lifting beams spreader beams roll lifters coil

LIFTING BEAMS

SPREADER BEAMS

ROLL LIFTERS

COIL LIFTERS & UPENDERS

SHEET LIFTERS

PALLET LIFTERS

LIFTING TONGS

Columbus McKinnon has been manufacturing material handling equipment for over 138 years. It is our goal to manufacture high quality, long lasting lifting products that will safely increase productivity.

INDEX

CM CADY BELOW THE HOOK LIFTERS

LIF

TIN

GB

EA

MS

SP

RE

AD

ER

BE

AM

SR

OLL

LIF

TE

RS

SH

EE

TLIF

TE

RS

PA

LLE

TLIF

TE

RS

LIFT

ING

TO

NG

SC

AR

E

AN

D U

SE

CO

IL L

IFT

ER

S

& U

PE

ND

ER

SA

PP

LIC

AT

ION

EVA

LU

AT

ION

LIFTING BEAMS

Economy....................................... 2-5

Low Headroom..............................6-8

High-Capacity Lifting Beam .............9

Heavy Duty Basket Beam...............10

Twin Hoist ........................................11

Adjustable Bail.................................12

Load Leveling ............................13-14

Bulk Container Beam......................15

3 & 4 Point Pick-up ...................15-16

Twin Hoist Rotating .........................17

Chlorine Cylinder.............................17

SPREADER BEAMS

Fixed ................................................20 Adjustable .......................................21

ROLL LIFTERS

Beams..............................................24Tongs................................................25

Grabs ...............................................25Motorized.........................................25

C-Hook ............................................26Positioner.........................................26

COIL LIFTERS & UPENDERS

Narrow Coil ................................28-29C-Hooks.....................................30-32

Vertical “Eye” .............................33-34Two Sided ..................................35-37

Parking Stands................................38Upenders ...................................39-40

APPLICATION EVALUATIONS

Lifting Beams...................................56Roll Lifters ........................................57

Coil Lifters & Upenders...................58Sheet Lifters.....................................59

Tongs................................................60

SHEET LIFTERS

Plate Lifter........................................42Heavy Duty ......................................43Small Bundle ...................................44Standard Duty .................................44

Adjustable Load Lifter .....................46Wheeled, Lightweight .....................47Fixed Forks ......................................48Adjustable Forks........................49-50

LIFTING TONGS

Overview..........................................52Friction .............................................52Bale ..................................................53Die Tongs .........................................54

PALLET LIFTERS


Below-The-Hook Lifters are devices (excluding slings) that attach hoists to their loads. These lifters can be categorized into 3 types:

Supporting - Carries the load on a bearing surface(s).Indentation - Grip force indents the sides of the load. Friction - Applies sufficient coefficient of friction to support the load.

The benefits of CM Cady Lifters:Increased productivityIncreased safety of an engineered productLow costs maintenanceReliability and durabilityfor long lasting service

Every CM Cady Lifter has a Registered Nameplate as required by ASME, a BTH Rated Capacities Label, and a Product Safety Label.

DISCLAIMER: ALL PRODUCT DESIGNS ARE SUBJECT TO CHANGE WITHOUT NOTICE. PRODUCTS PICTURED IN THIS CATALOG ARE A REPRESENTATION OF A SPECIFIC DESIGN. THE PRODUCT YOU PURCHASE WILL BE DESIGNED FOR YOUR SPECIFIC APPLICATION AND MAY NOT LOOK EXACTLY LIKE THE PICTURE IN THIS CATALOG.

QUALITY & ENGINEERING

TWO QUICK DELIVERY PROGRAMS

In-Stock products ship in 3 to 5 days.*Look for this green logo and specific in-stock model numbershighlighted in green for standard products.

QuickShip products ship in 10 to 14 days.*Look for this red logo and specific model numbers highlightedin red for standard products.

TRAININGThe CMCO Training Department can help you increase the productivity and reliability of your equipment, while ensuring the safety of your workforce. Our training programscover proper maintenance, inspection and operation of rigging, hoists and cranes. Visit www.cmworks.com/trainingfor more information and class schedules.

INDUSTRY STANDARDSThe American Society of Mechanical Engineers (ASME) has developed standards that apply specifically to the devicesCM Cady designs. ASME B30.20 provides detailed informa-tion on the classifications, marking, construction, installation,inspection, testing, maintenance, and operation of below the hook lifting devices. ASME BTH-1 provides detailed infor-mation on the design criteria of below the hook lifting devices.ASME B30.9 provides detailed information on the fabrication,markings, usage, inspection, and maintenance of lifting slings.These standards serve as a guide to government authorities,manufacturers, purchasers and users of lifting devices.

CM Cady Standard Quality Assurance program follows specific design criteria as required by ASME. If you would likeyour lifter proof tested and a test certificate issued, pleasespecify at the time of order (there is a nominal charge).

* Estimated Quick Ship program shipping times exclude weekends and holidays.

)) IN-STOCK

))QUICKSHIP

MPBMULTIPLE PURPOSE LIFTING BEAM

LIF

TIN

GB

EA

MS

PRODUCT FEATURESHas adjustable lifting points.

Can handle both wide and unbalanced loads.

Low headroom capability.

Shackles included.

Converts to spreader beam with addition of top rigging.

Optional swivel hooks available.

Optional chain top rigging available.

Complies with ASME standards.

CM CADY BELOW THE HOOK LIFTERS2

Bolt Type Rated Spread Bail HR Anchor Shackle Model Capacity (in.) Adjustment Headroom (tons) Weight Number (tons) Max. Min. (in.) (in.) Top Bottom (lbs.)

MPB5004 1/4 48 12 16 7.1 1 1/2 1 1/2 37

MPB10006 1/2 72 36 24 9.94 1 1/2 1 1/2 76

MPB16 1 72 36 24 9.94 1 1/2 1 1/2 76

MPB26 2 72 36 24 12.6 3 1/4 2 128

MPB48 4 96 48 32 16.6 4 3/4 4 3/4 270

MPB510 5 120 60 40 20.2 6 1/2 4 3/4 445

MPB712 7 144 72 48 23.8 8 1/2 6 1/2 755

SPECIFICATIONS

PRODUCT OPTIONS OPTION S - Pair of swivel hooks OPTION C - Chain top rigging

Cross beams (one or two) specify spread(s), contact CM CADY Applications.

STANDARD 2 POINT LIFT

CUSTOM 3 POINT LIFT

CUSTOM 4 POINT LIFT

APPLICATIONS

Products highlighted red ship in 10 to 14 business days.))QUICKSHIP

ALBADJUSTABLE LIFTING BEAM

PRODUCT FEATURES Bail adjusts horizontally for lifting unbalanced loads. Provides clearance in low headroom applications. Spread adjusts in 6" increments along lifting beam. Shackles included. Optional swivel hooks available. Complies with ASME standards.

PRODUCT OPTIONS OPTION S - Pair of swivel hooks

CM CADY BELOW THE HOOK LIFTERS 3

Bail adjusted for unbalanced load

Lift points adjusted for load length


Rated Spread Bail Adjustment HR Shackle Model Capacity (in.) Range D Headroom Size Bail Dimensions (in.) Weight Number (tons) Max. Min. (in.) (in.) (in.) (tons) A B C T (lbs.)

ALB25006 1-1/4 72 36 24 3 14.7 2 1 1/2 3 5 5/8 150

ALB26 2 72 36 24 3 14.7 2 1 1/2 3 5 5/8 155

ALB48 4 96 54 36 6 19.8 3 1/4 2 4 7 3/4 285

ALB510 5 120 60 36 6 22.4 4 3/4 2 4 7 1 475

SPECIFICATIONS

APPLICATION

LIF

TIN

GB

EA

MS

TBSBFIXED TWIN BASKET SLING LIFTING BEAM

C

B

A

HR

T

O

SPREAD 2SPREAD 1

SPECIFICATIONS Model Number Spread (feet) Other Capacity HR Headroom (in.) Dimensions (tons) Weight (lbs.) 3* 4* 6 8 10 12 (in.)

Model Number TBSB10003 TBSB10004 TBSB10006 TBSB10008 TBSB100010 TBSB100012 A=7/8 T=3/4 1/2 HR Headroom 8-1/2 8-1/2 8-1/2 8-1/2 8-1/2 9-1/2 B=3 O=2 Weight 4 0 48 78 95 113 171 C=5

Model Number TBSB13 TBSB14 TBSB16 TBSB18 TBSB110 TBSB112 A=7/8 T=3/4 1 HR Headroom 8-1/2 8-1/2 9-1/2 10-1/2 10-1/2 11-1/2 B=3 O=2 Weight 40 48 93 136 175 239 C=5

Model Number TBSB23 TBSB24 TBSB26 TBSB28 TBSB210 TBSB212 A=7/8 T=3/4 2 HR Headroom 9-1/2 10-1/2 10-1/2 11-1/2 12-1/2 13-1/2 B=3 O=2 Weight 52 75 139 169 246 326 C=5

Model Number TBSB53 TBSB54 TBSB56 TBSB58 TBSB510 TBSB512 A=2 T=1-1/4 5 HR Headroom 13-1/2 14-1/2 15-1/2 16-1/2 17-1/2 19-1/2 B=4 O=2 Weight 104 135 211 310 423 618 C=7

Model Number TBSB753 TBSB754 TBSB756 TBSB758 A=2 T=1-1/4 7 1/2 HR Headroom 12 14 15 17 B=4 O=2 Weight 125 185 315 475 C=7

* 3 ft. and 4 ft. beams are provided with one set of bent bar hooks.

LIF

TIN

GB

EA

MS

PRODUCT FEATURES Designed to be used with slings in a basket hitch.

Provides greatest clearance in low headroom applications.

Two sets of bent bar hooks are standard on units with a spread of 6 feet and greater.

Spread 2 is 1/2 of spread 1.

Hooks are designed to handle up to a 2" sling eye width.


CM CADY BELOW THE HOOK LIFTERS4 Products highlighted red ship in 10 to 14 business days.))QUICKSHIP

APPLICATION

SPECIFICATIONS

FLBFIXED SPREAD LIFTING BEAM

PRODUCT FEATURES Provides clearance in low headroom applications. Eye hooks with hook latches standard. Fixed spread. Complies with ASME standards.

CM CADY BELOW THE HOOK LIFTERS 5Products highlighted red ship in 10 to 14 business days.))QUICKSHIP

LIF

TIN

GB

EA

MS

APPLICATION

Capacity(tons)

Model NumberHR Headroom (in.)

Weight (lbs.)

Spread (feet)Other Dimensions

(in.)2 3 4 6 8 10

1/2Model NumberHR Headroom

Weight

FLB1000213-1/4

20

FLB1000313-1/4

26

FLB1000413-1/4

33

FLB1000613-1/4

48

FLB1000814-1/4

75

FLB10001014-1/4

93

A = .75 O = .89 B = 3C = 5

1Model NumberHR Headroom

Weight

FLB1214-1/3

26

FLB1314-1/3

35

FLB1414-1/3

44

FLB1615-1/3

72

FLB1815-1/3

93

FLB11016 1/3

131

A = 1 O = .89 B = 6C = 5


Weight

FLB2316-3/4

45

FLB2416-3/4

55

FLB2617-3/4

108

FLB2819-3/4

140

FLB21019-3/4

188

A = 1 O = 1B = 6C = 5


Weight

FLB331858

FLB342087

FLB3620118

FLB3820222

FLB31020272

A = 1.5 O = 1B = 6C = 5

LHB LOW HEADROOM MULTIPLE SPREAD LIFTING BEAM

LIF

TIN

GB

EA

MS

PRODUCT FEATURESBeams over 4 feet have 3 spreads.

3 feet & 4 feet beams have 2 spreads.

Swivel hooks with hook latches standard.

Wide range of sizes and capacities available.


3 spreads to adjust to the load • Outside spread • Middle spread (outside less 1 ft.) • Inside spread (outside less 2 ft.)


Other sizes available, consult factory.

SPECIFICATIONS Model Number Outside Spread (feet) Capacity HR Headroom (in.) (tons) Weight (lbs.) 3 4 6 8 10 12 14

Model Number LHB10003 LHB10004 LHB10006 LHB10008 LHB100010 LHB100012 LHB100014 1/2 HR Headroom 12-3/4 12-3/4 12-3/4 12-3/4 13-3/4 13-3/4 14-3/4 Weight 40 50 65 95 140 160 230

Model Number LHB13 LHB14 LHB16 LHB18 LHB110 LHB112 LHB114 1 HR Headroom 12-3/4 12-3/4 13-3/4 13-3/4 14-3/4 15-3/4 16-3/4 Weight 40 50 85 115 165 230 320




Model Number LHB753 LHB754 LHB756 LHB758 LHB7510 LHB7512 LHB7514 7-1/2 HR Headroom 22-1/2 23-1/2 25-1/4 27-1/4 27-1/4 30-1/4 30-1/4 Weight 135 170 265 415 500 910 1070



Model Number LHB203 LHB204 LHB206 LHB208 LHB2010 LHB2012 20 HR Headroom 38-3/4 38-3/4 38-3/4 38-3/4 41-1/2 41-1/2 Weight 370 435 575 710 1070 1235

Model Number LHB254 LHB256 LHB258 LHB2510 LHB2512 25 HR Headroom 41-3/8 41-3/8 44-3/8 44-3/8 44-3/8 Weight 470 590 925 1100 1650

Model Number LHB304 LHB306 LHB308 30 HR Headroom 45-1/2 45-1/2 48-1/4 Weight 525 660 1010

Model Number LHB404 LHB406 40 HR Headroom 44-3/4 47-3/4 Weight 600 930


Ideal where headroom is limited.

