horizon 2020 research and innovation framework programme, … · 2018. 11. 1. · rms ip beam size...
TRANSCRIPT
CONSOLIDATED EIR DESIGN BASELINE
EuroCirCol-P3-WP3-M3.6
Date: 01/11/2018
Grant Agreement 654305 PUBLIC 1 / 17
Grant Agreement No: 654305
EuroCirCol European Circular Energy-Frontier Collider Study
Horizon 2020 Research and Innovat ion Framework Programme, Research and Innovat ion Act ion
MILESTONE REPORT
CONSOLIDATED EIR DESIGN BASELINE
Document identifier: EuroCirCol-P3-WP3-M3.6
Due date: End of Month 41 (November 1, 2018)
Report release date: 01/11/2018
Work package: WP3 (Experimental Interaction Region)
Lead beneficiary: CERN
Document status: RELEASED (V1.0)
Abstract:
Report on the collider Experimental Insertion Region design and its key elements considering the
cumulative findings of all studies carried out so far, usable as input for the preparation of the
Conceptual Design Report.
CONSOLIDATED EIR DESIGN BASELINE
EuroCirCol-P3-WP3-M3.6
Date: 01/11/2018
Grant Agreement 654305 PUBLIC 2 / 17
Copyright notice:
Copyright © EuroCirCol Consortium, 2015
For more information on EuroCirCol, its partners and contributors please see www.cern.ch/eurocircol.
The European Circular Energy-Frontier Collider Study (EuroCirCol) project has received funding
from the European Union's Horizon 2020 research and innovation programme under grant No
654305. EuroCirCol began in June 2015 and will run for 4 years. The information herein only
reflects the views of its authors and the European Commission is not responsible for any use that
may be made of the information.
Delivery Slip
Name Partner Date
Authored by Rogelio Tomas
Roman Martin CERN 15/10/18
Edited by Julie Hadre
Johannes Gutleber CERN 24/10/18
Reviewed by Michael Benedikt
Daniel Schulte CERN 29/10/18
Approved by EuroCirCol Coordination Committee 31/10/18
CONSOLIDATED EIR DESIGN BASELINE
EuroCirCol-P3-WP3-M3.6
Date: 01/11/2018
Grant Agreement 654305 PUBLIC 3 / 17
TABLE OF CONTENTS
1. OVERVIEW ............................................................................................................................................................. 4
2. KEY ISSUES ........................................................................................................................................................ 4 3. MDI CONSIDERATIONS ....................................................................................................................................... 5 4. SYSTEM LAYOUT AND OPTICS ............................................................................................................................ 6 4.1. FINAL FOCUS TRIPLET ........................................................................................................................................ 7 4.2. BEAM-BEAM EFFECTS AND CROSSING ANGLE .................................................................................................. 10 4.3. DYNAMIC APERTURE WITH TRIPLET ERRORS .................................................................................................... 11 4.4. CRAB CAVITIES ................................................................................................................................................ 12
5. LOW LUMINOSITY INTERACTION REGION .............................................................................................. 14
6. CONCLUSION ...................................................................................................................................................... 15
7. REFERENCES ....................................................................................................................................................... 16
8. ANNEX GLOSSARY ............................................................................................................................................ 17
CONSOLIDATED EIR DESIGN BASELINE
EuroCirCol-P3-WP3-M3.6
Date: 01/11/2018
Grant Agreement 654305 PUBLIC 4 / 17
1. OVERVIEW
Much like the LHC, FCC-hh features two high luminosity interaction regions (IRs), situated in the
Points A and G as well as two low luminosity interaction regions in the points B and L. Table 1 shows
the two parameter sets, Baseline and Ultimate, for the high luminosity IRs and compares them with
the respective parameters of LHC and HL-LHC. The most notable difference between Baseline and
Ultimate are the goals for the β functions at the interaction point 𝛽∗.
Table 1: Key parameters of FCC-hh compared to LHC and HL-LHC.
