The Pratt & WhitneyDistinguished Lecture

APRIL 26, 2019 2:30 PM BIOPHYSICS BUILDING BPB 131

Refreshments will be served prior to the lecture.

Dep

artm

ent o

f Mec

hani

cal E

ngin

eerin

g 19

1 A

UD

ITO

RIU

M R

OA

D, U

NIT

313

9S

TOR

RS

, CT

0626

9-31

39

AD

DR

ES

S S

ER

VIC

E R

EQ

UE

STE

D

Professor Ronald K. HansonCLARENCE J. AND PATRICIA R. WOODARD PROFESSOR OF MECHANICAL ENGINEERING, STANFORD UNIVERSITY

New Strategies for Laser Diagnostics and Shock Tube ImagingPRESENTED BY

The Mechanical Engineering Department established the Pratt & Whitney Distinguished Lecture in 2010 with a gift received from UTC Pratt & Whitney. Each year, a well-known authority in one of the technological areas related to gas turbine engines and aero-propulsion is invited to present a lecture at UConn. The invited speaker spends one day visiting UConn Mechanical Engineering and delivering the Distinguished Lecture and a day-long visit at Pratt & Whitney Engineering and United Technologies Research Center. UConn is one of the academic Centers of Excellence of Pratt & Whitney. The UConn center focuses on Diagnostics, Sensing and Control of Aero-propulsion Systems. Mechanical Engineering faculty, graduate students and postdoctoral researchers are engaged in a number of research projects spanning these topics. The Collins Aerospace division of UTC has also participated in this center by funding a number of research projects.

The Department of Mechanical Engineering at the University of Connecticut

PRESENTED BY

This presentation will introduce two new ideas for laser diagnostics applicable to combustion and propulsion and two new ideas for high-speed imaging of combustion phenomena in a shock tube. The first laser diagnostic to be discussed is Spectrally-Resolved Fluorescence, in which a narrow-linewidth wavelength-tunable laser source is rapidly scanned over one or more absorption transitions, allowing collection of a spatially resolved laser-induced fluorescence signal that reflects the strength and shape of the absorption feature. This diagnostic can potentially provide accurate determinations of temperature, pressure, flow velocity and the concentration of the absorbing species. The example to be presented will be of OH excited and detected in the ultraviolet (UV). The second new laser diagnostic utilizes a narrow-linewidth infrared laser source that can be scanned rapidly over a relatively wide wavelength range, thereby enabling acquisition of spectral absorption cross-sections over a full rovibrational absorption band of combustion-relevant species in a short time (a few milliseconds), compatible with the test times available in reflected shock wave experiments. The goal of the experiments is to generate a unique data base for cross-sections over a wide range of temperature, not feasible in a heated static cell. Two other experiments will be presented, both based on imaging of shock-heated gases. In the first

Pratt & Whitney Distinguished Lecturers 2018 Prof. James F. Driscoll, University of Michigan2017 Prof. Vigor Yang, Georgia Institute of Technology2016 Prof. Brian Gleeson, University of Pittsburgh2015 Prof. Karen Thole, Pennsylvania State University2014 Prof. Edward M. Greitzer, Massachusetts Institute of Technology2013 Prof. Parviz Moin, Stanford University2012 Prof. Donald Wuebbles, University of Illinois, Urbana-Champaign2011 Prof. Michael Dunn, Ohio State University2010 Prof. Sebastien Candel, Ecole Centrale Paris me.engr.uconn.edu

New Strategies for Laser Diagnostics and Shock Tube Imaging

experiment, high-speed imaging is used to visualize and characterize aspects of inhomogeneous ignition that can occur in reflected shock wave experiments of hydrocarbon fuel ignition; such inhomogeneous ignition is undesirable and can contaminate data sets aimed at providing high-quality information on ignition delay times. As a second example of imaging in a shock tube, a new experiment will be introduced that measures the burning velocity of a flame produced by laser ignition of combustible gases behind a reflected shock wave. The objective is to enable flame speed measurements at elevated temperatures not accessible with conventional flame speed techniques. Such conventional methods are limited by the partial reaction of the mixture that occur during the lengthy period of preparing reactive mixtures, whereas with a shock tube experiment the time interval between shock wave heating and ignition can be adjusted to be quite small. Results obtained in heptane-air flames provide clear evidence of cool flame effects not previously seen in flame speed experiments. In current work, the observation of flame speed from the time-resolved position of chemiluminescent emission is also being augmented by various laser absorption diagnostics to additionally characterize the burned gases behind the flame.

Professor Hanson received his bachelor’s degree from Oregon State University in mechanical engineering and his doctoral degree from Stanford University where he currently holds the Woodard Chair in Mechanical Engineering. He has been an

international leader in the development of laser-based diagnostic methods for combustion and propulsion, and in the development of shock tube methods for accurate determination of chemical reaction rate parameters needed for modeling combustion and propulsion systems, and together with his students he has made several pioneering contributions that have advanced the pace of propulsion research and development worldwide. He is a Fellow of AIAA, ASME and OSA, a member of the National Academy of Engineering, and a recipient of gold medal awards from the Combustion Institute, the Institute for Dynamics of Explosions and Reactive Systems, and multiple gold medals from the AIAA. He has published over one thousand papers and advised over 100 doctoral students, including 31 now holding faculty appointments around the world.

Professor R. K. HansonTHE 2019 PRATT & WHITNEY DISTINGUISHED LECTURER