documented using complex procedures associated with an electronic document management system (Level II) or via hard copy for a subcomponent (Level I).• Ensures that the content of the document component/subcomponent is supported by informational source documentation. • Interacts with members of a document working group/author team (generally writer) in order to complete assigned responsibility (Level II). Level I will generally interact with lead or co-lead of the QC review team or writer.• Performs quality review of complex tables or figures created from provided data, reference citation lists, converted content (from .pdf format in to MS Word format), and re-formatted and granulated/re-granulated documents.• In addition, a Sr. Document Quality Associate (Level II) may assist in scheduling or co-ordination of QC activities and may act as co-lead of a quality review effort.• In addition, a Sr. Document Quality Associate (Level II) may provide quality metric data to more senior staff.

Quantitative Dimensions: • Successful and timely completion of assigned task(s) affects complex documents that can be key to maintaining timelines for a drug development program.

Organizational context: • Project track, document QC responsibilities.

Required Qualifications: • BA/BS degree or equivalent; 5 years (Level II) / 2-4 years (Level I) relevant experience. • Preferred: At least 3 years experience in regulated document QC.o Familiarity with at least 3 types of regulated document created by Medical Writing (Level II).

o Familiarity with at least 1 type of regulated document created by Medical Writing (Level I).• Able to self-direct completion of assigned responsibilities.• Able to perform tasks that require technical skill and solve problems of moderate scope and complexity.• Effective oral and written communication skills. • Effective interpersonal skills.


Quality Manager Purpose & Scope of Position: Organizes, schedules and coordinates the tasks of staff or Contract Research Organization (CRO) document QCers. Reviews document QC work to maintain quality standards. Resolves QC-related issues. Ensures CRO and/or staff QCers are trained on Astellas document quality standards. May perform the QC/quality process associated with major documents/submissions.

Essential Job Responsibilities: • Organizes, schedules and coordinates tasks of staff and CRO QCers.• Reviews QC work to maintain quality standards.• Resolves QC related issues.• May perform the QC/quality process associated with major documents/submissions. • May actively lead quality review activities.• Ensures CRO and/or staff QCers are trained on Astellas document quality standards.• Assists more senior staff by providing requested input regarding CRO assignment and performance.• May be requested to recommend improvements in QC processes or procedures.

Quantitative Dimensions:

4


Maintains quality standards.• Successful and timely completion of assigned task(s) affects complex documents that may be key to maintaining timelines for a drug development program.

Organizational context: • Project track, document QC.• Quality standards responsibilities.

Required Qualifications: • BA/BS degree or equivalent; 7+ years relevant experience, 5 years with MS/MA. • Preferred: Technical QC expert for at least one of the major types (IND/IMPD and NDA/MAA components, Investigator’s Brochure, briefing document, etc.) of regulated documents with at least 5 years experience in regulated document QC. • Performs independently without appreciable direction regarding technical aspects.• Able to successfully partner with CRO and Astellas staff.• Effective oral and communication skills.• Effective interpersonal skills.


Quality Manager Medical WritingAs Quality Manager you have a key role within the Medical Writing department in the Netherlands, and you will be the bridge to the international organization. You are responsible to review document QC work to maintain quality standards and to resolve QC related issues. You will organize, schedule and coordinate the tasks of staff and QC-ers (within the Contract Research and Writing Organisation), and that they are trained according to the document quality standards of the company. You may perform the QC/ Quality process associated with major documents/submissions. You lead quality review activities. In this role you also assist senior staff by providing requested input

regarding CRO assignment and performance and you will look for, recommend and implement QC process or procedure improvements. The candidate has more than 5 years relevant experience and at least a BA/BS degree or equivalent or higher (MS/MA). You are a technical QC expert on at least one of the major types of regulated documents like IND/IMPD and NDA/MAA components, investigators brochure, briefing document etc. You perform independently regarding technical aspects and have effective interpersonal and communications skills. This will be a long term assignment of at least one and probably more years.

The Investigational Medicinal Product Dossier = IMPDNDA/MAA: The application for marketing authorization is called New Drug Application (NDA) in the USA or Marketing Authorization Application (MAA) in the European Union and other countries, or simply registration dossier


Software designer facilitiesThe software designer reports to the software group leader and interacts with the software project lead, software architect and the application development team. You are able to gather all the requirements at the client, specify the system and translate it into a software design. You will develop, realize and test the subsystem design within the limits of the system architecture, coding standards and project planning. You will be working in a multidisciplinary environment and will participate in the definition of system specifications.

EducationBachelor or Master degree in Electronics, Embedded Systems (technical software), Computer Science or comparable. You have at least 3 years experience in developing software in a technical environment which means product- or machine development. You have gained experiences with the software

5



development process: design, develop, realize, implement, test and integrate.

Technical skillsYou must have experience with:• Software programming in C and C++• Solaris (Operating System by SUN)• Minimum of 3 years working experience in software development

For 1 vacancy we are specifically looking for must have experience in multithreading / thread safe software applications

Nice to have:• Scripting language Python• Operating Systems like WindRiver Linux, PowerPC, VxWorks• Experienced in software development in a real-time environment• SCRUM• SCM (Software Configuration Management) tool like ClearCase, ClearQuest or CMSynergy• Experienced in using design patterns• Experience in a machine development environment• Experience in delivering support towards other developers or clients

Personal skillsYou are a strong communicator, pro-active, decisive and having a pragmatic attitude. Being a team player is very important and you are able to take ownership. You are able to find your way in a large, complex organization to gather all the information needed to specify your software.As a software developer you are quality orientated and aware of testability, maintainability and serviceable products. You are able to analyze software issues, fixing bugs and develop code in a structured way. Your English language is on a good level (verbal and written). On a long term, you are willing to invest in learning the Dutch Language. Our offer:We will challenge you to grow on both personal and technical level. We support you in this by offering you a personal coach and the possibility to follow training at our Yacht Academy. We are offering candidates a highly technical environment to work in, oriented towards machine development and control

systems. Also a living environment in the region of Eindhoven is offered.

Company profile:the company is market leader in providing solutions concerning flexible work also known as secondment. Because the southern region of The Netherlands has a strong industry, YACHT Technology is located at the High Tech Campus in Eindhoven. In this region, Brainport is the technical centre of Research & Development. This region is internationally oriented with well known companies like Philips, ASML, FEI, Océ and NXP.

the company focusses on 7 technical competences: Mechanics, Mechatronics, Electronics, Embedded Systems, Physics, System testing and Manufacturing.

The Embedded Systems unit has a focus on the development of digital electronics (making use of digital programmable hardware) and embedded software (from embedded towards application level).

You:• Are able to commit yourself in living and working within The Netherlands for at least 3 years. Our customers are developing products and machines on world’s highest level and are also investing in all their employees, so commitment is very important. • Are interested in working in an international oriented company, where you will work together with people from different cultural backgrounds

Contact:[email protected] VenloVacancy number: 4054512/20-09-2012Publish until: 13-12-2012React before: 13-12-2012

Embedded software designerThe software designer reports to the software group leader and interacts with the software project lead, software architect and the application development team. You are able to gather all the requirements at the client, specify the system and translate it into a software design. You will develop, realize and test the subsystem design within the limits of the system architecture, coding standards and

6


project planning. You will be working in a multidisciplinary environment and will participate in the definition of system specifications.

EducationBachelor or Master degree in Electronics, Embedded Systems (technical software), Computer Science or comparable. You have at least 3 years experience in developing software in a technical environment which means product- or machine development. You have gained experiences with the software development process: design, develop, realize, implement, test and integrate. Technical skillsYou must have experience with:• Software programming in C • Unix as an Operating system• UML• Minimum of 3 years working experience in software development

Nice to have:• Scripting language Python• XML• SCRUM• SCM (Software Configuration Management) tool like ClearCase, ClearQuest or CMSynergy• Experience in a machine development environment

Personal skillsYou are a strong communicator, pro-active, decisive and having a pragmatic attitude. Being a team player is very important and you are able to take ownership. You are able to find your way in a large, complex organization to gather all the information needed to specify your software.As a software developer you are quality orientated and aware of testability, maintainability and serviceable products. You are able to develop code in a structured way. Your English language is on a good level (verbal and written). On a long term, you are willing to invest in learning the Dutch Language. Our offer:We will challenge you to grow on both personal and technical level. We support you in this by offering you a personal coach and the possibility to follow training at our Academy. We are offering candidates a highly

technical environment to work in, oriented towards machine development and control systems. Also a living environment in the region of Eindhoven is offered.

.The Embedded Systems unit has a focus on the development of digital electronics (making use of digital programmable hardware) and embedded software (from embedded towards application level).

You:• Are able to commit yourself in living and working within The Netherlands for at least 3 years. Our customers are developing products and machines on world’s highest level and are also investing in all their employees, so commitment is very important. • Are interested in working in an international oriented company, where you will work together with people from different cultural backgrounds• Are motivated to work in a top-class technical environment, leading the world of technology


Precision Engineerthe sector Development & Engineering (D&E) is responsible for the specification and the design products. The department Mechanical Development (MDEV) is designing, building and testing mechanical systems and sub-systems which are fitted into the end products. The group Opto-Mechanical Sources is responsible for the engineering of mechanical modules for the EUV light sources. Precision Mechanics consists of experts who have a large knowledge of modern construction principles to achieve high accuracy in high tech machine design.Job MissionAs an Expert in Precision Engineering you are responsible for the development and application of mechanical designs to meet system specifications and operational requirements.Job Description

7


• Specifies and designs the modules and/or functionality to realize the required performance.• Uses state of the art design methods and construction principles to ensure adequate designs that can be realized from a technical and supply chain perspective.• Drives the qualification of the design by contributing to the specification of tests and the design and realization of test equipment.• Ensures that prototypes are built and tests are carried out.• Delivers the technical product documentation that is needed to release the design for volume production.Required educationBachelor, Master or PhD in Mechanical Engineering, preferable with specialization in Precision engineering, Opto-mechanics or Mechatronics.Your experience• Well educated and experienced in the application of construction principles.• High-class abilities to make stiffness and strength calculations.• Well-developed analytical ability, ability to design concepts and a pragmatic attitude and capability to translate concepts into practical designs that meet the specified requirements.• Experience with 3D CAD modeling tools is required, preferably Unigraphics NX.• At least 3 years of experience in creating new machine concepts (or large complex modules). Covering all aspects like layout, serviceability, transportability, install, performance, etc...• Preferably you also have knowledge of one or more of the following aspects:o Light weight and high stiffness designs.o Temperature, dimension and position stability.o Design of joints (Bolted, flexible, adhesives).o Air bearings, leaf springs, dampers, etc.o Manufacturability.o Design rules for high vacuum.o Material application: especially ceramics, energy absorbing materials, fibre reinforced plastics, Steel/aluminum/titanium/invar/inconel.Your personality• Strong analytical ability with a pragmatic attitude.• Creative thinking capability.• Abstract thinking, out-of-the box thinking.• Communication. Effective communication with all levels and disciplines. Clear and structured way of reporting.

