2

Goessling USA, InC. Conveyors and Connecting Systems

InteflinlOng and Canve,a. Systems '0. the Hat lIafging Indult" cost reduction by

• modern conveying technology

• heat treatment during cooling

• interlinking techniques

• automation handling

4

Finger conveyor tor hot rods

Steel link belt conveyor tor cooling

Automatie discharge handling unit inside the

torging hammer

steel link belt conveyor tor heavy parts

3

Interlinking and conveyor systems for hot forglngs

We are special ist in the material handling equipment for the forging industry. We deli ver lifting and tipping units, vibrating and hopper feeders for induction furnaces, fast running infeed chain conveyors to hammers or forge presses, all kinds of interlinking conveyor units between upset-, final forge- , and hot trimming presses.

For these purposes we deliver duplex or multi- chain conveyors, wire mesh and steel hinged belt conveyors, heavy duty hinged steel plate and apron conveyors, steel link belt conveyors as weil as all kinds of vibrating chutes, vibrating feeders, and vibrating conveyors, chain drag conveyors as weil as all kinds of pneumatic pushers, transfer and handling units, solid steel roller conveyors and fast running table conveyors. For discharging, batching, and feeding operations we deliver different types of lifting/tipping units (mechanical or hydraulic operations) up to 6000 Ibs (3 tons) loads.

We are worldwide specialists in high temperature trans­port and conveying systems for many years. The part weights may vary from very light hand tools to heavy truck axles or huge bulldozer teeth. We have experience in cooling systems from forging heat, in annealing , and tempering of forged parts.

For any material or handling problems in the hot forging industry you should contact uso It would be to your advantage.

Chain - bed - conveyor for temporary storage of heat defective long steel rods (in connection with an induction furnace in the automotive industry)

Wire mesh belt

Steel link belt

Steel hinged belt

Multi chain belt

Wire mesh belt conveyors for hot forgings and trimmings, slugs, ect.

For fully automatic hot forging machines (National, Hatebur, Nedschroeff, Schuler) we have developed steep discharging multi-Iane conveyors with high abrasive­resistant flights and guiding elements of a newly designed manganese hard steel to double or even tri pie the life time of ordinary hardened roller chains.

For controlled cooling from forging temperatures (BY-cooling line in TTT curve) we deliver complete cooling conveyors with heavy duty fans and controlled air streams on the hot forgings to cool them in designated and controlled speed. We can deliver this equipment for all kinds of light or heavy weight forgings. We have Engineered a special cooling conveyor for sensitive small and long forgings in order to avoid bending defects (in connection with hot forging hammers).

Wire mesh belt conveyors for use around all types of forging and trimming presses

Dur wire mesh belt conveyors are chain-guided and -driven. Roller chains on both belt edges with hardened rolls move and carry the belt. The wire mesh belts are made of high resistant round steel wires. Running side­plates border the eftective belt width and flights assist steep ascension. The electric 3-ph gear motor drive is protected by a friction clutch or by a current control relay (without delay).

The belt chains are guided on steel rails of Manganese -Hard - Steel with almost no wear during the years of running. Dur hinged steel belt conveyors are mainly used for trimmings and slugs.

Chain-drag conveyors will be used for very heavy parts and limited height of the conveyor body.

Please ask for specialliterature.

Double-Iane wire mesh belt conveyor with long infeed end

Wire mesh belt conveyor for forged safety parts (automotive industry)

13

14

Double-Iane wire mesh belt conveyor for auto­matically produced two size forgings

For loading and unloading purposes we ofter a wide range of lifting and tipping units, floor-mounted or movable. Any discharge height

Hinged steel belt conveyor

can be accommodated. During tipping, the lifted customers container will be fixed automatically within the lifting platform housing. The lifting speed will be switched down (pole changing) to a lower rate for discharging.

