mx2 training program 09 displaying data
TRANSCRIPT
-
8/19/2019 MX2 Training Program 09 Displaying Data
1/34
OmniScan MX2 Training Program
Displaying Data
-
8/19/2019 MX2 Training Program 09 Displaying Data
2/34
2
MX2 Training Program - Displaying Data Overview The MX2 data view area displays the various ultrasonic data views with
preconfigured layouts.
A data view is a 2D graphical representation of the ultrasonic data with a ruler orscale corresponding to the horizontal and vertical axis.
Data views available in the MX2 are: Ascan. !ltrasound axis vs. a"plitude axis.
#scan. !ltrasound axis vs. scan axis.
$scan. !ltrasound axis vs. index axis.
%scan &' degree or linear angle( )ndex axis
vs. scan axis.
%scan &$scan( *ocal law vs. scan axis.
$trip charts.
+ay tracing.
A layout is a preconfigured window with
one or "ore data views. ,ictured to the left is the A$-% layout
pictured with "ultigroup &$/ew 0' and
21'( configuration typical of the %obra
s"all dia"eter piping inspection.
-
8/19/2019 MX2 Training Program 09 Displaying Data
3/34
3
MX2 Training Program - Displaying Data – Single Group Data views of a single group are selected fro" the available layout list in the
Display$election3ayout sub "enu.
4hen a T5*D group is selected only the Ascan and #scan are available.
3ayout lists for phased array single group display are available depending on the
current setting in Display$election6roup Display$ingle.
-
8/19/2019 MX2 Training Program 09 Displaying Data
4/34
4
MX2 Training Program - Displaying Data – Single Group cont. )n 5"ni,%7 fro" a single group view7 layouts are also selectable fro" by clic/ing
on the title bar and selecting fro" the list.
Rigt clic! ontitle "ar
-
8/19/2019 MX2 Training Program 09 Displaying Data
5/34
5
MX2 Training Program - Displaying Data - #ayouts cont.
A short stro/e of the display
function /ey will toggle theactive view by "oving the touch
screen "ode indicator to the
next data view.
A long stro/e of the display
function /ey will open theDisplay$election sub "enu.
-
8/19/2019 MX2 Training Program 09 Displaying Data
6/34
6
MX2 Training Program - $-scan Data %iew
The Ascan is the source fro" which all other views are created.
The Ascan data view is the 2D wavefor" representation of the receivedultrasonic pulse a"plitude vs. ti"e of flight.
The MX2 uses an 8 bit &'9'' a"plitude( resolution for the digitized A
scan and 9' bit &'2'' a"plitude( for the gate readings and %scan.
A"plitude axis resolution between '9'' is '.; &2 9''
incre"ents( ?orizontal axis resolution is deter"ined by the !T range and point
@uantity entered in !TAdvanced,oints. &MX2 default is 2' points(
Time ruler
Soun& pat ruler
True &ept ruler 'MX2 &e(ault)
2 * + l i n e s , .
/ r e s o l u t i o n
0ustomi1a"le point uantity
'MX2 De(ault 32)
-
8/19/2019 MX2 Training Program 09 Displaying Data
7/34
7
MX2 Training Program - Displaying Data - $-scan 0ustomi1ation The Ascan color can be "odified in DisplayBiew $ettings for available
colors.
Ascan ele"ents such as gates7 T%6>sizing curves7 angle7 and s/ip lines
can be hidden fro" the display in the Display5verlay sub "enu.
A grid on the Ascan can be displayed and custo"ized in
Display,roperties %ategory6rid $ettings sub "enu.
4/ re(erence amplitu&e
Gate $
0ustomi1e& gri&
5 u l l S ! i p l i n e ' T 6 )
7 S ! i p l i n e ' 8 O )
T 0 G 0 u
r v e
True Dept Ruler
0 o l o r P a l e t t e
$ctive &ata view, Touc screen mo&e
$ngle9%P$
$ m p l i t u & e t r a c e
-
8/19/2019 MX2 Training Program 09 Displaying Data
8/34
8
MX2 Training Program - Displaying Data - $-scan :nvelope
The green a"plitude
envelope trace ispresent on the Ascanwhen selected inDisplay5verlayAscanCnvelope.
The envelope feature is
useful for pea/ingsignals and for dyna"icor live analysis.
A short stro/e of theenvelope function /ey
will clear the currentenvelope. A long stro/e of the
envelope function /eywill enable or disable iton the Ascan.
: n v e
l o p e
-
8/19/2019 MX2 Training Program 09 Displaying Data
9/34
9
MX2 Training Program – Displaying Data – $-scan Point ;uantity
The higher the point @uantity the better the resolution on the Ascan.
The point @uantity is a co"pro"ise between file size and Ascan resolution. 2'=;' points is sufficient for the "ost co""on inspections and ensures
precision readings.
The Ascan point
@uantity default settingis 2' points and can
be "odified in
!TAdvanced,oint
uantity.
The higher the pointcount7 the better the
flaw characterization.
