labview for measurement and data analysis

8/3/2019 LabVIEW for Measurement and Data Analysis

1/9

LabVIEW For Measurement And Data Analysis

LabVIEW for Measurement and Data Analysis

housands of engineers and scientists rely on LabVIEW for a variety of applications: test and measurement, process control and autom

monitoring and simulation. LabVIEW is the tool of choice due to its unparalleled connectivity to instruments, powerful data acquisition

capabilities, natural dataflow-based graphical programming interface, scalability, and overall function completeness. One need that per

regardless of the area of expertise is the fact that users must manipulate data and measurements, and make decisions based on it. Th

paper focuses on the capabilities that make LabVIEW the right tool for data and measurement analysis.

Table of Contents:

Introduction

Choosing the Correct Method for Analysis

Analysis Categories

Which Analysis Tools are Available for LabVIEW?

Add-On Tools for Analysis

Conclusion

Appendix

Introduction.

Users generally start their work by acquiring data into an application or program, because their tasks typically require interaction with

physical processes. In order to extract valuable information from that data, make decisions on the process, and obtain results, the data

needs to be manipulated and analyzed. Unfortunately, combining analysis with data acquisition and data presentation is not always a

straightforward process. Application software packages typically address one component of the application, but seldom address all asp

and needs to get to a complete solution. LabVIEW was designed to address the requirements for a start-to-finish, fully-integrated solut

so that customers can seamlessly integrate all phases of their application in a single environment.

LabVIEW For Measurement And Data Analysis - Biocompare Buyer... http://www.biocompare.com/Articles/ApplicationNote/1296/LabV

9 22.10.20


2/9

Figure 1. LabVIEW Virtual Instrument Block Diagram

While there are many tools that independently address each of the requirements, only LabVIEW combines all of them with the power of

graphical programming and state-of-the-art data acquisition hardware, using the power of your PC. It is the combination of data acquis

data analysis, and presentation of results, that truly maximizes the power of Virtual Instrumentation. A virtual instrument consists of an

industry-standard computer or workstation equipped with powerful application software, cost-effective hardware such as plug-in boards

driver software, which together perform the functions of traditional instruments. This is why applications and programs built with LabVIE

are referred to as VIs (virtual instruments).

As an engineering-focused tool, LabVIEW makes hundreds of analysis functions available for researchers, scientists, and engineers, a

as students and professors. They can build these functions right into their applications to make intelligent measurements and obtain re

faster.

Choosing the Correct Method for Analysis

Users incorporate analysis into their applications and programs in different ways. There are certain considerations that help determine

way in which analysis should be performed.

Inline vs. Offline analysis

Inline analysis implies that the data is analyzed within the same application where it is acquired. This is generally the case when dealin

with applications where decisions have to be made during run time and the results have direct consequences on the process, typically

through the changing of parameters or executing of actions. This is typically the case in control applications. When dealing with inline

analysis, it is important to consider the amount of data acquired and the particular analysis routines that are performed on that data. A

proper balance must be found because they could easily become computationally intensive and have an adverse effect on the perform

of the application.

Other examples for inline analysis are applications where the parameters of the measurement need to be adapted to the characteristic

the measured signal. One case is where one or more signals need to be logged, but these change very slowly except for sudden burst

high-speed activity. In order to reduce the amount of data logged, the application would have to quickly recognize the need for a highe

sampling rate, and reduce it when the burst is over. By measuring and analyzing certain aspects of the signals the application can ada

the circumstances and enable the appropriate execution parameters. Although this is only one example, there are thousands of applica

where a certain degree of intelligence - the ability to make decisions based on various conditions - and adaptability are required, which

only be provided by adding analysis algorithms to the application.

Decisions based on acquired data are not always made in an automated manner. Very frequently, those involved with the process need

monitor the execution and determine whether it is performing as expected or if one or more variables need to be adjusted. Although it is

uncommon for users to log data, extract it from a file or database and then analyze it offline to modify the process, many times the chan


9 22.10.20


3/9

need to happen during run time. In these cases, the application must handle the data coming from the process, and then manipulate,

simplify, format, and present the data in a way that it is most useful to the user. LabVIEW users can then take advantage of the many

visualization objects to present that data in the most concise and useful manner.