SEEPAGE 8

SEEPAGE 8

SEEPAGE 8

SEEPAGE 8

SEEPAGE 8

SEEPAGE 8

SEEPAGE 8

SEEPAGE 8

SEEPAGE 8


Outside Spread (feet) Other 16 18 20 24 30 Dimensions (in.)

LHB100016 LHB100018 LHB100020 LHB100024 LHB100030 A=7/8 T=3/4 15-3/4 16-3/4 16-3/4 20-1/4 22-1/4 B=3 O=7/8 305 400 450 830 1340 C=5

LHB116 LHB118 LHB120 LHB124 A=7/8 T=3/4 18-1/2 20-1/4 20-1/4 22-1/4 B=3 O=7/8 415 605 675 1095 C=5

LHB216 LHB218 LHB220 LHB224 A=7/8 T=3/4 20-1/4 24-3/4 24-3/4 27-3/4 B=3 O=7/8 540 800 900 1730 C=5

LHB316 LHB318 LHB320 LHB324 A=1-1/4 T=1 24-1/2 27-1/2 27-1/2 27-1/2 B=3 O=1 730 1295 1450 1765 C=5

LHB516 LHB518 LHB520 LHB524 A=2 T=1-1/4 30-1/4 30-1/4 30-1/4 33-1/4 B=4 O=1-3/8 1210 1340 1505 2275 C=7

LHB7516 LHB7518 A=2 T=1-1/4 30-1/4 33 B=4 O=1-1/2 1210 1665 C=7

LHB1016 LHB1018 A=2 T=1-1/4 33 33 B=4 O=1-9/16 1500 1670 C=7

A=2-1/2 T=1-1/2 B=5 O=2-1/16 C=9

A=2-1/2 T=1-1/2 B=5 O=2-1/4 C=9

A=3 T=1-3/4 B=6 O=2-1/4 C=12

A=3-1/2 T=2 B=7 O=2-1/4 C=16

A=3-1/2 T=2-1/2 B=7 O=3 C=16

SPECIFICATIONS

OPTION BFaspins

For ease of positioning hooks with quick release.

Specify number required.

OPTION CExtra Hooks

Allows for multiple pick points. Specify number required.

OPTION DPin Type Bail

Lifting pin located between structural channel. (Hoist hook information must be supplied.)

OPTION EShackle Lug

Lifting lug with shackle. (Headroom may change.)

OPTION AExtra Holes or Different

Placement of HolesAllows multiple hook positioning

beyond standard 3 spreads. Specify number & spread(s) required.

Recommend Faspins (Option B) if frequent hook position changes (spread) are required.


LIF

TIN

GB

EA

MS

SEEPAGE 8

SEEPAGE 8

SEEPAGE 8

SEEPAGE 8

SEEPAGE 8

SEEPAGE 8

SEEPAGE 8

SEEPAGE 8

SEEPAGE 8

SEEPAGE 8

SEEPAGE 8

SEEPAGE 8

SEEPAGE 8

SEEPAGE 8

SEEPAGE 8

SEEPAGE 8

SEEPAGE 8

SEEPAGE 8

SEEPAGE 8

SEEPAGE 8

SEEPAGE 8

SEEPAGE 8

SEEPAGE 8

SEEPAGE 8

SEEPAGE 8

SEEPAGE 8

SEEPAGE 8

SEEPAGE 8

SEEPAGE 8

SEEPAGE 8

SEEPAGE 8

SEEPAGE 8

SEEPAGE 8

SEEPAGE 8

SEEPAGE 8

LHMB LOW HEADROOM MULTIPLE SPREAD LIFTING BEAM

LIF

TIN

GB

EA

MS

PRODUCT FEATURES “I” beam construction.

Three spreads to adjust to the load • Outside spread • Middle spread (outside less 1 ft.) • Inside spread (outside less 2 ft.)





Model Number Outside Spread (feet) Other Capacity Headroom (in.) Dimensions (tons) Weight (lbs.) 8 10 12 14 16 18 20 24 30 (in.)

Model Number LHMB130 1 HR Headroom 27.5 Weight 1500




Model Number LHMB7520 LHMB7524 LHMB7530 7-1/2 HR Headroom 34.75 34.75 35 Weight 1325 1890 2790

Model Number LHMB1020 LHMB1024 LHMB1030 10 HR Headroom 35.75 36 37.75 Weight 1465 2075 3150

Model Number LHMB1516 LHMB1518 LHMB1520 LHMB1524 LHMB1530 15 HR Headroom 41.5 41.75 42 43.5 42.25 Weight 1361 1610 1915 2690 4255

Model Number LHMB2014 LHMB2016 LHMB2018 LHMB2020 LHMB2024 LHMB2030 20 HR Headroom 45.75 46 46.25 48 48.5 49.25 Weight 1210 1510 1885 2225 3155 5040

Model Number LHMB2514 LHMB2516 LHMB2518 LHMB2520 LHMB2524 LHMB2530 25 HR Headroom 54.75 55 56.75 59.75 60 60.75 Weight 1540 1900 2230 2725 3685 5530

Model Number LHMB3010 LHMB3012 LHMB3014 LHMB3016 LHMB3018 LHMB3020 LHMB3024 LHMB3030 30 HR Headroom 54.5 56.5 56.5 56.75 62.25 62.5 63 68.75 Weight 1150 1395 1695 2050 2380 2850 4040 5725 Model Number LHMB408 LHMB4010 LHMB4012 LHMB4014 LHMB4016 LHMB4018 LHMB4020 LHMB4024 LHMB4030 40 HR Headroom 65.75 66.25 66.25 66.25 68.75 69.25 72 75.25 78.5 Weight 1200 1550 1840 2220 2400 3100 3680 4920 6810

SPECIFICATIONS

A=7/8B=3C=5

A = 7 / 8B=3C=5

A=1-1/4B=3C=5

A=2B=4C=7

A=2B=4C=7

A=2B=4C=7

A=2-1/2B=5C=9

A=2-1/2B=5C=9

A=3B=6C=12

A=3-1/2B=7C=16

A=3-1/2B=7C=16

T=3/4O=7/8

T=3/4O=7/8

T=1O=1

T=1-1/4O=1-15/16

T=1-1/4O=1-1/2

T=1-1/4O=1-9/16

T=1-1/2O=2-1/16

T=1-1/2O=2-1/4

T=1-3/4O=2-1/4

T=2O=2-1/4

T=2-1/2O=3

Shown with optional Built-In Stand and different hole placement.

OPTION BExtra Shackles and Swivel Hooks Allows for multiple pick pointsor eliminates the need to move hardware for different size loads.

OPTION CBuilt In StandKeeps beam upright for easy crane hook attachment (pictured above).

OPTION AExtra Holes or DifferentPlacement of HolesAllows multiple hook positioning beyond standard 3 spreads. Specify number and spread(s) required.


SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

SEE PAGES6 & 7

HCLBHIGH-CAPACITY LIFTING BEAM PRODUCT FEATURES

Heavy duty “I” beam construction. Built in beam stands for easy storage. Pin bail to allow for quick attachment of large crane hook.

Beams have three spreads for flexibility. Lifting shackles are standard. Complies with ASME standards.


LIF

TIN

GB

EA

MS

SPECIFICATIONS

Dimensions (inches)

Capacity Model Spread Overall HR Overall Weight (tons) Number (ft.) Width Headroom Height A B C SW (lbs.)

HCLB5010 10 138 60.31 70.31 2881 50 HCLB5015 15 198 60.73 70.73 5 8 19.5 40 3841 HCLB5020 20 258 61.25 71.25 5161

HCLB6510 10 138 61.38 70.51 3059 65 HCLB6515 15 198 64.5 73.63 5 8 19.5 40 4117 HCLB6520 20 258 67.8 76.93 5801

HCLB8010 10 138 67.1 76.98 3663 80 HCLB8015 15 198 70.21 80.09 5.5 8 21.25 44 4808 HCLB8020 20 258 73.56 83.44 6674


OVERALL LENGTH

SPREAD

SPREAD - 1

SPREAD - 2

OVERALLHEIGHT

AB

C

HR

SW

HDBB HEAVY DUTY TWIN BASKET SLING LIFTING BEAM

LIF

TIN

GB

EA

MS

PRODUCT FEATURESDesigned to be used with slings in a basket hitch.

Specially designed hooks with hook latches minimize potential sling damage.

Two sets of fixed hooks are standard in all lengths over 4 feet.

The inner set of hooks (S2) are 1/2 the overall spread.

Extra spreads available upon request.



C

B A

S2

HR

T

O

SPREADConsult factory for lifting sheets or

packages of glass. Special Web Slings are available for all applications.

Model Number Spread (feet) Capacity HR Headroom (in.) Other (tons) Weight (lbs.) 3 4 6 8 10 12 14 16 18 20 24 30 Dimensions (in.)

Model Number HDBB10003 HDBB10004 HDBB10006 HDBB10008 HDBB100010 HDBB100012 HDBB100014 HDBB100016 HDBB100018 HDBB100020 HDBB100024 HDBB100030 1/2 HR Headroom 8-1/2 8-1/2 8-1/2 8-1/2 9-1/2 9-1/2 10-1/2 10-1/2 11-1/2 11-1/2 12-1/2 13-1/2 Weight 50 65 110 150 200 220 298 331 424 463 627 855

Model Number HDBB13 HDBB14 HDBB16 HDBB18 HDBB110 HDBB112 HDBB114 HDBB116 HDBB118 HDBB120 HDBB124 HDBB130 1 HR Headroom 8-1/2 8-1/2 9-1/2 10-1/2 10-1/2 11-1/2 11-1/2 12-1/2 13-1/2 13-1/2 15-1/2 15-1/2 Weight 50 65 145 210 230 290 338 390 539 588 907 1150


Model Number HDBB53 HDBB54 HDBB56 HDBB58 HDBB510 HDBB512 HDBB514 HDBB516 HDBB518 HDBB520 HDBB524 HDBB530 5 HR Headroom 13-1/2 14-1/2 15-1/2 16-1/2 16-1/2 16-1/2 19 19-1/2 22-1/2 22-1/2 22-1/2 25-1/2 Weight 90 160 275 350 450 500 854 940 1398 1650 2144 2330

Model Number HDBB753 HDBB754 HDBB756 HDBB758 HDBB7510 HDBB7512 HDBB7514 HDBB7516 HDBB7518 HDBB7520 HDBB7524 HDBB7530 7-1/2 HR Headroom 14-1/2 15-1/2 16-1/2 17-1/2 17-1/2 19-1/2 22-1/2 22-1/2 22-1/2 22-1/2 25-1/2 25-1/2 Weight 155 180 330 410 500 700 1162 1300 1468 1606 2354 2877


Model Number HDBB153 HDBB154 HDBB156 HDBB158 HDBB1510 HDBB1512 HDBB1514 HDBB1516 HDBB1518 HDBB1520 HDBB1524 HDBB1530 15 HR Headroom 18-1/2 19-1/2 21-1/2 21-1/2 24-1/2 27-1/2 27-1/2 27-1/2 27-1/2 27-1/2 27-1/2 30 Weight 397 471 970 1240 1256 1980 2065 2100 2391 2584 4045 4100

Model Number HDBB203 HDBB204 HDBB206 HDBB208 HDBB2010 HDBB2012 HDBB2014 HDBB2016 HDBB2018 HDBB2020 HDBB2024 HDBB2030 20 HR Headroom 19-1/2 21-1/2 21-1/2 24-1/2 24-1/2 24-1/2 27-1/2 27-1/2 27-1/2 27-1/2 31 31 Weight 253 328 910 1000 1150 1740 1935 2210 2480 2755 3500 4500

SPECIFICATIONS

A=7/8 T=3/4B=3 O=1-1/16C=5

A=7/8 T=3/4B=3 O=1-1/8C=5

A=7/8 T=3/4B=3 O=1-1/8C=5

A=2 T=1B=4 T=1-1/4*C=7 O=1-1/8

A=2 T=1-1/4B=4 O=1-3/4C=7

A=2 T=1-1/4B=4 O=1-3/4C=7

A=2-1/2 T=1-1/2B=5 O=4C=9

A=2-1/2 T=1-1/2B=5 O=4C=8

THLBTWIN HOIST LIFTING BEAM


LIF

TIN

GB

EA

MS

OPTION CCenter bail and extra pair of

hooks for maximum versatility.

OPTION AOff-set hook for hoistsof different capacities.

OPTION BMultiple load hooks,

some outside the bail span.

SPREADT

A B

C

HRO

See RLB (page 17) for Twin Hoist Rotating Beam

PRODUCT FEATURESUse two or more hoists to increase lifting stability.

Swivel hook with hook latch.

Several options are available for added versatility.


Model Number Spread (feet) Capacity HR Headroom (in.) Other (tons) Weight (lbs.) 6 8 10 12 14 16 18 20 24 Dimensions (in.)

