mobil lubeguard contamination control solutions lubeguard contamination control solutions ......
TRANSCRIPT
Mobil LubeGuard ContaminationControl Solutions
It pays to be proactive.™
It takes more than qualitylubricants for optimal performance.
Mobil LubeGuard contaminationcontrol products help maximize reliability. Setting the standard for lubrication excellence, ExxonMobilis pleased to offer the Mobil LubeGuard line of lubricantreservoir breather filters and fluid handling equipment. MobilLubeGuard contamination control products can prohibit theingression of harmful contaminants through the breathervents as well as provide protection during the fluid transferprocess, providing lubricants with the protection they need.
Ingression of moisture and particulates can occur duringsystem operation and fluid maintenance. Protect yourinvestment in high performance lubricants by using theMobil LubeGuard contamination control products.
Take the proactive step by specifying MobilLubeGuard contamination control products.
Mobil LubeGuard contamination control products can providethe following benefits:
■ Protect expensive equipment, lubricants, and in-line process filters.
■ Maximize lubricant performance.
■ Lower operating costs.
FeaturesFoam Pad
Patented Polyester Filter
Silica Gel/ Desiccant
Air Intake Plug Ring
Different Sizes
Foam Pad
Microglass Media
Silica Gel/ Desiccant
Optional Flapper Valve Adaptor
Metal Housing
Color Indicators
Foam Pad
Patented Polyester Filter
Silica Gel/ Desiccant
Expansion Chamber
Dual Check Valve
Pleated Filter Element
Hydrophobic Media
Oil Coalescing Media(MOB-SB-35 only)
Vacuum Indicator(optional)
Mobil LubeGuard Disposable Breather OverviewBenefitsDisperses air evenly over filter media and silica gel
Captures particles as small as 0.5 micron (73.5% efficiency),3-micron absolute/β3 >200
Removes moisture from incoming air, extending fluid and system life
Allows for easy activation of the unit without tools and controlled breathing
Allows for adaptation to virtually any system
Disperses air evenly over filter media and silica gel
Captures particles as small as 0.5 micron (73.5% efficiency),1-micron absolute/β1 >200
Removes water from incoming air,extending fluid and system life
Optimizes breather longevity
Rugged casing
For easy system monitoring
Stops oil mist during exhalation.Disperses air evenly over filter media and silica gel
Captures particles as small as 0.5 micron (73.5% efficiency),3-micron absolute/β3 >200
Removes moisture from incoming air,extending fluid and system life
Creates a nearly sealed system
Provides a slight system pressurization,protects system integrity
Large surface area, blocks particles assmall as -micron (99.5% efficiency),/β1>200
Repels free water, yet permits humid airto escape
Drains oil back to system, prevents contamination of work environment
Actuates when maximum restriction isreached, protects system integrity
EnvironmentIntermittent operations
Gearboxes
Hydraulic reservoirs
Transformers
Storage tanks
Totes
Harsh environments
High temperature
Mobile equipment
Nautical applications
Thermal expansion / contraction only
High humidity
Gearboxes and other lowflow applications
Pumps
Bearing houses
Storage drums, TotesWashdown applications
Closed loop systems
Low humidity applications
Continuous operations withfrequent washdowns
Applications that create oil'misting'
Arid, high dustenvironments
MOB-BBMOB-1MOB-2MOB-3MOB-4MOB-OC2
MOB/DS-6
MOB-P4RMOB-P8MOB-P-1XMOB-P4
MOB-SB-25MOB-SB-35
Disposable Desiccant Breathers
■ Resilient polycarbonate plastic body
■ Bi-directional, controlled airflow
