d:dataamdooramerican seriesdoor specification · 'rru 6shflilfdwlrq 3djh '225...
TRANSCRIPT
DOOR SPECIFICATIONS
ABS - Manufacturing888-454-2888 Phone888-454-2889 Fax
10/1/16Door Specification
Page 1
FLUSH HOLLOW CORE
Specifications: 3 & 5 Ply construction. Meets or exceeds industry standardsof WDMA I.S.1.
Lay Up Method LooseMaximum Sizes: Width - 4/0. Length depends on face (See faces below for
available length)Thickness: 1-3/8" and 1-3/4" ONLY
Stiles: MDF available on MDF type skins, Only 1-3/8" Thickness & 6/8 Length.Softwood available on all skin types 1-3/8" and 1-3/4" Thickness.Width = 1" Nominal, 13/16" Minimum after prefit size.
Rails: 1-3/8" Thickness = MDF, 1-5/8" Nominal, 1" Minimum after undercut1-3/4" Thickness = MDF, 2-1/4" Nominal, 1" Minimum after undercut
Core: Cellular Honeycomb with 5" Hexagonal cells.Lock Blocks: Double 3" x 20" Particleboard (28lb) as standard.
Faces: Lauan (Okoume) - Raw, 2 ply , 8/0 Max imum.RN Birch - Raw, 2 ply , 1/64" Face veneer thickness, 8/0 Maximum.PS Red Oak - Raw, 2 ply , 1/64" face veneer thickness, 8/0 Max imum.MDF - Primed and Raw, Single Ply , 10/0 Max imum.Embossed MDF - Primed and Prefinished, Single Ply , 8/0 Maximum.
Adhesive: Type-1 PVA, Interior installation only .Machining: To Specification
Lites: To specification. Blocking only upon request.Louvers: To specification. Blocking only upon request.
Acoustical Rating: N/AWarranty: Standard two year. See limited warranty for details.
*No warranty for Telegraphing*Description (FP-1-3/8) = 1-3/8" Thick, MDF Stiles
Abbreviations: (FJ-1-3/8) = 1-3/8" Thick, FJ Softwood Stiles(SWE-1-3/8) = 1-3/8" Thick, Clear Softwood Stiles(FJ-1-3/4) = 1-3/4" Thick, FJ Softwood Stiles(SWE-1-3/4) = 1-3/4" Thick, Clear Softwood Stiles
Recommended Residential and Light CommercialUse:
01
10/1/16Door Specification
Page 2
DOOR SPECIFICATIONS
ABS - Manufacturing888-454-2888 Phone888-454-2889 Fax
MOLDED PANEL HOLLOW CORESpecifications: 3 Ply construction. Meets or exceeds industry standards
of WDMA I.S.1.Lay Up Method Loose
Maximum Sizes: Width - 3/0Length - 8/0 *Certain sty les only*
Thickness: 1-3/8" and 1-3/4" ONLYStiles: MDF on only 1-3/8" Thickness & 6/8 Length.
FJ Softwood option on 1-3/8" and 1-3/4" Thickness, to 8/0 length.Width = 1" Nominal, 13/16" Minimum after prefit size.
Rails: 1-3/8" Thickness = MDF, 1-5/8" Nominal, 1" Minimum after undercut1-3/4" Thickness = MDF, 2-1/4" Nominal, 1" Minimum after undercut2" Nominal Bottom rail available on 1-3/8 Thickness (DBR)
Core: Cellular Honeycomb build up pads.Lock Blocks: Double 3" x 10" Particleboard (28lb) as standard.
Faces: Primed MDF Molded Panel, Single plyAdhesive: Type-1 PVA, Interior installation only .
