handrill sdn. bhd. - handal resources...

29
A Subsidiary of Handal Resources Berhad Accelerating Our Pace Handrill Sdn. Bhd. (802490-w) In partnership with:

Upload: doanminh

Post on 29-Jul-2018

212 views

Category:

Documents


0 download

TRANSCRIPT

A Subsidiary of Handal Resources Berhad

Accelerating Our Pace

Handrill Sdn. Bhd. (802490-w)

In partnership with:

Table Of Contents

2

3 GMD’s & CEO Handal

4 Business Overview

5-6

7-8

9

10

11-13

14-15

16

17-31

Objective ,Mission &Vission

Registrations & Licences

Working Experience

Product & Services

Health,Safety & EnviromentPolicy

Strategic Partners

Handal Rig & Fleet Status

Rig Speci�cations

3

Group Managing Director& Chief Executive O�cerHandal Resources Berhad

Encik Mallek Rizal bin Mohsin is the Managing Director and Chief Executive O�cer of the Group. He is also the Executive Director of Handal O�shore Services Sdn Bhd, Handal Engineering Sdn Bhd and Handrill Sdn Bhd. He was appointed to the Board on 7 May 2009.He is a quali�ed Chartered Accountant from the Malaysian Institute of Accountants (MIA) and the Institute of Chartered Accountants New Zealand (ICANZ). Also, he holds a Bachelor of Management Studies from the Univer-sity of Waikato, New Zealand. He has extensive working experience from the various positions that he holds at major corporations prior to joining Handal. Among others, he was the Auditor for Price Waterhouse (currently known as PricewaterhouseCoopers), Assistant Manager of Corporate Finance at Amanah Merchant Bank Berhad, Corporate Services Manager for ACP Industries Berhad and Special Assistant Corporate Finance of the President’s O�ce for Malaysian Resources Corporation Berhad as well as Chief Financial O�cer for Putera Capital Berhad

BusinessOverview

4

Handrill Sdn Bhd, a subsidiary company under the Handal Group, was incorporated on 11 January 2008 under the Compa-nies Act 1965 in Malaysia, to focusing on the business in the upstream oil and gas related activities especially in drilling, workover and drilling management.

The active involvement of Handrill in O&G begins in 2011 with registered license by Petronas, Handrill undertook a new business of fabrication of drilling rig, which is lightweight type and can be a modular, ideal for shallow and medium depth oil �eld exploration and extraction for o�shore and onshore.

Our �rst rig “Handal 1” which is being assembled at our Telok Kalong in 2013. The strength keys of this type of rig are the top drive, iron roughneck, and side track drilling capabilities of up to 12,000 feet. It is ideal for marginal oil �eld exploration and extraction due to their cost-e�ectiveness and deployment versatility.

Objective, Mission &

Vision

5

6

To provide quality service and products e�ectively and e�ciently, with compliance to the required standard through quality control in profes-sional and �exible environment for our customer's satisfaction and the same time striving to become a world - class organization.

- To commit in providing our client with high qualityservice and products.

- To create environmental - friendly and e�ective workingsurroundings company with excellent safety procedural.

- To commit building people to build the business.

To be premier safest global integrated solution provider for oil & gas and marine industries.

MISSION

OBJECTIVE

VISION

Health Safety &Enviroment

7

z e r 0ACC I D E N T

8

“Handrill Sdn. Bhd. policy is to strive for excellence in all its activity including

Health, Safety and environment (HSE) matters”

“Handrill is committed to give priority to HSE and take every reasonable and practicable step

to prevent, control and eliminate work that related to injury, illness, damage, to property and pollution

to the environment”“Handrill shall provide all necessary resources, organiza-

tion and training to all levels of sta� to ensure competent workforce in performing our Health, Safety and Environment

roles and responsibilities”“Handrill requires all its employees, who directly or indirectly to

strictly adhere to this policy at all times to achieves “zero” accident”

DRUG & ALCOHOL POLICY

Employees, supplier, contractor and other personnel who have alcohol and/or drug dependence should seek professional advice and appreciate treatment and/or

rehabilitation.Being at work whilst impaired by alcohol and/or drug shall be strictly prohibited. The

illicit use, possession, distribution, or sale of alcohol and /or drug within Company Work-Site or Premise shall strictly prohibit.

Company may, at any time, conduct unannounced searches for alcohol and drug on its work-site premises.

Company, at any time, reserves the right to request employees, suppliers, contractors and other personnel at its Work-Site or Premises to undergo for alcohol and/or drug test.

If the alcohol and/or drug test is positive, or if any employee, supplier and contractors is found to be in possession of, use or involve in tra�cking of alcohol and/or drug, such person shall be subjected to

disciplinary action, including termination of services and/or being reported to the relevant authority.All employees, supplier and contractors are responsible to ensure that their employees observe this policy.

H NII

Working Experience

Ahmad Mokri

Director, 56 Aged, Malaysian.

He holds the Diploma in Petroleum Engineering and joined Petronas as Drilling

Engineer in 1983. Has vast hands-on experience in the technical, operation and

management in aspect of drilling, work over, completion and well services. These

included operation planning and co-ordination, tender and contract

management. With these experiences and skills he held various positions in

Petronas such as Team Leader, Senior Drilling Engineer and Head of Drilling.

Between 1998 until now, he held various positions as CEO, General

Manager, Technical Advisor and Director in various companies that related

to Drilling and Work over operation locally and internationally.

