&hqwudo 6wdwhv 0dqxidfwxulqj -...

Lubbock, Texas(866) 744-7092

Artesia, New Mexico (575) 746-9299

Carlsbad, New Mexico (575) 887-9998

Hobbs, New Mexico (800) 333-0222

Distributed by:

www.Steel-Depot.com





Distributed by:

www.Steel-Depot.com





INDEXInformation in the catalog may vary by plant location.

Please call your salesperson to verify product availability.

Notice: The application and detail drawings in this manual are strictly for illustration purposes and may not be applicable to all building designs or product installations. Projects should conform to local building codes. Central States Manufacturing is not responsible for the performance of the material if it is not installed correctly.

Information contained in the booklet was in effect at the time of publication and is subject to change without notice.

1.0

Storage & Handling ................................................................................2

Features & Benefits ................................................................................3UL Approval ...........................................................................................4ICBO Approval.......................................................................................4Load Tables .............................................................................................5General Description ................................................................................6

Features & Benefits ................................................................................8UL Approval ...........................................................................................9FM Approval...........................................................................................9Florida Building Code Approval............................................................9Insulation/Thermal Spacer Selection Chart.........................................10Load Tables ...........................................................................................11General Description ..............................................................................12

Seaming Tool Rental Agreement ................................................... 13-14Number of Square Feet per Panel charts ....................................... 15-16Product List ..................................................................................... 17-29Warranty Information ..................................................................... 30-34

Revised 2011

Deliveries will be made using a tractor/trailer weighing approximately 80,000 lbs. It is imperative that all delivery locations be accessible by a vehicle of this size. Our drivers have the authority to refuse delivery to any location they see as unsafe or inaccessible. The customer is responsible for any charges incurred if truck is detained for any reason. The customer is responsible for unloading all trucks. Any damage that occurs at this point is the customer’s responsibility. There must be either equipment or at least 3 people to unload truck.

Storage and Handling

Galvalume and galvanized steel sheets have a good service life when exposed to normal weather conditions however, to protect the appearance of panels and trims from damage, there are a few simple precautions that can be taken. The steel sheets are subject to stain when water sits upon, or becomes trapped between the sheets. If the Galvalume/galvanized sheets are to be stored for any period of time, they should be stored only in a dry place, preferably under a roof. Stand panels on end and fan them out at the bottom to provide air circulation and moisture run off. If space does not allow this, the panels should be separated, blocked off of the floor at least 12 inches to allow air flow, and stored at an incline to encourage drainage. The panels should then be covered, yet still have good air flow through the sheets to prevent condensation. Do not use a plastic cover, as this may cause the panels to sweat or condensation to occur.

Failure to follow these steps may result in wet storage stains and premature rusting.

The manufacturer’s warranty will be void at this time, and the manufacturer will not be responsible.

When unloading panels, extreme caution must be employed. Care needs to be used when unloading panels with a forklift. Panel edges and underside paint

may become damaged if the forklift driver does not use caution. Once in the jobsite, care must be taken in order to protect the painted surface. When unbundling the panels, never drag them across the surface of one another. This may cause scratches across the underneath panels. It is recommended that the panels be “rolled” off the top ofthe bundle to prevent scratching. Never lift panels bythe ends, instead lift the panels longitudinally andcarry vertically.

Panel edges are very sharp, therefore, safety equipment should be worn by all workers handling the material.

Cutting

A portable field shear is the ideal method for cutting panels. Nibblers or a power shear may also be used. Although we do not recommend it, if you decide to cut with a saw, it is very important that the panels be turned upside down during cutting so that hot shavings do not come in contact with the painted surface. Make sure all adjacent panels are covered so that shavings are not imbedded in these panels. If metal shavings become imbedded in the paint surface, they will quickly rust. To avoid this, panels should be thoroughly wiped of all filings on both sides of the panel. Failure to comply with the recommended cutting procedures releases the manufacturer of any responsibility.

Drilling

Panels should not be drilled while stacked. This will cause shavings that will become imbedded in the paint surface.

2.0

Delivery

Care and Handling

Revised 2011

1. Weather-tight 3” high standing seam with concealed clips and fasteners

2. Factory applied hot melt seam and clip sealant

3. Large selection of clip sizes to accommodate various types of construction and insulation thicknesses

4. Tested in accordance with ASTM E-1680 (air infiltration)

5. Tested in accordance with ASTM E-1646 (water infiltration)

6. Floating roof clips allow for thermal movement

7. Tested in accordance with ASTM E 1592

8. Tested in accordance with UL580 meeting UL90 wind uplift requirements

9. Pre-punched panels combined with self-engaging backup plates for ease of installation

10. requires no field seaming and is a “snap together” roof system

11. Central Seam Plus is a field seamed panel with better uplift and infiltration values

12. An 18” wide panel is available for a clean finish at the rake

13. With reversible end for end panels, each side of the roof can be installed simultaneously

14. Panels are factory notched for ease of installation at the endlap

15. Available in Galvalume Plus® or painted in a wide variety of long life colors

3.0

FEATURES AND BENEFITS

Revised 2011

Constructionnumber

180B205

205A286

308B534535536537541

Panel Width (Inches)

24242424242424242424

Gauge

24 min.24 min.24 min.24 min.24 min.24 min.24 min.24 min.24 min.26 min.

Clip Type

AABCABABBB

Clip Spacing

5’-0”5’-0”5’-0”5’-0”5’-0”

5’-0 1/4”5’-0 1/4”

5’-0”5’-0 1/4”

5’-0”

Substrate

CompositeOpen FramingOpen Framing

PlywoodComposite

Open FramingOpen Framing

CompositeCompositePlywood

UL-2218 Impact Resistance

Class 4Class 4Class 4Class 4Class 4Class 4Class 4Class 4Class 4Class 4

UL-263Fire Rating

Class AClass AClass AClass AClass AClass AClass AClass AClass AClass A

UL-580 Rating

Class 90Class 90Class 90Class 90Class 90Class 90Class 90Class 90Class 90Class 90

UNDERWRITERS LABORATORIES APPROVAL

Clip Type: A (Fixed or Floating); B (Floating); C (Utility).

NOTES:

1. Wind uplift test procedures are in accordance with Underwriters Laboratories Standard UL-580 under “Tests For Uplift Resistance of Roof Assemblies.” 2. A detailed installation method is available for each Construction Number above and can be found in the UL Roofing Materials and Systems Directory or at http://www.ul.com. The panels must be installed in a certain manner to achieve the published results. 3. The panel qualifies for a Class A fire rating in compliance with Underwriters Laboratories Standard UL-263. 4. The panel system is listed under the following Fire Resistance Design Numbers: P224, P225, P227, P230, P233, P237, P265, P268, P508, P510, P512, P701, P711, P715, P717, P720, P722, P724, P726, P731, P734, P736, P801, P803, P814, P815, P819, P821, P823. Refer to the UL Fire Resistance Directory for specific construction methods and hourly ratings. 5. panels carry a Class 4 rating under UL-2218 “Test Standard for Impact Resistance”.

4.0Revised 2011

ICBO APPROVALThe ICBO Evaluation Service, Inc., has approved the roofing system details, en-gineering, calculations, computer printouts and product data. This information has been found to comply with 1997 UBC Code and is listed in evaluation report number ER-5409. A copy of this report is available on request.

2007 FLORIDA BUILDING CODE PRODUCT APPROVAL Roofing System details and engineering load tables have been examined by the State of Florida and comply with the 2007 Florida Building Code Product Approval Number (FL 14016.1, 14026.1, 14026.2, 14026.3).

19 3/8”

PANEL24” Coverage

ALLOWABLE UNIFORM LOADS IN POUNDS PER SQUARE FOOT

SPANTYPE

1-SPAN2-SPAN3-SPAN4-SPAN

LOADTYPE

LIVE LOADLIVE LOADLIVE LOADLIVE LOAD

2.5204.0204.0204.0204.0

3.0170.0170.0170.0170.0

3.5145.7145.7145.7145.7

4.0127.5118.7127.5127.5

4.5113.393.8113.3109.4

5.092.175.994.988.6

5.576.162.878.473.2

SPAN IN FEET24 Gauge (Fy = 50 KSI)

NOTES:

1. Allowable loads are based on uniform span lengths and panel yield strength (Fy) of 50 ksi. 2. LIVE LOAD is an allowable live load limited by shear & bending or web crippling. 3. Above loads consider a maximum deflection ratio of L/240. 4. Weight of the panel has not been deducted from allowable loads. 5. Contact CSMI for wind uplift values.

5.0Revised 2011

13 3/8”

18”

18” Coverage


SPANTYPE

1-SPAN2-SPAN3-SPAN4-SPAN

LOADTYPE


2.5272.0272.0272.0272.0

3.0226.7226.7226.7226.7

3.5194.3194.3194.3194.3

4.0170.0158.9170.0170.0

4.5145.6125.5151.1146.5

5.0117.9101.7127.1118.7

5.597.584.0105.198.1


24”, 18”

PANELGENERAL DESCRIPTION

Coverage Width - 24” with minor ribs - prepunched 6 holes or no punching 18” with minor ribs - prepunched 5 holes or no punchingMinimum Slope - 1/4:12Panel Attachment - Low, high (fixed or floating), or utility (no insulation clearance)Panel Substrate - Galvalume Plus® (standard)Gauge - 24Finishes - Smooth with minor ribsCoatings - CentralGuardTM, Kynar 500®/Hylar 5000®

Note: Oil canning in the flat area of the panels is common to the industry and does not affect the integrity of the panel. Therefore, oil canning is not a reason for rejection.

