gps tracker operation commands(d) obd got10

Upload: dusko-ilic

Post on 10-Jan-2016

107 views

Category:

Documents


4 download

DESCRIPTION

Gps Tracker Operation Commands(d) Obd Got10

TRANSCRIPT

  • GPSGPS TrackerTracker

    Operation Commands

    VERSION / V1.5BASED ON EELINK PROTOCOL

    2015.5.23

    ============================

  • 11. APN Setting...............................................52. Server Setting...........................................53. GPRS Upload Time Interval................... 64. Time Zone Setting....................................65. Language Setting.....................................76. Add SOS Administrator Number............ 87. Delete SOS Administrator Number........98. Add Center Number.................................99. Delete Center Number.......................... 1010.Working Mode Setting..........................1011. Administrators Call Delay...................1112. Heartbeat Packet Upload................... 1113. Add Geo-fence..................................... 1214. Delete Geo-fence.................................1415. Vibration Alarm Setting....................... 1416. Open Shift Alarm..................................1517. Close Shift Alarm................................. 1518. Remote Upgrade..................................1519. Cut off Oil / Power................................1620. Restore Oil / Power............................. 16

  • 221. Restart...................................................1622. Restore factory settings......................1723. Version Inquiry......................................1724. Parameter Inquiry................................ 1725. Status Inquiry........................................1826. Latitude&Longitude Inquiry................ 1927. Edit Map URL.......................................1928. Location URL Inquiry...........................2029. Address Inquiry.................................... 2030. SMS Forwarding.................................. 211APN............................................... 222............................................ 233GPRS............................234................................................ 245................................................ 256 SOS..................................257 SOS..................................268........................................ 279........................................ 2710...................................... 28

  • 311...........................2812.......................... 2913...................................... 2914...................................... 3115...................................... 3216...................................... 3217...................................... 3318.............................................. 3319/.................................................3320/.............................................3421.............................................. 3422...................................... 3423...................................... 3524.............................................. 3525.............................................. 3626.......................................... 3727.............................. 3728...................................... 3829...................................... 3830.............................................. 38

  • 4Explanation about the commands1. All the commands are case-insensitive.

    2. All the parameters of the commandscan be edited and sent by mobile phonesor network. The symbols of the commandsare English symbols (One symbol lengthaccounted for a byte).

    3. Parameters of the commandsseparated by Comma, the parameterswith italic. and Consolas font type need bealtered by users or are altered byterminals automatically.

    For example, Upgrade the newestfirmware, Use the following command:

    UPGRADE,C4_EXT.EXF,WWW.SKY200.COM,69#

  • 51. APN SettingAPN,Network name[,name,password]#

    ExamplesAPN,CMNET#(if no name & Password)APN,internet,internet,internet#

    If the setup is successful, device will reply:SET APN OK

    2. Server SettingSERVER,1,Domain,Port#SERVER,0,IP,Port#

    ExamplesSERVER,1,www.sky200.com,32001#

    SERVER,0,42.120.22.24,32001#

    If the setup is successful, device will reply:SET SERVER OK

  • 63. GPRS Upload Time IntervalTIMER,Gathering interval[,Packetnumber]#

    Examples:TIMER,30#

    Means uploading data per 30sTIMER,15,8#

    Means gathering one packet per 15s, upload dataevery 15*8=120s( after gathering 8 packets )

    Note:Gather time interval: 0 or 10 ~ 18000s, 0

    means forbid uploading, default is 30s .Package number :1-20, default is 1

    If the setup is successful, device will reply:SET TIMER OK

    4. Time Zone SettingGMT,Time zone orientation,WholeTime Zone[,Half Time Zone] #

  • 7Examples:GMT,E,8#if no half time zone)GMT,W,9,30#Note:Parameter : E / W0 ~ 120/15/30/45If the setup is successful, device will reply:SET GMT OK

    5. Language SettingLANG,1/0#

    Examples:LANG,1#LANG,0#

    Note:1 represents Chinese0 represents English

    If the setup is successful, device will reply:SET LANG OK

  • 86. Add SOS AdministratorNumberSOS,A,1st number,2nd number,3rdnumber#

    Examples:SOS,A,13800138000,1380013800

    1,13800138002#Means to set 3 numbers at a time.

    SOS,A,13800138000#Means to set 1st number.

    SOS,A,,13800138001#Means to set 2nd number.

    SOS,A,,,13800138002#Means to set 3rd number.

    NoteSOS Administrator will get SOS calland receive alarm SMS messages from devices.