LHC HL-LHC FCC-hh
Baseline Ultimate
Center-of-mass energy [TeV] 14 14 100
Injection energy [TeV] 0.45 0.45 3.3
Ring circumference [km] 26.7 26.7 97.75
Arc dipole field [T] 8.33 8.33 16
Number of IPs 2+2 2+2 2+2
Number of bunches per beam 𝒏𝒃 2808 2748 10400
Beam current [A] 0.58 1.11 0.5
Peak luminosity/IP [𝟏𝟎𝟑𝟒𝒄𝒎−𝟐𝒔−𝟏] 1 5 5 30
Events/crossing 27 135 170 1020
Stored beam energy [GJ] 0.4 0.7 8.4
Synchrotron power per beam [MW] 0.0036 0.0073 2.4
Arc synchrotron radiation
[W/m/beam]
0.18 0.350.35 28.4
IP beta function β* [m] 0.4 0.15 1.1 0.3
Bunch spacing [ns] 25 25 25
Initial norm. rms emittance [µm] 3.75 2.5 2.2
Initial bunch population Nb[𝟏𝟎𝟏𝟏] 1.15 2.2 1.0
Transv. emittance damping time [h] 25.8 25.8 1.1
RMS bunch length [cm] 7.55 7.55 8
RMS IP beam size [µm] 16.7 7.1 6.8 3.5
Full crossing angle [µrad] 285 590 104 200
2. KEY ISSUES
Early in the design phase of the interaction regions, the radiation load from collision debris has been
identified as a key issue of the final focus system. Unifying adequate protection of the triplet magnets
with a high luminosity performance has been the driving factor of the interaction region layout.
CONSOLIDATED EIR DESIGN BASELINE
EuroCirCol-P3-WP3-M3.6
Date: 01/11/2018
Grant Agreement 654305 PUBLIC 5 / 17
3. MDI CONSIDERATIONS
Early studies of the final focus system layout concluded that the main contributor to the minimum 𝛽∗
is the overall length of the triplet, while the 𝐿∗ plays a minor role. This led to a clear strategy to
minimize 𝛽∗ with significant amounts of shielding reducing the free aperture of the final focus
magnets: to choose the smallest 𝐿∗ that does not restrict the detector design and to increase triplet
length until dynamic aperture or chromaticity become obstacles. In this strategy the machine-detector
interface plays a key role as it defines 𝐿∗. A sketch of the detector region layout is shown in Error!
Reference source not found.. While the detector has a total length of about 50 m, extending to 25 m
on either side of the IP, the opening scenario requires a total cavern length of 66 m. During operation,
the gap between detector and cavern wall will be occupied by the forward shielding that protects the
detector from secondaries back-scattered from the TAS. The aperture in the 2 m thick wall between
cavern and tunnel is equipped with a cast iron absorber to complete the forward shielding. The TAS,
a 3 m long copper absorber that protects the final focus magnets from collision debris is located 35 m
from the IP. With an additional space of 2 m reserved for vacuum equipment and for the end of the
magnet cryostat, first quadrupole of the final focus triplet starts at 𝐿∗ = 40 𝑚 .
The beam pipe at the IP is made of 0.8 mm thick beryllium and has an inner radius of 20 mm. This
pipe extends to ± 8 m to either side of the IP and is followed by a beryllium cone with an opening
angle of 2.5 mrad corresponding to η = 6. From 16 m from the IP on, the inner radius of the aluminium
beam pipe is constant at 40 mm, this is necessary for the opening of the detector.
Figure 1: Detector and interaction region layout leading to the L* = 40 m lattice. The IP is located at
(0,0).
CONSOLIDATED EIR DESIGN BASELINE
EuroCirCol-P3-WP3-M3.6
Date: 01/11/2018
Grant Agreement 654305 PUBLIC 6 / 17
4. SYSTEM LAYOUT AND OPTICS
Figure 2: Layout of the high luminosity interaction region. The layout is antisymmetric around the IP at (0,0).