CAUTION:

Diaphragm capabilities and purlin stability are not provided by CSMI’s Roof system. Therefore, other bracing may be required to conform to A.I.S.C. or A.I.S.I. specifications.

6.0

PRODUCT SELECTION CHART

Revised 2011

FINISH KYNAR 500®/HYLAR 5000®

CENTRALGUARDTM GALVALUMEPLUS®

24 ga. Regal White 24 ga. 24 ga.PRODUCT

24” Wide

18” Widel

l

l

l

l

l

l - Available in any quantity.CentralGuardTM colors may require a minimum quantity.Kynar 500®/Hylar 5000® Regal White available in any quantity. Minimum quantity may be requiredfor other colors.

In order to design, quote or order a roof system, you must determine which system you need, based on building width and insulation requirements.

Low Fixed System - Double slope buildings 200’ wide or less and single slope buildings 100’ wide or less, with or without a 3/8” thermal spacer. See Insulation/Thermal Spacer Selection Chart below.

High Fixed System - Double slope buildings 200’ wide or less and single slope buildings 100’ wide or less, with 3/8”, 5/8”, or 1” thermal spacers. See Insulation/Thermal Spacer Selection Chart below.

Fixed systems utilize fixed clips that do not allow the roof panels to float on the substructure. For this reason, use fixed systems only on pre-engineered metal buildings with purlins, subject to the building width restrictions outlined above. Do not use fixed systems on buildings with bar joist construction, wood decks or metal decks.

Low Floating System - Double slope buildings over 200’ wide or single slope buildings over 100’ wide, with or without 3/8” thermal spacer. See Insulation/Thermal Spacer Selection Chart below.

High Floating System - Double slope buildings over 200’ wide or single slope buildings over 100’ wide, with 3/8”, 5/8” or 1” thermal spacer. See Insulation/Thermal Spacer Selection Chart below.

Thermal calculations should be performed for each project to ensure that the thermal movement of the roof is not greater than the floating clip’s capacity. Various densities of blanket insulation may affect the installation and or the appearance of a metal roof system. The installer is responsible for selecting the proper clip and thermal spacer for their conditions.

CAUTIONApplication and design details are for illustration purposes only, and may not be appropriate for all environmentalconditions or building designs. Projects should be engineered to conform to applicable building codes, regulations,

and accepted industry practices.

CAUTIONis a snap together system. Use of a mechanical seaming tool on the

system will void all warranties.

Notes: 1. As with all standing seam roof systems, sound attenuation (example: blanket insulation) is required between the panel and the

substructure to prevent “roof rumble” during windy conditions. Some composite roof systems may require additional acoustical consideration to ensure that thermal vibration noises are isolated from the building interior. Contact your architect and/or engineer for proper acoustical design.

2. All metal roof systems should be designed by a registered, professional engineer for loads specified by the governing code, including the higher pressures encountered at the edge zones of the roof.

IMPORTANTREAD THIS FIRST

Insulation/Thermal Spacer Selection Chart Insulation Thickness Low System High System No Insulation 3/8” Thermal Spacer N/A 3” Insulation N/A 1” Thermal Spacer 4” Insulation N/A 5/8” Thermal Spacer 6” Insulation N/A 3/8” Thermal Spacer

7.0Revised 2011

ENGINEERING

1. DESIGN INTEGRITY The begins and ends in the high, reducing the risk of leakage at the rake that can occur when finishing in the low. The panel seam is sealed with a factory-applied hot-melt mastic, a superior grade to mastics applied in the field.

2. FLOATING ROOF The roof was designed to cope with the forces of expansion and contraction. This is accomplished by allowing the panels to freely move up and down the roof slope.

3. FLOATING CLIPS The Standard Floating clip is available for the system. The Standard clip allows for a total of two inches of thermal movement and is constructed from 14 gauge material. The clip provides a 3/8” or 1 3/8” clearance at the purlin to reduce water ponding on low pitch roofs. Constructed from 12 gauge material, this clip is an integral part of maintaining panel module.

4. UL 90 RATING The roof system has 7 different UL Class 90 construction numbers, each of which is available with several options.

5. FIRE RESISTANCE RATINGS The roof system qualifies for use in several UL design assemblies and carries a UL “Class A” fire rating.

6. SIMPLICITY No troublesome batten cap is needed. The panels simply seam together forming a watertight seal.

7. FLEXIBILITY The roof system offers welcome flexibility to the erector. Wall covering can be erected before or after the roof is installed. Panel installation is an uninterrupted procedure.

8. EASE OF INSTALLATION The erector has the option to sheet each side of the roof separately or both sides simultaneously, which greatly increases the speed and convenience of erection. Being reversible end-for-end, sheets do not have to be special ordered for each side of the building. No field notching of panels at endlaps or ridge is required.

9. FORGIVING SYSTEM The design allows for the roof to be finished in the high when an out-of-square condition or other factors cause the roof to terminate up to 4” from the steel line.

10. BUILDING LENGTH Odd, as well as even, footage buildings can be terminated at a major rib with the use of our 18” panel or by field bending the panel.

11. PREPUNCHED PANELS AND COMPONENTS CSMI’s prepunched system, combined with self-engaging back-up plates, assures panel module and speeds roof installation.

12. DURABILITY Every unpainted panel is manufactured from Galvalume Plus®, your assurance of the CSMI commitment to quality.

13. COLOR AND FINISHES is available in a wide variety of popular colors in two different paint systems. Please contact CSMI for color availability and lead times.

FEATURES AND BENEFITS

8.0Revised 2011

Constructionnumber

165180C287

308A450538539540

Panel Width (Inches)

2424242424242424

Gauge

24 min.24 min.24 min.24 min.24 min.24 min.24 min.24 min.

Clip Type

BBBBB

A, BA, BA, B

Clip Spacing

5’-0”5’-0”5’-0”5’-0”

5’-0 1/4”5’-0”5’-0”

Substrate

Open FramingComposite

Open FramingComposite

Open FramingOpen Framing

CompositeComposite

UL-2218 Impact Resistance

Class 4Class 4Class 4Class 4Class 4Class 4Class 4Class 4

UL-263Fire Rating

Class AClass AClass AClass AClass AClass AClass AClass A

UL-580 Rating

Class 90Class 90Class 90Class 90Class 90Class 90Class 90Class 90

Clip Type: A (Floating); B (Sliding).

NOTES: 1. Test procedures are in accordance with Underwriters Laboratories Standard UL-580 under “Tests for Uplift Resistance of Roof Assemblies”. 2. A detailed installation method is available for each Construction Number above and can be found in the UL Roofing Materials and Systems Directory. The panels must be installed in a certain manner to achieve the published results when installed over a Class A substructure. 3. The panel qualifies for a Class A fire rating in compliance with Underwriters Laboratories Standard UL-263. 4. The panel system is listed under the following Fire Resistance Design Numbers: P224, P225, P227, P230, P233, P237, P265, P268, P508, P510, P512, P701, P711, P715, P717, P720, P722, P724, P726, P731, P734, P736, P801, P803, P814, P815, P819, P821, and P823. Refer to the UL Fire Resistance Directory for specific construction methods and hourly ratings. 5. Construction Number 450 includes the use of a domed skylight.

UNDERWRITERS LABORATORIES APPROVAL

9.0 Revised 2011

ICBO APPROVALThe ICBO Evaluation Service, Inc., has approved the roofing system details, engineering, calculations, computer print-outs and product data. This information has been found to comply with 1997 UBC Code and is listed in evaluation report number ER-5409. A copy of this report is available on request.

FLORIDA 2007 BUILDING CODE PRODUCT APPROVALCentral-Seam Plus Roofing System details and engineering load tables have been examined by the State of Florida and comply with the 2007 Florida Building Code Product Approval Number (FL14016.2, 14016.3)

Low Floating System - With or without 3/8” thermal spacer. See Insulation/Thermal Spacer Selection Chart below.

High Floating System - With 3/8”, 5/8” or 1” thermal spacer. See Insulation/Thermal Spacer Selection Chart below.

Thermal calculations should be performed for each project to ensure that the thermal movement of the roof is not greater than the floating clip’s capacity. Various densities of blanket insulation may affect the installation and or the appearance of a metal roof system. The installer is responsible for selecting the proper clip and thermal spacer for their conditions.

CAUTIONApplication and design details are for illustration purposes only, and may not be appropriate for all environmental conditions or building designs. Projects should be engineered to conform to applicable building codes, regulations, and accepted industry practices.

CAUTIONThe use of any field seaming machine other than that provided by the manufacturer may damage the panels, void all warranties and will void all engineering data.

