introduction+final

129
Chapter # 1 INTRODUCTION 1

Upload: syed-ahsan-raza

Post on 10-Feb-2017

124 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: INTRODUCTION+final

Chapter # 1

INTRODUCTION

1

Page 2: INTRODUCTION+final

1.1. INTRODUCTION

The system for recording the data and maintaining the inventory in an

organization is the part of inventory management and control system.

The inventory is some thing which we have to hold for the manufacturing of

goods/products also every thing which is hold in the organization and capture some

space is included in the inventory.

Example

a. Raw material

b. Machinery

c. Medicines, etc.

Any item which is used in the organization or linked with the organization and

continually recorded /maintained is called inventory.

The Soda Ash Plant is located in the northern part of Punjab at Khewra,

District Jhelum. The initial work of setting up a soda ash plant at Khewra site dates

back to 1929, however, commercial production began in 1944. The original capacity

of the plant was 18,000 tons per annum that has increased to 200,000 tons per annum

through a number of expansion projects. The plant is currently meeting about 80% of

the Country's requirement for Soda Ash, and by using locally made equipment and

raw materials, provides savings to the Nation's foreign exchange reserves.

Soda Ash is an essential raw material used in the manufacturing of Glass,

Detergents, Caustic Soda, Soap, Paper, Textile, Water Softener, Petroleum, Washing

and Laundry Soaps.

The major raw materials used in the manufacturing of Soda Ash are Salt,

Limestone and Coke. Salt and Limestone are locally available at Khewra, in

abundance, whereas Coke is procured from the Pakistan Steel Mills, Karachi. Other

essential requirements are Natural Gas, Furnace Oil, Ammonia and Water.

2

Page 3: INTRODUCTION+final

The product range was diversified in 1995 with the commissioning of a 10,000

MT Refined Sodium Bicarbonate Plant. The basic raw materials for its manufacture

are soda ash and carbon dioxide, both of which are available at the Khewra Works.

The Soda Ash Business strives for continuous improvement of its already excellent

SHE (Safety, health & environment) record. This commitment is demonstrated by the

prime position given to SHE in all aspects of Business operations, and the programs

in place. In 1998, ICI Pakistan was the joint winner of the Chief Executive's Safety

Award through the Soda Ash submission of ‘SITARA', safety through teamwork. The

quality initiative was first introduced at the Soda Ash Business in 1985 with a

fundamental part of ‘Total Quality' being the implementation of management systems

based on the principle of prevention. Subsequently, the process of Quality

Improvement Teams was introduced, which improved the quality of the products and

operating efficiencies. Currently, the Business is working to implement International

Quality Standards (ISO-9002) in all areas of its activities.

The Soda Ash Business employs 472 permanent Staff and has 2500 people

who work as Contractors and Suppliers. Most of the permanent employees are

provided housing facilities on the Company's well-developed residential estates.

Other facilities like the Winnington School, Alkali Sports Club, Winnington Club,

hockey & football grounds, squash courts, 20 beds Winnington Hospital, with a full

time Medical Superintendent and a Lady Medical Officer supported by visiting

specialists and a well trained paramedical staff, are also availed by the employees. As

part of its community development initiatives, the Business routinely extends support

to local schools, colleges, parks and other institutions in the area.

Throughout its history, ICI has been at the forefront of scientific discovery and

developing inventions for the marketplace with products such as fertilizers, plastics,

man-made fibres, anaesthetics, heart drugs, herbicides, pesticides, commercial

explosives, waterborne paints, reactive dyes and biodegradeable plastics.

In 1993, ICI demerged its bioscience businesses of pharmaceuticals,

agrochemicals, specialties, seeds and biological products into a separate, publicly

3

Page 4: INTRODUCTION+final

listed company, Zeneca Group PLC – a demerger which released substantial value for

ICI shareholders. Zeneca later merged with Astra to form Astra Zeneca PLC.

Four years later ICI made its biggest ever acquisition when it purchased four

businesses from Unilever - National Starch, Quest, Unichema and Crosfield - for $8

billion. These operations were merged into ICI to form the basis for the

transformation of ICI into the world's leading specialty products and Paints Company.

Since that acquisition, ICI has been divesting its cyclical bulk chemical

businesses for value to new owners who are keen to grow and invest in those sectors.

Since mid-1997 ICI has made acquisitions totaling some GBP 5.7 billion and made

over 50 divestments totaling more than GBP 6.1 billion. Divestment proceeds have

been used to repay debt and restore the strength of the balance sheet.

Each business in the ICI Group is responsible for its own research and

technology resources and for driving innovation to meet the needs of its customers

and markets. The strengths of businesses in specific areas such as coating science in

Paints, polymer chemistry in National Strach, and sensory science in Quest, support

the prime technology platforms of ICI Group, namely biosciences, chemistry and

catalysis, and materials. These platforms (or megathemes) constitute a portfolio of

projects, which accelerate long-term technology development of the Group, and avoid

business duplication while reducing individual business risk.

The Senior Vice President R&T is supported by a Group Technology Office,

whose role is to facilitate cross business interactions, aid strategic research planning,

coordinate corporately funded programmes and identify external technology

opportunities.

There are two corporately sponsored programmes comprising:

1. Business Link for cross business technology development, and

2. Strategic Research for cross business technology exploration with academic

partners.

4

Page 5: INTRODUCTION+final

1.2. PROBLEM STATEMENT

As per the projects, my main emphases will be on the inventory of items that

how to process it in the system and controls the need of inventory and the relation of

inventory with the respective departments there is also a comparison statement and

analysis on there previous inventory management system and now which they are

going to inaugurate.

The main concern for this project is that, what is the need of effective

inventory management and control system and is it works for the organization?

In the ICI Soda Ash business there is too much inventory in use and controlled

in different departments. There is a strong inventory management and control system

but there are few problems in waste of inventory/stock and final use also the software

installed (MAXIMO) is not supporting to all the departments.

The inventory management and control system in ICI Soda Ash is fully

automated company Also it is one of the companies who are going to implement ERP

and compared to national organizations it is many a times better but as discussed there

are few problems.

So these few problems gave rise to the need of an effective and efficient

inventory management and control system. The main emphasis of the project will be

on the comparative study of inventory management with in the organization and on

information management system.

1.3. OBJECTIVES

Inadequate control of inventories can result in both under and over stocking of

items. Under stocking results in missed deliveries, lost sales, dissatisfied customers,

and production bottlenecks; overstocking unnecessarily ties up funds that might be

more productive elsewhere.

5

Page 6: INTRODUCTION+final

Inventory management has two main concerns. One relates to the level of

customer service that is to have the right goods, in sufficient quantities, in the right

place, and at the right time. The other relates to the cost of ordering and carrying

inventories.

The overall objective of inventory management is to achieve satisfactory level of

customer service while keeping inventory costs within reasonable bounds. Towards

this end, the decision maker tries to achieve a balance in stocking. The two

fundamental decisions that must be made relate to the timing and size of order i.e.,

when to order and how much to order.

1. Knowledge of lead times and lead time variability.

2. Reasonable estimates of inventory holding costs, ordering costs, and shortage

costs.

3. A classification system for inventory items.

4. To give a new idea about the inventory management and control system to the

newly manufacturing businesses mainly in Pakistan.

5. Give idea that how to analyze which inventory management system is good

for the organization and what points are keenly seen for this purpose.

6. To find out the problems of previous system and at the same time the need of

new system.

7. To prove myself a good researcher and capability to work hard.

1.4. SIGNIFICANCE OF THE STUDY

In Pakistan there is not good transportation system and a traditionally imports

the machinery and most of the raw material. So, there is a need to know that what

kind of inventory management system is good for organization and how to control

inventory. As, ICI Soda Ash is a multinational company and for the manufacturing of

soda both imported and regional material is used so one can easily analyze that how

can control inventory and which kind of inventory system is good. This research is

helpful for those organizations which are newly based manufacturing concerns or raw

material holding companies and wants to implement new software of inventory. This 6

Page 7: INTRODUCTION+final

study guides a lot to those industries which are seeking for improvement and having

expansion plan.

1.5. SCOPE OF THE STUDY

Now a day in the global world competition the organizations are facing tight

competition. To avoid that and make the good position in the market they have to

reduce their costs. The main cost which can be compensated and bit avoid is the

inventory management/material management cost.

As, this paper involved a through study of comparative inventory control &

management system of a well organized multinational Company i.e. ICI Soda Ash

Pakistan. ICI already have computerized system of inventory management and for this

purpose they use Australian software called MAXIMO and now they are

implementing new software SAP which is the world most expensive software. It is a

German software that worth of Rs 100 Million.

This research is also having some relationship with the departmental

treatments with the inventory management and control system of ICI Soda Ash.

This project is helpful for those companies which are manufacturing type of

business or having too much input and output of inventories.

The study in this project is limited up-to the study/working of previous system

(MAXIMO) and newly established system (SAP).

This project tells about all the aspects of inventories i.e. raw material

inventory or any inventory in stores, how to manage this? How to place this? How to

record this? How to destroy or use it etc?

There is a questionnaire about this study and all questions can resolve through

this study and also provide a line to the new organizers that how to tackle the problem

of inventory management and control system. 7

Page 8: INTRODUCTION+final

1.6. LIMITATIONS

This study is limited up-to the comparative study of two inventory

management systems, one is MAXIMO and the other is SAP inventory management

system. There is not much discussion or comparison of physical inventory

management system but, a complete study that, how to generate inventory orders,

store, and data base of inventory management in both the systems. Main concern is

with the inventory software study and analyses that, which system is more suitable.

There is nothing which is self made and nothing which is taken from financial

reports. All the data is taken from both the inventory management system, from

management staff and from the answers of questionnaire.

1.7. PROJECT OVERVIEW

Basically this project of inventory management and control system is the

degree requirement. In this project one can easily analyze the importance of better

inventory management & control system and also seen the importance of an

established system.

1.8. AIM OF THE PROJECT

This project is done with very purpose of evaluating the problems in the

inventory management and control system.

Find out the problems in inventory control and management system in ICI.

Gain some knowledge about the working system in the big organizations.

Make some relationship between different commodities to analyze the features

of different kinds of inventory.

Make a true relationship or differentiation between the different inventory

management and control systems in ICI soda ash.

To make my research skills on the best level it is the basic need.

To find out the problems of previous system and at the same time the need of

new system.

8

Page 9: INTRODUCTION+final

1.9. FEASIBILITY REPORT

I choose this project after seen about all pros & cones about its completion.

There are following feasibility reports about this project.

1.9.1. Technical Feasibility

The work is too much technical in this project as there is comparison off too

much things because, there inventory system is too large. All the things are may not

be provided in this project as there privacy policy is too much stricken. There is

nothing which is very difficult technically in this project.

1.9.2. Economic Feasibility

This project has importance in the economic means because there is a great

dissuasion about the inventory management and control system from different

prospects. As in the organizations this is in common practice so we have need to

know that, what system is easier and economical. As per the economic feasibility

there is nothing which is disturbing the working of this project but there is too much

which is there to tell us about the importance of better inventory management and

control system in economic means.