Machining: To SpecificationLites: N/A
Louvers: N/AAcoustical Rating: N/A
Warranty: Standard two year. See limited warranty for details.*No warranty for Telegraphing*
Description (FP-1-3/8) = 1-3/8" Thick, MDF StilesAbbreviations: (FJ-1-3/8) = 1-3/8" Thick, FJ Softwood Stiles
(FJ-1-3/4) = 1-3/4" Thick, FJ Softwood StilesRecommended Residential and Light Commercial
Use:02
*See molded skin selection guide for all panel elevation designs.
DOOR SPECIFICATIONS
ABS - Manufacturing888-454-2888 Phone888-454-2889 Fax
10/1/16Door Specification
Page 3
BIFOLDING DOORSSpecifications: Bifolding doors are available in the following door types.
Hollow Core Flush, Hollow Core Molded Panel, Molded Panel EconomyParticleboard Core, Flush Economy Particleboard Core, Flush Standard Particleboard Core
Maximum Sizes: See Specific Door Type.Thickness: See Specific Door Type.
Stiles: 1" WoodRails: 1-5/8" Wood on 1-3/8" Thickness.
2-1/4" Wood on 1-3/4" Thickness.Core: See Specific Door Type.
Lock Blocks: See Specific Door Type.Faces: See Specific Door Type.
Adhesive: Type-1 PVA, Interior installation only .Machining: N/A
Lites: N/ALouvers: N/A
Acoustical Rating: N/AWarranty: Standard two year. See limited warranty for details.( See Specific Door Type)
Description See Specific Door Type.Abbreviations:
Recommended Residential and Light CommercialUse:
Hardware: US 15 Hinges - Edge mount window hinge on Hollow Core3-1/2" full mortise hinge on Solid CoreStandard Duty Track & Hardware - Stanley #2900 Series.Heavy Duty Track & Hardware - Stanley #2700 Series.
03* All bifolds are boxed with track and hardware. Non boxed ( bulk packaging)available on request.
10/1/16Door Specification
Page 4
DOOR SPECIFICATIONS
ABS - Manufacturing888-454-2888 Phone888-454-2889 Fax
MOLDED PANEL "ECONOMY" PARTICLEBOARD CORESpecifications: 3 Ply construction. Meets or exceeds industry standards
of WDMA I.S.1.Lay Up Method Loose
Maximum Sizes: Width - 3/0Length - 8/0 *Certain sty les only*
Thickness: 1-3/8" and 1-3/4" ONLYStiles: FJ Softwood
Width = 1" Nominal, 13/16" Minimum after prefit size.Rails: 1-3/8" Thickness = MDF, 1-5/8" Nominal, 1" Minimum after undercut
1-3/4" Thickness = MDF, 2-1/4" Nominal, 1" Minimum after undercutCore: 28-30lb Particleboard, ANSI A208.1 Grade LD-1, Profiled
Fire Rating: 1-3/4" Thickness 20 Minute Rated**Faces: Primed MDF Molded Panel, Single ply
Adhesive: Type-1 PVA, Interior installation only .Machining: To Specification
Lites: N/ALouvers: N/A
Acoustical Rating: 33 STC Inoperable Warranty: Standard two year. See limited warranty for details.
Description E-1-3/8 = 1-3/8" Thick PBC Molded PanelAbbreviations: E-20NL = 1-3/4" Thick PBC Molded Panel ( Non-rated)
E-20NP = 1-3/4" Thick PBC Molded Panel, 20 Minute Neutral PressureE-20B = 1-3/4" Thick PBC Molded Panel, 20 Minute Category BE-20A = 1-3/4" Thick PBC Molded Panel, 20 Minute Category A
Recommended Residential and Light CommercialUse:
04* See molded skin selection guide for all panel elevation designs.**See f ire door specif ications section in catalogue for details on sizes, hardw are and construction limitations.
