innovative aggregate developed using edilteco’s politerm blu …energystoreltd.com › wp-content...
TRANSCRIPT
energystore TLA has been developed using the innovative Politerm® Blu technology
created by Edilteco®. Politerm® Blu was created in 1981 and is now successfully
established in over 40 countries worldwide via Edilteco’s franchise network.
In 2018 energystore became the exclusive manufacturer of Politerm® Blu products
for the UK and Ireland. Since then we have been able to combine the excellent
thermal properties of energystore superbead with Politerm® Blu to create
energystore TLA.
energystore TLA
ENERGYSTORE TLA 32 ENERGYSTORE TLA
When EIA is applied to expanded polystyrene (EPS)
beads it ensures the EPS beads mix perfectly with
cement and water.
Without the EIA technology, the EPS beads – which are
much lighter than cement – float to the top of the mix
before it hardens. Adding EIA resolves this problem
and a homogeneous mix with a high thermal insulation
level and consistent quality is achieved.
The ideal solutionThe combination of EPS beads and cement creates a
lightweight screed that has exceptional thermal, weight and
acoustic properties. This makes energystore TLA insulated
screeds the ideal solution for many applications.
There is a wide range of construction applications that can benefit from
energystore TLA’s unique properties.
Product applications
Product benefitsQuick installationOne team can install at least 1,000m2 of
energystore TLA per day, allowing for increased
productivity on-site.
Improved project flexibilityNo need to pre-order or store insulation materials
weeks in advance. Installers can be booked with a
few days’ notice.
Flexible product solutionenergystore TLA comes in many factory-mixed
formats to meet customer specifications
on thickness, weight and thermal performance.
Quick dryingWalk on the floor in 24 hours (48 in winter). Complete
drying time of one day per 10mm of thickness.
In-life performanceenergystore TLA creates a single structure with no
gaps in the insulation layer and requires no sealing
of joints.
Low environmental impactThere is no wastage or offcuts to be disposed of.
energystore TLA is 85% polystyrene bead, which
makes it one of the most environmentally friendly
insulation products on the market.
Why is energystore TLA so unique?
The key ingredient in energystore TLA
is EIA, a special additive developed by
Edilteco®.
Insulated floor screedInstalled as a replacement for traditional
EPS/PIR (polyisocyanurate) insulation.
Acoustic & lightenergystore TLA’s low density means it
provides an effective aggregate for
weight reduction in intermediate floors. It also
has acoustic properties to reduce impact noise.
Insulated roofingInstalled as a replacement for traditional flat
or pitched roof insulation that bitumen can
be applied directly onto.
ENERGYSTORE TLA 54 ENERGYSTORE TLA
Product accreditationTesting of the energystore TLA is done in
accordance with BS EN 16025 ‘Thermal and/or
sound insulating products in building construction.
Bound EPS ballastings’.
All energystore products are manufactured in
ISO 9001, ISO 14001 and OHSAS 18001 accredited
manufacturing facilities.
energystore TLA is made with expanded virgin graphite EPS beads mixed with
EIA additive to form a thermal lightweight aggregate. Once mixed with cement
and water the finished product can help achieve compliance with building regulations
throughout the UK and Ireland.
Technical data
Cement dosage kg/m3 (absolute technical characteristics) 110 200 250 300 350
Density after 28 days Kg/m3
Thermal conductivity o W/mK
Compressive strength N/mm2
Flexural strength N/mm2
Cohesion kPa
Hot-sealed membrane rupture N/50mm
Cold-sealed membrane rupture N/50mm
Elasticity module N/mm2
Permeability to water vapour µ
Shrinkage (NBN) mm/m
Specific heat kj/kgK
Impact sound reduction ∅L at 500 Hz
Impact sound pressure level
Fire reactivity class
Smoke production class
Observation of drops or inflamed particles
130 approx
0.043
0.528
0.12
-
-
-
-
-
-
1.40
n.d.
n.d
215 approx
0.065
0.69
0.37
82.62
57.00
35.00
235.30
10.11
0.427
1.40
n.d.
n.d.
265 approx
0.067
0.83
0.46
82.62
n.d.
n.d.
n.d.
11.50
n.d.
1.40
14db thick 5cm
61db thick 11cm
315 approx
0.080
1.61
0.95
127.17
62.00
47.00
489.50
12.00
0.35
1.40
21.5db with mat
n.d.
365 approx
0.103
1.69
0.59
n.d.
21.28
13.00
n.d.