Model Number THLB26 THLB28 THLB210 THLB212 THLB214 THLB216 THLB218 THLB220 THLB224 2 HR Headroom 16-3/4 16-3/4 17-3/4 17-3/4 18-3/4 18-3/4 18-3/4 18-3/4 19-3/4 Weight 125 160 240 280 360 400 530 660 790

Model Number THLB46 THLB48 THLB410 THLB412 THLB414 THLB416 THLB418 THLB420 THLB424 4 HR Headroom 20 21 22 23 23 25 25 25 26 Weight 160 240 310 410 500 725 805 890 1695

Model Number THLB66 THLB68 THLB610 THLB612 THLB614 THLB616 THLB618 THLB620 THLB624 6 HR Headroom 27-1/2 28-1/2 28-1/2 30-1/2 30-1/2 30-1/2 30-1/2 30-1/2 31-1/2 Weight 220 300 380 550 640 780 1310 1450 1735

Model Number THLB106 THLB108 THLB1010 THLB1012 THLB1014 THLB1016 THLB1018 THLB1020 THLB1024 10 HR Headroom 29 29 32 32 32 32 32 32 33 Weight 340 420 800 920 1100 1220 1705 1840 2230

Model Number THLB158 THLB1510 THLB1512 THLB1514 THLB1516 THLB1518 THLB1520 15 HR Headroom 38-1/4 38-1/4 38-1/4 41-1/4 41-1/2 41-1/2 41-1/2 Weight 740 865 1050 1930 2158 2290 2500

Model Number THLB208 THLB2010 THLB2012 THLB2014 THLB2016 THLB2018 20 HR Headroom 35-1/2 38-1/2 38-1/2 38-1/2 38-1/2 38-1/2 Weight 830 1130 1266 1926 2196 2430

Model Number THLB308 THLB3010 THLB3012 30 HR Headroom 54 54 54 Weight 1120 1325 1610

Model Number THLB408 THLB4010 THLB4012 40 HR Headroom 58-1/2 58-1/2 58-1/2 Weight 1165 1470 1700

SPECIFICATIONS

A=1-1/2 T=5/8B=3 O=1-1/8C=5

A=1-1/2 T=5/8B=3 O=1-1/2C=5

A-1-1/2 T=3/4B=3 O=2-1/16C=5

A=2 T=1B=4 O=2-1/4C=7

A=2 T=1-1/4B=4 O=2-1/4C=7

A=2 T=1-1/4B=4 O=3C=7

A=2-1/2 T=1-1/2B=5 O=3-3/4C=9

A=2-1/2 T=1-1/2B=5 O=4-1/4C=9

OPTION D Roller bearing hook shown

(standard on 30 and 40 ton models)as shown in photo.

ABB ADJUSTABLE BAIL LIFTING BEAM

LIF

TIN

GB

EA

MS


OPTION A*Extra Holes

Allows for multiple hookpositioning. Specify number

and spread(s) required. *Could increase headroom.

C

O

B A

HR

T

E E

DTYP.

SPREAD

SPECIFICATIONS

OPTION BFaspins

For ease of positioning hooks with quick release.

Specify number of faspins required.

OPTION CExtra Hooks

Allows for multiple pick points. Specify number

of hooks required.

OPTION DLower Headroom

Lifting pin located betweenstructural channel. (Hoist hook information must

be supplied.)

PRODUCT FEATURES Handles off center loads by adjusting the bail before a lift.

Adjustable spread options available. Swivel hooks with hook latches standard. Wide range of sizes and capacities available. Complies with ASME standards.

Rated Model Number Spread (feet) Capacity HR Headroom (in.) Other

(tons) Weight (lbs.) 3 4 6 8 10 12 14 16 18 20 Dimensions (in.)

Model Number ABB10003 ABB10004 ABB10006 ABB10008 ABB100010 ABB100012 ABB100014 ABB100016 ABB100018 ABB1000201/2 HR Headroom 13-1/2 13-1/2 13-1/2 12-5/8 13-1/2 13-1/2 13-1/2 14-1/2 14-1/2 14-1/2

Weight 47 56 75 82 95 147 168 255 278 304

Model Number ABB13 ABB14 ABB16 ABB18 ABB110 ABB112 ABB114 ABB116 ABB118 ABB1201 HR Headroom 13-1/2 13-5/8 13-5/8 14-5/8 14-5/8 14-5/8 15-5/8 15-5/8 16-1/2 16-1/2 Weight 47 56 83 126 170 198 268 298 409 449

Model Number ABB23 ABB24 ABB26 ABB28 ABB210 ABB212 ABB214 ABB216 ABB218 ABB2202 HR Headroom 14 15-1/8 15-1/8 16-1/8 18-1/2 17-1/8 18-1/4 18-1/4 19-1/2 19-1/2 Weight 48 89 117 170 240 278 369 416 547 605

Model Number ABB53 ABB54 ABB56 ABB58 ABB510 ABB512 ABB514 ABB516 ABB518 ABB5205 HR Headroom 21-1/2 21-1/2 21-1/2 22-1/2 23-1/2 27 27 28 29 30-3/8 Weight 140 160 215 304 430 633 664 746 1321 1525

Model Number ABB103 ABB104 ABB106 ABB108 ABB1010 ABB1012 ABB1014 ABB1016 ABB1018 ABB102010 HR Headroom 25-3/4 25-3/4 28-3/4 28-3/4 31-3/4 31-3/4 31-3/4 31-3/4 34-3/4 34-3/4

Weight 210 211 432 522 759 993 1128 1257 1738 1908

Model Number ABB153 ABB154 ABB156 ABB158 ABB1510 ABB1512 ABB1514 ABB1516 15 HR Headroom 28-1/4 30-1/2 33-1/2 33-1/2 33-1/2 37 37 37

Weight 252 330 502 542 882 1455 1630 1800

Model Number ABB203 ABB204 ABB206 ABB208 ABB2010 ABB2012 20 HR Headroom 31 34 37 34 37 37

Weight 315 399 735 720 1276 1251

Other D=3 D=3 D=3 D=4 D=4 D=4 D=6 D=6 D=6 D=6 Dimensions (in.) E=6 E=9 E=12 E=16 E=20 E=24 E=30 E=36 E=42 E=48

A=1-1/2 T=5/8B=3 O=1C=5

A=1-1/2 T=5/8B=3 O=1C=5

A-1-1/2 T=3/4B=3 O=1C=5

A=2 T=1B=4 O=1C=7 O=1-1/2*

A=2 T=1-1/4B=4 O=1-3/4C=7

A=2-1/2 T=1-1/2B=5 O=2C=9

A=2-1/2 T=1-1/2B=5 O=2C=9

LLLB LOAD LEVELINGLIFTING BEAM


OPTION AExtra Holes

Allows for multiple hook positioning. Specify number

and spread(s) required.*Could increase headroom.

Bail Adjustment (in.) D=8 D=12 D=16 D=20 D=24 D=28 D=32 D=36 D=40 D=48

SPECIFICATIONS (chain wheel model only)

OPTION BFaspins

For ease of positioning hooks with quick release. Specify number of faspins required.

OPTION CExtra hooks

Allows for multiple pick points. Specify

number of hooks required.

PRODUCT FEATURES Handles off center loads by adjusting the bail before a lift.

Infinite adjustment of bail within range.




Adjust manual chain wheel before lift.

Rated Model Number Spread (feet) Capacity HR Headroom (in.) Other (tons) Weight (lbs.) 4 6 8 10 12 14 16 18 20 24 Dimensions (in.)

Model Number LLLB24 LLLB26 LLLB28 LLLB210 LLLB212 LLLB214 LLLB216 LLLB218 LLLB220 LLLB224 2 HR Headroom 15-1/8 15-1/8 16-1/8 17-1/8 17-1/8 18-1/8 18-1/8 19-1/8 19-1/8 20-1/8 Weight 135 185 260 329 377 481 538 680 750 1265



Model Number LLLB154 LLLB156 LLLB158 LLLB1510 LLLB1512 LLLB1514 LLLB1516 15 HR Headroom 30-1/2 33-1/2 33-1/2 33-1/2 36-1/2 36-1/2 36-1/2 Weight 376 565 622 972 1319 1418 1513

Model Number LLLB204 LLLB206 LLLB208 LLLB2010 LLLB2012 20 HR Headroom 34 37 37 37 37 Weight 445 798 900 1050 1353

A=1-1/2 T=5/8B=3 O=1C=5

A=2 T=1B=4 O=1C=7

A-2 T=1-1/4B=4 O=1-3/4C=7

A=2-1/2 T=1-1/2B=5 O=1-3/4C=9

A=2-1/2 T=1-1/2B=5 O=2C=9

LIF

TIN

GB

EA

MS

MOTORIZED LOAD LEVELING BEAM

LIF

TIN

GB

EA

MS


PRODUCT FEATURES Motorized beam adjusts to the center of gravity during lift.

Swivel hooks with hooklatches are standard.

Custom sizes are available. Push button pendent control with radio control option.

Standard bail adjustment 6" each side of center, with optional 12" adjustment each side of center available.

Complies with ASME standards. Leveling uneven loads during the lift saves rigging time and promotes a safer work environment.

SPECIAL 4-POINT MOTORIZED BEAM WITH LOAD GUIDES.

Ideal for Bundles, Odd or Irregular Shaped Loads, Weldments, Paper Roll Handling & Sheet Handling.

BCBBULK CONTAINER LIFTING BEAM


LIF

TIN

GB

EA

MS


PRODUCT FEATURES Constructed of tubing for smooth surface with no sharp edges.

Low headroom design. Easily attach to load with open lifting lugs. Lug spacing will hold up to a 3" wide loop. Oversized lifting eye to accept a wide range of hooks.


AFPB STANDARD ADJUSTABLE FOUR POINT LIFTING BEAMPRODUCT FEATURES

Low headroom design. Swivel hooks with latches standard. Adjustable spreads on 1' increments. Faspins for easy crossarm adjustment. Complies with ASME standards.

Model Capacity Span Weight Number (lbs.) (in.) (lbs.)

BCB136 2200 36 150

BCB148 2200 48 185

BCB236 4400 36 155

BCB248 4400 48 190

Other sizes available, please consult factory.

SPECIFICATIONS

Note: All dimensions shown in inches.

SPECIFICATIONS

TYP

6.00 TYP

C

AB

HR

MAIN BEAM MIN.

MAIN BEAM MAX.

O

T

CROSSARMMIN.

CROSSARMMAX.

6.00 TYP

HR

Dimensions (inches) Model Capacity Main Beam Crossarms Bail Weight Number (tons) Min./Max. Min./Max. A B C T O (lbs.)

AFPB384 3 36/84 24/60 1.25 3 5 1 0.97 375

AFPB5120 5 48/120 36/96 2 4 7 1.25 1.06 760

AFPB10144 10 72/144 36/96 2 4 7 1.25 1.41 1530

Custom sizes and capacities available. Please fill out the Lifting Beam Application Evaluation.

FPB FOUR POINT LIFTING BEAM

TPB THREE POINT LIFTING BEAM

LIF

TIN

GB

EA

MS

This low headroom lifting beam handles large loads using multiple pick points. Each unit is custom designed for your specific application. Complies with ASME standards.


OPTION AMultiple Bails

Use 2 or 4 hoists toincrease lifting stability.

OPTION BAdjustable Bail

Is used when load-leveling capability is required along length of load.

OPTION CAdjustable Spread

Use when adjustability in length and width is required.

OPTION AMultiple Bails

Use 2 hoists to increase lifting stability.

OPTION BAdjustable Bail

Is used when load-leveling capability is required along length

of load.

OPTION CAdjustable Spread

Use when adjustability in lengthand width is required.

This low headroom lifting beam handles largeloads using multiple pick points. Each unit is custom designed for your specific application.Complies with ASME standards.

Shown with Option B

RLB TWIN HOIST ROTATING LIFTING BEAMA specially designed lifting and rotating beam using two cranes or two hoists to horizontally rotate a load. A position locking pin holds the load rotation at a designated position. Available with motorized rotation.


LIF

TIN

GB

EA

MS

Positioning Locking Pin

Heavy DutyRotation Bearing

Swivel Hooksw/Latches

Twin Bails

OPTION ATwin Hooks

Used in conjunction withbasket hitch slings.

OPTION BJ Hooks

Generally required to lift paper rolls or similar application.

Use Paper Roll Lifters Application Evaluation on page 57.

OPTION CMotorized Rotation

Allows remote positioning of a load.

OPTION DLower Head Room Bails

Utilized when headroom must be held to a minimum.Crane hook data must be

supplied, see page 56.

PRODUCT FEATURES Wide range of sizes and capacities available.

Maximum 20 feet (upper and lower) beam length.


CCB CHLORINE CYLINDER LIFTING BEAMDesigned to efficiently handle standard chlorine gas cylinders. Standard size determined by the Chlorine Institute is 80-3/4" to 82-1/4" in length. Special low headroom modification is available.

2 TON CAP.

3 7/85

3/4

HR

80-3/4 TO 82-1/4SPREAD

Note: All dimensions shown in inches.

HR Model Capacity Headroom Weight Number (tons) (in.) (lbs.)

CCB2165 2 16-1/2 - 15-1/2 105

SPECIFICATIONS


FSBFIXED SPREADER BEAM

SP

RE

AD

ER

BE

AM

S

PRODUCT FEATURES Ideal where headroom is not limited. Adds stability to lift. Available with standard chain or wire rope rigging.

Available with Adjust-A-Leg® rigging for off center load adjustment (minimum lifting capacity will be approximately 10-15% of beam rating).

Wide range of additional sizes and capacities available.


Specify Top Rigging


NOTE: Weight = Beam and hooks only - (no top rigging).

OPTION WWire rope top rigging from

beam to crane hook.

Model Number Spread (feet) Capacity HR Headroom (in.) Other (tons) Weight (lbs.) 4 6 8 10 12 16 20 24 Dimensions (in.)

