lubrimist oil mist generators - colfax corp
TRANSCRIPT
LubriMist® Oil Mist Generators from Colfax Fluid Handling’s Reliability Services provide an efficient, centralized facility lubrication system that continuously provides the correct volume and quality of lubricant to machinery bearings and rotating equipment. LubriMist uses compressed air to produce a clean mixture of atomized, low-pressure oil mist.
These generators reduce the amount of lubricant required by utilizing a sustainable recovery and recycling program. That results in oil mist lubrication systems often paying for themselves within two years of installation, according to the ASME white paper “Large Scale Application of Pure Oil Mist Application in Petrochemical Plants” by H.P. Bloch, and numerous industry trade articles.
LubriMist® OIL MIST GENERATORSEffective, centralized lubrication systems that pay for themselves within two years of installation.
LubriMist Generators are available in eight different models to meet virtually every lubrication need:
IVT – designed for large-scale, fully-automated systems for process units requiring maximum control and monitoring and an interface with DCS. Microprocessor controlled, available in hot and cold weather packages. Up to 933-bearing-inch capacity.
JD – provides lubrication protection for intermediate-to-large systems, microprocessor control and feedback to DCS. Up to 933-bearing-inch capacity.
JR – intermediate system lubrication protection with auto-fill and a minimum external DCS, electromechanical control. Up to 500-bearing-inch capacity.
VFP – lubrication for systems with very few lubrication points with manual lubrication fill. Unit offers alarms for high/low mist pressure and low oil level. Up to 500-bearing-inch capacity.
VO – versatile, intermediate system that provides manual control and monitoring. Up to 500-bearing-inch capacity.
VM – basic oil mist generation for small, centralized systems. Up to 300-inch-bearing capacity.
LubriMate® – designed for isolated or stored equipment. Requires no electricity. A closed loop system, requires no refilling.
NV – fills critical needs of reliability and control for intermediate, multi-port systems in non-hazardous locations. Full monitoring with a six-gallon reserve. Up to 1,000-bearing-inch capacity.
LubriMist IVT
Oil Mist Generator
Operational Benefits Summary
Improved system reliability through preservation of standby equipment and superior overall lubrication of operating equipment
Optimized equipment life, with motor and pump bearing failures reduced by 80 to 90 percent
Increased lubrication system integrity
Effective lubrication of points up to 600 feet/180 meters via piping and tubing
Lubrication of up to 60 pumps and drivers with a single system
No moving parts, enhanced reliability
Enhanced return on investment in rotating equipment
Potential 20-year life cycle, low operating cost
High-return, low-risk investment
LubriMist Oil Mist generators lubricate rolling element bearings in over 2,000 large-scale oil mist systems globally. Applications include bearing lubrication as well as purging of gearboxes and small steam turbine sleeve bearings. These systems provide peace of mind to refinery, petrochemical and processing plants.
OPERATIONAL BENEFITS
ENVIRONMENTAL BENEFITSReduced oil consumption is a key feature of LubriMist Oil Mist generators: less than 40% of oil consumed in sump lubrication, with more than 50% oil recovery. Close-loop systems provide an environmentally clean option with maximum recycling and minimal discharge.
LubriMist Oil Mist Generators – precise and efficient lubrication delivery that pay for themselves – and keep you Up and Running.
COLFAX FLUID HANDLING RELIABILITY SERVICES
1740 Stebbins Drive Houston, TX 77043 USATel: +1.713.464.6266Tol: +1.888.478.6996Fax: +1.713.464.9871www.colfaxfluidhandling.com/reliability-services
www.colfaxfluidhandling.com/reliability-services
COT-PURITECHSM and LSCSM
Reliability Services
COLFAX, ALLWEILER, IMO, CLARUS, LUBRITECH, LUBRIMIST, THERMOJET, SICELUB, MISTLOCK, and LSC are registered trademarks of the Colfax Corporation or its subsidiaries in the U.S. and/or other countries.COT-PURITECH is a service of mark of Colfax Fluid Handling Reliability Services Company. ©2016 Colfax Fluid Handling Reliability Services Company. All rights reserved.