■ Multi-tiered filtration process
■ Water vapor adsorbent
■ Impact resilient
■ Color indicator for easy system monitoring
■ U.V. light inhibitive
Miniature Disposable Breathers
■ Diminuitive design aids installation in confined areas
■ Oil coalescing breather captures oil mist, protects environment
Mobil LubeGuard Disposable StandardDesiccant Breather
STANDARD DISPOSABLE BREATHERS
Model # MOB-2 MOB-3 MOB-4
Unit Size (height, in.) 4.5 6.5 8.5
Unit Diameter (in.) 4 4 4
Filtration Area (square in.) 11.2 11.2 11.2
Amount of Silica Gel (lbs.) 1 1.5 2
Adsorption Capacity (cups) .7 1 1.5
Max. Flow Rate (cfm @1 PSID) 16 16 16
Filtration (µ absolute) 3 3 3
Op. Temp. Range (˚F) -58 to 212 -58 to 212 -58 to 212
Hydrophilic Agent Silica Gel Silica Gel Silica Gel
Filter Media Polyester Polyester Polyester
Connection Size (NPT) 1" 1" 1"
MINIATURE DISPOSABLE BREATHERS Model # MOB-BB MOB-1 MOB-OC2
Unit Size (height, in.) 3 5 2.5
Unit Diameter (in.) 2.75 2.75 2.625
Filtration Area (square in.) 4.12 4.12 3.1
Amount of Silica Gel (oz.) 2 4 x
Adsorption Capacity (fl.oz.) .4 .8 n/a
Max. Flow Rate (cfm @1 PSID) 3 3 7
Filtration (µ absolute) 3 3 3
Op. Temp. Range (˚F) -20 to 200 -20 to 200 -20 to 200
Hydrophilic Agent Silica Gel Silica Gel n/a
Filter Media Polyester Polyester Fiberglass
Connection Size (NPT) 3/8" 3/8" 3/8"
MOB-2 MOB-3 MOB-4
MOB-BB
Please see page 8 for available threaded adaptors
Disposable Steel Breather
■ Rugged housing ideal for harsh environments, high temperature, mobile and nautical applications
■ Color indicator window for easy system monitoring
■ Bi-directional, controlled airflow
■ Multi-tiered filtration process
■ Water vapor adsorbent
■ Resilient construction
■ 1-micron absolute media
Mobil LubeGuard DisposableSteel Breathers
DISPOSABLE STEEL BREATHER
Model # MOB/DS-6
Unit Size (height, in.) 6.5
Unit Diameter (in.) 5
Filtration area (square in.) 38
Amount of silica gel (oz.) 24
Adsorption capacity (fl. oz.) 9
Max. flow rate (cfm @1.5 PSID) 20
Filtration (micron) 1 µ
Operating temperature range (˚F) -20 to +250
Hydrophilic agent Indicating silica gel
Filter media Microglass
Connection size Varies depending on adaptor
Adaptor required, please choose from various size options.
MOB/DS-6 with recommended, optionalFlapper Valve adapter MOB-DSV5
Disposable Hybrid Breathers
■ Hybrid technology breather for low-flow applications (i.e. gearboxes and pumps)
■ Ideal for washdowns and high humidity areas
■ Desiccant, particulate filtration ensures incoming air is clean and dry
■ Membrane technology isolates lubes from extreme ambiant humidity
■ Check valves ensure no excess pressure/vacuum builds
Mobil LubeGuard ProDisposable Hybrid Breathers
HYBRID PUMP BREATHERS Model # MOB-P-1X MOB-P4
Unit Height (in.) 5
Unit Diameter (in.) 2.75 3.5
Filtration Area (square in.) 4.12 4.12
Amount of Silica Gel (oz.) 4.8 4.8
Adsorption Capacity (fl oz.) .8 .8
Max. Flow Rate (cfm @1.5 PSID) 1 1
Filtration (µ absolute) 3 3
Op. Temp. Range (˚F) -20 to 200 -20 to 200
Hydrophilic Agent Silica Gel Silica Gel
Filter Media Polyester PolyesterConnection Size (NPT) 3/8" 3/8"
8
HYBRID DISPOSABLE BREATHER
Model # Unit Size Filtration Amount Adsorption Max. Flow Rate Filtration Op. Temp Hydrophilic Filter Connection(h x dia., in.) Area (sq.in.) Silica Gel (lbs.) Capacity (cups) (cfm@1 PSID) (µ absolute) Range (˚F ) Agent Media Size
(slip-fit design)
MOB-P8 8 x 5 11.2 .9 1 Thermal Expansion/ 3 -20 to 200 Silica Gel Polyester 1"Contraction Only
MOB-P4R MOB-P8 MOB-P-1X MOB-P4
These breathers are
designed to filter out
particles and block water in
its liquid state from entering
fluid containing reservoirs.