Model Number FSB24 FSB26 FSB28 FSB210 FSB212 FSB216 FSB220 FSB224 2 HR Headroom 34 46 58 70 82 106 132 156 Weight 45 60 82 95 115 225 408 445





Model Number FSB306 FSB308 FSB3010 FSB3012 FSB3016 FSB3020 30 HR Headroom 60 70 83 95 120 145 Weight 285 402 440 530 888 1390

Model Number FSB406 FSB408 FSB4010 FSB4012 FSB4016 40 HR Headroom 65 77 89 102 127 Weight 563 695 781 1058 1364

OPTION CChain top rigging from beam to crane hook.

OPTION AAdjust-A-Leg® sling top rigging for off-center load adjustment (not included in QuickShip Program).

SHOWN WITH OPTION C

SPECIFICATIONS

A=1/2 F=4-1/4B=2-1/2 O=31/32C=5

A=1 F=6B=3-1/2 O=1-1/16C=7

A=1-1/4 F=8-1/8B=4-3/8 O=1-1/2C=8-3/4

A=1-1/2 F=9-1/4B=5-1/4 O=1-3/4C=10-1/2

A=1-3/4 F=9-3/4B=6 O=2C=12

A=1-3/4 F=9-3/4B=6 O=2C=12

A=2 F=13B=7 O=2-3/4C=14

TOP RIGGING OPTIONS

ADJSBADJUSTABLE SPREADER BEAMPRODUCT FEATURES

Ideal where headroom is not limited.

Adds stability to lift.

Telescopic spread standard.

Available with standard chain or wire rope rigging.

Available with Adjust-A-Leg® rigging for off centerload adjustment (minimum lifting capacity will beapproximately 10-15% of beam rating).

Wide range of additional sizes and capacities available.


Specify Top Rigging


SP

RE

AD

ER

BE

AM

S

HR

C

B

A

45°

SPREAD

F

O

SHOWN WITH OPTION C

HR Headroom Weight A B C F - Hook O - Hook Chain Spread Min./Max. Beam & Oblong Oblong Oblong To Beam Opening Rigging Capacity Model (ft.) w/chain Hooks Dia. Width Height Bottom w/latch Weight (tons) Number Min./Max. (in.) (lbs.) (in.) (in.) (in.) (in.) (in.) (lbs.)

ADJSB24 4 / 6 48/57 70 9 2 ADJSB26 6 / 10 72/88 85 1/2 2.36 3.94 5.5 0.97 13 ADJSB28 8 / 14 96/113 175 17 ADJSB212 12 / 20 132/166 245 23

ADJSB54 4 / 6 55/64 105 34 5 ADJSB56 6 / 10 79/95 160 1 3.94 7.09 8.4 1.41 47 ADJSB58 8 / 14 102/126 205 61 ADJSB512 12 / 20 138/172 670 82

ADJSB104 4 / 6 60/69 95 49 10 ADJSB106 6 / 10 74/111 175 1-1/4 5.51 10.63 10.6 1.78 69 ADJSB108 8 / 14 108/132 460 88 ADJSB1012 12 / 20 144/163 680 118

ADJSB154 4 / 6 64/72 165 78 15 ADJSB156 6 / 10 87/104 365 1-1/2 5.25 10.5 13.6 2.22 111 ADJSB158 8 / 14 111/135 478 145 ADJSB1512 12 / 20 147/180 700 194

SPECIFICATIONS

OPTION WWire rope top rigging from

beam to crane hook.

OPTION CChain top rigging from beam to crane hook.

OPTION AAdjust-A-Leg® sling top rigging for off-center load adjustment (not included in QuickShip Program).

TOP RIGGING OPTIONS

SRB STANDARD ROLL LIFTING BEAM

RO

LL

LIF

TE

RS

PRODUCT FEATURES Standard beam sizes. J-Hooks are custom cut per order to fit your specific application.

Hooks can be fixed or pivot style. J-Hooks are infinitely adjustable betweenminimum & maximum spread.


SPECIAL ROLLLIFTING BEAM

PRODUCT FEATURES Ideal where headroom is limited. Easy lifting and positioning of rolls. Adjustable spread options. Twin hoist capability. Motorized rotation available. Complies with ASME standards.


OPTION ESpreader Beam

Offers greater stability when required headroom

is not a consideration.

OPTION AAdjustable Spreads

Used when handling rolls of varying widths.

OPTION BHook Linings

a. Bronze/Brassb. Urethanec. Brake Lining

(Min. Shaft Dia. = 6")

OPTION C Twin Bails

Used when two hoists are required to stabilize a lift, when load rotation

is not desirable.

OPTION DMotorized Rotation

Allows remote positioning of a load.

For additional info, see Model RLB on page 17.

Used to lift rolls with plate style or bent bar J-Hooks. Hooks aredesigned to support the core mandrel which is through the I.D.of the roll. Fixed beam lengths can be used for single roll widths.Maximum roll diameters will determine length of J-Hooks.

ROLL GRIPPING TONGS


NAMEPLATE

Used to grip the O.D. of a roll. The diameter range can vary upto 25%. A double leg design will provide additional roll stability;however, single leg models are available for narrower rolls.Recommend double leg for rolls wider than 48".

CAPACITIESDOUBLE LEG: UP TO 4 TONSSINGLE LEG: UP TO 2 1/2 TONS

PRODUCT FEATURESAutomatic latching mechanism for single-person operation.Tong saddles with protective covering to prevent roll damageare available.

ROLL GRABSUsed for side lifting of rolls by gripping on the ends. A wide range of roll lengths or widths can be accommodated.Motorization is recommended when handling a wide range of roll widths.

CAPACITIES UP TO 5 TONS

MOTORIZED ROLL LIFTERUsed to lift rolls by positioning lifting pins in the I.D. of the roll. Arms move in and out to clear and lift roll. This model will handle a variety of widths with minimal aisle clearance requirements. Motorization is recommended;however, chainwheel operation is available.


RO

LL

LIF

TE

RS

RO

LL

LIF

TE

RS


ROLL LIFTING C-HOOKSThe CM Cady Roll Lifting C-Hook is designed to handle rolls by inserting a round arm into the roll I.D. This unit is counter balanced to hang level when empty for ease of insertion into the roll core. Guide handle is standard. Lifter parking stand can be furnished if required.


ROLL POSITIONERSThe CM Cady Low Platform Roll Upender/Downender allows rolls to be repositioned by 90° rotation. The low platform is desirable in those applications where headroom is restricted. Hydraulic controls are standard.

CAPACITIES UP TO 7 1/2 TONS

The Heavy Duty Roll Positioner is available with a mechanical drive. This model requires additional platform height.


NCCNARROW COIL C-HOOKPRODUCT FEATURES

Handles narrow coils with less coil edge damage. More durable than web slings. Lightweight for easier handling. Built in guide handle for ease of coil positioning. Available with optional curved coil saddle. Inside radius on hooks avoid coil edge contact. Complies with ASME standards.


CO

IL L

IFT

ER

S

& U

PE

ND

ER

S


*Will not hang level when empty.

SPECIFICATIONS

Coil Lifting Arm Plate Bail Dimensions Model Capacity Width Length Depth HR Weight Number (tons) Max. Throat L D Headroom A B C T (lbs.)

NCC10008 1/2 8 14-1/2 8 2-1/4 18-1/2 13/16 2 3-1/4 1/2 14 NCC100012 12 14-1/2 12 2-5/8 18-1/2 13/16 2 3-1/4 1/2 17

NCC18 1 8 17-1/2 8 2 21-1/2 13/16 2 3-1/4 1/2 15 NCC116 16 17-1/2 16 2-1/2 21-1/2 13/16 2 3-1/4 1/2 20

NCC28 2 8 19-1/2 8 2-1/8 24-9/16 1 2-9/16 4-1/16 3/4 22 NCC216 16 19-1/2 16 3 24-9/16 1 2-9/16 4-1/16 3/4 40

NCC3512 3-1/2 12 21-1/2 12 2-7/8 28-1/8 1-3/16 3-5/8 5-5/16 1 50 NCC3516 16 21-1/2 16 3-3/8 28-1/8 1-3/16 3-5/8 5-5/16 1 63

NCC516 5 16 25-1/2 16 3-1/2 32-13/16 1-1/2 4 5-13/16 1-1/4 94 NCC520 20 25-1/2 20 4 32-13/16 1-1/2 4 5-13/16 1-1/4 110

Dimensions (inches)

NOTE: E dimension equals one-half the dimension of L + 1/2".

LOAD CENTER OF GRAVITY MUST BE IN-LINE WITH THE

CENTER OF THE HOIST.

W A R N I N G

DCHDIXON COIL HOOKPRODUCT FEATURES

Easy horizontal to vertical upending of coils. Pivoting wedge for easy tilting of stacked coils. Wedge acts as retainer. Efficient and easy to use. Popular for use with small, lightweight coils. For use where overhead clearance is limited. Specially designed heat treated pivoting wedge. Complies with ASME standards.

CM CADY BELOW THE HOOK LIFTERS 29)) IN-STOCK Products highlighted green ship in 3 to 5 days.

CO

IL L

IFT

ER

S

& U

PE

ND

ER

S

AC

B

MAX.WIDTH

RADIAL

T

D

W


SPECIFICATIONS

Dimensions (inches) Model Capacity Max. Max. Min. Weight Number (tons) Width Radial I.D. A B C D T W (lbs.)

DCH1000613 1/2 6 13 9 13/16 2 3-5/16 6 1/2 3-1/2 20

DCH10001213 1/2 12 13 13 13/16 2 3-5/16 6 1/2 3-1/2 28

DCH1816 1 8 16 10 13/16 2 3-5/16 6 1/2 3-1/2 23

DCH21018 2 10 18 12-1/2 1 2-5/8 4 6-3/4 3/4 2 42

DCH351220 3-1/2 12 20 14-1/2 1-3/16 3-5/8 5-5/16 7-3/4 1 2-1/2 80

HDCHEAVY DUTY C-HOOK


CO

IL L

IFT

ER

S

& U

PE

ND

ER

S



PRODUCT FEATURESDesigned for heavy duty applications.

High tensile alloy steel plate reduces physical size and weight.

Counter balanced to hang level when empty.

Inside radius on hooks avoid coil edge contact.

Curved coil saddle is standard.

Guide handles for ease of hook positioning.

Handles a wide range of coil widths.

Available with optional padding for additional coil protection.


Dimensions (inches)

Lifting Arm Bail Dimensions

Model Capacity Coil Width Length Depth Width HR Opening Thk. Weight Number (tons) Max. Min. Throat L D W Headroom A B C T (lbs.)

HDC536 36 24 24 30 5-5/16 4 37-3/8 1-1/2 4 7 1-1/4 420 HDC548 5 48 30 24 39 6-1/8 4 38 1-1/2 4 7 1-1/4 584 HDC560 60 36 24 48 6-9/16 4 38-1/2 1-1/2 4 7 1-1/4 680

HDC7536 36 24 24 30 5-5/8 4 37-1/2 1-1/2 4 7 1-1/2 615 HDC7548 7-1/2 48 30 24 39 6-5/16 4 38-1/4 1-1/2 4 7 1-1/2 774 HDC7560 60 36 24 48 6-5/16 4 39 1-1/2 4 7 1-1/2 942

HDC1048 48 30 24 39 7-1/4 4 41-1/4 2 5 9 1-3/4 928 HDC1060 10 60 36 24 48 7-1/2 4 41-3/8 2 5 9 1-3/4 1295 HDC1072 72 42 24 57 7-1/4 4 42-1/2 2 5 9 1-3/4 1616

HDC1548 48 30 30 39 7-1/4 4 47-7/8 2 5 9 1-3/4 1450 HDC1560 15 60 36 30 48 8 4 48 2 5 9 1-3/4 1824 HDC1572 72 42 30 57 8-3/4 4 48-3/4 2 5 9 1-3/4 2227

HDC2060 60 36 30 48 9-1/8 4 52-1/8 2-1/4 6 12 2 2175 HDC2072 20 72 42 30 57 10 4 52-5/16 2-1/4 6 12 2 2625

HDC2560 60 36 34 48 9 4 57-3/4 2-1/2 6 14 2-1/4 2820 HDC2572 25 72 42 34 57 9-3/4 4 58-1/2 2-1/2 6 14 2-1/4 3570

HDC3060 60 36 34 48 9-7/8 4 58-3/4 2-3/4 6 14 2-1/2 3180 HDC3072 30 72 42 34 57 10-5/8 4 59-3/8 2-3/4 6 14 2-1/2 3800

HDC4072 40 72 42 38 57 11 5 68 3-1/4 7 18 3 5350

HDC5084 50 84 48 40 64-1/2 13 6 71-7/8 3-3/4 7 18 3 7470

SPECIFICATIONS

NOTE: E dimension is one-half of maximum coil width.

CENTER OF THE HOIST AND BAIL MUST BE IN-LINE WITH

THE LOAD’S CENTER OF GRAVITY.

W A R N I N G

CSCCLOSE STACKING C-HOOKPRODUCT FEATURES

Recessed counterweight allows for close stacking of coils which maximizes floor space.

Handles a wide range of coil widths. Designed for heavy duty application. High tensile alloy steel plate reduces physical size and weight. Counter balanced to hang level when empty. Inside radius on hooks avoid coil edge contact. Curved coil saddle is standard. Guide handle for ease of hook positioning. Available with optional padding for additional coil protection. Complies with ASME standards.