• Team player.• Good knowledge of English.Our offer: Continuance, a strong professional network and personal developmentWe will boost your career through personal and technical growth. We’ll support you by offering a personal coach and the possibility to follow courses and trainings via our highly recommended Yacht Academy. We’ll offer interesting benefits and a market conform salary. You’ll become member of the team of professionals who share your education, ambitions and your competencies. This will enable you to interact with your colleagues from Yacht in your own technology language! You’ll become a member of the yacht network, which stretches the high tech industry. You will be challenged by your peers. As a result you’ll be able to keep your knowledge and skills up-to-date!


Scrub Nurses Description of the job- You are part of a theatre team. - You make the necessary arrangements for the operations.- You assist the surgeon during the procedure (scrub nurse). - You take care of administrative procedures (time-report on procedure and used material). - You supervise students and keep protocols and procedures up to date. - You work according to a shift system (day/evening/night) and on call shiftsJob demands- Certified scrub nurse with experience.- Teaching skills.- Enthusiastic and committed.- Team player and good listener.- Flexible and easy to adjust in various circumstances.- Assertive and independent.- Proactive and forward thinker.- Tactful.

Location: GroningenContact Arend Mud: [email protected]

8



WERKbedrijf Groningen CentrumVacancy: 7987011/11-11-2011Publish until vacancy: 25-10-2012React before: 25-10-2012

Medical Doctor Medical Doctor who will be educated as Company Doctor (Médico de Emprésa). He/she will start to work immediately and will start the education at the same time. The employer will pay for the educationKey duties:•Advice company management on absenteeism and improvement of labour conditions•Check up on sick personnel•Accompany and advice personnel in case of serious illness and chronic diseases•Regular medical check ups of personnel•Medical check of newly hired personnel•Medical check of personnel with reference to pension plans

English intermediate level

SalaryWithout experience 2.800-3.200 per monthWith experience 3.200-4.300Certified Company Doctor 4.400 net-9.000 gros per month2.800 gross / 2.100 net3.200 gross / 2.700 net4.300 gross / 3.400 net

The first interviews will be in SpainThe second interview will be in The Netherlands. Tickets and hotel cost will be paid for by Eurohealthcare.When the candidate is approved he/she will get a contract and he/she will return to Spain and follow a Dutch Language Course. Eurohealthcare will pay all cost. After a few months (time is negotiable) the candidate will go to The Netherlands and start working. Eurohealtcare will assist in finding a house and Eurohealthcare will take care of all administration needed for immigration to The Netherlands.Professional qualifications required. Medical University degree.

Contact:dhr. J. Deightonvan Eurohealthcare LimitedE-Mail [email protected]://www.eurohealthcare.eu/vacancies

WERKbedrijf VenloVacancy number: 5827911/25-07-2011Publish until vacancy: 08-12-2012React before: 28-10-2012

Engineers WTB/ Mechatronica/ ElectroWe are looking for Mechatronics and Mechanical Engineers with a feeling for one of the following disciplines: mechanical engineering, machinery construction and/or product development. The engineer is typified as someone who thinks along, can work independently while still remaining an integral part of the company's team spirit. Finally, you have the right ambitions to develop yourself within the discipline and you don’t feel limited in expressing your ideas.Personal characteristics include: • Self-development of knowledge within project teams • Taking initiatives relative to the developments in your field of speciality. • Looking for the best technical solutions for the applications. • You are representative of VIRO engineering. • Master working and thinking level • Experience with / feeling for one or several of the disciplines. • Independence, methodical approach and the ability to work within a team. • Preference for applicants who have experience with 2/3D CAD software, including NX, Pro-E, Catia, Autocad • Fluency in English, both spoken and writtenHigher Vocational Education+/Technological University working and thinking skills.

Contact:mevr. N. Vandewiervan VIRO Echt B.V.E-Mail [email protected] 33, 6100AA ECHT

WERKbedrijf RoermondVacancy: 5791111/21-07-2011Publish until vacancy: 13-11-2012React before: 13-11-2012

Architects (All Levels) 9

http://www.eurohealthcare.eu/vacancies


For a number of projects in early design phases OMA is looking for strong juniors, mediors as well as senior Architects. You will work as a team member, able to create powerful new ideas both in collaboration and independently. All positions are based in our Rotterdam offices and start imminently.OMA in Rotterdam is looking for architects all levels.Only candidates with experience working on complex international projects and whose skills match the essential requirements should apply.Please note that emailed applications will not be reviewed. To apply, visit www.oma.com/jobs and use our online application form to upload your cover letter, resume and portfolio.

Professional degree in Architecture, Masterplanning, Design or in a relevant field Work experience with large scale and complex projects in an international environmentStrong AutoCAD, 3D Max, Rhino, and Adobe Suite skills Strong proven conceptual and design talent • Project leaders – Ability to maintain a general overview of the project and team members• Senior Architects – Ability to coordinate the internal design team and take responsibility for specific areas of the design and project developmentAbility to liaise with consultants and project coordinators to assess design solutions and to guarantee the integrity of the final design • Architects – Ability to understand the design project, prepare and develop drawings, models, images and other documents relating to design• Junior Architects – Ability to perform original design work by utilizing specifications, sketches and ideas on developing designs.Proven experience with Revit Profound knowledge of OMA’s work Cross cultural sensitivity and the ability to work well in a team

OMA’s continued growth offers us an opportunity to look for the most intelligent and creative designers and conceptual thinkers to work on a range of new projects in Europe, Asia, the Middle East, and the Americas. In OMA we have an immediate need for:

Project Leaders

Senior ArchitectsArchitectsJunior Architects

Professional degree (BA/MA) in architecture or urban planning. Experience in internationally renowned offices. Superb conceptual, graphic and design talent. Experience in early design phases such as concept design and schematic design. Experience on large scale projects.

Contact: Via Online sollicitatieformulier op www.oma.com/jobs

WERKbedrijf Rotterdam HerenwaardVacancy: 5689411/18-07-2011Publish until vacancy: 24-10-2012React before: 24-10-2012

Senior Designer Mechanics For an international company with over 7.600 employees we are searching for a senior designer mechanics. The company supports worldwide customers and has 81 subsidiaries spread over 18 countries with production facilities in Eindhoven, Sydney, Singapore and Suzhou, China. Their service offering includes development & engineering, prototyping, custom industrial mechanization and mass production of products that are characterized by high complexity and relatively low production numbers. They have extensive experience in markets equipment for the semiconductor industry, thin film deposition equipment for photovoltaic solar cells, analytical instruments, medical systems, aerospace & defense and mechanization projects.

What characterizes this position?As Senior Designer Mechanics you work in a project-based environment. You're mainly working on the development of mechanical concepts, often in collaboration with fellow systems engineers or customers. Your ultimate responsibility is the mechanical detailed design (incl. package TPD), you make sure that it’s available and meets the requirements according to the agreed time schedule.

Your main activities include:* The specification of mechanical modules and systems, providing support to trade-offs

10

http://www.oma.com/jobs

between the mechanical, electronic and software competences.* The design and detailing of mechanical components and (sub) systems* Managing the Mechanical Designers as a team leader* Specification and outsourcing of specific Development &Engineering activities to engineering services* Documentation of specifications, concepts, designs and analysis results* Coordinating Development & Engineering activities with teams from customers

What does the company expect?You have a master’s degree in mechanical engineering. You have specialist knowledge and experience in one or more areas such as mechanical engineering design principles (FEM) modeling, DFX (feasible, cost-of-ownership, six sigma, etc.) and you are familiar with modern design processes related to mechanical engineering. You worked at least 5 years in a (OEM) machine manufacturing company and / or supplier and have worked with 3D CAD programs such as NX. As a person you are enterprising, goal oriented, creative and make a difference in working either on your own as in a team.

What can the company offer you?The company offers a challenging job, in which you are the frontier of development and realization. You can work with the most advanced systems and modules for various high-tech OEMs. Within this Development & Engineering organization, you can really make the difference. Your contribution to the project is visible to both the internal organization as to the customers. You will have the opportunity to transmit your knowledge and experiences to your colleagues. Strength through Collaboration is their motto!

You have a master’s degree in mechanical engineering.

Contact: [email protected]

WERKbedrijf VenloVacancy: 3991812/17-09-2012Publish until vacancy: 29-10-2012React before: 29-10-2012

Senior System Designer Mechatronics

For an international company with over 7.600 employees we are searching for a senior system designer mechatronics. The company supports worldwide customers and has 81 subsidiaries spread over 18 countries with production facilities in Eindhoven, Sydney, Singapore and Suzhou, China. Their service offering includes development & engineering, prototyping, custom industrial mechanization and mass production of products that are characterized by high complexity and relatively low production numbers. They have extensive experience in markets equipment for the semiconductor industry, thin film deposition equipment for photovoltaic solar cells, analytical instruments, medical systems, aerospace & defense and mechanization projects.

what characterizes this position?As senior system designer mechatronics you are ultimately responsible for the technical aspects of the development of a mechatronic system or subsystem. You represent the company and its technical qualities to clients. In consultation with clients you specify requirements and specifications for the system and its development process. With the support of matching technical modeling and analysis you manage the development on substantive issues on which various concepts are developed and elaborated. After design choices are made, you collaborate with designers and with staff of technical suppliers from both organizations about the detail engineering. Important aspects are manufacturability, cost, reliability and technical performance. In close collaboration with clients you play a central role in the eventual integration of prototypes and series models. You are the first to contact in questions regarding production, integration and service. The uniqueness of this role within the company is, that your design skills can be tested directly in an advanced realization environment!