IMPORTANTREAD THIS FIRST

Thermal Spacer DisclaimerThe above thermal spacer chart is intended to be used as a general guideline only. Because of the various densities of insulation currently avail-able, the manufacturer cannot guarantee that this chart will be accurate in all situations. Further, the manufacturer does not specifically require that the roofing contractor use thermal spacers with its roof system. However, please review the following information:

• Although the manufacturer does not require a thermal spacer, the architect or building owner may.• In certain environments, the compression of the fiberglass insulation, without a thermal spacer, may create a thermal break which

can cause condensation to form on the purlins/joists.• On uninsulated buildings, eliminating the thermal spacer: (1) may cause “roof rumble” and (2) you may encounter problems

holding panel module.• When a high clip is used without a thermal spacer: (1) you may encounter problems holding panel module and (2) foot traffic on

the panel ribs may result in bent clips.• Using a low clip with too much insulation or too thick a thermal spacer: (1) may cause “purlin read” (2) may cause difficulty in

properly installing the panel side laps, and (3) you may encounter problems holding panel module.

Insulation/Thermal Spacer Selection Chart Insulation Thickness Low System High System No Insulation 3/8” Thermal Spacer N/A 3” Insulation N/A 1” Thermal Spacer 4” Insulation N/A 5/8” Thermal Spacer 6” Insulation N/A 3/8” Thermal Spacer

NOTES: 1. As with all standing seam roof systems, sound attenuation (example: blanket insulation) is required between the panel and the

substructure to prevent “roof rumble” during windy conditions. Some composite roof systems may require additional acoustical consideration to ensure that thermal vibration noises are isolated from the building interior. Contact your architect and/or engineer for proper acoustical design.

2. The following are examples of conditions that may cause condensation: (A) Projects where outside winter temperatures below 40°F are anticipated and where average winter interior relative humidity of 45% or greater is expected. (B) Building usages with high humidity interiors, such as indoor swimming pools, textile manufacturing operations, food paper or other wet-process industrial plants. (C) Construction elements that may release moisture after the roof is installed, such as interior concrete and masonry, plaster finishes and fuel burning heaters. Manufacturer is not responsible for determining if condensation will be an issue on any particular application.

ENGINEERING

10.0Revised 2011

19 3/8”

PANEL24” Coverage


SPANTYPE

SINGLE2-SPAN3-SPAN4-SPAN

LOADTYPE


2.5142.3128.0145.5140.0

3.0118.6106.7121.2116.7

3.5101.691.4103.9100.0

4.088.980.090.987.5

4.579.171.180.877.8

5.071.264.072.770.0

5.564.758.266.163.6


NOTES:

1. Allowable loads are based on uniform span lengths. 2. LIVE LOAD is limited by bending, shear, combined shear & bending, or web crippling. 3. Above loads consider a maximum deflection ratio of L/180. 4. Panel weight has not been deducted from allowable loads. 5. The use of any field seaming machine other than those provided by the manufacturer will void all engineering data. 6. Contact CSMI for wind uplift values.

Revised 2011

13 3/8”

18”

18” Coverage


SPANTYPE

SINGLE2-SPAN3-SPAN4-SPAN

LOADTYPE


2.5142.3128.0145.5140.0

3.0118.6106.7121.2116.7

3.5101.691.4103.9100.0

4.088.980.090.987.5

4.579.171.180.877.8

5.071.264.072.770.0

5.564.758.266.163.6


11.0

24”, 18”

GENERAL DESCRIPTION

Coverage Width - 24” with minor ribs - prepunched 6 holes or no punching 18” with minor ribs - prepunched 5 holes or no punchingMinimum Slope - 1/4:12Panel Attachment - Low, high (fixed or floating), or utility (no insulation clearance)Panel Substrate - Galvalume Plus® (standard)Gauge - 24Finishes - Smooth with minor ribsCoatings - CentralGuardTM, Kynar 500®/Hylar 5000®

Note: Oil canning in the flat area of the panels is common to the industry and does not affect the integrity of the panel. Therefore, oil canning is not a reason for rejection.

CAUTION:

Diaphragm capabilities and purlin stability are not provided by CSMI’s Roof system. Therefore, other bracing may be required to conform to A.I.S.C. or A.I.S.I. specifications.

PRODUCT SELECTION CHART

12.0

PANEL

Revised 2011

FINISH KYNAR 500®/HYLAR 5000®

CENTRALGUARDTM GALVALUMEPLUS®

24 ga. Regal White 24 ga. 24 ga.PRODUCT

24” Wide

18” Widel

l

l

l

l

l

l - Available in any quantity.CentralGuardTM colors may require a minimum quantity.Kynar 500®/Hylar 5000® Regal White available in any quantity. Minimum quantity may be requiredfor other colors.

13.0

Seaming Tool Rental Agreement

Revised 2011

Thank you for placing your standing seam order with Central States Mfg. As you know, the panel you have ordered requires a seaming tool for proper installation. We would like to give you some basic tips in processing the seamer rental agreement that will help ensure a timely and efficient delivery.

Tip 1: Please make sure you complete your Seaming Tool Rental Agreement in full. Any information not provided may cause a delay in the shipment of your seamer.Tip 2: When complete, please sign and date where indicated and return to your sales representative. Agreements without a signature will not be scheduled.Tip 3: Please allow a minimum standard lead time of 10 business days from the day the agreement is received by Central States until the date required on job site. It is advised that the seamer agreement be turned in with the panel order to ensure a coordinated delivery.Tip 4: We realize there will be occasions when a less than 10 day lead time is required. In those extreme cases, we will do everything to try and accommodate the request, however, we are limited to availability based on the date required. Your Central States sales representative must review availability before we can commit to your request.Tip 5: Rental charges begin the day a seaming tool ships and continue until the day that seaming tool is returned/received at Central States. Please make sure you do not incur additional charges by returning it immediately after use.Tip 6: Central States does charge freight in addition to the rental charges. Freight charges apply to each individual package shipped.Tip 7: Standard delivery time is two business days from the day the seamer leaves the Central States facility.Tip 8: The tools are shipped in a locked box and the combination is on the rental form.Tip 9: Return instructions are included on both the outside and inside of the box.Tip 10: When multiple seaming tools are being returned, please insure that all equipment is in the correct box. All boxes and equipment are labeled with a unique identifying number.Tip 11: Please return the seaming tools in a clean and working condition. Additional charges will be incurred for the repair of damaged and/or abused equipment and shipping boxes.Tip 12: Although you are solely responsible for managing the rental time frame, we may contact you on a periodic basis to insure that your project is progressing and that you are still in need of the seaming equipment. This is a friendly reminder to keep you from incurring additional cost on your project.

Our seaming tools are shipped on a first come, first served basis. Please take the proper steps on the frontend of your order so we can satisfy your seamer needs.

Thank you for your order and for taking the time to read these tips. We hope it helps you in your futurerequests for seamers. Our goal is to provide you with a pleasant rental experience. Your feedback is encouraged and appreciated.

14.0

Estimated Seamer Tool Rental Costs

Revised 2011

Seamer Tools

By the Day $40.00

By the Week $150.00

By the Month $500.00

Estimated Freight $200.00 each way

Replacementcost $9,705.00

Hand Crimper

By the Week $20.00

By the Month $65.00

Freight $75.00 each way

To calculate the estimated usage time use the following formula:

24” wide – Divide the roof square footage by 4800. This will be the required days to seam the roof.

18” wide - Divide the roof square footage by 3600. This will be the required days to seam the roof.

THESE ARE ONLY GUIDELINES. ALWAYS GIVE YOURSELF EXTRA DAYS TO ALLOW FOR UNEXPECTED JOBSITE CONDITIONS.

Calculation is based upon average times for 8 hour workdays. Adjust your formula for your specific work schedule. Time calculation does not include shipping time. Actually usage time will vary depending upon crew expertise.

15.0

19 3/8” 19 3/8”

Number of Square Feet Per Panel

FEET123456789

10111213141516171819202122232425262728293031323334353637383940

0”2.004.006.008.00

10.0012.0014.0016.0018.0020.0022.0024.0026.0028.0030.0032.0034.0036.0038.0040.0042.0044.0046.0048.0050.0052.0054.0056.0058.0060.0062.0064.0066.0068.0070.0072.0074.0076.0078.0080.00

1”2.174.176.178.17

10.1712.1714.1716.1718.1720.1722.1724.1726.1728.1730.1732.1734.1736.1738.1740.1742.1744.1746.1748.1750.1752.1754.1756.1758.1760.1762.1764.1766.1768.1770.1772.1774.1776.1778.1780.17

2”2.334.336.338.33

10.3312.3314.3316.3318.3320.3322.3324.3326.3328.3330.3332.3334.3336.3338.3340.3342.3344.3346.3348.3350.3352.3354.3356.3358.3360.3362.3364.3366.3368.3370.3372.3374.3376.3378.3380.33

3”2.504.506.508.50

10.5012.5014.5016.5018.5020.5022.5024.5026.5028.5030.5032.5034.5036.5038.5040.5042.5044.5046.5048.5050.5052.5054.5056.5058.5060.5062.5064.5066.5068.5070.5072.5074.5076.5078.5080.50

4”2.674.676.678.67

10.6712.6714.6716.6718.6720.6722.6724.6726.6728.6730.6732.6734.6736.6738.6740.6742.6744.6746.6748.6750.6752.6754.6756.6758.6760.6762.6764.6766.6768.6770.6772.6774.6776.6778.6780.67

