functional maths and numeracy study guide - skills … · ‐ mixed numbers (page 40) ... ‐...
TRANSCRIPT
Functional Maths and Numeracy study guide Name_____________________
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 1 of 110
CONTENTS
1) THE FOUR RULES OF ARITHMETIC
‐ Addition (page 2)
‐ Addition of decimals (page 4)
‐ Subtraction (page 5)
‐ Subtraction of decimals (page 8)
‐ Subtraction other methods (page 9)
‐ Multiplication (page 11)
‐ Division (page 15)
‐ Long division (page 17)
‐ Number relationships (page 20)
2) MEASURES, SHAPE AND SPACE
‐ Units of Measure (page 21)
‐ Perimeter, Area, Volume (page 22)
‐ Area (page 23)
‐ Volume (page 26)
3) FRACTIONS ‐ Introduction (page 28)
‐ Equivalent fractions (page 32)
‐ Simplifying fractions (page 34)
‐ Comparing fractions (page 35)
‐ Adding and Subtracting (page 36)
‐ Multiplying with fractions (page 38)
‐ Mixed numbers (page 40)
4) DECIMALS
‐ Introduction and Ordering (page 42)
‐ Dividing and multiplying with powers
of 10 (page 43)
‐ Multiplying with decimals (page 44)
‐ Converting fractions to decimals,
division with decimals (Page 47)
5) PERCENTAGES ‐ Introduction, %s to fractions (page 51)
‐ Percentages of amounts (page 52)
‐ Percentage Worker‐Outer (page 53)
‐ Percentage changes (page 54)
‐ Converting between fractions ,
decimals and percentages (page 57)
6) ROUNDING ‐ Whole numbers (page 59)
‐ Decimals (page 62)
‐ Alternative method (page 65)
‐ to difficult limits (page 66)
7) RATIO
‐ Introduction & Worked Examples
(page 67)
‐ Conversions & Proportion (page 71)
‐ Scale drawings (page 75)
8) NEGATIVE NUMBERS
‐ Introduction (page 80)
‐ Addition and subtraction (page 81)
9) AVERAGES and RANGE ‐ Range (page 87)
‐ Mean, Mode, Median (page 88)
10) REPRESENTING DATA ‐ Introduction (page 91)
‐ Discrete and Continuous Data (page 92)
‐ Bar Charts (page 93)
‐ Line Graphs (page 95)
‐ Scatter Graphs (page 97)
‐ Pie Charts (page 99)
‐ Pictograms (page 101)
‐ Tally Charts (page.103)
‐ Frequency Tables (page 104)
11) ORDER OF CALCULATIONS ‐ Introduction (page 105)
‐ BODMAS (page.106)
12) ALGEBRA AND FORMULAE
‐ Introduction (page 108)
‐ BODMAS (page 109)
L1-2 Functional Maths and Numeracy study guide Addition
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 2 of 110
THE FOUR FUNDAMENTAL RULES OF ARITHMETIC
1: ADDITION
Addition tells us the TOTAL of things.
Q1: What is 23 + 140?
The best start is to correctly line up the digits in HUNDREDS, TENS, and UNITS.
START ON THE RIGHT HAND SIDE and add up the numbers IN COLUMNS.
The first column is 3 and 0, so your first addition is 3 + 0.
Write your answer DIRECTLY UNDERNEATH the column you’ve just added.
Now move to the next column:
And finally the last column:
Once you’ve done the last column you are finished!
So, 23 + 140 = 163.
L1-2 Functional Maths and Numeracy study guide Addition
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 3 of 110
Q2: What is 123 + 189?
Again, first of all line the digits up according to place value:
And again, you start on the RIGHT HAND SIDE.
The first column is 3 + 9, but 3 + 9 = 12. There’s only have room for one
number underneath!
So, you “carry over” the 1 in 12, and write the 2 from the 12 underneath:
You now move on the next column. It used to be 2 and 8.
Now though, you have 2, 8, and the 1 you carried over before.
So now, you do 1 + 2 + 8. This is 11.
Write “1” down and “carry over” the other 1 in the 11.
Now you do the last column: 1 + 1 + the 1 you carried:
You’ve done the last column, so you have finished.
So, 123 + 189 = 312.
L1-2 Functional Maths and Numeracy study guide Addition of decimals
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 4 of 110
Q3: What is 5.5 + 0.98?
Don’t let the decimals bother you! You still start in the same way by lining up
the digits according to place value.
The easiest way to do this is: MAKE SURE THE DECIMAL POINTS LINE UP!
The first column is just 8 on its own. 8 plus... nothing!
Now the second column is 5 + 9, and 5 + 9 = 14.
“Carry over” the 1, and write the 4 underneath.
You must line up the decimal points, so put in another point directly beneath
the others:
Then you finish off by doing the last column as usual:
So, 5.5 + 0.98 = 6.48
L1-2 Functional Maths and Numeracy study guide Subtraction
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 5 of 110
2: SUBTRACTION
Subtraction is the reverse of addition!
If you add something to a number, then take it back off, you’re back to where
you started:
2 + 2 = 4 4 – 2 = 2.
7 + 31 = 38 38 – 31 = 7
Subtraction can tell you quite a few useful things:
The difference between two numbers;
The RANGE of different values (see later!);
What I need to add to a smaller number to get to the bigger one;
How much change I can expect back from my £10 note!
So how do you do it?
Q1: What is 98 – 44?
What you must ALWAYS do is PUT THE NUMBER YOU ARE TAKING AWAY ON
THE BOTTOM.
You are taking away 44, so this goes on the bottom. You line up the digits
according to place value just like you do with addition:
Again, like addition, you start on the RIGHT HAND COLUMN.
You do THE TOP NUMBER MINUS THE BOTTOM NUMBER, which here is 8 – 4:
Then the same for next column, 9 – 4:
That was the last column so you are finished. So, 98 – 44 = 54.
L1-2 Functional Maths and Numeracy study guide Subtraction
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 6 of 110
Q2: What is 109 – 38?
Again, you start in the same way. Line up the digits according to place value
and put the number you are taking away on the bottom:
Your first column is 9 – 8:
Now the next column is 0 – 3. How can you do that?
To make it possible, YOU BORROW 1 FROM THE LEFT AND MOVE IT OVER.
The digit you borrow from becomes smaller by 1, and the 1 you take is placed
just beside the number on the right:
The 0 has become 10 after this “borrowing”.
The 1 you borrowed from becomes 1 smaller, so it becomes 0.
This now means the last column has gone altogether – there’s nothing there.
So all you need to do is the next column, 10‐3:
You have now done all columns. So, 109 – 38 = 71.
L1-2 Functional Maths and Numeracy study guide Subtraction
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 7 of 110
Q3: What is 102 – 45?
Line up the digits according to place value and put the number you’re taking
away on the bottom:
The first column is 2 – 5, which you can’t do. Can you borrow?
The next number across from 2 is 0, so there’s NOTHING THERE TO BORROW!
You need to borrow from the very end, then move the 1
across gradually:
Now the “0” has become “10” so you CAN now borrow from
the middle column.
You borrow 1, which makes the 10 smaller by 1:
Now the “2” has become “12”. You can now carry on
and subtract in the usual way.
Start with the right column, 12 – 5:
Then 9 – 4:
And you are now finished because the 1 on the left was moved over.
So, 102 – 45 = 57
L1-2 Functional Maths and Numeracy study guide Subtraction of decimals
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 8 of 110
Q4: What is 5 – 2.37?
You set out the subtraction calculation in the same way as before.
However, one number is a decimal and the other is not!
If 5 had a decimal point, it would be 5.0, or even 5.00.
There are 0s after the decimal, because there is no decimal part to 5 – it is a
whole number.
So, you can think of the question as 5.00 – 2.37:
You can’t do 0 – 7, so you need to borrow.
You can’t borrow from the next digit, 0, so you need to
borrow from the 5:
The middle 0 has become 10. Now
you borrow AGAIN: You can now
subtract column‐by‐column as
normal.
Then 9 – 3... First column: 10 – 7 :
Now you need to add a decimal point below, so all decimal points line up. Just
like you had to do for addition with decimals:
And finally, the last column, 4 – 2:
So, 5 – 2.37 (which is the same as 5.00 ‐ 2.37) = 2.63
L1-2 Functional Maths and Numeracy study guide Subtraction – other methods
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 9 of 110
Other subtraction methods
Like most maths, there are several methods for any one problem.
You can use subtraction to find the difference between two numbers, or to
find out what you need to add to the smaller number to get to the bigger one.
Using that idea, you can calculate subtraction problems by using addition.
Q1: What is 512 – 149?
Thinking of this in terms of adding, you could also ask
“WHAT DO I NEED TO ADD TO 149 TO GET TO 512?
The trick now is to start at 149 and get to the next “nice” number to make it
easy on yourself.
You could ADD 1 to 149 to get 150.
You could ADD 50 to 150 to get 200.
You could ADD 300 to 200 to get 500.
You could ADD 12 to 500 to get 512!
In total, you added 1, 50, 300 and 12:
This tells you that 512 – 149 = 363, because 149 + 363 = 512
This method comes into its own when you may otherwise have to “borrow”
from the other side again, and again, and again!
L1-2 Functional Maths and Numeracy study guide Subtraction – other methods
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 10 of 110
Q2: What is 50 001 – 49 999?
The standard way would be tedious:
You can’t do 0 – 9, so you must “borrow”, but the next THREE digits are all 0!
You would have to borrow 1 all the way from one end to the other.
OR...
You could ADD 1to 49 999 to get 50 000.
You could ADD 1 to 50 000 to get 50 001.
In total you just added 1 and 1, which is 2.
So, 50 001 – 49 999 = 2.
NB Both ways of subtraction will always work. Use whichever you
feel most confident with.
Functional Maths and Numeracy study guide Multiplication
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 11 of 110
3: MULTIPLICATION
Multiplication can tell you lots of things, including:
The AREA of a 2D shape (See later!);
The VOLUME of a 3D shape (See later!).
In some cases, it is like a faster way of doing addition:
9 + 9 + 9 + 9 + 9 + 9 + 9 + 9 (Slow) 9 x 8 (Quick!)
10 + 10 + 10 + 10 + 10 + 10 + 10 + 10 + 10 + 10 (Slow) 10 x 10 (Quick!)
Q1: What is 17 x 9?
You put the smaller number on the bottom:
Then multiply the bottom number by the numbers above,
MOVING RIGHT TO LEFT.
First, do 9 x 7. This equals 63. Like addition, you “carry over” the 6.
Then do 9 x 1, and remember to add on your carried 6:
9 x 1 equals 9, plus the carried 6 gives 15:
So, 17 x 9 = 153.
