Kreepy Krauly:

solutions to some common issues

Kreepy Kraulies have become synonymous with automated pool cleaning systems.

As one of the most renowned automatic cleaners around, Kreepy Krauly has actually become part of the suburban vocabulary. Especially for young children, who love to think of them as pool monsters or moving markers for pool games.

While largely efficient and effective, there are a few occasions when Kreepy Kraulys appear to have a mind of their own. Here is a quick guide to resolving some of the more common issues with the minimum of fuss and expense.

If you notice air bubbles at the return line and your Kreepy Krauly has slowed down or even stopped:

Check for leaks in the hose

Also check the pump basket lid for any cracks or wear.

Ensure the vacuum connection is underwater. You don’t want any air entering the system

Make sure the vacuum plate is firmly fitted over the skimmer box and is fixed in a submerged state by a locking bar

Check the water level of your pool, is it too low? Is the skimmer box sucking air?

Kreepy Kraulies are usually defined by their continuous movement, if you notice that your Kreepy Krauly is conspicuously still:

Check that the connection between the hose and the Kreepy Krauly is secure. This can impact the suction line.

Pool pumps and filter systems have to be a certain size to function properly with a Kreepy Krauly. Check that they are the suitable size for the job.

Check to see if there is debris in the Kreepy Krauly flapper, in the filter or basket.

Ensure that the only suction line that is open is the one that is attached to the Kreepy Krauly.

Have you noticed that your Kreepy Kraulies have a tendency to creep around just one end of the pool?

It may sound silly, but you should check if the hose is long enough for your Kreepy to reach the other end of the pool. To function effectively, your Kreepy Krauly needs about one metre of slack at all times.

Ensure the hose is balanced correctly

Check that there are no kinks in the hose. This is obviously a simple to resolve, but problematic issue if overlooked.

If the return water line is off, re-direct with an eyeball diverter.

If the Kreepy Krauly seems to be hovering at the water’s surface or in pulling air from the surface:

There should be a dive float restrictor on your Kreepy Krauly, check that it is installed. Also check that the dive float mechanism is operating freely.

Operating speed is key, ensure that your Kreepy Krauly is moving at the appropriate speed of approximately 3 metres per minute

Check if the automatic regulator valve is clogged. Sometimes debris can cause issues. Also make sure the valve is installed properly

While you don’t want the water line to drop too low, you also shouldn’t overfill your pool. The Kreepy Krauly will naturally go to the top of the water line and it may get stuck or start drawing air.

There are a number of other issues that may arise with your Kreepy Krauly, many of which can be easily solved. Consult your instruction manual or local pool maintenance store for any further questions.