What does the company expect from you?You have a master’s degree in mechanical or mechatronic engineering. You have 5-10 years relevant experience in design and/or specification of mechatronic modules and systems. Think of the exact positioning and/or manipulation of substrates such as semiconductors.

11


Key words such as Precision Mechanics, Motion Control, Low Contamination, Thermal Management, Tribology, Reliability & Availability and Cost Engineering are everyday terms in your current job. Because of the central role of this position it’s also important to have good communication skills in Dutch and English. As a person you are accurate, flexible and driven by challenges.

What can the company offer you?The company offers a challenging job, in which you are the frontier of development and realization. You can work with the most advanced systems and modules for various high-tech OEMs. Within this Development & Engineering organization, you can really make the difference. Your contribution to the project is visible to both the internal organization as to the customers. You will have the opportunity to transmit your knowledge and experiences to your colleagues. Strength through Collaboration is their motto!

Contact: [email protected] VenloVacancy: 3991012/17-09-2012Publish until vacancy: 29-10-2012React before: 29-10-2012

SENIOR PRODUCT ENGINEERBugaboo International is a dynamic Dutch design driven company. Bugaboo increases people’s mobility and freedom of movement thanks to innovative, functional products. Bugaboo was established in 1999 and is rapidly expanding due to international success. Our headquarters is located in Amsterdam. We have manufacturing facilities in China and offices in London, Milan, Barcelona, Dusseldorf, New York, Los Angeles and Sydney.

location: Amsterdam, the Netherlands

In recent years, Bugaboo’s creative entrepreneurial drive has resulted in a rapid global expansion. To further continue this growth, we are looking for senior product engineers for our innovation centre at our headquarters in Amsterdam. Product Engineers at Bugaboo work closely together with Designers from early on in the product development process to create engineering solutions that support the conceptual product

design and its story. In subsequent development stages, Product Engineers detail the engineering solution to a level with proven feasibility and ready for transfer to our engineering facilities in China. The focus is to find and validate creative technical solutions that fulfill all requirements from the product specification like look & feel, performance, safety, durability, cost and manufacturability. the following tasks apply to the job

• Evaluate technical feasibility of design concepts, based on factors as look & feel, performance, safety, durability, cost and manufacturability;• Create technical requirement specifications for subsystems of the product;• Create multiple technical solutions for product functions in a ”set based”’ way;• Create prototypes and evaluates solutions;• Conduct risk assessments FMEA of the product;• Does preliminary technical validation by calculation, simulation or testing;• Prepare technical data package of the product for handover: 3d files, FMEA, validation reports etc;• Assist in production start-up;• Does research into materials, technologies, and sustainability;• Modify and refine existing products to improve performance or to comply with changed regulations;• Travel to production locations to discuss directly with suppliers and toolmakers about technical feasibility of parts and production methods.

Requirements • Educational background in mechanical engineering;• 5-7 years experience in engineering and supporting pre-production of injection moulded products and construction in plastic and metal;• Excellent understanding of engineering processes from requirements to validation;• Good sense for the relation between design &engineering and overall concept story;• Detailed knowledge of materials and production techniques (technical plastics properties, injection moulding, basic metal production techniques) and engineering of complex constructions in plastic and metal;• Problem solving skills;• Understanding tolerance analyses & calculations for strength en stiffness of parts;

12


• Skilled with Solidworks;• Pro active, social skills and ability to work in a team.- Candidates need to be willing to travel (frequently when necessary) to our production facility in Xiamen (China). Travelling abroad implies that a certain flexibility in working hours can be asked. We offer:The position of engineer is based in Amsterdam, the Netherlands. Therefore, applicants from outside the Netherlands should be willing to relocate to Amsterdam in order to be considered for this position. The conditions of employment and fringe benefits are in line with the job requirements and local market conditions (the Netherlands).


Schweisser Mig/MagFur langere Projekten suchen wir Schweisser Mig/Mag, mindestens niveau 2. Mann soll stahlen Platten und Rohren zusammen schweissen können – gleichmässig und schnell.Sie haben mindestens 3 Jahre erfahrung.Arbeit is bei eine Firma die stahlen Produkten weltweit verkauft. Also Qualität in Arbeit ist sehr wichtig.Sie sprechen Deutsch oder English.Gehalt ist abhängig Erfahrung. Pro Woche incl. Reservierungen € 450 bis € 500 brutto.Arbeitgeber regelt Unterbringing.Interessiert: schicke ein e mail mit Lebenslauf zu: [email protected]

Contact :dhr. VisserGolden QE-Mail [email protected]. 0180-647464

WERKbedrijf DordrechtVacancy: 3923212/12-09-2012Publish until vacancy: 24-10-2012React before: 24-10-2012

PLC SOFTWARE ENGINEER The PLC software engineer plays an important role in specifying the functional and technical specifications of equipment. You will also set the correspondence to flowcharts.

You will also be testing the software on the machines.

For an international high tech organization that develops and assembles PVD and PACVD coating installations we are looking for a PLC Software Engineer. Because of the way of working in projects, every employee will be involved in the full process, from design to installation. The machines operate e.g. with vacuum, sputter and arc evaporation technologies and they are built customer specifically, which makes all jobs challenging and varied. The company we are looking for employs more than 90 people and the company is characterized by direct communication lines and an open, informal culture.

The PLC software engineer plays an important role in specifying thefunctional and technical specifications of equipment. You will also set thecorrespondence to flowcharts. Besides designing, programming and simulating necessary software for the operating system, you will also be testing thesoftware on the machines. From the Netherlands you will take care of service, support and problem solving for the global within your account. Youcollaborates with various other disciplines such as electrical engineering, process engineering and mechanical engineering. You will eventually develop into an all-rounder in the field PLC and HMI software.

You have a university degree in electrical engineering or industrialautomation. You also have extensive knowledge of and experience in programmingPLC systems. Knowledge of SCADA software is a plus.

Demands:You have a university degree in electrical engineering or industrial automation. You also have extensive knowledge of and experience in programming PLC systems. Knowledge of SCADA software is a plus.



13



HMI SOFTWARE ENGINEER For an international high tech organization that develops and assembles PVD and PACVD coating installations we are looking for a HMI Software Engineer. Because of the way of working in projects, every employee will be involved in the full process, from design to installation. The machines operate e.g. with vacuum, sputter and arc evaporation technologies and they are built customer specifically, which makes all jobs challenging and varied. The company we are looking for employs more than 90 people and the company is characterized by direct communication lines and an open, informal culture. The software engineer plays an important role in specifying the functional and technical specifications of machines. Besides designing, programming and simulating software, you also test the software on the machines. From the Netherlands you will take care of service, support and solve faults for our global clients for whom you are the contact point. You work together with various disciplines such as electrical engineering, process engineering and mechanical engineering. You will eventually develop into an all-rounder in the field of HMI and PLC software.

You have a Bachelor of Master Degree in computer science or industrial automation. Knowledge of software like Citect SCADA, Visual Basic 6.0 and VB.NET, and SQL language, including MySQL and SQL Server. You also have thorough knowledge of Windows XP and Windows 7. A project approach and the ability to collaborate with other disciplines. In terms of personality, you are able to perform under stress and are accurate. You master the English language and are willing to learn the Dutch language


Field Service Engineer

As a Field Service Engineer you will be responsible for solving problems, performingmaintenance and installing upgrades at customers sites worldwide. You see it as a challenge to keep customers satisfied, after all, you are the face of the company. Besides giving good service that also means providing the customer in a correct knowledgetransfer and being a good listener towards the customer. Subsequently you givefeedback to your own colleagues concerning specific customers wishes and technical developments. When you aren’t occupied with service tasks, you will assist your colleagues from the Customer Support department and when necessary the Production department.You will report to the Manager Customer Support.

What do we ask?You have a bachelor degree, preferably in electrical techniques. Also you haveseveral years of work experience in a similar job. You have an independent and firmpersonality. Further you have a great sense of responsibility, good analytical skills,feeling for commercial aspects, organizational talent and a customer focused andrepresentative attitude. You speak and write English,preferably German and willing to learn Dutch. Other cultures and international communication challenge you. Finally youare prepared to travel world wide for 50% or more. The actual amount of travellinghowever depends on the amount of incoming orders and work.

Demands: You have a bachelor degree, preferably in electrical techniques. Also you have several years of work experience in a similar job You speak and write English,preferably German and willing to learn Dutch. You are prepared to travel world wide for 50% or more.


Experienced Electrical Engineer Experienced Electrical Engineer who will be working on designing, improving and realizing

14



the electrical part of the coating installation. This especially concerning the interaction between the power supply, the cathode and the control technology.We are looking for an experienced Electrical Engineer that will be working on designing, improving and realizing the electrical part of the coating installation. This especially concerning the interaction between the power supply, the cathode and the control technology. In the coating installation vacuum technology, mechanics, electrics, software and process technology come together. You will reflect your gained knowledge in Machine building on our machines and make proposals for optimization and improvement. You manage projects from scratch to delivery to customers From your own expertise you guide and coach lesser experiences colleagues in their development to experienced Electrical Engineer. You will report to the Manager Electrical Engineering.

