CURRICULUM VITAE

CURRICULUM VITAE

1. PROPOSED POSITION

: Mechanical Engineer

2. NAME

: ASMADI 3. DATE OF BIRTH

: September 8, 1957

4. NATIONALLY

: Indonesia

5. EDUCATION

: Mechanical Engineer, Technical Faculty of

Sunan Giri University, Surabaya Indonesia.

6. OTHERS TRAINING

: Technical Training Course in the field of

Value Engineering, Cost Control, Editing

Design and JIG Indonesia Jan,1990

Training Course in the field of leader ship

Professional management, Indonesia

March, 1996

7. LANGUAGE AND DEGREE

: Indonesia - Mother tongue

OF PROFICIENCY English - Excellent

8. MEMBER SHIP OF

: Member of Indonesia Society of Engineer PROFESSIONAL

9. EMPLOYMENT RECORD

:

From Nov, 1999 up to 2009Employer.

: Dinas Pekerjaan Umum (PU)Position held and Description of

Duties. Detailed design of the hydro mechanical

Works Reviewed the contractor's.

Construction schedule, equipment schedule

for mechanical works.

Supervised and evaluated of the

contractor's construction works and

prepared methodology of heavy equipment

operation in connection with installation of

the sluice gate.

Calculation the bill and quantities of the

Hydro mechanical equipment.

Supervised and monitoring of the works

Progress, daily, weekly, monthly and

prepared progress report to be submitted to

team leader.

10. DETAILED TASK ASSIGNED IN WORK UNDERTAKEN WHICH BEST

THIS PROJECT. ILLUSTRATES CAPABILITY TO HANDLE THE

TASK ASSIGNED.

1. To review the contractor's

Construction program for

mechanical works including

review design and assembling

at the factory.

2. To review contractor's schedule

on equipment, manpower, and

material arrangement for

mechanical works and to check

works efficiency periodically

3. To supervise the quality control

By the contractor for mechanical

works at working site and at the

factory in co-operation with the

Government project office.

4. To prepare daily, weekly and

Monthly quality control report of

mechanical works and to submit

to the team leader.

PLTA Ir. H. Juanda Project : 5x32.6 MW 1 x 25 MW

Employer : PJT

Client : Pt. Catur Bina

Oct, 08-2012 up to March ,30-2013 6 monthResponsible for Special Study and Rehabilitation of Hydromechanical Electrical.

Turbine and Access.

: 6 Units

Intake and Maint. Gates: 8 Units Hollow Jet Valve.

: 2 Units Tower crane.

: 2 Units Stop log

: 8 Units

Draft Tube Gate.

: 4 UnitsHis duty covered :

(1) Supervised and quality control of the

contractor's construction works for steel

conduit or penstock construction.

(2) Prepared methodology of heavy

equipment operation in connection with installation or replacement of the steel slide gate, rubber. Draf tube gate include WPS and PQR. etc.

TOMO Irrigation Project Employer : PU

Client : Pt. Kalini P

Sept, 02-2012 up to Oct, 04-2012 1 month Welding Engineer.

Responsible for review welding and quality

control (QA/QC) of the mechanical works :

Steel penstock 1600 mm in diameters x 200 meters. His duty covered :

(1) Supervised and quality control of the

contractor's construction works for steel

conduit or penstock construction.

(2) Prepared methodology of welding operation in connection with installation of the steel penstock include WPS and PQR. etc.

Asahan I PLTA Project : 2 x 90MW Employer : PT. Bajradaya

Jan, 26-2009 up to Aug,30-2012 43 months

Mechanical Engineer.

Responsible for review design and quality

control (QA/QC) of the mechanical works :

- Turbine and Accessories : 2 Units - Draft Tube Gates : 2 Units - Steel Liner or Penstock: 6.2 mx600m l - Butterfly Inlet Valves : 2 Units

- Stop Logs

: 6 Sets

- Intake gate

: 1 Unit

- Racking equipment

: 1 Unit - Hollow Jet Discharge Valve : 1 Unit

- Over Head Crane

: 1 Unit

His duty covered :

(1) Reviewed the contractor's contraction

schedule, equipment schedule, for

Mechanical works.

(2) Supervised and quality control of the

contractor's construction works for steel

construction.

(3) Prepared methodology of heavy

equipment operation in connection with

installation of the gates, Turbine etc.