1.9.3. Operational Feasibility

To work out the different problems in the inventory management system and

differentiation of previous and new inventory management system there is need of too

much information to continue this study. There is not such kind of thing which is not

achievable if there is cooperation and coordination of my teachers and organization.

1.10. REASONS FOR SELECTING THIS THESIS

Management has two basic functions concerning inventory. One is to establish

a system of keeping track of items in inventory, and the other is to make decisions

9

Page 10: INTRODUCTION+final

about how much and when to order. To be effective, management must have the

following:

A system to keep track of the inventory on hand and on order.

A reliable forecast of demand that includes an indication of possible forecast

error.

1.11. DEFINITIONS OF THE TERMS

There are following important definitions are mentioned which are used in this

theses and have much importance.

1.11.1. Accounting Data

Accounting data is used to define G/L accounts. It includes the account name,

the account type, the currency in which the account is managed, information as to

whether an account may be posted to directly and which financial budget it is

allocated to. The accounting data is maintained in the Financial Accounting

component.

1.11.2. Purchasing document 

A purchasing document contains information such as the vendor number, the

purchase order date, the terms of delivery, the material number and the order quantity. 

1.11.3. Material document 

A material document is created when a goods receipt is posted. It includes the

posting date, the quantity delivered, and perhaps also the delivery note number and

the purchase order number the goods receipt refers to. The material document records

quantity changes.

1.11.4. Accounting document 

10

Page 11: INTRODUCTION+final

An accounting document is created when a valuated goods receipt or an

invoice is posted. It contains details of the individual postings with the account

number, posting key and the amount. The accounting document records changes in

value.

1.11.5. Plant

The plant is the fundamental organizational element in SAP where materials

are managed. In practice an SAP plant is often used to represent a production facility,

a warehouse or an operating site. Some reasons why plants are important in SAP are;

1. The quantity of inventory is tracked per plant.

2. The value of inventory is tracked per plant.

3. Each plant has its own data for material purchasing, sales and production.

4. Each plant may have its own materials requirement planning.

1.11.6. Storage Locations

Each plant may have several storage locations in which quantities of stock are

tracked.

1.11.7. SITARA

S means safety of everything (i.e.) man, machinery, time, production and

suppliers. I means improvement which is the improvement in everything as the SH&E

planning is a continuing process. T means team (i.e.) for the proper working of SH&E

department there is team work. A means audit (i.e.) after deducting a problem there is

audit for best solution and checking of the problem that why it is occurs. RA means

responsive action (i.e.) whenever there is problem in the area of SH&E what to decide

and what action could be the best.

1.11.8. Indent

11

Page 12: INTRODUCTION+final

Indent is also a kind of order but, it is for that goods/material which are not

regularly or on the bases of economic order quantity. An indent can be raised at any

time.

1.11.9. MAXIMO

MAXIMO is an accounting based Australian software and use for many

purposes e.g. inventory management & control system, job analysis and descriptions,

financial records, etc.

1.11.10. SAP

SAP is German software also used for the inventory management and control

system, job description, accounting records, etc.

1.11.11. GRN (Goods Receipt Note)

It is made when an order is received means, when received some material or

any thing which is an order, for that approval of received goods GRN is made.

1.11.12. PO (Purchase Order)

Purchase order means whenever there is need of raw material or any thing or

time come for an order, an order is executed. It is on the bases of purchase order.

1.11.13. Lead time

Time interval between ordering and receiving the order

12

Page 13: INTRODUCTION+final

Chapter # 2

LITERATURE REVIEW

13

Page 14: INTRODUCTION+final

It is better if we exclude the human factor from inventory consideration. The

most important function of inventories is insulation. A reserve of material can be

tapped whenever a delay in a preceding stage threatens to curtail operations following

stage. There are following three kinds of inventories finished goods, Raw material and

inventory in-process.

The inventory prevails in the finished goods form and ready for sale is called

finished goods inventory. The inventory which is store in the stores and is the basic

need for the production of a product and used in the product is the raw material

inventory, it is direct material. The example for that is lime stone placed in the store

and used n some future period. The inventory purchase for the use of production and

already in process is called the inventory in process.

If inventory is excessive, holding cost is too high. On the other hand, if

inventory is limited, either ordering or opportunity cost is significant. For given three

data items, ordering and holding costs and annual demand, the objective is to hold that

inventory level, which minimizes costs and satisfies daily demand without any

shortfalls.

Hamdy A. Taha, 1998 taking the concept of inventory management as, a

business or an industry usually maintains a reasonable inventory of goods to ensure

smooth operation. Traditionally, inventory is viewed as a necessary evil-too little of it

cause costly interruptions, too much results in idle capital.

Van Horne & John Wachowicz, 2001 said that, Inventories form a link

between the production and sale of a product. A manufacturing company must

maintain a certain amount of inventory, known as work-in-process, during production.

Although other types of inventory-in–transit, raw material, and finished goods

inventories are not necessary in the strictest sense, they allow the firm to be flexible,

inventory in transit-that is, inventory between various stages of production or stage-

permits efficient production scheduling and utilization of resources. Without this type

of inventory, each stage of production would have to wait for the preceding stage to

14

Page 15: INTRODUCTION+final

complete a unit. The possibility of resultant delays and idle time gives the firm an

incentive to maintain in-transit inventory. Raw material inventory gives the firm

flexibility in its purchasing, without it, the firm must exist on a hand-to-mouth bases,

buying raw materials strictly in keeping with its production schedule. Finished goods

inventory allows the firm flexibility in its production scheduling and in its marketing.

Jonathan Blain et al, 1998 presents the idea about inventory as, the inventory

is a list as well as a physical collection of material items. Inventory management

entails the planning and control of material stocks by quantity and value. It has also

come to include the planning, data entry, and documentation of all goods movements

to, from, and within the storage location in the warehouse used by the company.

Hamdy A. Taha, 1998 he said about inventory problem as, the nature of the inventory

problem consists of repeatedly placing and receiving orders of given sizes at set

intervals. From this standpoint, an inventory policy answers the following two

questions:

1. How much to order?

2. When to order?

The answer to the first question determines the economic order quantity

(EOQ) by minimizing the following cost model:

All these costs must be expressed in terms of the desired order quantity and

the time between orders.

He described the above mentioned costs as; purchasing cost is based on the

price per unit of the item. It may be constant, or it may be offered at a discount that

depends on the size of the order. Setup cost represents the fixed charge incurred when

an order is placed. That cost is independent of the size of the order. Holding cost

represents the cost of maintaining the inventory in stock. It includes the interest on

15

Total inventory

cost

Purchasing cost

Setup cost

Holding cost

Shortage cost

Page 16: INTRODUCTION+final

capital as well as the cost of storage, maintenance, and handling. Shortage cost is the

penalty incurred when we run out of stock. It includes potential loss of income as well

as the more subjective cost of loss in customer’s goodwill.

Hamdy A. Taha, 1998 describe the second answer that (when to order?) as, it

depends on the type of inventory system with which we are dealing. If the system

requires the periodic review, the time for receiving a new order coincides with the

start of each period. Alternatively, if the system is based on continuous review, new

orders are placed when the inventory level drops to a prespecified level, called the

reorder point.

Van Horne & John Wachowicz, 2001 says that, large inventories allow

efficient servicing of customers demands. If a certain product is temporarily out of

stock, present as well as future sales to the customer may be lost. Thus there is an

incentive to maintain stock of all types of inventory. Hamdy A. Taha, 1998 says that,

the inventory problem deals with how much and when to order an inventory item,

these decisions are made by minimizing an appropriate cost function that

encompasses the ordering, holding and shortage cost.

Jonathan Blain et al, 1998 tells about large stock quantities as, when a

warehouse contains a very large number of stock management units, it is possible to

manage them and conduct a physical inventory of them on the bases of samples.

Because the relationship between the sampled items and the rest of the warehouse can

be determined automatically, it is possible to infer the full warehouse inventory from

the result of physical counting the selected sample. The good receipts and issues at the

warehouse can be managed by using the same technique.

Van Horne & John Wachowicz, 2001 says that, the traditionally extolled

advantages of increased inventories, then, are several. The firm can affect economies

of production and purchasing and can fill orders more quickly. In short, the firm is

said to be more flexible, and the obvious disadvantages are the total cost of holding

the inventory, including storage and handling cost. An additional disadvantage is of

obsoleteness.

16

Page 17: INTRODUCTION+final

Jonathan Blain et al, 1998 said, when you post a movement of goods, the

value of this stock is also updated. A chain of consequent postings occurs. Also they

say each movement of material causes the system to create a document recording the

amount and values, as well as the time and date of movement. This document serves

as proof that the goods were dispatched. When the goods arrive at the destination, the

entry of the goods receipt completes the proof of the movement. They also says in his

book that, when goods are delivered that were ordered by a purchase order, the system

locates this purchase order document and proposes default data from it to form the

goods receipt documentation and If, a delivery note arrives with no reference to a

purchase order, you can lock up the possible purchase orders under the material code

or the vendor number.

Van Horne & John Wachowicz, 2001 says that, the maintenance of Large

inventories has come from an understanding of a Japanese inspired inventory control

system called just-in-time or JIT for short. JIT breaks with the conventional wisdom

of maintaining large inventory stocks as buffers against uncertainties. The basic

objective of JIT is to produce a required item at the exact time needed, or” just-in-

time”. Inventories of all types would thus be reduced to a bare minimum. Reduction

in inventory carrying cost is one of the more obvious results of the JIT system.

Jonathan Blain et al, 1998 says that, a reservation is an instrument for making

sure that this material is moved from stock to consumption at the correct moment. It

assumes that the stock will be on inventory to enable this to happen, and it assumes

that no other production order or customer order has already been promised this

quantity of material. When goods are moved from a warehouse, there has to be a

posting of material withdrawal. This triggers the posting of a reduction in the quantity

and value of the warehouse stock of this material. If some material stock is transferred

from one warehouse to another, and if these warehouses belonging to different

company codes, the financial accounting systems of both company codes must be

coordinated to reflect that something of value has moved from one to the other. The

quantity inspection may also take place after the material has been received into the

warehouse and planned for issue. In such cases, the material is transferred to quality

inspection stock on its way to the consumption location. They tells about the special

17

Page 18: INTRODUCTION+final

stock as, the essential characteristics of a special stock of a material are that it is

owned by a company or a person different from the owner of the storage location in

which it is on inventory.

Jong, 1997 and Ericsson, 1995 says Information technology provides

humanity with the ability to keep in touch without traveling, while it enables

businesses to improve efficiency and effectiveness, as well as to develop new

business.

Pine, 1992 says that, ultimately, customers ask for mass customization, for

which suppliers have to deliver products at affordable prices, with enough variety so

that nearly every customer feels that he buys a customized product.

Jonathan Blain et al, 1998 says that, each material can be selected individually

or on the bases of membership of a material group subject to last-in-first-out (LIFO)

evaluation. The material can also be allocated to a LIFO pool and valued in this

context. Also he writes in the favor that, if the moving average price (MAP) control

technique is used, the difference is posted to the stock account, where it contributes to

the average price the next time it is computed. They writes for material planning as,

the main function of material requirement planning is to monitor stock at the end of

each day and automatically generate purchase order proposals to be forwarded to the

purchasing department.

