letter of intent for revised comcheck 7/5/18dreyfusconstruction.com/files/glenwood_shop... ·

Letter of intent for Revised ComCheck 7/5/18

To whom it may concern,

CE Inspections is under contract to perform the energy ComCheck design work for the

Glenwood Cemetery Shop, project # 17106706.

The exterior wall assemblies have been redesigned as reflected in the attached revised ComCheck.

Continuous insulation was added to the wall assembly in order to maintain a grade 1 air barrier and to

apply a thermal break against the metal cladding. This is important to prevent sweating within the

conditioned spaces.

Any questions or other needs for permit regarding energy code compliance can be addressed

directly to CEIn.

Thanks,

Ryan Atlee

281-687-6901

[email protected]

Thermo-ply® Structural Sheathing for Strong Structures: Strengthen your building envelope and bottom line with

Thermo-ply ® Structural Sheathing. A stable-priced, high-performance alternative to wood structural panels,

Thermo-ply ® meets or exceeds building codes, provides an efficient WRB and best in class Air Barrier.

Thermo-plyS T R U C T U R A L S H E A T H I N G

®

of red (the most heat loss) to purple/blue (n

OX Engineered Products • 700 Centreville Road • Constantine, MI 49042 • 800-345-8881 • f 269-435-7510 • www.ox .com

* Formaldehyde is classified as a probable human carcinogen by the U.S. Environmental Protection Agency.

Thermo-ply® is a registered trademark of OX Engineered Products, LLC and all other trademarks, registered trademarks, copyrights and logos are the property of their respected owners.

BUILD THE BETTER WALLW

STRONG WALLSComposed of pressure laminated plies consisting of high-strengthcellulosic fibers. Fibers are specially-treated to be water resistantand are bonded with a proprietary water-resistant adhesive. A protective polymer layer is applied on both sides of the panel, and foil facings may be applied on oneor both faces.

STRONG WATER RESISTANCE and AIR BARRIER-Factory-extrusion coating for built-in Water Resistive Barrier with ¾” overlapped joints OR taped joints. -Air tight seal to studs reduces air leakage and provides best-in-class air barrier -AMG (Advanced Moisture Guard) option provides adhesive with the 3/4” overlap.Provides self adhesive overlap panel joints for even tighter water and air barrier performance.

STRONG ENVIRONMENT-Free of Harmful chemicals, VOC-free and no toxic bonding agents-No added asphalts, formaldehyde, phenols or CFCs-Made from 94% recycled fibers and is 99% recyclable

STRONG COMPETITIVE EDGE and BOTTOM LINE-Stable Pricing-Thermo-ply grades to fit needs all over the house: In addition to exterior wall sheathing, consider using Thermo-ply as an air barrier in internal sheathing applications that require a thin air-barrier or draft stop.-Temporary surface protector for floors and countertops.-Light-weight, durable and easy installation-Custom sizes and private label -Made in USA

THERMO-PLY OPTIONS: ALL AVAILABLE ON ALL GRADES

THERMO-PLY GRADES

BLUE/BLUE AMG

RED/RED AMG

GREEN/GREEN AMGLight Structural Grade .078” thickness,290 lbs/MSF, 400 sheets per skid

Standard Structural Grade, 0.113” thickness,414 lbs/MSF, 300 sheets per skid

High Structural Grade, 0.135” thickness,504 lbs/MSF, 250 sheets per skid

48” or 48- 3/4” widths at no MSF up charge8’, 9’ or 10 ‘ lengths at no MSF up chargeCustom lengths up to 14’ available

Thermo-ply OSB

94 % post consumer recycled content, contains no added formaldehyde or toxic agents

Made from wood chips, may contain formaldehyde

Commodity - rapid price fluctuations

Requires additional WRB layer

Low moisture tolerance - significant swelling when wet. Source for mold

Average air infiltration performance

Typically no custom sizes or print available

45 lbs for 4’x8’ sheet

Stable Pricing

Extrusion Coated WRB both sides

High moisture tolerance

Custom sizes and private labeling available

~ 13 lbs for 4’x8’ sheet

Tight seal controls air infiltration for lower ACH

alls built with are High Performance Walls STRUCTURAL SHEATHING

caitlinscott

Rectangle

INSTALLATION

THERMO-PLY® INSTALLATION INSTRUCTIONS/ Instrucciones de Instalacion

APPLICATIONS: Wall sheathing for buildings constructed in accordance with IRC and IBC for light-frame construction