21.04
0.270
1.40
n.d.
n.d.
energystore TLA technical data
A2 UNI EN 13501-1
s1 UNI EN 13501-1
dO UNI EN 13501-1
energystore TLA is tested against BS EN 16025 with the following declared performance characteristics
ʎ
energystore TLA U-Values
P/A ratio
150mm
175mm
200mm
225mm
250mm
275mm
0.15
0.13
0.12
0.11
0.11
0.10
0.18
0.16
0.15
0.14
0.13
0.12
0.20
0.18
0.16
0.15
0.14
0.13
0.21
0.19
0.17
0.15
0.14
0.13
The above figures are calculated in accordance with BS 6946 andassume 300mm wall thickness, no edge insulation, 50mm finishingscreed and a 100mm concrete subfloor.
0.20 0.40 0.60 0.80
TLAscreed
thickness
THERMAL BRIDGING CALCULATIONS
Ψ (psi) values are becoming increasingly important in
meeting compliance with building regulations.
In modern buildings junction heat loss can account for
up to 30% of total heat loss.
The energystore technical team can produce
project-specific 3D thermal modelling in accordance
with BR 497, producing accurate Ψ values which can
lead to enhanced thermal performance of junction
details and greater flexibility in meeting building
regulation’s energy efficiency requirements.
The energystore TLA technical department are members of the Elmhurst Energy
U-Value Competency Scheme. If you require a project-specific U-Value calculation,
please get in touch at [email protected] or use the online U-Value
calculator at www.energystoreltd.com/uvalue
energystore technical department
If you are interested in using ourU-Value service, get in touch [email protected]
CERTIFIED ENERGYSTORE CPD
energystore offer a range of certified CPD and
factory tours to help support architects in meeting
their annual CPD requirements. Our CPD courses
focus on the principles of good-quality insulation
and common on-site pitfalls that can reduce
insulation effectiveness.
Please get in touch with theenergystore technical team toarrange a free CPD at: [email protected]
Other energystore services
7 ENERGYSTORE TLA ENERGYSTORE TLA 7
energystore superbead is the leading full-fill EPS cavity wall insulation in the UK andIreland. It is injected into walls with a water-based bonding agent.
energystore superbead
Products and servicesenergystore’s commitment to learning and
innovation has led to the provision of a wide variety
of products, skills and services including
thermography, 3D thermal modelling and CPD
services, as well as strong research and
development relationships with some of the UK’s
leading universities.
In 2018, energystore established a franchise
relationship with Edilteco® to bring their unique
Politerm® Blu technology to the UK for the first
time to create energystore TLA.
energystore TLA has quickly become the insulation
product of choice for many of the UK’s leading
construction firms.
Read more and watch the energystoreTLA video at energystoreltd.com/TLA.
energystore was founded in Northern
Ireland in 1974 and is the UK’s leading
manufacturer of EPS-based insulation
products with five manufacturing
facilities throughout the UK and Ireland.
energystore’s core product, energystore
superbead, is installed in over 1,000
properties a week.
About energystore
For more information please call us on: 0800 085 6687email: [email protected] or visit: www.energystoreltd.com
making homes warmer
energystore commissioned Sustainable Homes to
produce an independent, full end to end life cycle
assessment of the environmental impacts of superbead.
Sustainable Homes found our product to be the most
environmentally friendly insulation product available on
the market, giving a carbon payback of five months.
Sustainable Homes also found that, “energystore
superbead displayed the lowest Global Warming
Potential per equivalent unit of insulation when
compared to other insulation products on the market.”
superbead: most environmentallyfriendly insulation product in the UK
energystore superbead
Thermal conductivity (λD)Density (Kg/m³)
Fire Classification
REI classification
0.033 W/mK
12kg ± 2kg
Class E
REI 45
Applications
• Masonry cavity wall insulation
• Timber frame cavity wall insulation (NHBC approved)
• Robust Details-approved party walls
12.00
10.00
8.00
6.00
4.00
2.00
0.00
energystore
superbead
Glass Wood
Wood Fibre
EPS (average)
Polyurethane
Rock Wool
Extruded Polys
tyrene
Aerogel
Vacuum Insulation
KgCO
2e p
er u
nit
Insulation type
Installation 5%
Emissions produced
Manufacturing 17%
Raw materialtransportation
2%
Raw materialprocessing
76%
GLOBAL WARMING POTENTIAL BY INSULATION TYPE
Emissions during energystoresuperbead manufacturing