Logistics concerns the efficient, as well as the effective flow and storage of

goods, services and related information from points of origin to points of

consumption, for the purpose of conforming to customer requirements [CLM, 1991].

In logistics there are active objects which provide capacity, comprising resources for

production, transportation and storage, and there are passive objects which demand

capacity, comprising goods, information and money [Verwijmeren, 1994b].

Optimization in logistics management focuses on satisfying market

requirements, expressed in mutually agreed quality aspects, such as time, place,

quantity and condition, for minimal costs [Vermunt, 1993].

18

Page 19: INTRODUCTION+final

Jonathan Blain et al, 1998 writes that how to control stock level as, it is

Important for you to keep stock level low. Having the system automatically reorder

stock based on evidence it has collected regarding consumption and delivery enables

you to do this. The inventory management function ensures that every time a material

is taken from the warehouse, the stock level is checked to see whether it has fallen

below the reorder level. If this is the situation, an entry is made in the material

requirements planning file to generate a purchase order on the next material

requirements planning run.

Jonathan Blain et al, 1998 write about Material requirements planning (MRP)

as, Material requirements planning is normally carried out at the plant level, so all the

stock available in the plant is recognized by the planning run, whether its storage

location. The calculation of net requirements compares the forecast quantities of each

material for each period with the quantities that is expected to be available. If a deficit

is foreseen, a purchase order proposal is generated.

Jonathan Blain et al, 1998 writes about some accounts as, if an account has

been assigned in a purchase order, that amount cannot be changed if a goods receipt

that has been subjected to evaluation is entered during invoice verification. If a down

payment arrangement has been made, you receive a system message to this effect

when the invoice verification function becomes aware that you are about to enter an

invoice receipt for that order or for that vendor, if a standard agreement for a down

payment is in force. The material management-warehouse management system

supports the processing of all movements, including goods receipts and good issues

initiated by the inventory management system, as well as goods issues from the sales

and distribution system. The warehouse management system provides control over the

movements within a warehouse, including stock transfers from replenishment orders.

The transfer requirement does not execute the stock movement. A movement is

executed only if a transfer order is created and confirmed. They also say that, if you

want to know what should be moved and how much, the creation of a transfer

requirement will provide the answers. If a movement has already been started by the

confirmation of a transfer order and you try to create a transfer requirement for the

19

Page 20: INTRODUCTION+final

same goods, you will discover whether the order was created automatically or

manually, and weather an amount of the transfer has already been moved.

The need for integrated information processing across locations is increasing.

Organizations and people that previously operated in near isolation, start co-operating

in organizational networks, while hierarchical organizations are decentralizing and

become loosely coupled entities. The sharing of information is particularly needed to

improve coordination in co-operating organizations which put emphasis on

communication, collaboration, and decentralized decision making [Mullender, 1989]

[Khanna, 1994] [ITU/ISO, 1996]

Ellram, 1991 & Jones, 1985 says that, one of the ways to improve business

performance is supply chain management, which concerns the inter-organizational

management of goods flows between independent organizations. Supply chain

management is an integral approach to planning, control and monitoring of total

materials flows from suppliers to end users, aiming at improved customer service at

reduced overall costs.

Another person Harasim, 1993 said that, computer systems which are

interconnected through communication networks make up computer networks.

Computer network technology concerns the integration of computers and

telecommunication infrastructures, creating a world-wide web of computer networks.

In this era, an unprecedented progress in computer network technology is

being made. Due to fundamental innovations in electronics in the past decades, the

power of computer components has increased dramatically. The information

transformation capacity of microprocessors shows exponential growth, as the number

of transistors per chip doubles approximately every eighteen months [Clemens, 1997].

In advanced computer network technology, applications can be designed to

fully meet the desired functionality, since ample capacity is, or could be made,

available to achieve optimal effectiveness of the applications. From the perspective of

an almost unlimited information processing capacity, advanced applications heavily

20

Page 21: INTRODUCTION+final

consume processor time, memory space and bandwidth. Because computer network

technology is growing beyond traditional technical limitations, the major challenge

becomes the creation of useful applications. In the long run, the functionality and

performance of the worldwide web of computer networks seems mainly to be limited

by the creativity of mankind in conceiving new applications, and the willingness of

people to heavily invest in computer network technology [Rowe, 1995].

Advanced technology enables organizations to operate flexibly as a unit,

regardless of their locations, exchanging information between dissimilar computer

systems, amongst others about inventory levels and delivery schedules [Upton, 1996].

The business reconfiguration induced by computer network technology is an

evolutionary process, which can divide in five stages: localized exploitation, internal

integration, business process redesign, business network redesign and business scope

redefinition [Scott Morton, 1991] [Venkatraman, 1994]. Each electronic integration

enables a quasi-hierarchy or quasi-market mechanism for co-ordination of activities in

a business network by exchange of information. The information exchange in

electronic integration may reflect transactions, inventory status, process details and

eventually expertise [Scott Morton, 1991] [Venkatraman, 1994].

21

Page 22: INTRODUCTION+final

Chapter # 3

METHODOLOGY

22

Page 23: INTRODUCTION+final

3.1. TYPE OF RESEARCH

This type of study is undertaken to determine the relationship between

different inventory management systems. The study is correlative in nature and

depends upon both primary and secondary data collection. The main theme is to

understand the different inventory management systems and how to analyze their

differences for which the direct study is also used and indirect tools are also used. I

use the following tools for the collection of data.

3.2. SOURCES OF DATA

I am using the following sources for the collection of data to complete my research

and these sources are those which are not bised and giving true picture of the study.

These sources are as follow:

3.2.1. Interviews

I have conducted ten interviews for collection of data. These ten peoples are

those which are working on both the inventory software i.e. (SAP and MAXIMO) and

having good knowledge of system. The questions asking from these all peoples are

same which, can given good results for this research and one can easily analyze the

comparison of both systems.

3.2.2. Inventory software study.

For further comparison I study the both inventory software in detail, the study

is from the book of SAP R/3 and MAXIMO user manual.

3.2.3. Working on systems

I do some work on MAXIMO after taking the description from the regular

management employees, at this time the SAP is not fully installed so, I don’t work on

that practically but can take the review of that system as per requirement.

23

Page 24: INTRODUCTION+final

3.2.3. Through management staff

There is a hell of data which I collect from ICI Soda Ash with the help of

management staff. The complete theory and pattern of inventory management of both

systems i.e. SAP and MAXIMO are given by management staff. They also provide

needed information to me when I feel requirements and for the betterment of my

study.

3.2.4. Software consultants

I am interviewing and meeting with some peoples which are using the

inventory softwares and also collets some information about the inventory softwares

from internet.

3.3. PROCEDURE

3.3.1. Sample

There is no use of sampling technique for the purpose of calculation but, I take

some persons from the organization and conducting interviews and than analyzing

their comments. As there is a just analysis of two inventory software, so I can take the

interviews as a sample study and analyzing.

3.3.2. Instrument and measures/source of data

The data is analyzed on the following bases:

First collect the data about all the inventory management system and there

theory. A detailed document made and set differentiation statement. All the points

which are essential to be discussed in the comparative study collected and make clear

24

Page 25: INTRODUCTION+final

that it will be the best solution and correct data. After data collection with this set

pattern the analyzing points made on the bases of difference in both the systems

3.4. DATA

3.4.1. Coke Scenario

The under mention steps will be followed for the production Coke related

scenarios only.

For Coke purchasing in ICI:

 

Step.1 Requisitioned will create a Purchase requisition of Unsorted Coke.

Step.2 Purchasing department will generate a Purchase Order with reference to

Purchase requisition.

Step.3 Partial or full Good receipt will be entered against that Purchase order.

Step.4 According to Goods receipt quantity and value, Invoice and payment will be

done.

Step.5 After screening or sorting the unsorted coke, it will be transfer into Sorted

coke and into Undersized.

 

For understanding, take the following example.

 

For Example:

Step.1

Suppose the following are the Stocks and the values of unsorted coke, sorted

coke and Undersized

 

 

 

 

 

25

Page 26: INTRODUCTION+final

Step.2

Now a Purchase Order of Unsorted coke is created

Purchase order # : 4500000036

Material : Unsorted Coke

Quantity : 1000 Ton

Unit Price : 15 PKR

Value : 15000PKR

Step.3

Entered Goods receipt for full quantity and value

Step.4

Now Stock Status of Unsorted coke

 

 

 

 

 

Step.5

Now physically 100 Ton of Unsorted coke is sorted. Out of 100 Ton, 80 ton is

converted in Sorted Coke and 20 Ton is identified as Undersized.

Now transfer posting is entered from Unsorted coke (100 Ton) into Sorted coke (80

Ton) first then Undersized (20 Ton)

Step.6

When 80 ton is transferred from unsorted coke to Sorted coke then the Stock

status is

 

 

 

26

Unsorted Coke

Stock = 1100 TonValue = 16000 PKRMAP = 14.55 PKR

Sorted Coke

Stock = 50 TonValue = 600 PKRMAP = 12 PKR

Undersized

Stock = 25 TonValue = 125 PKRSP = 5 PKR

Page 27: INTRODUCTION+final

In this Transfer, SAP system credit Unsorted Coke stock account with -

1164(80x14.55) and debit Sorted Coke Stock account with +1164

Step.7

Then 20 ton is transferred from unsorted coke to Undersized, and then Stock

Status is

 

 

 

 

In above transfer, SAP system credit Unsorted coke with –291(20x14.55) approx. and

debit Undersized with +100(20x5) while the Remaining value 191 approx. will be hit

in a separate G/L account known as Expense/revenue from stock transfer.

 

3.5. OLD SYSTEM (MAXIMO)

MAXIMO is basically Australian software worth Rs. 20 million, installed in

ICI Khewra in January1988, under the version of 3.0A with Oracle version 7 and was

later upgraded in November 1999, with version 4.1 under Oracle8, so basically Oracle

8 is working to maintain the databases.

MAXIMO is among some of those software and application, which at present

have been installed at ICI Soda Ash. MAXIMO is a complete ERP solution. At

present there are three servers working for ICI Soda Ash. Out of these three servers,

one separate server is solely for MAXIMO applications. MAXIMO performs the

following functions:

27

Unsorted Coke

Stock = 1000 TonValue = 14545.45 PKRMAP = 14.55 PKR

Undersized

Stock = 45 TonValue = 225 PKRSP = 5 PKR 

Page 28: INTRODUCTION+final

Up dating of records

Inserting of records

Deleting of records:

MAXIMO also provides on-line services to the management. MAXIMO

provides all the relevant information by maintaining the security. The user can access

particular information by using particular code.

Oracle 8 is quicker and easily accessible and further it provides all the

information about particular queries. Provide Security options to access the

MAXIMO functions.