    If the setup is successful, device will reply:SET SOS OK

  • 97. Delete SOS AdministratorNumberSOS,D,1st number,2nd number,3rdnumber# or SOS,D,1,2,3#

    Examples:SOS,D,13800138000#

    Means to directly delete the number.SOS,D,1#

    Means to delete 1st number.SOS,D,3#

    Means to delete 2nd number.SOS,D,2,3#

    Means to delete 2nd and 3rd number.

    If the setup is successful, device will reply:DEL SOS OK

    8. Add Center NumberCENTER,A,center number#

    Example:CENTER,A,13800138000#

  • 10

    Note: Center number is only used for cuttingoff power or oil, it can only be set by SOSadministrator when using this command by SMS.

    If the setup is successful, device will reply:SET CENTER OKIf the setup failed, device will reply error and

    reason.

    9. Delete Center Number

    CENTER,D#If the setup is successful, device will reply:DEL CENTER OK

    10.Working Mode SettingSAVING,0/1/2/3#

    ExampleSAVING,1#NoteThere are 4 kinds of working mode, if

    the device type is built-in battery and need longstandby(like GPT06/K9/K20), choose differentworking mode to save power.

  • 11

    0# Tracking ModeGPS always on1# Saving ModeGPS off when device is

    static, GPS on when device is moving or beeninquired. (some devices type detect moving byMotion Sensor

    2# Sleeping ModeGPS on when devicewas being inquired;

    3# Hibernation ModeGPS always off;If the setup is successful, device will reply:SET SAVING OK

    11. Administrators Call DelayDELAY,time#Example:DELAY,30#

    Means get through after 30s administrators ringing

    Note: The Call from Administrator willautomatically get through after a delay time . It canbe used for listen. (Need Call ID display service)

    Range :5-60s, default is 10s.If the setup is successful, device will reply:SET DELAY OK

  • 12

    12. Heartbeat Packet UploadHBT,time#Example:HBT,3#

    Note: Function see EELINK ProtocolRange :1-60min, default 3min.If the setup is successful, device will reply:SET HBT OK

    13. Add Geo-fenceFENCE,fence ID,fence

    tag,parameter1,parameter2,parameter3,parameter4#

    Example:FENCE,1,OR,,,500#

    Set No.1 round fence,OR alarm type: out-fencealarm; current point as the center, radius 500 m.

    FENCE,2,IR,,,500#Set No.2 round fence, IR alarm type: in-fencealarm; current point as the center, radius 500 m.

  • 13

    FENCE,3,CR,,,500#Set No.3 round fence, CR alarm type: across-fencealarm; current point as the center, radius 500 m.

    FENCE,4,OR,113.5,22.5,500#Set No.4 round fence, OR alarm type:

    out-fence alarm; Latitude and longitude (113.5,22.5)as the center, radius 500 m.

    FENCE,5,IR,113.5,22.5,500#Set No.5 round fence, IR alarm type:

    in-fence alarm; Latitude and longitude (113.5,22.5)as the center, radius 500 m.

    FENCE,6,CR,113.5,22.5,500#Set No.6 round fence, CR alarm type:

    across-fence alarm; Latitude and longitude(113.5,22.5) as the center, radius 500 m.FENCE,1,OS,113.2,22.2,113.8,22.8#

    Set No.1 rectangular fence, OS alarm type:out-fence alarm; In longitude and latitude (113.5,22.5), (113.8, 22.8) forming a rectangle.FENCE,2,IS,113.2,22.2,113.8,22.8#

  • 14

    Set No.2 rectangular fence, IS alarm type:in-fence alarm; In longitude and latitude (113.5,22.5), (113.8, 22.8) forming a rectangle.FENCE,3,CS,113.2,22.2,113.8,22.8#

    Set No.3 rectangular fence, CS alarm type:across-fence alarm; In longitude and latitude (113.5,22.5), (113.8, 22.8) forming a rectangle.

    14. Delete Geo-fenceFENCE,0# or FENCE,N#

    Examples:FENCE,0#

    Delete all fencesFENCE,5#

    Delete 5th fence

    15. Vibration Alarm SettingMOTION,sensitivity,duration#Example:MOTION,2,5#

    Note:

  • 15

    Sensitivity Level0-91-9 is from week tostrong vibration0 means close Vibration alarm.

    Duration time0-60 seconds

    16. Open Shift AlarmSHIFT,shift range#Example:SHIFT,100#

    Means Setting 100 meters shift alarm range, whenthe ignition turned off, Vehicles 100 meters shiftwill trigger the alarm.