Contamination Control Breathers
■ Creates an impenetrable barrier against water droplets
■ Pleated element provides a large surface area and is 99.5% efficient in blocking 1 micron and larger/ β1>200 particles
■ Coalesces oil mist, preventing contamination of working environment (MOB-SB-35 only)
■ Optional visual vacuum indicator actuates when maximum restriction has been reached
■ Rugged ABS plastic housing
■ Easy installation requires hand tighten only
Mobil LubeGuard Pro Non-Desiccant SpecialtyBreathers
MOB-SB-25 with vacuum indicator and MOB-SB-35
CONTAMINATION CONTROL BREATHERS
Model # Unit Size Filtration Amount Max. Flow Rate Filtration Op. Temp Hydrophilic Filter Connection(h x dia., in.) Area (sq.in.) Silica Gel (µ absolute) Range (˚F) Agent Media Size (NPT)
MOB-SB-25 5 x 5 180 n/a 40 cfm @ 1 psid 1 -20 to 200 n/a Polyester 1"
MOB-SB-35 5 x 5 180 n/a 40 cfm @ 1 psid 1 -20 to 200 n/a Polyester 1"
Mobil LubeGuard andMobil LubeGuard ProDisposable BreatherAccessoriesMobil LubeGuard provides a wide range of disposablebreather accessories for easy adaption to your specificapplications and working environment.
DISPOSABLE UNIT ADAPTERS (USE WITH MOB-2
MOB-3, MOB-4, MOB-HG-8, MOB-OC8, MOB-VG1,
MOB-VG-4, MOB-DS6)
Model # Description
MOB-10 1" Threaded Adaptor
MOB-17 1" - 3/4" Threaded Reducer
MOB-18 1" - 1/4" Brass Threaded Reducer/Adapter
MOB-11 Hose Clamps
MOB-12 Field Adaptor
MOB-15 Flange Adaptor
MOB-16 Flex Hose
MOB-ME-2 '2' Breather Manifold
MOB-ME-3 '3' Breather Manifold
MOB-ME-4 '4' Breather Manifold
MOB-HMOB Heavy Duty Clamps for MOB-2, 3, or 4
MOB-13 1" Slip Fit to 1" Female Threaded Adapter
MOB-13-PI 1" Slip Fit to 1" Female Threaded Adapter with
Single Position Vacuum Indicator
MOB-PI 1/8" Single Position Vacuum Indicator
MOB-35 3/4" - 3/8" SCH, 40 PVC Reducer Bushing
MOB-36 1" - 3/8" SCH, 80 PVC Reducer Bushing
MOB-37 1/2" - 3/8". 40 PVC Reducer Bushing
MOB-OCM-3 Oil Coalescing Adapter for MOB-2, MOB-3, MOB-4
MOB-DSA10 1" Threaded Adaptor for Disposable Steel MOB-DS-6
MOB-DSA-17 3/4” Threaded Adaptor for Disposable Steel MOB-DS-6
MOB-DSV5 1" Threaded Flapper Valve Adaptor for Disposable Steel
DISPOSA BLE UNIT A DAPTORS FOR USE WITHNEW POLYCARBONATE MOB-2 MOB-3, MOB-4Model # DescriptionMOB-12T New 1" NPT Female Threaded Field Adaptor MOB-15T New 1" NPT Female Threaded Brass Flange AdaptorMOB-17T New 1" NPT Female -3/4" NPT Male Adaptor
UNIT
UNIT
ADAPTOR12-T
UNIT
ADAPTOR15-T
ADAPTOR17-T
Mounting AdaptersBreathers are easily installed using
one of several adapter options.
Pressure IndicatorAdapterSingle position indicator measuresair induction system filter restriction.