What do we ask? A bachelor’s degree in Electrical Engineering or comparable plus knowledge of power Electronics and CE markings, is a must, as is multiple years of experience in Machine building. Knowledge of or affinity with PVD and/or PACVD techniques vacuum technology, mechanics, etc. is an advantage but not a must. You are willing to travel occasionally and you master the English language are willing to learn the Dutch language, German would be an asset. Furthermore it is important that you can work independently as well as in a team. A flexible attitude is essential.

Working for this employer means working within enthusiastic project teams with a lot of initiative, flexibility, independence and responsibility. They offer excellent career perspectives, excellent conditions of employment, a good working atmosphere and personal development of your skills.

Demands: A bachelor’s degree in Electrical Engineering or comparable plus knowledge of power Electronics and CE markings, is a must, as is multiple years of experience in Machine building. Knowledge of or affinity with PVD and/or PACVD techniques vacuum technology, mechanics, etc. is an advantage.


Engineer/Designer As a Design Engineer you work with colleagues in an variety of projects for innovative machinery. You create drafts in Inventor Simulate Software. You are experienced in understanding and setting up all engineering documents, design specifications, purchase specifications and risk analyses.

What characterizes this job?As a Design Engineer you work with colleagues in an variety of projects for innovative machinery. You create drafts in Inventor Simulate Software. You are experienced in understanding and setting up all engineering documents, design specifications, purchase specifications and risk analyses. Next to setting up concepts, your job is to select components for the machinery, carrier over the design of the machinery to the Mechanical Engineer, and control the output. During the prototype phase, you analyze potential improvements and fulfill an advisory role in the testing phase. During the whole process you stay in close contact with customers. What do we ask?You hold a bachelor or master degree in Mechanical Engineering with at least 5 year’s experience in a similar position. You have good physical insight and constructions are familiar territory for you. You are able to think in concepts and translating them into structures. You are a pioneer and approach technical problems in a creative way. Furthermore, you are accurate, flexible, quality conscious, pragmatic and have solid experience with 3D CAD Software.Several years experience in a development and manufacturing environment as in the field of mechanical engineering are a plus.. You are pro-active and can easily adapt in a dynamic work environment. . You speak en write English fluently. You have a passion for technology and see this position as a great opportunity to further develop yourself.Working for this employer means working within enthusiastic project teams with a lot of

15


initiative, flexibility, independence and responsibility.

Demands: -You hold a bachelor or master degree in Mechanical Engineering with at least 5 year’s experience in a similar position. Solid experience with 3D CAD Software


CAD draftsman Job profile CAD draftsman If you have CAD draftsman at Schinck-B & P has a varied and challenging position with a significant portion of responsibility. Depending on the project you work this out independently or in teams. Together with the planner you will be responsible for the development of different tasks. You are closely involved in the development and expansion of our CAD systems. At this moment we work with AutoCAD 2011 Through both internal and external courses is the opportunity you further inside the different fields to develop. Work Your tasks consist primarily of: • Requesting the necessary product information:• developing designs and project plans;• the manufacture of presentation drawings; • the production of detailed workshop drawings • drawing of parts of work. • Preparation of components of cost estimates. Job requirements For the fulfillment of this function we are looking for candidates with: • MBO + / HBO and thinking and knowledge about 1 year work experience; • Knowledge of and experience with AutoCAD 2007/2008; • knowledge of Office 2010 is an advantage; • good interpersonal and communication skills in speaking and writing; • large degree of autonomy, but also in team work spirit; • The customer wants the candidate to stay in NL because if the employee performs his job

well there is a chance that he will be offered permanent employment. • Language: English or German or Dutch speaking and writing very well.

We offer you the following: • a varied and challenging job; • good working environment with ample attention to their workplace;• ample opportunities for personal development;• good primary and secondary benefits.

Company is located in GRUBBENVORST.


Employee Tree NurseryTasks: preparing, organizing and performing all work focused on cultivation and harvesting of crops in the tree nursery, coordination and supervising/coaching assistant employees, thoughtful on growth disturbance of crop, and tasks like clodding en sorting. Minimum requirements are: demonstrable knowledge of and/or experience with work in the nursery, good plant knowledge especially of forest and hague assortment, experience with tractor driving and the use of machinery, knowledge of the English language. Any knowledge of the Dutch language is a plus. Working hours: average 38 hours per week spread over 5 days. Offered: temporary contract from 15-10-2012 till 10-05-2013, payment according CAO Open Crops pay scale E (min. 1767,06 Euro a month) Work location: RijsbergenFor information and/or applications: [email protected]

WERKbedrijf BredaVacancy: 3483812/14-08-2012Publish until vacancy: 15-10-2012React before: 15-10-2012

Engineer Plastics Technical Service One of our clients, Styron Netherlands BV, has an opening for a Technical Service & Development (TS&D) Engineer to support the

16




development, market implementation and quality of Styron plastics. The opening is aimed at supporting customers in a variety of market segments (including Electrical and Lighting, Medical and Sheet Extrusion) for all of the Styron plastics, with primary focus on the Polycarbonate and Polycarbonate compounds and blends.

Job Expectations: As the technical interface with customers, the role has a strong application and product development focus, with additional responsibilities for ensuring product quality meets customer needs, with responsibilities including: Identifying and understanding the end use application needs.Identifying project opportunities, based oncustomer and market needs. Translating identified needs into product and application development opportunities. Developing and implementing new products, applications and fabrication technologies.Development projects to resolve critical quality issues. Developing an understanding the competitive position. Supporting existing business. The job would be based in Terneuzen (NL), The Netherlands and will require you to apply your knowledge of polymers and polymer fabrication technologies on a daily basis. As a member of Styron Plastics Europe’s Technical Service and Development organization, you will also have responsibility for specific development projects, requiring interaction with R&D and TS&D colleagues in Europe and / or globally. You will need to work closely with sales, manufacturing and other functions within Styron, with technical responsibility for a defined group of customers.

Qualifications:Mobile and able to travel approximately up to 25% of the time, essentially within Europe. Minimum education level should be M.Sc. in Polymer.Min M.Sc. in Polymer, Chemical or Mechanical Engineering. 5-10 Years experience in polymer processing, extrusion and/or compounding being preferred. Our offer :* Competitive salaries and comprehensive benefits

* An annual variable pay program that rewards team and individual performance and shares company, business or functional success* On-going learning opportunities in a rewarding work environment* The chance to work on global teams with colleagues around the world and in different locations Styron is a leading global materials company and manufacturer of plastics, latex and rubber, dedicated to collaborating with customers to deliver innovative and sustainable solutions. Styron's technology solutions are used by customers in industries such as home appliances, automotive, building & construction, carpet, commercial transportation, consumer electronics, consumer goods, electrical & lighting, medical, packaging, paper & paperboard, rubber goods and tires. Styron had approximately USD 6 billion in revenue in 2011, with 20 manufacturing sites around the world, and 2100 employees.Relocating to the Terneuzen areaTerneuzen is located in the south west of the Netherlands, close to the Belgian border. Our employees live and work in this area, or live in Belgium (Ghent or Antwerp). Terneuzen is a medium sized town (24.500 residents) located at the Scheldt river. Our agency can assist with relocation by providing you with addresses and info on what you have to do when moving to NL (as well as info on how the tax system works, your contract with us, etc).Contact detailsAre you interested in becoming a member of the TSD team at Styron Netherlands in Terneuzen? Then we would like to ask you to send us your CV and a photograph to [email protected]. For further questions please contact us at +31 115 562230. Contact:dhr. T. de Pootervan De Pooter Axel b.v.E-Mail [email protected]

WERKbedrijf TerneuzenVacancy: 3288212/27-07-2012Publish until vacancy: 27-09-2012React before: 27-09-2012

17


Industrial electricianAs an industrial electrician you will work on both new construction and modernization of electrical switching and control systems used to control different processes. You work in the field on location and you are part of an installation team.

TecLine is an international staffing company specializing in the supply of technically skilled employees with a non-Dutch nationality (blue collar). The sectors where employees are employed in industries such as shipbuilding, refineries, gas and steel production in the Netherlands and Germany. The company has the ISO 4400 quality certificate.You work on the expansion and construction of electrical installations in the industry. From a working drawing to determine the correct materials, tools and activities to be performed. You install cableways and provides them with various types of cables as per drawing or instruction. You finally assemble these cables as cable schedules off on both equipment distributors.

The organization and rewardBefore going to the country of departure we will send you a signed contract, and extensive instruction. Upon arrival we will organize a safety training with which you can obtain a personal VCA safety certificate. With this certificate you will be able to have access to the workplace. With a TecLine service you can expect the following:1. An employment contract based on NBBU (Dutch Association of Employment Agencies) conditions in your own language (see: http://www.nbbu.nl).2. With premium payment in the Netherlands you are both in the Netherlands and in your homeland insured for basic medical expenses.3. We arrange and pay for your accommodations, typically up to 25 miles from your workplace.4. Based on a 40-hour workweek will earn 1800 Euro all-in net per month.

Contact:If you are interested in this job please go to www.tecline.com and register yourself.

WERKbedrijf AlkmaarVacancy: 3285912/27-07-2012Publish until vacancy: 23-10-2012

React before: 23-10-2012

Senior Chemist – Grease Lubricants You will be responsible for leading and performing research on lubricants and how The main activities will be practical involvement in pilot-scale production of experimental grease formulations, performing lubricant property / performance tests with advanced laboratory equipment, management of related projects and consulting on lubrication issues.

As a member of a highly innovative Lubrication Team of 9 research staff, you will be expected to engage and transfer knowledge with many stakeholders in THE COMPANY and also to effectively collaborate with external universities and lubricant suppliers.