(4) Calculated the bill and quantities of the

Dam hydro mechanical equipment.

(5) Supervised works progress monitoring,

Daily, weekly & monthly progress report

and submitted to the team leader

Ponre-Ponre Dam Project South Sulawesi Employer : PU

Client : Pt. Metttana

Jan 2005 up to Jan 2009 60 Months

Mechanical Engineer.

Responsible for review design and quality

control of the mechanical works :

- Maintenance Gate. : 2.2x2.2m = 1 unit - Intake Gate and Hoist : 2.2x2.2m = 1 unit - Intake gate for siphon pipe 3 x3m = 2 Units - Siphon Steel Pipe : 1.60 m x220 m - Trash Rack

: 4x4.5 m = 1 Unit - Flushing gates and Hoist 1.5x1.5m = 2 Units

His duty covered :

(1) Reviewed the contractor's contraction

schedule, Design preparation, equipment

schedule for Mechanical works.

(2) Supervised and quality control of the

contractor's construction works for steel

construction.

(3) Prepared methodology of heavy

equipment operation in connection with

installation of the gates, siphon pipe.

(4) Calculated the bill and quantities of the

hydro mechanical equipment.

(5) Supervised works progress monitoring,

Daily, weekly & monthly progress report

and submitted to the team leader

Pelaparado Dam NTB Project Employer : PU

Client : Pt. Mettana

June 2000 up to April 2004 30 months

Mechanical Engineer.

Responsible for review design and quality

control of the mechanical works :

- Intake Gate and Hoist. : 2.2x2.5m = 1 Unit - Steel penstock : 2.0 m x 200 m - Trash Rack : 2.2x5.5m = 1 Unit - Bonneted Slide Gate : 2.0x2.0m = 1 Unit - Jet Flow Gate and Monorail hoist : 0.6m

- All Electrical

His duty covered :

(1) Reviewed the contractor's contraction

schedule, Design preparation, equipment

schedule for Mechanical works.

(2) Supervised and quality control of the

contractor's construction works for steel

construction.

(3) Prepared methodology of heavy

equipment operation in connection with

installation of the gates, penstock, etc.

(4) Calculated the bill and quantities of the

hydro mechanical equipment.

(5) Supervised works progress monitoring,

Daily, weekly & monthly progress report

and submitted to the team leader

Benanain Weir NTT Project Employer : PU

Client : Pt. Mettana

April 2002 up to Dec 2004 20 months

Mechanical Engineer.

Responsible for review design and quality

control of the mechanical works :

- Intake Gate, - Flushing Gate and Hoist : 1.5x 1.5m = 2 Units - Trash Rack : 5.0x12 m = 1 Unit - Regulating Gate and Hoist : 2.5x2.0m = 2 Unit - Upper and Lower Gates : 2.0x2.0m =3 Units

- Monorail Hoist : 1 Unit - All Electrical

His duty covered :

(1) Reviewed the contractor's contraction

schedule, Design preparation, equipment

schedule for Mechanical works.

(2) Supervised and quality control of the

contractor's construction works for steel

construction.

(3) Prepared methodology of heavy

equipment operation in connection with

installation of the gates, Electrical, etc.

(4) Calculated the bill and quantities of the

Dam hydro mechanical equipment.

(5) Supervised works progress monitoring,

Daily, weekly & monthly progress report

and submitted to the team leader

Tilong Dam NTT Project Employer : PU

Client : Pt. Mettana

Feb 2000 up to April 2002 26 months

Mechanical Engineer.

Responsible for review design and quality

control of the mechanical works :

- Intake Gate and Hoist. : 2.0x2.0m = 1 Unit - Steel penstock : 1.2mx 250m - Trash Rack : 2.2mx4.5m = 1 Unit - Bonneted Slide Gate : 1.5x1.5m = 1 Unit

- All Electrical

His duty covered :

(1) Reviewed the contractor's contraction

schedule, Design preparation, equipment

schedule for Mechanical works.

(2) Supervised and quality control of the

contractor's construction works for steel

construction.

(3) Prepared methodology of heavy

equipment operation in connection with

installation of the gates, penstock, etc.

(4) Calculated the bill and quantities of the

Dam hydro mechanical equipment.

