MEETING THEDEMANDS OF THECONSTRUCTION MARKET

ANY TIME. ANYWHERE.

Gorman-Rupp is the leading manufacturer of pumps for the construction market. Offering nearly 3,000 models, we have one of the largest selections of fluid-handling products in the world. We have been manufacturing pumps and pumping systems since 1933, and many of the innovations introduced by Gorman-Rupp over the years have become industry standards. With four manufacturing facilities, five distribution centers and over 1,000 distributors around the world, we are always ready to meet your needs.

Our product line includes self-priming centrifugal, standard centrifugal, priming-assisted, submersible and diaphragm pumps used extensively for dewatering applications in quarries, streams, foundations, mines, coffer dams and sewage bypass operations. Simple pump designs with few moving parts minimize the need for repair or service. On most models, routine field maintenance can be completed with common hand tools.

As we continue to offer the finest pumps and pumping systems around the globe, we never lose sight of the founding philosophy of our company: innovation, continuous improvement, and superior products and service.

3" portable utility pump dewatering

footers at a construction site.

6" PAH Series high-head priming-assisted

pump in a sewage bypass operation.

8" S Series submersible pump

dewatering a holding pond in a quarry.

4" 80 Series® self-priming pump used to supply make up water

at a drilling site.

SOLD & SERVICED THROUGHOUT THE WORLDGorman-Rupp has over 1,000 distributors throughout the United States and the world that are qualified to give expert advice on pump selection and application. If you have a service problem, a factory-trained distributor is only a phone call away. Our distributors are backed by the fastest parts service in the industry. Gorman-Rupp stocks more than 60,000 pumps and parts and ships 97% of them within 24 hours so your parts will be there when you need them.

Our distributors are authorized to put a new Gorman-Rupp engine-driven contractor’s pump alongside any other make pump of the same size, type and horsepower, any time, anywhere. The Gorman-Rupp pump will pump more dirty water, more hours, using less fuel and prime quicker. If within 30 days of purchase it is not the best all-around pump, our distributor will accept the return of the Gorman-Rupp pump for a full refund.

Manufacturing FacilitiesDistribution Centers

The Gorman-Rupp CompanyMansfield, Ohio, USA

Mansfield DivisionMansfield, Ohio, USA

The Gorman-RuppInternational CompanyMansfield, Ohio, USA

Gorman-Rupp Industries Bellville, Ohio, USA

Patterson Pump Company Toccoa, Georgia, USA

National Pump Company Glendale, Arizona, USA (Headquarters)Fresno, California, USAZolfo Springs, Florida, USAVienna, Georgia, USAOlive Branch, Mississippi, USALubbock, Texas, USA

American Machine and Tool Co., Inc. of PennsylvaniaRoyersford, Pennsylvania, USA

Distribution CentersSparks, Nevada, USASand Springs, Oklahoma, USALeeuwarden, NetherlandsBangkok, Thailand

Patterson Pump Ireland Limited County Westmeath, Ireland

Gorman-Rupp EuropeLeeuwarden, Netherlands

Gorman-Rupp of Canada LimitedSt. Thomas, Ontario, Canada

Printed in the USA

Gorman-Rupp InternationalP.O. Box 1217Mansfield, Ohio 44901-1217, USATel: 419-755-1011Fax: 419-755-1266E-mail: intsales@gormanrupp.com

The Gorman-Rupp CompanyMansfield DivisionP.O. Box 1217Mansfield, Ohio 44901-1217, USATel: 419-755-1011Fax: 419-755-1251E-mail: grsales@gormanrupp.com

GRpumps.com©2008-2011 The Gorman-Rupp Company. All rights reserved.

Gorman-Rupp of Canada, Ltd.70 Burwell RoadSt. Thomas, Ontario N5P 3R7, CanadaTel: 519-631-2870Fax: 519-631-4624E-mail: grcanada@grcanada.com

Product information is subject to change; consult factory for details.

Gorman-Rupp's 825,000 square foot manufacturing facility

and corporate headquarters located in Mansfield, Ohio,

accommodates the most advanced technology available.