Flex Hose,Hose ClampsFlex hose and hose clampsare available to aid in remotemounting of breathers.
Carbon or Stainless Steel Breather
■ Rugged steel housing ideal for very high temperatures, extremely dirty air, or corrosive environments
■ Accommodates large airflow rates with minimal pressure drops and high-volume systems (ie. bulk storage tanks)
■ Bi-directional airflow
■ Multi-tiered filtration process
■ Water vapor adsorbent
■ Large surface area results in long service life
■ Sight glass indicator for easy system monitoring
■ Rebuildable
Mobil LubeGuardBreathers for High FlowRate, High Volume andHarsh Environments
CARBON STEEL BREATHERS
Model Number MOB/CS-4 MOB/CS-6 MOB/CS-10 MOB/CS-20 MOB/CS-30 MOB/CS-40
Size (height x dia., in.) 10 x 7.2 12 x 9.11 8 x 12.6 27 x 12.6 36 x 12.6 35 x 18
Filtration Area (square in.) 8.35 427 1,049 1,049 1,049 1224
Amount of Silica Gel (lbs.) 1.8 4.2 17 34 51 92
Adsorption Capacity (cups) 1.3 3.1 12.4 24.8 37.2 67.1
Max. Flow Rate (cfm) 35 @ 1 PSID 105 @ 1 PSID 120 @ .5 PSID 120 @ .5 PSID 120 @ .5 PSID 270 @ 1 PSID
Filtration (µ absolute) 1 1 1 1 1 4
Op.Temp. Range (°F) -20 to 250 -20 to 250 -20 to 250 -20 to 250 -20 to 250 -20 to 250
Hydrophilic Agent Silica Gel Silica Gel Silica Gel Silica Gel Silica Gel Silica Gel
Connection Size (NPT) 1" 2" 3" 3" 3" 4-6"
STAINLESS STEEL BREATHERS
Model Number MOB/SS-4 MOB/SS-6 MOB/SS-10 MOB/SS-20 MOB/SS-30 MOB/SS-40
Size (height x dia., in.) 10 x 7.2 12 x 9.1 18 x 12.6 27 x 12.6 36 x 12.6 35 x 18
Filtration Area (square in.) 8.35 427 1,049 1,049 1,049 1224
Amount of Silica Gel (lbs.) 1.8 4.2 17 34 51 92
Adsorption Capacity (cups) 1.3 3.1 12.4 24.8 37.2 67.1
Max. Flow Rate (cfm) 35 @ 1 PSID 105 @ 1 PSID 120 @ .5 PSID 120 @ .5 PSID 120 @ .5 PSID 270 @ 1 PSID
Filtration (µ absolute) 1 1 1 1 1 4
Op.Temp. Range (°F) -20 to 250 -20 to 250 -20 to 250 -20 to 250 -20 to 250 -20 to 250
Hydrophilic Agent Silica Gel Silica Gel Silica Gel Silica Gel Silica Gel Silica Gel
Connection Size (NPT) 1" 2" 3" 3" 3" 4-6"
MOB/CS-20 MOB/CS-6 MOB/CS-30 MOB/CS-4 MOB/CS-10(not shown MOB/CS-40)
Steel Unit AdaptorsThere are several steel unitadaptors available to meetyour needs.