The interaction region layout of FCC-hh follows the same principles as the LHC and HL-LHC
interaction regions. The layout is shown in Figure 2Error! Reference source not found.. Starting at
the Interaction Point (IP), the strongly focused and highly divergent beams pass a drift space with the
length 𝐿∗ chosen to accommodate the detector. Following this drift space, a final focus system
comprised of three large aperture quadrupoles (hence called the triplet) focuses the beams in both the
horizontal and vertical plane. The triplet consists of single aperture magnets that host both beams. The
triplets on both sides of the IP are powered antisymmetrically. This has the advantage that the triplet
region is optically identical for both beams. Behind the triplet, a shared aperture dipole D1 separates
the two beams. After a drift, the double bore dipole D2 bends the separated beams onto parallel orbits
again. The resulting reference orbits are shown in Figure 3. Also depicted are orbit excursions that let
the two beams collide with a crossing angle in order to avoid parasitic collisions outside the detector
area.
Figure 3: Reference orbits (solid lines) and closed orbits with crossing angles (dashed lines) in the inter
CONSOLIDATED EIR DESIGN BASELINE
EuroCirCol-P3-WP3-M3.6
Date: 01/11/2018
Grant Agreement 654305 PUBLIC 7 / 17
Four more quadrupoles Q4-Q7 make up the following matching section that occupies the rest of the
straight section. The straight section is connected to the arcs by a two cell dispersion suppressor. To
provide enough degrees of freedom to match all required beam parameters from the IP to the arcs, the
four matching section quadrupoles, the three individually powered quadrupoles of the dispersion
suppressor Q8-Q10 and well as three tuning quadrupoles in the first arc cell QT11-QT13 are used for
the matching procedure.
4.1. FINAL FOCUS TRIPLET
The final focus design strategy calls for a long triplet in order to achieve small 𝛽∗ values. In practice,
not only chromaticity and dynamic aperture were limiting factors for the triplet length, but also the
total length of the straight section that determines the arc side focal length of the final focus system,
as well as the strength of the Q7 quadrupole. Furthermore the lengths of individual magnets must be
equal or below 14.3 m in order to be compatible with a cryostat length of 15 m. The relative lengths
of Q1, Q2 and Q3 were adopted from HL-LHC. As suggested in [1], Q1 was chosen to have a smaller
aperture and higher gradient than Q2 and Q3 in order to minimize 𝛽∗. The specification for the triplet
quadrupoles are listed in Table 2 and the layout of the final focus triplet shown in Figure 4Error!
Reference source not found.. Q1 and Q3 are made up of two submagnets each with length of 14.3 m.
For the interconnects a drift space of 2 m is reserved between the submagnets.
Table 2: Parameters of triplet of the high luminosity EIRs.
The drift between Q1 and Q2 as well as Q2 and Q3 is longer at 7 m and must house orbit correctors,
BPMs and vacuum equipment. Q2 consists of four 12.5 m long submagnets. This not only allows for
a similar length ratio as in the HL-LHC but also to place orbit correctors in the cryostat of the outermost
Q2 magnets. Behind Q3, 18.8 m of space are reserved for higher order multipole correctors to
compensate triplet field errors.
Figure 4: Layout of the final focus triplet.
Magnet Coil aperture diameter
[mm]
Gradient [T/m] Length [m] Number per IP
Q1 164 130 14.3 4
Q2 210 105 12.5 8
Q3 210 105 14.3 4
CONSOLIDATED EIR DESIGN BASELINE
EuroCirCol-P3-WP3-M3.6
Date: 01/11/2018
Grant Agreement 654305 PUBLIC 8 / 17
A 35 mm thick inner shielding of INERMET180 protects the triplet magnets from collision debris.
Furthermore the free aperture is reduced a gap for the liquid helium for cooling (1.5 mm), the Kapton
insulator (0.5 mm), a beam screen (2.05 mm), a gab for the insulation of the beam screen (2.0 mm) as
well as the cold bore that scaled with 2.72 % of the coil aperture diameter, all of which have been
modelled as simple layers.