DOOR SPECIFICATIONS
ABS - Manufacturing888-454-2888 Phone888-454-2889 Fax
10/1/16Door Specification
Page 5
FLUSH "ECONOMY" PARTICLEBOARD CORESpecifications: 3 & 5 Ply construction. Meets or exceeds industry standards of WDMA
I.S.1; All 20 Minute doors have been tested in conformance to the followingstandards. ASTM-E-152,CSFM-43.7,CAN4-S104,NFPA-252, UBC-7-2-97,UL-10C
Lay Up Method LooseMaximum Sizes: Width - 4/0
Length - Depends on faces (See faces below for available length)Thickness: 1-3/8" and 1-3/4" ONLY
Stiles: Softwood (Fir, Pine, Spruce, SCL) Mill optionWidth = 1" Nominal, 13/16" Minimum after prefit size.
Rails: 1-3/8" Thickness = MDF, 1-5/8" Nominal, 1" Minimum after undercut1-3/4" Thickness = MDF, 2-1/4" Nominal, 1" Minimum after undercut
Core: 28-30lb Particleboard, ANSI A208.1 Grade LD-1Fire Rating: 1-3/4" Thickness 20 Minute Rated*
Faces: Raw only Lauan (Okuome) 2 Ply, 8/0 Max length.Raw only RN Birch 2 Ply, MDF Back, 1/64" Face Veneer, 8/0 Max lengthRaw only PS Red Oak 2 Ply , MDF Back, 1/64" Face Veneer, 8/0 Max lengthRaw MDF Single Ply , 10/0 Max lengthPrimed MDF Single Ply , 10/0 Max lengthEmbossed Primed MDF Single Ply , 8/0 Max lengthEmbossed Prefinished MDF (Legacy) Single Ply , 8/0 Max length
Adhesive: Type-1 PVA, Interior installation only.Machining: To Specification
Lites: To SpecificationLouvers: To Specification
Acoustical Rating: 32 STC Operable See www.doormerica.com for seal information
Warranty: Standard Two year. See limited warranty for details.Description E-1-3/8 = 1-3/8" Thick PBC
Abbreviations: E-20NL = 1-3/4" Thick PBC, Non RatedE-20NP = 1-3/4" Thick PBC, 20 Minute Neutral PressureE-20B = 1-3/4" Thick PBC, 20 Minute Category BE-20A = 1-3/4" Thick PBC, 20 Minute Category A
Recommended Residential and Light CommercialUse:
05*See fire door specif ications section in catalogue for details on sizes, hardw are and construction limitations.
10/1/16Door Specification
Page 6
DOOR SPECIFICATIONS
ABS - Manufacturing888-454-2888 Phone888-454-2889 Fax
FLUSH "STANDARD" PARTICLEBOARD CORESpecifications: 3, 5 Ply construction. Meets or exceeds industry standards of WDMA
I.S.1; All 20 Minute doors have been tested in conformance to the followingstandards. ASTM-E-152,CSFM-43.7,CAN4-S104,NFPA-252, UBC-7-2-97,UL-10C
Lay Up Method LooseMaximum Sizes: Width - 4/0
Length - Depends on faces (See faces below for available length)Thickness: 1-3/8" and 1-3/4" ONLY
Stiles: Paint Grade = FJ Hardwood, Raw Stain Grade = Matching HardwoodPrefinished = Matching HardwoodP-lam = SCL with matching edge banding overCAT-A = Special CAT-A Stile with matching edge banding overWidth = 1" Nominal, 13/16" Minimum after prefit size.Hardwood stiles are 2 ply . Matching hardwood by Poplar or SCL (mill option)
Rails: 1-3/8" Thickness = MDF, 1-5/8" Nominal, 1" Minimum after undercut1-3/4" Thickness = MDF, 2-1/4" Nominal, 1" Minimum after undercut
Core: 28-30lb Particleboard, ANSI A208.1 Grade LD-1Fire Rating: 1-3/4" Thickness 20 Minute Rated*
Faces: RN Birch 2 Ply, MDF Back, 1/64" Face Veneer, 8/0 Max lengthPS Red Oak 2 Ply , MDF Back, 1/64" Face Veneer, 8/0 Max lengthRaw MDF Single Ply , 10/0 Max lengthPrimed MDF Single Ply , 10/0 Max lengthPrimed MDO 2 Ply HDF Back, 10/0 Max lengthSelect Species Raw & Prefinished 2 Ply , 1/42" Face, 10/0 Max lengthPlastic Laminate 2 Ply , 1/50" Face, 10/0 Max length. All laminates meet orexceeds NEMA standards.
