fitness playground
TRANSCRIPT
FITNESS PLAYGROUND ITEM NO: 8010
OWNER’S MANUAL
The specifications of this product may vary from this photo and are subject to change without notice.
IRONMAN, IRONMAN TRIATHLON and M-DOT are registered trademarks of World Triathlon
Corporation. This product is licensed by the IRONMAN TRIATHLON.
CAUTION: This unit is designed to be used safely by up to 4 children between the ages of 3
years to 8 years old with a maximum weight of 100 pounds (45.4 kgs) each, simultaneously,
not to exceed a combined weight of 400 pounds (181.6 kgs).
1
IMPORTANT: FOR NORTH AMERICA ONLY
To request product service and order
replacement parts, please call our customer
service department at:
1-866-924-1688 Monday through Friday, 8:00 AM-5:00 PM Pacific Standard Time,
or email us at: [email protected]
Please visit our website at www.paradigmhw.com.
Please have the following information ready when requesting for service:
Your name
Phone number
Model number
Serial number
Part number
Proof of Purchase
*Before returning this product to the store please contact customer
service at the contact number.
Paradigm Health & Wellness, Inc.
1189 Jellick Ave.
City of Industry, CA 91748, USA
2
TABLE OF CONTENTS
Warranty -------------------------------------------------------------------------------------------- 3
Important Safety Precautions ------------------------------------------------------------------ 4
Tools Required for Assembly ------------------------------------------------------------------ 5
Hardware for Assembly ------------------------------------------------------------------------- 6
Parts Numbers and Illustrations --------------------------------------------------------------- 8
Overview Drawing -------------------------------------------------------------------------------- 15
Assembly Instructions --------------------------------------------------------------------------- 16
Ground Anchor Installation --------------------------------------------------------------------- 24
Parts Request Fax Form ------------------------------------------------------------------------ 26
3
MANUFACTURER’S LIMITED WARRANTY (IRONKIDS FITNESS PLAYGOUND)
Paradigm Health & Wellness warrants to the original purchaser that this product is free from defects in material and
workmanship when used for the purpose intended, under the conditions that it has be installed and operated in
accordance with Paradigm’s Owner’s Manual. Paradigm’s obligation under this warranty applies to the following:
COMPONENT LENGTH OF WARRANTY
Structural Frame Lifetime (1)
All Other Components 180 days (2)
This warranty does not include damage caused by normal wear and tear, weather corrosion, misuse, commercial
use or improper operation. Paradigm will replace free of charge any parts which may prove to be defective under
normal home use. This warranty is offered only to the original purchaser and is not transferable. Proof of original
purchase is required.
Ordering Replacement Parts
Replacement parts can be ordered by calling or emailing our customer service department
1-866-924-1688 Monday through Friday, 8:00 AM - 5:00 PM (PST).
When ordering replacement parts please have the following information ready:
1. Owner’s Manual
2. Model Number
3. Description of Parts
4. Part Number
5. Date of Purchase
4
IMPORTANT SAFETY PRECAUTIONS Read all instructions carefully before assembling operating this product. Retain this owner’s manual and keep the original purchase receipt for future reference. 1. Before you assemble the Fitness Playground, find level ground not less than 6 feet from any
structure or obstruction to the Fitness Playground. Your Fitness Playground must have clearance on all sides.
2. To prevent serious injury, do not allow children to play on the Fitness Playground until it is completely installed.
3. Do not install the Fitness Playground over concrete, packed dirt, or any other hard surface. A fall onto a hard surface can result in serious injury or death to the user.
4. Only adults should assemble or disassemble this Fitness Playground. 5. This product must be anchored. 6. Adult supervision of children is required at all times when on or around this Fitness Playground.
Never leave children unattended. 7. Do not swing too high or at an angle. 8. Do not hang on or climb from structural members of the Fitness Playground. 9. Do not exceed the intended weight limit or maximum number of users for the Fitness
Playground. 10. This product is intended to be used by children between the ages of 3-8 years old. 11. Be sure to observe your children and insure that they have the strength and skills to enjoy all the
rides safely before use on their own. 12. Do not allow children to walk close to, behind, or in front of moving items. 13. Do not allow children to twist the chains on the swing or loop them over the top bar. This may
reduce the strength of the chain. 14. Teach and instruct children not to swing empty seats. 15. Instruct children how to sit in the center of the seats and swing with their full weight on the seat. 16. Warn children not to use the equipment in any manner other than intended. 17. Warn children not to get off the rides while in motion.