GORMAN-RUPP PUMPS n THE RIGHT PUMP FOR THE JOB

THE RIGHT PUMPFOR YOUR JOB

6" sound-attenuated pumps at a road/bridge construction project.

We have built our reputation on the workhorses of the construction pump market: priming-assisted and self-priming centrifugal trash pumps. These dependable, versatile performers help contractors move large volumes of water rapidly, even when sticks, stones and debris would normally present a problem.

We know that many jobs don’t end when the crew goes home, so we manufacture a complete line of submersible pumps that can be left unattended for extended periods of time, quietly working overtime beneath the water level. Submersible pumps excel in pumping water from narrow coffer dams and deep excavations.

Gorman-Rupp also manufactures a line of diaphragm pumps that efficiently carry mud and sand-laden water away from construction sites.

OTS Pumps by Gorman-Rupp are a line of economical, lightweight pumps designed for easy portability in the field.

Gorman-Rupp’s experience and commitment to innovation in pump design guarantees our position of leadership in the construction market for years to come.

Superior products require state-of-the-art facilities, and Gorman-Rupp’s manufacturing plants are among the most efficient and modern facilities in the world. We continuously update our plants and employ the latest technology to ensure our products are the most reliable in the industry. Our commitment to engineering and manufacturing superiority has remained unchanged over the years. We realize that modern, efficient facilities are necessary for providing superior fluid-handling solutions.

Priming-assisted pumps work

relentlessly in the most demanding conditions.

AV-05326_REV0211

9001:2008

SELF-PRIMING TRASH PRIMING-ASSISTED HIGH PRESSURE

POWER TAKE-OFF

FUEL HANDLING

BASIC AND ELECTRIC DRIVEN PUMPSSELF-PRIMING DEWATERING SUBMERSIBLE PUMP ENDS

Gorman-Rupp’s extra heavy-duty self-priming centrifugal trash pumps have the muscle and stamina to handle really tough pumping jobs. When stones, sticks, rags and construction debris clog other pumps, Gorman-Rupp trash pumps take over.

Depending on the model, these pumps can pass up to 3" diameter spherical solids.

Gorman-Rupp trash pumps feature an exclusive removable coverplate that provides quick and easy access to the impeller for inspection or service without removing any hoses or piping.

Gorman-Rupp also offers trash pumps with Auto-Start controls. Auto-Start controls start and stop the pump with input from a liquid level sensor. Pumps with this option start only when there is water to pump and turn off when the water reaches the desired level. There is never any need to run pumps dry, wasting fuel and adding to costly engine overhauls.

Gorman-Rupp Prime Aire® (PA Series) Prime Aire PlusTM (PAH Series) and Redi-Prime® (RP Series) Trash Pumps are the perfect solution for sewage bypass operations, construction site dewatering and other applications where intermittent flow can be problem. These units feature our positive priming system that virtually eliminates leaks, reducing environmental concerns and giving the unique capability to operate under flooded suction staging conditions. Available with Auto-Start controls.

Gorman-Rupp offers several models of high-volume, high-pressure self-priming and standard centrifugal pumps. These high efficiency pumps have few moving parts, so maintenance and service are minimal.

Power Take-Off self-priming centrifugal pumps are ideal for dust control on construction sites and mines, and on water trucks. No check valves means better

suction when handling fluids.

Gorman-Rupp manufactures a full line of self-priming centrifugal pumps designed specifically for pumping clear, non-abrasive petroleum products. Straight-in suction designs allow these pumps to operate at higher suction lifts than most other self-priming centrifugal pumps. The are available in close-coupled, electric motor driven and engine driven models.

OTS (Off-the-Shelf) Pumps are a complete line of small pumps, including self-priming, standard centrifugal, diaphragm, submersible, mag drive, peristaltic, bellows, gear and piston models. Drive options include engines, electric motors or basic pedestal configurations. Over 600 models are available in two weeks or less and 200 models are available off-the-shelf.