3.5.1. Functions of MAXIMO

Areas of MAXIMO activities include the following:

1. Plant Maintenance

2. Purchase

3. Inventory Control

3.5.2. Purchase

MAXIMO has to define the purchases being made locally or imported. For

this the following sub tasks are:

28

INDENT PLANNING Purchase Requisition PURCHASE

Purchase Order

STORE

Goods Received Note (GRN)

Page 29: INTRODUCTION+final

Explanation:

The above figure shows the purchase process of ICI Soda Ash. If there is

shortage of any kind of material or equipment the system automatically raises the

indent. With that indent all the details relating to the specified product is written like

vender, cost, size, type etc. with that one thing more is given that is priority of product

if the product has high priority it will purchased without goes to planning department.

If that is not an important thing then is go to planning department and they

issue purchase requisition and after that on the basis of that requisition the purchase

department generates three carbon copies of PO, one copy of it goes to vender, one

with purchase and one to finance. After that vender sends goods along with bill so

after inspection and all formalities a GRN (goods receipt note) is generated by store

and the items are known part of inventory. That is how it works. All the documents

are generated through system and can be tracked at any time. So we can say that it’s a

module of ERP.

3.5.3. Inventory Control

This function of MAXIMO actually relates to the stores. It keeps the records

of things issued from the stock, items added back to the stock, and new items added

into the inventory. It maintains 21000 items of engineering store and also maintains

IT store, Admin store, Stationary store, and hospital store. The basic function of the

inventory control is to maintain the inventory of items and also re-order level of

items.

In order to get any thing issued from the store, a Requisition Slip for that

particular thing is required. The storekeeper will issue those things to the department

concerned and will perform the entry in MAXIMO. The original stock will

automatically get reduced.

29

Page 30: INTRODUCTION+final

3.5.3.1. Inventory Control - Add a New Item to a Store

1. Click on the Inventory Control Application from the Inventory Module of the

MAXIMO Main Menu.

2. Click on the Insert / New button of toolbar.

3. Enter a valid Item Code in the Item Field.

4. Enter Description of the Item. Double Clicking on the Description will open

the Long Description box. Complete detailed description of the item should be

entered here.

6. Enter Type. Double clicking on this field will pop up a list of values from

which selection can be made.

7. Enter Responsible Section. Double clicking on this field will pop up a list of

values from which selection can be made.

Important: All items must have a Responsible Section Identified. If

Responsible Section is missing then GRN for the item cannot be generated

8. Deferred to Date field should be empty. This field is filled only in case the PR

for the item is to be blocked. The field is only valid for items which have a Re-

order Quantity.

9. Enter Standing Rate to indicate if the item has a standing (running) rate

contract. This is a Y (yes)/N (no) field. Double clicking on this field will

toggle the value between Y and N. Y means that the item has a standing

(running) rate contract.

10. Enter Supply Type. Double clicking on this field will pop up a list of values

from which selection can be made.

11. Enter Location (store room where the item will be located). Double clicking

on this field will pop up a list of values from which selection can be made.

12. Enter Default Bin.

30

Page 31: INTRODUCTION+final

13. Enter Category. Double clicking on this field will pop up a list of values from

which selection can be made. Valid Values are:

STK Stocked Items (items with Re-order quantity specified)

NS Non-Stock Items (items with no Re-order quantity specified)

SP Special Order Items (items which are not generally kept in the store and

are a one time purchase)

14. Specify Reorder Level, if required.

15. Specify Minimum Qty.

16. Enter Issue Unit. Double clicking on this field will pop up a list of values from

which selection can be made.

17. Enter Supplier Code of a Preferred Supplier in the Supplier Field. Also specify

Model, if any.

18. Specify Reorder Qty.

31

Page 32: INTRODUCTION+final

19. Specify Order Unit. Double clicking on this field will pop up a list of values

from which selection can be made.

20. Specify Lead Time (Days).

21. Specify Unit Conversion Factor to convert Order Units to Issue Units.

Important: Ensure the following:

a. While adding a new Item in MAIN store, the same item must

be added to:

SHUTDOWN Store

CAPITAL Store

INSPECTION Store

b. While adding a new Item in LAB, STATIONERY, HOSPITAL

stores then the same item must be added to:

INSPECTION Store

Caution: For SHUTDOWN, CAPITAL and INSPECTION Stores set:

a. Category = NS (Non-Stock)

b. Reorder Level = 0

c. Reorder Qty = 0

d. Minimum Stock = 0

3.5.3.2. Adding an Existing Item to a New Store

1. Click on the Inventory Control Module from the Inventory Icon of the

MAXIMO Main Menu.

2. Enter the Store code of the Existing Item in the Item Field and press Enter.

3. Enter Location of Storeroom in which the Item already exists.

4. Click on Add Item to Storeroom Location from the Options Menu.

5. Add Item to Storeroom Location window will pop-up. Specify the new

Storeroom Location in the New Location Field

6. Add bin information of the new store in the Default Bin Field for the new

Storeroom

32

Page 33: INTRODUCTION+final

7. If other information relating to the item is the same as specified in an existing

storeroom then enter the name of the existing store in the Copy from Existing

Location Field.

8. Click on the Save Button to add the item in the new storeroom.

3.5.3.3. Resetting Reorder Levels for a Store Item

1. The Inventory Control Module does not allow the Re-order Quantity of an

item to be set to Zero. In case the re-order quantity of an item has to be set to

zero then select Other Applications from the File Menu in the Inventory

Control Module.

2. Select CHNGEINV (Change Ordering Levels) from the pop-up window and

Click on the Run Button.

3. A Logon Box will appear.

4. Enter User name and Password and click on the Connect Button.

5. Enter Store Location and press the Tab key.

6. Enter Item Code; on pressing the Tab key, Minimum and reordering

information of the item will be displayed.

7. Change, Minimum Stock Level, Re-order Level and Re-order Quantity as

required.

8. After ensuring that the correct values have been entered, click on the Update

Inventory Button.

9. To Exit the module Click on the Exit Button.

3.5.3.4. Material Receipts

1. Material Receipts can only be made for items which have a PO with 'APPR'

status.

2. Click on the Material Receipt Module in the Inventory Icon of the MAXIMO

Main Menu

3. Enter PO Number for which items have been received.

33

Page 34: INTRODUCTION+final

4. Click on the Materials Icon to go to Receipt Screen. If any material has been

received prior to the current session and the material is still pending inspection

then these receipt transactions will be shown on the screen.

Note: The screen will be blank if no material has previously been received or

the previously received material has been inspected and the GRN posted

5. Enter the correct Received Date at the bottom of the screen. The field defaults

to the System Date and can be changed if the material was received on a

previous date.

6. Enter the Consignment Number on the Bottom of the screen. The format is as

follows:

Bilty Number * Truck Number * Total Weight

It is imperative that this format is strictly followed. The following rules apply:

a. If bilty number is not available, then the letters 'NB' should be entered

as the Bilty Number

b. If truck number is not available then it can be left blank

c. Total Weight must be mentioned in Kilograms

34

Page 35: INTRODUCTION+final

d. The Slashes ('*') are important and the program will not accept any

other format.

Examples of Valid Consignment Numbers are as follows:

a. TR345 * GLT 3456 * 5000

b. NB * 1000 * 5000

c. NB * * 200

Important: The Bilty Number is vital for the production of the Bilty Report

every day, any mistake in entering the proper information will result in

erroneous report for Octroi matching by the Purchase Personnel.

Make sure that all corrections to the entries are made before the Save Button is

clicked. The program does not allow editing previously Saved Entries.

7. Enter the Challan Number on the Bottom of the screen if available. The format

is as follows:

Challan Number * Challan Date

35

Page 36: INTRODUCTION+final

The Slashes ('*') are important and the program will not accept any other

format.

Important: If this format is not properly followed then the Challan Number

and Date will not appear on the GRN.

8. Enter the PO Line number of the Item that is currently being received in the

Line # Column. On hitting Tab or moving the cursor to the next field, the

program will copy the Item code, Description, Consignment #, Remaining

Quantity to be delivered, Challan #/Date, Storeroom Location on the line.

9. Ensure that the following is correct:

a. Quantity. Quantity defaults to the remaining quantity to be delivered

and can be different from the current receipt

10 Repeat steps 8, and 9. Till all the receipts have been entered.

11. Click on the Save Icon to save the transactions.

[[

Important: The program will not allow any edits to Saved Transactions.

12. If PO Line number are not readily available then click on the Select Ordered

Items from the Options Menu in the Receipt screen. This will display all the

items on the PO. Select all the items that have been received in the current

delivery and Click on the OK button. This will have the same effect as in Step

8. All other rules and restrictions apply as stated above.

Note: If Items that have been classified as Rotating Equipment are being

received, then after Step 8. Or 12 a window will pop up and ask for the new

rotating equipment numbers. These numbers have to be unique and proper

care should be taken that no wrong number is entered. This will then create an

equipment record in the Equipment module.

3.5.3.5. GRN Generation

1. A Goods Receipt Note (GRN) is generated for all material receipts.

2. GRN can be generated through Auto or Man. GRN Modules.

36

Page 37: INTRODUCTION+final

3. The Auto GRN Module generates GRNs for all material receipts for which no

GRN have previously been generated.

4. Click on the Auto GRN Button in the Material Receipt Module to initiate the

Auto GRN process.

5. Click on the Start Process Button to generate the GRN.

6. Click on the Man. GRN Button in the Material Receipt Module to initiate the

Manual GRN process.

7. Enter the PO numbers for which GRN has to be generated.

8. Click on the Save Button after all PO Number have been entered. If any PO

Number has to be deleted from this list click on the Stat Check Box alongside

the list and that PO Number will not be included in the Manual GRN Process

9. Click on the Start Process Button to generate the GRN

10. All receipts are grouped by PO Number and Item Wise Responsible Section

and individual GRNs are generated for each group

11. When the process is complete a summary is displayed showing the total

number of GRNs generated and the numbers of the First and Last GRN37

Page 38: INTRODUCTION+final

12. The GRN generated through both the Auto and Man. GRN process can be

printed using the GRN Report.

3.5.3.6. Correction to Material Receipt Entries

1. Entries made in the Material Receipts Modules cannot be edited after the

transaction has been saved. To remove errors in entry of quantity for a

material receipt the following procedure should be used. This procedure will

also correct the corresponding GRN.

This procedure can correct quantity errors for only those receipts whose GRN

has not been approved.

38

Page 39: INTRODUCTION+final

2. Click on CORRECPT from the Other Application Window in the File Menu

of the Material Receipts Module

3. Enter Login ID and Password.

4. Enter PO Number.

5. Enter PO Line Number.

6. When the cursor is moved to the Item Number field, a list of material receipts

entries against the PO Number/Line which are still to be inspected is

displayed. Select the line whose quantity has to be corrected.

7. The following fields are filled automatically based on the information already

provided:

Date received

Store Location

GRN Number / GRN Line Number

GRN Status

Old (Original) Receipt Qty

39

Page 40: INTRODUCTION+final

Unit Cost

Old (Original) Line Cost

8. Enter New Receipt Quantity.

9. New line cost based on the new receipt quantity is computed and displayed in

the respective field.

10. Click on the POSTING Button after ensuring that the New Receipt Quantity is

correct.