Mobil LubeGuardBreathers that Protectthe Working Environment
MOB/OCD-14
Oil Coalescing Steel Breathers
■ Rugged steel housing ideal for harsh environments, extreme dirt and high temperatures
■ Ideal for injection molding, stamping applications
■ Captures and recycles oil back into system
■ Prevents contamination of the working environment
CARBON STEEL OIL COALESCING BREATHERSModel # Unit Size Filtration Amount Adsorption Max. Flow Rate Filtration Op. Temp Hydrophilic Filter Connection
(h x dia., in.) Area (sq.in.) Silica Gel (lbs.) Capacity (cups) (cfm@1 PSID) (µ absolute) Range (ºF) Agent Media Size (NPT)
MOB/CS-10-OC 8 x 5 15 17 9.5 170 1 -20 to 200 Silica Gel Microglass 3"
MOB/OCD-14 8 x 12.6 1224 23 9.5 170 4 -20 to 250 Silica Gel Polyester 4-6"
STEEL UNIT ADAPTERS AND REPLACEMENT COMPONENTS
Model # Description
MOB-13-4C Steel Adaptor for MOB/CS-4
MOB-13-4C-SS Stainless Steel Adapter for MOB/SS-4
MOB-13-6C Steel Adaptor for MOB/CS-6
MOB-13-6C-SS Stainless Steel Adaptor for MOB/SS-6
MOB-13-10C Steel Adaptor for MOB/CS-10
MOB-13-10C-SS Stainless Steel Adaptor for MOB/SS-10
MOB-4D Desiccant Bag Filter for MOB/CS-4 or MOB/SS-4
MOB-6D Desiccant Bag Filter for MOB/CS-6 or MOB/SS-6
MOB-10D Desiccant Bag Filter for MOB/CS-10, MOB/SS-10, MOB/CS-20,
MOB/SS-20, MOB/CS-30, or MOB/SS-30
MOB-4F/1 Pleated Filter Element for MOB/CS-4 or MOB/SS-4
MOB-6F/1 Pleated Filter Element for MOB/CS-6 or MOB/SS-6
MOB-10F/1 Pleated Filter Element for MOB/CS-10 or MOB/SS-10, 20 or 30
MOB-14D Desiccant Bag Filter for MOB/OCD-14, CS-40, or SS-40
MOB-14F/1 Pleated Filter Element for MOB/CS-40
ReplacementFilter ElementThe pleated filterelement is one componentof the steel rebuild kit.
Mobil LubeGuard™ filter carts offer completecustomization. Mobil fluid handling systems incorporate smart technology to make fluid handling asimple task, requiring less equipment and labor while reducing system contamination.
Off-line filtration units effectively filter fluids used in hydraulic and lube oil systems. Byremoving dirt and moisture, your equipment and lubricants can run longer and harder.
Our Mobil LubeGuard™ filter carts offer complete customization. The followingspecifications are basic highlights of all possible combinations of the filter carts.
Filter cart features & benefits:
■ Heavy duty cart with oil catch pan
■ Industrial powder coated paint
■ Pneumatic wheels
■ Two filters provide two-stage filtration
■ 12’ long hose assemblies
■ Clear PVC with steel wire reinforced hoses
■ Easy-to-read filter gauges indicate filter condition
■ Automatic filter bypass set at 25 PSID
■ Quick Couplers eliminate messy leaks
Pump and Motor Specifications:
■ Various flow capacities to filter various hydraulic and gear lubricants
■ 1 – 1.5 HP, 110/220 VAC, 1 phase, 60 Hz, TEFC motor with overload switch
■ Standard 25’ electric cord
■ Continuous flow air driven pumps
Basic Specifications:
Height: 46”
Width: 22”
Weight: Unit weight 140 lbs. (Shipping weight is approximately 180 lbs. Weight willvary with model options.)