Mohamad Hasni Mohd Said

Business Development Manager, aged 40, Malaysian

He holds the Executive Diploma in Industrial Technology Management with

more than 14 years experience in Oil and Gas industries.

Management skills obtained from direct involvements in offshore operation

including various platforms operations, refurbishes, mobilizations and stack

preparation of various rigs with number of contractors in Malaysia. Gained

a marketing and communication skills in various level of management locally

and internationally.

Mohd Ariffin Daud

Technical Advisor, Aged 60, Malaysian

He holds Bachelor in Petroleum & Natural Gas and started his career as Reservoir

Engineer with Exxon Mobil from1982 to 1983. From 1983 onwards, he had

assumed several position in Petronas Carigali such as Drilling Engineer,

Executive Kemaman Supply Base warehouse, Head of Procument (PMO),

Senior Engineer (Contract & Budget Division), Workover Manager, Drilling

Manager (Sudan Operation), Project Manager (Penara North Lukut Field),

Senior Manager (Sumandak Development

Project), Senior Manager (Pakistan Operations), Senior Manager (Drilling

Solution), General Manager (Sarawak Resources Management & Workover,

Production Enhancement and Well Integrity)

Aliff Aizat Ahmad

Technical Support Engineer , aged 26, Malaysian

He holds a BSc. Mechanical Engineering from Iowa State University, he started his career with

a local company namely, AceTimur Drilling whichis a kxal representative for COSL-Drilling

Private Limited (CDPL) in Malaysia. He participated with planning and execution of D-18 drilling

campaign(Baker-PCSB)with COSLBossJackupRigTeamasoperationsengineer,andleadafew

key equipment maintenanceandsafetyaudit projects for COSLBoss.He also involved directly

preparing tenders, invoices and technical clarification for Ace Timur.

' 9

Product & Services

Our integrated business model provides opportunity to cater complete supply chain management services as per below core competencies as follows:

•• Platform Drilling Unit/Light Weight Tender Drilling•• Land Drilling Unit•••••

10

StrategicPartners

With operations in more than 20 countries, Nabors is one of the world’s largest oil and gas drilling contractors.

Nabors Industries owns and operates the world’s largest land-based drilling rig �eet and is a leading provider of o�shore platform workover and drilling rigs in the U.S. and multiple international markets, including Asian region Countries such as Malaysia, Indonesia, Brunei and India. Nabors also provides innovative drilling technology, directional drilling operations and drilling instrumentation and software. Through its various subsidiaries, Nabors manufactures and sells top drives, catwalks, wrenches, drawworks and other drilling related equipment which are installed on both onshore and o�shore drilling rigs.

11

StrategicPartners

Atlantica Tender Drilling Ltd, formerly known as Bass Drill, the company incepted in 2007, to design, fabricate & operate safe & e�cient drilling equip-ment. While providing equipment that is speci�cally intended for the purpose it is used and meets the customer’s needs is their priority, it is only half the story. The Company �rmly believes that even quality hardware requires the right employee and management expertise and vision to back it up and get the job done e�ectively and reliably.

Atlantica’s rapid growth stems from meeting the speci�c needs of the oil companies and this is re�ected in long term contracts for both semi tenders Beta and Delta with top tier operators. Our highly competent and motivated teams have ready access to contemporary management systems. They are supported by a management leadership team which has set out core values for all its operations: safety, dependability, accountability, honesty, ethics, integ-rity, dignity, respect and personal development. To date current �eet, TAD Alpha, Beta, Gamma and Delta.

12

StrategicPartners

Founded in 1975, P.T. Lekom Maras o�ers mainly Hydraulic Workover Unit Services to cater Malaysia’s market. On top of that, the company also consult-ing and technical manpower services, and equipment supply. The company o�ers consulting personnel and engineering services, such as support fordrilling engineering, construction management, and logistics; quality assur-ance and quality control, including in-plant inspection and production control; non-destructive testing services, including radiographic, ultrasonic, magneticparticle, and similar testing; general oil�eld services, including general oil�eldsupport operations; oil recovery and produced water handling services; andtubular services, such as inspection and maintenance for drill pipe and oiltubular goods. The company serves oil and gas exploration and production,petrochemicals, mining, general manufacturing, real estate development, andtourism sectors. P.T. Lekom Maras was founded in 1975 and is based in Jakarta,Indonesia. As of August 13, 2008, P.T. Lekom Maras operates as a subsidiary ofRatu Prabu Energi Tbk.

13

Registrations & Licences

14

COMPANY'S NAME : HANDRILL SDN BHD (802490-W )

LICENSE NO : 802490-W

LICENSE PERIOD : 09.06.2015 - 08.06.2018

C A T E G O R I E S O F L I C E N S E / R E G I S T R A T I O NAPPROVED LICENSE CATEGORIES

L/R Service / Supplier Code Mode of Operation Principal Name(If Applicable)

Approval Date /Time

Expiry Date

L SP2010102PRODUCTION/DRILLING/WORKOVER ASSOCIATED SERVICES-DRILLINGRIGS-OFFSHORE RIG-TENDER ASSISTED

RIG OPERATOR ATLANTICA TENDER DRILLING LTD 12.06.201508:32:30

08.06.2018

L SP2010104PRODUCTION/DRILLING/WORKOVER ASSOCIATED SERVICES-DRILLINGRIGS-OFFSHORE RIG-SELF CONTAINED/PLATFORM RIG SERVICES

