Genie 757Spot Sampling Assembly

The Model 757 spot assembly is the first product designed to solve the usual problems encountered with spot sampling rich and wet natural gases.

Simplicity of Operation The probe contains a manually operated valve located immediately after

the Genie membrane so that pressure reduction takes place in the

flowing gas stream to offset JT cooling and after liquid has been rejected

at line pressure and temperature.

Pre-Assembled to Reduce Ancillary CostsThe manifold comes pre-assembled with everything required for a simple

set up. It includes; a pressure gauge, purge valve and 3 way valve. The

pre-equipped assembly reduces costs and set up time.

Uniquely Engineered Self-Limiting Block Heater The sample flow passageway of the 757 has been tailored to reduce dead

volume and maintain sample integrity. The design allows quick purging

without the risk of liquid accumulation in the sample flow path.

KEYBENEFITS• Valve minimises sample flow rate

and reduces liquid & gas pressure

• Accurate assessment of BTU value

• Easy sampling procedure provides

repeat consistent and accurate

results

• Portable device equipped with all

initial ancillary equipment,

allowing it to be used at several

locations

The most reliable, Analytically Correct™ spot sample assembly for rich/wet gas streams

“ “

11 Ark Royal Way, Lairdside Technology Park, Tranmere, Wirral, CH41 9HTT: +44(0)151 666 8300 F: +44(0)151 666 8329 E: sales@a1-cbiss.com W: www.a1-cbiss.com Buy Online: shop.a1-cbiss.com

Cert No. 996ISO 9001

TECHNICALSPECIFICATION

MAXIMUM PRESSURE RATING• 300-2000 psig (20-137 Bar)

TEMPERATURE RANGES• -35 ºF (-37.2 ºC ) to 185 ºF (85 ºC) contact the factory regarding higher temperature ratings

PROCESS CONNECTION REQUIREMENTS • 3/4”, 1”, or 1.5” NPT full opening threaded or flanged

valve* *Ball, gate, and double block and bleed valves are all suitable for use as long as their inner diameter is not less than ¾”.

DIMENSIONS • Probe Lengths: L: 12” A: ~20”

• Probe Outlet: 1/4” female NPT

• Auxiliary: 1/8” female NPT (plugged from factory)

• Cylinder, Vent, & Bypass Connections: ¼”Female NPT

POWER REQUIREMENTS• 110 to 265 VAC, 80W

• 12VDC, 15W

• 24VDC, 30W

WETTED MATERIALS• Machined parts: 316 stainless steel / NACE compliant

and Perfluoroelastomer threaded bushing

• All other metal parts: stainless steel / NACE compliant

• Sealing material: PTFE / Neoprene rubber standard

• Valve seat material: PFA

• Membrane: inert

HEATER BLOCK ELECTRICAL APPROVALSAmerican NEC Standard (CSA/NRTL)

• File # 1655545 (LR43674)

• Protection Type: Class 1, Division 1, Groups ABCD

ATEX/ IECEx Standard

• EC Examination Certificate - PTB 02 ATEX 1116 X

• IEC Scheme Certificate - IECEx PTB 07.0055X

• Protection Type: II 2 G Ex d IIC T4 BZW. T3PARTBUILDER

Sealing material 0=PTFE/Neoprene rubber (other materials available upon request)

Process connection 3 = 3/4” NPT (not suitable for welding) 4 = 1” NPT 6 = 1.5” NPTSealing

Supply voltage 1 = 110 To 265 VAC, 80W 2 = 24VDC, 30W 3 = 12 VDC, 15W (others available upon request)

Electrical approval C = CSA/NRTL (CI. 1, Div. 1, Grp ABCD) A = ATEX/IECEx (II 2 G Ex d IIC T4 bzw. T3)

Sealing material replacement Part # 75X-570 (sold separately)

Membrane replacement Part # 75X-CMA-506 (contains 1 complete assembly - sold separately)

Replacement probe Part # 757-063-SS-12 (sold separately)

Replacement manifold Part # 757-ACC-811 (includes 0-2000 PSI gauge, purge valve, and 3 way ball valve)

Kozy Part # KZ-9

Sealing material

Process connection

Supply voltage

Electrical approval