Adhesive: Type-1 PVA, Interior installation only .Machining: To Specification
Lites: To SpecificationLouvers: To Specification
Acoustical Rating: 32 STC Operable See www.doormerica.com for seal informationWarranty: Standard two year. See limited warranty for details.
Description S-1-3/8 = Standard 1-3/8" Thick PBCAbbreviations: S-20NL = Standard 1-3/4" Thick PBC, Non Rated
S-20NP = Standard 1-3/4" Thick PBC, 20 Minute Neutral PressureS-20B = Standard 1-3/4" Thick PBC, 20 Minute Category BS-20A = Standard 1-3/4" Thick PBC, 20 Minute Category A
Recommended Residential and Light CommercialUse:
06*See fire door specif ications section in catalogue for details on sizes, hardw areand construction limitations.
DOOR SPECIFICATIONS
ABS - Manufacturing888-454-2888 Phone888-454-2889 Fax
10/1/16Door Specification
Page 7
FLUSH "HEAVY DUTY" PARTICLEBOARD CORESpecifications: 5 Ply construction. Meets or exceeds industry standards of WDMA I.S.1-A,
WI Section 12, AWI Section 1300 Custom Grade ( A Grade Faces), AWI Section1300 Premium Grade ( AA Grade Faces). All 20 Minute doors have beentested in conformance to the following standards. ASTM-E-152, CSFM-43.7,CAN4-S104, NFPA-252, UBC-7-2-97, UL-10C
Lay Up Method Bonded and SandMaximum Sizes: Width - 4/0
Length - Depends on faces (See faces below for available length)Thickness: 1-3/8" and 1-3/4" ONLY
Stiles: Paint Grade = FJ Hardwood, Raw Stain Grade = Matching HardwoodPrefinished = Matching HardwoodP-lam = SCL with matching edge banding overCAT-A = Special CAT-A Stile with matching edge banding overWidth = 1-3/8" MinimumHardwood stiles are 2 ply . Matching hardwood by Poplar or SCL (mill option)
Rails: 1-3/8" Thickness = Wood or SCL 1-1/8" Minimum 1-3/4" Thickness = Wood or SCL 1-1/8" Minimum
Core: 34lb Particleboard, ANSI A208.1 Grade LD-2Fire Rating: 1-3/4" Thickness 20 Minute Rated*
Faces: Primed MDO 2 Ply HDF Back, 10/0 Max lengthSelect Species Raw & Prefinished 2 Ply , 1/42" Face, 10/0 Max lengthPlastic Laminate 2 Ply, 1/50" Face, 10/0 Max length. All laminates meet orexceed NEMA standards.
Adhesive: Type-1 PVA, Interior installation only.Machining: To Specification
Lites: To SpecificationLouvers: To Specification
Acoustical Rating: 33 STC Operable See www.doormerica.com for seal informationWarranty: Lifetime. See limited warranty for details.
Description HD-1-3/8 = Heavy Duty 1-3/8" Thick PBCAbbreviations: HD-20NL = Heavy Duty 1-3/4" Thick PBC, Non Rated
HD-20NP = Heavy Duty 1-3/4" Thick PBC, 20 Minute Neutral PressureHD-20B = Heavy Duty 1-3/4" Thick PBC, 20 Minute Category BHD-20A = Heavy Duty 1-3/4" Thick PBC, 20 Minute Category A
Recommended ArchitecturalUse:
07*See fire door specif ications section in catalogue for details on sizes, hardw areand construction limitations.