RIG OWNER-OPERATOR NOT APPLICABLE 09.06.201519:37:29

08.06.2018

L SP2010201PRODUCTION/DRILLING/WORKOVER ASSOCIATED SERVICES-DRILLINGRIGS-ONSHORE RIG-LAND OILFIELD RIG SERVICES

RIG OWNER-OPERATOR NOT APPLICABLE 09.06.201519:37:29

08.06.2018

L SP2030100PRODUCTION/DRILLING/WORKOVER ASSOCIATED SERVICES-DEDICATEDWORKOVER SERVICES-HYDRAULIC WORKOVER UNIT (HWU)/ WPRKOVERPULIING UNIT(WPU)& SERVICES

RIG OWNER-OPERATOR NOT APPLICABLE 15.01.201616:24:26

08.06.2018

L SP2030300PRODUCTION/DRILLING/WORKOVER ASSOCIATED SERVICES-DEDICATEDWORKOVER SERVICES-CONVENTIONAL WORKOVER RIG

SELF-OPERATED NOT APPLICABLE 09.06.201519:37:28

08.06.2018

L SP2120000PRODUCTION/DRILLING/WORKOVER ASSOCIATED SERVICES-WELLABANDOMENT

SELF-OPERATED NOT APPLICABLE 07.09.201612:07:11

08.06.2018

L SP2220300PRODUCTION/DRILLING/WORKOVER ASSOCIATED SERVICES-WELLPERFORATION EQUIPMENT & SERVICES-SLICKLINE WELL PERFORATINGSERVICES

SELF-OPERATED NOT APPLICABLE 01.07.201614:43:30

08.06.2018

PRODUCT/SERVICE TO EXPLORATION AND

Registrations & Licences

15

LICENSE TO SUPPLY OIL/GAS COMPANIES IN MALAYSIA

16

HANDRILL-RIG & FLEET STATUS

DISCLAIMER: All equipment , specification and data are subject to change without prior notice to improve reliability, function or otherwise as per contract requirements.

Year Built

Company/Principle

Unit Name Client Scope of Services Start Date

Completion Date

Status

2009 Atlantica Tender Drilling

Ltd

TAD -Alpha

TOTAL Drilling Services - Congo Q4 - 2011 Q2 - 2015 Available.

Congo.

2010 Atlantica Tender Drilling

Ltd

TAD - Beta

Petrobras Drilling Services – Surface Development – Campos Basin – Papa Terra TLP

Q2 - 2014 Q2 - 2018 Ongoing operation

2013 Atlantica Tender Drilling

Ltd

TAD – Delta

TOTAL Drilling Services – TLP Development Offshore Congo – Moho Nord

Q1 – 2016 Q3 - 2019 Ongoing operation

2011

Handrill Sdn Bhd Handal-1

Conventional Workover Rig (CWR). Unit assembled at Telok Kalong Yard.

Stacked and available.

Telok Kalong Yard

2015

Handrill Sdn Bhd

Handal AHWU-1

Advance Hydraulic Workover Unit.

Participated in ITB – PTTEPI,

Myanmar Assets.

Under Construction- available by end of Q4 2018

Refurb.2013 Nabors P453

ExxonMobil Malaysia

Workover Services – Tapis Field. Q4-2013 Q3-2016 Available.

KSB Yard

Refurb. 2002

Nabors P488

ExxonMobil Malaysia

Workover Services – Tapis Field Q2-2011 Q1-2013 Available

KSB Yard

HANDAL-1Elevation & Specs

17

MAST • 106 feet, 650 kips/ 10 line strung, DSII Boot-Strap Mast

SUBSTRUCTURE • 30 feet, 550 kips casing load, 350 kips setback load, DSII boxon box

TRAVELLING BLOCK • American Block, Model B42E350, max rated load 350 ton,Sheave diameter 42”, sheave 1-1/4”

DRAWWORKS • National 80UE, rating 1000 HP (optional 1500), drilling line 1-1/4 in, auxiliary brake Wichita 236

ROTARY TABLE • Table opening 27-1/2 in, Brand IDECO RK

TOP DRIVE • Model 6027AC-939, rating 275 ton

IRON ROUGHNECK

• Voss Floor Hand Model 9GF 1100• Make-up torque: 65000 ft lbs• Break-out torque: 80000 ft lbs• Max horizontal travel: 99.5”• Max vertical travel: 36”• Weight: 7220 lbs

BOP

• Remote controlled• 13-5/8 5M in Cameron type U single Ram• 13-5/8 5M in Cameron type U double Ram (lower shear ram)• 13-5/8 5M in Hydril type GK Screw Head Annular

CIRCULATING SYSTEM • Two(2) x 200 Bbl Mix/Active Tanks• One(1) x 200 Bbl Sand-Trap/Shaker Tank• One(1) x 150 Bbl Trip Tank

MUD PUMPS • Two(2) American Block K1000 triplex mud pumps, driven by750 VDC electric traction motor

SCR DRIVE GROUP

• Three(3) x 1000-1250 KW diesel engines• 1000-1500 KW generators• 3 phase 600 V• 60 Hz motor frequency, 1200 RPM

SCR SYSTEM

• GPS system• Three(3) x 750 V Direct current, 1600 A electric current SCR

converter cubicles• 600 V Feeder Section• One(1) 1200 AF/1200 AT top drive feeder breaker• One(1) 1000AF/1000AT 600V MCC XFR Feeder• One(1) 150 AF/Lighting Transformer Feeder Circuit Breaker, 42

KIA rated

ACCUMULATOR UNIT • Five(5) stations, 16 bottles accumulator systems with a 200

gallon reservoir• Two(2) x 120 ft remote control

CHOKE MANIFOLDS • Ten(10) x 5000 psi (3” x 2”) valve• One (1) manual and one (1) hydraulic choke manifold w/gas

buster.