Filter Options:
• High capacity spin-on filters available in 3, 6, 12, 25 micron at βx>200
• Water absorbing element also available
Options:
• Pump safety relief valve set at 65 PSID • Filter bypass for fluid transfer only
• 25’ electric cord reel • Sample ports in two locations
• Various hose end connections • Customizable colors
Mobil LubeGuard Filter Carts
It pays to be proactive.™
PUMP [Box 1]
Code Description
02E 2 gpm / 1 hp electric (for ISO 68 / 325 SUS* and above) /110 VAC
05E 5 gpm / 1 hp electric (for viscosity below ISO 68 / 325 SUS) / 110 VAC
10E 10 gpm / 1 hp electric (for viscosity below ISO 68 / 325 SUS) / 110 VAC
20E 20 gpm / 1.5 hp electric (for viscosity below ISO 68 / 325 SUS) / 110 VAC
02F 2 gpm / 1 hp electric (for ISO 68 / 325 SUS* and above)/ 220 VAC
05F 5 gpm / 1 hp electric (for viscosity below ISO 68 / 325 SUS) / 220 VAC
10F 10 gpm / 1 hp electric (for viscosity below ISO 68 / 325 SUS) / 220 VAC
20F 20 gpm / 1.5 hp electric (for viscosity below ISO 68 / 325 SUS) / 220 VAC
02A 2 gpm / .95 hp Air (for ISO 68 / 325 SUS* and above)
08A 8 gpm / .95 hp Air (for viscosity below ISO 68 / 325 SUS)
M
[Box 1] [Box 2] [Box 3] [Box 4] [Box 5] [Box 6] [Box 7] [Box 8] [Box 9] [Box 10] [Box 11] [Box 12]
DRAIN CONNECTOR /SUCTION SIDE * [Box 2]
Code Description
F Flush Face Connector
A ISO A Connector
B ISO B Connector
W Wand Connector
N Threaded End*= All are coupler ends (female)
DRAIN CONNECTOR / HOSE SIZE [Box 3]
Code Description
3† 1/2 inch
5 3/4 inch
7 1 inch
†=not for 20 gpm
FILL CONNECTOR / PRESSURE SIDE * [Box 4]
Code Description
F Flush Face Connector
A ISO A Connector
B ISO B Connector
W Wand Connector
N Threaded End
*= All are coupler ends (female)
FILTER A [Box 6]
Code Description
A 3-micron particulate Filter
B 6-micron particulate Filter
C 12-micron particulate Filter
D 25-micron particulate Filter
J Water Filter
FILTER BYPASS [Box 8]
Code Description
0 No Bypass
1 Filter Bypass
SAMPLE PORTS [Box 9]
Code Description
0 No Sample Ports
1 Sample Ports
SAMPLE PORTS [Box 9]
Code Description
0 No Sample Ports
1 Sample Ports
SAMPLE PORTS [Box 9]
Code Description
0 No Relief Valve
1 Relief Valve
RELIEF VALVE* [Box 11]
Code Description
0
1
ELECTRIC CORD [Box 10]
Code Description
1 25 foot Cord
2 25 foot Cord Reel (not available for 20gpm/1.5hp pump)
FILTER B [Box 7]
Code Description
A 3-micron particulate Filter
B 6-micron particulate Filter
C 12-micron particulate Filter
D 25-micron particulate Filter
J Water Filter
* = SUS @ 100˚F
FILL CONNECTOR / HOSE SIZE [Box 5]
Code Description
3† 1/2 inch
5 3/4 inch
7 1 inch
†=not for 20 gpm
4
Visit www.des-case.com/mobillubeGuard to specify your cart with our interactive, user-friendly code and cart customizer.
How to order Mobil LubeGuard Filter Cart Series:Select the desired symbol (in the correct position) to construct a model code or go to the above web address for fast, helpful service. Then contact your local distributor or call Mobil if you don't see the options you need or would like additional assistance.
ExxonMobil FluidHandling SupportHotline: (866) 662-4554.
FILL TUBE
VACUUM INDICATOR
BREATHER PORT
DRAIN CONNECTOR
FILL CONNECTOR
HYDRAULIC ADAPTER
BUNA-N GASKET
OPTIONAL SAMPLE PORT NOT SHOWN
FILL TUBE
DRAIN TUBE
ADAPTORFILL CONNECTOR
DRAIN CONNECTOR
Mobil LubeGuard™ Adaptor Kit Series reducesystem contamination. Make fluid handling a simple task, requiring less equipment and labor while reducing system contamination.
Off-line filtration units effectively filter fluids used in hydraulic and lube oil systems. By removing dirt and moisture, your equipment and lubricants can run longer and harder.
Our Mobil LubeGuard™ Adaptor Kit Series offer complete customization. The following specifications are basic highlights of all possible combinations of theAdaptor Kit Series.
Adaptor Kit Series Features & Benefits:
■ Our replaceable breathers are used to prohibit the entry of particulatecontamination.
■ Single position vacuum indicator actuates when maximum filter restriction hasbeen reached and is included in all Hydraulic Adaptor Kits.