You may know THE COMPANY as the world leading supplier of products and solutions in the rolling bearing business. In addition, we are one of the leading players in seals, mechatronics, lubrication systems, and services which include technical support, maintenance services, condition monitoring and training. The inherent skills and competence of our, around 40.000 employees, help us to fulfill our objective of creating more intelligent, sustainable and innovative customer solutions. THE COMPANY is a truly global company with presence in more than 130 countries, serving an extensive range of industries and customers worldwide. Please send your CV a cover letter to [email protected]

Demands:• Masters or PhD degree in Chemistry or Chemical Engineering • Minimum of 3 years working as a chemist with industrial lubricants, preferably having experience with production processes used for commercial greases. • Able to use a wide variety of laboratory test equipment and to interpret data

Contact :dhr C van RuijvenCheckmark Labrecruitment BVE-Mail [email protected]

18


http://www.tecline.com/

WERKbedrijf Utrecht NoordVacancy: 3279912/27-07-2012Publish until vacancy: 19-10-2012React before: 19-10-2012

NDO inspecteursFlexibel Europe Netherlands is a major provider of technical specialists in the following sectors: Non Destructive Testing Services, On and Offshore, Petrochemical, Heavy Construction and Oil and Gas industries.

Flexibel Europe Netherlands is currently looking to recruit for the following positions:

• PCN level 2 Radiography technicians according to EN 473 (RPS, ADR preferable)• PCN level 2, 3.2 , 3.8 and 3.9 Ultrasonic technicians according to EN 473• PCN level 2 MPI/DPI technicians according to EN 473(On all positions Dutch Site safety VCA certificate preferable)

Flexibel Europe Netherlands has jobs in the Netherlands, Germany and Poland for all jobs experience required and speaking the German or English language

• Excellent rates of pay for all disciplines and quality accommodation available.

Contact:Please forward your up to date CV and details of availability to: [email protected]


Lab Technician Trainees in ChemistryThe Analyst Development Program (ADP) is a career program for lab technician trainees with a bachelors or masters degree in chemistry and life sciences industry. The ADP looks a little bit like speed dating: in a period of 3 years, you will work as a QC/research laboratory technician for three different laboratories within reputable companies (ADP partners) in the Netherlands. You will gain a

relatively broad work experience; you learn how to deal with different working environments and you are introduced to different disciplines within the lab world. You combine the work with an extensive training program to increase your technical and managerial skills. This corresponds with a training budget of approximately 12.000 euro.If you hit it off with one of the ADP partners, continuation after you finish the 3 year program may be possible with or without our involvement. However, after the ADP you are not obligated to embark on a career with one of the ADP partners. The program has become so renowned that you can be certain of a job as a senior lab technician after successful completion.The 3 years are not easy! They are challenging from the intellectual point of view as well as from a technical perspective. Therefore you must belong to the top of your graduation class having an average grade of Good or higher. We will also arrange for a psychological test that will take a full day. It is not just the intellectual aspect that counts. We look for top notch candidates and that includes more than just a diploma! We are seeking excellent communicative skills, flexibility, quick learning and thinking abilities, pro-active behaviour and natural curiosity.

We are focussing on retrieving the best candidates from abroad. The candidates we are looking for should fit the profile described below.4 year Bachelor (ECTS 240) or Masters (ECTS 300) title with a specialisation in either: Analytical Chemistry, Environmental Chemistry, Biochemistry, Molecular Biology or Biotechnology. Your average grade is 8,00 or higher.You must have at least 5 months practical laboratory work/internship experience. This must include hands-on experience with at least one of the following advanced laboratory techniques:Chromatography: GC, GC-MS, HPLC, LC-MSElemental analysis: AAS, AES, ICP-OES, ICP-MSBioassays: PCR, RT-PCR, ELISA, SDS-PAGE, IEF, MicroArrays, Cell culturesYou must speak, read and write English fluently. You are eager to learn Dutch after working hours during private lessons in a small group.You are an open minded, pro-active person, with a high emotional intelligence.

19

http://www.flexibeleuropebv.nl/

You are willing to spend 3 years in the Netherlands and willing move within The Netherlands when switching companies.

The ADP is 3 year traineeship in with a fixed gross monthly salary: First year: €2100,- Second year: €2200,- Third year €2300,00. In the Netherlands this means your net monthly income will be approximately €1500. Costs for housing and living (including e.g. health insurance) are at your own expenses.

Demands:We are focussing on retrieving the best candidates from abroad. • 4 year Bachelor (ECTS 240) or Masters (ECTS 300) title with a specialisation in either: Analytical Chemistry, Environmental Chemistry, Biochemistry, Molecular Biology or Biotechnology. Your average grade is "good" or higher.

Contact:For more information contact the Euresadviser; Barbara Gorter - ZahutaE-mail: [email protected]

(Prefab) Steel Fixer Job: Producing concrete steel nets and baskets as a single piece and in series in the day shift based on drawings for the production of concrete elements through MIG/MAG welding.Work takes place in a factory building where it is possible that a somewhat dusty (fine quartz dust) environment can be expected. The work may be heavy from a physical perspective but different (lifting) auxiliary tools are available.

Requirements: Knowledge and understanding in reading structural technical drawings.Being familiar with a MIG/MAG welding machine.

Other recommendations:Having some kind of (motorised) transport including the related driving licence.Being prepared to relocate to the Netherlands temporarily or definitely.Being motivated and performance-focused.Being healthy without physical impairments or failings.

What we offer:Remuneration in accordance with the secondment collective bargaining agreement with a contract through a temporary employment agency.Good fringe benefits.Being employed by the company after a period of time and (possible) one-off reimbursement for the travel to come to the Netherlands.Good (temporary) accommodation at a reasonable distance of the work location in accordance with the CFH (Certified FlexHome) standard.Access to group healthcare insurance with favourable terms and conditions.Brokerage and assistance with issues such as - Finding definitive accommodation. - Completing (tax) returns. - Applying for allowances. - Various training courses including a Dutch language course. - Showing you the ropes with regard to Dutch legislation and regulations.

Demands: Knowledge and understanding in reading structural technical drawings. Being familiar with a MIG/MAG welding machine. Having some kind of (motorised) transport including the related driving licence. Being motivated and performance-focused. Being healthy without physical impairments or failings.


(Prefab) Steel Fixer Starting Vacancy for a soon to be qualified (Prefab) Steel FixerJob: Producing concrete steel nets and baskets as a single piece and in series in the day shift after a training period based on drawings for the production of concrete elements through MIG/MAG welding.Work takes place in a factory building where it is possible that a somewhat dusty (fine quartz dust) environment can be expected. The work may be heavy from a physical perspective but different (lifting) auxiliary tools are available.

20



Requirements: Some experience in reading technical drawings.

Other recommendations:Being motivated and performance-focused.Willing to learn.Having some kind of (motorised) transport including the related driving licence.Being prepared to relocate to the Netherlands temporarily or definitely.Being healthy without physical impairments or failings.

What we offer:Remuneration in accordance with the secondment collective bargaining agreement with a contract through a temporary employment agency.Good fringe benefits.Being employed by the company after a period of time and (possible) one-off reimbursement for the travel to come to the Netherlands.Good (temporary) accommodation at a reasonable distance of the work location in accordance with the CFH (Certified FlexHome) standard.Access to group healthcare insurance with favourable terms and conditions.Brokerage and assistance with issues such as - Finding definitive accommodation. - Completing (tax) returns. - Applying for allowances. - Various training courses including a Dutch language course. - Showing you the ropes with regard to Dutch legislation and regulations.

Demands: Some experience in reading technical drawings. Being motivated and performance-focused. Willing to learn. Having some kind of (motorised) transport including the related driving licence. Being prepared to relocate to the Netherlands temporarily or definitely. Being healthy


(Prefab-)Eisenflechter Von Ihnen wird erwartet, dass Sie in Tagesschicht eigenverantwortlich auf Basis entsprechender Zeichnungen Betonstahlnetze

und –körbe zur Produktion von Betonelementen herstellen, und zwar in Einzel- oder Serienfertigung. Verfahrenstechnisch geht es dabei um das Punktheftschweißen (MIG / MAG). Gearbeitet wird in einer Fabrikhalle, in der möglicherweise eine relativ staubige Umgebung zu erwarten ist (feiner Quarzstaub). Die Arbeit kann körperlich schwer sein, obwohl diverse Hilfsmittel / Hebezeuge vorhanden sind.

Anforderungen: Kenntnisse mit und Verständnis bei dem Lesen technischer BauzeichnungenErfahrung mit MIG/MAG-Schweißgeräten

Profil:Im Besitz eines eigenen (Motor-) Fahrzeugs mit entsprechendem FührerscheinBereitschaft, vorübergehend oder auf Dauer in die Niederlande umzuziehenMotivation und leistungsorientierte ArbeitGute Gesundheit ohne körperliche Beschwerden / Behinderungen

Wir bieten:Vergütung gemäß dem Tarifvertrag für Zeitarbeitskräfte mit einem ZeitarbeitsvertragGute sekundäre Arbeitsbedingungen.Nach einer gewissen Dienstzeit wird (eventuell) eine einmalige Vergütung für die Fahrtkosten gezahltGute (vorübergehende) Unterbringung in einem angemessenen Abstand von der Arbeitsstelle gemäß der CFH-Norm (Certified FlexHome)Zugang zur kollektiven Kranken- und Pflegeversicherung unter günstigen BedingungenVermittlung und Unterstützung bei Aspekten wie - der Suche nach einer definitiven Wohnung - Einreichen von Unterlagen / Steuererklärungen - Beantragen von Zuschlägen - Diverse Schulungskurse, beispielsweise zum Erlernen der niederländischen Sprache - Einführung in die niederländischen Gesetze und Vorschriften

Contact: [email protected] VenloVacancy: 3063712/12-07-2012Publish until vacancy: 04-10-2012

21



React before: 04-10-2012

Eisenflechter (Anfänger) Stellenangebot für einen Auszubildenden zum (Prefab-)EisenflechterFunktion: Nach einer gewissen Anlernzeit wird von Ihnen erwartet, dass Sie in Tagesschicht eigenverantwortlich auf Basis entsprechender Zeichnungen Betonstahlnetze und –körbe zur Produktion von Betonelementen herstellen, und zwar in Einzel- oder Serienfertigung. Verfahrenstechnisch geht es dabei um das Punktheftschweißen (MIG / MAG). Gearbeitet wird in einer Fabrikhalle, in der möglicherweise eine relativ staubige Umgebung zu erwarten ist (feiner Quarzstaub). Die Arbeit kann körperlich schwer sein, obwohl diverse Hilfsmittel / Hebezeuge vorhanden sind.