MAIN CRANE • Seacrane R550-100

DRILL PIPE • 5" OD Drill Pipe with length 9000ft, Grade S135, 19.50ppf• 4" OD Drill Pipe with length 3000ft, High Torque, 14.40ppf

DEPTH RATING • 12000 FT

18

1

DISCLAIMER: All equipment , specification and data are subject to change without prior notice to improve reliability, function or otherwise as per contract requirements.

Nabors – Unit Specifications

RIG NO/ NAME P453 P488 HORSE POWER (HP) 1000 750

MAST DRECO POOL TYPE Telescoping Telescoping HEIGHT (ft) 133 131 HOOKLOAD (lbs) 428,000 400,000 SUBSTRUCTURE POOL POOL TYPE Cantilever Tank/Box Structure HEIGHT (ft) 23’ 24’ CASING LOAD (lbs) 320,000 300,000 SETBACK LOAD (lbs) 260,000 200,000 DRAWWORKS DRECO DRECO RATING 1000 1000 DRILLING LINE 1-1/8” 1-1/8”AUXILIARY BRAKE Baylor 19RD Baylor 7RD150 ROTARY TABLE GARDNER DENVER GARDNER DENVER TABLE OPENING (in) 27-1/2 27-1/2TOP DRIVE VARCO - RATING (tons) 250 DRIVE GROUP SCR SCR

(4) x 3412 CAT Kato Generator4 Bay Ross Hill SCR

4 X 3412 CAT Kato Generator 4 X CAT SR-4 Generator

IEC 4 Bay SCR

MUD PUMPS GARDNER DENVER SPM 2 x PZ9-1000hp, w/1 G.E752 DC Motor 1 TWS – 600hp Triplex w/1 G.E752 DC

Motor 1 PZ-8 w/G.E 752 AC Motor

ACCOMODATION NIL Tool Pusher Office 2- Man Sleeper

DEPTH RATING 12,000 ft with 3-1/2” Drill Pipe 10,000 ft with 3-1/2” Drill Pipe

20

HANDRILL - TENDER ASSISTED DRILLING RIG

SPECIFICATION

Tender Assisted Drilling - DELTA

Design: Bassoe Technology, Sweden

Classification: ABS +A1 Column Stabilized Drlg Tender

Flag: Panama

Operational Displacement: 22,440 MT

Total Operational Payload: @operational draft 5,000 MT

Deck Area: 1,765 m2 open on Main Deck (incl. Pipe Rack) 300 m2 open on Sack Store Roof

Pipe Rack: 756 m²

Transit Draft: 8.30 m

Survival Draft: 13.15 m

Operational Draft: 16.65 m / 15 mts for Moho Nord project

Ht, Baseline to Box Btm: 25.35 m

Ht, Baseline to Upper Deck: 31.85 m

Length Overall: 83.0 m

Overall Breadth: 77.4 m

Beam Outside Pontoons: 61.1 m

Length of Pontoons: 76.7 m

Beam of Pontoons: 13.7 m

Height of Pontoons: 8.45 m

Column Size: 12.35 m x 13.65 m

Diameter of Bracing: 2.0 m

Quarters Capacity: 170 beds / 10 single rooms & 80 double rooms

Helideck: Sikorsky S61N / S92N

Mooring Winches:

4 ea. Skagit AC double drum traction winch, 496kip pull cap., Each c/w 1,750m x 80 mm wire 8 ea. Skagit storage winches

Anchors: 2 x 12 MT Stevepris MK6

Hawser Winches: 4 ea. Skagit hydraulic drum winch, 560kip pull cap. Each c/w 120m x 76mm wire

2

HANDRILL- TENDER ASSISTED DRILLING RIG

SPECIFICATION

Drilling Equipment

Mast Rating: 1,000 kip Static Hook Load

Mast Capacity: 32,270 ft (9,836m) of 5-7/8” Drill Pipe/Collars

Mast: Hydraulically Raised Telescoping Cantilever

Mast Height: 152 ft Clear Height

Substructure: Open truss type w/ 13m CWH under strongbacks

Substructure Capacity: 1,000 kip SHL + 1,000 kip setback (or) 750 kip dynamic setback

Skidding System: Lift & Roll Systems, X-Y direction

Drawworks: Cameron Model LDW 1000k, 3000 hp AC

Rotary Table: Hydraulic, Cameron LH605, 60-1/2” x 150 HP

Top Drive: NOV TDS-8SA 750 ton w/ Soft Speed system

Traveling Block: 500 ton, 6 Sheaves

Drillers Cabin: Cameron, Enclosed & Climate Controlled

Power Slips: Blohm & Voss PS 500

Casing Stabbing: MAXRIG CSA 30 Mechanized Arm

Make up/Break out: Forum WR120 Mech. Roughneck + Drilco EZ Torq Hydraulic Catheads