Structural wall sheathing to provide lateral load resistance (wind and seismic) for braced wall panels used in light-frame construction Structural wall sheathing to provide resistance to transverse loads for wall assemblies Structural wall sheathing to provide resistance to uplift loads for wall assemblies Approved WRB Approved air-barrier material Where other means of wall bracing are provided or not required, any grade of Thermo-ply may be used in non-structural applications as outlined in DRJ Evaluation Reports Gable Ends on Trusses Air barrier behind shower units and other internal sheathing applications that require a thin air-barrier or draft stop. Temporary floor or surface coverings protection Templates and Layout

1. Orientation & Fastener Pattern/ Orientacion

Install vertically or horizontally. Fastener Pattern for Structural: 3 o.c.Start at #1 and move across panel. DO NOT fasten 4 corners first. DO NOT use as a nail base.

3. Joints/Water Resistive Barrier Options/ Junturas

2. Fastening/Fijacion

Use 16 gauge 1” crown, 1 1/4” length staple OR 11 ga. 1 1/4” length roofing nail.Staple crown should be flush.Staples must run parallel with wood grain of framingstuds at sheathing seams.

To achieve approved WRB, joints can be:

Overlapped OR butted and taped with approved tape.Lapped seams should be overlapped by 3/4”and fastened with single row fasteners.

16 ga 1” Crown, 1 1/4” length

staple

11 ga 1 1/4” length

General for Structural and WRB Applications

STRUCTURAL SHEATHING


Lapped Joint



DO NOT FASTEN EACH

OF THE 4 CORNERS

FIRST

1

34

4

2

2

2

2

34

4

4

4

3

3

3

3

2

2

Instalar vertical o horizontal. Fija a 3”/3” o.c.Trabajando de un lado a otro del panel, empiece a asegurar de arriba hacia abajo.(Referirse a las instrucciones de instalacion al frente del panel) CUIDADO DE NO ASEGURAR PRIMERO LAS CUATRO ESQUINAS. Cuidado de no puede ser usado como un base para clavar. Necesita estar instalando usando 16 calibre, minimo

1” grapa corona, 1 ¼” largo grapas galvanizado.Los cerrojos necesitan clavar a ras de la superficie, sin cortar el superficle. Es importante cuando se usan las grapas de asegurarlas en la direccion paralela en el tachon.

Para WRB, puede ser doblado o unido a los lados. Usando cinta de construccion aprobado. Junturas superpuesto para ¾” y elementos de fijacion de una hilera

Overlapped 3/4” Butted and Taped

All Thermo-ply Grades shall be installed in accordance with the manufacturer’s published installation instructions in the Evaluation Report. Where Thermo-plyextends beyond the bottom of a wall and overlaps the band joist below, fasten the bottom edge of the Thermo-ply to the wall bottom plate where it meets theband joist. Due to shrinkage of the band joist, do not fasten the sheathing to the band joist.

Window Treatment: If windows and doors are made to accommodate traditional 1/2” sheathing materials, order window with adjustable nailing fins from thesupplier. Door brick moldings may be planed or routed 5/16” in order to accommodate the different sheathing thickness, whether at the jobsite or from the millwork supplier. Thermo-ply must be installed with appropriate flashing and counter flashing in conformance with manufacturer’s install instructions, accepted building standards and in compliance with local building codes.

OX Engineered Products • 700 Centreville Road • Constantine, MI 49042 • 800-345-8881 • f 269-435-7510 • www.oxengineeredprodu

Thermo-ply®

Scan

Physical Properties Thermo-ply Structural Sheathing

Physical Property Standard Test Result

R-value Green: .13 Red: .18 Blue: .20

Unit of Measure

Drainage efficiency

Sound Transmission*

*As measured in a typical wall assembly.