NB With multiplication ALWAYS PUT THE FIRST NUMBER DIRECTLY
BENEATH THE DIGIT YOU ARE MULTIPLYING WITH.
Functional Maths and Numeracy study guide Multiplication
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 12 of 110
This general method also works when larger numbers are on the bottom.
Start with the bottom‐right digit, then multiply it by the digits above, moving
FROM right TO left.
When you’re done with that number move on to the next number to the left.
Here’s some examples for the pattern you would follow when multiplying with
larger numbers:
Example 1: 15 x 15
NB With multiplication ALWAYS PUT THE FIRST NUMBER DIRECTLY
BENEATH THE DIGIT YOU ARE MULTIPLYING WITH.
With the first number – 5 – the first digit would go below the 5.
With the second number – 1 – the first digit would go below the 1:
Functional Maths and Numeracy study guide Multiplication
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 13 of 110
Just in case, here is 15 x 15 done STEP‐BY‐STEP:
Start in the bottom‐right, the 5, and multiply with the digits
above moving FROM right TO left. First is 5 x 5, which is 25:
Next you do 5 x 1, PLUS the carried 2:
Now move to the next number, the 1. Again, you multiply from the top‐right
and move left, so first calculation is 1 x 5.
THE ANSWER IS PUT DIRECTLY BENEATH THE 1 WHICH YOU ARE MULTIPLYING:
Next you do 1x1: And you have finished.
THE FINAL STEP IS TO ADD UP THE MULTIPLICATION
ANSWERS:
So, 15 x 15 = 225.
Functional Maths and Numeracy study guide Multiplication
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 14 of 110
Example 2: 108 x 356
Again, it is exactly the same method. I would advise you try this one yourself,
then check back here to see if you got it right!
Then finally, add the totals together:
So, 108 x 356 = 38 448.
NB There are other ways of doing multiplication (the Lattice
Method for example). Use the way you are most comfortable with.
This way is just a personal suggestion.
Functional Maths and Numeracy study guide Division
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 15 of 110
4: DIVISION
Division is the opposite of multiplication.
Because of this, division can tell you what you need to multiply a number by to
get another number:
Example
6 x ? = 18. What is ?
In plain English:
6 multiplied by SOMETHING equals 18. What is that something?
(Hopefully) you know that 6 x 3 = 18, so that something MUST BE 3.
You could have worked this using division: 18 ÷ 6 = 3
Other Examples
2x ? = 10 ? = 5 10 ÷2 = 5
5x ? = 15 ? = 3 15÷5 = 3
10x ? = 20 ? = 2 20÷10 = 2 ‐ see a pattern?
These mystery numbers may have been quite easy to work out WITHOUT
thinking of division, but...
if the question was “7 x ? = 1477”, division comes into its own!
Division can tell you:
What you need to multiply one number by to get the bigger number;
How much of something – maybe money – each person receives;
The FRACTION of a value.
And those are just a few.
NB The link between division and multiplication is explained in
greater detail later on.
Functional Maths and Numeracy study guide Division
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 16 of 110
Division with smaller numbers: mental methods
For smaller numbers, division can often be done without using LONG DIVISION.
Q1: What is 24 6 ?
As long as you remember what division tells you, you will be okay!
This is asking how many 6s fit inside 24?
How many 6s? 1 2 3 4
Value 6 12 18 24
Comments Too small Too small Too small Got it!
So, FOUR 6s fit inside 24, which means 24 6 = 4.
This is just counting the Six Times Table and stopping at the answer:
6, 12, 18, 24, 30, 36...
1 2 3 4 5 6
Q1: What is 147 7?
You could do this again by doing the Seven Times Table, but you might be
going for a long time!
Another method is called CHUNKING. See if so many 7s are enough, and if not,
try to see how many more will fit.
7 x 10 = 70 Not enough! 7 x 20 = 140 Still not enough!
(7 x 20) + 7 = 140 + 7 = 147. So 147 7 = 21 21 7s fit inside 147.
As a check, you can see with the 7x table that there ARE twenty‐one 7s in 147:
7,14,21,28,35,42,49,56,63, 70, 77, 84, 91, 98, 105, 112, 119, 126, 133, 140, 147
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
Functional Maths and Numeracy study guide Division – long division
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 17 of 110
LONG DIVISION
Mental methods may work for smaller numbers, but when dealing with much
larger numbers, LONG DIVISION is often much quicker.
Q1: What is 96 ÷ 4?
The most important first thing is knowing which number goes where!
Here is how it would look:
THE NUMBER YOU ARE DIVIDING GOES ON THE INSIDE.
THE NUMBER YOU ARE DIVIDING BY GOES ON THE OUTSIDE.
Now see how many times 4 can fit inside the first digit (the 9).
4 goes into 9 twice, with 1 remainder. The remainder moves over to the next
digit:
THE 6 HAS NOW BECOME 16 because of the 1 remainder.
Next, how many times does 4 fit inside 16? The answer is FOUR times:
Because there is no remainder, and you’ve done the last digit, you can stop.
So, 96 ÷ 4 = 24.
Functional Maths and Numeracy study guide Division – long division
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 18 of 110
Q2: What is 468 ÷ 9?
The 9 goes on the OUTSIDE, the 468 goes on the INSIDE:
How many times does 9 go into 4? NONE! It’s TOO BIG.
You’ve not used any of the 4, so ALL OF IT STILL REMAINS (remainder = 4):
How many times does 9 go into 46? The answer is FIVE TIMES, 1 remainder:
How many times does 9 go into 18? The answer is TWO TIMES, no remainder:
Because there is no remainder, and you’ve done the last digit, you can stop.
So, 468 ÷ 9 = 52.
Functional Maths and Numeracy study guide Division – long division
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 19 of 110
Q3: What is 5 000 750 ÷ 5?
This example shows it is important to carry on right to the end of the number
you are dividing:
How many times does 5 fit inside 5? EXACTLY ONCE, no remainder:
Even though there is no remainder, you still carry on because you have not
done right to the end. How many times does 5 fit inside 0? It doesn’t!
No remainder.
AGAIN, SAME QUESTION: How many times does 5 fit inside 0? ZERO!
Same question again:
How many times does 5 fit inside 7?
And finally:
So, 5 000 750 ÷ 5 = 1 000 150
L1-2 Functional Maths and Numeracy study guide Number relationships: multiplication and division
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 20 of 110
NUMBER RELATIONSHIPS: MULTIPLICATION AND DIVISION
When multiplying two numbers together the answer will be the same no
matter what order you put the numbers in.
i.e. 2 x 3 = 6 IS THE SAME AS 3 x 2 = 6
(two groups of three) = 6 (three groups of two) = 6
Division: Using the same numbers as the multiplication sums above you
can see their relationship to division sums.
‐ 6 2 = so six sweets divided between two groups = 3
6
‐ 6 3 = so six sweets divided between three groups = 2
6
You saw that 2 x 3 = 6, and that 6 2 = 3. Also,
You saw that 3 x 2 = 6, and that 6 3 = 2.
Can you see the relationship? Division tells you how many times
(=multiplication) one number fits inside another.
3 3 22
2
33
22 2
L1-2 Functional Maths and Numeracy study guide Units of measure
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 21 of 110
UNITS OF MEASURE
Length
1cm = 10mm 100cm = 1m 1 000m = 1km
Imperial Approximations*
1 inch is about 2.5 centimetres (2 centimetres);
1 yard is roughly the same as 1 metre;
1 mile is about 1.6 kilometres (1 kilometres).
Length Area Volume
mm, cm, m, km mm2, cm2, m2, km2 mm3, cm3, m3, km3
Capacity
1000 ml = 1 l 1 l = 1000 cm3
Imperial Approximations*
1 gallon is about 4.5 litres (4 litres);
1 pint is about 0.6 litres ( ths of a litre);
Weight
1000mg = 1g 1000g = 1kg 1000kg = 1 tonne
Imperial Approximations*
1 kilogram is about 2.2 pounds (2 pounds)
You don’t NEED to know anything marked with a star (*). These are just to allow you to relate metric units of measure to imperial units of measure.
L1-2 Functional Maths and Numeracy study guide Introduction to area, perimeter and volume
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 22 of 110
MEASURES, SHAPE AND SPACE
L1-2 Functional Maths and Numeracy study guide Area
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 23 of 110
AREA EXAMPLES
Q1: Find the area of the following rectangles.
a) b)
Remember what area tells us: the amount of room inside a 2D shape.
a) In this question the sides are given in cm. The corresponding unit of area will be
cm2. How many centimetre squares can fit inside the rectangle? Count them.
7 lots of 6 = 7 x 6 = 42cm2
This is the same answer that you‘d get if you did length x width at the start.
This proves that length x width IS a true, fast way of finding the room within a
rectangle – the AREA of a shape.
b) Now you know it works, just do AREA = length x width = 8 x 4 = 32cm2
Just in case you want to have a look:
32cm2 in total.
L1-2 Functional Maths and Numeracy study guide Area
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 24 of 110
Q2: A gardener has a lawn which is 9 metres long and 6 metres
wide. He uses 20 grams of fertilizer per square metre on the lawn.
How much fertilizer does he use?
To begin you must calculate the area of the lawn.
Area of lawn = length x width
‐ From the information in the question you can see the lawn is 9m in
length and 6m in width.
‐ So 9 x 6 = 54m2 (area)
The question tells you that the gardener uses 20g of fertilizer per square
metre of lawn. You know that the area of the lawn is 54m2 . Now
calculate how much fertilizer he would use.
‐ 20 grams per square metre.
‐ The gardener has 54 metres to cover.
‐ So
Amount of fertiliser per square metre x number of square metres =
Total fertiliser used
‐ 54 x 20 = 1080
So 1080 grams of fertilizer is needed by the gardener.
L1-2 Functional Maths and Numeracy study guide Area
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 25 of 110
Q3: A builder using square slabs 45cm long makes a path two slabs
wide and 9m long. How many slabs are used?
Convert the length of the path (9m) into the same unit of measurement
as the slabs (cm).
You know that 1m = 100 cm. So 9m = 900 cm.
Now that you know the path is 900cm long, calculate how many 45cm
slabs would fit into the full length. Calculate this by dividing 900cm by
45cm.
This answer gives you the information that the path is 20 slabs long.
How many slabs are needed for the whole path?
20 slabs on a 900cm path
Look at the question again. It tells you the path is two slabs wide.
So another row of 20 slabs is needed to complete the path so that it is
wide enough.
2 rows of 20 slabs means that 40 slabs are needed to complete the path.
L1-2 Functional Maths and Numeracy study guide Volume
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 26 of 110
VOLUME EXAMPLE
Q1: What is the volume of this cuboid?