GO

RM

AN

-R

UP

P

PU

MP

S

PE

CI

FI

CA

TI

ON

S

60 SeriesEngine Driven CentrifugalSize: 1.5" (38.1 mm) to 6" (152.4 mm)Max. Capacity: 1,900 gpm (119.8 lps)Max. Head: 410' (125 m)

O Series® Electric Driven Self-PrimingSize: 2" (50.8 mm) to 6" (152.4 mm)Max. Capacity: 1,350 gpm (85.2 lps)Max. Head: 400' (121.9 m)

HS Series®

Hydraulic DrivenSize: 3" (76.2 mm) to 6" (152.4 mm)Max. Capacity: 1,500 gpm (94.6 lps)Max. Head: 175' (53.3 m)Max. Solids: 5" (127 mm)

SF Series™

Solids-HandlingSize: 3" (76.2 mm) to 8" (203.2 mm)Max. Capacity: 3,100 gpm (195.6 lps)Max. Head: 190' (57.9 m)Max. Solids: 3" (76.2 mm)Horsepower: 2 to 75 HP

80 Series® ElectricClose-Coupled Self-PrimingSize: 1.25" (31.7 mm) to 1.5" (38.1 mm)Max. Capacity: 92 gpm (5.8 lps)Max. Head: 70' (21.3 m)

Super T Series®

Silent Pump Size: 6" (152.4 mm)Max. Capacity: 1,600 gpm (100.9 lps)Max. Head: 140' (42.7 m)Max. Solids: 3" (76.2 mm)

10 Series®

Engine DrivenSize: 2" (50.8 mm) to 6" (152.4 mm)Max. Capacity: 1,600 gpm (100.9 lps)Max. Head: 175' (53.3 m)Max. Solids: 3" (76.2 mm)

10 Series®

Electric DrivenSize: 1.5" (38.1 mm) to 12" (304.8 mm)Max. Capacity: 6,000 gpm (378.5 lps)Max. Head: 170' (51.8 m)Max. Solids: 3" (76.2 mm)

Prime Aire®

Electric DrivenSize: 3" (76.2 mm) to 12" (304.8 mm)Max. Capacity: 6,200 gpm (391.1 lps)Max. Head: 110' (33.5 m)

Shield-A-Spark™ Engine Driven Self-PrimingSize: 2" (50.8 mm) to 3" (76.2 mm)Max. Capacity: 390 gpm (24.6 lps)Max. Head: 90' (27.4 m)

50 & 60 Series Electric Driven CentrifugalSize: 2" (50.8 mm) to 12" (304.8 mm)Max. Capacity: 6,800 gpm (429.0 lps)Max. Head: 520' (158.5 m)

VG & VGH Series Electric Driven CentrifugalSize: 1.25" (31.7 mm) to 8" (203.2 mm)Max. Capacity: 4,800 gpm (302.8 lps)Max. Head: 450' (143.3 m)

O Series® Power Take-Off and Hydraulic Motor DrivenSize: 2" (50.8 mm) to 3" (76.2 mm)Max. Capacity: 350 gpm (22.0 lps)Max. Head: 350' (106.7 m)

RP & PA Series® Electric and Engine DrivenSize: 2.5" (63.5 mm) to 16" (406.4 mm)

10 & Super T Series®

& Ultra V Series®

Electric and Engine DrivenSize: 3" (76.2 mm) to 10" (254.0 mm)

50 & 60 Series Electric DrivenSize: 2" (50.8 mm) to 12" (304.8 mm)

10 Series®

Engine DrivenSize: 2" (50.8 mm) to 6" (152.4 mm)Max. Capacity: 1,600 gpm (100.9 lps)Max. Head: 260' (79.2 m)Max. Solids: 3" (76.2 mm)

80 Series®

Engine DrivenSize: 1.5" (38.1 mm) to 10" (254.0 mm)Max. Capacity: 3,100 gpm (195.6 lps)Max. Head: 205' (62 m)Max. Solids: 2.5" (63.5 mm)

General Purpose Self-PrimingEngine DrivenSize: 2" (50.8 mm) to 3" (76.2 mm)Max. Capacity: 300 gpm (18.9 lps)Max. Head: 200' (60.9 m)

Portable High-PressureEngine DrivenSize: 1.5" (38.1 mm) to 2.5" (63.5 mm)Max. Capacity: 250 gpm (15.7 lps)Max. Head: 360' (110 m)