Water Absorption

Permeability

Air Barrier

ASTM C518

ASTM E2273

ASTM E90

97.8

ASTM D1037

ASTM E96

ASTM E2178

%

dB

%

Perms

L/s/M @ 75 Pa

STC 39

0.6<

0.02<

F. Ft . h/Btu2

2

PRODUCT NAME AND DESCRIPTION: THERMO-PLY STRUCTURAL SHEATHING

BASIC USE: Thermo-ply is a code-approved exterior structuralsheathing, water resistive barrer and air barrier. ReferenceDrJ Technical Evaluation Reports 1004-01, 1004-02, 1004-03.

COMPOSITION AND MATERIALS: Composed of pressure laminated plies consisting of high-strengthcellulosic fibers. These fibers are specially-treated to be water resistant and are bonded with a proprietary water-resistant adhesive. A protective polymer layer is applied on both sides of the panel, and foil facings may be applied on one or both faces.

TECHNICAL DATA: Construction Specifications InstituteIdentification Codes: Sheathings: 06115Structural Panels: 06120Building Insulation: 07210Draft Stop: 07270

NOTICE: No freedom from any patent owned by OX Engineered Products, LLC or others is to be inferred. Because use conditions and applicable laws may differ from one location to another and may change with time, Customer is responsible for determining whether products and the information in this document are appropriate for Customer’s use and for insuring that Customer’s workplace and disposal practices are in compliance with applicable laws and other government enactments. OX Engineered Products, LLC assumes no obligation or liability for the information in this document. The product shown in this literature may not be available for sale/and or available in all geographies where OX Engineered Products, LLC is represented. The claims made may not have been approved for use in all countries or regions. NO EXPRESS WARRANTIES ARE GIVEN EXCEPT FOR ANY APPLICABLE WRITTEN WARRANTIES SPECIFICALLY PROVIDED BY OX. ALL IMPLIED WARRANTIES INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED. All disputes for any product or service provided by OX should be determined under the applicable laws of the Commonwealth of Pennsylvania and have the proper and exclusive venue in the York County Court of Common Pleas, York, PA, or the Federal CircuitCourt for the Middle District of Pennsylvania.

STRUCTURAL:Transverse and Lateral wall bracing in compliance with theIRC and the IBC Type V Construction.

AIR & WATER RESISTIVE BARRIER: When installed in accordance with manufacturer’s install instructions, Thermo-ply is approved as WRB and air barrer. All joints must be installed with one of two techniques: 1. Joints overlap at least 3/4” OR 2. Joints are taped with approved tape.

COMPONENT OF 1-HOUR FIRE ASSEMBLY:

STORAGE: Maintain packaging protection until using the product.If stored exposed without protective packaging, cover with waterproof tarpaulin. Do not store directly on the ground unprotected or in standing water. Normal careshould be taken to avoid excessive moisture exposure(soaking) to unpackaged product. Recommended maximum exposure 60 days.

See DrJ Evaluation Report 1210-01 for use of Thermo-ply in a 1-hour fire-rated wall system in accordance with the Standard Methods of Fire Tests of Building Constructions and Materials using ASTM E-119 testing procedures.

AVAILABILITY: Visit www.oxengineeredproducts.com to find an OX Sales Rep near you.

WARRANTY:

Thermo-ply is backed by a 10 Year Limited Warranty

Less than 5

Technical Information

TOP OF STEEL-LOWER14' - 0"

19

SHOP T.o C.0"

WASH BAYBAY 00

PREFINISHED METAL TRIM, RE METAL BUILDING MANUFACTURER


SCHEDULED R-11 INSULATION UNDER ROOF PANELS ABOVE PURLINS

SCHEDULED R-19 INSULATION BETWEEN PURLINS

METAL ROOF PANELS, RE METALBUILDING MANUFACTURER

PREFINISHED METAL BOX RAKETRIM, RE METAL BUILDINGMANUFACTURER

STEEL ROOF PURLINS, TYPICAL, REMETAL BUILDING MANUFACTURER

METAL SOFFIT PANELS, RE METALBUILDING MANUFACTURER


STRUCTURAL FRAME, TYPICAL REMETAL BUILDING MANUFACTURER

PREFINISHED METAL BOX EAVETRIM, RE METAL BUILDINGMANUFACTURER

UNDERSLAB VAPOR RETARDER, 15MIL THICKNESS MIN., RE:STRUCTURAL DRAWINGS FOR MOREINFORMATION

A35010


A

SHOP T.o C.0"