■ Desiccant changes colors indicating replacement is needed, when maximummoisture adsorption is reached.
■ Sample port is available with sample tubes of any length.
■ 6-bolt hole mounting for the Hydraulic Kit.
Filter Options:
■ Mobil LubeGuard disposable dessicant breathers are manufactured in three main sizes, MOB-2, MOB-3, and MOB-4 to accommodate different mountingspace requirements.
■ The pleated element of the MOB-SB-25 and MOB-SB-35 provides a largesurface area and is 99.5% efficient in blocking particles 1µ and larger.
Mobil LubeGuard Adaptor Kit Series
It pays to be proactive.™
DRUM ADAPTER
HYDRAULIC ADAPTERHYDRAULIC ADAPTER
ADAPTOR TYPE [Box 1]
Code Description
H Hydraulic Adaptor
D Drum Adaptor
M
[Box 1] [Box 2] [Box 3] [Box 4] [Box 5] [Box 6] [Box 7] [Box 8] [Box 9]
DRAIN CONNECTOR /SUCTION SIDE * [Box 2]
Code Description
F Flush Face Connector
A ISO A Connector
B ISO B Connector*= All are plug ends (male)
DRAIN CONNECTOR / HOSE SIZE [Box 3]
Code Description
3† 1/2 inch
5 3/4 inch
7 1 inch†=not for 20 gpm
FILL CONNECTOR / PRESSURE SIDE * [Box 4]
Code Description
F Flush Face Connector
A ISO A Connector
B ISO B Connector
*= All are plug ends (male)
SAMPLE PORT [Box 7]**
Code Description
0 No Sample Port
1 Sample Port**= Enter 0 for the Drum Adaptor.
FILL CONNECTOR / HOSE SIZE [Box 5]
Code Description
3† 1/2 inch
5 3/4 inch
7 1 inch†=not for 20 gpm
FILL TUBE LENGTH (INCHES)** [Box 6]
Code Description
Enter 2 digits for your prefered length**= For example, enter 08 for 8 inches long**= The recommended length for a drum adaptor is 6 inches
DRAIN OR SAMPLE TUBE LENGTH [Box 8]**
Code Description
Enter 2 digits for your prefered length*†
*= For example, enter 08 for 8 inches long**= This is either the Drain Tube for the Drum Adaptor or the Sample Tube for the Hydraulic Adaptor, not both. †= The recommended length for a drain tube on a 55-gallon drum is 35 inches.
BREATHER FILTER [Box 9] *
Code Description
2 3-micron particulate desiccant breather [MOB-2]
3 3-micron particulate desiccant breather [MOB-3]
4 3-micron particulate desiccant breather [MOB-4]
25 1-micron particulate non-desiccant breather [MOB-SB-25]
35 1-micron particulate non-desiccant, oil-coalescing breather [MOB-SB-35]
*= For breather replacement, use bracketed number.
How to order Mobil LubeGuard Adaptor Kit Series Series:Select the desired symbol (in the correct position) to construct a model code. Then contact your local distributor or callExxonMobil if you don't see the options you need or would like additional assistance.
ExxonMobil FluidHandling SupportHotline: (866) 662-4554.
ExxonMobil Lubricants &Specialties Company
3225 Gallows RoadFairfax, Virginia 22037
Mobil LubeGuard Contamination ControlProduct SupportHotline: (866) 662- 5554Mobil Technical Call Center:(800) 662- 4525
© 2006 ExxonMobil Corporation
® The Mobil and ExxonMobil logotypesand the Pegasus design are registeredtrademarks of the ExxonMobil Corporation orone of its subsidiaries.
™ Mobil LubeGuard, Mobil LubeguardPro,and the ‘It pays to be proactive’ tagline aretrademarks of ExxonMobil Corporationor one of its subsidiaries.
Breathers should be disposed of as any oilfilter, as a small amount of oil is collected inservice. Please consult your local and stateregulations and dispose of accordingly.
MSDS available upon request.
www.mobil.com
Prin
ted
in (
US
A) T
PM
OB
BR
0902