manually operated groundnut shelling machine
TRANSCRIPT
-
8/10/2019 Manually Operated Groundnut Shelling Machine
1/6
Manually operated
Groundnut Sheller machine
Introduction
Groundnut is a valuable and important crop which is cultivated almost
throughout the world. The groundnut must be cracked to obtain peanuts so it
can be further used for extraction of oil, and used in food items. The traditional
way of removing peanut from groundnut is to crack it with hand but when a
large amount of nuts have to be work on this method is of time consuming so
the first Sheller made was revolving stone Sheller which had many
disadvantages so a rubber tier Sheller was made
Rubbing action, between a rubber tire and a wire mesh, was used as the shelling
principle, for the Rubber Tire groundnut Sheller. The prototype consists mainly
of a main frame, a rubber tire, a concave, and a hopper. The rubber tire usedwas a worn out rubber tire to avoid slip during operation.
-
8/10/2019 Manually Operated Groundnut Shelling Machine
2/6
Need for Project :-
In our country due to heavy cultivation of
groundnut there is a need of shelling the groundnuts and obtaining the peanuts
in safe, fast and economic form. The agricultural industries in our country have
heavy machines to do the same but the farmers in rural areas and in small
industries its necessary to have a economical and high efficiency machine
which can easily break the groundnut shell without any electrical supply
needed.
Big commercial systems are simply too expensive for our target market. Electric
powered machines are impractical because electricity is expensive and hard to
find in rural areas. Our solution is small and inexpensive; it fits well into the
household peanut industry. The Malian peanut sheller(Universal Nut sheller) is
also a good low cost alternative, but it requires the builder to have molds tomake the concrete components. If the builder has access to fibreglass materials
to make molds out of, it is easy for him to build the device. If he does not have
access to such technologies, he must contact the designers and buy the molds at
through the United States, which may be very expensive.
-
8/10/2019 Manually Operated Groundnut Shelling Machine
3/6
Working Principle :-
The peanut sheller is made of a used rubber tire mounted
in a metal housing with a concave wire screen bottom. As the wheel is cranked,
the nuts enter the space between the tire and the screen.
In operation, groundnut in the hopper is fed into the clearance between the
rubber tire and the concave while the rubber tire is turning. The groundnut is
then shelled by rubbing action between the rubber tire and the wire mesh. Afterthe groundnut has been shelled, the kernel and the shell fall through the wire
mesh into a collecting pan. Separation of the shell from the kernel has to be
done separately.
-
8/10/2019 Manually Operated Groundnut Shelling Machine
4/6
Design:-
-
8/10/2019 Manually Operated Groundnut Shelling Machine
5/6
The main components of manually operated groundnut sheller
machine :-
1. Main frame
2. Rubber tyre frame
3. Rubber tyre
4. Concave
5. Cover
6. Hopper
7. Trough
8. Bearing
Advantages, Disadvantages & Applications :-
ADVANTAGES
1) It requires no power for its operation.
2) It is easy in maintance.
3) It requires no skill for its operation being performed.
4) It is cheap as compared to other Sheller.
DISADVANTAGES
1) Sometimes the groundnuts break into pieces.
2) Manually operated so no fluctuation speed of tire resulting into stucking of
peanuts in wire mesh.
APPLICATIONS
1) Can be used in small industries.
2) Used in farms where large amount of groundnut are to be shelled.
-
8/10/2019 Manually Operated Groundnut Shelling Machine
6/6