11. In case of wrong entry Click on the CLEAR Button to clear the screen.

3.5.3.7. GRN Approval

1. After inspection of materials the GRN has to be:

a. updated to reflect the accepted and rejected quantities and

b. posted to update the store current balances

2. For Imported POs the following information is required before posting

a. Currency exchange rate

b. Handling Charges in Pak Rupees

3. If the GRN includes items that have been classified as rotating items then on

approval of the GRN the Equipment record is automatically updated to reflect

the proper storeroom location of the equipment.

4. To initiate the GRN approval and Posting module Click on the Approve GRN

Button in the Material Receipt screen.

5. Enter the GRN number.

6. Update the Accepted Quantity Column. If the Accepted Quantity is less than

the GRN Quantity than the balance will show in the Rejected Quantity

Column and a Rejection code will have to be entered. The Rejection code can

be selected from a pop list.

7. Additional Comments upto 50 characters can be added.

8. Click on the Save Button to save the updates.

9. Update Exchange Rate in case of Imported POs.

10. Enter Handling Charges, if any

40

Page 41: INTRODUCTION+final

11. Click on the Approve Button to recompute the new GRN base cost based on

the new Exchange Rate and Prorate the Handling Charges on all the line items

for which the Accepted Quantity is greater than zero.

12. After ensuring that all values have been properly updated click on the Posting

Icon to post the GRN.

Important: For Imported POs, it is essential that Currency Exchange Rate and

the Handling Charges have been added to the GRN before posting

Once a GRN has been posted the changes CANNOT be reverted back.

13. In case of rotating items in a GRN, after the posting process is complete the

system will display a list of Equipment Numbers that have been allocated to

the Equipment. It is imperative that the same numbers be punched physically

on the equipment.

41

Page 42: INTRODUCTION+final

3.5.3.8. GRN View

1. GRNs in either Waiting for Approval ('WAPPR') or Approved ('APPR') Status

can be viewed on the screen by using the View GRN Module.

2. View GRN Module can be initiated by clicking on the View GRN Button in

either the Inventory Control or the Material Receipts Module.

3. GRN information can retrieve by specifying any one or a combination of the

following fields:

GRN Number

PO Number

Responsible Section

Supplier

Status

3.5.3.9. Material Issues

1. Material issues should only be made on the basis of approved requisition slips.

2. Two types of requisition slips can be used for withdrawal of materials from

the stores:

Manual (Hand written requisition on pre-printed requisition book same as

prior to MAXIMO installation)

Requisition slip generated by MAXIMO (Computer printout)

3. In both cases a Valid Cost Centre/Capital Special Job Number and signature of

Approving Manager will be required on the Requisition Slip.

Important: Costs against a piece of equipment/location can only be accrued if

the requisition slip is generated through MAXIMO.

4. Click on the Issues and Transfers module from the Inventory Icon of MAXIMO

Main Menu.

42

Page 43: INTRODUCTION+final

5. Enter the Storeroom Location from which the issues are to be made.

6. Enter Issue To in the field at the Bottom of the Screen

7. Enter Transaction Number at the Bottom of the Screen.

8. In case of hand written requisition slips, enter the following information in the

respective columns:

a. Item Number

b. Quantity

c. Debit GL Account (Cost Centre/Capital Special Job Number)

Click on the Save Icon to record the issue.

9. In case of MAXIMO generated slips the following steps need to be performed:

a. Click on Select Reserved Items in the Options Menu. This will open

windows with all the current reservations being displayed.

43

Page 44: INTRODUCTION+final

b. Enter the Work Order/Store Req. Number in the Selection Criteria

field and click on the Refresh Button.

c. Only items reserved against the Work Order/Store Req. will be

displayed.

d. Select item(s) to be issued and click on the Copy Button.

e. Click on the Close Button when all items to be issued have been

selected and copied.

f. Change the Quantity as required for each item

g. The Transaction Number, Work Order, Debit GL Account, Location,

Equipment columns will be filled.

Click on the Save Icon to record the issue.

Important: Add Debit GL Account if missing.

Extremely Important:

All Transactions are being done on an On-Line, Real Time System and all

entries are auditable. Extreme Care should be taken before posting of any transaction.

All discrepancies in Item Store Codes, Quantities, Values, Ambiguity in Descriptions

should be resolved before making any transaction.

All transactions when SAVED cannot be altered or deleted. However, the

system provides facilities for adjustments in case of correction of wrong entries.

3.5.3.10. View Issue / Return Transactions

1. Select Other Applications from the File Menu in the Issues and Transfers

Module.

2. Select VIEWISSUE (View Issue / Return Transactions) from the pop-up

window and Click on the Run Button.

3. A Logon Box will appear.

4. Enter User name and Password and click on the Connect Button.

44

Page 45: INTRODUCTION+final

5. Enter Transaction number and press the Tab Key

6. If any transaction has been saved with the specified number in the current

month, then these transactions will be displayed in a pop-up box.

7. If multiple transactions have been saved using the same Transaction Number

then all the transactions will be displayed.

8. Highlight the transaction in the pop-up box and click on the OK Button.

9. To Exit the module Click on the Exit Button

3.5.3.11. Delete Issue / Return Transactions

1. Select Other Applications from the File Menu in the Issues and Transfers

Module.

2. Select DELISSUE (Delete Inventory Issue / Return Transactions) from the

pop-up window and Click on the Run Button.

3. A Logon Box will appear.

45

Page 46: INTRODUCTION+final

4. Enter User name and Password and click on the Connect Button.

5. Enter Transaction number and press the Tab Key

6. If any transaction has been saved with the specified number in the current

month, then these transactions will be displayed in a pop-up box.

7. If multiple transactions have been saved using the same Transaction Number

then all the transactions will be displayed.

8. Highlight the transaction in the pop-up box and click on the OK Button.

9. After confirming that the selected transaction has to be deleted, click on the

Delete Record Button.

10 To Exit the module Click on the Exit Button.

3.5.3.12. Material Returns

1. Material Returns can be made at:

a. the prevailing store average cost of the item

b. at a value other than the store average cost46

Page 47: INTRODUCTION+final

2. Click on the Inventory Return Button in the Inventory Control Main Screen

3. Enter the User Name and Password

Important: Inventory Return is a Password Secured Application and only

authorized personnel are allowed to enter Return Transactions.

4. Select the Store Location from Dialogue Box.

5. Enter Item Code; if the item code is valid the description of the item will be

displayed when the cursor is moved to the next field.

Note: A complete listing of the Item Codes can be viewed by pressing the F9

Function Key.

6. Enter Cost Code or Capital Job Code in the Cost Code Field to which credit

has to be given.

Note: A complete listing of the Cost and Capital Job Codes can be viewed by

pressing the F9 Function Key.

8. If the item being returned is either a Motor, Pump, Gearbox or Compressor

than its Equipment Number must be entered in the Equipment # Field.

47

Page 48: INTRODUCTION+final

8. Enter Return Quantity.

Important: Return Quantity cannot be zero or less than zero.

9. Enter Return Value. The field defaults to the current average value of the item.

This value can be changed to any value other than negative values. The current

average value of the item is constantly displayed in the Current Average Field

for reference.

10. Enter remarks in the Special Comments Field, if any

11. After ensuring that the values specified above are correct, click on the Posting

Button to make the Return or the Exit Button to cancel the transaction.

3.5.3.13. Material Adjustments

1. Click on the Inventory Adjustment Button in the Inventory Control Main

Screen

2. Enter the User Name and Password

Important: Inventory Adjustment is a Password Secured Application and

only authorized personnel are allowed to enter Adjustment Transactions.

3. Select the Store Location from Dialogue Box.

4. Enter Item Code; if the item code is valid the description of the item will be

displayed when the cursor is moved to the next field.

Note: A complete listing of the Item Codes can be viewed by pressing the F9

Function Key.

48

Page 49: INTRODUCTION+final

5. Enter Cost Code or Capital Job Code in the Cost Code Field to which credit

has to be given.

Note: A complete listing of the Cost and Capital Job Codes can be viewed by

pressing the F9 Function Key.

6. Current Average Value of the Item is displayed in the Current Average Field.

7. Enter Adjustment Quantity.

Important: Adjustment Quantity can also be zero or less than zero.

8. Enter Adjustment Value. The field defaults to the current average *

Adjustment Quantity. This value can be changed to any value including

negative values. The current average value of the item is constantly displayed

in the Current Average Field for reference.

9. Enter remarks in the Special Comments Field, if any

10. After ensuring that the values specified above are correct, click on the Posting

Button to make the Adjustment or the Exit Button to cancel the transaction.

3.5.3.14. Adjustment of Octroi and Freight (Month End Procedure)

49

Page 50: INTRODUCTION+final

1. Click on the Inventory Reports Button in the Inventory Control Main

Screen.

2. Click on the Run Report Button to run the report.

3. After making necessary adjustments the items whose average value has

been affected by the current adjustment are displayed on the screen and

this report can also be printed, if required.

50

Page 51: INTRODUCTION+final

3.5.3.15. Write-off / Physical Count Reporting

1. Select Other Applications from the File Menu in the Inventory Control Module.

2. Select WRITEOFF (Write offs/ Physical Count) from the pop-up window and

Click on the Run Button.

3. A Logon Box will appear.

4. Enter User name and Password and click on the Connect Button.

5. Enter the list of Item Code for which write off or Physical Count Report has to be

generated.

6. Click on the Check box if any item code has to be deleted from the list of item

codes.

7. Click on the Save Button to save the list.

51

Page 52: INTRODUCTION+final

8. A Pop-up window will appear. Click on either

Write off With Value

Write off Without Value

Stock Verification

To generate the respective report

9. To Exit the module Click on the Quit Button.

3.5.3.16. Store Requisitions

1. Items can only be issued from the stores on the basis of an approve Store

Requisition Slip.

2. Store Requisition Slips are generated by:

52

Page 53: INTRODUCTION+final

a. Work Order Module

b. Store Requisition Module.

Items required against a Work Order, are specified in the Estimated Materials and

can be issued from the store after approval of both the Work Order and the Store

Requisition Slip, which is generated through a report.

Items that are not related to a Work Order but need to be issued from any store are

requisitioned through the Store Requisition Module. These items can only be

issued after approval of both the Store Requisition and the Store Requisition Slip,

which is generated through a report.

3. Click on the Stores Requisition Module from the Inventory Icon of the MAXIMO

Main Menu.

53

Page 54: INTRODUCTION+final

4. Click on the Insert Icon to generate a new Store Requisition. A new requisition

number is automatically generated in the Store Request # Field.

5. Enter a brief description in the description field.

6. Requested by and Date, Status and Status Date, Modified By and Date Fields are

filled automatically after insert.

7. Specify Date Required.

8. Specify GL Account (Cost Centre)

9. Specify the Initials of the Approving Authority in the Forwarded To Field.

10. Enter Department. Double Clicking on this field will pop up a list of Valid

Departments

11. Click on the Line Item Icon to specify the Items required

54

Page 55: INTRODUCTION+final

12. Enter Item Code, Quantity required and Storeroom Location for all the items that

are to be drawn from the stores.

13. Click on the Save Icon to save the Store Requisition.

Note: All Store Requisition Slips Require Signatures of the Approving Authority.