5”2.834.836.838.83

10.8312.8314.8316.8318.8320.8322.8324.8326.8328.8330.8332.8334.8336.8338.8340.8342.8344.8346.8348.8350.8352.8354.8356.8358.8360.8362.8364.8366.8368.8370.8372.8374.8376.8378.8380.83

6”3.005.007.009.00

11.0013.0015.0017.0019.0021.0023.0025.0027.0029.0031.0033.0035.0037.0039.0041.0043.0045.0047.0049.0051.0053.0055.0057.0059.0061.0063.0065.0067.0069.0071.0073.0075.0077.0079.0081.00

7”3.175.177.179.17

11.1713.1715.1717.1719.1721.1723.1725.1727.1729.1731.1733.1735.1737.1739.1741.1743.1745.1747.1749.1751.1753.1755.1757.1759.1761.1763.1765.1767.1769.1771.1773.1775.1777.1779.1781.17

8”3.335.337.339.33

11.3313.3315.3317.3319.3321.3323.3325.3327.3329.3331.3333.3335.3337.3339.3341.3343.3345.3347.3349.3351.3353.3355.3357.3359.3361.3363.3365.3367.3369.3371.3373.3375.3377.3379.3381.33

9”3.505.507.509.50

11.5013.5015.5017.5019.5021.5023.5025.5027.5029.5031.5033.5035.5037.5039.5041.5043.5045.5047.5049.5051.5053.5055.5057.5059.5061.5063.5065.5067.5069.5071.5073.5075.5077.5079.5081.50

10”3.675.677.679.67

11.6713.6715.6717.6719.6721.6723.6725.6727.6729.6731.6733.6735.6737.6739.6741.6743.6745.6747.6749.6751.6753.6755.6757.6759.6761.6763.6765.6767.6769.6771.6773.6775.6777.6779.6781.67

11”3.835.837.839.83

11.8313.8315.8317.8319.8321.8323.8325.8327.8329.8331.8333.8335.8337.8339.8341.8343.8345.8347.8349.8351.8353.8355.8357.8359.8361.8363.8365.8367.8369.8371.8373.8375.8377.8379.8381.83

Revised 2011

16.0

13 3/8”

18”

13 3/8”

18”

Number of Square Feet Per Panel

FEET123456789

10111213141516171819202122232425262728293031323334353637383940

0”1.503.004.506.007.509.00

10.5012.0013.5015.0016.5018.0019.5021.0022.5024.0025.5027.0028.5030.0031.5033.0034.5036.0037.5039.0040.5042.0043.5045.0046.5048.0049.5051.0052.5054.0055.5057.0058.5060.00

1”1.633.134.636.137.639.13

10.6312.1313.6315.1316.6318.1319.6321.1322.6324.1325.6327.1328.6330.1331.6333.1334.6336.1337.6339.1340.6342.1343.6345.1346.6348.1349.6351.1352.6354.1355.6357.1358.6360.13

2”1.753.254.756.257.759.25

10.7512.2513.7515.2516.7518.2519.7521.2522.7524.2525.7527.2528.7530.2531.7533.2534.7536.2537.7539.2540.7542.2543.7545.2546.7548.2549.7551.2552.7554.2555.7557.2558.7560.25

3”1.883.384.886.387.889.38

10.8812.3813.8815.3816.8818.3819.8821.3822.8824.3825.8827.3828.8830.3831.8833.3834.8836.3837.8839.3840.8842.3843.8845.3846.8848.3849.8851.3852.8854.3855.8857.3858.8860.38

4”2.003.505.006.508.009.50

11.0012.5014.0015.5017.0018.5020.0021.5023.0024.5026.0027.5029.0030.5032.0033.5035.0036.5038.0039.5041.0042.5044.0045.5047.0048.5050.0051.5053.0054.5056.0057.5059.0060.50

5”2.133.635.136.508.139.63

11.1312.6314.1315.6317.1318.6320.1321.6323.1324.6326.1327.6329.1330.6332.1333.6335.1336.6338.1339.6341.1342.6344.1345.6347.1348.6350.1351.6353.1354.6356.1357.6359.1360.63

6”2.253.755.256.638.259.75

11.2512.7514.2515.7517.2518.7520.2521.7523.2524.7526.2527.7529.2530.7532.2533.7535.2536.7538.2539.7541.2542.7544.2545.7547.2548.7550.2551.7553.2554.7556.2557.7559.2560.75

7”2.383.885..386.758.389.88

11.3812.8816.3815.8817.3818.8820.3821.8823.3824.8826.3827.8829.3830.8832.3833.8835.3836.8838.3839.8841.3842.8844.3845.8847.3848.8850.3851.8853.3854.8856.3857.8859.3860.88

8”2.504.005.506.888.50

10.0011.5013.0014.5016.0017.5019.0020.5022.0023.5025.0026.5028.0029.5031.0032.5034.0035.5037.0038.5040.0041.5043.0044.5046.0047.5049.0050.5052.0053.5055.0056.5058.0059.5061.00

9”2.634.135.637.138.63

10.1311.6313.1314.6316.1317.6319.1320.6322.1323.6325.1326.6328.1329.6331.1332.6334.1335.6337.1338.6340.1341.6343.1344.6346.1347.6349.1350.6352.1353.6355.1356.6358.1359.6361.13

10”2.754.255.757.258.75

10.2511.7513.2514.7516.2517.7519.2520.7522.2523.7525.2526.7528.2529.7531.2532.7534.2535.7537.2538.7540.2541.7543.2544.7546.2547.7549.2550.7552.2553.7555.2556.7558.2559.7561.25

11”2.884.385.887.388.88

10.3811.88

13..3814.8816.3817.8819.3820.8822.3823.8825.3826.8828.3829.8831.3832.8834.3835.8837.3838.8840.3841.8843.3844.8846.3847.8849.3850.8852.3853.8855.3856.8858.3859.8861.38

Revised 2011

17.0

PRODUCTS

PART # SSR SYSTEM HEIGHTWEIGHT

EACHITEMCL200 Central-LocTM 3 3/8” .13 lbs.CLIP- LOW FIXED

CL204 Central-LocTM 4 3/8” .24 lbs.CLIP- HIGH FIXED

Clip fasteners must be ordered separately.


CL208* Central-LocTM 3” .12 lbs.CLIP- UTILITY


*Longer lead times may apply. Check with your salesperson for more information.Revised 2011

CLIP - 2” LOW SLIDING CL2102CSP2122*

Central-LocTM

Central Seam PlusTM

3 3/8”3 3/8”

.56 lbs.

.56 lbs.

1 1/4” movement in each directionSpecify SSR System.

Clip fasteners must be ordered separately.Central-LocTM Central Seam PlusTM

CL2104CSP2124

Central-LocTM

Central Seam PlusTM

4 3/8”4 3/8”

.68 lbs.

.68 lbs.

1 1/4” movement in each directionSpecify SSR System.

Clip fasteners must be ordered separately.Central-LocTM Central Seam PlusTM

CLIP - 2” HIGH SLIDING

CSP2126

CSP2128*

Central Seam PlusTM

Central Seam PlusTM

3 3/8”

4 3/8”

.55 lbs.

.68 lbs.

CLIP- 4” SLIDING

2” movement in each direction Clip fasteners must be ordered separately.

CSP2129 Central Seam PlusTM

5” .30 lbs.

1 1/4” movement in each direction.Clip fasteners must be ordered separately.

LOW HIGH

For applications that do not require 3/8” clearance provided by the low and high clips.

For use over solid substrate only.

CLIP - 2” STANDOFF, SLIDING

18.0

PRODUCTS

1 1/2”

1 1/2”1”

3/8”

PART # SIZE GAUGE LENGTH FINISHWEIGHT

EACHITEMEAVE PLATE - LOW CL7600 1 1/2”x

3/8”x1 1/2”14 8’0” Red Oxide 7.20 lbs.

Use on all SSR Systems. Optional - Use with Low Clips.


2 1/4”

2 1/4”1 1/2”

1”

EAVE PLATE - HIGH CL76162 1/4”x 1”x2 1/4”

14 8’0” Red Oxide 7.75 lbs.

Use on all SSR Systems. Mandatory - Use with High Clips.

1 15/16”

4”1”

3/8”

FLOATING EAVEPLATE - LOW

CL7617 1 5/16”x3/8”x 4”

14 8’0” Red Oxide 13.65 lbs.

Use on all SSR Systems.Use at eave when attaching panels to substructure at mid-point.

Use with 8 x 5 x 5 Eave Strut.

2 7/16”

4”1 1/2”

1”

FLOATING EAVEPLATE - HIGH

CL7618 2 7/16”x1”x 4”

14 8’0” Red Oxide 15.62 lbs.



4 1/16”

1 7/8”1”

3/8”

MID-SLOPE FIXEDPLATE - LOW

CL2995*

CL7630*

CL7631*

4 1/16”x3/8”x 1 7/8”

4 1/16”x3/8”x 1 7/8”

4 1/16”x3/8”x 1 7/8”

14

14

14

8’0”

10’0”

20’0”

Red Oxide

Red Oxide

Red Oxide

5.76 lbs.