CO

IL L

IFT

ER

S

& U

PE

ND

ER

S



W A R N I N G

NOTE: E dimension is one-half of maximum coil width.

GUIDEHANDLES

W

D

L

E

T A

C

B

HR

THROAT

*Counterweight extends beyond arm one-half of the counterweight width, in capacities 25 ton and greater.Other sizes available, consult factory.

Dimensions (inches)

Lifting Arm Bail Dimensions Model Capacity Coil Width Length Depth Width HR Opening Thk. Weight Number (tons)

Max. Min. Throat L D W Headroom A B C T (lbs.)

CSC536 36 24 24 30 5-5/16 4 37-1/4 1-1/2 4 7 1-1/4 550 CSC548 5 48 30 24 39 6-1/8 4 38-1/16 1-1/2 4 7 1-1/4 707 CSC560 60 36 24 48 6-15/16 4 38-15/16 1-1/2 4 7 1-1/4 853

CSC7536 36 24 24 30 5-5/8 4 37-1/2 1-1/2 4 7 1-1/2 750 CSC7548 7-1/2 48 30 24 39 6-3/8 4 38-1/4 1-1/2 4 7 1-1/2 996 CSC7560 60 36 24 48 6-15/16 4 39 1-1/2 4 7 1-1/2 1161

CSC1048 48 30 24 39 7-3/16 4 41-1/4 2 5 9 1-3/4 1200 CSC1060 10 60 36 24 48 7-5/8 4 41-1/2 2 5 9 1-3/4 1645 CSC1072 72 42 24 57 7-1/4 4 41-1/8 2 5 9 1-3/4 2100

CSC1548 48 30 30 39 7-1/4 4 47-7/8 2 5 9 1-3/4 2054 CSC1560 15 60 36 30 48 8 4 48 2-1/4 5 9 1-3/4 2410 CSC1572 72 42 30 57 8-3/4 4 48-3/4 2 5 9 1-3/4 2814

CSC2060 60 36 30 48 9-1/8 4 52-1/8 2-1/4 6 12 2 2864 CSC2072

20 72 42 30 57 9-3/4 4 52-1/2 2-1/4 6 12 2 2951

CSC2560* 60 36 34 48 9 4 57-3/4 2-1/2 6 14 2-1/4 3077 CSC2572* 25 72 42 34 57 9-3/4 4 58-3/4 2-1/2 6 14 2-1/4 3570

CSC3060* 60 36 34 48 9-7/8 4 58-3/4 2-3/4 6 14 2-1/2 3480 CSC3072* 30 72 42 34 57 10-5/8 4 59-3/8 2-3/4 6 14 2-1/2 4260

CSC4072* 40 72 42 38 57 11 5 68 3-1/4 7 18 3 6100

SPECIFICATIONS

E

L

D

THROAT

HR

T

NOTE: E dimension is one half of “L” dimension.COIL WIDTHS

SCCSLIT COIL C-HOOK


CO

IL L

IFT

ER

S

& U

PE

ND

ER

S


Dimensions (inches) Coil Lifting Arm Bail Dimensions Model Capacity Width Length Depth Width HR Opening Thk. Weight Number (tons) Max. Throat L D W Headroom

A B C T (lbs.)

SCC536 36 24 36 5-5/16 4 37-1/4 1-1/2 4 7 1-1/4 450 SCC548 5 48 24 48 6-1/8 4 38 1-1/2 4 7 1-1/4 555 SCC560 60 24 60 6-9/16 4 38-9/16 1-1/2 4 7 1-1/4 649

SCC7536 36 24 36 5-5/8 4 37-5/8 1-1/2 4 7 1-1/2 496 SCC7548 7-1/2 48 24 48 6-5/16 4 38-5/16 1-1/2 4 7 1-1/2 731 SCC7560 60 24 60 7-1/8 4 38-7/8 1-1/2 4 7 1-1/2 898

SCC1048 48 24 48 7-3/16 4 41-1/8 2 5 9 1-3/4 932 SCC1060 10 60 24 60 7-5/16 4 41-1/8 2 5 9 1-3/4 1281 SCC1072 72 24 72 7-1/4 4 41-1/8 2 5 9 1-3/4 1570

SCC1548 48 30 48 7-1/4 4 47-7/8 2 5 9 1-3/4 1510 SCC1560 15 60 30 60 8 4 48 2 5 9 1-3/4 1789 SCC1572 72 30 72 8-7/8 4 48-3/4 2 5 9 1-3/4 2120

SCC2060 20 60 30 60 9-1/8 4 52-1/8 2-3/4 6 12 2 2125 SCC2072 72 30 72 9-15/16 4 52-15/16 2-3/4 6 12 2 2485

SCC2560 25 60 34 60 9-1/8 4 57-3/4 3-1/4 6 14 2-1/2 2840 SCC2572 72 34 72 9-3/4 4 58-1/2 3-3/4 6 14 2-1/2 3350


SPECIFICATIONS

PRODUCT FEATURESDesigned for heavy duty applications.

Handles multiple slit coils which maximizes handling efficiency.

Recessed counterweight minimizes interference with equipment or other obstacles.

High tensile alloy steel plate reduces physical size and weight.

Counter balanced to hang level when empty.

Inside radius on hooks avoid coil edge contact.

Curved coil saddle is standard.

Guide handles for ease of hook positioning.

Available with optional padding for additional coil protection.




W A R N I N G

VCLVERTICAL COIL LIFTER


CO

IL L

IFT

ER

S

& U

PE

ND

ER

S

Spacer Blocks Installed for 16-18" coil I.D.'s. See Instruction Manual for details.

ECL EXTENDED WIDTH VERTICAL COIL LIFTERPRODUCT FEATURES

Handles any size coil I.D. from 16" to 24". Lifter legs automatically adjust

to coil I.D. being lifted. Has higher capacity range

than standard lifter. Unique design minimizes dunnage

required between coils. Complies with ASME standards.


Dimensions (inches)

Coil HR Model Capacity Coil I.D. Width Headroom Bail Dimensions Foot Dimensions Weight. Number (tons) Min. Max. W Open Closed A B C T F D J (lbs.)

ECL100024 1/2 16 24 20 36 30-7/8 1-1/4 3 5 5/8 5 1/2 14-1/2 90

ECL2524 2-1/2 16 24 24 44 37-1/2 1-1/2 3 5 3/4 5 3/4 15-1/2 125

ECL524 5 16 24 30 47 40-3/8 2 4 7 1 6 1 15-1/2 170

ECL7524 7-1/2 16 24 30 47 40-3/8 2 4 8 1 6 1 15-1/2 170

SPECIFICATIONS

Dimensions (inches)

Coil Model Capacity Coil I.D. Width HR Bail Dimensions Foot Dimensions Weight Number (tons) Min. Max. W Headroom A B C T F D J (lbs.)

VCL100020 1/2 16 20 20 36 1-1/4 3 5 5/8 4 3/4 13 110

VCL1520 1-1/2 16 20 24 36 1-1/2 3 5 5/8 4 3/4 13 125

VCL320 3 16 20 24 40 1-1/2 3 5 3/4 5 3/4 13-1/2 180

VCL520 5 16 20 30 49 2 4 7 1 6 3/4 14-1/4 195


SPECIFICATIONS

PRODUCT FEATURES Efficient handling of verticallystacked coils.

Leg positioning handle is easy to operate and has a positive locking feature.

Handles any size coil I.D. from 16" to 20".



CO

IL L

IFT

ER

S

& U

PE

ND

ER

S

HCLVERTICAL COIL LIFTER WITH HAND WHEELPRODUCT FEATURES

Handles any size coil I.D. from 16" to 24". Efficient handling of vertically stacked coils. Available with chain wheel drive. Complies with ASME standards.

Dimensions (inches) Coil Model Capacity Coil I.D. Width HR Weight Number (tons) Min. Max. W Headroom A B C T F D J (lbs.)

HCL2524 2-1/2 16 24 20 36 1-1/2 3 5 3/4 5 3/4 15-1/2 250

HCL524 5 16 24 24 41 2 4 7 1 6 1 15-1/2 350

HCL7524 7-1/2 16 24 24 42 2 4 7 1 6 1 15-1/2 425

HCL1024 10 16 24 30 50 2-1/2 5 9 1-1/4 6 1-1/2 15-1/2 500


SPECIFICATIONS

DCOIL I.D.

F


CO

IL L

IFT

ER

S

& U

PE

ND

ER

S

ROTATING BAILCOIL LIFTERPRODUCT FEATURES

Motorized leg drive maximizes the efficient handling of coils. Leg drive speed: 2.8" per second. Narrow aisle stacking maximizes coil storage floor space. Curved lifting pads for coil protection. High impact plastic toe rollers prevent lifter foot contact. Anti-clamp limit switch protects coil

during closing of lifter. Heavy duty torque limiting drive protection

during maximum open/closed conditions. Lockout limit switch prevents inadvertent

leg opening during lift. Alloy steel pin bail. Easily replaceable slide wear guides. Design allows for easy maintenance

access to drive components. Designed to operate on AC power supply. Motorized 350° rotation at approximately 2 RPM. Complies with ASME standards.

FIXED BAIL COIL LIFTER PRODUCT FEATURES

Motorized leg drive maximizes the efficient handling of coils. Leg drive speed: 2.8" per second. Narrow aisle stacking maximizes coil storage floor space. Curved lifting pads for coil protection. High impact plastic toe rollers prevent lifter foot contact. Anti-clamp limit switch protects coil during closing of lifter. Heavy duty torque limiting drive protection

during maximum open/closed conditions. Lockout limit switch prevents inadvertent

leg opening during lift. Alloy steel pin bail. Easily replaceable slide wear guides. Design allows for easy maintenance

access to drive components. Designed to operate on AC power supply. Field upgradeable to rotating style. Complies with ASME standards.


CO

IL L

IFT

ER

S

& U

PE

ND

ER

S


ROTATING BAILFEATURES & OPTIONS

STANDARDALLOY STEEL LIFTING PINKeeps headroom to a minimum.

STANDARDENCLOSED DRIVEProtects drive from impact yet still provides easy access for maintenance.

OPTIONAL MOTORIZED BAIL ROTATIONAllows for independent and precisepositioning of the load or the lifter.

OPTIONAL BUILT IN LOAD SCALEWith digital readouts for precise coil weight.

OPTIONAL URETHANE PADDINGUrethane coil edge protection attached to legs, feet, or both.

OPTIONAL I.D. PHOTO-ELECTRIC SENSORPhoto-electric sensor indicates lifter foot alignment with coil I.D.

OPTIONAL INDICATOR LIGHTSVisual indicator for various functions.

OPTIONAL SEVERE DUTY DRIVE PACKAGEFor high cycle operations.

OPTIONAL PARKING & MAINTENANCE STANDSProvides storage for lifter when not in use and easy access for normal inspection & maintenance. See page 38.

STANDARDLOCKOUT LIMIT SWITCHPrevents inadvertent leg opening during lift.

STANDARDANTI-CLAMP & TOE ROLLERSProtects sides of coil from lifter damage.

37

CO

IL L

IFT

ER

S

& U

PE

ND

ER

S

HTC TELESCOPIC COIL LIFTERWITH HAND WHEELPRODUCT FEATURES:

Chain wheel provides easy manual operation. Two-sided coil lifter requires less aisle space. Curved lifting pad minimizes coil damage. Self locking worm gear prevents legs from inadvertent opening.

Available with hand wheel leg drive option. Available with motorized leg drive option. Complies with ASME standards.


Coil Bail Foot Model Capacity Width HR Weight

Number (tons) Min. Max. Throat Headroom A B C T D F (lbs.)

HTC548 5

16 48 28 52 2 4 7 1 4-1/2

4

485 HTC560 20 60 26 50 2 4 7 1 590

HTC1048 10

16 48 32 63 2 4 7 1-1/4 5-1/2

4

725 HTC1060 20 60 30 61 2 4 7 1-1/4 810

HTC1560 15

20 60 34 69 2-1/2 5 9 1-1/2 6-1/2

4

930 HTC1572 24 72 32 67 2-1/2 5 9 1-1/2 1075

Dimensions (inches)


C

HR

BT

THROAT

MAX.MIN.

DF

24"

SPECIFICATIONS

Dimensions (inches) Coil Model Capacity Width HR Bail Foot Weight Number (tons) Min. Max. Throat Headroom A B C T D F L (lbs.)

NCL1048 10 20 48 24 58 2 4 7 1-1/4 3-1/4 4 7 210

NCL1548 15 20 48 28 66 2-1/2 5 9 1-1/2 3-1/2 4 7 352

NCL2060 20 24 60 30 82 2-1/2 5 9 1-1/2 3-5/16 4 6 760

NCL2560 25 24 60 32 94 2-3/4 6 12 2-1/4 4-3/4 4 8 1235

NCL3072 30 24 72 26 83 3-1/2 7 16 2-1/4 4-3/4 4 8 1170


SPECIFICATIONS

NCL NARROW AISLE COIL LIFTERPRODUCT FEATURES:

Most economical of the two-sided coil lifters. Two-sided coil lifter requires less aisle space. Lifting hook width adjustment pin is easy to use. Hooks manufactured from high tensile alloy steel. Coil width adjustment indicators for easy

hook placement. Optional coil protection available. Complies with ASME standards.

DL

HR

T

C

BA

MIN.MAX.

THROAT

F


PRODUCT FEATURES: Individually designed for your lifter's size and capacity. Heavy duty tubular construction. Minimizes lifter storage space requirements. Stabilizes lifter for personnel safety. Allows for easy access to lifter. Allows for easy inspection of lifter. Minimizes time required to engage lifter with crane hook.