10/1/16Door Specification
Page 8
DOOR SPECIFICATIONS
ABS - Manufacturing888-454-2888 Phone888-454-2889 Fax
FLUSH "EXTRA HEAVY DUTY"STRUCTURAL COMPOSITE CORE
Specifications: 5 Ply construction. Meets or exceeds industry standards of WDMA I.S.1-A,WI Section 12, AWI Section 1300 Custom Grade( A Grade faces),AWI Section 1300 Premium Grade (AA Grade Faces). All 20 and 45 Minutedoors have been tested in conformance to the following standards. ASTM-E-152CSFM-43.7, CAN4-S104, NFPA-252;UBC-7-2-97, UL-10C
Lay Up Method Bond and SandMaximum Sizes: Width - 4/0
Length - Depends on faces (See faces below for available length)Thickness: 1-3/8" and 1-3/4" ONLY
Stiles: Paint Grade = FJ Hardwood, Raw Stain Grade = Matching HardwoodPrefinished = Matching HardwoodP-lam = SCL with matching edge banding overCAT-A = Special CAT-A Stile with matching edge banding overWidth = 1-3/8" MinimumHardwood stiles are 2 ply . Matching hardwood by Poplar or SCL (mill option)
Rails: 1-3/8" Thickness = Wood or SCL 1-1/8" Minimum 1-3/4" Thickness = Wood or SCL 1-1/8" Minimum
Core: Structural Composite Lumber (Engineered), Grade LD-2Fire Rating: 1-3/4" Thickness 20 Minute Rated*; 1-3/4" Single Swing 45 Minute rated**
Faces: Primed MDO 2 Ply HDF Back, 10/0 Max lengthSelect Species Raw & Prefinished 2 Ply , 1/42" Face, 10/0 Max lengthPlastic Laminate 2 Ply , 1/50" Face, 10/0 Max length. All laminates meet orexceed NEMA standards.
Adhesive: Type-1 PVA, Interior installation only .Machining: To Specification
Lites: To SpecificationLouvers: To Specification
Acoustical Rating: 34 STC Operable See www.doormerica.com for seal informationWarranty: Lifetime. See limited warranty for details.
Description EHD-1-3/8 = Extra Heavy Duty 1-3/8" Thick SCLAbbreviations: EHD-20NL = Ex tra Heavy Duty 1-3/4" Thick SCL, Non Rated
EHD-20NP = Extra Heavy Duty 1-3/4" Thick SCL, 20 Minute Neutral PressureEHD-20B = Extra Heavy Duty 1-3/4" Thick SCL, 20 Minute Category BEHD-20A = Extra Heavy Duty 1-3/4" Thick SCL, 20 Minute Category AEHD-45NP = Extra Heavy Duty 1-3/4" Thick SCL, 45 Minute Neutral Pressure **EHD-45B = Extra Heavy Duty 1-3/4" Thick SCL, 45 Minute Category B **EHD-45A = Extra Heavy Duty 1-3/4" Thick SCL, 45 Minute Category A **
Recommended Architectural, InstitutionalUse:
08*See fire door specif ications section in catalogue for details on sizes, hardw areand construction limitations.** Single Sw ing only on 45 Minte Fire Rated; Max size 4/0 8/0
DOOR SPECIFICATIONS
ABS - Manufacturing888-454-2888 Phone888-454-2889 Fax
10/1/16Door Specification
Page 9
FLUSH "SOUND RETARDANT DOOR"Specifications: 3 & 5 Ply construction. Meets or exceeds industry standards of WDMA I.S.1-A,
WI Section 12, AWI Section 1300 Custom Grade( A Grade faces),AWI Section 1300 Premium Grade (AA Grade Faces).