LabVIEW offers analysis and mathematical routines that natively work together with data acquisition functions and display capabilities,

that they can be easily built into any application. In addition, LabVIEW offers analysis routines for point-by-point execution; these routin

are designed specifically to meet the needs of inline analysis in real-time applications. Users should consider certain aspects when de

whether point-by-point routines are appropriate.

Point-by-point analysis is essential when dealing with control processes where high-speed, deterministic, point-by-point data acquisitio

present. Any time resources are dedicated to real-time data acquisition, point-by-point analysis becomes a necessity as acquisition rate

and control loops are increased by orders of magnitude. The point-by-point approach simplifies the design, implementation, and testing

process, because the flow of the application closely matches the natural flow of the real-world processes that the application is monito

and controlling.

Figure 2. Array-based Analysis vs. Point-by-Point Analysis

Real-time data acquisition and analysis continue to demand more streamlined and stable applications. Point-by-point analysis is strea

and stable, because it ties directly into the acquisition and analysis process. With streamlined, stable point-by-point analysis, the acqu

and analysis process can move closer to the point of control in FPGA (field programmable gate array) chips, DSP chips, embedded

controllers, dedicated CPUs, and ASICs.

To better understand the advantages of point-by-point analysis routines, National Instruments suggests reading the document titled "G

Started with LabVIEW Point-By-Point VIs."

This document describes how to use the VIs and includes a case study that shows a complete application built in LabVIEW. The applic

demonstrates the simplicity and flexibility of point-by-point analysis.

By adding these powerful algorithms and routines into applications, users eliminate the guess work and create intelligent processes th

analyze results during run time, improving efficiency and iteratively correlating input variables to experiment or process performance.

Offline applications dont typically have the demand for results to be obtained in real-time fashion in order to make decisions on the pro

Offline analysis applications require only that sufficient computational resources are available. The main intent of such applications is t

identify cause and effect of variables affecting a process by correlating multiple data sets. These applications generally require importi

data from custom binary or ASCII files and commercial databases such as Oracle, Access, and other QL/ODBC-enabled

databases. Once the data is imported into LabVIEW, users perform several or hundreds of available analysis routines, manipulate the d

and arrange it in a specific format for


9 22.10.20


4/9

reporting purposes. LabVIEW provides functions to access any type of file format and database, seamlessly connect to powerful repor

tools such as NI DIAdem and the

Report Generation Toolkit for Microsoft Office, and execute the latest data-sharing technologies such as XML, Web-enabled data

presentation, and ActiveX.

Programmatic vs. Interactive Analysis

As LabVIEW users, scientists and engineers are very familiar with the many ways in which they can acquire data from hundreds of dev

They build intelligence into their applications to perform inline analysis and present results while the applications are running. In additio

they are aware that acquiring data and processing it for the sake of online visualization is not enough. Users typically store hundreds o

thousands of megabytes of data in hard drives and data bases. After anywhere from one to hundreds of runs of the application, users

proceed to extract information in order to make decisions, compare results, and make appropriate changes to the process, until the des

results are achieved.

It is relatively easy to acquire amounts of data so large that it rapidly becomes unmanageable. In fact, with a fast DAQ board and enou

channels, it may only take a few milliseconds to compile thousands of values. It is not a trivial task to make sense out of all that data.

Engineers and scientists are typically expected to present reports, create graphs, and ultimately corroborate any assessments and

conclusions with empirical data. Without the right tools, this can easily become a daunting task, resulting in lost productivity.

In order to simplify the process of analyzing measurements, LabVIEW programmers create applications that provide dialogs and interfa

that others can use so that depending on their input, specific analysis routines are performed on any given data set. By building this ty

application, users build a certain degree of interactivity into their applications. For this to be efficient, the programmer must have extens

knowledge about the information and the types of analysis in which the user is interested.

Figure 3. Time Domain Reflection VI Based on Joint Time-Frequency Analysis Functions

With LabVIEW, users can easily perform significant data reduction and formatting before storing it to disk, so that when the stored data

retrieved for further analysis, it is easier to handle. LabVIEW also provides hundreds of functions for generating reports based on the r

and information obtained from the acquired data.