    17. Close Shift AlarmSHIFT,0#Close Shift alarm.

    18. Remote UpgradeUPGRADE,upgrade package,

    domain name / IP, port #

    Example:UPGRADE,C4_EXT.exf,www.sky20

    0.com,69#

  • 16

    Firmware packageC4_EXT.exfDomainwww.sky200.comPort69

    19. Cut off Oil / PowerRELAY1#Note:The Command can only be executed by

    Center Number When it was sent by SMS,.The Command can not be executed when

    GPS is not positioned or vehicle speed higher than20KM / H

    If the setup is successful, device will reply:RELAY ENABLE OKOtherwise, Command can not be executed

    and reply the reasons.

    20. Restore Oil / PowerRELAY0#If the setup is successful, device will reply:RELAY DISABLE OK

  • 17

    21. RestartRESET#

    If the setup is successful, device will reply:RESET OK

    22. Restore factory settingsFACTORY#

    If the setup is successful, device will reply:FACTORY OK

    23. Version InquiryVERSION#

    Device Reply ExampleIMEI:354188046912460IMSI:9460025500276617ICCID:898602A51314F1298017SYSTEM:M6000_V1.8.6VERSION:MXAPP_V1.9.3BUILD:MAY 21 2015 11:08:43

  • 18

    24. Parameter Inquiry

    PARAM#

    Device Reply ExampleIMEI:354188046912460APN:CMNETIP:WWW.SKY200.COM:32001TIMER:30,1CENTER:SOS:15816316808,,LANG:CNGMT:E8.00SAVING:1

    25. Status Inquiry

    STATUS#

    BATTERY: XX% (Built-in Battery Percent)GPRS: CLOSED (No Network)

    FAILED (Connecting Network or Failure)SUCCESS (Connected to Network

    GSM: NONE (No GSM Signal)HIGH / MED / LOW (Signal Strength)

  • 19

    GPS: CLOSED (GPS Module Closed)FIXED,N (Positioned and satellite number)UNFIX,0 (Not Positioned yet)

    ACC: ON / OFF (ACC on or off)RELAY: ON / OFF (Relay on or off)POWER: OK / NC (Power Connected or Break)MS: LIS3DH (Motion Sensor type or No display ifdevice dont have that component)

    Device Reply ExampleBATTERY:100%GPRS:SUCCESSGSM:HIGHGPS:FIXED,10ACC:OFFRELAY:OFFPOWER:OKMS:LIS3DH

    26. Latitude&Longitude InquiryWHERE#Device Reply Example:

    LAT:N23.02930,LON:E114.32180,COURSE:0.00,SPEED:0.00KM/H,DATETIME:2015-05-23 14:39:11

  • 20

    27. Edit Map URLEURL,webmap url#Example:EURL,http://maps,google.com/

    maps?q=#

    If the setup is successful, device will reply:SET EURL OK

    28. Location URL InquiryURL#Device Reply Example:

    http://map.google.com/?q=22.557868,113.935090

    IMEI:354188047752402

    29. Address InquiryPOSITION#

    Device Reply Example:3 Songpingshan Qimin Road, Nanshan,

    Shenzhen, Guangdong, China, 518057

  • 21

    Note: Reply messages language isdetermined by devices language setting, if getposition content failed, device will reply GoogleMap location link.

    30. SMS ForwardingFW,forwarding number,content#

    Examples:FW,10086,CXYE#FW,10010,CXHF#When receives this command, device will

    send a SMS to forwarding number with thecontent, If get a reply from forwarding number in5 minutes , device will forward the reply to thecommand sender.

    The command usually be used for check thebalance of SIM card.