MANAGER106A

SET IN FULL BED OF SEALANT

5/8" TYPE-X GYPSUM WALLBOARD

PREFINISHED GUTTER SUPPORTS, RE METAL BUILDING MANUFACTURER

SCHEDULED INSULATION,R 25

EXTEND STUD FRAMING TO GIRT AND FASTEN TO GIRT

EXHAUST FAN. RE: MECHANICALCOORDINATE LOCATION WITH GIRTS AND INTERIOR PARTITION FRAMING


CONTINUOUS THERMAL BREAK TAPE, TYP. AT ALL METAL WALL PANEL SUPPORTS AT CONDITIONED SPACE


SCHEDULED LINER FABRIC ATTACHED TO UNDERSIDE OF PURLINS

2X2 ACCOUSTICAL CEILING TILE ANDGRID, RE: FINISH SCHEDULE/TYPES

PREFINISHED CONTINUOUS METALBOX GUTTER WITH FLANGE,COORDINATE LOCATIONS OFGUTTER EXPANSION JOINT WITHDOWNSPOUTS, RE METAL BUILDINGMANUFACTURERPREFINISHED METAL BOX EAVETRIM, RE METAL BUILDINGMANUFACTURER



METAL WALL PANEL, RE METALBUILDING MANUFACTURER, REEXTERIOR ELEVATIONS


SEALANT OVER 1/2" COMPRESSIBLEFILLER AT JOINT

NEW PAVED AREA, RE CIVIL


1/8" THERMO-PLY SHEATHING BOARD, TYP. AT CONDITIONED SPACE. 7


B

SHOP T.o C.0"

TOP OF STEEL-UPPER18' - 10 1/2"

I T106C



PREFINISHED METAL BOX EAVETRIM, RE METAL BUILDINGMANUFACTURERMETAL ROOF PANELS, RE METALBUILDING MANUFACTURER



STEEL GIRT, TYPICAL, RE METALBUILDING MANUFACTURER






5/8" TYPE-X GYPSUM WALLBOARD



1/8" THERMO-PLY SHEATHING BOARD, TYP. AT CONDITIONED SPACE7


B

SHOP T.o C.0"


OPENBAY 22

INSTALL INSECT SCREEN BEHIND LOUVERS

INSTALL INSECT SCREEN IN FRAME .

PROVIDE PREFINISHED STEEL SHEET FASTENED TO 8X25C16 FRAMING

PROVIDE PREFINISHED STEEL SHEET FASTENED TO 8X25C16 FRAMING AT ALL 4 SIDES OF OPENING

PROVIDE PREFINISHED STEEL SHEET FASTENED TO 8X25C16 FRAMING AT ALL 4 SIDES OF OPENING

SCHEDULED METAL WALL PANELS

SCHEDULED METAL WALL PANELS

PREFINISHED TRIM







DASHED LINE INDICATES STEEL GIRT BEYOND, BY METALBUILDING MANUFACTURER

A35030


G





PREFINISHED CONTINUOUS METALBOX GUTTER WITH FLANGE,COORDINATE LOCATIONS OFGUTTER EXPANSION JOINT WITHDOWNSPOUTS, RE METAL BUILDINGMANUFACTURER






19

STEEL ROOF PURLINS, TYPICAL, REMETAL BUILDING MANUFACTURER



PREFINISHED METAL BOX RAKETRIM, RE METAL BUILDINGMANUFACTURER

ASSEMBLY: R-11 LINER SYSTEM +R-19 BATT INSULATION BETWEENPURLINS, TYPICAL FOR ENTIRE ROOF

B

1' - 8"

PREFINISHED METAL TRIMBY METAL BUILDINGMANUFACTURER, TYP.

METAL PANEL BYMETAL BUILDING MANUFACTURER, TYP.

