great britain and ireland€¦ · matt knight, automation engineer arburg ltd warwick arburg ltd...

2020

GREAT BRITAIN AND IRELAND

3

Introduction

Dear Customer,The trademark of the ARBURG ALLROUNDER is its versatility

and flexibility. It is important therefore that you, the end user,

should be able to obtain a full understanding and appreciation

of its full capability.

For this particular reason ARBURG Ltd have put together this booklet to offer you

and your technicians the possibility of participating in training courses which will

enable you to acquire all the skills required to work with the ALLROUNDER range

of injection moulding machines.

Contained within this booklet is the current ARBURG training programme subdi-

vided into different courses according to your specific requirements. These courses

cover a wide cross section of disciplines from the general practice of injection

moulding through to in depth theoretical and ‘hands on’ training on the ma-

chines.

Should you have questions or require any further information please do not

hesitate to contact us.

Yours faithfully

Colin Tirel

Managing Director

ARBURG LIMITED

4

Courses are arranged according

to demand. Please E-Mail your request

to [email protected] or telephone

01926 457000

Times and Duration

for courses at Warwick:

Day 1: 9.30–16.30

Day 2: 9.30–16.30

Times and Duration for courses at

customer’s premises:

Dependant on course and location.

Costs:

Two day course at ARBURG Ltd

£ 400.00 per delegate & VAT subject

to a minimum of 3 attendees.

Three day course at ARBURG Ltd.

£ 600.00 per delegate & VAT.

Included in the price is a detailed course

book, lunch and beverage subject to a

minimum of 3 attendees.

Two day course conducted at customer

premises in Wales and England £

1350.00 per course & VAT.

Three day courses at customer site

from £2000

Training courses conducted at cus-

tomer premises in Ireland and Scotland

prices upon request. Course enquiries

are also possible via our website.

Note:

All courses are available subject to

machine availability and a minimum

number of participants having regis-

tered.

Should you require advice on the suit-

ability of courses for your requirements

please contact either Mr. R Hambrook

(Service Manager) or Mr. Derek

Cheetham (Applications Engineer).

General course enquiries should be

made to Donna White.

All enquiries regarding training at

customer premises should be made to

Mr. R Hambrook.

Special bespoke machine training

courses or information seminars can

be arranged for individual customers

at our facility at a cost of £ 650 per

day irrespective of number of person-

nel but a maximum of 6 is recom-

mended.

Worldwide standards:

ARBURG places high demands on its

trainers. All our courses are carried

out according to a unified standard

worldwide.

General Information

5

Accommodation:

We have listed for your information

a list of local hotels and contact

telephone/fax numbers.:

It is the customer’s responsibility to

arrange their accommodation and the

payment of same.

In the case of late bookings we can of

course assist with hotel booking but

on the strict understanding that hotel

costs will be settled by the customer

on departure.

The Falstaff, Leamington Spa

Approx. 2 miles from ARBURG Ltd

Tel.: 01926 312044

Fax: 01926 450574

The Holiday Inn Express,

Warwick


Reservations: 0800 897121

The Angel, Leamington Spa


Tel.: 01926 881296

Premier Inn, Leamington Spa

Approx. 2 miles from ARBURG Ltd.

Tel.: 0044 8715279380

Travelodge, Leamington Spa

Approx. 2 miles from ARBURG Ltd.

Tel.: 0044 8719846239

Local Hotel Information

6

Spares Department: 01926 457021

Darren Hunt, Spares

Service Department: 01926 457031

Robin Hambrook, Service Manager

Roger Talbot, Service Controller

Kim Sharpe, Internal Engineer

Stephen Redman-Windsor,

Service Contract and Support

General: 01926 457000

Colin Tirel, Managing Director

Louise Horne, Finance Controller

Donna White, PA to the directors

Derek Cheetham, Applications Eng.