PARKING STANDS FOR COIL LIFTERS

CO

IL L

IFT

ER

S

& U

PE

ND

ER

S

Used to store all C-Hook type lifters(Models: HDC, SCC, CSC).

For storage of two sided coil lifters(Models: HTC and NCL).

For storage and maintenance of two sided lifters.Personnel platforms provide ease of access

to drive system for maintenance and inspectionof motorized units.

39

HDCUHEAVY DUTY COIL UPENDER


CO

IL L

IFT

ER

S

& U

PE

ND

ER

S

Model Capacity Weight Number (tons) A B C D E F G (lbs.)

HDCU136 1 36 36 24* 60 48 36 51 1500

HDCU236 2 36 36 24* 60 48 36 51 1600

HDCU342 3 42 42 24* 66 56 42 60 2000

HDCU442 4 42 42 24* 66 56 42 60 2200

HDCU548 5 48 48 30 78 61 48 66 2750

HDCU7548 7-1/2 48 48 30 78 61 48 66 2900

HDCU1054 10 54 54 30 84 60 55 74 3700

HDCU12554 12-1/2 54 54 36 90 69 55 74 4000

HDCU1560 15 60 60 36 96 73 60 80 4500

HDCU2060 20 60 60 36 96 73 60 80 6200

HDCU2572 25 72 72 43 115 88 72 96 10000

HDCU3072 30 72 72 48 120 88 72 96 12000

* Platform over 42” x 42” will have height of 30”. Pallets must not extend over platform sides. Other sizes available, consult factory.

Dimensions (inches)

NOTE: If load is not a coil, specify center of gravity of load being rotated.

SHOWN WITH V-BLOCK OPTION

SPECIFICATIONS

PRODUCT FEATURES Fast and convenient way to upend coils to 90°. Heavy duty disc brake will stop load in any position. Reversing magnetic starter with 115 volt pendant control. Stop travel/over travel limit switches.

PRODUCT OPTIONS Larger platforms available. V-Block, either standard or urethane faced. 180° horizontal rotation which permits loading, and unloading from same side.

Fork lift truck pick-up pockets.

OVERALL HEIGHT:A+C=D

CM CADY BELOW THE HOOK LIFTERS40 CM CADY BELOW THE HOOK LIFTERS

CO

IL L

IFT

ER

S

& U

PE

ND

ER

S

LPULOW PLATFORM COIL UPENDERPRODUCT FEATURES:

Lower platform design offers easier access by operator. Fast and convenient way to upend coils to 90°. Requires less platform height. Magnetic starter with 115 volt pendant control. Double acting hydraulic cylinders. Relief valve prevents over-capacity rotation. Stop limit switches at each end of rotation.

PRODUCT OPTIONS: Larger platforms available. Unequal platform sizes available. V-Block, either standard or urethane faced. 180° horizontal rotation, which permits loading and unloading from same side.

A

C

A

E

B

Pallets must not extend over platform sides. Other sizes available, consult factory.

Dimensions (inches)

Model Capacity Weight Number (tons) A B C D E (lbs.)

LPU100036 1/2 36 36 8-1/4 44-1/4 78 1500

LPU136 1 36 36 9-1/4 45-1/4 78 1600

LPU1536 1-1/2 36 36 10-1/4 46-1/4 78 1800

LPU236 2 36 36 12-1/4 48-1/4 78 2000

LPU2542 2-1/2 42 42 13-1/4 55-1/4 90 2200

LPU342 3 42 42 14-1/4 56-1/4 90 2300

LPU3542 3-1/2 42 42 15-1/4 57-1/4 90 2400

LPU442 4 42 42 17-3/8 59-3/8 90 2600

LPU4548 4-1/2 48 48 18-3/8 66-3/8 102 2800

LPU548 5 48 48 19-3/8 67-3/8 102 3000

LPU648 6 48 48 20-3/8 68-3/8 102 3600

LPU7548 7-1/2 48 48 20-3/8 68-3/8 102 5000

SHOWN WITH V-BLOCK OPTION

OVERALL HEIGHT:A+C=D

SPECIFICATIONS

NOTE: If load is not a coil, specify center of gravity of load being rotated.

CM CADY BELOW THE HOOK LIFTERS42 CM CADY BELOW THE HOOK LIFTERS Products highlighted red ship in 10 to 14 business days.))QUICKSHIP

SH

EE

TLIF

TE

RS

SPECIFICATIONS

PLPLATE LIFTERThe Plate Lifter provides a quick and easy solution for handling thick plates, one at a time. Simply position thePlate Lifter over your load, check to see that the hooks are engaged and lift.

PRODUCT FEATURES Rugged-chain rigging. Heavy duty plate hooks. Design allows for easier crane alignment. Steel spreader stabilizes two hooks. Complies with ASME standards.

Model Rated Dimensions (inches) Max. Plate WeightNumber Capacity (tons) A B C D E F HR Width (in.) (lbs.)

PL5 5 1 3.5 6 3 2.3 84 58 96 185

PL10 10 1.25 4.38 7.5 5 3.8 84 58 96 320

* Headroom at maximum plate width.

HSLHEAVY DUTY SHEET LIFTER


SH

EE

TLIF

TE

RS

Dimensions (inches)

Model Capacity Bundle Width HR Shoe Min. Bail Opening Weight Number (tons) Min. Max. Headroom D Aisle A B C T (lbs.)

HSL348 16 48 920 HSL360 3 16 60 28 2.63 9 1.5 3 5 .75 950 HSL372 16 72 980

HSL548 16 48 1125 HSL560 16 60 1170 HSL572 5 16 72 29 2.63 9 2 4 6 1 1220 HSL584 16 84 1270 HSL596 16 96 1550

HSL1048 16 48 1510 HSL1060 16 60 1570 HSL1072 10 16 72 30 3.5 11 2 4 7 1.5 1640 HSL1084 16 84 1700 HSL1096 16 96 1770

HSL1548 16 48 1570 HSL1560 16 60 1640 HSL1572 15 16 72 32 3.5 12 2.5 5 9 1.5 1700 HSL1584 38 84 1960 HSL1596 38 96 2030

C

A

B T


SPECIFICATIONS

Bail Opening

PRODUCT FEATURES Versatile handling of bundles, sheets,

plates and other materials stacked horizontally. Low headroom design for optimum lifting capabilities. One person operation minimizes handling cost. Self-locking worm gear drive for leg adjustment is standard. Easy adjustment for different sheet widths. Rack and pinion leg drive. Designed for ease of maintenance. Designed for greater sheet width range. Complies with ASME standards.

PRODUCT OPTIONS Hand wheel lockout. Motorized leg adjustment. Chain-wheel leg adjustment. Extended length hand wheel leg adjustment. End chains with plate hooks (recommended

for all widths 72" and greater). Extended grab shoe lengths available. Additional bundle clearance available (longer legs).

DO NOT LIFT LOOSELY BUNDLED, THIN OR OILY SHEETS

W A R N I N G


PRODUCT FEATURES Standard light duty unit for handling smaller size sheets and bundles.

Size and versatility allows for handling of crates, bins and other smaller size containers.

Side oriented extended length hand wheel adjustment standard.

Self locking worm gear leg drive system. Complies with ASME standards.


SBSL SMALL BUNDLE SHEET LIFTER

PRODUCT FEATURES Lightweight. Channel steel construction. 84" grab shoe length. Complies with ASME standards.

SSL STANDARD DUTY SHEET LIFTER


SH

EE

TLIF

TE

RS

Model Capacity Bundle Width Min. HR Weight Number (tons) Min. Max. Aisle A B C Headroom (lbs.)

SBSL1536 1-1/2 12 36 512 SBSL1548 1-1/2 16 48 525 SBSL348 3 16 48 670 SBSL360 3 20 60 736 SBSL548 5 16 48 750 SBSL560 5 20 60 763

Dimensions (inches)

8

8

8

1-1/2 3 8 42

1-1/2 5 8 44

2 7 8 52

SPECIFICATIONS

A

C

B T


Model Capacity Bundle Width HR Shoe Min. Bail Opening Weight Number (tons) Min. Max. Headroom D Aisle A B C T (lbs.)

SSL236 15 36 510 SSL248 2 20 48 29 2-1/2 8 1-1/2 3 5 3/4 560 SSL260 24 60 630 SSL548 20 48 670 SSL560 5 24 60 32 2-5/8 8 2 4 6 1 750 SSL572 30 72 830 SSL7548 20 48 840 SSL7560 7-1/2 24 60 34 2-1/2 10 2 4 6 1 900 SSL7572 30 72 980

SPECIFICATIONS

BAIL OPENING

Dimensions (inches)


W A R N I N G


W A R N I N G


PRODUCT FEATURES Once the bail pin is set the pallet lifter remains balanced whether full or empty to make the job faster and safer.

Adjustable bail provides for balanced handling of items with different load centers.

Adjustable throat allows for the correct handling of higher stacked loads.

Adjustable forks allow for proper placement of the forks spread.

The auto return bail automatically levels empty pallet lifter saving time and effort.

Heavy duty construction for years of trouble free service. Complies with ASME standards.

Use your crane to handle a wide range of loads.

CM CADY BELOW THE HOOK LIFTERS )) IN-STOCK Products highlighted green ship in 3 to 5 days.

PA

LLE

TLIF

TE

RS

K J

G

F

HE

BAIL

C

A B T

Rated Fork Bail Throat Model Capacity H J Number (tons) E F G Min. Max. A B C T Min. Mid Max.

ALL2 2 43.00 2.00 4.00 17.50 36.00 .88 3.00 5.00 0.75 40.68 52.68 64.18

Weight (lbs.)

515

SPECIFICATIONS

HR Headroom HR Headroom HR Headroom (at min. throat) (at mid throat) (at max. throat)

K K K Min. Max. Min. Max. Min. Max.

54.88 60.68 66.63 72.44 78.38 84.18

Dimensions (in.)

CLOSE-UP OF ADJUSTABLE FORK

BAIL STOP PIN

ALL ADJUSTABLE LOAD LIFTER

47

WPL WHEELED PALLET LIFTERPRODUCT FEATURES

Wheels allow for movement of unit without crane. Dual lift points eliminates need for counterweight. Extremely lightweight for ease of handling. Complies with ASME standards.

LPL LIGHTWEIGHT PALLET LIFTERPRODUCT FEATURES

Dual lift points eliminates need for counterweight. Extremely lightweight for ease of handling. Maintenance free — no moving parts. Complies with ASME standards.

Products highlighted red ship in 10 to 14 business days.))QUICKSHIP CM CADY BELOW THE HOOK LIFTERS

PA

LLE

TLIF

TE

RS

LN

W

M

J

HR

A B x C

E

WL

J

HR

M N

A B x C

E

Dimensions (inches) Model Capacity Forks Bail Weight Number (tons) L M N W E A B C J HR (lbs.)

LPL148 1 36 2 2 25 24 1/2 2-1/2 3-3/4 48 58 245

LPL248 2 36 4 2 25 24 3/4 2-3/4 4-1/2 48 62 425

LPL348 3 36 4-1/2 2-1/2 27 24 1 3-1/2 5 48 65 610

Dimensions (inches) Model Capacity Forks Bail Weight Number (tons) L M N W E A B C J HR (lbs.)

WPL148 1 36 2 2 25 24 1/2 2-1/2 3-3/4 48 60 245

WPL248 2 36 4 2 25 24 3/4 2-3/4 4-1/2 48 62 405

SPECIFICATIONS

SPECIFICATIONS


PRODUCT FEATURES:Converts overhead crane to lift truck.Counter balanced to hang level when empty.Maintenance free.Allows for ease of loading/unloading in not easily accessible areas.Complies with ASME standards.


FPL STANDARD FIXED FORKS PALLET LIFTER

PRODUCT FEATURES:Double frame design for heavy capacities.Counter balanced to hang level when empty.Maintenance free.Complies with ASME standards.

HPL HEAVY DUTY FIXED FORKS PALLET LIFTER


PA

LLE

TLIF

TE

RS

E

B x C

N LW

M

A

HR

J

Dimensions (inches)

Model Capacity Forks Bail Weight Number (tons) L M N W E A B C J* HR (lbs.)

FPL136 1 36 2 2 25 18 1 6 5 48 57-1/2 292

FPL142 1 42 2 2 25 21 1 6 5 48 57-1/2 310

FPL148 1 48 2 2 25 24 1 6 5 48 58-1/2 371

FPL1536 1-1/2 36 3 2 25 18 1 6 5 48 58-1/2 388

FPL1542 1-1/2 42 3 2 25 21 1 6 5 48 58-1/2 432

FPL1548 1-1/2 48 3 2 25 24 1 6 5 48 58-1/2 459

FPL236 2 36 3 2 25 18 1 6 5 48 59-1/2 448

FPL242 2 42 4 2 25 21 1 6 5 48 59-1/2 536

FPL248 2 48 4 2 25 24 1 6 5 48 59-1/2 627

FPL342 3 42 4-1/2 2-1/2 25 21 1-1/2 6-1/8 7 48 61-1/2 766

FPL348 3 48 4-1/2 2-1/2 27 24 1-1/2 6-1/8 7 48 61-1/2 823

FPL354 3 54 4-1/2 2-1/2 30 27 1-1/2 6-1/8 7 48 61-1/2 969

FPL448 4 48 5 3 27 24 1-1/2 6-1/8 7 48 63-1/2 1176

FPL460 4 60 5 3 30 30 1-1/2 6-1/8 7 60 75-1/2 1393

FPL548 5 48 5 3 30 24 1-1/2 6-1/8 7 48 63-1/2 1193

FPL560 5 60 4-1/2 2-1/2 38 30 1-1/2 8-1/8 7 60 75-1/2 1403

SPECIFICATIONS

L

N

W

M

HR

AB x C

J E

Dimensions (inches) Model Capacity Forks Bail Weight Number (tons) L M N W E A B C J* HR (lbs.)