Lay Up Method Bond and SandMaximum Sizes: Width - 4/0
Length - 8/0Thickness: 1-3/4" ONLY
Stiles: Paint Grade = FJ Hardwood, Raw Stain Grade = Matching HardwoodPrefinished = SCL with matching edge banding overP-lam = SCL with matching edge banding overWidth = 1-3/8" MinimumHardwood stiles are 2 ply . Matching hardwood by Poplar or SCL (mill option)
Rails: 1-3/4" Thickness = Wood, SCL 1-1/8" Minimum Core: STC 42: RIGICOREGPCore: STC 45: RIGICOREEX
Fire Rating: N/AFaces: Primed MDO 2 Ply HDF Back,
Select Species Raw & Prefinished 2 Ply , 1/42" Face, Plastic Laminate 2 Ply , 1/50" Face, . All laminates meet orexceed NEMA standards.
Adhesive: Type-1 PVA, Interior installation only .Machining: To Specification
Lites: STC 39 Max Lite kit 22x36 - See www.doormerica.com for kit and glass detailsLouvers: N/A
Acoustical Rating: 43 STC Operable - Nonrated and 20 Min Fire45 STC Operable - Nonrated, 20 Min Fire, and 45 Min FireSee www.doormerica.com for seal information
Warranty: Lifetime. See limited warranty for details.STC Opening Varies. See www.doormerica.com for seal informationComponents
Recommended Architectural, InstitutionalUse:
13*See fire door specif ications section in catalogue for details on sizes, hardw areand construction limitations.
10/1/16Door Specification
Page 10
DOOR SPECIFICATIONS
ABS - Manufacturing888-454-2888 Phone888-454-2889 Fax
FLUSH MINERAL CORE 45-60-90 MINUTE RATEDSpecifications: 3, 5 Ply construction. Meets or exceeds industry standards of WDMA I.S.1-A,
WI Section 12, AWI Section 1300. Testing Standards ASTM-E-152, CSFM 43.7CAN4-S104, NFPA-252, UBC-7-2-97, UL10C
Lay Up Method Bond and SandMaximum Sizes: Width - 4/0
Length - Depends on faces (See faces below for available length)Thickness: 1-3/4" Only
Stiles: Laminated Composite to wood (Georgia Pacific), Specific to rating*Edge banding veneer or plastic when matching edges required
Rails: Laminated Composite to wood (Georgia Pacific), Specific to rating*Width = 1" Minimum
Core: Gypsum MineralFire Rating: 45-60-90 Minute Rated*
Faces: RN Birch 2 Ply , MDF Back, 1/64" Face Veneer, 8/0 Max length.Light Commercial PS Red Oak 2 Ply , MDF Back, 1/64" Face Veneer, 8/0 Max length.
Raw MDF Single Ply, 10/0 Max length Primed MDF Single Ply , 10/0 Max length Embossed Primed MDF Single Ply, 8/0 Max length Embossed Prefinished MDF (Legacy) Single Ply , 8/0 Max length
Faces: Primed MDO 2 Ply HDF Back, 10/0 Max lengthArchitectural Select Species Raw & Prefinished 2 Ply, 1/42" Face, 10/0 Max length
Plastic Laminate 2 Ply , 1/50" Face, 10/0 Max length. All laminates meet orexceed NEMA standards.
Adhesive: Type-1 PVA, Interior installation only .Machining: To Specification
Lites: To SpecificationLouvers: To Specification
Temp Rise: 30 Minutes 250 Degrees max imum.Acoustical Rating: 30 STC Operable See www.doormerica.com for seal information
Warranty: Lifetime. See limited warranty for details.Description MC-45NP = Mineral Core 45 Minute, Neutral Pressure
Abbreviations: MC-45B = Mineral Core 45 Minute, Category BMC-45A = Mineral Core 45 Minute, Category AMC-60NP = Mineral Core 60 Minute, Neutral PressureMC-60B = Mineral Core 60 Minute, Category BMC-60A = Mineral Core 60 Minute, Category AMC-90NP = Mineral Core 90 Minute, Neutral PressureMC-90B = Mineral Core 90 Minute, Category BMC-90A = Mineral Core 90 Minute, Category A
Recommended Architectural, Light CommercialUse:
09*See f ire door specif ications section in catalogue for details on sizes, hardw areand construction limitations.