STEEL FRAME BYMETAL BUILDING MANUFACTURER

PREFINISHED FLAT METAL TRIMBY METAL BUILDING MANUFACTURER

AT

TS

XETE FO

SA

DILL

OA.KYLE

15331

REGIS

TERED ARCHITECT

N

S H E E T N U M B E R :

S H E E T C O N T E N T S :

P R O J E C T I N F O R M A T I O N :

REGISTRATION NUMBER: 1 5 3 3 1

COPYRIGHT INFORMATION:These drawings and specifications are copyrighted. They are and shall

remain the property of Dillon Kyle Architecture, Inc. They are not to be used on other projects or extension to this project except by agreement in writing and with appropriate compensation to Dillon Kyle Architecture, Inc. The contractor is responsible for confirming and correlating dimensions at the job site. The

architect will not be responsible for construction means, methods, techniques, or procedures, or for the safety precautions and programs in connection with

the project. Copyright 2018, Dillon Kyle Architecture, Inc.

Dillo

n Ky

le Ar

chite

ctsPl

otte

d:

26 21 16 11 6 1

30 25 20 15 10 5

713.520.8792

1500 W ALABAMAHOUSTON, TEXAS 77006

www.dkarc.com

\\DKA

-FPA

D\Us

ers\c

aitlin

scott

\REV

IT LO

CAL\2

018.0

4.19_

R18_

Glen

wood

Main

tenan

ceSh

op_C

entra

l_cait

linsc

ott.rv

t7/2

4/201

8 5:48

:28 P

M

MAIN

TENA

NCE

SHOP

BLD

G

UPDA

TED

CONS

TRUC

TION

SET

GLEN

WOO

D CE

METE

RY25

55 W

ASHI

NGTO

N AV

EHO

USTO

N, T

EXAS

7700

7

WALL SECTIONS

A350

UPDA

TED

CONS

TRUC

TION

SET

07/25/2018

3/4" = 1'-0" 6WALL SECTION-WEST GRID 19/G 3/4" = 1'-0" 11WALL SECTION-GRID A/6.2

3/4" = 1'-0" 21WALL SECTION-GRID B/6.2 3/4" = 1'-0" 26WALL SECTION-GRID B/5

3/4" = 1'-0" 20WALL SECTION - GRID G/18 1 1/2" = 1'-0" 10RAKE DETAIL @ GRID 19

1 1/2" = 1'-0" 30OPENING IN DOUBLE SIDEDMETAL PANEL WALL-HEAD

ISSUES / REVISIONS

REV. DESCRIPTION DATEE PRELIMINARY PRICING SET 2 04/17/2017G FOR PERMIT AND CONSTRUCTION 09/18/2017H PLAN CHECK COMMENT RESPONSE #1 10/27/20174 UPDATED CONSTRUCTION SET 12/27/20176 REVISION 6 - DIMENSION AND DETAIL

ADJUSTMENTS05/18/2018

7 PERMIT REVISION 07/25/2018


B

SHOP T.o C.0"

SCHEDULED INSULATION R-25


CONTINUOUS THERMAL BREAK TAPE, TYP. AT ALL METAL WALL

PANEL SUPPORTS AT CONDITIONED SPACE.

COMPACTED FILL PER SOILSREPORT - SEE STRUCTURALDRAWING AND SOILS REPORT



METAL WALL PANEL, RE METALBUILDING MANUFACTURER, RE

EXTERIOR ELEVATIONS








1/8" THERMO-PLY SHEATHING BOARD, TYP. AT CONDITIONED

SPACE.

7


SHOP T.o C.0"


0


A6021

SCHEDULED INSULATION.R-25

12




SCHEDULED LINER FABRIC ATTACHED TO UNDERSIDE OF

PURLINS

1/8" THERMO-PLY SHEATHING BOARD, TYP. AT CONDITIONED SPACE

7


7

SHOP T.o C.0"







PREFINISHED CONTINUOUS METALBOX GUTTER WITH FLANGE,COORDINATE LOCATIONS OFGUTTER EXPANSION JOINT WITHDOWNSPOUTS, RE METAL BUILDINGMANUFACTURER






6.1

SHOP T.o C.0"

1/8" THERMO-PLY SHEATHING BOARD, TYP. AT CONDITIONED SPACE.