Figure 5: Optics of the main interaction region with β* = 0.3 m.
Despite this significant reduction of the free aperture, the triplet can accommodate a beam with lower
than ultimate 𝛽∗. Figure 5 shows the β functions and horizontal dispersion in the EIR and Figure 6 the
corresponding aperture usage. Although aperture and alignment tolerances are not included in Figure
5, the beam stay clear depicted in Figure 6 clearly shows that the ultimate optics have a significant
margin in terms of aperture. In fact, optics with almost 𝛽∗ = 0.2 m can be achieved, although the
chromaticity correction will not suffice with the current arc layout.
CONSOLIDATED EIR DESIGN BASELINE
EuroCirCol-P3-WP3-M3.6
Date: 01/11/2018
Grant Agreement 654305 PUBLIC 9 / 17
Figure 6: Overall layout of the insertion region between the IP and Q7. For each beam, the closed orbit, the 2 σ
envelope and the 15.5 σ envelope for the ultimate β* of 0.3 m are shown. The beam sizes include a beta beating of 10
% and a closed orbit uncertainty of 2 mm. Magnet apertures and the detector region beam pipe are illustrated with
light gray while absorbers are shown in dark gray. The large aperture triplet magnets leave significant aperture
margins.
Figure 7: Beam stay clear of the high luminosity EIR for horizontal crossing and ultimate as
well as beyond ultimate optics. For 𝛽∗ = 0.2 m the beam stay clear is just below the minimum
of 15.5 σ in the left Q1, suggesting a slightly larger 𝛽∗ can be accommodated.
CONSOLIDATED EIR DESIGN BASELINE
EuroCirCol-P3-WP3-M3.6
Date: 01/11/2018
Grant Agreement 654305 PUBLIC 10 / 17
4.2. BEAM-BEAM EFFECTS AND CROSSING ANGLE
Dynamic aperture has been studied for the full FCC optics together with beam-beam effects. The
results are shown in Figure 8. For these studies only two main EIRs have been taken into account.
Assuming an alternating horizontal and vertical crossing scheme to profit from the passive
compensation of the long-range tune and chromaticity shifts, it was found that a DA of 6 σ even at
high chromaticity operational scenarios requires a minimum crossing angle of θ = 200 µrad at ultimate
optics with 𝛽∗ = 0.3 𝑚. The corresponding orbit excursion is shown in Figure 9.
Figure 9: Orbit bump for a 200 µrad horizontal crossing angle required at β* = 0.3 m.
Figure 8: Dynamic aperture as a function of the crossing angle θ.
CONSOLIDATED EIR DESIGN BASELINE
EuroCirCol-P3-WP3-M3.6
Date: 01/11/2018
Grant Agreement 654305 PUBLIC 11 / 17
4.3. DYNAMIC APERTURE WITH TRIPLET ERRORS
The large β functions in the final focus triplet make the beam susceptible to field errors in these
magnets. In order to assess the impact on the dynamic aperture (DA), tracking studies were
performed using field errors derived from the HL-LHC final focus quadrupoles. Initial tracking
showed a very low dynamic aperture, however, the phase between the two main IPs, as well as non-
linear corrector packages close to the triplets have shown to increase the DA to acceptable levels of
more than 10 σ – 12 σ. These values are expected to leave a DA of 6 σ when beam-beam effects and
octupoles are added. The results of the tracking studies are shown in Figure 10. The baseline optics
with 𝛽∗ = 1.1 𝑚 show no issue with the DA. For the ultimate 𝛽∗ = 0.3 𝑚 the phase optimization
leads to a DA slightly above of 10 σ. This is just enough, however the non-linear correctors increase
the DA significantly, offering a safety margin, and are therefore recommended. Beyond ultimate
parameters make non-linear correctors mandatory.