Volume of Cuboid = Length x Height x Width
Volume tells you the amount of space INSIDE a shape, or how many cubes can
fit inside. The cuboid above has side lengths in METRES.
The corresponding unit of volume will be CUBIC METRES (m3). One cubic metre
is 1m in length, width, and height:
Volume = length x height x width
= 5 x 3 x 3 = 45m3
45 cubic metres!
L1-2 Functional Maths and Numeracy study guide Volume
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 27 of 110
Or, ask the question, “How many cubic metres fit
inside the cuboid?”
You can fit 5 cubes lengthways, and 3 widthways. As a birdseye view:
There are 15 cubes in total (count
them!).
However, the cuboid is 3m high, so
there is space for 3 layers of 15
cubes:
3 layers of 15 cubic metres = 15 x 3 =
45 cubic metres (45m3)
Which is EXACTLY WHAT YOU GOT by
just doing length x width x height.
This shows that length x width x height DOES calculate the amount of room, or
space, inside a cuboid.
NB: It doesn’t matter what order you do the multiplying, so don’t worry!
3 x 3 x 5 = 45
3 x 5 x 3 = 45
5 x 3 x 3 = 45
Bottom line for cubes/cuboids:
Length x Width x Height
L1-2 Functional Maths and Numeracy study guide Fractions - introduction
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 28 of 110
FRACTIONS
A number can be divided into fractions (or parts)
In a fraction the bottom number (denominator) tells you how many
parts the number is divided into.
The top number (numerator) tells you the amount of those parts you
are working with (shaded)
Fractions are a good way of telling us how much of the total we have.
If you get in a quiz it means you have got 6 correct out of the total of 10.
The top number = how much you have, or the amount in question
The bottom number = the total number of parts, or things.
L1-2 Functional Maths and Numeracy study guide Fractions - introduction
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 29 of 110
Division shares, or “splits” a number into different parts.
Fractions are the same.
Examples
means ONE HALF: 1 2 which means 1 whole split into 2 equal parts
means ONE FIFTH: 1 5 which means 1 whole split into 5 equal parts
means ONE EIGHTH: 1 8 which means 1 whole split into 8 equal parts
The fractions above are called UNIT FRACTIONS. They all have 1 as the top
number.
The top number isn’t always one!
means THREE EIGHTHS.
You don’t just have one eighth, you have three of them:
= 3 x
In the same way:
= 4 x = 2 x
= 7 x and so on.
L1-2 Functional Maths and Numeracy study guide Fractions - introduction
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 30 of 110
NB If the top and bottom number of the fraction are the same, the fraction will
be equal to one whole (=1).
L1-2 Functional Maths and Numeracy study guide Fractions - introduction
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 31 of 110
FRACTION QUESTIONS
Q1: Look at the picture. How much of the shape has been shaded?
First look at how many parts the shape has been divided into.
The shape has been divided into four parts.
The number of parts will become the bottom number of the fraction , 4
(the denominator).
Now look at how many parts have been shaded = 1
This number is the top number of the fraction (numerator).
So this fraction = ( of the circle is shaded; one part out of four).
Picture examples
L1-2 Functional Maths and Numeracy study guide Fractions – equivalent fractions
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 32 of 110
EQUIVALENT FRACTIONS
Equivalent fractions look different to each other but have the same value.
looks different to but they BOTH represent the same fraction of the circle
that is shaded. is the same size as .
In other words: =
Like the first example:
looks different to but they BOTH represent the same fraction of the circle
that is shaded. is the same size as
In other words: =
L1-2 Functional Maths and Numeracy study guide Fractions – equivalent fractions
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 33 of 110
Equivalent Fractions are fractions that have the same value.
is the same as
is the same as
You can go from one equivalent fraction to another by MULTIPLYING or
DIVIDING BOTH the fraction’s TOP and BOTTOM number by the same thing:
Whatever you do to the top, you do to the bottom.
And – you can guess
Whatever you do to the bottom, you do to the top.
L1-2 Functional Maths and Numeracy study guide Fractions – equivalent fractions
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 34 of 110
SIMPLIFYING FRACTIONS
SIMPLIFYING a fraction means finding a simpler equivalent fraction.
Q1: Simplify
To simplify a fraction, you make the top and bottom as small as you can.
Remember – what you do to the top you have to do to the bottom.
You want to make the numbers smaller. You will be DIVIDING.
You need to think of a number you can divide both 45 AND 135 by.
What fits into 45 AND 135? If a number ends in 5, you can divide by 5!
45135
5 ⟶5 →
927
Can you simplify again? What fits into 9 AND 27? How about 9?
⟶ →
So
45135
13
L1-2 Functional Maths and Numeracy study guide Fractions – comparing fractions
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 35 of 110
COMPARING FRACTIONS
Comparing fractions is best done by using equivalent fractions to see which
fraction is bigger than the other.
Q1: Put these in order of size: , , .
The easiest way is to rewrite the fractions as equivalent fractions with the
same bottom number.
5, 10 and 8 are on the bottom – what number can 5, 10 and 8 all “fit into”?
One possible answer is 40. (40 ÷ 5 = 8, 40 ÷ 10 = 4, 40 ÷ 8 = 5)
Now, make each bottom number equal to 40. Remember the rule: what you
do to the bottom number you also do to the top number!
24 out of 40 is less than 25 out of 40 which is less than 28 out of 40!
So you can see that the smallest fraction is , then and the biggest is .
L1-2 Functional Maths and Numeracy study guide Fractions – adding and subtracting
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 36 of 110
ADDING AND SUBTRACTING FRACTIONS
When you add or subtract fractions it is important the bottom numbers
(denominators) are the same.
Q1: (Easy!) Find +
This means you have one half plus one half.
How many halves in total? TWO: + = = 1 (Because two halves
make one whole).
Q2: Find +
This says “Find two quarters plus one quarter”. How many quarters in total?
Two quarters + One quarter = Three Quarters. + = .
Q3: Find +
Here you have halves and quarters, which are not the same!
First of all let’s picture it. There are two different fractions of a whole.
So, one half is actually the same as two quarters =
L1-2 Functional Maths and Numeracy study guide Fractions – adding and subtracting
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 37 of 110
So + =
Remember equivalent fractions. To add or subtract fractions you need the
bottom numbers to be the same. With + , how can you make the bottom
numbers equal?
You could multiply 2 by 2 to give us 4, so both bottom numbers would be 4.
Remember: if you multiply the bottom by 2, you do the same thing to the top:
So += + =
Q4: Find ‐
Again, you need the bottom numbers to be equal before you can proceed.
You can multiply the bottom 3 by 8 to give 24, then the bottom numbers
would be the same. If you multiply the bottom by 8, do the same to the top.
So ‐ = ‐ =
L1-2 Functional Maths and Numeracy study guide Fractions – multiplying
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 38 of 110
MULTIPLYING WITH FRACTIONS
A UNIT FRACTION is a fraction where the TOP NUMBER is 1.
Fractions like are ALL UNIT FRACTIONS.
Q1: Find of 100.
This is asking you to find one fifth of 100. To find a fifth, you divide 100 into
five fifths. 100 5 = 20
So of 100 = 20
Q2: What is x 100?
As with any multiplication, x 100 means 100 lots of .
One fifth + one fifth + one fifth +... etc ...+ one fifth = one hundred fifths = .
= 100 ÷ 5
So x 100 = 20
NB Look at Q1 and Q2 – the answers are identical. “Find a fraction OF” a
number means the same as that fraction MULTIPLIED by that number.
When finding a FRACTION OF something, “OF” means “x”
L1-2 Functional Maths and Numeracy study guide Fractions – multiplying
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 39 of 110
Examples
of 20 is the same as x 20. This means twenty quarters, .
of 300 is the same as x 300. This means three‐hundred thirds, .
It works the other way around: both x 100 and mean x 100
Q3: Find of £80.
This question is asking you to divide the £80 into four quarters and to calculate
the value of three quarters.
To find a fraction of a number first divide the number given (£80) by the
number under the fraction line (in this question it is 4).
£80 4 = £20
This tells you that one quarter = £20
However, you want 3 quarters, so multiply the answer by 3.
20 x 3 = £60
The answer to of £80 is therefore £60.
L1-2 Functional Maths and Numeracy study guide Fractions – mixed numbers
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 40 of 110
MIXED NUMBERS
A mixed number is a number with two parts: a whole number part, and a
fraction part.
Examples
2 means two and a quarter. 1 means one and two‐thirds.
You can convert mixed numbers to fractions by looking at the fraction part.
Q1: Write 2 as a fraction.
HALVES are the fraction, so you have to think in halves.
TWO HALVES make one whole. There are 2 wholes, which is 2 + 2 = 4 halves.
There is also an extra half (2 = two AND a half), which is 5 HALVES.
L1-2 Functional Maths and Numeracy study guide Fractions – mixed numbers
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 41 of 110
Q2: Write 4 as a fraction.
Here you’re dealing with thirds, so you must think in thirds.
4 means four AND two thirds.
NB
You might spot a pattern. Look at the above 2 examples.
2 = The top number, 5, equals (2 x 2) + 1.
4 = The top number, 14, equals (4 x 3) + 2.
For any mixed number, where A, B and C are numbers:
L1-2 Functional Maths and Numeracy study guide Decimals – introduction
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 42 of 110
DECIMALS
When a number is in decimal form it consists of whole numbers and a fraction
part (parts of that number).
The fraction part is to the right of the decimal point. If this is zero, it means
that there is no fraction part. 7 = 7.0 = 7.00 = 7.000 = 7.000
13 = 13.0 = 13.00 = 13.000 and so on.
The zero AFTER a decimal point can be knocked off, as long as there are NO
NON‐ZERO NUMBERS after the zero.
Examples
1.5700 = 1.57 ‐ these 0s can go since there’s nothing after them.
The 0 in 1.206 CAN NOT be removed, because there is a 6 after the 0.
4.00230 = 4.0023 ‐ There is a 2 and 3 after the first 0s, so those 0s stay.
Q1. Put these decimal numbers into the correct order, from the lowest to
the highest value.
7.6, 8.1, 6.9, 7.3, 7.9
Look at the whole numbers first:
‐ There is one decimal that begins with 6 so this will be the lowest
value decimal 6.9
‐ There are three decimals beginning with a 7 (7.6, 7.3 and 7.9). As
there are several decimals beginning with a 7 you then need to look
at the fraction part and put them into order from low to high. This
will give you an order of 7.3, 7.6, 7.9
‐ The final decimal in the list begins with an 8 and is therefore the
highest decimal, 8.1.
The answer to this question is therefore:
6.9, 7.3, 7.6, 7.9, 8.1
L1-2 Functional Maths and Numeracy study guide Decimals – multiplying and dividing by 10, 100, 1000.