HPL7548 7-1/2 48 6 2-1/2 30 24 2 5 9 48 65 1910

HPL7560 7-1/2 60 10 3 38 30 2 5 9 60 79 2400

HPL1048 10 48 10 3 30 24 2 5 9 48 69 1950

HPL1060 10 60 10 3 38 30 2 5 9 60 81 3100

HPL1548 15 48 10 3 38 24 2 6 12 60 84 2250

HPL1560 15 60 10 3 38 30 2 6 12 60 75 3800

HPL2060 20 60 7 4 38 30 2-1/4 6 12 60 88 4300

HPL2072 20 72 8-1/4 4 44 36 2-1/4 6 12 60 88 4850

SPECIFICATIONS

* We recommend an additional 3"-4" clearance above the load for ease of loading and unloading the lifter.



W A R N I N G


49CM CADY BELOW THE HOOK LIFTERS

APL STANDARD ADJUSTABLEFORKS PALLET LIFTERPRODUCT FEATURES:

Converts overhead crane into lift truck. Pry bar adjustable forks to handle multiple pallet sizes. Counter balanced to hang level when empty. Complies with ASME standards.

HAPL HEAVY DUTY ADJUSTABLEFORKS PALLET LIFTERPRODUCT FEATURES:

Forged forks gives ease of adjustment. Smaller fork sizes gained using forged forks. Double frame design for heavy capacities. Complies with ASME standards.

PA

LLE

TLIF

TE

RS



W A R N I N G

LW

M N

B x CA

J

HR

E

Dimensions (inches) Model Capacity Forks W Bail Weight Number (tons) L M N Min. Max. E A B C J* HR (lbs.)

APL136 1 36 2 2 16 38 18 1 3 5 48 58 670

APL142 1 42 2 2 16 38 21 1 3 5 48 58 760

APL148 1 48 2 2 16 38 24 1 3 5 48 59 780

APL1536 1-1/2 36 3 2 16 38 18 1 3 5 48 59 845

APL1542 1-1/2 42 3 2 16 38 21 1 3 5 48 59 900

APL1548 1-1/2 48 3 2 16 38 24 1 3 5 48 60 950

APL236 2 36 3 2 16 38 18 1 3 5 48 60 980

APL242 2 42 4 2 16 38 21 1 3 5 48 60 1060

APL248 2 48 4 2 16 38 24 1 3 5 48 59-1/2 1080

APL342 3 42 4-1/2 2-1/2 16 38 21 1-1/2 4 7 48 61-1/2 1250

APL348 3 48 4-1/2 2-1/2 16 38 24 1-1/2 4 7 48 61-1/2 1368

APL354 3 54 4-1/2 2-1/2 16 38 27 1-1/2 4 7 48 63 2005

APL448 4 48 5 3 19 38 24 1-1/2 4 7 48 64 1600

APL460 4 60 5 3 19 38 30 1-1/2 4 7 60 76 2240

APL548 5 48 5 3 19 38 24 1-1/2 4 7 48 65 1865

APL560 5 60 4-1/2 2-1/2 19 38 30 1-1/2 4 7 60 77 2190

SPECIFICATIONS


W LN

M

EHR

J

AB x C

Dimensions (inches)

Model Capacity Forks W Bail Weight Number (tons) L M N Min. Max. E A B C J* HR (lbs.)

HAPL7548 7-1/2 48 6 2-1/2 20 48 24 2 5 9 48 64-1/2 2400

HAPL7560 7-1/2 60 6 3 20 48 30 2 5 9 60 77-1/2 3300

HAPL7572 7-1/2 72 6 3 20 48 36 2 5 9 60 80 3750

HAPL1048 10 48 6 3 20 48 24 2 5 9 48 68 2900

HAPL1060 10 60 6 3 20 48 30 2 5 9 60 79-1/2 4300

HAPL1072 10 72 7 3 20 48 36 2 5 9 60 79-1/2 4900

HAPL12548 12-1/2 48 6 3 20 48 24 2 6 12 48 82 3900

HAPL12560 12-1/2 60 6 3 20 42 30 2 6 12 60 82 4700

HAPL12572 12-1/2 72 7 3-1/2 20 38 36 2 6 12 60 82 5500

SPECIFICATIONS



PA

LLE

TLIF

TE

RS

HWPL HAND WHEEL ADJUSTABLE FORKS PALLET LIFTER

HHWPL HEAVY DUTY HAND WHEEL ADJUSTABLE FORKS PALLET LIFTERPRODUCT FEATURES

Hand wheel adjustable forks for ease of adjustment. Forged forks allow for smaller fork sizes. Double frame design for heavy capacities. Complies with ASME standards.

PRODUCT FEATURES Hand wheel adjustable forks for ease of adjustment. Converts overhead crane to lift truck. Handles multiple pallet sizes. Complies with ASME standards. L

W

MN

J

HR

B x CA

E

Dimensions (inches) Model Capacity Forks W Bail Weight Number (tons) L M N Min. Max. E A B C J* HR (lbs.)

HWPL136 1 36 2 2 16 38 18 1 3 5 48 58 890

HWPL142 1 42 2 2 16 38 21 1 3 5 48 58-1/2 800

HWPL148 1 48 2 2 16 38 24 1 3 5 48 58-1/2 1051

HWPL1536 1-1/2 36 3 2 22-1/2 38 18 1 3 5 48 58 1000

HWPL1542 1-1/2 42 3 2 22-1/2 38 21 1 3 5 48 60 1055

HWPL1548 1-1/2 48 3 2 22-1/2 38 24 1 3 5 48 60 1130

HWPL236 2 36 3 2 22-1/2 38 18 1 3 5 48 60 1105

HWPL242 2 42 4 2 23 38 21 1 3 5 48 60 1351

HWPL248 2 48 4 2 24 38 24 1 3 5 48 59-1/2 1360

HWPL342 3 42 5 2 23 38 21 1-1/2 4 7 48 61-1/2 1465

HWPL348 3 48 4-1/2 2-1/2 24 38 24 1-1/2 4 7 48 63-1/2 1600

HWPL354 3 54 4-1/2 2-1/2 24 38 27 1-1/2 4 7 48 63 2130

HWPL448 4 48 5 3 28-1/2 38 24 1-1/2 4 7 48 62-1/2 2035

HWPL460 4 60 5 3 28-1/2 38 30 1-1/2 4 7 60 76 2385

HWPL548 5 48 5 3 25-1/2 38 24 1-1/2 4 7 48 65 2550

HWPL560 5 60 4-1/2 2-1/2 25-1/2 38 30 1-1/2 4 7 60 79 2740

SPECIFICATIONS


NL

E

WM

JHR

AB x C

Dimensions (inches)

Model Capacity Forks W Bail Weight

Number (tons) L M N Min. Max. E A B C J* HR (lbs.)

HHWPL7548 7-1/2 48 6 2-1/2 20 48 24 2 5 9 48 66 2600

HHWPL7560 7-1/2 60 6 3 20 48 30 2 5 9 60 77-1/2 3500

HHWPL7572 7-1/2 72 6 3 20 48 36 2 5 9 60 80 3950

HHWPL1048 10 48 6 3 20 48 24 2 5 9 48 65-1/2 3150

HHWPL1060 10 60 6 3 20 48 30 2 5 9 60 77-1/2 3850

HHWPL1072 10 72 7 3 20 48 36 2 5 9 60 82 4250

HHWPL12548 12-1/2 48 6 3 20 48 24 2 6 12 48 82 4200

HHWPL12560 12-1/2 60 6 3 20 48 30 2 6 12 60 82 4950

HHWPL12572 12-1/2 72 7 3-1/2 20 48 36 2 6 12 60 82 5750

HHWPL1560 15 60 7 3-1/2 20 48 30 2 6 12 60 82 5300

HHWPL1572 15 72 8 3-1/2 20 48 36 2 6 12 60 82-1/2 6400

SPECIFICATIONS




W A R N I N G

CM CADY BELOW THE HOOK LIFTERS52 CM CADY BELOW THE HOOK LIFTERS

LIFTIN

GTO

NG

S

OVERVIEWOF LIFTING TONGS

This Dual Gripping Tong system will support and stabilize longer, larger loadsthat can sustain the force of the entire loadon a smaller surface area. When the narrowgripping arms engage the item, significantpressure will be applied. Ideal for handlingbundles of steel that are round in shape.

CUSTOM FRICTION TONGS

The Single Gripping Tong is used to liftcylindrical objects that are short in lengthsuch as large diameter round bar, tube or rollsof material.

We have integrated both a manual latch orthe Auto-Latch mechanism into this family oftongs. The selection of the latch is dependanton the application.

The Dual Gripping Tong system supports and stabilizes longer, larger loads. The large contoured pads distributethe force applied to the load over a largersurface area. Optional pad linings, nylon or rubber pads protect the load from damage. This is ideal when handling rolls of fabric or polyethylene film.

APPLICATION IDEAS FOR CUSTOM FRICTION TONGSTO LIFT ROLLS, TUBES AND CYLINDRICAL MATERIALS

PIPE TONGS

CM Cady Lifting Tongs are available in standard configurations to fit many common applications. However, not all lifting challenges will be solved with a standard tong. CM Cady has the experienced team that can create a custom designed lifting tong to fit the specifications provided. All custom CM Cady Lifting tongs are designed to comply with ASME standards.

FRICTION TONGSGrab arms conform to load surface with outside diameter supported below center of load for additional holding advantage. Designed to lift such products as rolls, tubes, and other cylindrical materials.

INDENTATION TONGSGrab arms grip vertical sides of straight sided materials. Custom grip pads are required to have sufficient coefficient of friction between material lifted andgrip pads. Grip pads may be rubber, steel, belting, points and other. Designed to lift such products as bales, boxes, ingots, and other straight sided materials.

SUPPORTING TONGSGrab arms have feet to support underneath load. Designed to handle constantsizes of material to maintain a horizontal plane on the lifting feet. Dunnage undermaterial required to insert/remove feet of tong. Designed to lift constant sizedboxes, containers, crates, and other constant sized square shaped material.

53

BLT BALE LIFTING TONGSSTANDARD INDENTATION TYPEPRODUCT FEATURES

Lifts bales of paper, cotton, and other materials.

Wide gripping surface for load stability. Includes Auto-Latch mechanism

for one person operation. Complies with ASME standards

Products highlighted red ship in 10 to 14 business days.))QUICKSHIP CM CADY BELOW THE HOOK LIFTERS

LIFT

ING

TO

NG

S

APPLICATION IDEAS FOR INDENTATION TONGSTO LIFT BALES, BOXES, INGOTS & OTHER STRAIGHT-SIDED MATERIALS

Pressure Tongs can be used to lift objectsthat have sufficient structure and densitythat they will not be damaged by the application of significant lateral force. An example of this is lifting concrete highway barriers and steel ingots by using Barrier Tongs.They can also be used in situations where the lifted item can accommodate a gripping action that may indent the sides of the load. Cotton and cardboardbales are a good example of loads that can be lifted with a Pressure Tongeven though they are not rigid.

Model Rated Capacity Bail Width Unit Height Pad Dimensions (in.) Weight Number (tons) (in.) Loaded (in.) Width Height (lbs.)

BLT100036 1/2 36 52 18 9 280

BLT100048 1/2 48 56 18 9 300

BLT136 1 36 52 18 9 280

BLT148 1 48 56 18 9 300

SPECIFICATIONS


PRODUCT FEATURESBroad capacity range.

Low headroom design.

Painted safety red.



DT DIE LIFTING TONGSSTANDARD SUPPORT TYPE


LIFTIN

GTO

NG

S

Dimensions (inches) Model Capacity Max. Weight Number (lbs.) A B C D E F G H (lbs.)

DT120 2000 20 29 3/4 29 4 5/8 1 8 7 29

DT12528 2500 28 40 1/4 39 5 3/4 1 1/4 8 9 1/2 52

DT1538 3000 38 51 3/4 47 1/2 6 7/8 1 1/2 10 10 3/4 86

SPECIFICATIONS

SUPPORT TONGS are used for constant sizedcontainers. It has an arm design that allows significantheight on the lifted item and includes an Auto-Latch mechanism for single person control. This Auto-Latch allows the operator to position, engage, lift, move, placeand disengage the lifted item without assistance from another individual or without moving from the crane/hoistcontrol station.Support Tongs are also available with the Auto-Latch and added length to handle longer loads. The top guide stopssimplify the auto-engagement and single operator use.

APPLICATION IDEAS FOR SUPPORTING TONGSTO LIFT CONSTANT SIZED BOXES, CONTAINERS AND CRATES


AP

PLIC

AT

ION

EVA

LU

AT

ION

Contact: ______________________________________________

Company:_____________________________________________

Address: ______________________________________________

City, State, Zip: ________________________________________

Phone:________________________________________________

Fax: __________________________________________________

Email:_________________________________________________

For a price quote on your specific application,please complete this above form

and fax to 1(716) 689.5644or you can complete this form online at

www.cmworks.com/cady

LOAD INFORMATION

Briefly describe load:

Maximum weight:

Number of pickup points:

Distance between (spacing) pickup points:

Is load center of gravity centered between outer pick points? Yes No

If no, specify location in reference to pick points (attach a diagram if necessary):

What type of attachment to the load?