(5) Supervised works progress monitoring,

Daily, weekly & monthly progress report

and submitted to the team leader

Batu Bulan Dam NTB Project Employer : PU

Client : Pt. Mettana

Nov 1999 up to Dec 2002 25 months

Mechanical Engineer.

Responsible for review design and quality

control of the mechanical works :

- Intake Gate and Hoist. : 2.0x2.0m = 1 Unit - Flushing Gate and Hoist : 1.5x1.5m = 1 Unit - Trash Rack 2.0x3.5m = 1 Unit - Jet Flow Gate : 0.7m - Bonneted Slide gate : 2.0x2.0m = 1 Unit

- Monorail Hoist : 1 Unit

- Turbin (Micro Hydro) Lonyok 50 KW

- All Electrical

His duty covered :

(1) Reviewed the contractor's contraction

schedule, Design preparation, equipment

schedule for Mechanical works.

(2) Supervised and quality control of the

contractor's construction works for steel

construction.

(3) Prepared methodology of heavy

equipment operation in connection with

installation of the gates, Electrical, etc.

(4) Calculated the bill and quantities of the

hydro mechanical equipment.

(5) Supervised works progress monitoring,

Daily, weekly & monthly progress report

and submitted to the team leader

Telaga Tunjung Dam Project (Design) Employer : PU

Client : Pt. Binakarya

July 1999 up to Oct 1999 4 months

Mechanical Engineer.

Responsible for review design and quality

control of the mechanical works : - Steel Conduit

- Trash Rack

- Bonneted slide gate - Stop log

His duty covered :

(1) Reviewed the contractor's contraction

schedule, equipment schedule, for

Mechanical works.

(2) Prepared methodology of heavy

equipment operation in connection with

installation of the steel conduit.

(3) Calculated the bill and quantities of the

hydro mechanical equipment. Sangiran Dam Project Employer : PU

Client : Pt. Binakarya

February 1999 up to May 1999 4 months

Mechanical Engineer.

Responsible for review design and quality

control of the mechanical works : - Stop log : 1.5x1.5m = 2 Units - Bonneted slide gate : 1.25x1.25m = 2 Units - Electrical - Monorail Hoist : 1 Unit His duty covered :

(1) Reviewed the contractor's contraction

schedule, Design preparation, equipment

schedule for Mechanical works.

(2) Supervised and quality control of the

contractor's construction works for steel

construction.

(3) Prepared methodology of heavy

equipment operation in connection with

installation of the steel conduit.

(4) Calculated the bill and quantities of the

hydro mechanical equipment.

(5) Supervised works progress monitoring,

Daily, weekly & monthly progress report

and submitted to the team leader

Flood Semarang Project (Design) Employer : PU

Client : Asia Pasific

October 1998 up to Jan. 1999 4 months

Mechanical Engineer.

Responsible for review design and quality

control of the mechanical works : - Trash Rack and Stop log - Slide Gates and Screw Pump

His duty covered :

(1) Reviewed the contractor's contraction

schedule, Design preparation, equipment

schedule for Mechanical works.

(2) Prepared methodology of heavy

equipment operation in connection with

installation of the Slide gates.

(3) Calculated the bill and quantities of the

hydro mechanical equipment.

Nawangan Dam Project : Employer : PU Client : Pt. P. Karya

June 1998 up to Sept. 1998 4 months

Mechanical Engineer.

Responsible for review design and quality

control of the mechanical works : - Intake Gate : 8.0x6.0m = 3 Units - Sluice Gates : 0.7x0.7m = 3 Units

His duty covered :

(1) Reviewed the contractor's contraction

schedule, equipment schedule, for

Mechanical works.

(2) Supervised and quality control of the

contractor's construction works for steel

construction.

(3) Prepared methodology of heavy

equipment operation in connection with

installation of the gates.

(4) Calculated the bill and quantities of the

hydro mechanical equipment.

(5) Supervised works progress monitoring,

Daily, weekly & monthly progress report

and submitted to the team leader

Flood Way Dam Project East Java Employer : PU

Client : Pt. P. karya

October 1997 up to May 1998 8 months

Mechanical Engineer.

Responsible for review design and quality

control of the mechanical works :

- Spillway Gates : (15 m x 7.5m). = 5 Units - Stop Log : (15m x 1.75m) = 5 sets - Monorail Hoist : 1 Unit

His duty covered :

(1) Reviewed the contractor's contraction

schedule, equipment schedule, for

Mechanical works.