Handling Tools: Complete Set for Drill String

Off Line System: Forum 12kip capacity Bridge Crane + WR80 Mech. Roughneck

Mechanized Catwalk: Mechanized Catwalk for Risers

• Storage Capacities

Liquid Mud System: upperhull 7,208 bbls in vessel deckbox

Liquid Mud System: in pontoons 2,800 bbls in vessel pontoons

Liquid Mud System: MEP 340 bbls in Substructure & Trip Tanks

Trip Tanks: 2 x 50 bbls

Brine/Base Oil: 1,000-1,000 bbls in vessel pontoons

Drill Water: 13,400 bbls

Potable Water: 4,480 bbls

2

HANDRILL - TENDER ASSISTED DRILLING RIG

SPECIFICATION

Bulk Volume: 20,800 ft3

Sack Storage: 232 m2 under cover c/w bridge crane access

• Mud System

Mud Pumps: 3 x Cameron 2214, 2,200 hp x 7,500 psi

Shale Shakers: 3 x MiSwaco MD-3

Solids Control: 1 x MiSwaco MD-3 Mud Cleaner

Degasser: 1 x MiSwaco CD-1400, 1,300 gpm

• Power Equipment

Main Engines: 6 x CAT C175-16, 1,200 rpm x 1,833 kW MCR

Main Generators: 6 x ABB, 60 Hz, 690V

Emergency Engine: 1 x CAT 3512-C, 1,800 rpm x 1,180 kW MCR

Emergency Generator: 1 x ABB, 60 Hz, 480V

• BOP Equipment

BOP #1: Cameron, 16-3/4” 5M annular, 5M double + single

BOP #2: Cameron, 13-5/8” 5M annular, 10M double + single

Choke Manifold: Cameron, 3” x 2” x 10M w/ Hyd & Man Chokes

BOP Control: Cameron, 11 stations c/w Driller + 2 Remote Panels

BOP Testing: Cameron, 10M BOP Testing Unit

BOP Parking: 2 ea. Parking / testing locations in Substructure

BOP Handling: 2 ea. Independent bridge ea. w/2 ea. 25 ton pneumatic chain hoist

Mud Gas Separator: ASME vessel, 1,500gpm liquid capacity

• Material Handling and Cranes

Main Crane: Seatrax S126 Starboard Aft, 64 m max radius

Capacity: 171 MT at 40 m radius, 6-part, offboard to platform

Aux Crane: Seatrax S72 Port Aft, 44m max radius

Capacity: 16 MT at 37 m radius, offboard to vessel

Platform Access: Marine Aluminum telescopic bridge at Aft w/ mech. luff & slew, 38m length +/- 7.5m stroke

Tubular Handling: Hi-line Transfer System

23

Auxiliary Wellbay Hoisting: 2 ea. Knuckle Boom Cranes in Substructure

• Drill String

Drill Pipe: 5-7/8” VAM and 4” VAM

HWDP: 300 m of 5-7/8”

Drill Collars: 30 x 6-1/2”, 30 x 8-1/4”, 12 x 9-1/2”, 18 x 4-3/4”

Pup Joints & Subs 1 lot for Contractors String

Handling Tools 1 lot for Contractors String

Fishing Tools: 1 lot for Contractors String

• Unique Features & Information

Rig Package Weights: 160 mt or less

Total Dead Weight: 1,300 mt for Mast/Sub

Substructure Foot Print: 116 ft x 67 ft (35.4m x 20.5m)

• Safety & Life Saving

Life Saving Primary: 4 x 85 man Davit Launch Life Boats

Life Saving Secondary: 4 x 25 man & 2 x 35 man Inflatable Davit Launch Life Rafts

Life Saving Secondary: 1 x Fast Rescue Craft

Fire & Gas Detection: In accordance w/ Class

Fire Suppression: In accordance w/ Class

Medical Clinic: Furnished for 170 POB

SSZ

DELTA Tender Assisted Drilling Rig

Elevation & Specs

MTB DESIGN SUPERIORITY The Tender Barges:

� Anchor Once – A design which allows the barge to be positioned once and commence operations in a fraction of the time in comparison to existing units.

� Double Hull Bottom and Side – � Reduced Rig-up Time – � Safety Culture – everyone is encouraged to use their authority to stop unsafe operations � An efficient vessel and rig configuration specifically designed for moderate depth drilling on platforms � A mast / substructure packaged into lifts of 30 MT or less which permits sage assembly or disassembly

in a broader weather window � Efficient AC technology with better control, light equipment weight, enhanced fuel consumption &

lower emissions � A seasoned management team who have a formidable history in the design, fabrication and operation

of modular platform drilling units � A close working relationship with Bassoe Offshore A/S who have a well-respected record of

establishing successful drilling contractors � A well trained and motivated team who will be compensated according to their levels of competency

and training � A safety culture whereby anyone associated with our operation has the ability to suspend operations

if they are uncomfortable or feel that too great a hazard exists. The will be fully supported by management for their efforts afterwards.

� The design incorporates the latest changes and updates in vessel and drilling system design rules and regulations including those of ABS, IMO and API.