For lifting and tipping heavy loads to more than 6 ft (2 m) height, our lifting units come with automatie safety and stop­devices that will stop and carry the load in case of a broken chain. (According to US-OSHA and European-CE safety laws).

We deliver: to charge barrels / drums

to feed machines and hoppers

to feed machines and hoppers

to lift boxes up to 3 ft (1 m)

Chain drag conveyor

Hinged steel belt conveyor with swivel discharge chute

19

container loader 1000 Ibs [50-500 dN (kg)] lift-ti pp-boy 1500 Ibs [50-750 dN (kg)] Hebelix 6000 Ibs [1000-3000 dN (kg)] Hygo I, 11, 111 6000 Ibs [1000-3000 dN (kg)]

17 Container loader 1000lbs

20

23 Hinged steel belt conveyers

25

Chain drag conveyor with swivel support

Lift-tipp-boy 1000lbs

Hydraulic tipping unit 6000 Ibs

Hinged steel belt conveyor for cooling purpose (convection cooling)

Chain guided finger conveyer fer hot square-rods

27

For tipping heavy steel containers we can deliver hydraulic tipping units for 1 , 2 or 3 tons.

For feeding jet steel grid blasting chambers we deliver skip hoists to discharge box containers up to 3 tons per load directly into the blasting chamber.

The complete blasted cold forgings will then be discharged and transported on a heavy duty vibrating or steel apron conveyor in connection with heavy duty flat plastic/rubber belt conveyor for visual control purposes (forge mistakes, notch defects, ect.)

Skip hoist for a jet steel grid blasting chamber

Hinged steel plate conveyor for a Hatebur automatie hot forging press (Manganese Hard Steel flights and guiding elements

Double lane hinged steel plate conveyor

for a Hatebur forging press

29 Hinged steel plate

conveyor for heavy hot forgings 30

Submerged bath conveyor (hinged belt type)

Submerged bath conveyor for cooling hot stainless steel forgings

35

Submerged bath conveyor

,\1_ ... \ for annealing (wire mesh

type)

;

Submerged bath conveyor for hardening heavy steel forgings in oil or water tank (truck parts)

Submerged bath conveyor (wire mesh type) with additional drag conveyor to remove forging scales fram the bath

Annealing, Tempering, and Quenching

We deliver complete drive and belt tension stations for continuos belt furnaces as weil as all types of wire mesh and steel hinged belts.

We have successful constructions especially for hinged belts in annealing ovens.

For quenching purposes, we deliver complete sub­merged bath conveyor units including:

tanks, start-heating elements, recooling and circulating units for water, oil, emulsions, and hot liquid salt quenching tanks with complete electrical contra I cabinets.

Submerged hinged steel belt conveyor (Variabie speed, including tank and infeed chute) for hardening purpose

Interliking submerged wire mesh belt

conveyor between hardening and annea­

ling oven (variable speed control)

38

Discharge area of an annealing oven with a wire mesh belt (including running side plates)

Sm all gravity roller conveyor for cold rod bars .~rA:~~

41 Link belt conveyor

43

for cooling heavy forgings

42

Heavy steel link belt conveyors

48

Diabolo rollers (insides water­

cooled) for use be­tween induction coils

(automotive industry)

Diabolo roller conveyor

• to feed round and square rods to a cold shearing machine

We deliver complete roller conveyor systems (using diabolo rolls with harde­ned inside surfaces) for feeding to cold and warm billet shearing machines. We also deliver complete rad magazines and rod decollating units in order to feed automatically into forging machines (Hatebur, National, Schuler, Nedschraef, ect.). Too cold or too warm rods can be retransported to a special chain bed conveyor to store them temporarily for re-use or new heat treatment (see picture nr. 39). There are a great variety of conveyors and handling systems in connection with inductive heating equipments for steel rads that we can deliver.

All detailed constructions cannot be described in this small catalogue. For more information, please ask for our detailed specialliterature.