DOOR SPECIFICATIONS
ABS - Manufacturing888-454-2888 Phone888-454-2889 Fax
10/1/16Door Specification
Page 11
MOLDED PANEL MINERAL CORE 45-60 MINUTE RATEDSpecifications: 3 Ply construction. Meets or exceeds industry standards of WDMA I.S.1
Testing Standards ASTM-E-152, CSFM 43.7,CAN4-S104, NFPA-252, UBC-7-2-97, UL10C
Lay Up Method Bond and SandMaximum Sizes: Width - 3/0
Length - 7/0Thickness: 1-3/4" ONLY
Stiles: Laminated Composite to wood (Georgia Pacific), Specific to rating*Rails: Laminated Composite to wood (Georgia Pacific), Specific to rating*
Width = 1" MinimumCore: Gypsum Mineral
Fire Rating: 45-60 Minute Rated*Faces: Primed Molded Panel Single Ply
Adhesive: Type-1 PVA, Interior installation only .Machining: To Specification
Lites: N/ALouvers: N/A
Temp Rise: 30 Minutes 250 Degrees max imum.Acoustical Rating: 20 STC Opearble (No Seal)
29 STC Operable (With seal / Pemko S773)Warranty: Standard Two year. See limited warranty for details.
Description MC-45NP = Mineral Core 45 Minute, Neutral PressureAbbreviations: MC-45B = Mineral Core 45 Minute, Category B
MC-45A = Mineral Core 45 Minute, Category AMC-60NP = Mineral Core 60 Minute, Neutral PressureMC-60B = Mineral Core 60 Minute, Category BMC-60A = Mineral Core 60 Minute, Category A
Recommended Light CommercialUse:
10*See f ire door specif ications section in catalogue for details on sizes, hardw areand construction limitations.
10/1/16Door Specification
Page 12
DOOR SPECIFICATIONS
ABS - Manufacturing888-454-2888 Phone888-454-2889 Fax
WOOD VISION LITE KITSNON RATED
PRODUCT FEATUES:Use For use with non rated doors.Species Available Birch, Cherry, Mahogany, Maple, Red Oak, Walnut and White Oak.Sizes Various sizes available in full-inch increments up to maximum area / size listed below.Listed ITS.Glass size Glass should be cut 1/8" less in length and width than wood beaded lite size ordered.Parts List (1) one instruction sheet.
(8) eight prefit wood beads with nails pre-fitted into the lite opening.(1) one tube of silicone caulk or glazing tape. (EPDM or Norton V990) supplied with glass by glazers.
GLASS
DOOR
12
316
FULL LIP BEAD W-7
GLASS
DOORFLUSH BEAD W-9
38
DOOR SPECIFICATIONS
ABS - Manufacturing888-454-2888 Phone888-454-2889 Fax
10/1/16Door Specification
Page 13
METAL VISION LITE KITS
10/1/16Door Specification
Page 14
DOOR SPECIFICATIONS
ABS - Manufacturing888-454-2888 Phone888-454-2889 Fax
METAL LOUVER KITS
DOOR SPECIFICATIONS
ABS - Manufacturing888-454-2888 Phone888-454-2889 Fax
10/1/16Door Specification
Page 15
STC METAL VISION LITE KITS
10/1/16Door Specification
Page 16
DOOR SPECIFICATIONS
ABS - Manufacturing888-454-2888 Phone888-454-2889 Fax
TECHNICAL DATAThe LEED (Leadership in Energy and Environmental Design) Green Building Rating System wasoriginally developed by the U.S. Green Building Council (USGBC) to provide a recognized standard forthe construction industry to assess the environmental sustainability of building designs.