Matt Knight, Automation Engineer

ARBURG Ltd Warwick

ARBURG Ltd

Tachbrook Park Drive

Warwick CV34 6RH

Tel.: 01926 457000

Fax: 01926 457030

www.arburg.co.uk

E-Mail: [email protected]

[email protected]

[email protected]

ARBURG Ltd

Sales Department:

01926 457001

Simon Wrighton, Sales Director

David Kenny, New M/C Sales

Vince Crossan, New M/C Sales

Training Place/Address/Contact List

7

Basic courses p. 10

Introductory course on machine operation

Machine adjustment courses p. 11

Main course on machine adjustment and

programming

Service training p. 12-13

Electrical and hydraulic machine appreciation course

Plastics technology course p. 14

Clamp and injection data considerations and

applications

Information seminar p. 15

One-day seminars on the SELOGICA control and

ARBURG ALS host computer system

Courses on robotic systems p. 16

Six-axis robotic systems, MULTILIFT V /

MULTILIFT SELECT, MULTILIFT H

G

M

SC

KT

I

HP

We are also pleased to offer individualised courses upon request, with customer-specific content. These courses can be held either at your premises or at ARBURG.

Machine

Service

One-day seminar

Technology

Automation

Overview Courses

8

Course objective: Basic principles of injection moulding machines

and control systems

Target group: Those new to the injection moulding sector,

machine operators

Prerequisites: No previous knowledge required

Course duration: 2 days

Course fee: £ 400.00

Documents: Course folder with accompanying texts and CD

Note: To enhance your knowledge, we also recommend participation in the

machine adjustment courses

G Basic courses

Machine Control Code

ALLROUNDER A SELOGICA direct G-A d

ALLROUNDER E SELOGICA direct G-E

ALLROUNDER H SELOGICA direct G-H

ALLROUNDER GE SELOGICA direct G-GE

ALLROUNDER S SELOGICA direct G-S

Course content

• Design of the injection moulding machine

• Injection moulding process

• Basic principles of the control system and the control panels

• Typical plastics processing requirements

• Practical situations: starting / ending the injection moulding

process, troubleshooting / fault remedy, mould changes, changing

the moulding material with cylinder and screw cleaning

• Machine maintenance

Course description

9

Course objective: Adjustment an injection moulding

machine independently

Target group: Installation technicians, machine operator

Prerequisites: Basic knowledge of injection moulding




MMachine adjustment courses


ALLROUNDER A SELOGICA direct M-A d

ALLROUNDER E SELOGICA direct M-E

ALLROUNDER H SELOGICA direct M-H

ALLROUNDER GE SELOGICA direct M-GE

ALLROUNDER S SELOGICA direct M-S

Course content

• Typical machine features

• Programming the control system

• Setting up the clamping unit and the injection unit

• Adopting the set values

• Quality monitoring and data recording / backup

• Machine maintenance

Course description

10

Course objective: Working with the hydraulic circuit diagram, knowledge

of the hydraulic machine sequence, fast fault detection and rectification

Target group: Service personnel, fitters, electricians, electronics engineers

Prerequisites: Basic knowledge of hydraulics, mechanics



Documents: Course folder with accompanying text and data medium

Service courses hydraulics / mechanicsSC H/M


ALLROUNDER S SELOGICA direct SCS H/M

Course content

• Explanation of the hydraulic circuit diagram

• Explanation of the most important function screens of the

SELOGICA and SELOGICA direct control system

• Pump control

• Operating principle of the injection and clamping units

• Regulating valves

• Measurement and diagnostic options

Course description

11

Course objective: Working with the electric circuit diagram, knowledge

of the electric machine sequence, fast fault detection and rectification

Target group: Service personnel, electricians, electronics engineers

Prerequisites: Knowledge of electrics and electronics



Documents: Course folder with accompanying text and data medium

Service courses electrics, electronics SC EL


ALLROUNDER S SELOGICA direct SCS EL

Course content

• Explanation of the electric circuit diagram

• Explanation of the most important function screens of the SELOGICA

and SELOGICA direct control system

• Machine sequence, block diagrams

• Regulating valves

• Measurement and diagnostic options

Course description

12

Course objective: Introduction to injection moulding materials and processing

Target group: Installation technicians, machine operators, production managers,

controllers, sales, designers, planners

Prerequisites: Basic knowledge of injection moulding and

injection moulding materials




KT 1Plastics technology coursesInjection moulding materials / injection moulding process