For short cut steel rads we deliver hopper loaders with inside sorting elements to discharge the rads in a special predeter­mined orientation. To eliminate too cold or too hot short steel rods we deliver swivel chute at the induction ovens discharge end before handling the part to the forge press. For fast transport between upsetting and forging press, our multi-chain conveyors are used [up to 3 Ws (0.9 m / s)]. We are specialists for fast handling of hot rads and forgings.

In case of interest, please get in touch with uso We have a world wide experience.

Multi-chain fast moving conveyor for inter­linking upsetting and forging press

Multi-chain conveyor

Hopper loader for short cut steel rods, and slugs

57 Rod decollating unit

Multi-chain conveyors for fast transport of hot slugs and forgings

59

Rod decollating platform and roller conveyor to feed an induction rod heater

60

eooling steel hinged plate conveyor fer shaped forgings for automotive cars

Controlled eooling from forging temperature

We deliver a wide variety of cooling conveyor systems for almost all different types of hot forgings, even for the safety parts for the automotive industry. To assure that no damage to long tool parts can occur our trunk manipulators are used to carry the hot forgings from the small side space beside the forging hammer to an attached cooling wire mesh belt conveyor with automatie smooth discharge onto the belt surface. The sensitive hot forgings (tools like: spanners, scissors,

tongs, ecl. and other long shaped machine or structure elements)

64 Hinged steel plate cooling conveyer

will be cooled before they are discharged into a standard container.

65

Link belt cooling conveyors

Submerged hinged steel plate conveyor with drying zone at discharge end

68 Link belt cooling conveyor (discharge head end)

70 Hinged steel plate conveyor for discharging a trimming press

Wire mesh belt conveyors in line for continuously controlled cooling of Hatebur made round forgings with air cooling by axial ventilators from the side

cooling conveyors for controlled cooling

of tool parts 74

Hydraulic tipping unit and vibrating feeder to a cold trimming press

Our delivery program tor the Forging Industry:

Rod magazines and Rod decollating systems

Diabolo roller conveyors for induction heaters, for cold billet shears

Chain bed conveyors for storing heat defect rods

Hand on conveyors for hot slugs at back end of induction heaters

Hopper loaders for cold slugs, rod pieces and billets

Finger conveyors for slugs

Multi-chain conveyors and Flat top chain conveyors

for fast transport of hot parts

Wire mesh belt conveyors

Hinged steel plate conveyors

Apron conveyors

Steel link belt conveyors

Multi-chain conveyors for handling hot forgings (impact, die pressed or deepdrawn forgings), center bullets and trimmings or burrings

Low profile conveyors for forging dies

Automatie handling systems with gripper and pusher

Automation devices

Pneumatic and hydraulic pusher systems

Flat table conveyors (even for high speed)

Cooling conveyor systems (BV)

Automatie forging hammer discharge systems

Annealing systems

Submerged tank conveyors

Complete submerged cooling tank systems

Roller conveyor systems for furnaces

Vibrating feeder conveyors

Vibrating cooling conveyors

Helical vibrating feeders

Hydraulic lifting/tipping units

Mechanical lifting/tipping units

Container Loader

Skip hoist for jet blasting chambers

Box lifter for best ergonomie use

Magnetic belt and sliding conveyors

All kinds of flat belt conveyors

Electronic piece counting flat belt conveyors

Flux-testing conveyors (magnetic particle testing)

Demagnetizing belt conveyors, chutes and

sliding platforms

Magnetic discharging conveyors for

vibrating grinding bowls

Submerged tank conveyors for blackening and preservation of finished forgings, tool, ecl.

All kinds of chip conveyors when

machining the forgings

Goessling USA, Inc. Conveyors and Connecting Systems

3308 Wayfield Drive· Johnson City, TN 37601 Phone: + 1 (423) 915-0472 . Fax: +1 (423) 915-0839 e-mail: info@goessl ingusa.com . www.goesslingusa.com