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 43 of 110
HOW TO DIVIDE AND MULTIPLY DECIMALS BY 10, 100 OR 1000
When multiplying decimal numbers the decimal point should be moved
to the right to make the number bigger.
When dividing decimal numbers the decimal point should be moved to
the left to make the number smaller.
You should move the decimal points as many times as there are zeros in
the number you are multiplying by.
So by 10 – move once
by 100 – move twice
by 1000 – move three times
Q1. Show how to divide and multiply the decimal 24.31
Move the decimal point to
the left
Move the decimal point to
the right
DECIMAL 10 100 1000
24.31 2.431 .2431 .02431
DECIMAL
24.31 243.1 2431.00 24310.00
L1-2 Functional Maths and Numeracy study guide Decimals – multiplying
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 44 of 110
MULTIPLYING DECIMALS by other numbers (not 10, 100, 1000, etc.)
Decimals are best treated as whole numbers when multiplying.
Keep count of how many digits the decimal point(s) is in front of, then put the
decimal back in at the end when you have your answer.
Q1: What is 6 x 1.8?
Here there is only one decimal – 6 does not have a decimal.
The decimal point is in front of ONE DIGIT – the 8.
Now, imagine any decimal numbers are WHOLE NUMBERS. 1.8 becomes 18.
The question is transformed by doing this: 6 x 1.8 6 x 18
You now do 6 x 18 in the usual way:
Then you PUT THE DECIMAL POINT BACK IN.
There was one decimal point which was in front of one digit, so in your final
answer, you must put the decimal back in front of one digit:
So 6 x 1.8 = 10.8
L1-2 Functional Maths and Numeracy study guide Decimals – multiplying
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 45 of 110
Q2: What is 11 x 0.0015?
Again there is only one decimal, but this time it is in front of FOUR DIGITS –
0015
Again, you imagine any decimal numbers are whole numbers.
0.0015 becomes 15. 11 stays the same – it is already a whole number.
11 x 0.0015 11 x 15
Now do 11 x 15 in the usual way:
Then, PUT THE DECIMAL POINT BACK IN.
There was one decimal point which was in front of four digits, so in your final
answer, you need to put the decimal back in front of four digits.
The decimal “jumps over” the 5, the 6, the 1, then JUMPS OVER NOTHING for
the fourth digit. “Nothing” in maths is written as 0.
So, the answer to 11 x 0.0015 is 0.0165
L1-2 Functional Maths and Numeracy study guide Decimals – multiplying
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 46 of 110
Q3: What is 0.16 x 10.5?
There are two decimal numbers.
One decimal is in front of TWO DIGITS (The 1 and 6 in 0.16)
One decimal is in front of ONE DIGIT (The 5 in 10.5 )
IN TOTAL, THIS IS 2 + 1 = 3 DIGITS.
Now think of the numbers as whole numbers, without any decimals.
0.16 x 10.5 16 x 105
Again, you do 16 x 105 in the usual way:
The decimal points were in front of a total of three digits, so in your final
answer, you must put the decimal point back in front of three digits.
So the answer to 0.16 x 10.5 is 1.680
Because the last digit is a 0 and it comes after the decimal, you can knock it off
if you want to.
The answer is 1.680 , or if you like, 1.68
L1-2 Functional Maths and Numeracy study guide Decimals – dividing, and converting fractions to decimals
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 47 of 110
FRACTIONS TO DECIMALS, AND DIVIDING WITH DECIMALS
Fractions and divisions are closely linked.
Q1: What is as a decimal?
means 1 split into 4. It means 1 ÷ 4.
If the question was something like 4 ÷ 2 it would be much easier!
With 1 ÷ 4, though, there will be remainders.
You solve this by adding extra 0s to the number you are dividing:
1 = 1.0 = 1.00 = 1.000 = 1.0000 and so on. Just as many 0s as you need!
You then carry out the division, being sure to LINE UP THE DECIMAL POINTS:
So (which is the same as 1 ÷ 4) = 0.25 as a decimal.
Q2. What is 4.2 ÷ 0.08 ?
Something like 6 ÷ 2 is the same as (six halves, which is three.)
So 4.2 ÷ 0.08 can be written as .
.
Then you can use equivalent fractions to get rid of awkward decimals.
Multiplying by 10, 100, 1 000 and so on is an easy way to get rid of decimals.
This tells you that 4.2 ÷ 0.08 is the same thing as 420 ÷ 8.
L1-2 Functional Maths and Numeracy study guide Decimals – dividing, and converting fractions to decimals
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 48 of 110
You can now do this division in the usual way.
The bottom number goes on the outside:
So 4.2 ÷ 0.08 = 52.5 as a decimal.
Q3: What is 8 ÷ 0.25 ?
Similar to before, you can write 8 ÷ 0.25 as .
Then use the rules of equivalent fractions to change it into a “nicer” fraction:
So 8 ÷ 0.25 is the same as 32 ÷ 1 , which is 32.
It is much easier to divide by a whole number than a decimal.
So, as a general rule:
WHEN DIVIDING BY A DECIMAL, REWRITE THE DIVISION QUESTION AS A FRACTION, AND CHANGE IT INTO A FRACTION WITH WHOLE NUMBERS
L1-2 Functional Maths and Numeracy study guide Decimals – dividing, and converting fractions to decimals
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 49 of 110
Q4. What is two thirds as a decimal?
Two thirds written as a fraction is . This means 2 ÷ 3.
Again, you can write 2 as 2.0000 ... if you need to.
This would go on forever!
= 0.6666666...
You can ROUND your answer to make a reasonable approximation.
= 0.67 to the nearest hundredth.
You round the 6 hundredths up to 7 hundredths, because the number to the
right of it was 5 or bigger.
L1-2 Functional Maths and Numeracy study guide Decimals – dividing, and converting fractions to decimals
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 50 of 110
Q5: Find of 27.
The best start would be to find of 27, which is the same as 27 ÷ 5:
So of 27 = 5.4
But you want ths which is four times as much, so you need to multiply by 4:
5.4 x 4 54 x 4
(Remember, first take the decimal point out, then replace it):
There was only one decimal point which was in front of 1 number (the 4).
So you now put the decimal point back in front of one number:
So of 27 = 21.6
L1-2 Functional Maths and Numeracy study guide Percentages – introduction, converting percentages to fractions
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 51 of 110
PERCENTAGES
PERCENTAGE MEANS “OUT OF ONE HUNDRED”
It is important to remember this.
Examples
= 80%
= 3%
. = 7.908%
= 1 000%
Using this fact, it is very easy to change from a percentage to a decimal:
Q1: What is 40% as a fraction?
40% means 40 OUT OF 100, which is written as .
You can now use what you know about simplifying fractions to make the
fraction simpler:
So, 40% = =
L1-2 Functional Maths and Numeracy study guide Percentages of amounts
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 52 of 110
Percentages of Amounts
Many questions will ask you to work out the percentage of a given value. The
percentages of values can be broken down piece by piece.:
Examples
100% is one whole, = 1
50% = half of a 100% = half of one whole =
25% = half of 50% = half of one half =
10% = 10 out of 100 = divide top and bottom by 10
5% = 5 out of 100 = divide top and bottom by 5
1% = 1 out of 100 =
Using these “pieces” you can find any percentage you want.
Q1: What is 75% of 300?
75% = 50% + 25%
From above, you know that 50% = and 25% = . So, 75% = +
75% of 300 = of 300 + of 300
of 300 = 300 ÷ 2 = 150
of 300 = 300 ÷ 4 = 75
So 75% of 300 = 150 + 75 = 225
You could have done this any number of ways. For example, you could have
worked out 1% of 300 (=3) then multiplied by 75. 3 x 75 = 225
L1-2 Functional Maths and Numeracy study guide Percentages of amounts
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 53 of 110
The same method can be used to calculate harder percentages:
Source: John Thompson A (2008). The Percentage worker‐outer. http://www.skillsworkshop.org/resources/percentage‐worker‐outer
L1-2 Functional Maths and Numeracy study guide Percentage changes
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 54 of 110
Percentage Changes
These questions fall into two categories:
1) You are given a value and have to change it by a certain percentage.
2) A given value has ALREADY been changed and you have to work out the
percentage change between the two values (start value and the end value).
Q1: Last year a flight to Egypt for two people cost £500. This year the price
has increased by 80%. What is the total price for two people THIS YEAR?
This question is saying the price has increased by 80% OF THE START PRICE.
You therefore need to find 80% of 500, and then add this to £500.
80% = = = . So, you need to find FOUR FIFTHS OF 500.
of 500 = 500 ÷ 5 = 100.
ths of 500 will be four lots of this. So (=80%) of £500 is £400.
Remember, though – the question is asking what is £500 PLUS AN EXTRA 80% ,
NOT what is 80% of £500.
So, £500 + 80% = £500 + £400 = £900.
Notice how you worked out 80% OF THE START PRICE. Always start with
the first price, or first value.
Q2: A Shop in town is having a sale. The banner reads “25% OFF ALL ITEMS!”.
Before the sale, a dress cost £80. How much will it cost in the sale?
The question is saying the price has fallen by 25% OF THE START PRICE
You therefore need to find 25% of £80 and then subtract this from £80.
25% = = so you need to find ONE QUARTER OF 80.
of 80 = 80 ÷ 4 = 20.
So the sale price = £80 – 25% = £80 ‐ £20 = £60.
Again, you started by working out 25% OF THE START PRICE.
L1-2 Functional Maths and Numeracy study guide Percentage changes
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 55 of 110
Q3: A gas cylinder weighs 5kg. When filled with gas it weighs 6kg. What is
the percentage increase in the weight of the cylinder once the gas is added?
You must calculate the PERCENTAGE CHANGE (in this case, the percentage
increase). Like before, you start by using the START VALUE.
For any question asking you to work out a % increase or % decrease:
PERCENTAGE CHANGE = ( X 100 ) %
In this question:
START VALUE = 5kg
FINAL VALUE = 6kg
This change is therefore an INCREASE by 1kg.
Using the formula above:
PERCENTAGE INCREASE = (
X 100) %
= ( X 100) %
= 20%
So the percentage increase in the weight of the cylinder is 20%.
You can check this is correct by rethinking the question:
The empty weight of the cylinder is 5kg. What if I Increase it by 20%? If my
answer is right, this should make the weight 6kg as the question says.
20% = = = of 5 = 5 ÷ 5 = 1
So 5kg + 20% = 5kg + 1kg = 6kg. This proves the answer is right.
L1-2 Functional Maths and Numeracy study guide Percentage changes
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 56 of 110
Q4: Katie has been on a diet for 3 months. Her starting weight was 12 stone.
She now weighs 10 stone. By what percentage has her weight decreased?