Technology Code

Injection moulding materials /

injection moulding process KT 1

Course content

Injection moulding materials

• Structure / properties of the plastics

• Condition ranges / fine structure of plastics

• Overview of the most important plastics

Injection moulding process

• Design of the injection moulding machine

• Various injection moulding processes

• Process parameters and their influence on moulded parts

Course description

13

Seminar objectives: Familiarisation with the SELOGICA /

SELOGICA direct user interface

Target group: The seminars are aimed at all those wishing to familiarise them-

selves with the advantages of the SELOGICA / SELOGICA direct control systems

Seminar duration: 1 day (9.00 a.m. - 3 p.m.) per seminar

Tuition fee: Free of charge

Documents: Detailed seminar documentation

I SELSELOGICA information seminars

Subject Code

SELOGICA direct control system options I SEL d

Course content

• Requirements on the plastic parts

• Influence of the injection moulding machine on the moulded parts

• Design of the injection unit and clamping unit

• Function of the control hydraulics of the SELOGICA / SELOGICA direct

control system (control and operating concepts, selection and configuration

of mould, product and order-specific machine equipment, sequence

programming, machine movement parameter programming, programming

monitoring / documentation / help functions, examples of programming

steps when setting up the mould, summary of the SELOGICA /

SELOGICA direct control system)

Course description

14

Course objective: Unaided programming of the ARBURG robotic system

MULTILIFT V, SELECT and H

Target group: Programmers of MULTILIFT robotic systems

Requirements: Basic knowledge in the operation of injection moulding machines



Documents: Course folder and CD

RP MLCourse on robotic systemsMULTILIFT Programmer - Level 1

Robotic system Control Code

MULTILIFT V, SELECT SELOGICA ‘direct’ RP ML-V1

Course content

• Operation of the vertically (V) operating MULTILIFT V or

the horizontally (H) operating MULTILIFT H

• Programming of the MULTILIFT on ALLROUNDERs

• Various practical applications: teach-in programming,

programming of sequences, patterned part set-down and

monitoring functions

• Function description of the inputs and outputs

• Data set management

• Maintenance and inspections of the safety equipment

Course description

16

M40

A425

A425

A445

A429

A452

A452

N

S

EW

1 km

2000 ft

52.27339,-1.54449

ARBURG Ltd.Tachbrook Park Drive | Warwick CV34 6RH

Euro

pa

Way

Old Warwick RdMyton Rd

Stra

tfor

d Rd

Banburg Rd

Emscote Rd

ARBURG Ltd

Tachbrook Park Drive

Warwick CV34 6RH

Tel.: 01926 457000

Fax: 01926 457030

www.arburg.co.uk

E-Mail: [email protected]

Location map

Your signature is an acceptance to our non-liability with regard to personal

damage within our premises

To: ARBURG Ltd, Donna White +44 (0) 1926 457020

or post (in separate envelope) to: ARBURG Ltd, Tachbrook Park Drive,

Warwick, CV34 6RH, Attention: Donna White

from: (please complete this form)

O/N Position

Company:

Address:

Telephone: Fax:

Customer number:

I/We will arrive on:

and depart on:

Date Signature

Course Date Participant`s Names

Enrolment for Training Course Fax

18

Notes

19

Notes

© 2019 ARBURG GmbH + Co KG | All data and technical information have been compiled with great care. However we accept no responsibility for correctness. Individual illustrations and information may deviate from the actual delivery condition of the machine. The relevant valid operating instructions are applicable for the installation and operation of the machine.

Scan this code to visit our Media Centre: in-depth,

captivating, entertaining.

ARBURG Ltd.Tachbrook Park Drive

Warwick CV34 6RHTel.: +44 (0) 1926 457 000

[email protected]

6800

17_G

B_10

2019

· Su

bjec

t to

alte

ratio

ns

Pr

inte

d in

Ger

man

y