-
8/19/2019 MX2 Training Program 09 Displaying Data
10/34
10
MX2 Training Program – Displaying Data – $-scan Movie
-
8/19/2019 MX2 Training Program 09 Displaying Data
11/34
11
MX2 Training Program - Displaying Data - $mplitu&e 0olor Palette The Ascan is the data view fro" which all other views are based. The #scan
$scan7 and %scab convert a"plitude to color coded pixels based on the 2D
views. The %scan can be configured for an a"plitude or position 2D representation of
the Ascan data.
The ruler to the right displays the MX2 default a"plitude color palette. ' 9''
a"plitude vs. a scaled color palette typical of a"plitude based acceptance
criteria.
-
8/19/2019 MX2 Training Program 09 Displaying Data
12/34
12
MX2 Training Program - Displaying Data - 0olor Palette cont.
The MX2 flashcard contains additional color palettes for applications such
as corrosion "apping7 +* rectified data7 T5*D7 and other color sche"es. The MX2 color palette can be changed in Display,roperties
%ategory%olor ,alette3oad.
%usto" color palettes can also be created fro" third party software suchas the Cclipse $cientific C$,alette ,rogra" &www.eclipsescientific.co"(
and loaded fro" the flash card. &!ser>palette folder(
http://www.eclipsescientific.com/http://www.eclipsescientific.com/
-
8/19/2019 MX2 Training Program 09 Displaying Data
13/34
13
MX2 Training Program - Displaying Data - S-scan The MX2 $scan is a 2D end view of ultrasound data presenting all Ascans within
the group in an angular sector or sweep range creating a cross section of the
inspection.
The Ascans are converted to color coded lines representing a"plitude and are
corrected for delay and true depth relative to the ultrasonic axis.
?igher Ascan density &*ocal 3aw#ea"Angle $tep( results greater resolution.
All infor"ation contained in the Ascan can be visualized in the $scan. ,oint
@uantity and a"plitude resolution are not co"pro"ised. The $scan is also a for" of Dscan or end view. &!ltrasound axis vs. index axis(
True &ept S-scan
-
8/19/2019 MX2 Training Program 09 Displaying Data
14/34
14
MX2 Training Program – Displaying Data - S-scan cont. The MX2 $scan is the only data view capable of displaying the weld overlay.
The $scan data interpolation between independent Ascans is a /ey feature thatseparates the MX2 fro" its co"petitors.
G a t e $
5ull s!ip line 'T6)
6=2 s!ip line '8O)
>el& overlay
D a t a c u r s o r
> e l & c e n t e r l i n
e. * &
e g r e e
+ - & e g r e e
? - & e g r e e
-
8/19/2019 MX2 Training Program 09 Displaying Data
15/34
MX2 Training Program – Displaying Data – S-scan Movie
15
-
8/19/2019 MX2 Training Program 09 Displaying Data
16/34
16
MX2 Training Program – Displaying Data - 8-scan
The MX2 #scan data view represents the ultrasonic data with a proEection of the
scan axis and the ultrasound axis for one focal law or Ascan only. The vertical ultrasound axis is generated fro" the co"plete Ascan range &Fot gate
range( and the horizontal scan axis is generated fro" the "ove"ent of the probe.
The #scan is an uncorrected data view that allows the s/ip lines '7 T97 etc( and
gate position to be displayed on the data.
The T5*D #scan is explained in detail in the T5*D special applications section.
8-scanScan a@is < l t r a s o u n & $ @ i s
' < T R a n g e )
'Pro"e movement)
<ltrasoun&
$@i
s'<TRange)
' P r o " e
m o v
e m e n
t )
Si&e %iew
6=2 s!ip line '8O)
5ull s!ip line 'T6)
-
8/19/2019 MX2 Training Program 09 Displaying Data
17/34
17
MX2 Training Program – 8-scan (or >el& Anspection
!sing the A#-% layout7 a co""on weld analysis strategy is to use the data
function /ey to display the angle selector para"eter in the upper left indication
area and using the scroll /nob7 toggle through each angle while dyna"icallyvisualizing the #scan.
This type of #scan analysis is particularly useful for characterizing crac/ tips and
for separating geo"etric reflectors such as the weld root and cap fro" weld flaws.
*6 &egree 8-scan
*6 &egree $-scan
0-scan '$ll (ocal laws)
-
8/19/2019 MX2 Training Program 09 Displaying Data
18/34
18
MX2 Training Program – Displaying Data - 8-scan cont.
The pri"ary display for viewing T5*D data is also the #scan.
The T5*D #scan is explained in the applications section for T5*D.
TO5D 8-scanTO5D $-scan
-
8/19/2019 MX2 Training Program 09 Displaying Data
19/34
19
MX2 Training Program – Displaying Data – 8-scan Movie
-
8/19/2019 MX2 Training Program 09 Displaying Data
20/34
20
MX2 Training Program – Displaying Data- 0-scan Overview
*or all three options listed above
both a"plitude and position %
scans are available.
The %scan gate data can be
saved independently with or
without the digitized Ascan.$aving only the %scan data
results in faster ac@uisition speed
and s"aller data file size.
*ile saving options are covered in
the inspection preparation section.