7.20 lbs.

14.40 lbs.

Use on all SSR Systems.Use at mid-point endlap when attaching panels to substructure at mid-point.

4 1/16”

1 3/4”2 1/8”

1 3/8”

MID-SLOPE FIXED PLATE - HIGH

CL7636*

CL7634*

CL7635*

4 1/16”x1 3/8”x 1 3/4”

4 1/16”x1 3/8”x 1 3/4”

4 1/16”x1 3/8”x 1 3/4”

14

14

14

6’0”

10’0”

20’0”

Red Oxide

Red Oxide

Red Oxide

11.72 lbs.

8.40 lbs.

16.80 lbs.

Use on all SSR Systems.Use at mid-point endlap when attaching panels to substructure at mid-point.

19.0

PRODUCTSPART # SIZE GAUGE LENGTH FINISH

WEIGHTEACHITEM

*Longer lead times may apply. Check with your salesperson for more information.

Revised 2011

3/8

1/165

FLOATING EAVEPLATE -HIGH

CL7655* 2 1/8”x1 3/8”x 4”

14 8’0” Red Oxide 15.62 lbs.

Use on all SSR Systems.Use at high side of roof curb to provide floating support.

1 7/8”

6 1/16”1”

3/8”

4” FLOATINGEAVE PLATE - LOW

CL7628* 1 7/8”x3/8”x 6 1/16”

14 8’0” Red Oxide 7.20 lbs.



6 1/16”

2 3/8”

1 1/2”

1”

4” FLOATINGEAVE PLATE - HIGH

CL7629* 2 3/8”x1”x 6 1/16”

14 8’0” Red Oxide 11.20 lbs.



RAKE SUPPORT- LOW CL7710 3 3/8”x 2 1/2”

14 20’0” Red Oxide 31.00 lbs.

Use on all SSR Systems.Use with Low Clips.

RAKE SUPPORT- HIGH CL7720 4 3/8”x 1 1/2”

14 20’0” Red Oxide 31.00 lbs.

Use on all SSR Systems.Use with High Clips.

RAKE SUPPORT- UTILITY

CL7722* 3”x2 7/8” 14 20’0” Red Oxide 31.00 lbs.

Use with Central-Loc™ system.Use with Utility Clips.

20.0

PRODUCTSPART # SIZE GAUGE LENGTH FINISH

WEIGHTEACHITEM


1/8”

BACK UP PLATE- MODIFIED

CL7760*CL7742*

24”18”

1616

Red OxideRed Oxide

3.01 lbs.3.00 lbs.

Use on all SSR Systems.UL90 rated over solid substrate.

Open framing voids UL90 rating.Cross Section

OUTSIDE CLOSURE CL430(color)

CL432(color)

24”

18”

2424*24*

2424*24*

GalvalumeCentralGuardTM

Kynar 500®/Hylar 5000®

GalvalumeCentralGuardTM

Kynar 500®/Hylar 5000®

.81 lbs.

.81 lbs.

.81 lbs.

.65 lbs.

.65 lbs.

.65 lbs.

Painted closures will have longer lead times.

Trapezoid Leg

10”

GUTTER STRAP CL246 N/A 10” 2 1/4” N/A .30 lbs.

18 gauge material. Longer lead times may apply.Contact sales representative for more information.

Use with SS-240A/B/F, SS-241A/B/F, SS-247A/B/H or SS-248A/B/H Sculptured Gutter. Use with SS-730A/B, SS-732A/B, SS-752A/B or SS-754A/B Style Gutter.

ITEM PART #DIM.“A” LENGTH GIRTH

ROOF SLOPE

WEIGHT EACH

METAL INSIDECLOSURE

CL426 3/4” 18 Galvalume .22 lbs.PART # SIZE GAUGE FINISH

WEIGHTEACHITEM

TAPE SEALER

PART # TYPE WIDTHTHICK-

NESS LENGTHCARTON

QTYCARTONWEIGHTITEM

CL502A

CL504A

Triple Bead

Tri-Bead

2 1/2”

7/8”

3/16”

3/16”

20’

25’

6 rolls

8 rolls

23.0 lbs.

20.0 lbs.

Tape sealer sold by carton only.

Double Bead

Triple Bead

Tri-Bead

21.0

PRODUCTS

3/8”, 5/8” or 1”

3”LENGTH

THERMAL SPACERITEM PART # WIDTH

THICK-NESS LENGTH MATERIAL

WEIGHTEACH

CL575CL576CL577

3”3”3”

1”5/8”3/8”

23 7/8”23 7/8”23 7/8”

PolystyrenePolystyrenePolystyrene

.08 lbs.

.07 lbs.

.06 lbs.

Specify SSR system.

TUBE SEALANT

ITEM PART # TYPE COLORTUBESIZE

CARTONSIZE

TUBEWEIGHT

GEOCGEOGGEOW

TripolymerTripolymerTripolymer

ClearGrayWhite

10.3 oz.10.3 oz.10.3 oz.

242424

.85 lbs.

.85 lbs.

.85 lbs.

25’ per tube at 1/4” bead.


WIND CLAMP

ITEM PART # SSR SYSTEM MATERIALWEIGHT

EACHCL568*CL569*

Central-LocTM Central Seam PlusTM

AluminumAluminum

.10 lbs

.10 lbs

Use at SSR clip locations to provide additional panel uplift capacity. Clamp usage to be determined by a registered professional engineer.

SPACER TOOLITEM PART #

SSRSYSTEM LENGTH MATERIAL

WEIGHTEACH

CL619 Central-LocTM 26” Aluminum 1.28 lbs.

TAPE SEALER CL512A Minor Rib 1 3/8” 7/32” 4” 144 pcs. 10.0 lbs.

Use to fill voids at the minor ribs of panel for eave and valley conditions.Tape sealer sold by carton only.

PART # TYPE WIDTHTHICK-

NESS LENGTHCARTON

QTYCARTONWEIGHTITEM

FASTENER #2A 2AFASTENER 5/16” Long Life AB 1,500 38.25 lbs.

17 x 1” Long life AB5/16” Hex Washer Head w/ Sealing Washer

22.0

PRODUCTS

FASTENER #1ITEM PART #

HEADSIZE TYPE

CARTON SIZE

CARTON WEIGHT

1FASTENER 5/16” Driller 2,000 34.40 lbs.

Clip to purlin with up to 4” insulation thicknessEave plate to eave strut

Inside closure to eave plate or eave strutRake support to purlin (Fixed System Only)

Add $25 paint set-up charge.1/4” - 14 x 1” Driller

5/16” Hex Washer Head w/ 5/8” O.D. Washer

FASTENER #1E 1EFASTENER 5/16” Long Life Driller 2,000 45.40 lbs.

1/4” - 14 x 1 1/4” Long life driller5/16” Hex Washer Head w/ Sealing Washer

FASTENER #1F 1FFASTENER 5/16” Driller 2,000 39.20 lbs.

1/4” - 14 x 1 1/2” Driller5/16” Hex Head w/ 5/8” O.D. Washer


ALL FASTENERS SOLD IN QUANTITIES OF 250UNLESS OTHERWISE SPECIFIED.

Panel to eave plate or eave strutRake trim to roof panel

Outslide ClosureEndlap

Add $25 paint set-up charge.

Clip to purlin with over 4” insulation thicknessAdd $25 paint set-up charge.

Use in place of fasteners #1E and #4 at all strip-outsAdd $25 paint set-up charge.

ITEM PART #SSR

SYSTEM GAUGE FINISHWEIGHTPER 100

3 7/8” 5”

BEARING PLATE CL7500 BOTH N/A Red Oxide .32 lbs.

For use over rigid board insulation.Use with all clips.

Longer lead times may apply. Contact sales representative for more information.

FASTENER #2B 2BFASTENER* 5/16” Long Life AB 2,000 43.0 lbs.

1/4” - 14 x 1” Long life driller5/16” Hex Washer Head w/ Sealing Washer Add $25 paint set-up charge.

FASTENER #4 4FASTENER* 5/16” Long LifeLap TEK

2,000 38.40 lbs.

1/4” - 14 x 7/8” Long life lap TEK 5/16” Hex Washer Head w/ Sealing Washer

Ridge and other flashing to outside closureGutter to panelGutter to strap

Trim to trim connectionsAdd $25 paint set-up charge.

23.0

PRODUCTSITEM PART #

HEADSIZE TYPE

CARTON SIZE

CARTON WEIGHT

FASTENER #5 5FASTENER* 5/16” Shoulder TEK 2,000 35.0 lbs.

1/4” - 14 x 1 1/4” Shoulder TEK5/16” Hex Washer Head

FASTENER #6 6FASTENER* 5/16” TEK 4.5 2,500 41.25 lbs.

Clip to bar joistEave plate to beam

Add $25 paint set-up charge.12 - 24 x 1 1/4” TEK 4.5

5/16” Hex Head w/ O.D. Washer

FASTENER #8 8FASTENER* 1/4” Woodgrip 2,500 26.75 lbs.

10 x 1 1/2” Woodgrip1/4” Hex Washer Head w/ 1/2” O.D. Washer

FASTENER #7 7FASTENER* 5/16” Shoulder TEK 2,000 36.60 lbs.

