mobility & emobility - nuvo group - the total solution

Mobility & eMobility

History

Company founded in 1997. Circontrol believes that innovation, internationalization, quality, and close con-tact with the clients is the most effective way to offer the best products and service.

Activity

Designer and manufacturer of Mobility (Total efficiency on car park solutions) and eMobility (Intelligent rechar-ging solutions for electric vehicles) solutions.

CirCarLife - Catalogue 2014-2015

INDEX

E INtELLIgENt rEChargINg soLutIoNs for ELECtrIC vEhICLEs

E1 INTRODUCTION5

E1.1 CHARGING MODES 5

E1.2 TYPES OF CONNECTORS 6

E2 WAllBOx SMART CHARGING SYSTEM FOR CAR PARkS AND COMMUNAl BlOCkS

7

E2.1 BASIC SERIES 8

E2.2 SMART SERIES 10

E3 POST CHARGING SYSTEM FOR CITY STREETS AND INTER-CITY ROADS

12

E3.1 BASIC CHARGING POSTS 13

E3.2 POST URBAN SMART SERIES 15

E3.3 SMART CHARGING POSTS SERIES 17

E3.4 TWO WHEElS VEHIClE CHARGING SYSTEM 19

E4 MUlTIPOINT SYSTEM 21

E4.1 MASTER CONTROllER 22

E4.2 SlAVE WAllBOx 24

E5 QUICk CHARGING SYSTEM 26

E5.1 QUICk CHARGING ADVANCE SYSTEM 27

E5.2 QUICk CHARGING COMPACT SYSTEM 29

E5.3 QUICk CHARGING COMPACT & COMBO 2 SYSTEM 31

E6 MANAGEMENT AND CONTROl SOFTWARE 33

E7 ACCESSORIES 34

E7.1 SMART STANDAlONE DATA CENTRAlISING UNIT 34

E7.2 COMMUNICATION ACCESSORIES 35

E7.3 PRE-PAYMENT SOlUTIONS 36

E8 TECHNICAl FEATURES 37

uLtra-fast ChargINg

systEm

ELECtrIC vEhICLE ChargINg

IN CIty strEEts

ELECtrIC vEhICLE

ChargINg IN PubLIC Car

Parks (INDoors)

ELECtrIC vEhICLE

ChargINg IN CommuNaL

bLoCks

ELECtrIC vEhICLE

ChargINg IN Car Parks(outDoors)

4

1

CIRCONTROL - CirCarLife

5

.Catalogue 2014-2015

E1 INTRODUCTION

E1.1 CHARgINg mODEsThe EV charging process is regulated by the IEC 61851 and IEC 62196 international standards. These standards define the different charging modes and the type of connection required to charge EVs. All CirCarlife products have been created and designed in compliance with the strictest European regulations and standards, prioritising the end user’s safety. CIRCONTROL is a leading and constantly innovating company committed to developing its products and adapting them to market requirements.

Standard electrical network connector, non-specific for EVs.

Slow AC charging.

The installation must be protected with circuit breakers and earth leaka-ge protection elements.

Maximum 16 A per phase (3.7 kW - 11kW).

Technical features

mode 1

Standard electrical network connector, non-specific for EVs.

Slow AC charging.

The installation must be protected with circuit breakers and earth leaka-ge protection elements.

Maximum 32 A per phase (3.4 kW - 22kW).

Special cable with an intermediate electronic device, with a control and protection pilot function.

Technical features

mode 2

Electrical network connector, specific for EVs.

Slow or semi-fast charging in single or three-phase installations.

Protection elements included in the special infrastructure for EVs.

Maximum 64 A per phase (14.8 kW - 43 kW).

Direct connection of the EV to the charging unit.

Technical features

mode 3

Electrical network connector, specific for EVs.

Quick DC charging.

Charging station, exclusively used for EVs.

Maximum 400 A per phase (50 kW - 150 kW).

Control and protection elements installed in the infrastructure.

Technical features

mode 4

CirCarLifeIntelligent recharging solutions for electric vehicles

1


6


E1.2 TypEs Of CONNECTORs

SAE J1772 Regulation.