18. Warn children to dress appropriately. Loose fitting clothing is potentially hazardous when using the Fitness Playground.
19. Equipment may be slippery when wet. Do not allow children to use the equipment when wet. 20. Parents should regularly check openings and surfaces, such as slides, for items that may be
hazardous. 21. Parents should check swing chains to insure they are secure and can not be looped back on
themselves.
22. Do not place any part of the body near moving parts. 23. Never slide head first down the slide. 24. Ensure that all swings and chains are secured at both ends. 25. Never attach any materials that are not specifically designed for use with this swing set, such as
jump ropes, pet leashes, rope or cords and other chains as these pose a potential strangulation hazard.
26. Children must be supervised at all times. No playground is safe without adult supervision. Play Ground Rules 1. Do not use equipment when wet. 2. No running, pushing, shoving, or roughhousing. 3. Do not use play equipment before reading manual. 4. Always wear proper footwear.
5
CARE AND MAINTENANCE Check all nuts and bolts by monthly during the usage season for tightness and tighten as required.
It is particularly important that all nuts and bolts are checked prior to the first use each season.
TOOLS REQUIRED FOR ASSEMBLY
Please prepare the following tools prior to assemble this equipment.
Tape Measure
Phillips Screwdriver
Allen Wrench with Phillips Screwdriver M5
(Included)
Allen Wrench M5
(Included)
Wrench 13x10mm
(Included)
Hammer
6
HARDWARE FOR ASSEMBLY Hardware used for main frame assembly
Binder Post & Bolt Set (Preassembled) M8x15 Bolt
Ø10x52 Sleeve Nut 6 SETS
(Aa1)
Binder Post & Bolt Set (Preassembled) M6x12 Bolt
Ø8x45 Sleeve Nut
6 SETS
(Aa2)
(Aa3)
Binder Post & Bolt Set M6x12 Bolt
Ø8x40 Sleeve Nut 8 SETS (Preassembled on the Top Bar and Legs Support)
28 SETS (Packed in the PE Bag)
(Aa4)
M6x47 Bolt Set (Preassembled) 4 SETS
(Aa5)
M6x55 Bolt Set (Preassembled) 4 SETS
7
Hardware used for glider assembly
(Ba1)
Binder Post & Bolt Set (Preassembled) M6x12 Bolt
Ø8x73 Sleeve Nut
2 SETS
(Ba2)
M6x40 Bolt Set (Preassembled)
2 SETS
M6x38 Bolt Set (Preassembled)
4 SETS
(Ba3)
8
PARTS NUMBERS AND ILLUSTRATIONS Parts used for main frame assembly
A1
Top Bar 1 PC
A2 Top Bar 1 PC
A3
Climber Leg 2 PCS
A4
Climber Leg 2 PCS
A5 Leg
(Two legs are labeled A and B.) 2 PCS
A6 Cross Bar 2 PCS
A7 Cross Bar 1 PC
A8 Climbing Bar 12 PCS
A9 Ground Anchor 6 PCS
9
A10
Top Bar and Climber Legs Support 2 PCS
A11 Top Bar and Legs Support
(Two sides are labeled A and B.) 1 PC
A12
Plastic Stick Holder 2 PCS
A13
Plastic Stick Holder 2 PCS
A14 Protective Net 1 PC
10
Hardware used for main frame assembly
Aa1
Binder Post & Bolt Set (Preassembled)
M8x15 Bolt
Ø10x52 Sleeve Nut
6 SETS
Aa2
Binder Post & Bolt Set (Preassembled)
M6x12 Bolt Ø8x45 Sleeve Nut
6 SETS
Aa3
Binder Post & Bolt Set M6x12 Bolt
Ø8x40 Sleeve Nut
8 SETS (Preassembled on
the Top Bar and Legs
28 SETS (Packed in the PE
Bag)
Support)
36 SETS
Aa4 M6x47 Bolt Set (Preassembled)
4 SETS
Aa5 M6x55 Bolt Set (Preassembled)
4 SETS
Aa6 Cap for Top Bar A1 & A2
(Preassembled) 2 PCS
Aa7 Cap for Legs (Preassembled) 4 PCS
Aa8 Cap for Legs (Preassembled) 2 PCS
11
Parts used for glider assembly
Hardware used for glider assembly
B1
Glider Vertical Pole 2 PCS
B2 Glider Horizontal Pole 2 PCS
B3 Foot Rest 2 PCS
B4 Glider Seat 2 PCS
B5 Glider Attachment 1 PC
B6 Glider Vertical Pole Cap 2 SETS
Ba1
Binder Post & Bolt Set (Preassembled)
M6x12 Bolt
Ø8x73 Sleeve Nut
2 SETS
Ba2 M6x40 Bolt Set (Preassembled)
2 SETS
Ba3 M6x38 Bolt Set (Preassembled)
4 SETS
12
Parts used for trapeze assembly
Hardware used for trapeze assembly