DiaphragmElectric and Engine DrivenSize: 2" (50.8 mm) to 4" (101.6 mm)Max. Capacity: 150 gpm (9.4 lps)Max. Head: 50' (15.2 m)

Heavy-Duty Trash Engine DrivenSize: 2" (50.8 mm) to 6" (152.4 mm)Max. Capacity: 120 gpm (7.5 lps)Max. Head: 135' (41.1 m)

Submersible12V Battery PoweredSize: 1.5" (38.1 mm)Max. Capacity: 43 gpm (2.7 lps)Max. Head: 24' (7.3 m)

SubmersibleElectric DrivenSize: 1" (25.4 mm) to 4" (101.6 mm)Max. Capacity: 450 gpm (28.3 lps)Max. Head: 90' (27.3 m)

Ultra V Series® Engine DrivenSize: 3" (76.2 mm) to 6" (152.4 mm)Max. Capacity: 1,825 gpm (115.0 lps)Max. Head: 175' (53.3 m)Max. Solids: 3" (76.2 mm)

Redi-Prime®

Electric DrivenSize: 2.5" (63.5 mm) to 16" (406.4 mm)Max. Capacity: 18,000 gpm (1135.6 lps)Max. Head: 480' (146.3 m)(Optional panel shown)

Super T Series® Engine Driven Size: 4" (101.6 mm) to 10" (254.0 mm)Max. Capacity: 3,500 gpm (220.8 lps)Max. Head: 140' (42.7 m)Max. Solids: 3" (76.2 mm)

Prime Aire®

Silent PumpSize: 4" (101.6 mm) to 12" (304.8 mm)Max. Capacity: 6,200 gpm (391.1 lps)Max. Head: 195' (59.4 m)

Prime Aire®

Engine DrivenSize: 3" (76.2 mm) to 14" (355.6 mm)Max. Capacity: 12,000 gpm (757.0 lps)Max. Head: 420' (128.0 m)

Prime Aire Plus®

Engine DrivenSize: 3" (76.2 mm) to 8" (203.2 mm)Max. Capacity: 4,950 gpm (312.2 lps)Max. Head: 475' (144.7 m)

MOTOR CONTROLS – ENCLOSED STARTERS FOR ELECTRIC MOTOR DRIVEN PUMPSWEG Enclosed Full Voltage Magnetic Motor Controls–Enclosed Starters are the most commonly used devices to switch AC motor loads. WEG Motor Controls are reliable, cost effective and low maintenance.

Enclosure: NEMA Type 4X (Plastic) for outdoor use and NEMA Type 1 (Metallic) lift off for indoor use

Horsepower: 1/2 to 15, 115V, 230V or 460V single or three phase

•NEMAType1enclosuresfeatureoptionalpilotdevicesfor custom installation of Start/Stop Pushbutton, H-O-A Selector Switch and Off-On Selector Switch

•NEMAType4Xenclosuresfeaturebuilt-inManual-Off-Auto (H-O-A) Switch and Start/Stop Pushbuttons

•UL508(NEMA1)andUL508A(NEMA4X)Approved

Gorman-Rupp manufactures a full line of self-priming centrifugal pumps specially designed for dirty water, limited solids and clear water applications. Gorman-Rupp’s heavy-duty, self-priming centrifugal pumps operate above the water level allowing the pump to operate more efficiently at higher suction levels than most other pumps.

Gorman-Rupp submersibles overcome the conventionallimitation of a 28' suction lift, making them ideal for high-head, high-volume applications. Widebase models are designed for open pits and quarries. Slimline models are ideal for drilled wells and narrow openings.

S SeriesSlimline and WidebaseSize: 1.5" (38.1 mm) to 12" (304.8 mm)Max. Capacity: 7,100 gpm (447.9 lps)Max. Head: 600' (182.9 m)Max. Solids: 1" (25.4 mm)Horsepower: 1 to 275 HP

Pump ends are available to meet your specific needs, many with SAE mounts. Consult your Gorman-Rupp distributor for recommended sizes and specifications.

Redi-Prime®

Engine DrivenSize: 2.5" (63.5 mm) to 16" (406.4 mm)Max. Capacity: 18,000 gpm (1135.6 lps)Max. Head: 480' (146.3 m)