5 pins (L1/N, PE, CP, CS).

Maximum 230Vac 32A single-phase (7.3kW).

Indirect connection between the EV and DC supply point. Control and protection elements installed in the infrastructure.

7 pins (L1, L2, L3, N, PE, CP, PP).

Maximum 400Vac 32A three-phase (21kW).

7 pins (L1, L2, L3, N, PE, CP, PP).

Maximum 400Vac 63A three-phase (43kW).

Type 1

Type 2

Type 3

CHAdemO

DC connector of the combined AC/DC plug-in charging system:The inlet of the plug-in connector can also be used for AC voltage charging with a type 2 AC plug. One inlet is required on the vehicle side for AC and DC charging.

Combined Charging system Combo 2

1


26


5


E5. Quick charging systEm

CIRCONTROL’s ultra-fast charging stations offer the fastest way to recharge the current electric vehicles used. the innovative construc- tion design offers a quick charging solution that is easy to use and complies with the current standards (CHAdeMO, Combo...) for fast electric vehicle charging with direct current. ease of installation and electrical protection to increase user safety are other major factors of consideration in the system design.

Integrated communications in this device enable permanent connection with a remote control station, which monitors the device charging data in real time and activates the device remotely, meaning it can be simply and fully exploited.

Integrated dispen-ser power unit Communication CHAdeMO Socket Combo Socket

advancE - -

compact -

compact & comBo 2

advancE compact compact & comBo 2

Description



31

5

Description

Circontrol CCQC (Compact combined quick charged) combine CHAdeMO (DC 50kW), Combo 2 (DC 50kW) and AC 43kW.

Designed to support dual protocol CHAdeMO and CCS (com-bo 2) to cover all users needs, making suitable for business and commercial fleets as well as petrol station along the roads.

The Compact Combined version has been adapted with latest communica-tion protocols OCPP and XML. Circontrol offers an innovative scada software for remote control and as a management tool.

Charging operator can friendly access to status information, graphics and charge reports according historical data registered.

E5.3 Quick charging compact & comBo 2

Remote control and monitoring of the unit through standard XML & HTML

OCPP protocol integration

Ethernet 10/100BaseTX communication and 3G (Optional)

Technical features

Quick Charging in 15 minutes

8” LCD screen for user interaction

Start, Stop and emergency buttons

Light indications for status

RFID identification and prepayment

Mode 3 and mode 4 locking mechanism

Real time energy metering

Time and consumption based prepayment modes

Simultaneous AC & DC charging with maximum demand control

IP Rate: IP54

Temperature range -30ºC to +45ºC

Protection against overloads, short-circuits and insulation faults with an automatic switch

EV standards: IEC 62196-3, IEC 61851-1, CHAdeMO and CCS (combo 2)

User interface

Charging management

Communications and protocols

security & protection


32


5

Type Ref V in f Hz I in p in V out I outConnector

typeCharging

mode

Technicalfeatures

page

Input Output

COMBO2 (CCS)

CCL-QPC-CCS

400VAC50/60Hz +/- 5%

80 A 58 kVA 500V 120ADC JEVS G105 Mode 4 79

CCl-QPC-CH-CCS

400VAC50/60Hz +/- 5%

80 A 58 kVA 500VDC

120ADC(Connector 1)

JEVS G105(Connector 1)

Mode 4(Connector 1)

80

120 ADC(Connector 2)

Type 2 COMBO(Connector 2)

Mode 3(Connector 2)

CCL-QPC-CH-CCS-AC63

400VAC50/60Hz +/- 5%

143 A 103 kVA

500 VDC(Connector 1)

120ADC(Connector 1)

JEVS G105(Connector 1)

Mode 4(Connector 1)

81

500VDC(Connector 2)

120ADC(Connector 2)

Type 2 COMBO(Connector 2)

Mode 4(Connector 2)

400 VAC(Connector 3)

63A(Connector 3)

Type 2(Connector 3)

Mode 3(Connector 3)