1/4” - 20 x 1 1/4” Shoulder TEK 45/16” Hex Washer Head


Special application fastenerFor use on 2x4 lath and other solid wood deck (Not for use in plywood)



FASTENER #9 9FASTENER* 5/16” Long LifeWoodgrip

2,000 36.60 lbs.

10 x 1 1/2” Long life woodgrip5/16” Hex Washer Head w/ Sealing Washer

Special application fastenerFor use on 2x4 lath and other solid wood deck (Not for use in plywood)


FASTENER #10 10FASTENER* 3/8” B 2,500 42.50 lbs.

1/4” - 14 x 1” Type B3/8” Hex Washer Head w/ 5/8” O.D. Washer

Special application fastenerFor use on structural steel up to 1/2” thick

Requires pre-drilled holeAdd $25 paint set-up charge.

FASTENER #11 11FASTENER N/A Nail Drive 500 11.50 lbs.

1/4” x 1 1/4”Nail Drive Masonry Anchor

Special application fastenerfor use on masonry

Rake support to purlinFloating eave plate to eave strut


Rake support to bar joistFloating eave plate to bar joist

FASTENER #12 12FASTENER 2/2 Quadrex Driller 5,000 34.50 lbs.

Support plate to purlins at valley and hip conditionsRake angle to purlins

24.0

PRODUCTSITEM PART #

HEADSIZE TYPE

CARTON SIZE

CARTON WEIGHT

FASTENER #14 14FASTENER Stainless Steel 5,000 15.0 lbs.

1/8” x 0.337: Pop Rivet

FASTENER #14A 14AFASTENER Stainless Steel 5,000 16.0 lbs.

1/8” x 0.525” Pop Rivet

Gutter strap to snow gutterAdd $25 paint set-up charge.


Snow gutter to eave plateOutside closure to back-up angle at hip condition


FASTENER #209 209FASTENER* #3 Phillips Driller 1,000 18.60 lbs.

18 gauge maximum drilling thickness.14 x 2” Deck Screw

#3 Phillips Truss Head

FASTENER #210 210FASTENER* 5/16” Long Life 2,500 44.75 lbs.

14 x 3” Deck Screw#3 Phillips Truss Head 18 gauge maximum drilling thickness.


FASTENER #211 211FASTENER* #3 Phillips Driller 1,000 29.30 lbs.

14 x 4” Deck Screw#3 Phillips Truss Head 18 gauge maximum drilling thickness.

FASTENER #18 18FASTENER* 5/16” A 2,500 39.25 lbs.

Add $25 paint set-up charge.14 x 1” Type A

5/16” Hex Washer Head w/ 5/8” O.D. Washer

FASTENER #15D 15DFASTENER* #3 Phillips Driller 1,000 46.10 lbs.

14 x 6” Deck Screw#3 Phillips Truss Head

25.0

PRODUCTSITEM PART #

HEADSIZE TYPE

CARTON SIZE

CARTON WEIGHT



FASTENER #46 46FASTENER* 5/16” B 2,500 60.0 lbs.

1/4” - 14 x 5/8” Long life Type B5/16” Hex Washer Head w/ Sealing Washer

Special application fastenerEndlap over solid deck or rigid insulation

Use with pre-punched only Use on all SSR Systems with endlaps over solid substrate.


ROOF SLOPE

2 1/2”

“A”

1 1/4”120

120

painted side

RIDGE FLASHING - FLOATING

SS200(color)SS202(color)SS213(color)SS214(color)

3 1/2”4 1/2”6 1/2”7 1/2”

10’2”10’2”10’2”10’2”

15 1/2”17 1/2”21 1/2”23 1/2”

1/4-2 1/2:122 9/16-4:121/4-2 1/2:122 9/16-4:12

Specify roof slope. Use without ventilator - 24” peak purlin spacing.

All trims available in 26 gauge only.

“A”

RIDGE END CAP SS201(color)SS203(color)SS896(color)SS897(color)

3 1/2”4 1/2”6 1/2”7 1/2”

SS200SS202SS213SS214

Specify roof slope.

ITEM PART #DIM.“A” USE WITH


ROOF SLOPE

102

4 3/4”

5 1/2”

4 3/4”

1”

1”1/2”

DIM“A”painted

side

156

90 - ofRoof Slope

90

90 + ofRoof Slope

102

SCULPTURED GUTTER SS240A(color)SS240B(color)SS241A(color)SS241B(color)

6 5/16”6 15/16”6 5/16”6 15/16”

10’2” 10’2” 20’4”20’4”

23 13/16”24 7/16”23 13/16”24 7/16”

1/4-4:124 1/16-6:12

1/4-4:124 1/16-6:12

Specify roof slope.Use in installations where eave plates are not used.

26.0

PRODUCTSITEM PART #

DIM.“A” LENGTH GIRTH

ROOF SLOPE


SCULPTUREDGUTTER ENDS

Left and Right

Use with all sculptured or styled gutters. End caps will be made to fit gutter ordered. Specify left or right. Specify gutter part number.

2 1/2”4 3/4”

1 5/8”

2”1/2”

1 3/4”5/8”PaintedSide

102

102

90

90 - ofRoof Slope

135

156

SCULPTUREDEAVE TRIM

SS250(color)SS251(color)

N/AN/A

10’2”20’4”

14 1/4”14 1/4”

N/AN/A

Specify roof slope.Specify open hem when using with SS338 Continuous Cleat.

“A”

4 3/4”

5 1/2”

1 3/4”

5/8”

PaintedSide

102

102

90 - ofRoof Slope

135

156

4 3/4”

SCULPTURED HIGHSIDE EAVE TRIM

SS265(color)SS265B(color)SS266(color)SS266B(color)

2”3 11/16”

2”3 11/16”

10’2”10’2”20’4”20’4”

20 3/8”22 1/16”20 3/8”22 1/16”

1/4-1 3/4:121 3/4-4:12

1/4-1 3/4:121 3/4-4:12

Specify roof slope.

ALL TRIMS AVAILABLE IN 26 GAUGE ONLY.

SS245(color) N/A N/A N/A N/A

4 3/4”

4 3/4”

3 5/8”

3/4”

1 3/4”

5/8”

2”135

156

90

90102

paintedside

SCULPTUREDRAKE TRIM


N/AN/A

10’2” 20’4”

19 1/4”19 1/4”

N/AN/A

27.0

PRODUCTSITEM PART #


ROOFSLOPE

Revised 2011

9”

3/4” 90

paintedside

VARIABLETERMINATION

SS117(color) N/A 10’2” 10 1/4” N/A

3 1/2”

4”

specifypitch

paintedside

1/2”

BOX PANELCAP TRIM

SS272(color) N/A 10’2” 8” N/A

3/4”

3/4” 1”

45

90

paintedside

RAKE SLIDE SS115(color) N/A 10’2” 2 3/4” N/A

2 1/2”

2”

specifypitch

paintedside

1/2”

1 3/8”

1 1/8”95

OFFSET PANELCAP TRIM

SS271(color) N/A 10’2” 7 1/2” N/A


1”

3”

1”

paintedside

ZEE CLOSURE SS360 3” 10’2” 5” N/A

4 3/4”

A”1 1/4”

2 1/2”

paintedside

PARAPET HIGH SIDE EAVE FLASH - FLOATING

SS275SS274

3.5”4.5”

10’2”10’2”

12.5”13.5”

N/AN/A

Use at hips. 24 gauge material.

Specify roof slope.

Use with floating SSR.

Use with PBR panels.

28.0

PRODUCTSITEM PART #


ROOF SLOPE

2 1/2”

1/2”

135

CONTINUOUS CLEAT SS338(color) N/A 10’2” 3” N/A

Revised 2011

FIXED PEAK BOX SS120(color)SS121(color)

N/AN/A

1’6”2’6”

21”21”

1/2-6:121/2-3 3/4:12

FLOATING PEAK BOX SS125(color)SS126(color)

N/AN/A

2’1”2’6”

33 1/2”37 1/4”

1/4-6:121/4-6:12

COUNTERFLASH SS341(color) N/A 10’2” 4 1/2” N/A

ALTERNATECOUNTERFLASH

SS343(color) N/A 10’2” 4 1/2” N/A

Specify roof slope.Use with Central-Loc™ roof system.

Use with SS110 or SS111 sculptured rake trim.

Specify roof slope. Use on all SSR Systems. Check with sales representative for lead times. Kit includes cinch anglesand flexible membrane. Use with SS110 or SS111 sculptured rake trim.


REPAIR CAP CL1210 N/A 10’3” N/A N/A

Made from .060” extruded aluminum.Use with Central Seam Plus™ roof system.

Longer lead times may apply depending on color. Contact sales representative for more information.

29.0

PRODUCTSITEM PART #


ROOF SLOPE

Revised 2011

PARAPET RAKECLEAT

SS290(color) 3/4” 10’2” 2 1/4” N/A

STANDARD LOW VALLEYLow/Utility System


N/AN/A

10’2”20’4”

38”38”

N/AN/A

PARAPET RAKEFLASH

SS285(color)SS286(color)SS287(color)

3”5”7”

10’2”10’2”10’2”

8”10”12”

N/AN/AN/A

STANDARD HIGH VALLEYHigh System

SS712(color) N/A 10’2” 41 1/2” N/A

Use with all SSR Systems.