3.5.3.17. Item Assembly Structures

1. Spares list of an Item which has been classified as a Rotating Item should be built

in form of an Item Assembly Structure. The advantage of having an Item

Assembly Structure is that the Spares list can be copied to all equipment having

the same item code i.e. the spare list need not be typed again and again for all

equipments.

2. Click on the Item Assembly Structures Module from the Inventory Icon of the

MAXIMO Main Menu.

3. Click on the Insert Icon to create a new Item Assembly Structure.

4. Enter the Store Code of the Rotating Item in the Item Field for which the item

assembly structure is to developed

5. Enter Remarks in the Remark Field.

6. Enter Parent Item Number in the Belongs to Field.

7. Enter Item Code, Quantity and a Remark for all the items that belong to the Item

Assembly Structure.

8. Click on the Save Icon to save the structure.

3.6. NEW SYSTEM (SAP)

3.6.1. Introduction

The objective of this document is to cover the description and definition of

scenarios relevant to the ICI Soda Ash Business function SAP Materials Management

55

Page 56: INTRODUCTION+final

module sub-component of Inventory Management. Inventory Management includes the

descriptions of goods movements for material Issues and Receipts, Material Reservations,

Stock transfers and Transfer postings, Material Batches and stock Inventory.

3.6.2. Overview of Inventory Management

SAP Materials Management Inventory Management system allows;

Managing stocks on a quantity and value basis

Plan, enter, and check materials and their respective goods movements

Carrying out evaluations of system based and actual physical stock availabilities

and post differences (if any)

3.6.2.1. Managing Stock by Quantity

In the Inventory Management system, the physical stocks reflect all transactions

resulting in a change in stock and thus in updated inventory levels. An overview of the

current stocks of any given material is available in real time.

For each material, not only the stocks in the warehouse are shown, but also the

stocks ordered but not yet delivered, reserved for production or for a customer, and the

stocks in quality inspection can also be monitored.

3.6.2.2. Managing Stock by Value

Stocks are managed not only on a quantity basis but also by value - a prerequisite

for cost accounting. With every goods movement, the following values are updated:

The stock value for inventory management

The account assignment for cost accounting

56

Page 57: INTRODUCTION+final

The corresponding G/L accounts for financial accounting via automatic

account assignment

Note:  In ICI Soda Ash Business both the quantity and the value are updated

automatically when entering a goods movement.

3.6.3. Goods Movement

Goods movements include both "external" movements (goods receipts from

external procurement, goods issues for sales orders) and "internal" movements (goods

receipts from production, withdrawals of material for internal purposes, stock transfers,

and transfer postings).

 

For each goods movement a document is created which is used by the system to

update quantities and values and serves as proof of goods movements.

Note: In ICI Soda Ash Business Function Goods receipt/issue slips are printed to

facilitate physical movements and the monitoring of the individual stocks in the

warehouse.

3.6.3.1. Inventory Stock Differences

The adjustment between physical stocks and book inventories can be carried out

in SAP. Different movement types are available for carrying out stock adjustments in the

system. Authorizations for these movements need to be set up in the SAP system for

adequate control and monitoring of stock adjustments.

Note: In ICI Soda Ash Business Function different movement types will be available for

carrying out stock adjustments in the system. (For a complete listing of the material

movement types and their description, see Movement Types section in this document

3.6.4. Inventory Management -Overview 

57

Page 58: INTRODUCTION+final

The following flow diagram illustrates the inventory management process;

Inventory management-Overview

 

Note: In ICI Soda Ash Business Inventory Management will allow the following

functions as illustrated by the diagram above;

a) Goods receipt

b) Goods issue

c) Stock management at storage location

d) Monitoring of stock in and out through various movement types and their

respective impacts on quantity and values

3.6.5. Integration of Inventory Management within SAP

Inventory Management (IM) is part of the MM Materials Management module

and is fully integrated in the entire logistics system (see following graphic).

58

Page 59: INTRODUCTION+final

 

Material is procured from external sources on the basis of the requirements

determined by Material Requirements Planning and manual Purchase Requisitions. The

delivery is entered in Inventory Management as a goods receipt. The material is stored

(and managed under Inventory Management) until it is delivered to customers (Sales &

Distribution), or is used for internal purposes (for example, for production).

During all transactions, Inventory Management accesses both master data (such as

material master data) and transaction data (such as purchasing data) shared by all

logistics components.

3.6.6. Goods Movements Details 

A goods movement (also called a material movement or stock movement) is an

event that causes a change in stock.

 

Note: The ICI Soda Ash Business function will allow the following types of goods

movement;

59

Page 60: INTRODUCTION+final

a)     Goods Receipt

b)     Goods Issues

c)      Stock Transfers

d)     Transfer Postings

These goods movements will be monitored through material movement types.

Details follow.

 

3.6.6.1. Goods Receipt

A goods receipt (GR) is a goods movement with which the receipt of goods from

a vendor or from production is posted. A goods receipt leads to an increase in warehouse

stock.

 

3.6.6.2. Goods Issue

A goods issue (GI) is a goods movement with which a material withdrawal or

material issue, a material consumption, or a shipment of goods to a customer is posted. A

goods issue leads to a reduction in warehouse stock.

 

3.6.6.3. Stock Transfer

A stock transfer is the removal of material from one storage location and its

transfer to another storage location. Stock transfers can occur either within the same

plant or between two plants.

3.6.6.4. Transfer Posting

A transfer posting is a general term for stock transfers and changes in stock type

or stock category of a material. It is irrelevant whether the posting occurs in conjunction

with a physical movement or not. Examples of transfer postings are:

60

Page 61: INTRODUCTION+final

Transfer posting from material to material

Release from quality inspection

Transfer of vendor supplied material into company's own stock

3.6.7. Accounting Principles for Inventory Management

In the SAP Inventory management system, the accepted accounting principle of

no posting without a document applies. According to this principle, a document must be

generated and stored in the system for every transaction/event that causes a change in

stock. When posting a goods movement in the SAP System, the following documents are

created:

 

3.6.7.1. Material document

When a goods movement is posted, a material document is generated that serves

as proof of the movement and as a source of information for any applications that follow.

 

3.6.7.2. Accounting document

If the movement is relevant for Financial Accounting (that is, if it leads to an

update of the G/L accounts), an accounting document is created parallel to the material

document. The G/L accounts involved in a goods movement are updated through an

Automatic Account Assignment (For details please refer to SAP MM Valuation Business

Blue Print).

 

3.6.7.3. Changes to a Document

Once a goods movement has been posted, it can no longer be changed. If a

reversal of the movement or change in the quantity of material moved is required, a new

document must be entered in the system.

61

Page 62: INTRODUCTION+final

3.6.7.4. Document Numbers

A material document is identified by a document number and the material

document year. An accounting document is identified by the company code, the

document number, and the fiscal year. The material document number and the accounting

document number are different.

3.6.8. Inventory Management-Goods Receipt Process Flow 

The following flow schematic illustrates the Goods Receipt process whilst

highlighting the accounting principle for Inventory Management – Goods Receipt.

Inventory management-Goods Receipt

Note: The ICI Soda Ash Business function will allow stock to be blocked for usage if and

when required

62

Page 63: INTRODUCTION+final

3.6.9. Inventory Management-Movement Type Concept

3.6.9.1. Movement Type

 

When a goods movement is entered in the SAP Inventory Management system, a

movement type must be entered to differentiate between the various type goods

movements. A movement type is a three-digit identification key for a goods movement.

The following table contains examples of movement types.

3.6.9.2. Goods Movements and Movement Types

Note: The ICI Soda Ash Business function will allow the following goods movement

types as illustrated in the table below;

Movement Type Description101 Good Receipt for PO into store102 Good Receipt for PO into store – reversal103 Good Receipt for PO into GR Blocked stock104 Good Receipt for PO into GR Blocked stock – reversal105 Release GR blocked stock for warehouse106 Release GR blocked stock for warehouse – reversal122 Return delivery to vendor123 Return delivery to vendor – reversal124 Return delivery from GR blocked stock125 Return delivery from GR blocked stock – reversal311 Stock Transfer from Storage location to Storage location551 Withdrawal for scrapping from unrestricted use stock 552 Withdrawal for scrapping from unrestricted use stock – reversal561 Receipt per initial entry of stock balances into unrestricted use stock562 Receipt per initial entry of stock balances into unrestricted use stock – reversal

3.6.9.3. Control Functions of the Movement Type

The movement type has important control functions in Inventory Management.

Note: In ICI Soda Ash Business Function movement types will allow for

updating of stock quantity

63

Page 64: INTRODUCTION+final

updating of stock values

 3.6.9.4. Results of Goods Movements in the System

 

In ICI Soda Ash Business function when a goods movement will be entered, the

following chain of events will occur in the system:

 

A material document is generated, which is used as proof of the movement and as

a source of information for any other applications involved.

If the movement is relevant for Financial Accounting, one or more accounting

documents are generated.

 The stock quantities of the material are updated.  

The stock values in the material master record are updated, as are the stock and

consumption accounts.

 

Depending on the movement type, additional updates are carried out in participating

applications. All updates are based on the information contained in the material

document and the accounting document. For example, in the case of a goods issue for a

cost center, the consumption values of the items are also updated. 

 

3.6.10. Inventory Management-Goods Movement Process Flow

The following flow schematic illustrates the Goods movement process whilst

highlighting the accounting principle for Inventory Management – Goods movement.

64

Page 65: INTRODUCTION+final

Inventory Management-Material Movement 

3.6.11. Goods Movement and Material Type 

Note: In ICI Soda Ash Business function the following types of goods movements will

be available for use with their respective material Types and characteristics;

 

Goods In Goods Out Goods In / Out

Purchase from Vendor to GR Blocked Stock(All Material Types)

Sale of Goods(Finished Materials)

Transfer Posting(All material types)

Purchase from Vendor to stock(Raw Materials)

Write off of Goods(All material types)

Stock Transfers(All material types)

Purchase from Vendor and charged directly to Cost Center / Asset (All material types)

Scrapping of materials(All material types)

 

Write in of Stock    Goods produced by in-house production (Finished Materials)

   

 

3.6.12. Good Receipt Functionalities

65

Page 66: INTRODUCTION+final

During entry of a goods receipt for a purchase order, the system proposes the

item's open purchase order quantity as the quantity received. If the delivered quantity

differs from the open purchase order quantity, the proposed quantity can be changed.

When the goods receipt item is entered, the system compares the quantity

delivered with the open purchase order quantity and immediately reports any under or

over delivery. 

3.6.12.1. Open Purchase Order Quantity

The open purchase order quantity is the quantity still to be delivered for a

Purchase order item. 

3.6.12.2. Under Delivery

In the standard SAP System, under deliveries are allowed. It is also possible to

enter an under delivery tolerance percentage in the order item.