ALPHA Medium Tender Barge (MTB)

2

SpecificationsMedium Tender Barge (MTB)

noitpircseD dezirammuS Power Equipment Design: Bassoe Technology AB Main Engines: 4 x Caterpillar 3516B 1,901 Bkw

remoS yoreL x 4 :srotareneG niaM egraB 1A+ SBA :noitacifissalC 60Hz, 600v 1 :enignE ybdnatS amanaP :galF x Caterpillar 3412 TA 620 Bkw

pretaC x 1 :rotareneG ybdnatS TM 852,8 :tnemecalpsiD gnitarepO illar SR4 60 Hz 480v tfarD gniltnacS ta TM 686,4 :daoL elbairaV latoT

m 3.38 :htgneL llarevO BOP Equipment etreviD m 7.22 :htdaerB llarevO r Assy: T3 21-1/4 2M, 12” valves & lines

M5 ”8/5-31 3T :POB ralunnA m 06.7 :kceD niaM ot htpeD :POB maR m 05.4 :thguarD ngiseD T3 13-5/8” 5M 3 Rams & Shears

tuA htiw M5 ”3 3T :dlofinaM ekohC m 002 :htpeD retaW gnitarepO o & Manual Chokes Main Deck Area: 780 m2 etomeR & lenaP lortnoC ,noitatS 8 3T :rotalumuccA Hull: Double bottom & sides BOPE Handling: Twin Trolley, Hydraulic Hoist Unit Quarters Capacity: 112 P snibac deb 2 ni snosre

N29S yksrokiS :kcedileH Cranes Mooring Winches: Skagit 4 x AC Double Drum 2.5” wire Main Crane: Seatrax S9022 Kingpost Marine Crane Anchors: 8 x 6 ton Stevepris MK6 Capacity: 35 MT at 25m Radius, offboard to platform

enarC eniraM tsopgniK 6184S xartaeS :enarC xuADrilling Equipment Capacity: 5 MT at 20m Radius, offboard to vessel

Mast Rating: 700 kip Static Hook Load Platform Access: Forum Personal Access Ramp (PAR) Mast Capacity: 17,000 ft of 5” Drill Pipe / Collars Tubular Handling: Hi-Line Tubular Transfer System Mast Make: Woolslayer Boot Strap, Self-Erecting Mast Height: 140 ft Clear Working Height Drill String Substructure: Woolslayer Box-on-box type Range 2 Drill Pipe: 6,500 ft (1,981 m) x 5” S-135 Substructure Capacity: 440 kip setback simultaneous with hookload Range 2 Drill Pipe: 8,200 ft (2,500 m) x 3-1/2” S-135 Skidding System: Lift & Roll Systems, X-Y Range 2 Heavy Weight: 30 ea 5” Drawworks: LTI LDW-750k 1500HP, AC Range 2 Heavy Weight: 30 ea 3-1/2” Rotary Table: LTI L-37.5” x 100 hp Hydraulic Drive Range 2 Drill Collars: 6 ea 8” Spiral Top Drive: NOV TDS11SA 500 MT Range 2 Drill Collars: 15 ea 6-3/4” Spiral Traveling Block: LTI 350 ton, 6 s :sralloC llirD 2 egnaR evaeh 18 ea 4-3/4” SpiralDriller’s Cabin: Enclosed, Climate Controlled Pub Joints & Subs: 1 lot for Contractors String Power Slips: B&V PS500 GSC & PD /f spilSCasing Stabbing: ODS Intl PSA-322 Mechanized Arm Unique Features & Information Make up / Break out: B&V Grey 9400 Floorhand Rig Package Weights: 30 mt or less Handling Tools: 1 lot for Contractors String Total Dead Weight: 650 mt for MEP Fishing Tools: 1 lot for Contractors String Substructure Footprint: 30 ft x 42 ft (9.1 m x 12.8 m)

buS no kceD epiP gnigatS :klawtaC detavelEStorage Capacities Elevated Walkway: Safety Walkway Starboard Side

egraB no slbb 0053 :metsyS duM diuqiLLiquid Mud System: 180 bbls in Substructure Safety & Life Saving

aS efiL slbb 05 x 2 :sknaT pirT ving Primary: 2 x 112 man Davit Launch Life Boats efiL slbb 0091 :liO esaB / enirB Saving Secondary: 10 x 25 man Inflatable Life Rafts

ivaS efiL slbb 0007 :retaW llirD ng Secondary: 1 x Fast Rescue Inflatable Craft S slbb 0541 :retaW elbatoP cramble Nets: 2 x 60 ft

aG & eriF slbb 0042 :leuF leseiD s Detection: In accordance w/class eriF tf uc 0008 :emuloV kluB Suppression: In accordance w/class

lacideM xs 0043 :egarotS kcaS Clinic: Furnished for 112 POB

Mud System m5 x ph 0031 ,2131HW ITL x 3 :spmuP duM

Shale Shakers: 3 x M esoognoM TP ocawSiDegasser: MiSwaco Vacu mpg 0001 ,epyT mu

25

THE BT-3500 DESIGN SUPERIORITY The first new Semi-tender design in over a decade is specifically designed to bring Tender Assisted Drilling to new regions and environmental conditions.

� Higher columns combined with Deeper Operational Draft provide a larger air gap and a more stable platform.

� Improved hydrodynamic performance allows the BT-3500 to work in waters too harsh for the present fleet of Tender Drilling Units.

� The design incorporates the latest changes and updates in vessel and drilling system design rules and regulations including those of ABS, IMO and API.