National Instruments offers additional tools that are highly integrated with LabVIEW and are designed to enhance collaborative enginee

NI DIAdem is one such tool; it provides an easy-to-use environment for interactive, postacquisition analysis and report generation, with

powerful technical data management capabilities. To learn more about DIAdem, go to ni.com/diadem.

Analysis Categories


9 22.10.20


5/9

LabVIEW offers hundreds of built-in analysis functions that cover different areas and methods of extracting information from acquired d

You can use these functions as is, or modify, customize, and extend them to suit a particular need. These functions are categorized in t

following groups: Measurement, Signal Processing, Mathematics, Image Processing, Control, Simulation, and Application Areas.

Measurement

Amplitude and Level

Frequency (Spectral) Analysis

Noise and Distortion

Pulse and Transition

Signal and Waveform Generation

Time Domain Analysis

Tone Measurements

Signal Processing

Digital Filters

Convolution and Correlation

Frequency Domain

Joint Time-Frequency Analysis (Signal Processing Toolset)

Sampling/Resampling

Signal Generation

Superresolution Spectral Analysis (Signal Processing Toolset)

Transforms

Time Domain

Wavelet and Filter Bank Design (Signal Processing Toolset)

Windowing

Mathematics

Basic Math

Curve Fitting and Data Modeling

Differential Equations

Interpolation and Extrapolation

Linear Algebra

Nonlinear Systems

Optimization

Root Finding

Special Functions

Statistics and Random Processes

Image Processing

Blob Analysis and Morphology

Color Pattern Matching

Filters

High-Level Machine Vision Tools

High-Speed Grayscale Pattern Matching

Image Analysis

Image and Pixel Manipulation

Image Processing

Optical Character Recognition

Region-of-Interest Tools

Control


9 22.10.20


6/9

PID and Fuzzy Control

Simulation

Simulation Interface (Simulation Interface Toolkit)

Application Areas

Machine Condition Monitoring (Order Analysis Toolset)

Machine Vision (IMAQ, Vision Builder)

Motion Control

Sound and Vibration (Sound and Vibration Analysis Toolset)

For a complete list of LabVIEW analysis functions go to ni.com/analysis.

Which Analysis Tools are Available for LabVIEW?

NI LabVIEW already includes a powerful set of tools for analysis. These tools encompass a built-in set of libraries and functions design

specifically for analysis, with which users can address a wide range of applications.

LabVIEW analysis tools cover a broad range of applications. Advanced analysis functions can measure such signal characteristics as t

harmonic distortion, impulse response, frequency response, and cross-power spectrum. Scientists and engineers can also incorporate

mathematics or numerical analysis into their applications for purposes such as solving differential equations, optimization, root finding,

other mathematical problems.

Although users can develop these functions themselves, built-in functions make it easy to work quickly on the problem instead of the to

The advantage of using these functions also eliminates the need to understand the underlying theory required to build such algorithms

Figure 4. Sound Level Meter Application based on the Sound and Vibration Analysis Toolset

Add-On Tools for Analysis

In addition to the built-in analysis libraries, users rely on add-on toolsets and modules to reduce development time for specialized

application needs. By incorporating toolset components into custom applications, users reduce the need for particular expertise commo

associated with development more vertical applications such as advanced digital signal processing, sound and vibration measurement


9 22.10.20


7/9

order analysis, image processing, PID control, and simulation.

Advanced Signal Processing

The Signal Processing Toolset provides functions designed specifically for advanced digital signal processing (DSP). The included

functions are divided into three categories: Joint Time-Frequency Analysis, Wavelet Analysis, and Superresolution Spectral Analysis. In

addition, the toolset provides a graphical utility with which users can interactively design digital filters.

Joint Time-Frequency Analysis

Unlike conventional analysis technologies, the JTFA (joint time-frequency analysis) routines examine signals in both the time and frequ

domains simultaneously. JTFA can be applied in almost all applications in which the FFT is used, such as biomedical signals, radar ima

processing, vibration analysis, machine testing, and dynamic signal analysis. However, with JTFA you get more information by analyzin

time and frequency domains simultaneously.