When a quantity of goods is received that lies within the under delivery tolerance

range, the quantity is interpreted as a partial delivery and is accepted as such. The system

does not issue a warning message. If the quantity of goods received lies below the under

delivery tolerance, the system points out the under delivery to the user with a warning

message 

Note: If the under delivery is not a partial delivery but a final delivery, the "delivery

completed" indicator has to be set on the Purchase Order. In such an event ICI Soda Ash

Business function purchasing organization will set this indicator to close the Purchase

Order

3.6.12.3. Over Delivery

66

Page 67: INTRODUCTION+final

In the standard SAP System, over deliveries are not allowed. In the case of an

over delivery, the system issues an error message.

If over deliveries are to be allowed, the following data can be maintained in the purchase

order:

 

3.6.12.3.1. Over delivery tolerance

In the purchase order, an over delivery tolerance percentage can be specified. If a

quantity of goods received is larger than the order quantity plus the over delivery

tolerance, it is not accepted by the system.

 

Note: ICI Soda Ash Business Function will use the Over delivery indicator to allow a

tolerance of up to 10% in over delivery of material goods.

ICI Soda Ash Business Function will have the option to set tolerance of greater than 10%

under exceptional circumstances.

3.6.12.4. Delivery Completed

The "delivery completed" indicator specifies whether a Purchase order item is

considered closed. This means that no more goods receipts are expected for this item. If

the "delivery completed" indicator is set, the open purchase order quantity becomes zero,

even if the full quantity has not been delivered.

Note: ICI Soda Ash Business Function will use the delivery completed indicator to close

open Purchase Order in the event of non-delivery of items.

Although the "delivery completed" indicator is not set, a purchase order item is still

considered closed if the full quantity has been delivered. This means that, in this case, the

"delivery completed" indicator is not required.  

67

Page 68: INTRODUCTION+final

3.6.12.5. Several Goods Receipt on a single Purchase Order 

If you post a goods receipt with reference to a purchase order, the system converts

every selected order item into a goods receipt item. This means that exactly one goods

receipt item is created for each order item.

 

However, there are cases when it is necessary to create several goods receipt

items for a single order item. For example, this might be the case if the delivered material

is to be stored in several storage locations, if a partial quantity of the delivered quantity is

to be posted into quality inspection, or if the delivered quantity consists of several

batches.

 

To enable these cases to be handled in a single document, the Inventory

Management system provides the function of entering a subset of items as goods receipt

against the items present in the Purchase Order.

Note: In ICI Soda Ash Business function will be able to

1. Post single Goods Receipt on a single Purchase Order.

2. Post multiple Goods Receipt on a single Purchase Order.  

3.6.12.6. Goods Receipt and Shelf Life Expiry Date

When you enter a goods receipt, it is possible to check the shelf life of a material.

 

3.6.12.6.1. Prerequisites of Shelf Life Expiry Date (SLED)

The shelf life is only checked if the following prerequisites are met. The minimum

remaining shelf life is maintained in the material master record. The minimum remaining

shelf life is the minimum number of days for which the material must keep for the goods

receipt to be accepted by the system.

68

Page 69: INTRODUCTION+final

Caution: Batch Management must enable for the material for which Shelf Life

Expiration date (SLED) is required.

 

Note: In ICI Soda Ash Business function Shelf Life Expiry Date will be available for the

following Material types;

 

SAP Code for Material Types SAP Material Type DescriptionERSA Stores & Spares Material

3.6.12.7. Quality Inspection Process Flow

The following flow diagram illustrates the Quality Inspection process flow at

goods receipt.

If an inspection at the time of goods receipt has been defined for the material, the

system automatically creates an inspection lot when the goods receipt is posted. Quality

Management uses this inspection lot to carry out the inspection.

Inventory Management-Integration of Quality Management

69

Page 70: INTRODUCTION+final

Note: For detailed information on the Quality Management system, see the QM Blue

Print topic Inspection Process at goods receipt.

 

In ICI Soda Ash Business function Quality Management will be available for

imported materials and select specific materials.

3.6.12.8. Goods Receipt and Material Batches

Materials that require precise identification, for example manufactured products,

are identified and managed in stock not only according to material number, but also

according to batch number.

With batch handling, you can manage not only production lots from in-house production,

but also production lots from vendors as separate entities.

 

Note: In ICI Soda Ash Business function Batch Management will be available for the

following Material types;

 

SAP Code for Material Types SAP Material Type Description

ERSA Stores & Spares Material

3.6.13. Good Issue Functionalities 

Companies usually distinguish between various types of goods issues, each of

which is handled in the SAP System as follows:

Note: The ICI Soda Ash Business function will allow the following types of goods

movement in issuance;

 

a)     Goods Issuance by return deliveries to Vendors

b)     Goods Issuance for Scrapping

c)      Goods Issuance with reference

70

Page 71: INTRODUCTION+final

d)     Transfer from one store to another

 

These goods issuance movements will be monitored through material movement types.

 Details follow.

 

3.6.13.1. Goods Issue by Return Deliveries to Vendors

Return deliveries to vendors are carried out with reference to a purchase order.

 

3.6.13.2. Goods issue by Scrapping

If a material is no longer usable, it must be scrapped. Scrapping of a material is entered in

the SAP System as a goods issue. The withdrawal of samples must also be entered as a

goods issue.

 

3.6.13.3. Goods Issue with reference to a Reservation

The SAP Inventory Management system can handle both planned goods issues and

unplanned goods issues. You plan goods issues in the SAP System with reservations.

3.6.13.4. Goods Reservation

A reservation is a request to the warehouse to keep materials ready for a goods

issue at a later date and for a certain purpose. A reservation for goods issue can be

requested by various departments for various account assignment objects (such as cost

center, production order, asset, etc.).

 

When a reservation is entered, the following events occur in the system:

 

A reservation document, which serves as proof of the request, is created.

In the material master record, total stock and unrestricted-use stock of the material

remain unchanged. Reserved stock is increased by the reserved quantity.

71

Page 72: INTRODUCTION+final

In MRP, available stock is reduced by the reserved quantity. This is visible in the

current stock/requirements list. The reservation causes an entry to be made in the

requirements planning file.

 

Note: The ICI Soda Ash Business function will use the Goods reservation function to

reserve material goods for future issuance against

1. Stock

2. Cost center

3. Asset

4. Maintenance Work Order

3.6.13.5. Goods Reservation Process Flow

The following figure shows the process flow of a material reservation.

 

72

Page 73: INTRODUCTION+final

A reservation document consists of a header and at least one item. The header contains

general data about the reservation (creator, movement type, account assignment). The

items describe individual planned movements (material, quantity, requirement date).

3.6.13.6. Authorizations (User Roles and Profiles)

Business Process IZ NA SA GRM MAR MTC TH QM MB TIK BB AKJ RH IA RTAGoods Receipt / Issue Maintenance*Stores and Spares, Raw Materials & Scrap Material              

  

      

Goods Receipt / Issue Maintenance*Finished Goods Material                        Goods Receipt / Issue Maintenance*Raw Materials & Packing Material                        Goods Receipt / Issue Maintenance*Lab Materials                            Goods Receipt / Issue Maintenance*Stationary Material                          Goods Receipt / Issue Maintenance*Admin, Wheat and Hospital Supplies Materials                          Goods Receipt / Issue Maintenance*IT Material                            

             Duplication of roles for Backup reasons Purchasing Department               Engg. Stores     Accounts and Stores Inventory

             Raw Materials and Other Material Types      

Note: Material Type wise restriction

73

Page 74: INTRODUCTION+final

3.6.13.7. Authorizations (SAP Login, User Name and Respective Area):

USERS LEGEND    User Initials SAP User Area and Function

IZ Iqleem Zahur

Purchasing DepartmentFinished Goods Stores Warehouse

NA Naeem Ahmed

SA Shahid abbas

MAC Ch. M. Aslam

ZSH Sh. M. Zahid

GRM Ghulam Rabanni Malik

Stores and Spares Warehouse, Raw Material and Scrap YardMAR Mohd. Arshad Rana

CID Ch. Imam Din

TR Raja Tahir Abdullah

IB Imran Bashir

CMA Ch. Mushtaq AhmedFinance Department

SMR S. M. Rizwan

MTC M. Taufeeq Cheema

Raw and Packing MaterialsTH Tabsheer Hussain

QM Qazi Munir

RH Raaghib Hussain

MB M. Bilal Laboratory MaterialsAKJRH

Aurangzeb K JadoonRaghib Hussain Admin, Wheat and Hospital Supplies Materials

TIKBB

Tanveer Iqbal KhanBashir Bhatti Stationary Store

IA Iftikhar Ahmad IT Materials

RTA Raja Tariq Ashraf  

74

Page 75: INTRODUCTION+final

Chapter # 4

RESULTS & DISCUSSION

75

Page 76: INTRODUCTION+final

4.1. POINTS OF DIFFERENCES REPORT

4.1.1. Physical Inventory Related

there is no change in the physical inventory management system due to change in

inventory management software but, it is suspected that after some time some changes

are take place in the physical inventory management system.

4.1.2. New Software Points

It provides the integration facility i.e. one matter of ICI Soda Ash Khewra

inventory can be handle from ICI polyester plant of Karachi.

Now it is easy to report a thing from one unit of ICI to another. It is like provides intranet

facility within the ICI Pakistan group.

4.1.3. Interviews Reviews Difference

There are following points of differentiation inn between the old and new

inventory management systems:

There is lack of facilitations in the MAXIMO inventory management system and

also the description about the job allocation is differing due to which some

problems are creating.

The SAP is difficult to use without authorization and proper training courses.

Calculation work and intellectual review in the SAP inventory management

system is easier then MAXIMO.

4.2. ANALYSES

I am using SWOT analyses for the comparative study of inventory management

and control system. There can be taken the SWOT analyses of both the inventory

76

Page 77: INTRODUCTION+final

management systems i.e. MAXIMO and SAP. It shows all the things which are taken

under consideration while purchasing any inventory management and control software.

There are clearly subscribed the Strengths, Weaknesses, Opportunities, and Threats of

both the inventory management systems. One by one I take the study of both the systems;

first I take the SWOT analyses of MAXIMO, which is the previous inventory

management system.

4.2.1. SWOT analyses of MAXIMO

4.2.1.1. Strengths:

In ICI Soda Ash MAXIMO is working as inventory management software since

last 5-6 years, that’s why all the employees and managers are understanding its

functions easily and use-to with this system.

It is less expensive then SAP inventory management software.

There is flexibility in the functions of MAXIMO inventory management system.

Users are more comfortable while using the functions of MAXIMO due to lesser

variables involvement.

It provides all functions of inventory management and control system used in

manufacturing organizations, and also it cannot damage for a single time in the

period of 5-6 years.

4.2.1.2. Weaknesses:

There are following weaknesses of MAXIMO inventory management and control

System

The integration facility is not there in the MAXIMO due to which reporting

work is more and process is time taking.

There is lack of security of data in the MAXIMO.

77

Page 78: INTRODUCTION+final

4.2.1.3. Opportunities:

It provides the upgrade facility and expanding in the functionalities is also

possible.

It is saleable at any time and has less expensive then SAP.

4.2.1.4. Threats:

There are following threats in the MAXIMO inventory management system:

In case of increase in operation of organization it may not be much progressive

as per the need of new technology requirements.

If any other organization came with new explanatory software there may be

chance of less competitiveness.