� With the largest crane of any Semi-Tender, the BT-3500 can operate on SPARs and TLPs other Semi-Tender rigs cannot reach and provides a much greater stand-off distance during rig-up / rig-down and drilling operations.

� The BT-3500 is the first Tender Drilling Unit with a Mast Equipment Package (MEP) specifically designed for the dynamic loads of floating platforms.

� Higher variable deck load (VDL), increase fluids, and power capacity, as well as increased bulk, fluids, and power capacity, as well as increased hookload (1,300 lips static) mean deeper drilling capacity.

� A self-propelled option is available with low voltage thrusters for ultra-fine positioning alongside platforms and weather avoidance.

Elevation & Specs BETA Semi Tender

2

MCM-2-BRO-008.2, Rev 0-C

SpecificationsBT-3500 Semi-Tender

noitpircseD dezirammuS Mud System Design: Bassoe Technology AB Mud Pumps: 3 x 2,000 hp x 7500 psi fluid ends

S elahS m 0.38 :llarevO htgneL hakers: 4 x Swaco PT Mongoose + 1Mud Cleaner uC m 4.77 :htdaerB llarevO ttings Dryer 1 x Swaco Verti-G

815 ocawS x 2 egufirtneC m 1.16 :snootnoP edistuO maeBg 0031 ,0041-DC ocawS :ressageD m 7.42 mtB xoB ot enilesaB ,tH pm

m 2.13 :D/U ot enilesaB ,tHMain Deck Area: 3,000 m2 Power Generation Pipe Rack: 900 m2 wkB 109,1 B615,3 rallipretaC x 6 :senignE niaM

G niaM TM 067,5 :daolyaP PO latoT enerators: 6 x Leroy Somer 60Hz, 600v Classification: ABS +A1 Column Stabilized Drlg Tender Standby Engine: 1 x Caterpillar 3412 TA 620 Bkw

v084 zH 06 4RS rallipretaC x 1 :rotareneG ybdnatS amanaP :galF m 1.47 :snootnoP fo htgneL m 7.31 :snootnoP fo maeB BOP Equipment

lav ”21 ,M2 ”¼ 12 3T :yssA retreviD m 08.7 :snootnoP fo thgieH ves & lines Column Size: 12.4 m x 13.7 m M5 ”¾ 81 3T :POB ralunnA

maR m 0.2 :gnicarB fo retemaiD BOP: T3 18 ¾” 10M 3 Rams & Shears dyH htiw M01 x ”3 x ”4 3T :dlofinaM ekohC m 5.7 :tfarD tisnarT & Man Choke

talumuccA m 5.21 :tfarD lavivruS or: T3 8 Station, Control Panel & Remote POB m 0.61 :tfarD lanoitarepO E Handling: Twin Overhead Mech. Hoist Units

Operational Displa TM 057,02 :tnemecQuarters Capacity: 140 Persons in 2 Bed Cabins Cranes Helideck: Sikorsky S61N / S92N Main Cranes: Seatrax S126 Starboard Aft Mooring Winches: Skagit 4 x AC Double Drum 80mm wire Capacity: 171 MT at 34m radius, offboard to platform

al-erp rof smurd ”kcab dloh“ .ae 2 ids Aux Cranes: Seatrax S72 Port Mid Ship Anchors: 8 x 12 ton Stevepris MK6 Capacity: 16 MT at 37 m radius, offboard to vessel

wels & fful .hcem /w egdirb cipocseleT :sseccA mroftalPDrilling Equipment Tubular Handling Hi-Line Transfer System

Mast Rating: 1,300 ki daoL kooH citatS pMast Capacity: 43,000 ft of 5 7/8” Drill Pipe / Collars Drilling String Mast Make: Boot Strap, Self-Erecting (quad / treble) Drill Pipe: 6,000 m of 5 7/8” Mast Height: 182 ft Clear Height (152 ft optional) HWDP: 300 m of 5 7/8”

gnaR epyt xob-no-xoB :erutcurtsbuS e 2 Drill Collars: 30 x 6 ¾”, 24 x 8”, & 15 x 9 ½” spiral Substructure Capacity: Rig floor 1267 kip setback Pup Joints & Subs: 1 lot for Contractors String Skidding System: Lift & Roll Systems, X-Y Handling Tools: 1 lot for Contractors String

T gnihsiF CA ,ph 000,3 :skrowwarD ools: 1 lot for Contractors String Rotary Table: 49.5” x 100 hp )1 noitpo( evirD dyH Top Drive: NOV TDS8SA 750 ton Environmental Conditions Traveling Block: 650 ton, 6 s lavivruS noitarepO evaeh

21 m 0.61 :tfarD dellortnoC etamilC ,desolcnE :nibaC s’rellirD .5 m Power Slips: B&V PS750-2 Slips f/ 3 s/m 32 :deepS dniW GSC & PD 1 m/s Casing Stabbing: OTG w/ 2 7/8” – 22” range Max Wave Height Hs: 8.4 m 15.2 m Make up / Break out: Forum wr 120 3 ½” to 10” Sign Wave Height Hs: 4.5 m 8.0 m Handling Tools: Complete Set for Drill String Average Wave Period Tz: 7.2 – 9.8 s 10.3 s Off Line System: Mech. Roughneck & Bridge Crane Current Speed: 1.0 m/s 1.26 m/s