The type of %scan available for the group depends on the type of focal law
configuration that was selected during the group and focal law wizard or in the
*ocal 3aw%onfiguration3aw%onfig para"eter. There are options:9. $ectorial Angular $ector &MX2 default $scan(
2. 3inear $ector &Cscan at angle(
. 3inear at ' degrees &Cscan at ' degrees(
The %scan is generated based on the gate position and gate "ode. %scans can
be configured for gate A and gate # independently.
-
8/19/2019 MX2 Training Program 09 Displaying Data
21/34
21
MX2 Training Program –
-
8/19/2019 MX2 Training Program 09 Displaying Data
22/34
22
MX2 Training Program – Displaying Data – $mplitu&e 0-scan Movie
-
8/19/2019 MX2 Training Program 09 Displaying Data
23/34
23
MX2 Training Program – #inear at Degree Position 0-scan *or the linear at ' inspection typical of
corrosion "apping &?ydro*5+M(7 both the
a"plitude and position %scans aredefined by the vertical index axis in ""
&6reen( and the horizontal scan axis in
"" lue(. Birtual probe aperture vs.
probe "ove"ent(
The pixel color is generated by the position
or T5* of the signal in gate A for thatposition on the scan axis. &,ixel G
thic/ness AH )H(
The pri"ary function of the position %
scan is thic/ness readings7 corrosion
analysis and dela"ination sizing.
Scan $@is 'Pro"e movement) A n
& e @ a @ i s ' m m )
P
r o " e : - s c a n
-
8/19/2019 MX2 Training Program 09 Displaying Data
24/34
24
MX2 Training Program – Displaying Data - Position 0-Scan 0olor Palette
4hen the %scan data view is set to thic/ness &,osition %scan( the pixel
color is deter"ined based on the position &T5*( of the signal in the gate.
)n the exa"ple below the depth range for the thic/ness color palette is setfro" 199"" and the color palette is scaled over that range.
A red % in the MX2 indication area indicates that "ore data points than
available pixels exist in the %scan and one pixel "ay represent "any data
points.
%olor palette co"pression ensures that the "ost relevant data point&thinnest or highest a"plitude( is displayed on the %scan and #scan data
views.
? - 6 6 m m
-
8/19/2019 MX2 Training Program 09 Displaying Data
25/34
25
MX2 Training Program – Multi 0-scan #ayouts
The MX2 has single group layouts that allow two %scans to be viewed
si"ultaneously for both a"plitude and position in any co"bination of gate A or #. %scan analysis is covered in detail in the corrosion and co"posite inspection
sections.
-
8/19/2019 MX2 Training Program 09 Displaying Data
26/34
26
MX2 Training Program – Displaying Data – Position 0-scan Movie
-
8/19/2019 MX2 Training Program 09 Displaying Data
27/34
27
MX2 Training Program – Displaying Data - Ray Tracing
The ray tracing data view is a 2Drepresentation of the wedge and weld
corrected for rebounds displaying thebea" path and gate A position for thefirst7 last7 and currently active focallaw or Ascan.
The bea" path for the current focallaw will display a colored circle at the
volu"etric position of the "axi"u"a"plitude signal in gate A.
The ray tracing is pri"arily areporting tool and is dependent onthe operator selecting the correct Ascan and gate position for the
displayed flaw. The nu"ber of selected legs will li"it
the display based on part thic/ness. The ray tracing tool is covered in
detail in the indication table andreporting section.
-
8/19/2019 MX2 Training Program 09 Displaying Data
28/34
28
MX2 Training Program – Displaying Data – Ray Tracing Movie
-
8/19/2019 MX2 Training Program 09 Displaying Data
29/34
29
MX2 Training Program - Displaying Data – Multiple Group Multiple data groups are viewed si"ultaneously by selecting
Display$election6roup DisplayMultiple or by right clic/ing on the title bar and
selecting "ultiple.
+ight clic/ ontitle bar
-
8/19/2019 MX2 Training Program 09 Displaying Data
30/34
30
MX2 Training Program - Displaying Data – Multiple Group cont.
After entering "ultiple group "ode7 options are available for displaying either #
scans fro" the T5*D groups &Mixed( or %scans fro" the phased array groups
&Bolu"e %(.
+ight clic/ on
title bar
+ight clic/ on
title bar
TO5D 'Mi@e&)
0-scan '%olume 0)
-
8/19/2019 MX2 Training Program 09 Displaying Data
31/34
31
MX2 Training Program - Displaying Data – Multiple Group cont.
*ro" "ultiple group "ode7 right clic/ing on the title bar will allow return to single
"ode7 where the single group data views and nor"al view with "enus can be
selected fro" the list.
-
8/19/2019 MX2 Training Program 09 Displaying Data
32/34
32
MX2 Training Program – Displaying Multiple Group P$ Movie
-
8/19/2019 MX2 Training Program 09 Displaying Data
33/34
33
MX2 Training Program – Displaying Multiple Group P$-TO5D Movie
-
8/19/2019 MX2 Training Program 09 Displaying Data
34/34
Free Download Manager.lnk