New world of W.T.O. came in near future due to which may be ICI Soda Ash

needs more qualitative advantages.

4.2.2. SWOT analyses of SAP inventory management system

As per SAP inventory management system is concern, it is newly installed in ICI Soda

Ash and has following Strengths, Weaknesses, Opportunities and Threats.

4.2.2.1. Strengths:

It provides the facility of integration between activities and network. Now all the

group of ICI Pakistan is now directly interlinked.

It has provided more facilities and functions of inventory management system.

It provides more secrecy in its functions and data as compared to MAXIMO

inventory management system.

78

Page 79: INTRODUCTION+final

4.2.2.2. Weaknesses:

Actually SAP is newly came into Pakistan that why, its some strengths are its

weaknesses. These are as follows:

There is not much operator of SAP in Pakistan.

The employees are taking sometime in understanding the functions and

facilitations of SAP inventory management system.

4.2.2.3. Opportunities:

It is totally a new invention in Pakistan and its positive and good use can make

value edition in the goodwill of ICI Soda Ash, and also meet world wide quality

standards.

It is good time for the employees of ICI Pakistan to make knowledge of a

valuable inventory management system.

4.2.2.4. Threats:

The biggest threat is of the failure of the SAP inventory management system, as

its installation is the result of long term planning.

May be it will not be that much productive as per its estimations.

Its functions are more then MAXIMO inventory management system and need

some specialization for its better use in organization.

May be employees are not feeling much comfortable in use of SAP inventory

management system.

4.2.3. On the Bases of Intellectual Review

Installation of SAP is the part of long term planning.

79

Page 80: INTRODUCTION+final

The point of W.T.O policies are under consideration in installation of SAP

inventory management system.

4.2.4. On the Bases of Interviews

I analyze some points on the bases of interview questions which are as follows:

Ans.1

The main difference in both the inventory management system is the point of integration.

SAP is providing the facility of integration rather MAXIMO does not have this facility.

Ans.2

There is no expiration date any of both inventory management systems i.e. SAP and

MAXIMO but, when new softwares are came into market; there is requirement of change

and improvement in system.

MAXIMO is working in ICI Soda Ash since last 5-6 years and there is no defect seen in

the working duration.

As, SAP is newly installed inventory management system, it has also unlimited life but, it

is more productive then MAXIMO in terms of its features, functions and security system.

Ans.3

With the installation of new inventory management system the ICI Soda Ash is bit more

productive in sense of security, errors and omissions. Also, it makes the work quicker and

timely reporting are easily made in time.

Ans.4

It is the timely requirement and may be due to long term planning as, there is gradually

increase in the competition.

80

Page 81: INTRODUCTION+final

Ans.5

Yes, there are policies of W.T.O relates to quality management are also under

consideration while installation of new inventory software.

I don’t comfortably say, it is true MAXIMO does not meet the requirements of W.T.O

quality policy but this is sure that it is under consideration.

Ans.6

No, it’s not true that MAXIMO does not meet the requirements of ICI Soda Ash. It is

rightly said that, its processing is slow as compared to SAP inventory management

system otherwise it provides almost all the functions which provides SAP except

integration.

Ans.7

One cannot say that MAXIMO is easier or SAP because, the employees are MAXIMO

since last 5-6 years and now they are use to and now more comfortable to use MAXIMO

rather SAP inventory management system.

SAP is more explanatory inventory management system but, need some time to

understand its functionalities.

There is need of coaching classes of SAP in ICI Soda Ash for the better understanding of

new inventory management system.

Ans.8

Yes, there are different criteria are used for the selection of new inventory software i.e.

SAP. Main emphases on the quality and security.

81

Page 82: INTRODUCTION+final

The basic reason of selecting SAP inventory management system is its integration

facility.

Ans.9

MAXIMO is easier because, it has less functions and easy to understand rather SAP is

also not so difficult but, as it has more functions and newly introduce in Pakistan its start

may feel difficult.

Ans.10

Yes, it is necessary to work parallel in both the inventory management system for a year

to avoid threats of the system and control weaknesses of the system.

As, at any time if SAP is made some trouble, the data maintained in MAXIMO overcome

many of threats.

4.2.5. On the Bases of New Inventions and Technology Requirements

The main difference in the new technology is the networking difference. The new

inventory management system is providing the intranet facility with in all branches of ICI

Pakistan, which is the requirement of future business and new technology requirement.

4.2.6. On the Bases of Convenience

As such, there is no big difference in between the inventory management system.

Regular employees are more convenient in use of MAXIMO rather SAP.

It is expected that SAP is more easier as, it has elaborate its all features due to

which if any problem occur it will be solved with in seconds.

82

Page 83: INTRODUCTION+final

4.2.7. On the Bases of Security

The SAP inventory management system is providing more secrecy in its data and

functionalities which is the keen desire of good organizations.

The provision of authorization is more in SAP.

83

Page 84: INTRODUCTION+final

Chapter # 5

CONCLUSION & RECOMMENDATIONS

84

Page 85: INTRODUCTION+final

5.1. CONCLUSION

After the study of inventory management in ICI soda ash I conclude that in the

ICI soda ash the inventory management & control system is very easy because they can

handle inventory of about Rs.250 million at a time and more than 33,000 items are

included in that but, there is no problem in working.

Early when the manual system is used, the work done in weeks but now the same

work will be done in mints just due to the improved technology and its use in the

company. First they can train their employees and than introducing technology and with

some proper planning downsizing implement.

Now in year 2003-2004 there is new software installed which makes the work

more easy, in the other Branches of ICI the SAP is already installed. In ICI the employees

are already trained for the working on SAP.

In the ICI soda ash I see that this company shows double profit in account as

compared to their overall cost. For inventory control there is a proper eye on the different

vendors & whenever they find new vendor they add.

I also conclude that the inventory management system in ICI is very easy as the

policy of training of the employees is very good, due to which ICI avail the opportunity

of installing new software. They emphasis more on the holding cost rather than stock out

position because they have wide area for storing inventory.

Computer network technology concerns the integration of computers and

telecommunication networks, creating a world-wide web of computer networks. This

enables new ways of information processing and of organizing business, as optimization

can shift towards functional effectiveness, and business networks can be reconfigured

with the help of electronic integration. Important issues in computer network technology

are distributed system technology and object-oriented system technology.

85

Page 86: INTRODUCTION+final

Distributed system technology regards technology for groups of autonomous computers,

each consisting of processing and storage elements, which are interconnected through a

communication network in order to provide integrated functions. Distributed system

technology is a means to achieve integration across locations while respecting the need of

organizations to have autonomy over their own information processing.

The information processing may be executed by computers at different locations,

the computers might be equipped with different techniques and the technical complexities

of a distributed system are hidden from the application specific components. These

requirements allow networked organizations to achieve integration across locations,

while preserving autonomy over their own functions and data, the techniques of their

systems and the management of technical complexities.

At the end it is concluded that, SAP is for better in facilitation, functionalities, and

may have good future prospects in the Pakistan. Now it is not true to say that it is the best

option for ICI Pakistan because there are some huge threats and ICI group of Pakistan

first needed to tackle with its threats with the help of its opportunities and by rectifying

its weaknesses.

5.2. RECOMMENDATIONS

As for as ICI is growing this is good to change the technology and improve their

structure but there are following main points on which they have to concentrate more.

5.2.1. Cost Consciousness

They can figure out the profit margin and compare it with the cost of new

technology as now they can install new software (SAP), about cost of 200 million.

5.2.2. Course Introduction

There is need in Pakistan to teach good inventory management softwares in

educational institutions.

86

Page 87: INTRODUCTION+final

5.2.3. Parallel working

It is necessary for ICI Soda Ash business to use both the inventory management

systems parallel for at-least first six months because, the inventory management system

i.e. SAP is newly installed in ICI Soda Ash and before that there is no user of SAP in

Pakistan. In case of any problem or default you must have backup of that so it is the

timely requirement.

5.2.4. ICI must:

Show unrivalled understanding of customers and their markets seize opportunities

rapidly, taking intelligent risks to bring measurably better products to market.

Meet demanding year-on-year growth targets above industry norms, and

constantly improve operational performance.

Hire, inspire and develop outstanding people by encouraging initiatives,

supporting new ideas and rewarding delivery.

Never compromise ICI’s commitment to safety, health and the environment.

87

Page 88: INTRODUCTION+final

APPENDIX

88

Page 89: INTRODUCTION+final

QUESTIONNAIRE

1. What is the main difference in both the inventory management systems i.e. SAP and MAXIMO?

2. For how long you feel that MAXIMO is productive and for how long SAP is productive?

3. What you feel the impact on the inventory management system after the installation of new system i.e. SAP?

4. What is the need of that much expensive software at this time?

5. Is there any reason relates to WTO policies OR quality management for which you install the new system?

6. Is MAXIMO does not meet the requirements of ICI Soda Ash?

7. Out of both systems (MAXIMO and SAP) which is facilitates the user more and more easy to use?

8. Are you use the weighting criteria to select the new software SAP like, you give weight as:

i. 15 % to securityii. 10 % to quality consciousness

iii. 10 % to value edition iv. 10 % to standardizationv. 10 % to meet the requirements of new technology inventions

vi. 10 % for future predictionsvii. etc

9. What you feel that MAXIMO is easy to understand or SAP?

10. Is there is need of parallel working of both the inventory management system for a year or not?

89

Page 90: INTRODUCTION+final

REFERENCES

1. James. C Van Horne, John M. Wachowicz Jr, (2001). Financial Management (11 th

Edition). Pearson Education, Inc. Palo Alto, California.

2. ASAP world consultancy and Jonathan Blain with Mark Denning, Jonathan lingard, etc (1998), Special Edition, Using SAP R/3 (3rd Edition). E-mail: [email protected]. Sydney: Australia. Web: www.asap-consultancy.co.uk

3. Hamdy A. Taha (1998). Operation research an introduction international edition (6th edition). University of Arkansas, Fayetteville. Prentice-Hall International. Inc.

4. James O. Brian (1999). Management Information System International edition.

5. Extra Ordinary General Meeting 2001 ICI Pakistan Limited

6. Interview By Mr. Zia Syed (Finance Manager Soda Ash)

7. Interview By Mr. Akbar Malik (Hr & Admin Manager Soda Ash)

8. Interview By Mr. Iftikhar Ahmad (It Manager Soda Ash)

9. Interview By Malik Ghulam Rubani (The Store Manager)

10. Interview With Chaudhary Mushtaq (The Purchase Manager)

11. Interview With Mr. Taufiq Cheema (The Planning Department Manager)

12. www.ICI.com

13. http://www.ici.com/iciportal/index.asp

90

Page 91: INTRODUCTION+final

Abbreviation DescriptionAKA Also known asBOM Bill of MaterialG/L Account General Ledger AccountMM Materials ManagementMRP Material Requirement PlanningPO Purchase OrderPREQ Purchase RequisitionQM Quality ManagementRFQ Request for QuotationTBC To be ConfirmedTBD To be DeterminedSH&E Safety, Health and EnvironmentSSH&E Safety, Security, Health and EnvironmentMRP Manufacturing Retail Price

91