Figure 10: Dynamic aperture as a function of β*.
CONSOLIDATED EIR DESIGN BASELINE
EuroCirCol-P3-WP3-M3.6
Date: 01/11/2018
Grant Agreement 654305 PUBLIC 12 / 17
4.4. CRAB CAVITIES
In the long shared aperture section around the IP, the two counterrotating beams must be separated by
an orbit bump in order to avoid parasitic crossings. The two beams only cross each other at the IP with
a crossing angle θ. The crossing angle determines the separation of the beam in the shared aperture
and thus the long range beam-beam effect. The minimum crossing angle was determined by beam-
beam studies to be 200 µrad for the ultimate 𝛽∗ of 0.3 m and then scaled for other optics to provide
the same normalized separation of ≈17 σ. Table 3 lists the crossing angle for a set of collision optics
together with the luminosity reduction factor caused by the reduced geometric overlap of the bunches
at the IP due to the crossing angle. For ultimate optics and beyond, FCC-hh is not able to provide even
half of the luminosity head-on collisions would provide. It is clear that the luminosity reduction in the
high luminosity EIRs must be compensated by crab cavities.
Table 3: Crossing angle and luminosity reduction due to crossing angle for different collision optics.
Optics version 𝜷∗ [m] Full crossing angle [µrad] Luminosity reduction factor
baseline 1.1 104 0.85
ultimate 0.3 200 0.40
beyond ultimate 0.2 245 0.28
Initial studies with crab cavities show that a crab voltage of 13.4 MV per beam on either side of each
high luminosity IP is needed to provide full crabbing in ultimate optics, corresponding to 107.2 MV
in total. Half of this voltage must be horizontally deflecting in one EIR, the other half vertically
deflecting in the other EIR. For optics beyond ultimate parameters, the crab voltage increases up to 8×
18.1 MV. Orbit leakage of the crab orbit into the arcs varied strongly during the evolution of the lattice.
In the latest lattice version it appears to be small, causing only small orbit aberrations in the other IPs.
More detailed studies should be performed to get a better control of the orbit leakage in the future. The
crab orbits and orbit leakage into the other high luminosity EIR are shown in Figure 11 for ultimate
optics.
CONSOLIDATED EIR DESIGN BASELINE
EuroCirCol-P3-WP3-M3.6
Date: 01/11/2018
Grant Agreement 654305 PUBLIC 13 / 17
Figure 11: Crab orbits for β* = 0.3 m and orbit leakage into the other high luminosity EIR.
CONSOLIDATED EIR DESIGN BASELINE
EuroCirCol-P3-WP3-M3.6
Date: 01/11/2018
Grant Agreement 654305 PUBLIC 14 / 17
5. LOW LUMINOSITY INTERACTION REGION
In the current FCC-hh design the low luminosity interaction regions in the points B and L have to
share the 1400 m long straight section with the injection. This significantly limits the available space,
as shown in Figure 12, and consequently the reachable performance. To save space the separation
and recombination dipoles are superconducting with fields of 12 T and 10 T respectively. The
parameters of the triplet quadrupoles are listed in Table 4. With these parameters, a 𝛽∗of 3.0 m can
be achieved at an 𝐿∗ of 25 m. This offers a luminosity in the order of 2 × 1034𝑐𝑚−2𝑠−1. To avoid
perturbances of the high luminosity experiments due to long range beam-beam effects, a crossing
angle of 180 µrad is applied. Due to the lower luminosity a copper mask is sufficient to protect the
triplet magnets from collision debris. Together with the 10 mm shielding inside the triplet aperture,
the magnet lifetime is in the order of 0.5 𝑎𝑏−1.
Table 4: Triplet parameters of the low luminosity EIRs
Magnet Length [m] Maximum
Gradient [T/m]
Inner coil
diameter
[mm]
Number Shielding
thickness
[mm]
Q1 10.0 265 64 8 10
Q2 15.0 270 64 8 10
Q3 10.0 260 64 8 10
Figure 12: Layout of the combined injection and experimental insertion at point B.