Again, remember:
PERCENTAGE CHANGE = (
X 100) %
In this question:
START VALUE = 12 STONE
FINAL VALUE = 10 STONE
This change is therefore a decrease by 1 stone, or 1.5 stone in decimals.
PERCENTAGE DECREASE = (
X 100 ) %
= . X 100.
. Looks awkward – but you can simplify it using equivalent fractions:
. = =
So % Decrease = . X 100
= X 100
=
So the percentage decrease = 12.5%.
Her weight has decreased by one‐eighth.
Functional Maths and Numeracy study guide Converting between fractions, decimals and percentages
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 57 of 110
CONVERTING BETWEEN FRACTIONS, DECIMALS AND PERCENTAGES
FRACTIONS DECIMALS
You can go from fractions to decimals by direct division:
So = 0.75
FRACTIONS PERCENTAGES
Once you have turned the FRACTION into a DECIMAL, you then MULTIPLY BY
100 to find out the percentage.
This works because decimals and fractions show PARTS OF ONE WHOLE. A
percentage tells us PARTS OF ONE HUNDRED.
Multiply the decimal by 100 by moving the decimal point 2 DIGITS TO THE RIGHT:
So = 0.75 = 75%
DECIMALS PERCENTAGES
Multiply the decimal by 100 to find the percentage
So 0.125 = 12.5%
Functional Maths and Numeracy study guide Converting between fractions, decimals and percentages
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 58 of 110
DECIMALS FRACTIONS
Once the decimal is converted into a percentage, use the fact that “% means
OUT OF 100” to convert the percentage into a fraction. Then simplify that
fraction, if possible:
So 0.125 = 12.5% =
PERCENTAGES FRACTIONS
Percentage means “out of 100”, so A PERCENTAGE CAN BE WRITTEN AS A
FRACTION OUT OF 100. This fraction may then be simplified:
So 88% =
PERCENTAGES DECIMALS
You DIVIDE BY 100 to go from a percentage to a decimal. This means moving
the decimal point 2 DIGITS TO THE LEFT:
So 8.4% = 0.084
Functional Maths and Numeracy study guide Rounding whole numbers
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 59 of 110
ROUNDING
Rounding can be useful when making approximations (also called estimations).
We round all the time without thinking about it.
How many people live in the UK?
“I bet it’s about 62 million” – this is rounding the nearest million.
How many were at Wembley for that Concert?
“I think the news said 120 600” – this is rounding to the nearest hundred.
When rounding, it is helpful to think of the number in “Hundreds, Tens, Units”
form.
ROUNDING TO THE NEAREST 1, 10, 100, 1 000, 10 000 AND SO ON
When rounding to the nearest whole number, or a number ending in zero (10,
100, 1 000 and so on) think of the number in terms of “hundreds, tens, units”.
Here is the number 9 605 872 written in this way:
Functional Maths and Numeracy study guide Rounding whole numbers
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 60 of 110
Q1: A total of 37 894 people competed in a Marathon. How many
is this to the nearest hundred?
You are rounding to the nearest 100. First of all write out the number as
hundreds, tens, units and so on:
The 100s column is underlined because you are rounding to the nearest 100.
Now look at the digit TO THE RIGHT of what you’re rounding to:
This digit tells you how to round the hundreds column you’re concerned with:
IF THE DIGIT IS 5 OR MORE, ROUND UP BY 1 IF THE DIGIT IS LESS THAN 5, DON’T ROUND UP!
Since 9 is bigger than 5, you ROUND UP.
The 8 is rounded up by 1, and becomes 9.
ALL DIGITS TO THE LEFT OF IT BECOME ZEROS.
So, 37 894 rounded to the nearest hundred is 37 900
Functional Maths and Numeracy study guide Rounding whole numbers
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 61 of 110
Q2: What is 192 to the nearest 10?
You can write out 192 in hundreds, tens and units.
The “9” is how many tens you have, and TO THE RIGHT is the “2”:
2 is less than 5, so you DO NOT change the 9. Any numbers to the left of the
“9” become zero.
So, 192 to the nearest 10 is 200.
Q3: What is 195 to the nearest 10?
Because
the number TO THE RIGHT of the tens column is 5, you ROUND UP.
9 is rounded up by 1 to 10. Because 10 is 2 digits, the rounding up is done by
“carrying” the 1 over to the left.
The “9” becomes “0” and the “1” has 1 added to it, to become 2.
So, 195 to the nearest 10 is 200.
IF THE DIGIT IS 5 OR MORE, ROUND UP BY 1
IF THE DIGIT IS LESS THAN 5, DON’T ROUND UP!
IF THE DIGIT IS 5 OR MORE, ROUND UP BY 1
IF THE DIGIT IS LESS THAN 5, DON’T ROUND UP!
Functional Maths and Numeracy study guide Rounding decimals
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 62 of 110
Q4: What is 10.108 to the nearest hundredth?
Now you are being asked to round to a decimal amount. Again, though, you
can use the same idea as before and put the number in hundreds, tens and
units:
The DECIMAL POINT separates the whole part from the “fraction part” of the
number. To the left of the decimal point is a whole number, and to the right is
a part of a whole.
Underline the hundredths, and look at the digit TO THE RIGHT:
The 8 is bigger than 5 so you ROUND UP. The “0” becomes a “1”, and all
numbers to the right of it become zero.
So, 10.108 to the nearest hundredth is 10.110
Because the last 0 is unnecessary, you must simplify this to just 10.11
Functional Maths and Numeracy study guide Rounding decimals
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 63 of 110
Q5: A shop owner is calculating the price per unit of sweets in
pounds. He uses his calculator and gets 0.177777777777…
What is this to the nearest penny?
Since this is in pounds, the calculator is saying £0.1777777777…
The number TO THE RIGHT of the pennies column is 7, so you ROUND UP.
The “7” becomes an “8”.
So, £0.177777777… to the nearest penny is 18p.
Functional Maths and Numeracy study guide Rounding decimals
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 64 of 110
Q6 (HARD!): A jogger does a warm‐up run. He calculates that he has
run 8.156 km. How far is this to the nearest 10m?
The units you are using are kilometres.
1km = 1000 m
To go from km m, you multiply by 1000, so move the decimal place TO THE
RIGHT by 3 DIGITS:
So 8.156km = 8156m
You can now round this to the nearest 10m in the usual way:
The “6” is 5 or more, so the underlined 5 is ROUNDED UP to 6.
So, 8 156m to the nearest 10m is 8 160m
8 160m = 8.160 km (dividing by 1 000 to go back to kilometres)
The last 0 is unnecessary.
So IN KILOMETRES, 8.156km to the nearest 10m = 8.16km
Functional Maths and Numeracy study guide Rounding - alternative method
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 65 of 110
You can also think of rounding in an entirely different way…
Q1: What is 3 088 to the nearest 100?
You’re rounding the nearest 100. So, think of MULTIPLES OF 100.
Which multiple of 100 is 3 088 closest to?
Multiples of 100 are the 100 times table: 100, 200, 300, 400 …
(fast forward a bit!) … 2 999, 3 000, 3 100.
3 088 is between 3 000 and 3 100.
3 088 is 88 AWAY from 3 000, but only 12 AWAY from 3100.
So, 3 088 to the nearest 100 is 3 100.
Q2: A care’s mileage reads “107 873”. How many miles is this to
the nearest 10 000 miles?
Here you’re rounding the nearest 10 000. So you need to think in MULTIPLES
OF 10 000.
10 000, 20 000, 30 000, 40 000… …100 000, 110 000.
107 873 is between 100 000 and 110 000.
105 000 would be EXACTLY HALF‐WAY between 100 000 and 110 000.
So, 107 783 is MORE THAN HALF WAY.
So, 107 783 miles to the nearest 10 000 miles is 110 000 miles.
Functional Maths and Numeracy study guide Rounding to more difficult limits
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 66 of 110
A big benefit of this method is that it can be used to round to more difficult
limits, like quarters, halves, and so on.
Q3: What is 3.68kg to the nearest quarter of a kilogram?
= 1 4 = 0.25 So a quarter of a kilogram = 0.25 kg.
Because you’re rounding to the nearest quarter, think in MULTIPLES OF ONE
QUARTER.
0.25, 0.50, 0.75, 1.00, 1.25, 1.50, … … 3.00, 3.25, 3.50, 3.75.
3.68 is between 3.50 and 3.75.
3.68 is greater than 3.50 by 0.18, but it is only 0.07 smaller than 3.75.
So, 3.68 is closer to 3.75 than 3.50
So 3.68 to the nearest quarter is 3.75
Functional Maths and Numeracy study guide Ratio
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 67 of 110
RATIO
When a number is divided into different parts it can be described as a ratio.
Examples:
Q1: If Tom and Harry are given £20 to divide in the ratio 3:2 how
much do they each receive?
Look at the order of the question – Tom, Harry. Then 3:2
TOM HARRY
3 2
Add the ratios together to calculate how many parts the £20 is to be
divided into altogether. 3 + 2 = 5 so 5 parts in total.
5 parts = £20. So how much is one part equal to?
20 5= 4
So each part represents £4
Now look again at the question to tell you how the money is to be
divided.
Tom gets 3 parts and Harry gets 2 parts.
You know that 1 part = £4 so now calculate Tom and Harry’s share:
Tom = £4 X 3 = £12
Harry = £4 X 2 = £8
So to share £20 in the ratio of 3:2 – Tom gets £12 and Harry gets £8.
Functional Maths and Numeracy study guide Ratio
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 68 of 110
Q2: Read the instructions on the paint tin. How much white paint
should you mix with 500ml of red paint to get a tin of pink paint?
Now look at the question in red above.
How much white paint do you need to make a tin of pink paint when
using 500ml of red paint?
The 500ml of red paint represents 1 part of the total tin of pink paint.
red 1:4 white
Remember you need 5 parts to make a full tin so you now need an extra
4 parts of white paint.
You know that 1 part equals 500ml so to calculate the other 4 parts you
need to multiply the 500ml by 4.
500 x 4 = 2000ml
1000ml = 1 litre
So 2000ml = 2 litres
So you need 2000ml (= 2l) of white paint.
Functional Maths and Numeracy study guide Ratio
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 69 of 110
Another Method
Q2: Read the instructions on the paint tin. How much white paint
should you mix with 500ml of red paint to get a tin of pink paint?
Another way of thinking of this is that for
every one lot of red, there are four lots of
white.
If you had two lots of red (1+1) we’d need
eight lots of white(4+4):
RED WHITE
1 1+1+1+1 = 4
5 5+5+5+5 = 20
500 500+500+500+500 = 2000
So for 500ml red you need 2000ml (=2l) of white.