2 HR RATED WALL PER UL N. U493, RE:G003

PREFINISHED METAL TRIM, RE METAL BUILDING MANUFACTURER, MOUNT TRIM TO GYP, EXTEND TO ACCOMMODATE HAT CHANELS AT THIS AND SIMILAR LOCATIONS

PREFINISHED TRIM

SCHEDULED INSULATION.R-25




METAL SOFFIT PANELS, RE METALBUILDING MANUFACTURERSCHEDULED LINER FABRIC

ATTACHED TO UNDERSIDE OF PURLINS



HAT CHANNELS

7

AT

TS

XETE FO

SA

DILL

OA.KYLE

15331

REGIS

TERED ARCHITECT

N









Dillo

n Ky

le Ar

chite

ctsPl

otte

d:

26 21 16 11 6 1

30 25 20 15 10 5

713.520.8792


www.dkarc.com

\\DKA

-FPA

D\Us

ers\c

aitlin

scott

\REV

IT LO

CAL\2

018.0

4.19_

R18_

Glen

wood

Main

tenan

ceSh

op_C

entra

l_cait

linsc

ott.rv

t7/2

4/201

8 5:48

:44 P

M

MAIN

TENA

NCE

SHOP

BLD

G

UPDA

TED

CONS

TRUC

TION

SET

GLEN

WOO

D CE

METE

RY25

55 W

ASHI

NGTO

N AV

EHO

USTO

N, T

EXAS

7700

7

WALL SECTIONS

A351

UPDA

TED

CONS

TRUC

TION

SET

07/25/2018

3/4" = 1'-0" 1WALL SECTION-GRID B/6.1 3/4" = 1'-0" 6WALL SECTION-GRID 1/B

3/4" = 1'-0" 11WALL SECTION-GRID 7/B 3/4" = 1'-0" 21WALL SECTION - GRID 6.1

ISSUES / REVISIONS

REV. DESCRIPTION DATEE PRELIMINARY PRICING SET 2 04/17/2017G FOR PERMIT AND CONSTRUCTION 09/18/2017H PLAN CHECK COMMENT RESPONSE #1 10/27/20174 UPDATED CONSTRUCTION SET 12/27/20177 PERMIT REVISION 07/25/2018

CT

6.1

A

PREFINISHED METAL BOXDOWNSPOUTS, RE METAL BUILDINGMANUFACTURER

HAT CHANNELS

SCHEDULED INSULATION,R-25

2 LAYERS OF 5/8" GYP. EACH SIDE OF METAL STUD PER UL N. U419, RE:G003

4 1/4" 4 1/4"


SCHEDULED LINER FABRIC ATTACHED TO

INSIDE OF GIRTS

1' - 1

"



PANEL SUPPORTS AT CONDITIONED SPACE

7

6.2

A

5/8" TYPE-X GYPSUM WALLBOARDSCHEDULED INSULATION,R-25


4"

1' - 1

"


6.2 6.1

B

X

1' - 8"SCHEDULED INSULATION, R-25

SCHEDULED INSULATION, R-25

1' - 8

"

1' - 1

"

1' - 1

"

4 1/4" 4 1/4"

2 LAYERS OF 5/8" GYP.PER UL N. U493, RE:G003

1/8" THERMO-PLY SHEATHING, TYP. AT CONDITIONED SPACE.

SCHEDULED LINER FABRIC ATTACHED TO INSIDE OF GIRTS

SCHEDULED LINER FABRIC ATTACHED TO INSIDE OF GIRTS

PREFINISHED METAL TRIM, RE METAL BUILDING MANUFACTURER, TYP




7

6.2

C

1' - 1"

9"4"



PREFINISHED METAL TRIM, RE METAL

BUILDING MANUFACTURER, TYP



7

6.2


SCHEDULED THINSET TILE, TYP

SCHEDULED ACOUSTIC BATT AROUND RESTROOMS, TYP

1' - 1"



7

6.2

F


1' - 1

"

1' - 1"





7

7

A

PREFINISHED METAL BOXDOWNSPOUTS, RE METAL BUILDING

MANUFACTURER

X



1' - 1

"

1' - 1"





7

7

F

1' - 1

"



1' - 2"



7

7

E

1' - 2"






7

7

D


1' - 2"




ROLLING STEEL DOOR WITHELECTRIC POWERED OPERATIONACCESSIBLE FROM THE EXTERIOR,WITH MINIMUM 2 VENTILATED SLATS,SEE DOOR SCHEDULE

STRUCTURAL STEEL DOOR/WINDOWFRAMING, RE METAL BUILDINGMANUFACTURER


7

B

SCHEDULED INSULATION, R-252 LAYERS OF 5/8" GYP.