(2) Supervised and quality control of the

contractor's construction works for steel

construction.

(3) Prepared methodology of heavy

equipment operation in connection with

installation of the gates.

(4) Calculated the bill and quantities of the

hydro mechanical equipment.

(5) Supervised works progress monitoring,

Daily, weekly & monthly progress report

and submitted to the team leader

Bili-Bili Multi Purpose Dam Project South Sulawesi Employer : PU/PLN

Client : Pt. Binakarya

October 1996 up to Sept 1997 12 months

Mechanical Engineer.

Responsible for review design and quality

control of the mechanical works :

- Spillway Gates : 12.0x 8m = 2 Units. - Guard Gate : 2.5x2.5m = 1 Unit - Steel Penstock : 3.7m x 300m - Trash Rack : 9.5mx 15m - - Slide Gate : 1.2x1.2m = 1 Unit - Bulk Head Gate : 4.5x4.5m = 1Unit

- Turbins and Accs : 20 MW

His duty covered :

(1) Reviewed the contractor's contraction

schedule, equipment schedule, for

Mechanical works.

(2) Supervised and quality control of the

contractor's construction works for steel

construction.

(3) Prepared methodology of heavy

equipment operation in connection with

installation of the gates.

(4) Calculated the bill and quantities of the

hydro mechanical equipment.

(5) Supervised works progress monitoring,

Daily, weekly & monthly progress report

and submitted to the team leader

Darma Dam Project Employer : PU Client : Pt. Binakarya

Nov 1995 up to Sept 1996 10 months

Mechanical Engineer.

Responsible for review design and quality

control of the mechanical works :

- Intake Gate: 3.0x3.0 m = 1 Unit. - Guard Gate : 0.9m = 1 Unit : - Trash Rack : 3.5x3.5m = 1 Unit -

His duty covered :

(1) Reviewed the contractor's contraction

schedule, equipment schedule, for

Mechanical works.

(2) Supervised and quality control of the

contractor's construction works for steel

construction.

(3) Prepared methodology of heavy

equipment operation in connection with

installation of the gates.

(4) Calculated the bill and quantities of the

hydro mechanical equipment.

(5) Supervised works progress monitoring,

Daily, weekly & monthly progress report

and submitted to the team leader Bila Irrigation Project South Sulawesi Employer : PU

Client : Pt. Indahkarya July 1993 up to Jan 1994 7 months

Mechanical Engineer.

Responsible for review design and quality

control of the mechanical works :

- Intake Gate

: 3.0x2.5m = 3 Units. - Under Sluice Gate : 3.0x1.5m = 3 Units - Trash Rack : 1 Unit

His duty covered :

(1) Reviewed the contractor's contraction

schedule, equipment schedule, for

Mechanical works.

(2) Supervised and quality control of the

contractor's construction works for steel

construction.

(3) Prepared methodology of heavy

equipment operation in connection with

installation of the Sluice gate.

(4) Calculated the bill and quantities of the

hydro mechanical equipment.

(5) Supervised works progress monitoring,

Daily, weekly & monthly progress report

and submitted to the team leader

Pertamina Plant Project at Cilacap

End of April 1992 up to June 1993

Mechanical Engineer.

Responsible for review design and quality

control of the mechanical works :

- Pressure Vessel : 15 Bar - Fuel Tank : 10000 m3 - Heat Exchanger.: 1500 m2

His duty covered :

(1) Responsible for review design and

Recommendation of the mechanical works

for tank wall & valves equipment.

(2) Evaluation of quantity and quality of steel

materials for the tank wall and valves

equipment.

(3) Determined the leaked test procedure for

quality control and their results of the

valves installation.

(4) Prepared methodology of heavy

equipment operation in connection with

installation of the intake gate installation.

(5) Calculated the bill and quantities of the

Dam hydro mechanical equipment.

Sidorejo Nyrtec Project Central Java Employer : PU

Client : Pt. Indahkarya

August 1991 up to April 1992 8 months

Mechanical Engineer.

Responsible for review design and quality

control of the mechanical works :

- Avio Gate (Automatic System) - Amil Gate (Automatic System) - Avis Gate (Automatic System)

- Distributor Gate

His duty covered :

(1) Reviewed the contractor's contraction

schedule, equipment schedule, for

Mechanical works.

(2) Supervised and quality control of the

contractor's construction works for steel

construction.