Use with all SSR Systems. Specify roof slope or angle indicated in drawing.

Use with all SSR Systems.Specify roof slope or angle indicated in drawing.


SCULPTUREDRAKE END

SS134(color) N/A N/A N/A N/A

Use with all SSR Systems.Use with SS110 Scuptured Rake Trim.

Specify left or right.

OUTSIDE CORNER BOX SS230(color) N/A 18” 16” N/A

Specify roof slope.

GALVALUME 20 YEAR WARRANTYCentral States Manufacturing (CSM) warrants that hot-dipped aluminum-zinc alloy coated Galvalume steel sheets sold as Panel-Loc, Panel-Loc Plus, M-Loc, Horizon-Loc, R-Loc, Central-Loc or Central Seam Plus, for use as steel building roofing and siding panels, if erected in the United States, WILL NOT rupture, fail structurally or perforate within a period of twenty (20) years after shipment due to exposure to normal atmospheric corrosion.

This warranty DOES NOT APPLY to sheets exposed at any time to corrosive or aggressive atmospheric conditions, including but not limited to: • Areas subject to salt water marine atmospheres or to constant spraying of either salt or fresh water. • Areas subject to fallout or exposure to corrosive chemicals, ash or fumes. • Areas subject to water run-off from lead or copper flashings or areas in metallic contact with lead or copper. • Conditions/circumstances where corrosive fumes or condensates are generated or released inside the building.

This warranty DOES NOT APPLY in the event of: • Mechanical, chemical or other damage sustained during shipment, storage, erection, or after erection. • Failure to provide free drainage of water, including internal condensation from overlaps and all other surfaces of the sheets or panels. • Failure to remove debris from overlaps and all other surfaces of the sheets or panels. • Damage caused to the metallic coating by improper scouring or cleaning procedures. • Deterioration of the panels caused by contact with green or wet lumber, or storage stain caused by water damage or condensation. • Presence of damp insulation or other corrosive materials in contact with or close proximity to the panel. • Deterioration to the panels caused directly or indirectly by panel contact with concrete, asphalt, gravel, dirt, mulch, or any corrosive material. • Deterioration of the panels caused directly or indirectly by panel contact with fasteners. Selection of suitable long-lasting fasteners to be used with Galvalume roofing and siding panels rests solely with the Buyer. • A degree of bending less than 2T for sheet gauges up to 0.030 in. and degree of bending less than 4T for sheet gauges 0.031 in. and thicker. • Slopes of roof or sections of the roof flatter than 1/4:12.

This warranty shall be subject to the stipulations, limitations and conditions hereinafter set forth.

The remedy for any claims on steel roofing and siding panels shall be at the discretion of Central States Manufacturingand shall be limited to refinishing or replacing thedefective panels.

CENTRAL STATES MANUFACTURING SHALL NOT BE LIABLE FOR ANY LOSSES, DAMAGES OR EXPENSES WHETHER DIRECT, INCIDENTAL OR CONSEQUENTIAL, CAUSED BY OR RESULTING FROM THE USE OFDEFECTIVE OR NON-CONFORMING STEEL ROOFINGAND SIDING PANELS OR FOR ANY OTHER INCIDENTAL

OR CONSEQUENTIAL DAMAGES. CENTRAL STATES MANUFACTURING’S TOTAL LIABILITY IS EXPRESSLY LIMITED TO THE PURCHASE PRICE OF THE STEEL ROOFING AND SIDING PANELS.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation or exclusion may not apply in your state. This warranty provides specific legal rights and other rights which vary from state to state that may apply.

Central States Manufacturing’s liability for breach of this warranty shall be limited exclusively to the cost of either repairing non-conforming, rupturing, perforating or structurally failing panels, or at CSM’s sole option, of furnishing FOB Buyer’s plant sufficient sheet product to enable Buyer to fabricate replacement panels for the non-conforming, rupturing, perforating or structurally failing panels. CSM shall not in any event be liable for the costof labor expended by others on any non-conforming, rupturing, perforating or structurally failing sheet or forany special, indirect, or consequential loss of profits or any other incidental, general, special or compensatory damagesto anyone by reason of the fact that such panels shallhave been non-conforming, rupturing, perforating, or structurally failing.

Claims under this warranty must be made in writing to Central States Manufacturing at the address set forth below within 30 days after discovery of the defect. CSM shall have an additional 30 days to inspect the steel roofing and siding panels before any further action shall be taken. Adequate identification of material involved in the claim, including date of installation, order number, invoice number and date of shipment must be established by the Buyer.

Buyer shall exercise diligence in inspection of sheets as received from CSM so as to mitigate repair or replacement. CSM extends this warranty solely to the original owner of any structure where the material is installed. This warranty is not transferable and non-assignable. CSM reserves the right to terminate this warranty at any time (except as to orders already accepted) upon the giving of written notice thereof.

The Law of the State of Arkansas shall govern the rights and duties of the parties under this agreement and jurisdiction and venue is fixed in Benton County, Arkansas.

CENTRAL STATES MANUFACTURING MAKES NO GUARANTEES, EITHER EXPRESSED OR IMPLIED BEYOND THE FACE HEREOF, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF FITNESS AND MERCHANTABILITY, AND SHALL HAVE NO OTHER LIABILITY WITH RESPECT THERETO.

302 Jane PlaceLowell, Arkansas 72745

2051 Tryon RoadMichigan City, Indiana 46360

660 Grigsby WayCedar Hill, Texas 75104

3402 Industrial DriveJasper, Alabama 35501

751 Piedmont Triad West DriveMount Airy, North Carolina 27030

30.0

PRIME 40 YEAR LIMITED WARRANTYFOR CENTRAL STATES MANUFACTURING (CSM) PANEL-LOC, PANEL-LOC PLUS, R-LOC, HORIZON-LOC, M-LOC, CENTRAL-LOC AND CENTRAL SEAM PLUS STEEL ROOFING AND SIDING PANELS. THIS WARRANTY COVERS PRIME MATERIAL ONLY. THRIFTY MATERIAL IS COVERED BY A SEPARATE WARRANTY.

CSM warrants that the color-coated finish applied to its steel roofing and siding panels will not, within a period of forty years after installation or forty years and one month after the date of shipment (whichever comes first), crack, check, peel or lose adhesion. This does NOT include minute fracturing, which may occur in proper fabrication of the building parts. Failure due to substrate corrosion is excluded.

CSM also warrants that the color-coated finish applied to its steel roofing and siding panels will not, within a period of thirty years after installation or a period of thirty years and one month after the date of shipment (whichever comes first), chalk or lose color according to the following grids. Additionally, chalk ratings are measured in accordance with the standard procedures specified in ASTM-D-4214-98 method D659. Color (fade) ratings are measured in accordance with the standard procedures specified in ASTM-D-2244-02. Color change shall be measured on an exposed painted surface that has been cleaned of surface soils and chalk, and the corresponding values measured on the original or unexposed painted surface. It is understood that fading or color changes may not be uniform if the surfaces are not equally exposed to the sun and elements.

(Exception: Gallery Blue - Sidewall: Color: 8/Chalk: 6, Roof: Color: 10/Chalk: 5)1) DISCLAIMER OF WARRANTY. THE EXPRESS WARRANTY STATED HEREIN IS THE EXCLUSIVE WARRANTY APPLICABLE TO CSM PANEL-LOC, PANEL-LOC PLUS, R-LOC, HORIZON-LOC, M-LOC, CENTRAL-LOC AND CENTRAL SEAM PLUS PRIME PAINTED MATERIAL ONLY, ROOFING AND SIDING PANELS. CSM MAKES NO WARRANTIES OR GUARANTEES, EITHER EXPRESSED OR IMPLIED, BEYOND THE FACE HEREOF INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. CSM SHALL HAVE NO OTHER LIABILITY WITH RESPECT THERETO. This warranty will apply to those panels refinished or replaced but only for the period of time left on the original warranty. No employee or representative of CSM is authorized to change this limited warranty in any way or grant any other warranty regarding the product.

2) LIMITATION OF LIABILITY. THE EXCLUSIVE REMEDY FOR ANY AND ALL CLAIMS ARISING FROM THIS LIMITED WARRANTY SHALL BE LIMITED TO CSM REFINISHING OR REPLACING DEFECTIVE PANELS OR REFUNDING THE PURCHASE PRICE OF SUCH PANELS AS CSM SHALL ELECT. CSM SHALL NOT BE LIABLE FOR ANY LOSSES, DAMAGES, OR EXPENSES, WHETHER DIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES. IF OUR CENTRALGUARD™ SILICONIZED POLYESTER COATINGS FAIL TO COMPLY WITH OUR LIMITED WARRANTY, WE WILL PAY FOR THE LABOR AND THE MATERIALS REASONABLY NECESSARY TO REPAINT, REPAIR OR REPLACE, AT OUR OPTION, THE BUILDING PART SHOWING THE FAILURE. CSM’S TOTALLIABILITY IS EXPRESSLY LIMITED TO THE PURCHASE PRICE OF THE CSM STEEL ROOFING AND SIDING PANELS.