CONSOLIDATED EIR DESIGN BASELINE
EuroCirCol-P3-WP3-M3.6
Date: 01/11/2018
Grant Agreement 654305 PUBLIC 15 / 17
6. CONCLUSION
In summary the WP3 group has produced a robust lattice that meets the performance expectations. The
design of the high luminosity experimental insertion region is capable of running with the ultimate
parameter set and has the potential to even exceed the goals. It is fully compatible with the detector
design and opening scenarios as well as the overall FCC-hh design. The crossing angle was chosen to
offer operational margins. The required strength of the crab cavities is compatible with current
assumptions for HL-LHC. Studies of collision debris indicate that the thick shielding inside final focus
triplet can protect the magnets sufficiently, requiring only a single magnet replacement to reach the
integrated luminosity goal even under conservative assumptions. The dynamic aperture studies are
encouraging, but further work will be needed to evaluate the interplay of beam-beam effects, Landau
octupoles and field errors. Additionally, future studies should aim to provide an optimized squeezing
scheme, making best use of the evolution of emittance and bunch charge.
CONSOLIDATED EIR DESIGN BASELINE
EuroCirCol-P3-WP3-M3.6
Date: 01/11/2018
Grant Agreement 654305 PUBLIC 16 / 17
7. REFERENCES
[1] R. d. Maria, "Layout design for final focus systems and applications for the LHC interaction region upgrade, LHC-
PROJECT-Report-1051," 2007.
[2] E. Cruz-Alaniz, Dynamic Aperture studies of FCC-hh at collision,
https://indico.cern.ch/event/733292/contributions/3147550/attachments/1735697/2807314/CruzEurocircol18.pdf:
Presented at the 4th EuroCirCol meeting, 2018.
[3] E. Cruz-Alaniz, "Methods to Increase the Dynamic Aperture of the FCC-hh Lattice," in IPAC, Vancouver, BC,
Canada, 2018.
[4] A. Seryi and a. et, "Overview of Design Development of FCC-hh Experimental Interaction Regions," in IPAC,
Copenhagen, Denmark, 2017.
[5] T. Pieloni, Beam-Beam Studies for FCC-HH, Presented at FCC week 2018.
[6] M. Hofer, Optics Design for the Low Luminosity Experiments in the FCC-hh, Thesis, 2017.
CONSOLIDATED EIR DESIGN BASELINE
EuroCirCol-P3-WP3-M3.6
Date: 01/11/2018
Grant Agreement 654305 PUBLIC 17 / 17
8. ANNEX GLOSSARY
SI units and formatting according to standard ISO 80000-1 on quantities and units are used throughout
this document where applicable.
ATS Achromatic Telescopic Squeezing
BPM Beam Position Monitor
c.m. Centre of Mass
DA Dynamic Aperture
DIS Dispersion suppressor
ESS Extended Straight Section
FCC Future Circular Collider
FCC-ee Electron-positron Collider within the Future Circular Collider study
FCC-hh Hadron Collider within the Future Circular Collider study
FODO Focusing and defocusing quadrupole lenses in alternating order
H1 Beam running in the clockwise direction in the collider ring
H2 Beam running in the anti-clockwise direction in the collider ring
HL-LHC High Luminosity – Large Hadron Collider
IP
IR
Interaction Point
Interaction Region
LHC
LLIR
Large Hadron Collider
Low Luminosity Interaction Region
LAR Long arc
LSS Long Straight Section
MBA
MIR
Multi-Bend Achromat
Main Interaction Region
Nb3Sn Niobium-tin, a metallic chemical compound, superconductor
Nb-Ti Niobium-titanium, a superconducting alloy
RF Radio Frequency
RMS Root Mean Square
σ RMS size
SAR Short arc
SR Synchrotron Radiation
SSC Superconducting Super Collider
TSS Technical Straight Section