NB
Because ratios are like fractions, you could also treat this like a fraction
problem:
= = = . So 2000ml white to go with 500ml red
MIX 1 PART RED
WITH 4 PARTS
WHITE
Functional Maths and Numeracy study guide Ratio
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 70 of 110
Q3: An artist takes 60 paintings to be displayed at an exhibition. He
displays them in the following ratio:
How many portrait paintings will he take?
Here, you need to “see” that the TOTAL OF ALL THE RATIO IS IMPORTANT.
In this case, the total represents the total number of paintings:
12 : 3 : 5 12 + 3 + 5 = Total of 20
But the total number of paintings the artist is taking is 60.
THIS IS THREE TIMES AS MANY AS 20:
LANDSCAPE PORTRAIT STILL LIFE TOTAL
12 3 5 20
x by 3 x by 3 x by 3 x by 3
36 9 15 60
So he takes 36 landscapes, 9 PORTRAITS, and 15 still life paintings.
Ratio is used in a wide variety of problems, including conversions and scale
drawings…
Functional Maths and Numeracy study guide Ratio – conversions
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 71 of 110
CONVERSIONS
Q1: A builder is measuring a panel. He needs it to be 35cm long.
If 1 inch = 2.5 centimetres, how long will the panel be in inches?
Method 1
For every 1 inch, there are 2.5 centimetres. As a ratio this is 1:2.5
So, if there were 2 inches, this would be 5 centimetres, and so on…
inches 1 2 4 10 14 cm 2.5 5 10 25 35
So 35cm = 14”
Method 2
Remember, ratios are very much like FRACTIONS:
= . x top & bottom by 2 x top & bottom by 7
So 35 centimetres = 14 inches.
Method 3
The ratio of inches to centimetres is 1:2.5
So, the number of centimetres is found by multiplying the inches by 2.5.
Therefore, THE AMOUNT OF INCHES IS FOUND BY DIVIDING THE CMs BY 2.5
So number of inches = 35 2.5 = . = = 14
Functional Maths and Numeracy study guide Ratio – conversions
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 72 of 110
Q1: An architect is constructing a scale model of a theatre.
The scale of the model is 1:50 .The length of the theatre is 20m.
What will be the length of the model?
Obviously, any scale model will be smaller than the real thing!
So, THE SMALLER NUMBER REPRESENTS THE MODEL, THE LARGER NUMBER
REPRESENTS THE REAL THING. This tells you that the theatre will be 50 times
bigger than the model, and the model will be th the size of the theatre.
Method 1
The length of the model will be the length of the theatre.
Length of model =
=
=
= = 40cm
Method 2
Remember, ratios are like FRACTIONS. To avoid nasty decimals, you can work
with centimetres:
= = = =
So for a theatre length of 2 000cm (= 20m) the length of the model is 40cm.
Functional Maths and Numeracy study guide Ratio – conversions
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 73 of 110
Q2: A plan of a house is drawn on paper.
The scale of the plan is 1:25.
On the plan, the chimney is 24cm above ground level.
How much above ground level is the ACTUAL CHIMNEY?
The scale this time is 1:25. Again, the plan of a house will be smaller than the
actual house! This tells us the actual house will be 25 times bigger than the
plan, and the plan will be the size of the house.
Method 1
The chimney’s height will be 25 times greater than its height on the plan:
So the actual chimney’s height is 600cm, or 6m.
Method 2
Remember, ratios are like FRACTIONS. To avoid nasty decimals, you can work
with centimetres:
= = = .
So a chimney height of 24cm on the plan, will have an actual height
of 600cm (=6m).
Functional Maths and Numeracy study guide Ratio – conversions
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 74 of 110
Q3. A family are travelling across Europe. One day in their car they
cover a total distance of 320km.
How far is this journey in miles? Take 5 miles to equal 8 kilometres.
The information in the question tells you that the ratio of miles to kilometres is 5:8
Method 1
Using the fact that ratios are like fractions, = .
This tells us that the number of miles is the number of kilometres.
They have travelled 320km.
thof 320 = 320 8 = 40
So ths of 320 = 5 x 40 = 200
So 320 km = 200 miles.
Method 2
Again, treating the ratio like a fraction, you can find out how many miles are
travelled by using equivalent fractions:
= = = =
So a distance of 320 kilometres is the same as 200 miles.
Functional Maths and Numeracy study guide Ratio – scale drawings
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 75 of 110
SCALE DRAWINGS
A SCALE DRAWING is a drawing or diagram that is IDENTICAL IN PROPORTION to the thing it is representing, but is a DIFFERENT SIZE.
This sounds more complicated than it actually is!
Example
Imagine a pitch, 20m long by 10m wide (so the length is DOUBLE the width).
A SCALE DRAWING of the pitch could be a rectangle 20cm long by 10cm wide.
The PROPORTIONS of the field AND the drawing of it are the same – the length
is DOUBLE the width in each case.
However, they are DIFFERENT SIZES: 20m x 10m compared to 20cm x 10cm.
1m = 100cm, so the length of the ACTUAL FIELD is 100 TIMES BIGGER than the
length of the plan.
Because of this, you would say the SCALE OF THE PLAN is 1:100
On the DRAWING OF THE PLAN, you could instead have said something like,
“1cm represents 1m”
So the 20cm length represents the ACTUAL LENGTH of 20m on the pitch and
the 10cm width represents the ACTUAL WIDTH of 10m on the pitch.
You will ALMOST ALWAYS be told the scale of the drawing next to the drawing.
This is needed so you can work out the ACTUAL SIZE, or ACTUAL DISTANCE, of
the real thing.
Questions involving scale drawings MIGHT need a RULER.
Functional Maths and Numeracy study guide Ratio – scale drawings
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 76 of 110
Q1: A builder is laying some square decking.
He uses a scale drawing:
What is the actual length of decking?
Here is a scale drawing and the LENGTH HAS BEEN GIVEN TO YOU. You don’t
need to measure anything yourself.
It says “Scale: 2cm to 1m”. The scale drawing (of anything!) will be smaller
than the real thing, so the SMALLER VALUE (2cm) represents the DRAWING,
and the LARGER VALUE (1m) represents the ACTUAL SQUARE DECKING.
So, the ratio of the drawing to the decking is 2cm : 1m.
Using the fact ratios are like fractions:
= =
So for a drawing length of 10cm, in the diagram above, represents
an ACTUAL LENGTH OF DECKING of 5m.
Functional Maths and Numeracy study guide Ratio – scale drawings
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 77 of 110
Q2: The diagram shows a plan of a surgery waiting area:
What is the actual length of the waiting area?
Because you have been told no lengths, and you need to find out the length,
you need to MEASURE THE SCALE DRAWING WITH A RULER:
The length of the PLAN is 12cm. You were told the scale is
2 centimetres = 1 metre (= 100 cm). So the ratio of plan to room is 2:100
= =
The scale drawing (above) measured 12cm. This tells you that a
drawing of 12cm represents an actual LENGTH OF 6m.
Functional Maths and Numeracy study guide Ratio – scale drawings
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 78 of 110
Q3. The map below shows part of the route of a marathon race.
The starting point is Point A.
What is the actual distance from Point A to Point B on the road?
Functional Maths and Numeracy study guide Ratio – scale drawings
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 79 of 110
The only thing you have been given is the scale 1:25 000. You have to measure
the scale drawing yourself. Measure the line from A to B:
This measures 5cm.
You know the scale is 1: 25 000.
The map will be smaller than the actual road!
So, it MAKES SENSE that the “1” represents the map, and “25 000” the road.
You can again use the fact that ratios are like fractions:
=
=
So 5cm on the map represents an ACTUAL LENGTH of 125 000cm
100cm = 1m 125 000cm = (125 000 100) m = 1250m
So in more reasonable units, the actual distance is 1 250m.
(This is just short of a mile).
NB If your answer came to thousands of miles, would this be realistic? THINK!
Functional Maths and Numeracy study guide Negative numbers - introduction
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 80 of 110
NEGATIVE NUMBERS
This number 8 is often mistaken for a Negative Number, because he can have a
negative attitude. 8 isn’t negative – he’s just outspoken.
When we say “Negative Number”, we mean something quite different:
The numbers in RED are known as POSITIVE NUMBERS.
The numbers in BLUE are known as NEGATIVE NUMBERS.
A negative number always has a MINUS SIGN in front of it.
You see negative numbers all the time in life.
On weather forecasts, cold temperatures are MINUS NUMBERS (Blue = cold!)
‐7 °C, ‐2 °C, ‐1 °C All very cold!
Minus numbers are also used with banking.
If you have £10 in your account, and withdraw £15, you are £5 OVERDRAWN.
This is the same as saying you have ‐£5.
Functional Maths and Numeracy study guide Negative numbers – addition and subtraction
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 81 of 110
Minus numbers are the EXACT OPPOSITES of their positive number counterparts
‐1 is opposite to 1
‐2 is opposite to 2
‐59 is opposite to 59
And so on.
‘ADDING ON’ A NEGATIVE NUMBER
First of all, let’s see if you can spot a pattern.
4 + 3 = 7 4 + 2 = 6 4 + 1 = 5 4 + 0 = 4
The number you are adding to 4 is getting smaller by 1 each time.
As a result, the answer is becoming smaller by 1 each time.
So – FOLLOWING THE PATTERN – what will come next?
You need to add one less than 0. This is ‐1.
The answer will be 1 smaller than the last answer. This is 3. So the pattern will
continue:
4 + 3 = 7 4 + 2 = 6 4 + 1 = 5 4 + 0 = 4 4 + ‐1= 3 (4 – 1 = 3) 4 +‐2 = 2 (4 – 2 = 2) 4 +‐3 = 1 (4 – 3 = 1) 4 +‐4 = 0 (4 – 4 = 0) …
Notice how the answers in brackets are the same as the answers to the left.
ADDING A MINUS NUMBER IS DONE AS A NORMAL SUBTRACTION
Functional Maths and Numeracy study guide Negative numbers – addition and subtraction
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 82 of 110
Q1: What is 27 + ‐12?
Using our rule, 27 +‐12 = 27 – 12 = 15
Further Explanation
Remember: Minus numbers are the EXACT OPPOSITES of the ‘normal’
numbers.
So ‐12 is the opposite of 12.
Use this to help.
Imagine the question was “What is 27 + 12?”
You’d just ADD THE 12. The answer is 39.
BUT in Q1 above… you’re not adding 12. You’re adding MINUS 12, which is the
OPPOSITE.
So, YOU DO THE OPPOSITE.
The opposite of adding 12 is SUBTRACTING 12.
So, 27 + ‐12 = 27 – 12 = 15.