Anforderungen: inigermaßen Erfahrung mit dem Lesen von technischen Zeichnungen

Profil:Motivation und leistungsorientierte ArbeitLernbegierigIm Besitz eines eigenen (Motor-)Fahrzeugs mit entsprechendem FührerscheinBereitschaft, vorübergehend oder auf Dauer in die Niederlande umzuziehenGute Gesundheit ohne körperliche Beschwerden / Behinderungen

Wir bieten:Vergütung gemäß dem Tarifvertrag für Zeitarbeitskräfte mit einem Zeitarbeitsvertrag.Gute sekundäre ArbeitsbedingungenNach einer gewissen Dienstzeit wird (eventuell) eine einmalige Vergütung für die Fahrtkosten gezahltGute (vorübergehende) Unterbringung in einem angemessenen Abstand von der Arbeitsstelle gemäß der CFH-Norm (Certified FlexHome)Zugang zur kollektiven Kranken- und Pflegeversicherung unter günstigen BedingungenVermittlung und Unterstützung bei Aspekten wie - der Suche nach einer definitiven Wohnung - Einreichen von Unterlagen / teuererklärungen - Beantragen von Zuschlägen

- Diverse Schulungskurse, beispielsweise zum Erlernen der niederländischen Sprache - Einführung in die niederländischen Gesetze und Vorschriften


Welder( all certificates)In all positions from the hand mow seam connections of carbon weld of all types, r.v.s. (=stainless steel) – and alloy material according to the applying Certification Standards. The welder must be able a qualitatively good make mow connection under all circumstances.

He must be able master of the mow processes mentioned below there minimum three entirely:•Electric welding (SMAW) carbon steel80-500• Argon welding (GTAW) Carbon steel 0-80-500• Argon welding (GTAW) stainless steel 0-80• Argon welding (GTAW) stainless steel 80-500• CO2 welding (GMAW) solid wire• CO2 welding (FCAW) cored wireJob discription* LBO level* In possession of valid welding certificates for CS / SS and/or Alloy * Security Certificates (SCC-1)

RegionThe whole Netherlands, Especially the Botlek-Europoort area, Moerdijk and Vlissingen

Contact :dhr. R Wolversvan I Flex Detachering B.V.E-Mail roberto @iflex-uitzendbureau.nl


Assembly worker/ Flange fitter Independent composing, assembling and dismantling pipelines, control parts,

22


appendages and constructions on/at simple process installations. On indication make of simple construction components and helpful is at he activities. In attentive cases assist of the piping engineer at composing control parts.

Function requirementsCraftsmanship levelIn the possession of the certificate flange fitterSecurity certificate (VCA-1)RegionThe whole Netherlands, Especially the Botlek-Europoort area, Moerdijk and Vlissingen

Contact:dhr. R Wolversvan I Flex Detachering B.V.E-Mail roberto @iflex-uitzendbureau.nlWERKbedrijf Dordrecht

Vacancy: 2876112/02-07-2012Publish until vacancy: 04-11-2012React before: 04-11-2012

Pipe engineer (construction) According to complicated drawing independently produce according totesting requirements op pipe and control parts (Ferro, non-Ferro).According to drawing break out, outline, or according to itself-manufactured times, gauges or complicates isometrische sketches ( after inmate) warmly and cold bend in all forms. The spanni to dismantle and assembling pipelines, control parts, appendages and apparatuss, possible on al to kolonnes, kettles, condensers, turbines, pumps, compressors, etc.Also control of the invoked material( quantity and quality. Implementation of the activities the toleration put within.

Function requirements:* Craftsmanship level, Bemetel or perceptible experience* Preferable in the possession of the certificate flange fitter* Can work independently* Security certificate (VCZ-1)RegionThe whole Netherlands, especially the. Botlek-Europoort area ,Moerdijk and Vlissingen

Contact:

dhr. R Wolversvan I Flex Detachering B.V.E-Mail roberto @iflex-uitzendbureau.nl


Machinefitter Independent placing rotating and fine aligns equipmen, the grof of this equipment, connecting the required control work, dismantling and assembling internals of clinchers and securities, and to that the implementation of versions, such as sharpens and rags of meetings etc.

The whole Netherlands, especially: Botlek-Europoort Area, Moerdijk, Rotterdam and Vlissingen* Level level level, Bementel or perceptible experience* Preferably in the possession of the certificate flange fitter* Security certificate (VCA-1)Contact:dhr. R Wolversvan I Flex Detachering B.V.E-Mail roberto @iflex-uitzendbureau.nlWERKbedrijf Dordrecht


MARINE SURVEYORS- Conduct rig acceptance, condition and selection surveys, either independently or as a member of a team. - Arrange start-up and job close-out meetings, draw up reports in the predetermined time schedule, conduct incident investigations and feasibility and maintenance system as required.•Excellent knowledge of the English language, both orally and in writing. (for our Brazil area Portuguese and/or Spanish is required)•Diplomacy and excellent social skills.•Representative appearance.•Computer literacy.•Decision-making abilities.•Team worker.•University level in engineering or comparable level.

23

•University level of knowledge and work experience.•Capability of conducting the surveys independently (or achieving this in the future)•At least 10 years work experience in a relevant position in the drilling or marine industry.

Contact:dhr. Dingemansevan MODUSPECE-Mail [email protected]\

WERKbedrijf WalcherenVacancy: 2833512/28-06-2012Publish until vacancy: 31-10-2012React before: 31-10-2012

ML NXE - SQ Test Technician The sector Manufacturing & Logistics NXE is responsible for the production of scanners as well as for purchasing and logistics. The complete production process of the most advanced machines takes place within this sector. The department System Qualification within NXE is responsible for the assembly and classification of the various machines and modules of the latest ASML systems according to strict quality standards. Job MissionThe Test Technician reports to the system owner within System Qualification. He/she works in small teams and in such cases works together with other departments (D&E, CS, Pilot/Proto, M&L). Job DescriptionTo adjust, test and deliver ASML products or (sub) systems according to agreed specifications and delivery times. You have an important role in achieving quality and output of the most advanced machines in the world. Is responsible for adjusting and testing ASML products and solving problems which may occur whilst maintaining the planned delivery times and quality. Makes suggestions for the improvement of products or production processes with respect to both existing and new products. Lays down product, process and measuring data in protocols and databases. Provides support when new products are introduced into the production process; identifies and reports expected

bottlenecks and solves technical problems, if need be in cooperation with other disciplines. EducationDegree in Electronics, Mechatronics, Applied Physics, on Medium Vocational Level with 0 - 5 years of experience (Tester 1), Medium Vocational Level with 5 - 7 years of experience (Tester 2) or Bachelor degree with 0 - 3 years of experience (Tester 3). ExperienceOptional experience: Vacuum systems, H2, contamination control, complex machine background. Required competences: 1. Accuracy 2. Attention to detail 3. Compliance with procedures 4. Initiative 5. Multicultural communication Personal skills1. analytical skills 2. helicopter view 3. independent 4. flexibility 5. quality driven 6. safety sense Context of the positionAble to work in a multi-disciplinary team within a high-tech environment. Qualification of ASML's latest machines.


Mechanical Install Engineer Equipment build up (Mechanical Install) at the customer site . Operate in a most cost efficient way to build up until system is transferred to the install team. Understand, influence and support good teamwork by the search for solutions and ideas within the build up areas. Represent our client at the customer’s site in a professional way. Deliver high level, complex systems according to the established procedures for complete functionalities of the products and for various product families. Install equipment (complete functionalities and various families) at customer locations, including equipment with new features, unload components, inspect for damage, assemble, align and test.

24


mailto:[email protected]%5C

Evaluate and diagnose problems and make appropriate repairs. Work with co-workers (subcontractors, agents) , customer & local field support in isolating and solving problems. Optimize equipment where applicable. Observe and report about regular and/or on-going problems that occur in the construction of products or their operation. Give support to the solution of these problems. Contribute to the improvement of products and processes. Work in accordance with the installation sequence and installation procedures. Answer customer questions if applicable and assist customers in a professional manner. Advise users of appropriate actions to correct malfunctions and may recommend changes in user procedures. Acquire sufficient knowledge of new and established products and processes, modifications, sub-modules and complete systems. Use this knowledge to aid effective and efficient production and provide sufficient diagnostic knowledge to solve problems as they occur and achieve the correct results.Follow colleague’s training processes. Provide if appropriate support and assistance to less experienced or local personnel as necessary. Transfer technical knowledge of new and existing products to Local CS organization. Actively contribute to the pilot production process and the transition to volume production. Observe and report about anticipated problems that may affect production and qualification capabilities. Closely control the use of tools, materials and equipment. Perform administrative and coordination duties including field service reports, escalations , pass-downs, system problem reports. Prepare written technical reports if required. Experienced MBO (+3yr) or HBO starter. Enterprising, purposeful and flexible. Structured, practical and disciplined, able to work with the available information. Service orientated, good communicator and team worker. Good knowledge of the English language in both reading and writing.Good communication skills with a customer focus for understanding, influencing and supporting them.

Awareness of various cultures and their differences.


Production Engineer Lays down operating instructions, process flow charts, routings, process parameters and indicators. Analyses the production process within Test and Install, points out structural problems and bottlenecks, works out suggestions for improvements and initiates their implementation, often in close cooperation with the surrounded departments as Development, Operations, and Customer Support. Contributes to the rapid solution of complex faults and takes the necessary initiatives and practical decisions. Brings his knowledge to bear on (new) product development projects, in order to foresee production problems in the design phase and in order to improve the reparability of the product and test design. Master: 0-3 years Bachelor: 5-7 years. Experience in a production environment with high tech products and complex production processes. Broad technical and business knowledge. The sector Planning and Manufacturing is responsible for the production of wafer steppers and scanners. The complete production process of the most advanced machines takes place within Manufacturing. The Production Engineering department within this sector introduces new products and corresponding processes from Development into (Volume) production (including the system installation and qualification process at the customer location), continuously adapts and optimizes the production and installation processes and provides support in connection with the organization.