3) Claims under this warranty must be made in writing to CSM at the address set forth below within 30 days after the discovery of the defect. The notice to CSM shall include adequate identification of the material involved, nature of the claimed defect, date of the installation, date of shipment and order number. Failure of the claimant to provide such information in the time provided shall be deemed as a waiver of the claimant’s rights herein. CSM shall have an additional 30 days to inspect the CSM steel roofing and siding panels before any further action shall be taken.4) CSM does not warrant or guarantee the interior or reversed side finish or prepainted materials used for interior application.5) CSM does not warrant or guarantee claims arising from damage to panels due to exposure to salt and salt water, water spray, corrosive or harmful chemicals (whether solids, liquids or gases), airborne contaminants, hail or other agents of a similar nature.6) CSM does not warrant or guarantee claims arising from the following:

a) Damage or defects caused by acts of God, falling objects, external forces, explosion, fire, riots, civil commotion, acts of war, excessive radiation, or other similar or dissimilar occurrences beyond CSM’s control.b) Minor hairline cracking of the paint finish.c) Defects or damages to the painted steel roofing and siding panels caused by handling, shipping, transit, processing, storage or installation; damage due to failure of the substrate.d) Damage caused by moisture or other contamination prior to installation.e) Steel shavings or minute iron particles from sawing sparks that come in contact with the painted surface.f) Non-vertical panels that don’t have an adequate degree of pitch so as not to allow any free standing or accumulation of standing water.g) Stored or installed in a way that allows for contact with animals or animal waste.h) Deterioration to the panels caused directly or indirectly by panel contact with fasteners. The selection of suitable fasteners rests solely with the buyer.i) Weather uniformity under non-uniform conditions.j) Unusual harmful fumes, chemically aggressive environment, foreign substances in the atmosphere, standing water or direct salt spray.k) Damage due to green, wet or treated lumber.

7) The warranty applies to panels installed in the continental United States, Alaska, and Canada.8) CSM extends this warranty solely to the buyer. This warranty is not transferable and non-assignable. Further, it is applicable only to the original owner of any structure where the material is installed.

Effective April 1, 2006.

Sidewall RoofColor Chalk

5 8

Color Chalk

6 7






31.0

32.0

SELECT 40 YEAR LIMITED WARRANTYLIMITED WARRANTY AND LIMITATION OF LIABILITY FOR CENTRAL STATES MANUFACTURING (CSM) PANEL-LOC, PANEL-LOC PLUS, R-LOC, HORIZON-LOC, M-LOC, CENTRAL-LOC AND CENTRAL SEAM PLUS STEEL ROOFING AND SIDING PANELS. THIS WARRANTY COVERS SELECT MATERIAL ONLY. PRIME AND THRIFTY MATERIAL ARE COVERED BY SEPARATE WARRANTIES.

CSM is pleased to present you with our 40-year Select limited warranty.

For forty (40) years from the date of installation, the color coated finish WILL NOT crack, check or peel (lose adhesion). This does not include minute fracturing, which may occur in proper fabrication of the building parts. Failureduetosubstratecorrosionisexcluded.

SIDEWALL PANELS (for thirty (30) years from installation or thirty and one half (30-1/2) years from coating application) a) WILL NOT chalk in excess of ASTM-D-4214-98 method A D659 number nine (9) rating. b) WILL NOT change color more than five (5.0) Hunter s E units as determined by ASTM method D-2244-02. Color change shall be measured on an exposed painted surface that has been cleaned of surface soils and chalk, and the corresponding values measured on the original or unexposed painted surface. It is understood that fading or color changes may not be uniform if the surfaces are not equally exposed to the sun and elements.

ROOFING PANELS (for thirty (30) years from installation or thirty and one half (30-1/2) years from coating application) a) WILL NOT chalk in excess of ASTM D-4214-98 method A D659 number eight (8) rating. b) WILL NOT change color more than six (6.0) Hunter s E units as determined by ASTM method D-2244-02. Color change shall be measured on an exposed painted surface that has been cleaned of surface soils and chalk, and the corresponding values measured on the original or unexposed painted surface. It is understood that fading or color changes may not be uniform if the surfaces are not equally exposed to the sun and elements.

In case of a complaint, you will provide access to us and assist us as necessary in determining the exact cause of the failure. ASTM and NCCA testing procedures will be used.

If our Select coatings fail to comply with our limited warranty, we will pay for the labor and material reasonably necessary to repaint, repair or replace, at our option, the building part showing the failure. In order for the warranty to be effective, however, you must notify us in writing of the failure within thirty (30) days of the discovery of such problem and provide any documentation we may require. If we repaint, we will use normal painting practices using the same paint system or other suitable alternatives. This warranty also applies to the part we repaint, repair, or replace, but only for the unexpired portion of the warranty period applicable to the original part.

Our LIMITED WARRANTY DOES NOT APPLY to circumstances which we do not control, including:

Acts of God, falling objects, explosions, fire or other such similar or dissimilar occurrences beyond CSM’s control; Unusual harmful fumes, foreign substances in the atmosphere, standing water, or salt spray; Improper treatment of or defects in the metal or in the fabrication; Stored or installed in a way that allows for poor air circulation; Stored or installed in a way that allows for contact with animals or animal waste; Mishandled Products, e.g., ANY PRODUCT THAT HAS BEEN ABUSED, ALTERED, MODIFIED, USED IN A MANNER NOT ORIGINALLY INTENDED, OR STORED CONTRARY TO OUR INSTRUCTIONS. Including a) damage to the product occasioned by condensation attributable to improper packaging, handling, shipping, processing and/or installation; b) damage due to failure of the substrate.

This warranty will apply only to metal which is coated with Fluropon and used on property located within the continental United States, Alaska, and Canada.

Some colors may not meet our high standards. The warranty applies only to colors that are on our approved color list. Metallics are not color measurable and are not applicable to section 1b.

For our warranty to apply, you must maintain certain records necessary to identify the Select panels involved in a complaint. You need to make them available to us for inspection and copying.

This is our only warranty concerning the Select products color coated finish. We have no other obligations concerning them. Please read and understand the following:

Except for this warranty, we make NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, WITH RESPECT TO OUR SELECT PRODUCTS COLOR COATED FINISH. IMPLIED WARRANTIES OR FITNESS AND MERCHANTABILITY ARE EXCLUDED. Further, we have no other liability with respect to our Select products color coated finish, whether based on warranty, negligence or any other legal theory. For example, we have no liability for consequential damages.

That is our complete warranty. It sets out all of our obligations regarding our Select product coil coatings. It is only for your benefit and is not assignable. Such things as your purchase order forms or our acceptance forms cannot change it, but it can be changed if CSM agrees in writing.






Central States Manufacturing Inc. will offer two levels of protection “ CLASSIC and ELITE” for weathertight warranties as outlined below.

CLASSIC· The CLASSIC warranty carries a 20-year term covering the panel, clips, and related hardware.

· The roofing contractor/installer will be responsible for the first 24 months after substantial completion of the roof.

· Construction drawings must be reviewed by the Commercial Sales Group in Lowell, AR prior to issuance

· A jobsite inspection is not mandatory but may be required based upon the drawing review. An on-site inspection will be an additional charge.

· A crew experienced in trapezoidal panel, or certified by MBCI or another entity, or trained by Central States must install the material.

· Material invoices must be paid in full before the warranty is issued

Cost of the CLASSIC warranty is as follows:

· Warranty cost is per square foot of coverage with a minimum charge. Please check with your sales representative. · Liability maximum for CSMI of 20 cents per square foot

ELITE· The ELITE warranty carries a 20-year term covering the panel, clips; related hardware and CSMI produced flash-ings. No other products will be covered unless approved by CSMI.

· The roofing contractor/installer will be responsible for the first 24 months after substantial completion of the roof.

· Construction drawings must be reviewed by the Commercial Sales Group in Lowell, AR prior to issuance

· A jobsite inspection is not mandatory but may be required based upon the drawing review. An on-site inspection will be an additional charge.

· A crew experienced in trapezoidal panel, or certified by MBCI or another entity, or trained by Central States must install the material.

· Material invoices must be paid in full before the warranty is issued

Cost of the ELITE warranty is as follows:

· Warranty cost is per square foot of coverage with a minimum charge. Please check with your sales representative. · Liability maximum for CSMI of 32 cents per square foot

WEATHERTIGHT WARRANTY GUIDELINES

33.0

General ConditionsAll materials used to produce the roof panels and flashing must carry a 20-year material and finish warranty from the coil and paint producer.

At CSMI’s discretion, a jobsite inspection may be performed before issuing the warranty, which will be a fee in addition to the cost of the warranty.

Any attempts to repair leaks with exterior sealing such as surface caulking or coating are only temporary in nature and offer no long-term solution. The use of these repair techniques will void the warranty.

ALL ROOF APPLICATIONS MUST MEET MANUFACTURER’S SPECIFICATIONS OR ACCEPTABLE INDUSTRY STANDARDS.

All invoices that pertain to the project and the warranty must be paid in full before issuance of a weathertight warranty.

WEATHERTIGHT WARRANTY GUIDELINES, CONT.

34.0

&hqwudo 6wdwhv 0dqxidfwxulqj -...

Documents