If you are ever confused with adding negative numbers, remember that:
Minus numbers are the EXACT OPPOSITES of their positive number counterparts
And as a result of this, adding a minus number has the OPPOSITE EFFECT of
“normal” addition.
The OPPOSITE EFFECT OF “NORMAL” ADDING is SUBTRACTING.
Which is why
ADDING A MINUS NUMBER IS DONE LIKE NORMAL SUBTRACTION
Functional Maths and Numeracy study guide Negative numbers – addition and subtraction
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 83 of 110
‘TAKING AWAY’ A NEGATIVE NUMBER
Subtraction tells you the DISTANCE BETWEEN TWO NUMBERS.
What is the distance between 5 and 4?What is 5 – 4?
The answer in both cases is 1.
What is the distance between 21 and 15?What is 21 – 15 ?
The answer in both cases is 6.
So when you need to subtract, think “what is the distance between the two
numbers?”
Q1: What is 4 ‐ ‐1?
You can think “What is the difference between 4 and ‐1?”
Using a NUMBER LINE makes it easier:
There is a distance of 5, so 4 ‐ ‐1 = 5.
You can also see this by looking for a pattern as you subtract numbers from 4:
4 – 3 = 1 4 – 2 = 2 4 – 1 = 3 4 – 0 = 4 4 ‐ ‐1 = 5
As the number you are subtracting from 4 gets SMALLER BY 1 each time, the
answer follows the pattern of getting BIGGER BY 1 each time.
So, continuing the pattern, 4 ‐ ‐2 would be 6. Check it with a number line!
The distance between ‐2 and 4 is 6.
Functional Maths and Numeracy study guide Negative numbers – addition and subtraction
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 84 of 110
Q2: What is 1 ‐ ‐5?
Use a number line, and again consider the distance between ‐5 and 1:
There is a distance of 6, so 1 ‐ ‐5 = 6.
Further explanation
If ever confused with adding negative numbers, remember that:
Minus numbers are the EXACT OPPOSITES of their positive number counterparts
And as a result of this, subtracting a minus number has the OPPOSITE EFFECT
of “normal” subtraction.
The OPPOSITE EFFECT OF “NORMAL” SUBTRACTION is ADDING, which is why
SUBTRACTING A MINUS NUMBER IS DONE LIKE NORMAL ADDITION
Summary:
ADDING A MINUS NUMBER = SUBTRACTION
SUBTRACTING A MINUS NUMBER = ADDITION
Functional Maths and Numeracy study guide Negative numbers – addition and subtraction
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 85 of 110
ADDING TO, OR SUBTRACTING FROM, A NEGATIVE NUMBER
You can think of adding to/subtracting from ANY NUMBER on a number line.
Let’s start with something straight‐forward:
What is 5 + 3?
5 + 3 is obviously 8, but let’s think about it on a number line:
When you add, start at your first number then MOVE TO THE RIGHT by the amount of the number you are adding.
When subtracting, you just move to the left!
When you subtract, start at your first number then MOVE TO THE LEFT by the amount of the number you are subtracting.
Functional Maths and Numeracy study guide Negative numbers – addition and subtraction
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 86 of 110
What is 1 ‐ 3?
So, 1 – 3 = ‐2.
What is ‐2+ 8?
Functional Maths and Numeracy study guide Range
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 87 of 110
AVERAGES and RANGE
The RANGE
THE RANGE of a set of numbers tells you the DIFFERENCE between the
SMALLEST VALUE and the LARGEST VALUE.
It’s not too different to real life, really!
Example
“Here at Mobiles‐4‐U we have a HUGE RANGE of price plans on our phones,
FROM £7.50/month standard plan TO £30/month with all‐you‐can‐eat
browsing!”
What the salesman is getting at is the DIFFERENCE in prices of the phone contracts. To find the difference, you subtract the LOWEST from the HIGHEST: £30 ‐ £7.50 = £22.50 And this is the RANGE of prices. For a set of numbers:
RANGE = HIGHEST VALUE – LOWEST VALUE
Q1: Find the range of this set of lengths:
5cm, 8cm, 9cm, 8cm, 6cm, 2cm, 5cm, 7cm, 6cm, 8cm, 7cm, 8cm
The LONGEST LENGTH is 9cm. The SHORTEST LENGTH is 2cm.
So, the RANGE is 9 – 2 = 7cm.
Functional Maths and Numeracy study guide Averages – mean, mode and median
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 88 of 110
CALCULATING AVERAGES
There is more than one type of average: mean, mode, and median.
The MEAN
To find the mean add all the values together then divide the answer my
how many numbers you have used.
The mean can take a while to work out because it involves ADDING
EVERYTHING UP: “THE MEAN IS MEAN!”
Q2: The number of calls made by Sally on her mobile, per day, over one
week is 3, 4, 0, 6, 8, 4, 3. What is the mean number of calls per day?
Mean =
= = = 4
Therefore, the mean number of calls Sally made over the week is 4.
The MODE is the most common value in a set of numbers
Q3: Find the mode of this set of numbers:
1,3,2,1,3,1,0,1,4,2,3,4,1,2,3.
0 appears once
1 appears 5 times
2 appears 3 times
3 appears 4 times
4 appears twice
The number 1 is the most common number. So the mode is 1
Things relating to the MODE are called MODAL. It’s the same thing.
NB It is possible for a set of data to have more than one mode.
MEAN =
Functional Maths and Numeracy study guide Averages – mean, mode and median
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 89 of 110
The MEDIAN is the middle value in an ordered list.
Q4: Find the median of this set of numbers:
1,3,2,1,3,1,0,1,4,2,3,4,1,2,3.
First PUT THE LIST IN ORDER, LOWEST TO HIGHEST:
0,1,1,1,1,1,2,2,2,3,3,3,3,4,4.
Count from either end of list towards the middle to find the middle value.
Seven numbers can be counted from either end to find the middle value of 2.
Therefore the median of this set of data is 2.
Functional Maths and Numeracy study guide Averages – mean, mode and median
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 90 of 110
Q5: Find the median of this set of numbers:
8, 6, 4, 1, 1, 12, 9, 1, 9, 8, 9, 4
Again, PUT THE NUMBERS IN ORDER:
1, 1, 1, 4, 4, 6, 8, 8, 9, 9, 9, 12
Again, count inwards towards the middle from both ends:
There are 2 middle numbers!
If there are two middle numbers the median is EXACTLY HALFWAY between these two numbers This is the same as adding the 2 numbers up then halving
6 + 8 = 14, then 14 ÷ 2 = 7.
7 is half‐way between 6 and 8;
The median is SEVEN
If both middle numbers are the same, the median is the same number:
Example Find the median of this set of numbers:
1, 3, 3, 4
There are two 3s in the middle. The Median is 3.
Functional Maths and Numeracy study guide Representing data – key vocabulary
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 91 of 110
REPRESENTING DATA
There are various ways to represent data, and some ways are better than others,
depending on what you want to show. Pages 93‐104 give you a summary of the
common ways to represent data, with some advantages and disadvantages to each.
First though, a note about language and definitions with graphs and charts:
Title tells you what the chart/graph is showing. Every graph should have a title.
The title goes at the TOP OF THE GRAPH – rarely at the bottom.
Horizontal Axis is a LINE ACROSS the PAGE, running directly left to right. The
axis should be labelled, so you know what it is measuring.
Vertical Axis is a LINE GOING UP THE PAGE (think vertigo – a fear of heights).
Key tells you WHAT THINGS MEAN in the graph. For example, a key might tell
you which line is for boys and which is for girls, or what each colour stands for.
Functional Maths and Numeracy study guide Representing data – discrete and continuous data
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 92 of 110
DISCRETE AND CONTINOUS DATA
Data can be thought of as being either discrete or continuous. Data has to be
ONE OR THE OTHER – IT CAN’T BE BOTH.
CONTINUOUS DATA
CONTINUOUS DATA is data that can “flow” from one value to another. Data
like this is also INFINITE – it can take be an endless number of different values.
Examples include:
SPEED WEIGHT TIME HEIGHT ENERGY
Height is continuous. A tree got to the height it is now by GRADUAL and
CONTINUAL growth from something small to something big.
Time is continuous. It FLOWS. You CAN NOT SAY FOR DEFINITE “It’s either 1
minute or 2 minutes” – what about 1½ minutes? Seconds? Milliseconds?
Billionths of a second? Time has endless values.
Continuous data is ALWAYS NUMERICAL, and for any 2 different continuous values, you can work out half‐way between them.
DISCRETE DATA
DISCRETE DATA is things that can be counted, with definite values. Examples:
Day of week (Mon, Tue, Wed, Thur, Fri, Sat, Sun)
Month (Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, Dec)
Sex of baby (Boy, Girl)
Favourite team (Man Utd, Arsenal, Liverpool, Huddersfield Town)
For any 2 different discrete values, it is often nonsense to work out what is
half‐way between them. What is half‐way between Monday and Tuesday?!! It
makes no sense! It’s EITHER Monday, OR it’s Tuesday.
Functional Maths and Numeracy study guide Representing data – bar charts
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 93 of 110
BAR CHARTS
A bar chart is made up of bars (like chocolate bars) with gaps between them:
Example 1
Example 2
Functional Maths and Numeracy study guide Representing data – bar charts
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 94 of 110
Bar Chart Facts
Has a HORIZONTAL AXIS AND VERTICAL AXIS. The horizontal (“bottom”)
axis DOES NOT HAVE TO BE NUMERICAL.
Are used to represent discrete data.
Usually the horizontal axis is the type of item(s) being represented
(male/female, year, month, type of TV show) and the vertical axis tells us
how much/how many people/items.
Bar charts are VERY CLEAR. It is easy to see if one bar is bigger than
another, and by how much.
THEY CAN SOMETIMES BE UPDATED. For example, if the horizontal axis
is “year” (2009, 2010, 2011, and so on) then the next year’s information
can be added on by drawing another bar for that year.
Bad Points
Bar charts are only really useful if the data you are showing can be
grouped into a handful of different groups. You don’t want to have a
chart with hundreds or thousands of bars! As a general rule, bar charts
with more than 10 bars are rare.
Functional Maths and Numeracy study guide Representing data – line graphs
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 95 of 110
LINE GRAPHS
A line graph has both horizontal and vertical axes, like a bar chart. Instead of
drawing bars, you draw points. The points are then connected WITH STRAIGHT
LINES.
Example 1
Example 2
Functional Maths and Numeracy study guide Representing data – line graphs
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 96 of 110
Line graphs do share a lot in common with bar charts:
Has a HORIZONTAL AXIS AND VERTICAL AXIS.
THEY CAN SOMETIMES BE UPDATED. For example, if the horizontal axis
is “year” (2009, 2010, 2011, and so on) then the next year’s information
can be added on by drawing another point for that year.