25



Project Leader/Planner Project Leader/PlannerLocation: EerselCompany: Our client is a system supplier in the area of (complex) medical, optical and mechatronic modules for OEM and consumer market. The company is also specialized in development, production, testing and service for logistics and project management. Also design and production of filter and tank installations for the agricultural and chemical industry. Job descriptionAs a Project Leader of you will be responsible for project planning. You have to make sure that the projects will be realised within the arranged delivery time and you have to see to it that the company achieves its targets. You need to communicate effectively with all the people concerned. Proces engineering is also one of your main tasks. You have to keep in contact with customers, you support them and you will contribute to professional, technical solutions (co-engineering). You are also responsible for complex calculations for these projects and you have to see to it that you give a complete cost price calculation to the team of commerce. Personal skills- You are able to work independently as well as in a team.- You are accurate, enthusiast and solution minded.- You are open minded and you have a positive attitude.- Good communication skills and good knowledge of modern language is preferred.- You are able to make (complex) calculations. Experience3 - 5 years working experience. Education level: High school degree mechanical or industrial engineering Contact: [email protected] VenloVacancy: 2770512/25-06-2012Publish until vacancy: 01-10-2012React before: 01-10-2012

Senior Engineer Electronics Factory EngineerLocation: Eindhoven

Company: Our client is a tier-one contract manufacturing partner, delivering high tech capital equipment to leading OEM companies and users of advanced production lines. Their goal is to outperform customer expectations in delivering mechatronic solutions. Their services include development and engineering, prototyping, customer specific factory automation projects and series manufacturing of ‘high-mix low-volume’ products. They operate from 6 manufacturing locations in Europe and Asia. We are currently expanding our development and engineering services.

Job description• You will keep an eye on and you have to improve the quality of the process of the product line. You have to deal with complaints of customers. You have to determine the rootcause of rejections and you need to take correct and preventive measures.• You are responsible for the planning of the relevant production lines. If modifications are needed, you have to adjust the planning.• You have to check and to verify calculations of the assembly part of quotations.• You have to check the quality of the production processes through statistical process analysis methods, such as SPC (statistical process control) and FPY (first pass yield). Especially parameters for HIP (high impact parts) need to be analysed. Moreover, you have to draw up correct plans of action.• To support the technicians in solving technical problems, which occur during the assembly process. You only have to give second line support.• You have to analyse constantly and on the basis of these analyses you have to make technical improvements to realise lower cost prices and lead time reductions.• You have to keep an eye on the requirements for testtooling for qualification of the modules and systems

Experience- You have knowledge of production- and assembly processes in a mechatronical environment- You can work with lean, spc, fmea, control plan and so on- You have several years working experience in a production environment Personal skills- You are analytical

26


• Education level : University degree in electrical engineering • 5 to 10 years in design of electronic control systems and components for high-end equipment and/or products, in multidisciplinary development teams Personal skills • Team player, analytical, pragmatic, creative.


Researcher Ink and Printhead Researcher Ink and Printhead Interactions Job ID #: 229 Position Type: Full-Time Regular Location: Limburg (NL) Education Required: Not Indicated Functional Area: Research & Development Experience Required: None Position Description Researcher Ink and Printhead InteractionsInventing and implementing ink-based solutions

The Consumables and Processes (C&P) department is part of Océ’s Research and Development organization (800 employees) in Venlo. C&P assures the development of competitive products by realizing the involved print (imaging) processes with the right print quality and reliability. C&P also takes care of development and engineering of the strategic consumables and modules that are essential in the printing process. C&P makes the design and realizes the (process) technology that is needed.

Your roleWe are working on technological breakthroughs to enlarge the application range of our inkjet technology. Important issues to realize this are accuracy, productivity and durability of the ink jet heads, an outstanding print quality and a robust and versatile printing process.Another important issue is the enlargement of the application range of our printing technology, next to document printing and the printing of technical drawings and posters on paper, this is about printing on billboards and

exploring new application areas like industrial printing. For this we have to develop new inks and investigate the interactions between inks and printheads and between inks and substrates.

Based on discussions with colleagues from multiple disciplines - like mechanical engineers and physicists – it’s you to determine the relevant research topics for your product development project(s). You will be part of a team that focuses on a research topic. You will work in a multi-disciplinary project team with other physicists, mechanical engineers, chemists and people who have a background in electronics and software. Together you will realize these new elements and proof the feasibility in test equipment and prototypes of the new printers. Where relevant you will work together with external parties or for instance production or service engineers.

We have several opportunities for:• Bachelors and Masters/PhD’s in the field of Physics or Chemistry (Material or Polymers)• With a max of 5 years of relevant work experience• Team players who feel comfortable in a multidisciplinary environment• You are pragmatic and result-oriented, without compromising the quality of your work • With your independent attitude and enthusiasm you bring topics up for discussion, and convince others with your ideas • You have good social and communication skills

Our OfferWe offer you a job in an informal environment, where we work in multidisciplinary teams on our product development projects. For designing and engineering print systems you have discussions with mechanical engineers, physicists, electrical engineers and software engineers. We consider the development of our ink and printhead technologies as very important, since they are essential for realizing successful products. We offer you also the opportunity to develop yourself in our organization. Possible next steps can be in a technical direction, project management or people management.

About Océ Océ is one of the world's leading providers of document management and printing for

27


professionals. With headquarters in Venlo, The Netherlands, Océ is active in over 100 countries and employs more than 20,000 people worldwide. In 2010 Océ joined the Canon Group of companies to create the global leader in the printing industry. For more information, please visit www.oce.com.


Process Engineer Process Engineer Job ID #: 233 Position Type: Full-Time Regular Location: Limburg (NL) Education Required: Not Indicated Functional Area: Research & Development Experience Required: Not Indicated Position Description Challenge for a chemist with interest in processes and manufacturing

The Consumables and Processes (C&P) department is part of Océ’s Research and Development organization (800 employees) in Venlo. C&P assures the development of competitive products by realizing the involved print (imaging) processes with the right print quality and reliability. C&P also takes care of development and engineering of the strategic consumables (like ink) and modules that are essential in the printing process. C&P makes the design and realizes the (process) technology that is needed.

Your roleIn our product development projects we are working on technological breakthroughs to enlarge the application range of our inkjet technology and our printing technology. The development of new inks and investigating the interactions between inks and printheads and/or substrates are very important.

For our products (e.g. new inks or printheads) in development you are designing and implementing new production processes and the realization of equipment involved. You are member of one or our product development projects, knowing the functionalities of the product. You represent R&D and together with

your colleagues of Manufacturing you take care of factors like productivity, yield, cost price and equipment reliability. You test and proof the feasibility the process in one of our pilot plants. In case of issues you come up with solutions. When the process can be implemented you assign it to Manufacturing.

We have several opportunities for:• Bachelors and Masters/PhD’s in the field of Chemistry / Chemical Engineering• With a max of 5 years relevant work experience• Team players who feel comfortable in a multidisciplinary environment• You are pragmatic and result-oriented, without compromising the quality of your work • With your independent attitude and enthusiasm you bring topics up for discussion, and convince others with your ideas • You have good social and communication skills

We offer you a job in an informal environment, where we work in multidisciplinary teams on our product development projects. For designing and engineering print systems you have discussions with mechanical engineers, physicists, electrical engineers and software engineers. We consider the development of our ink and printhead technologies as very important, since they are essential for realizing successful products. We offer you also the opportunity to develop yourself in our organization. Possible next steps can be in a technical direction, project management or people management.

Océ is one of the world's leading providers of document management and printing for professionals. With headquarters in Venlo, The Netherlands, Océ is active in over 100 countries and employs more than 20,000 people worldwide. In 2010 Océ joined the Canon Group of companies to create the global leader in the printing industry. For more information, please visit www.oce.com.


Software Developer

28


http://www.oce.com/


http://www.oce.com/

In one of our R&D projects you are developing controller software, which is used Software Developer Job ID #: 163 Position Type: Full-Time Regular Location: Limburg (NL) Education Required: Masters Degree Functional Area: Information & Communication Technology Experience Required: Less than 1 year Software is involved in all aspects of a document production system. The heart of a printing system is the so-called ‘workflow controller software’, dealing with the dynamics of user interaction, bitmap data processing and device control. This is the work of one of our departments within Software Systems (± 300 employees) at Océ R&D in Venlo.

Your jobIn one of our R&D projects you are developing controller software, which is used for several production printing systems. In your project you are responsible for the software design; thinking about the functionalities, the design and make it work. You define the requirements for your concepts, and translate them into a software design. Because software is highly integrated within other interfaces and applications you have a lot of interaction with other experts, like software architects and other domain experts.You’re responsible for delivering a quality product while keeping the overall system goals in mind.What’s more is that development takes places at multiple sites, and in consultation with external parties. It entails thinking about advanced software for our products, and making them ready for use.

Who are we looking for?• MSc, PdEng or PhD degree in Computer Science, Informatics or comparable,• Maximum of 5 years relevant work experience• Familiar with Object Oriented Design concepts and methods, and you have experience in Java and C++. • Teamplayer, pragmatic, pro-active and good communications skills• Enthusiastic, ambitious to develop yourself to the max.

We offer you a job in an innovative environment where we are working with the

latest technologies and in highly complex projects. All activities of software development are dropped in: integration, verification, architecture, design, implementation and project management. In an informal environment you can express your ideas and get the chance to make them work. Looking to future of your own development we offer a range of possibilities in the field of software architect, project leader, and manager.



