model 6265 mpro - chandler eng
TRANSCRIPT
Model 6265 MPRO
A Critical Tool for Oil Well Cement Testing
Recent research into the long-term performance of
oilfield cement has made it clear that the cement’s
mechanical properties, not just its compressive
strength, are critical to the long-term integrity of the
well. With a technological breakthrough (US patent
#6941819), Chandler Engineering has developed
the first high-pressure, high-temperature instrument
designed specifically to measure the mechanical properties of oil field
cements.
The Model 6265 Mechanical Properties Analyzer (MPRO) continuously
measures the elastic mechanical properties (Poisson’s ratio, Young’s
modulus, Bulk Modulus) and compressive strength of API cement as it
cures under high-temperature and high-pressure conditions. These
results enable the optimization of the cement’s formulation for
long-term performance.
2001 North Indianwood Avenue, Broken Arrow, OK 74012 • Phone: 918-250-7200 • Fax: 918-459-0165
© 2008, by AMETEK, Inc. All rights reserved. e-mail: [email protected] • www.chandlereng.com
FEATURES
A Proven, Reliable Technique
Ultrasonic cement analyzers (UCA) are widely used to determine
compressive strength during curing. The Model 6265 MPRO is a
unique, specialized UCA that uses proven, proprietary ultrasonic
analysis techniques to perform its measurements. The instrument’s
single vessel curing technique preserves the sample conditions and
testing integrity throughout the test thereby eliminating damage to the
sample from handling or from unrealistic induced stresses caused by
cooling and depressurization.
Real-Time Observation of Mechanical Properties Development
Used To Predict WOC Time
Non-Destructive Method
Uses Proven Industry-Standard Algorithms
✓
✓
✓
✓
MECHANICAL PROPERTIES ANALYZER (MPRO®)
Specifications Measurements Poisson’s Ratio, Young’s Modulus, Bulk Modulus, Compressive Strength Maximum Temperature 400°F / 204°C Maximum Pressure 7,500 psi / 52 MPa
CHANDLER ENGINEERING 2001 North Indianwood Avenue, Broken Arrow, OK 74012 Tel: +1 918-250-7200 Fax: +1 918-459-0165 e-mail:[email protected] www.chandlereng.com
4903 W. Sam Houston Parkway, N., Suite A-400, Houston, TX 77041 Tel: +1 713-466-4900 Fax: +1 713-849-1924
Houston Sales and Service
© 2008, by AMETEK, Inc. All rights reserved. Printed in the U.S.A. XM808PDF (360000)
Operational Simplicity
The various acoustic measurements are read by an internal computer which automatically performs
the numerous complex calculations. All test data including the mechanical property results are then
transferred to a computer which is running Chandler’s Model 5270 Data Acquisition Software.
The software produces real-time graphs of the test parameters and the measured mechanical
properties. These graphs can be printed at any point during testing. All test data is recorded on the
computer’s disk drive as the test progresses so that data is not lost in the event of a power failure.
The Model 5270 software is capable of monitoring multiple Chandler Engineering instruments so only
one computer is needed in the lab thereby saving valuable space.
Utilities Power 220 VAC, ±15%, 50/60 Hz, 0.75 kVA Compressed air 75-125 psi intermittent flow with five gallon (20 liter) reservoir tank Water Clean water 5-150 psi Coolant Clean water or Ethylene glycol solution Drain Suitable for hot water temperatures that may exceed 200°F / 93°C Dimensional Information 6265 MPRO (w x d x h) 18 in. x 17 in. x 16 in. / 46 x 43 x 41 cm—57 lb / 26 kg 6265-I Intensifier 9 in. x 19 in. x 25 in. / 23 x 48 x 64 cm - 118 lb / 54 kg Shipping Information (w x d x h) 36 in. x 36 in. x 49 in. / 91 x 91 x 124 cm—243 lb / 110 kg Manufacturer’s specifications subject to change without notice