PER UL N. U419, RE:G003


1' - 1

"


HAT CHANNELS

7

AX

X

1' - 1

"


3/4"

7

19 H

USE WIDER GIRTS OR STAGGER GIRTS AT THIS LOCATION

1' - 0"


9

E

H

SEE FLOOR PLANS / G003 FOR PARTITION INFORMAITON

9

D

G

8.3

ROLLING STEEL DOOR WITHELECTRIC POWERED OPERATION

ACCESSIBLE FROM THE EXTERIOR,WITH MINIMUM 2 VENTILATED SLATS,

SEE DOOR SCHEDULE

STRUCTURAL STEEL DOOR/WINDOWFRAMING, RE METAL BUILDINGMANUFACTURER

16H

SEE FLOOR PLANS/G003 FOR PARTITION INFORMATION

B

1' - 8

"

PREFINISHED METAL TRIM; BY METAL

BUILDING MANUFACTURER, TYP.

PREFINISHED FLAT METAL TRIM, BY METALBUILDING

MANUFACTURER

STEEL FRAME BY METAL BUILDING MANUFACTURER

PREFINISHED METAL TRIM; BY METAL

BUILDING MANUFACTURER, TYP.

AT

TS

XETE FO

SA

DILL

OA.KYLE

15331

REGIS

TERED ARCHITECT

N









Dillo

n Ky

le Ar

chite

ctsPl

otte

d:

26 21 16 11 6 1

30 25 20 15 10 5

713.520.8792


www.dkarc.com

\\DKA

-FPA

D\Us

ers\c

aitlin

scott

\REV

IT LO

CAL\2

018.0

4.19_

R18_

Glen

wood

Main

tenan

ceSh

op_C

entra

l_cait

linsc

ott.rv

t7/2

4/201

8 5:48

:52 P

M

MAIN

TENA

NCE

SHOP

BLD

G

UPDA

TED

CONS

TRUC

TION

SET

GLEN

WOO

D CE

METE

RY25

55 W

ASHI

NGTO

N AV

EHO

USTO

N, T

EXAS

7700

7

PLAN DETAILS

A401

UPDA

TED

CONS

TRUC

TION

SET

07/25/2018

1 1/2" = 1'-0" 1DTL A-6.1 1 1/2" = 1'-0" 6DTL A-6.2

1 1/2" = 1'-0" 2DTL B-6.2

1 1/2" = 1'-0" 3DTL C-6.2

1 1/2" = 1'-0" 4DTL DD-6.2

1 1/2" = 1'-0" 5DTL F-6.2

1 1/2" = 1'-0" 16DTL A-7

1 1/2" = 1'-0" 14DTL F-7

1 1/2" = 1'-0" 18DETAIL E-7

1 1/2" = 1'-0" 17DTL D-7 1 1/2" = 1'-0" 12DETAIL B-2HR WALL

1 1/2" = 1'-0" 11DTL - WINDOW JAMB AT COND.

SPACE

1 1/2" = 1'-0" 13DTL H-19 1 1/2" = 1'-0" 22DTL H-9

1 1/2" = 1'-0" 21DTL G D-9

1 1/2" = 1'-0" 20DTL H-16

1 1/2" = 1'-0" 23DTL-OPENING IN DOUBLE SIDED

METAL PANEL WALL-PLAN

ISSUES / REVISIONS

REV. DESCRIPTION DATEE PRELIMINARY PRICING SET 2 04/17/2017G FOR PERMIT AND CONSTRUCTION 09/18/2017H PLAN CHECK COMMENT RESPONSE #1 10/27/20174 UPDATED CONSTRUCTION SET 12/27/20176 REVISION 6 - DIMENSION AND DETAIL

ADJUSTMENTS05/18/2018

7 PERMIT REVISION 07/25/2018

7

7

letter of intent for revised comcheck 7/5/18dreyfusconstruction.com/files/glenwood_shop... ·

Documents