(3) Prepared methodology of heavy

equipment operation in connection with

installation of the AVIO, and AVIS gate.

(4) Calculated the bill and quantities of the

hydro mechanical equipment.

(5) Supervised works progress monitoring,

Daily, weekly & monthly progress report

and submitted to the Co-team leader

Dumpil Dam Project Central Java Employer : PU

Client : Pt. Indahkarya

Sept. 1989 up to Octl 1990 12 months

Mechanical Engineer.

Responsible for review design and quality

control of the mechanical works :

- Fixed Wheel Gate (10 mx7.5 m) : 5 Units - Sluice Gate and Hoist (2.5mx3.0m) : 1 Unit - Stop log (10 mx 1.6m) : 5 Units - Gantry Crane Hoist : 1 Sets

His duty covered :

(1) Reviewed the contractor's contraction

schedule, equipment schedule, for

Mechanical works.

(2) Supervised and quality control of the

contractor's construction works for steel

construction.

(3) Prepared methodology of heavy

equipment operation in connection with

installation of the intake gate.

(4) Calculated the bill and quantities of the

hydro mechanical equipment.

(5) Supervised works progress monitoring,

Daily, weekly & monthly progress report

and submitted to the Co-team leader

Riam Kanan Weir Project Central Java Employer : PU Client : Pt. Yodyakarya Sept 1988 up to Augt 1989 11 months

Mechanical Engineer.

Responsible for review design and quality

control of the mechanical works :

- Intake Gate and Hoist : 2.5x2.5m = 4 Units - Upper Gate and Hoist : 2.5x3.5m = 4 Units - Lower Gate and Hoist : 2.5x1.5m = 4 Units - Trash Rack : 2.0x 5 m = 1 Unit - Waste way Gate and Hoist = 3x3m = 1 Unit

His duty covered :

(1) Reviewed the contractor's contraction

schedule, equipment schedule, for

Mechanical works.

(2) Supervised and quality control of the

contractor's construction works for steel

construction.

(3) Prepared methodology of heavy

equipment operation in connection with

installation of the intake gate.

(4) Calculated the bill and quantities of the

hydro mechanical equipment.

(5) Supervised works progress monitoring,

Daily, weekly & monthly progress report

and submitted to the Co-team leader

Sedadi Weir Project Central Java Employer : PU Client : Pt. Indahkarya April 1988 up to Augt 1989 15 months

Mechanical Engineer.

Responsible for review design and quality

control of the mechanical works :

- Intake Gate : 2.25x2.25m = 3 units - Sluice Gate : 2.25x1.5m = 3 units - Trash Rack = 1 Unit - Stop log : 2.25x1.2m = 2 sets - Monorail Hoist : 1 Unit

His duty covered :

(1) Reviewed the contractor's contraction

schedule, equipment schedule, for

Mechanical works.

(2) Supervised and quality control of the

contractor's construction works for steel

construction.

(3) Prepared methodology of heavy

equipment operation in connection with

installation of the intake gate.

(4) Calculated the bill and quantities of the

hydro mechanical equipment.

(5) Supervised works progress monitoring,

Daily, weekly & monthly progress report

and submitted to the Co-team leader

Sugar Plant Project Client : Pt. Brt Ind. June 1989 up to Dec 1989 7 months

Mechanical Engineer.

Responsible for review design and quality

control of the mechanical works :

- Cook Pan. - - Over Head Crane : 20 Tons - Fuel Tank : 20000 m3 l - Juice Heater

His duty covered :

(1) Responsible for review design and

Recommendation of the mechanical works

for tank wall & valves equipment.

(2) Evaluation of quantity and quality of steel

materials for the tank wall and valves

equipment.

(3) Determined the leaked test procedure for

quality control and their results of the

valves installation.

(4) Prepared methodology of heavy

equipment operation in connection with

installation of the intake gate installation.

(5) Calculated the bill and quantities of the

hydro mechanical equipment. Pertamina Plant Project at Cilacap Client : Pt. Brt Ind. Feb 1988 up to Sept 1988 8 months

Mechanical Engineer.

Responsible for review design and quality

control of the mechanical works :

- Pressure Vessel : 50 Bar - Fuel Tank : 15000 m3

- Heat Exchanger.: 2000 m2

His duty covered :

(1) Responsible for review design and

Recommendation of the mechanical works

for tank wall & valves equipment.