Shackles Swivel Hooks Lifting Slings Other (specify)

Describe specific requirements:

CRANE INFORMATION

Approximate distance between load and crane:

Single crane hoist information

Capacity:

Measurement Tolerances+0 = Measurement should be no larger but can be smaller than actual.-0 = Measurement should be no smaller but can be larger than actual.+/- = Measurement can be larger or smaller than actual.

INCHES

A ________+0

B ________+0

C ________+0

D ________-0

E ________-0

F ________+/-

G ________-0

H ________-0

CRANE HOOK DATA

Dual crane hoist information

Distance between:

Same capacity? Yes No

If no, specify capacities:


AP

PLIC

AT

ION

EVA

LU

AT

ION




Contact: ______________________________________________

Company:_____________________________________________

Address: ______________________________________________

City, State, Zip: ________________________________________

Phone:________________________________________________

Fax: __________________________________________________

Email:_________________________________________________

Please specify the desired model number:

ROLL INFORMATION:

Minimum: Length Diameter Weight

Maximum: Length Diameter Weight

SHAFT / I.D. INFORMATION:

Minimum: Length Diameter

Maximum: Length Diameter

Any clearance requirements: i.e., headroom, machinery obstructions, etc.

J-HOOK INFORMATION

Is shaft turning when roll is lifted: Yes No

Hook style: Pivoting Fixed

POWER REQUIREMENTS (FOR MOTORIZED UNITS)

DC AC Voltage Phase Cycle

Additional application information or option requirements:

SHAFT / I.D. DIA.

THROAT

MAX. ROLL DIA.

MIN./MAX. ROLL LENGTH


AP

PLIC

AT

ION

EVA

LU

AT

ION

Contact: ____________________________________________

Company: __________________________________________

Address:____________________________________________

City, State, Zip: ______________________________________

Phone: _____________________________________________

Fax: ________________________________________________

Email: ______________________________________________




Specify type of lifter desired:

COIL INFORMATION:

Minimum: O.D. I.D. Width/Height Weight

Maximum: O.D. I.D. Width/Height Weight

In which position will coil be handled? Eye Vertical Eye Horizontal

Describe coil material: Steel Aluminum Brass/Copper

Describe coil material Other, describe:

Describe characteristics of coil (ex. tightly wound, banded, telescoped, oily, hot, etc.):

Describe where coil is resting and where it will be placed (ex. on a flat surface, pallet, turnstile arm, etc.):

Do the coils need to be protected from damage? Yes, describe: No

ADDITIONAL INFORMATION:

Are reversing motor controls required? No Yes If yes, Furnished Loose Mounted On Lifter

CMAA Crane Duty Class (A, B, C, D, E, F):

Please use the space provided below for additional application information or lifter options required (ex: headroom

limitations, clearances where load is picked up and placed, etc.):

Measurement Tolerances+0 = Measurement should be no larger but can be smallerthan actual.-0 = Measurement should be no smaller but can be largerthan actual.+/- = Measurement can be larger or smaller than actual.

INCHES

A ________+0

B ________+0

C ________+0

D ________-0

E ________-0

F ________+/-

G ________-0

H ________-0

CRANE HOOK DATA:


AP

PLIC

AT

ION

EVA

LU

AT

ION

Contact: ____________________________________________

Company: __________________________________________

Address:____________________________________________

City, State, Zip: ______________________________________

Phone: _____________________________________________

Fax: ________________________________________________

Email: ______________________________________________




BUNDLE INFORMATION:

Bundle Dimensions:

Minimum: Length Width Height Weight

Maximum: Length Width Height Weight

Specify material being lifted:

Is the bundle palletized? Yes No If yes, specify pallet size:

Sheet Condition: Dry Oily Banded Loose

ADDITIONAL INFORMATION:

Please provide the model and/or serial number if this is to replace an existing CM Cady lifter:

Operation Required Motorized Manual

If motorized, please specify DC AC Voltage Phase Cycle

Pendant Required Yes No

Should the controls be shipped loose for field mounting? Yes No

Please provide duty cycle of lifter (lifts per hour and hours per day used):

Please provide Crane Classification (A, B, C, D, E, F):

Please use the space below to provide additional application information or options required.

For example: headroom issues, space restrictions, lifter restrictions or options such as a chainwheel or end chains.

Measurement Tolerances+0 = Measurement should be no larger but can be smallerthan actual.-0 = Measurement should be no smaller but can be largerthan actual.+/- = Measurement can be larger or smaller than actual.

INCHES

A ________+0

B ________+0

C ________+0

D ________-0

E ________-0

F ________+/-

G ________-0

H ________-0

CRANE HOOK DATA:


AP

PLIC

AT

ION

EVA

LU

AT

ION

Contact: ____________________________________________

Company: __________________________________________

Address:____________________________________________

City, State, Zip: ______________________________________

Phone: _____________________________________________

Fax: ________________________________________________

Email: ______________________________________________




LOAD INFORMATION - FRICTION TONGS

Minimum: O.D. I.D. Height Weight

Maximum: O.D. I.D. Height Weight

Describe product/material being lifted:

Please describe how product is resting (Ex. On a flat surface, in a rack, etc.):

LOAD INFORMATION - INDENTATION/SUPPORTING TONGS

Minimum: Width Length Height Weight

Maximum: Width Length Height Weight

Describe product/material being lifted:

Will the tongs lift making contact to the width or length side?

ADDITIONAL INFORMATION - ALL TYPES

Does the load need to be protected from lifter damage? Yes No

Is an Auto-Latch desired?

Please provide duty cycle of lifter (lifts per hour and hours per day used):

Please provide Crane Classification (A, B, C, D, E, F):

Please use the space below to provide additional application information or options required. For example: headroom issues and space or lifter restrictions.

Measurement Tolerances+0 = Measurement should be no larger but can be smaller than actual.-0 = Measurement should be no smaller but can be larger than actual.+/- = Measurement can be larger or smaller than actual.

INCHES

A ________+0

B ________+0

C ________+0

D ________-0

E ________-0

F ________+/-

G ________-0

H ________-0

CRANE HOOK DATA:

61CM CADY BELOW THE HOOK LIFTERS

Below-The-Hook Lifters by CM Cady have been designed for specific tasks to withstand the particular forces imposed. Guidelines for installation, inspection, maintenance and repair, safe operation and operator training of these lifters follow:

INSTALLATIONBelow Hook Lifters shall be assembled and installed in accordance with the manufacturer’s instructions, unless otherspecific arrangements have been approved in writing by manufacturer. When lifter/auxiliary power supply is required,user inspection shall ensure that the power source complieswith ANSI/NFPA 70, National Electrical Code and shall includea power disconnect switch as required in accordance withANSI/NFPA 70 based on the lifters requirements. If electricalconnections are made, the power supply and correspondingpower disconnects shall be connected to the line side (powersupply side) of the crane disconnect or to an independent circuit as specified in the manufacturer’s instruction manual.

Check for correct rotation of all pumps and power units, lubrication of moving parts, and filling of reservoirs, all in accordance with manufacturer’s instructions.

OPERATOR TRAININGLifters shall be operated in accordance with manufacturer’sinstruction manual, and by personnel who have received instructions described in the “Operating Practices” section of these guidelines. Training shall also include instruction regarding:

1. Details of the lifting cycle.

2. Application of the lifter to the load including (according to the manufacturer’s instructions) adjustments to the lifter, if any, to adapt it to varioussizes and kinds of loads.

3. Instruction in any special operations or precautions that may be required.

4. Recognition of proper load configuration. For example, preferred operation requires an orderly pattern of stacking.

5. Before assuming responsibility for using the lifter, an operator shall demonstrate his understanding of the lifting procedure to the instructor. The instructorshould record notes of operator’s demonstrated ability

INSPECTIONThe lifter shall be visually inspected by or under the directionof an appointed person on a daily or weekly schedule depend-ing on the nature of the lifter and the severity of the service.

Details to look for include but are not limited to:

1. Structural deformation.

2. Cracks in the structural frame, welds, hoist hook attachment points, mechanically operating parts, any attached slings, clevises and hooks.

3. Malfunctions during operation of a mechanically operating lifter.

4. Loose covers, fasteners and stops.

5. Faulty operation of automatic hold and release mechanisms.

6. Wear of hoist hooking points, load supporting clevises, pins, slings, linkages and mechanical parts.

7. Missing nameplates and markings. Contact CM Cady for replacements.

MAINTENANCE & REPAIRS 1. A preventive maintenance program should be

established for each lifter by a qualified person based on recommendations made by its manufacturer.

2. A qualified person should have responsibility for repairs. Dated records and details of repairs and parts replacement should be carefully maintained by a qualified person, and copies kept in your possession.

3. Replacement parts shall be at least equivalent to the original manufacturer’s specifications.

MODIFICATIONS OR REPAIRS PERFORMED ON YOUR LIFTING EQUIPMENT WITHOUT PRIOR WRITTEN APPROVAL FROM CM CADY VOIDS YOUR WARRANTY. REFER TO ASME STANDARDS FOR INFORMATION REGARDING THE LIABILITY OF REPAIRED OR MODIFIED LIFTERS.

CARE & USE


OPERATING PRACTICES

DO’s 1. The operator shall receive, read and understand the manufacturer’s instruction manual.

2. The operator shall watch carefully that the lifter is performing properly during the lifting procedure.

3. The operator shall know the standard crane hand signals.

4. The operator shall only respond to signals from an appointed person. However, stop signals from anyone shall be obeyed.

5. The operator shall notify a designated person when he considers a load to be unsafe.

6. The operator shall inspect the lifter before using. Any defect observed shall be examined by a qualified person to determine if it is a hazard.

DON’Ts 1. The operator shall not operate a malfunctioning lifter or one with an “out of service” tag attached.

2. The operator shall not use the lifter for any purpose(s) other than those designated by the manufacturer’s instruction manual.

3. The operator shall not use a lifter when the capacity, weight or product safety labels are missing or are no longer legible.

4. No one shall make alterations or modifications to lifters without consulting the manufacturer.

5. No one shall obscure or paint over the manufacturer’s capacity, weight, or safety markings.

6. Loads shall not be lifted higher than necessary or be left suspended unattended.

7. The lifter shall not lift a load that is not properly balanced for safe lifting.

HANDLING THE LOAD 1. The lifter shall not be loaded in excess of its rated load.

2. The combined weight of the lifter and load shall not exceed the rated load of the crane or hoist.

3. The lifter shall be applied to the load in accordance with the manufacturer’s recommended operating procedure.

4. Lifter ropes and chains shall not be kinked, and multiple part lines shall not be twisted about each other.

5. The lifter shall not touch obstructions during load movement.

6. The lifter shall not be loaded with loose material that might fall during movement.

7. The operator or other personnel shall not place themselves or any part of their bodies beneath suspended loads.

8. The load or lifter shall not be slid on the floor or other surface.

9. The lifter shall not be used for loads for which it is not designed.

10. If suspended loads are moved manually, they shall be pushed, not pulled.

11. A preliminary lift of a few inches shall be made to establish that the load is stable.

12. All loads shall be accelerated and decelerated smoothly and slowly.

MODIFICATIONS OR REPAIRS PERFORMED ON YOUR LIFTING EQUIPMENT WITHOUT PRIOR WRITTEN APPROVAL FROM CM CADY VOIDS YOUR WARRANTY. REFER TO ASME STANDARDS FOR INFORMATION REGARDING THE LIABILITY OF REPAIRED OR MODIFIED LIFTERS.

CARE & USE

Stock # CMCB-1213 DP 2500 BB

KNOW HOW...KNOW WHY Columbus McKinnon is a global leader in providing expertiseand training in the proper use and inspection of rigging andoverhead lifting equipment. With a range of comprehensiveprograms and seminars conducted at venues throughout North America, as well as on site at private companies and industries, Columbus McKinnon courses include:

Hoist Maintenance RiggingLoad Securement Safe HoistingCrane & Hoist Inspection Crane Operator TrainingRigging Gear Inspection

Classes are available at our Niagara Training Center and thestate-of-the-art Hoist & Rigging Training Center of Excellence in the Center for Occupational Health and Automobile Manufacturing (COHAM) lab located at The OhioState University. The COHAM lab is a hands-on learning centerthat allows attendees to understand how to properly use andinspect overhead lifting equipment. This leading-edge trainingprogram is designed to increase workplace productivity andsafety in an ergonomically friendly training environment.

In addition to the strong knowledge base exemplified by comprehensive training programs, Columbus McKinnon is one of the only manufacturers supplying complete lifting systems to satisfy unique material handling requirements of users in a variety of environments. From jib cranes and hoists to chain slings, clamps,and related attachments; systems include products that are matched specifically to the lifting needs of theapplication. Products may also be modified in order to ensure that the proper system is in place for the job.

Whether your needs call for a single Lodestar®

electric chain hoist or a completely engineered systemto outfit your production facility, Columbus McKinnon provides the material handling products and expertise you need to keep your workforce productive and safe.

Phone: (800) 888.0985 • (716) 689.5400 • Fax: (716) 689.5644 • www.cmworks.com

F A M I L Y O F B R A N D S

©2013 Columbus McKinnon Corporation. All Rights Reserved.

lifting beams spreader beams roll lifters coil

Documents