Like the classical Fourier analysis, the JTFA consists of two major methods - linear and quadratic. The linear algorithms include short-

Fourier transform (STFT) and Gabor expansion (inverse short-time Fourier transform.) LabVIEW users can take advantage of these lin

transforms, to transfer a signal from the time domain into the joint time-frequency domain and vice versa. These routines are extremely

powerful for noise reduction purposes. The quadratic methods contain adaptive spectrogram, Choi-Williams distribution, cone-shaped

distribution, Gabor expansion-based spectrogram (also known as Gabor spectrogram), STFT-based spectrogram, and Wigner-Ville

distribution. Users can apply the quadratic transforms, to easily see how the power spectrum of a signal evolves over time. The Gaborspectrogram results in the best compromise between high resolution and cross-term interference.

Wavelets

Wavelets are a relatively new signal processing method. A wavelet transform is almost always implemented as a bank of filters that

decompose a signal into multiple signal bands. It separates and retains the signal features in one or a few of these subbands. Thus, on

the biggest advantages of using the wavelet transform is that signal features can be easily extracted. In many cases, a wavelet transfo

outperforms the conventional FFT when it comes to feature extraction and noise reduction. Because the wavelet transform can extract

signal features, wavelet transforms find many applications in data compression, echo detection, pattern recognition, edge detection,

cancellation, speech recognition, texture analysis, and image compression.

Superresolution Spectral Analysis

A primary tool for spectral analysis is the Fast Fourier Transform (FFT). For high-resolution spectra, FFT-based methods need a large

number of samples. However, in many cases the data set is limited because of a genuine lack of data or because users need to ensur

the spectral characteristics of the signal do not change over the duration of the data record. For cases where the number of data samp

limited, LabVIEW users can use model-based analysis to determine spectral characteristics. Using this technique, users assume a suit

signal model and determine the coefficients of the model. Based on this model, the application can then predict the missing points in th

given finite data set to achieve high-resolution spectra. In addition, model-based methods can also be used for estimating the amplitud

phase, damping factor, and frequency of damped sinusoids. Superresolution spectral analysis can be used in diverse applications incl

biomedical research, economics, geophysics, noise, vibration and speech analysis.

Sound and Vibration AnalysisThe LabVIEW Sound and Vibration Toolset extends LabVIEW with functions and visualization tools for handling engineering units,

calibration, frequency analysis, transient analysis, sound-level measurements, and fractional-octave analysis. This toolset provides

advanced tools to effortlessly create custom applications for sound and vibration analysis.

Functions include full, 1/3, 1/6, 1/12 and 1/24 octave; user-defined sampling frequency; user-defined number of bands; A, B, C weighti

time domain; standards compliance; exponential averaging (Slow, Fast, and Custom time constant); cross-power spectrum; frequency

response (H1, H2, and H3); coherence; and coherent output power. In addition, the toolset provides additional visualization tools such

waterfall graph, colormap graph, octave bar graph, and octave line graph that can be easily built into the front panels of LabVIEW

applications.


9 22.10.20


8/9

Order Analysis

The LabVIEW Order Analysis Toolset provides libraries to build custom LabVIEW-based measurement and automation applications wit

order analysis capabilities for order tracking, order extraction, and tachometer signal processing. The toolset employs Gabor Order

Tracking, a patented algorithm based on the ideas of joint t ime-frequency analysis.

With the Gabor Order Tracking algorithm, LabVIEW users can analyze sound, vibration, and other dynamic signals from mechanical

systems with rotating or reciprocating components. It offers flexible order energy selection in the joint time-frequency domain. Additiona

tools include plotting individual order(s) versus time or rpm, order extraction tools to separate order-specific signal components from th

acquired signal, automatic order selection tools to find and specify the most significant orders, and user-specified order selection for

analysis .

Vision/Image Processing

With IMAQ Vision for LabVIEW, engineers and scientists can create and prototype machine vision applications that use color pattern

matching. Color pattern matching quickly locates known reference patterns in a color image and overcomes roadblocks presented by

traditional monochrome cameras that have difficulty discerning color images. In addition, IMAQ Vision software adds high-level machine

vision and image processing to LabVIEW. You can use IMAQ Vision in machines as well as factory and laboratory automation operation

that require extremely reliable high-speed vision systems.