There are some differences, though.
A line graph is used to plot continuous data.
A line graph is intended to show PATTERNS or TRENDS, hence why the
points are LINKED TOGETHER with straight lines.
Data is only recorded where actual points are plotted. For example, in
Example 2, there was no actual data recorded for 1965, although there is
a line that goes through this date.
Line graphs can have MORE THAN ONE LINE. In those cases, a KEY is
needed so you can work out which line is for what.
Bad Points
Line Graphs are only really useful for a handful of different points. With
lots and lots of different data values a line graph would look like a
scribbly mess and the values would become hard to read.
Functional Maths and Numeracy study guide Representing data – scatter graphs
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 97 of 110
SCATTER GRAPHS
A scatter graph is a collection of different points SCATTERED across a grid. A
scatter graph will have a horizontal and vertical axis.
Example 1
Example 2
Functional Maths and Numeracy study guide Representing data – scatter graphs
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 98 of 110
Scatter Graph Facts
Great for showing lots and lots of data values – ideal for when you have
too many things to show on a bar chart or line graph for example!
Both the horizontal axis and the vertical axis are numerical.
Because of this, Scatter Graphs are great for showing large amounts data
where both groups are numerical. Examples could be:
‐ Length of newborn babies VS Weight of newborn babies;
‐ Number of police in an area VS Number of crimes in that area;
‐ Wealth of countries in dollars VS Population of countries
The points can be plotted ANYWHERE, hence “Scatter Graph”. They
don’t need to be drawn in any order. On a line graph you may have a
value for 1, value for 2, value for 3, value for 4, and so on, in a nice
order. On a scatter graph, however, the points and numbers can be
anything: 2.3, 19.4, 2.0, 6.9…
Scatter graphs are great for showing a GENERAL RELATIONSHIP between
two different things. In Example 1 you can see a clear relationship
between the ages of husband and wife, but in Example 2 the
relationship between the age of adults and their weights seems random
(as you might expect).
EVERY SINGLE PIECE OF DATA is displayed.
Bad Points
Individual points are not labelled, so you can’t tell which point is for
what person, or for what country, etc.
Functional Maths and Numeracy study guide Representing data – pie charts
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 99 of 110
PIE CHARTS
A pie chart is a circular representation of data. It gets its name from the food –
it looks like a pie cut up into different‐sized slices:
Example 1
Example 2
Functional Maths and Numeracy study guide Representing data – pie charts
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 100 of 110
Pie Chart Facts
The main purpose of pie charts is to CLEARY SHOW THE PROPORTION (ie
fraction or percentage) OF THE TOTAL each group has.
‐ In example 1, about 50% (about half) of viewers are of age 21‐39
‐ In example 2, just under a quarter is Lime.
The actual pie chart “picture” on its own is no good – you need either
labelling to go with it (like Example 1) or a KEY (like Example 2).
Pie charts are highly visual, and are therefore good for displays and
presentations.
Bad Points
On their own merits, Pie Charts are USELESS for telling us the ACTUAL
NUMBERS of things – they only show the PROPORTION of things. If you
want the actual numbers and actual totals, pie charts are not
appropriate.
Look at the examples – one had 4 slices, the other had 3 slices. Pie
Charts are only useful when there is a HANDFUL OF THINGS TO
REPRESENT. Any more than that and the Pie Chart loses its visual edge –
all slices start to look thin and it can be hard to see which slices are
bigger and which are smaller.
They cannot be updated once drawn.
In general, if you are wanting to show the PROPORTION, the PERCENTAGE, or the FRACTION of values from different groups PIE CHART
Functional Maths and Numeracy study guide Representing data – pictograms
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 101 of 110
PICTOGRAMS
A Pictogram displays information through the use of symbols, or PICTURES, as
the name suggests.
Example 1
Example 2
Functional Maths and Numeracy study guide Representing data – pictograms
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 102 of 110
Pictogram Facts
Every Pictogram needs a KEY to tell us what each picture represents. If a
pictogram is without a key, it is INCOMPLETE.
Pictograms are probably THE CLEAREST WAY OF DISPLAYING DATA and
as such are a popular choice for notice boards and public displays.
Pictograms are EASILY UPDATED. In Example 2, the pictogram could
easily be updated by drawing in an extra house every time the next 100
homes are sold.
They are convenient for younger people, or people who might not be
comfortable with bar charts and other types of displays
Bad Points
Pictograms don’t DIRECTLY tell us the total numbers of things. This
needs to be worked out from how many pictures it has, and how much
each picture represents.
Functional Maths and Numeracy study guide Representing data – tally charts
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 103 of 110
TALLY CHARTS
A tally chart can be thought of as the most basic pictogram:
Example
This tells us that Hannah owns 8 shirts, Alice 7, Ian 10, and Ray 3.
A Tally Chart is the only kind of pictogram without a key. You are just
expected to know already that each line represents 1 item, and each
“gate” represents 5 items.
If it DID have a key, it might look like this:
Aside from this, they are the same as any other pictogram. Often, a tally
chart is typically the first kind of pictogram – or any mathematical graph
– that people use.
Functional Maths and Numeracy study guide Representing data – frequency tables
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 104 of 110
FREQUENCY TABLES
“Frequency” means “How Many”. A frequency table is a very simple and clear
way of presenting data:
Example
Car registration plates sold at a second‐hand dealership.
This tells us 20 “R” plates were sold, 36 “S” plates, 41 “T” plates and 23 “V”
plates.
A GROUPED FREQUENCY TABLE is the same idea as a normal frequency table,
but puts the data into groups.
Example
GROUPED FREQUENCY TABLES are good for arranging lots of data into
more manageable groups.
A benefit of this is if you want to find the MODE OF A GROUP (THE
MODAL GROUP) instead of the MODAL VALUE. The MODAL GROUP in
the example above is age 16‐20 because there are more in that group
than any other group.
This is often useful for businesses and corporations. For example, it
might help Disney’s marketing department to know that the MODAL
AGE GROUP who watch Mickey Mouse is 5 – 10 year olds. Companies
tend to market products at age groups.
Functional Maths and Numeracy study guide Order of calculations - introduction
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 105 of 110
ORDER OF CALCULATIONS
Sometimes, it is not easy to know what to do first.
Example
What is 2 + 2 x 2?
Do you work out what 2 + 2 is, and then multiply that by 2?
[2 + 2 = 4, then 4 x 2 = 8]
OR…
Do you start with 2, and then add on what 2 x 2 is?
[2 + 4 = 6]
Who knows?
Example
What is 3 + 6 x 2 ÷ 4 + 32 – 4?
…NIGHTMARE!
You need a rule so you know what to do first, what to do second, what to do
third, and so on.
Functional Maths and Numeracy study guide Order of calculations - BODMAS
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 106 of 110
The rule is called BODMAS:
BODMAS tells you what to do. As you read down the list:
1) FIRST, work out the value of what is inside BRACKETS.
2) SECOND, look for OTHER stuff that is NOT brackets, division signs,
multiply signs, subtraction signs, addition signs.
This is usually POWERS – things like 42, 23.
The LITTLE NUMBER tells us HOW MANY TIMES to multiply the BIG NUMBER by itself: 42 = 4 x 4 25 = 2 x 2 x 2 x 2 x 2 103 = 10 x 10 x 10 And so on.
3) THIRD, do the DIVISION and MULTIPLICATION (any order)
4) LAST, do the ADDITION and SUBTRACTION.
Functional Maths and Numeracy study guide Order of calculations - BODMAS
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 107 of 110
Example 1
What is 2 + 2 x 2?
All you have here is Addition and Multiplication.
“M” comes before “A” in BODMAS, so you do the multiplication first:
2 x 2 = 4
Then, do the addition:
2 + 4 = 6.
So, 2 + 2 x 2 = 6
Example 2
What is 4 + 62 2 ?
All you have is a POWER (the little floating 2), an ADDITION and a DIVISION.
The 2 isn’t a +, ‐, x, ÷ or () …it’s something OTHER.
So you have an OTHER, a DIVISION and an ADDITION.
“O” comes before “D” and “A” in BODMAS, so you do the 62 first:
62 = 6 x 6 = 36.
Then “D” comes next, so do the DIVISION:
36 ÷ 2 = 18.
Finally, you do the addition:
4 + 18 = 22.
So, 4 + 62 2 = 22
Functional Maths and Numeracy study guide Algebra and formulae - introduction
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 108 of 110
ALGEBRA AND FORMULAE
ALGEBRA IS THE USE OF LETTERS AND SYMBOLS TO REPRESENT NUMBERS.
Formulas – called formulae – often use algebra.
Examples of formulae
Circumference of circle = 2πr
Volume of cuboid = lwh
Perimeter of rectangle = 2(l + w)
With formulae, if there is no “instruction” between one symbol and the next,you ALWAYS assume to MULTIPLY.
Example
ABC = A x B x C
5(E + F) = 5 x (E + F)
With formulae you will be given the values of the letters.
You then solve the problem by TAKING THE LETTERS OUT, and PUTTING IN THE
ACTUAL VALUES OF THOSE LETTERS.
This is called SUBSTITUTION.
Functional Maths and Numeracy study guide Algebra and formulae – substitution
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 109 of 110
Q1:
The area of a circle is given by the formula
A = πr2
Where
A = area of the circle
= 3
r = radius of circle
Work out the area of a circle with a radius of 5cm.
You are working out A (the area). You know = 3 and r = 5.
There is no instruction between and r2. So r2 = x r2
You can now SUBSTITUTE the values for the letters.
A = π x r2
= 3 x 52
= 3 x 25
= 75cm2
So the area of a circle with radius 5cm is 75cm2
Functional Maths and Numeracy study guide Algebra and formulae – substitution
August 2011. Kindly contributed by Shaun Bailey, Kirklees College. Search for Shaun on www.skillsworkshop.org E3-L2 Functional Maths and adult numeracy. For related resources visit the download page for this resource at skillsworkshop
Page 110 of 110
Q2:
A company uses a formula to calculate the amount (area) of wrapping paper,
A, for its product:
A = (L + H + 2)(2W + 2H + 2) Where: L = 11 cm W = 6 cm H = 4cm
What is the area of the wrapping paper?
There are two brackets, but no “instruction” between them.
There is also no “instruction” between the 2 and W, or between the 2 and H.
Where there is no instruction, it means you MULTIPLY.
A = (L + H + 2)(2W + 2H + 2)
A = (L + H + 2) x (2 x W + 2 x H + 2)
You can now substitute in the values for L, W, and H:
A = (11 + 4 + 2) x (2 x 6 + 2 x 4 + 2)
= (17) x (12 + 8 + 2) doing x before + because of BODMAS
= (17) x (22)
= 368cm2