  • 22

    1

    2

    3#

    UPGRADE,C4_EXT.EXF,WWW.SKY200.COM,69#

  • 23

    1APNAPN,[,,]#

    APN,CMNET#( APN)APN,internet,internet,internet#

    APN# APNSET APN OK

    2SERVER,1,,#SERVER,0,IP,#SERVER,1,www.sky200.com,32001#

    SERVER,0,42.120.22.24,32001#

    SET SERVER OK

  • 24

    3GPRSTIMER,[,]#

    TIMER,30# 30TIMER,15,8# 15 8

    15*8=1200 10~18000s0

    30s1-20 1SET TIMER OK

    4GMT,,[,]#

  • 25

    GMT,E,8#)GMT,W,9,30#E/W ; 0~12 ; 0/15/30/45SET GMT OK

    5LANG,1/0#

    LANG,1#LANG,0#

    10SET LANG OK

    6 SOSSOS,A, 1, 2, 3#

  • 26

    SOS,A,13800138000,13800138001,

    13800138002# 3 SOS

    SOS,A,13800138000# 1 SOS

    SOS,A,,13800138001# 2 SOSSOS,A,,,13800138002# 3 SOSSOS

    SET SOS OK

    7 SOSSOS,D, 1, 2, 3#SOS,D,1,2,3#

    SOS,D,13800138000#

  • 27

    SOSSOS,D,1# 1SOS,D,3# 3SOS,D,2,3# 2 3

    DEL SOS OK

    8CENTER,A,#CENTER,A,13800138000#

    SOS

    SET CENTER OK

  • 28

    9CENTER,D#DEL CENTER OK

    10SAVING,0/1/2/3#SAVING,1# 4

    GPT06/K9/K20)0# GPS1# GPSGPS2# GPS3# GPS

    SET SAVING OK

  • 29

    11DELAY,#DELAY,30#

    ,SIM

    5-60s 10sSET DELAY OK

    12HBT,#HBT,3#

    1-60min, 3minSET HBT OK

  • 30

    13FENCE,,,,,,#

    FENCE,1,OR,,,500# 1OR

    500FENCE,2,IR,,,500# 2IR

    500FENCE,3,CR,,,500# 3CR

    500

    FENCE,4,OR,113.5,22.5,500# 4OR

    113.5,22.5 500

  • 31

    FENCE,5,IR,113.5,22.5,500# 5IR

    113.5,22.5 500

    FENCE,6,CR,113.5,22.5,500# 6CR

    113.5,22.5 500FENCE,1,OS,113.2,22.2,113.8,22.8#

    1OS113.5,22.5113.8,22.8FENCE,2,IS,113.2,22.2,113.8,22.8#

    2IS113.5,22.5113.8,22.8FENCE,3,CS,113.2,22.2,113.8,22.8#

    3CS113.5,22.5113.8,22.8

  • 32

    14FENCE,0# FENCE,N#FENCE,0#FENCE,5# 5

    15MOTION,,#MOTION,2,5#

    0-91-9

    00-60SET MOTION OK

  • 33

    16SHIFT,#SHIFT,100#

    100 100

    17SHIFT,0#

    18UPGRADE,,/IP,#UPGRADE,C4_EXT.exf,www.sky20

    0.com,69#

    C4_EXT.exfwww.sky200.com69

  • 34

    19/RELAY,1#

    GPS>20KM/H

    RELAY ENABLE OK

    20/RELAY,0#

    RELAY DISABLE OK

    21RESET#

    RESET OK

  • 35

    22FACTORY#

    FACTORY OK

    23VERSION#IMEI:354188046912460IMSI:9460025500276617ICCID:898602A51314F1298017SYSTEM:M6000_V1.8.6VERSION:MXAPP_V1.9.3BUILD:MAY 21 2015 11:08:43

    24PARAM#IMEI:354188046912460APN:CMNET

  • 36

    IP:WWW.SKY200.COM:32001TIMER:30,1CENTER:SOS:15816316808,,LANG:CNGMT:E8.00SAVING:0

    25STATUS#

    BATTERY: XX%GPRS: CLOSED

    FAILEDSUCCESS

    GSM: NONE GSMHIGH / MED / LOW

    GPS: CLOSEDGPSFIXED,N GPS UNFIXED,0GPS

    ACC: ON / OFFONACCOFFACCRELAY: ON / OFFONOFFPOWER: OK / NC/MS:LIS3DH

  • 37

    BATTERY:100%GPRS:SUCCESSGSM:HIGHGPS:FIXED,10ACC:OFFRELAY:OFFPOWER:OKMS:LIS3DH

    26WHERE#

    LAT:N23.02930,LON:E114.32180,COURSE:0.00,SPEED:0.00KM/H,DATETIME:2015-05-23 14:39:11

    27EURL,#EURL,http://ditu,google.cn/m

    aps?q=#

  • 38

    SET EURL OK

    28URL#

    HTTP://DITU.GOOGLE.CN/?Q=23.029595,114.318740

    IMEI:354188046912460

    29123

    3 518057

  • 39

    30FW,,#FW,10086,CXYE#

    FW,10010,CXHF#

    5

    1. APN Setting2. Server Setting3. GPRS Upload Time Interval4. Time Zone Setting5. Language Setting6. Add SOS Administrator Number7. Delete SOS Administrator Number8. Add Center Number9. Delete Center Number10.Working Mode Setting11. Administrators Call Delay12. Heartbeat Packet Upload13. Add Geo-fence14. Delete Geo-fence15. Vibration Alarm Setting16. Open Shift Alarm17. Close Shift Alarm18. Remote Upgrade19. Cut off Oil / Power20. Restore Oil / Power21. Restart22. Restore factory settings23. Version Inquiry24. Parameter Inquiry25. Status Inquiry26. Latitude&Longitude Inquiry27. Edit Map URL28. Location URL Inquiry29. Address Inquiry30. SMS Forwarding1APN23GPRS456SOS7SOS8910111213141516171819/20/21222324252627282930