(2) Evaluation of quantity and quality of steel

materials for the tank wall and valves

equipment.

(3) Determined the leaked test procedure for

quality control and their results of the

valves installation.

(4) Prepared methodology of heavy

equipment operation in connection with

installation of the intake gate installation.

(5) Calculated the bill and quantities of the

hydro mechanical equipment.

Wadas Lintang Dam Project Employer : PU

Client : Pt. Brt Ind. May 1987 up to Nov 1987 7 months

Mechanical Engineer.

Responsible for review design and quality

control of the mechanical works :

Draft Tube Gate : 2.5x 1.5m = 1 Unit

His duty covered :

(1) Reviewed the contractor's contraction

schedule, equipment schedule, for

Mechanical works.

(2) Supervised and quality control of the

contractor's construction works for steel

construction.

(3) Prepared methodology of heavy

equipment operation in connection with

installation of the Draft Tube gate.

(4) Calculated the bill and quantities of the

hydro mechanical equipment.

(5) Supervised works progress monitoring,

Daily, weekly & monthly progress report

and submitted to the Co-team leader

Talang Dam Project Employer : PU

Client : Pt. P. karya Nov 1986 up to March 1987 7 months

Mechanical Engineer.

Responsible for review design and quality

control of the mechanical works :

- Hoisting Equipment 40 tons. - Steel Slide Gate : 8x8.0m = 4 Units

- Trash Rack

His duty covered :

(1) Reviewed the contractor's contraction

schedule, equipment schedule, for

Mechanical works.

(2) Supervised and quality control of the

contractor's construction works for steel

construction.

(3) Prepared methodology of heavy

equipment operation in connection with

installation of the Steel Slide Gate.

(4) Calculated the bill and quantities of the

hydro mechanical equipment.

(5) Supervised works progress monitoring,

Daily, weekly & monthly progress report

and submitted to the Co-team leader. PLTU Tello Project : 2 x 12.5 MW Employer : PLN

Client : Pt. Brt Ind.

March. 1985 up to Juj. 1986 16 months

Mechanical Engineer.

Responsible for review design and quality

control of the mechanical works :

- Steam drum and water drum. - Steel structure and Colum. - Piping - Trash Screen

His duty covered :

(1) Reviewed the contractor's contraction

schedule, equipment schedule, for

Mechanical works.

(2) Supervised and quality control of the

contractor's construction works for steel

construction.

(3) Prepared methodology of heavy equipment operation in connection with installation of the Steel structure, steam/water drum.

(4) Calculated the bill and quantities of the

mechanical equipment.

(5) Supervised works progress monitoring,

Daily, weekly & monthly progress report

and submitted to the Co-team leader. PLTU T. Perak Project : 2x 50 MW

Employer : PLN

Client : Pt. Brt Ind. March. 1984 up to Jun. 1985 15 months

Mechanical Engineer.

Responsible for review design and quality

control of the mechanical works :

- Steam drum and water drum. - Steel structure and Colum.

- Piping

His duty covered :

(1) Reviewed the contractor's contraction

schedule, equipment schedule, for

Mechanical works.

(2) Supervised and quality control of the

contractor's construction works for steel

construction.

(3) Prepared methodology of heavy

equipment operation in connection with

installation of the Steel structure, colum, Piping etc.

(4) Calculated the bill and quantities of the

mechanical equipment.

(5) Supervised works progress monitoring,

Daily, weekly & monthly progress report

and submitted to the Co-team LNG Project (ABB)

Employer : Pt. Bontang

Client : Pt. Brt Ind. Feb. 1982 up to Jan. 1984 23 months

Mechanical Engineer.

Responsible for review design and quality

control of the mechanical works :

- Pressure Vessel Equipment : 30 Bar. - Heat Exchanger 2500 m2.

- Piping

- Ducting.Piping

His duty covered :

(1) Reviewed the contractor's contraction

schedule, equipment schedule, for

Mechanical works.

(2) Supervised and quality control of the

contractor's construction works for steel

construction.

(3) Prepared methodology of heavy

equipment operation in connection with

installation of the Vessel, HE etc.

(4) Calculated the bill and quantities of the

mechanical equipment.

(5) Supervised works progress monitoring,

Daily, weekly & monthly progress report

and submitted to the Co-team leader.

116