LabVIEW users can take advantage of the National Instruments Vision Development Module for developing machine vision and scientif

imaging applications. The module includes IMAQ Vision Builder, an interactive environment used to quickly prototype vision application

without programming, and IMAQ Vision, a library of powerful functions for image processing. IMAQ Vision Builder and IMAQ Vision are

integrated to simplify vision software development. IMAQ Vision Builder can automatically generate an IMAQ Vision LabVIEW block dia

that contains the same functionality as the series of operations prototyped in IMAQ Vision Builder. Users can integrate the diagram into

automation or production test application, which may include motion control, instrument control, and data acquisition.

PID Control

The LabVIEW PID Control Toolset adds sophisticated control algorithms to control applications. By combining the PID and fuzzy logic

control functions in this toolset with analysis functions in LabVIEW, users can quickly develop programs for automated control. In addit

by integrating these control tools with NI data acquisition hardware, users can create powerful, robust control systems. These LabVIE

control application can then be combined with the LabVIEW Real-Time Module for real-time control applications.

Simulation

The National Instruments LabVIEW Simulation Interface Toolkit gives control design engineers a seamless link between LabVIEW and

MathWorks Simulink software. With these integrated tools, engineers can effortlessly take an idea from a software concept to real-wo

prototyping. The toolkit includes LabVIEW-based user interface components that plug into the Simulink environment as well as tools t

work with The MathWorks Real-Time Workshop to import control models into LabVIEW. Engineers can then take these models and

integrate them with a wide variety of I/O.

LabVIEW users can also take advantage of the LabVIEW System Simulation and Design Toolset, which provides tools to design, simulanalyze, and optimize linear and nonlinear control systems. With these tools, users can accelerate system design by using VIs modeled

after control engineering symbols, such as H(s) for transfer function, 1/s for integration, z for delay, and more. After verifying the syste

design, users can quickly integrate LabVIEW analysis functions and DAQ hardware to implement a real-world system.

Conclusion

With the power and flexibility of todays computers, engineers and scientists have an unprecedented ability to efficiently measure, cont

monitor, diagnose, automate, test, and characterize any process. This however is not possible, without the ability to look at data and ex

useful information.


9 22.10.20


9/9

National Instruments Corporation ContactInformation

National Instruments Corporation

11500 N. Mopac ExpwyAustin, TX 78759-3504

Customer Service: 800-433-3488

Fax Number: 512-683-8411

Web Site: http://www.ni.com

National Instruments LabVIEW and the integrated analysis functions it provides, make up a powerful graphical application developmen

environment designed specifically for engineers and scientists. LabVIEW provides solutions regardless of industry or area of focus with

the engineering process, from design and validation to production.

In addition, LabVIEW offers unparalleled connectivity to plug-in DAQ devices and stand-alone instruments for acquiring data. LabVIEW

provides powerful analysis libraries, routines, and algorithms that range from basic math to advanced signal processing, for both gener

purpose applications as well as more vertical needs, which can be seamlessly integrated with all other functions in LabVIEW. These

functions, in conjunction with powerful data visualization capabilities, make LabVIEW the ideal tool for any application.

Appendix

The following are links that further provide information about LabVIEW-based analysis:

National Instruments Analysis Web page ni.com/analysis

The Signal Processing Toolset ni.com/analysis/lvaddon_sigprocess.htm

The LabVIEW Sound and Vibration Toolset ni.com/analysis/sound/toolset.htm

The LabVIEW Order Analysis Toolset ni.com/analysis/sound/order.htm

LabVIEW-based image acquisition and analysis, as well as machine vision application development ni.com/vision

The LabVIEW PID Toolkit sine.ni.com/apps/we/nioc.vp?cid=1394&lang=US

The LabVIEW Simulation Interface Toolkit sine.ni.com/apps/we/nioc.vp?cid=11763&lang=US

The LabVIEW System Simulation and Design Toolset sine.ni.com/apps/we/nioc.vp?cid=1391&lang=US

Read more articles

Read more Application Notes from National Instruments Corporation


labview for measurement and data analysis

Documents