)lanoitpo( GSC/PD rof mrA .hceM :mrA gniliaTMechanized Catwalk: Mech. Vdoor for DP/CSG (optional) Storage Capacities

xobkced VST ni slbb 042,7 :metsyS duM diuqiLSafety & Life Saving Liquid Mud System: 0 – 2,800 bbls TSV pontoons

Life Saving Primary: 4 x 70 man Davit Launch Life Boats Liquid Mud System: 180 bbls in Substructure & Trip Tanks Life Saving Secondary: 14 x 25 man Inflatable Life Rafts Trip Tanks: 2 x 50 bbls Life Saving Secondary: 1 x Fast Rescue Inflatable Craft Brine / Base Oil: 2,000 bbls Scramble Nets: In accordance w/ class Drill Water: 13,650 bbls Fire & Gas Detection: In accordance w/ class Potable Water: 2,230 bbls Fire Suppression: In accordance w/ class Diesel Fuel: 9,600 bbls Medical Clinic: Furnished for 140 POB Bulk Volume: 20,800 cu ft

xs 005,5 :egarotS kcaS

2

28

DISCLAIMER: All equipment , specification and data are subject to change without prior notice to improve reliability, function or otherwise as per contract requirements.

GENERAL Name Handal AHWU - 1 Design CEEM Built Year 2015 Modi�cation N/A, New Build Construction Yard UAE Type Modular Pulling Capacity 460,000 lbs Snubbing Capacity 230,000lbs Hydraulic Jack 210 ton, Capacity 10ft travel Through Bore 14” Wind Speed 69 knots Double Racking System

Yes, 3500M of 5” DP

MAIN EQUIPMENT DIMENSION Total Weight 460K AHRU Unit Assembly

37,550kg

Hydraulic Jack 10,650 Kg (6’ X 6’ X 14.5’) Skidding Frame 25,000 kg (11.5’X11.5’X26’) Work Window 5,900kg ( 5’ X 5’ X 10) Work Basket 4650kg, (20’X 15’X 6.5’

MUD SYSTEM Mud Pump 2 X DEMAY HD500, 4 ½” 10K

Fluid end- Complete Zone II ATEX Rated.

High Pressure Pumping Line

2 “ fig. 1502 connection 5,000 psi WP

Shale Shakers 1 x DFE, Screen 120 micron Degasser Baffle Type API Certified Mud Tank 3 x 125 bbl.

c/w transfer pump Circulation Tank 1 x 125 bbl. Mixing Tank 1 x 50 bbl Trip Tank 1 x 50 bbl.

c/w transfer pump

WELL CONTROL BOP Shaffer, 13-5/8”

5,000 psi BOP Annular Shaffer, 13-5/8” 5,000 psi WP

Choke & Kill Manifold 5,000 psi Choke & Kill Type FC Valve Manifold

Diverter / Mud Cross 13-5/8” 5,000 psi WPRiser Spool 13-5/8” 5,000 psi Length: 15ftBell Nipple 13-5/8” BX160 connection

Outlet 2”, 4” and 6”Accumulator Unit 270 Gal. tank reservoir, BOPC,

3,000 psi WP

TUBULAR Drill Pipe 410 jts, 3-1/2” 13.30ppf grade

S135, NC 38, OD 5” & ID 2 9/16”

HWDP 45jts, 3-1/2” NC 38 Pup Joint 3 X 5ft

3 X 10ft 3 X 15ft

POWER UNIT Power Pack 2 x CAT C18

2100 RPM, 715 HP, Zone II certified

Generator 2 x Cat 3406C 490 HP, Zone II certified

Air Compressor 2 x Diesel Engine Driven 375 cfm, Zone II certified

TUBULAR HANDLING EQUIPMENT Rotary Table 14”Thru Bore,

22,000ft/lbs,136 RPM CEEM Rotary Table

Power Tong 2 x Eckel 5-1/2 HSVS Model B Max. Torque 22,000 ft.lbs

Manual Tong 2 x HT35 2-3/8” to 10-3/4” Max. Torque 32,000 ft.lbs

Slip 4 x Cavin Slips Model C 1.315” to 5-1/2” Max. Load 250,000 lbs. 2 x Cavin Slips Model F 2-3/8” to 8-5/8” Max. Load 400,000 lbs.2 x CEEM slip Max Load 500000lbs

Gin Pole SWL 10.0 MT 53.0 – 72.0 ft. (fully extended).

Counter Balance CEEM 460K Counter Balance system

HANDRILL AHWU - 1 SPECIFICATION

Accelerating Our Pace

Corporate O�ce

HANDRILL SDN. BHD.(802490-W)

16C, Jalan 51A/225, 46100 Petaling Jaya, SelangorTel: +603 7875 0150Fax: +603 7876 6394

Operational O�ce

Yard 1

Lot PT 7358, Kawasan Perindustrial Teluk Kalong, Mukim Telok Kalong 24007 Kemaman, Terengganu Darul Iman, Malaysia.

Tel: +609 860 2000Fax: +609 8602197

Yard 2

4, Kawasan Lapang Fasa I IKemaman Supply Base

24007 KemamanTerengganu, MalaysiaTel : +609 - 863 2842Fax : +609 - 863 2843

Yard 3

Lot 19 Kawasan Industri Kecil & Sederhana.Jalan Ranca-Ranca,

87025 Wilayah Persekutuan Labuan.

www.handalresources.com.my