Thermodynamic Designer Thermodynamic Designer Job ID #: 204 Position Type: Full-Time Regular Location: Limburg (NL) Education Required: Masters Degree Functional Area: Research & Development Experience Required: Less than 1 year Position Description Thermodynamic Designer

Have you ever heard of CrystalPoint ® Technology?Océ produces the world's fastest and most productive digital printer systems. For instance, based on Océ CrystalPoint® technology, our wide format systems combine bright colors, speed and scalability to take applications of the customer to new heights. At our own R&D locations, with 1500 employees worldwide, all these products are invented and engineered. Our main Mechanical Development departments are located in Venlo. These departments are responsible for the mechanical, mechatronic and thermodynamic designs within our print

29


systems. For one of these departments we are looking for a thermodynamic designer, who has the ambition to bring in innovative print system solutions and is looking for a job where market and customers always directly influence the technical concepts.

What is your job about? Thermodynamics play a crucial role in the development of Océ Printers. Heat, for instance, is necessary to fixate and dry ink on to paper, cold air plays a role in the cooling of paper.As a thermodynamic designer, you are working in a multidisciplinary project. This means that your thermodynamic design has to fit in an overall multidisciplinary design. Within your team you are responsible for problems about the air, heat and energy management in a print system. Therefore you use your knowledge of thermodynamics and modeling to create a concept and/or solve a problem within the boundaries set by the project. As a thermodynamic designer, you come up with keen design solutions that make our printers more sustainable. You are looking for a job where you have a lot of freedom in designing solutions. Thereby you see it as a challenge to improve our current thermodynamic designs.

Is this the job you are looking for?You hold a Msc. in the field of thermodynamics, or you are a PhD. Thereby you like to design solutions and you have an extended knowledge of thermodynamic processes and modeling. You are able to convert this knowledge into concepts, and into working solutions. Also, you are acquainted with subjects around energy efficiency. You can describe yourself as entrepreneurial, communicative, proactive and quality oriented. Also, you like to work in a team. In your role you take your responsibility regarding thermodynamic problems and you are able to discuss multidisciplinary designs with team members from the other disciplines.

We offer not only a challenging post within an international company, but above all a career with very good perspectives and personal development opportunities.

Océ is one of the world's leading providers of document management and printing for professionals. With headquarters in Venlo, The Netherlands, Océ is active in over 100

countries and employs more than 20,000 people worldwide. In 2010 Océ joined the Canon Group of companies to create the global leader in the printing industry. For more information, please visit www.oce.com.


Technical Lead Software Venture Technical Lead Software Venture Job ID #: 256 Position Type: Full-Time Regular Location: Limburg (NL) Education Required: Not Indicated Functional Area: Other Experience Required: 5 - 7 Years The product Serenga supports people working together in document-intensive collaboration processes by offering intelligent case management tooling. Serenga is set up as an internal venture, part of Océ Technologies in the Netherlands. To realize our ambitious plans we are looking to extend the venture team of 8 people with a

Technical Lead Software VentureDriving the technical development of a new business intiative

Your jobYou are assuring the successful technical execution of the business mission through development of Software (as a Service).

Together with your colleaguages of the management team and a team of developers you explore new opportunities and develop business concepts that contribute to the future success of the venture. Next to that you make sure that business objectives of today are realized.

You drive the development of applications and services by identifying, prioritizing and establishing development initiatives and setting timetables. With your team you are responsible for development of software designs and delivering the applications and/or solutions in time. As the lead of your team you

30


http://www.oce.com/

are responsible for the progression and the quality of the software development, both in your own team and by external partners.

Thereby you maintain up-to-date knowledge of technology standards, industry trends, emerging technologies, and software development best practices. Also, you share knowledge, mentor, and educate the organization’s investors, management, partners, and stakeholders with regard to the venture’s technological vision, opportunities, and challenges. You act as a true entrepreneur and lead technologist.

Our offerWe offer a unique challenge in a brand new venture where you can drive technology. You are looking for a job where you can lead development, come up with new ideas and opportunities and where you can push the limits. Your personal development opportunity is hugh and your growth depends on the success of the venture and vice versa. We offer you the opportunity to be an entrepreneur, building on the strengths of the Océ organization.

Who are we looking for?- You have a Bachelor or Master degree in the field of Computer Science - You have about 5 years working experience managing (web) application development (e.g. project leader) and you are familiar with development methods like Scrum and Agile- You are ambitious, open-minded and have a creative ‘can-do’ mentality- With your leadership and management qualities you inspire your team, you deliver software and services in time, and you realize the business goals- With your strong communication skills you are able to convince internal and external technical and business stakeholders


Contact: [email protected] Venlo


Software Tester, BSc or MSc degree Software Tester Job ID #: 192 Position Type: Full-Time Regular Location: Limburg (NL) Education Required: Bachelors Degree Functional Area: Research & Development

Position Description Software is involved in all aspects of a document production system. At Océ R&D in Venlo, the departments of Software Systems drive all activities of software development; integration, verification, architecture and project management of software packages. Currently we are looking for a Software TesterHave we made a software (sub)system correctly?

Your roleYou are responsible for an effective verification of a software (sub)system. And therefore, your role is essential during all stages of the product-development process.

In a team you are working on one of our product development projects. As a Software Tester you take care of all phases of the testing process. You are involved in reviewing requirements and functional specifications to prevent defects in early stages and to define testspecifications.Based on its system design and requirements you clearly define/refine a test strategy and a test plan for the verification of the software (sub)system. In order to proceed you discuss your plan with the team members. You specify the test cases to be implemented and create the detailed test specifications. You set up and manage the test environment, consisting of resources, IT-infrastructure, test framework and automated test scripts.During testing you report every defect with logging to your project members and help during analysis and reproduction of the problem. You report to all stakeholders about problem areas and give a reliable opinion about the quality, functionality and usabillity.

Our offer

31


http://www.oce.com/

We offer you a job in an innovative environment where we are working with the latest technologies to develop top of the line products. Thereby will our cooperation with Canon offer you interesting challenges, for example the integration of our software in their products. Within our organization you get the chance to develop yourself. Your personal growth can be in a technical direction (e.g. architect ore specialist) or managerial direction (e.g. team leader, project leader).

Your profile• BSc or MSc degree for example in Computer Science, Electronics, Biomedical Engineering • max of 5 years work experience, and excited to explore the domain of printers and printer workflow • an ISTQB certificate in software testing would be advantageous • strong affinity with testing and software • strong analytical skills, quality-driven, pro-active and ambitious • well organized, team player and able to cope with stressful situations• feeling comfortable in a multidisciplinary and informal organization• good communicative skills

About Océ Océ is one of the world's leading providers of document management and printing for professionals. With headquarters in Venlo, The Netherlands, Océ is active in over 100 countries and employs more than 20,000 people worldwide. In 2010 Océ joined the Canon Group of companies to create the global leader in the printing industry. For more information, please visit www.oce.com.


General C Nurse DPZ (Direct Personeel voor de Zorg) is an experienced company from the Netherlands, which mediates jobs in the health care department. We help qualified health care professionals to find a sustainable job in hospitals, elderly homes and home-care organizations.

Our motto is: 'Your care in our hands'. We have chosen these words because they refer to our goal to provide our candidates a personal approach, a high professional standard and a trustful partner. Do you feel comfortable in an international environment? Do you like challenges? Are you willing to move for a longer period to the Netherlands? DPZ provides an International Working Programme INTENTIO which helps you to find a decent job in the Dutch health care department. We offer a proposal of the following:- No entre fees - Work position guaranteed for at least one year.- Intensive fourteen-week long Dutch language course. - Integration program to Dutch culture - Pocket-money during the training period- Assistance in daily life - Help to find an accommodation - Professional upgrade course (if necessary)If you want to register or would like some more information, please send your CV to: [email protected]

Currently, we are looking for enthusiastic candidates who fulfil the following qualifications: - Diploma in relevant field of studies- Professional experience - Willingness to move to the Netherlands- Willingness to learn the Dutch language - Communication skills in English or GermanSalary on request, depending on experience Working Conditions are in conformity with the Dutch standardsContact: mevr. H. Feijenvan DPZE-Mail info @directpersoneelvoordezorg.nl


Operating Theatre AssistantTasks include: strict sterilization techniques for surgical instruments and equipment along with patient care that includes washing, shaving and disinfecting the incision sites.

32


http://www.oce.com/

Operating Room Technicians (ORT) may also be involved in the transportation of the patient and setting them up initially for the operation. During the operation, operating room technicians work side by side with surgeons and nurses while providing sterile instruments and supplies to the surgical team as needed. They may also be involved directly in the operation by holding retractors or preparing samples of specimens for delivery to the laboratory. Part of the job may also include the reordering and restocking of supplies from the central supply unit after a surgery has taken place. The job will contain different shifts and settings. We are also looking for: Nurse EndoscopyNurse GeriatricsNurse Intensive Care Unit (ICU)

DPZ (Direct Personeel voor de Zorg) is an experienced company from the Netherlands, which mediates jobs in the health care department. We help qualified health care professionals to find a sustainable job in hospitals, elderly homes and home-care organizations. Our motto is: 'Your care in our hands'. We have chosen these words because they refer to our goal to provide our candidates a personal approach, a high professional standard and a trustful partner. Do you feel comfortable in an international environment? Do you like challenges? Are you willing to move for a longer period to the Netherlands? DPZ provides an International Working Programme INTENTIO which helps you to find a decent job in the Dutch health care department. We offer a proposal of the following:- No entre fees - Work position guaranteed for at least one year.- Intensive fourteen-week long Dutch language course. - Integration program to Dutch culture - Pocket-money during the training period- Assistance in daily life - Help to find an accommodation - Professional upgrade course (if necessary)If you want to register or would like some more information, please send your CV to: [email protected]

Currently, we are looking for enthusiastic candidates who fulfil the following qualifications: - Diploma in relevant field of studies- Professional experience - Willingness to move to the Netherlands- Willingness to learn the Dutch language - Communication skills in English or German

Contact: mevr. H. Feijenvan DPZE-Mail info @directpersoneelvoordezorg.nl


33

operatieassistent m/v - eures · web vieweurohealthcare will pay all cost. after a few months (time...

Documents