ABS Manufacturing is committed to engineering our manufacturing processes so that we may assistour customers in achieving their LEED certification rating. The chart below lists all of our product linesand what total LEED credits can be earned.
LEED LEED CriteriaCredit
ExtraMaterials & Resources Hollow Economy Standard Heavy Duty Heavy Duty Mineral STC
PBC Core PBC Core PBC Core SCL Core Core CoreMR 4 Recycled Content: 10% YES YES YES YES No No No
Pre-ConsumerMR 4 Recycled Content: 20% YES YES YES YES No No No
Pre-ConsumerMR 5 Regional materials: 10% YES* YES* YES* YES* YES* YES* No
if within 500 milesMR 5 Regional materials: 20% YES* YES* YES* YES* YES* YES* No
if within 500 milesMR 6 Rapidly Renewable No No No No No No No
Materials:MR 7 FSC Certified Wood: No No No No YES YES No*Location of project determines eligibility. Extracted and Manufactured, Harvested or Recovered w ithin 500 mile radius of project site.
Indoor Environmental QualityIEQ 4.1 Low Emitting Materials: YES** YES** YES** YES** YES** YES** YES**
Adhesives & SealantsIEQ 4.2 Low Emitting Materials: YES** YES** YES** YES** YES** YES** YES**
Paints & CoatingsIEQ 4.4 No Added Urea YES YES YES YES YES YES YES
FormaldehydeIEQ 9 Acoustical Rating No No No No No No Yes**IEQ 4.1 & 4.2 applies to adhesives, sealants, paints and coatings applied at project site.
Innovation in DesignID 2 LEED AP YES YES YES YES YES YES YES
11
Product Lines - Standard Construction
DOOR SPECIFICATIONS
ABS - Manufacturing888-454-2888 Phone888-454-2889 Fax
10/1/16Door Specification
Page 17
TECHNICAL DATAThe LEED (Leadership in Energy and Environmental Design) Green Building Rating System wasoriginally developed by the U.S. Green Building Council (USGBC) to provide a recognized standard forthe construction industry to assess the environmental sustainability of building designs.
ABS Manufacturing is committed to engineering our manufacturing processes so that we may assistour customers in achieving their LEED certification rating. The chart below lists all of our productlines and what total LEED credits can be earned.
LEED LEED CriteriaCredit
ExtraMaterials & Resources Hollow Economy Standard Heavy Duty Heavy Duty Mineral STC
PBC Core PBC Core PBC Core SCL Core Core CoreMR 4 Recycled Content: 10% YES YES YES YES No No No
Pre-ConsumerMR 4 Recycled Content: 20% YES YES YES YES No No No
Pre-ConsumerMR 5 Regional materials: 10% YES* YES* YES* YES* YES* YES* No
if within 500 milesMR 5 Regional materials: 20% YES* YES* YES* YES* YES* YES* No
if within 500 milesMR 6 Rapidly Renewable No YES YES YES No No No
Materials:MR 7 FSC Certified Wood: No YES YES YES YES No No*Location of project determines eligibility. Extracted and Manufactured, Harvested or Recovered w ithin 500 mile radius of project site.
Indoor Environmental QualityIEQ 4.1 Low Emitting Materials: YES** YES** YES** YES** YES** YES** YES**
Adhesives & SealantsIEQ 4.2 Low Emitting Materials: YES** YES** YES** YES** YES** YES** YES**
Paints & CoatingsIEQ 4.4 No Added Urea YES YES YES YES YES YES YES
FormaldehydeIEQ 9 Acoustical Rating No No No No No No YES **IEQ 4.1 & 4.2 applies to adhesives, sealants, paints and coatings applied at project site.
Innovation in DesignID 2 LEED AP YES YES YES YES YES YES YES
12
Product Lines - With Special Ordered Materials*Minimum quantities and special lead times will apply