Technical features

8

E8. Technical features


37



79

8

Quick Charge Combo CCL-QpC-CCs

Type CCL-QpC-CCs

Code 490146

AC Input

AC power supply 3P + N + PE

AC Voltage 400V AC +/- 5%

Nominal input current 80 A (software limit control)

Required power supply capacity 58 kVA

Power Factor >0,96

Efficiency 95 % at nominal output power

Frequency 50 / 60 Hz

DC Output

Maximum output current 120 A

Maximum output power 50 kW

Output voltage range 50 - 500 VDC

Charge system

DC charge Mode 4 (IEC-61851-23/24)

Type Combo-2(DIN 70121)

Electrical protections

Overcurrent protections MCB

Safety protection RCD 30mA autoreco-very (class A)

Network connection

Ethernet 10/100BaseTX (TCP-IP)

General

Compliance CE / Combo-2 (DIN 70121) EN61851-23

Enclosure rating IP54 / IK10

Enclosure material Zinced steel

Operating temperature -10 ° to + 45 °C (Hea-ter system included)

Ambient temperature storage -20 to +60Cº

Operating humidity 30 to 90 % RH Non-condensing

RFID system ISO / IEC14443A / B

Display 8" HMI

Power limit control DC by software

DC Cable lenght 3 meters

Lights for status indication RGB colors indicator

Interface protocol OCCP / XML

Dimensions (D x W x H) 780mm x 650mm x 2060mm

Weight 440kg

Isulating system High frequency trans-former isolation

Cooling system Air Cooling fans

Optional devices

Wireless Comunication 3G/GPRS/GSM

Armonic Filter <13% THD

MiD certified AC meter Active Energy Class B, Reactive Energy Class 2.0

Low temp. option -30 to + 45 °C


80


8

Quick Charge Combo CCL-QpC-CH-CCs

Type CCL-QpC-CH-CCs

Code 490147

Number of plugs 2

AC Input





Power Factor >0,96



DC Output




Charge system

DC Charge 1 Mode 4 (IEC-61851-23/24)

Combo-2 (DIN 70121)

DC Charge 2 Mode 4 (IEC-61851-23/24)

JEVS G105 (IEC-92196-3)



Safety protection RCD 30mA autorecovery (class A)

Network connection


General

Compliance CE / Combo-2 (DIN 70121) EN61851-23

CHAdeMO rev.0.9 certified



Operating temperature -10 ° to + 45 °C (Heater system included)




Display 8" HMI

Power limit control DC by software

DC Cable lenght 3 meters




Weight 440kg

Isulating system High frequency transfor-mer isolation


Optional devices



MiD certified AC meter Active Energy Class B, Reactive Energy Class 2.0




81

8

Quick Charge Combo CCL-QpC-CH-CCs-AC63

Type CCL-QpC-CH-CCs-AC63

Code 490148

Number of plugs 3

AC Input





Power Factor >0,96



DC Output




AC Output



Output voltage range 400V AC 3P + N + PE

Charge system

DC Charge 1 Mode 4 (IEC-61851-23/24)Combo-2 (DIN 70121)

DC Charge 2 Mode 4 (IEC-61851-23/24)JEVS G105 (IEC-92196-3)

AC charge Mode3 (IEC61851-1) Type 2 (IEC6296) tethered cable



Safety protection RCD 30mA autorecovery (class A)

Network connection


General

Compliance CE / Combo-2 (DIN 70121) EN61851-23CHAdeMO rev.0.9 certified



Operating temperature -10 ° to + 45 °C (Heater system included)




Display 8" HMI

Power limit control AC & DC by software

DC cable lenght 3 meters

AC cable lenght 5 meters




Weight 445 Kg

Isulating system High frequency transfor-mer isolation


Optional devices



MiD certified AC meter Active Energy Class B Reactive Energy Class 2.0


Nº 6002038

Circontrol has a network of distributors and representative agents all over the world, for further information contact with:

CIrCoNtroL s.a. (Headquarter)C/ Innovació, 3 - Industrial park CAN MITJANS08232 – VILADECAVALLS (Barcelona)Spain

Tel.: +34 937 362 940Fax.: +34 937 362 941

[email protected]

mobility & emobility - nuvo group - the total solution

Documents