Ba4
Binder Post & Bolt Set (Preassembled)
M6x12 Bolt Ø8x40 Sleeve Nut
2 SETS
Ba5
Bolt Set
M8 Bolt
Ø10x30 Sleeve Nut
1 SET
T1
Trapeze Tube 1 PC
Ta1
Ø10x30 Sleeve Nut Set
(Preassembled) 2 SETS
Ta2 Eye Bolt Set
(Preassembled) 2 SETS
13
Parts used for swing seats assembly
Hardware used for swing seats assembly
J1
Swing Ring 2 PCS
J2 Swing Seat 1 PC
Ja1
Ø10x30 Sleeve Nut Set
(Preassembled) 2 SETS
Ja2 Eye Bolt Set
(Preassembled) 2 SETS
Ja3 Screw Hook (Preassembled) 2 PCS
Ja4 Screw Hook Cap Set 2 SETS
14
Parts used for shade assembly
H1
Sunshade 1 PC
H2 Plastic Stick 2 PCS
15
OVERVIEW DRAWING
16
ASSEMBLY INSTRUCTIONS Place the playground equipment on level ground, not less than 6 feet (1.8 meters) from any
structure or obstruction such as a fence, garage, house, overhanging branches, laundry lines, or
electrical wires.
Do not install the playground equipment over concrete, asphalt, packed earth, or any other hard
surface. A fall onto a hard surface can result in serious injury to the user.
TIGHTENING NUTS & BOLTS
Do not over-tighten the nuts and bolts when you are assembling your playground equipment.
This will allow for some possible adjustments and ease of installation.
Once you have completed the assembly of the playground equipment, go back over all of the nuts
and bolts and properly tighten all of them before using the playground equipment.
Main Frame Layout
17
Step 1 Remove two sets of Aa1 from A1 and A2.
Insert the small end of A1 into the socket of A2 and align the holes. Attach A10 onto A1 and A2 with two sets of Aa1 that were removed. ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ Step 2
Climber Legs (A3) Assembly Remove four sets of Aa3 from both A10. Insert both small ends of A3 into the sockets of the
A10. Align the holes and secure using four sets of Aa3 that were removed. Attach A6 onto both A3 with two sets of Aa3. Legs (A5) Assembly Remove four sets of Aa2 from both A5. Insert the small end of A5 (labeled A) into the socket of
the A11 (labeled A). Repeat the above procedure to install the other A5 (labeled B) into A11 (labeled B).
Align the holes and secure using four sets of Aa2 that were removed. Remove two sets of Aa2 from both A5. Attach A7 onto both A5 with two sets of Aa2 that were
removed. Climber Legs (A4) Assembly Remove four sets of Aa3 from both A10. Insert both small ends of A4 into the sockets of the
A10. Align the holes and secure using four sets of Aa3 that were removed. Attach A6 onto both A4 with two sets of Aa3 that were removed.
The Glider Attachment (B5) is preassembled.
18
Step 3
Remove four sets of Aa5 from both A5.
Attach A12 and A13 onto both A5 with four sets of Aa5 that were removed.
Remove four sets of Aa4 from both A4.
Attach A12 and A13 onto both A4 with four sets of Aa4 that were removed.
Attach twelve A8 onto both A3 and A4 with twenty four sets of Aa3.
19
Step 4
Insert H2 into the holes on H1.
Insert one end of the H2 onto the tube of A13 on A5 and the other end of the H2 onto the tube of
A12 on A4.
Insert the other H2 onto the tube of A12 on A5 and the other end of the H2 onto the tube of A13 on
A4.
Attach A14 onto the A6 and both A4 with Velcro straps.
A6
20
Step 5
Remove one set of Ba2 from B1.
Insert the B1into the hole on B3.
Align the hole and secure using one set of Ba2 that was removed.
Repeat the above same procedure to install the other B1 into B3.
․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․
Step 6
Remove two sets Ba4 from B5.
Install one set of B6 onto the top end of B1.
Install B6 with B1 onto B5 and align the holes and secure using one set of Ba4 that was removed.
Repeat the above same procedure to install the other set of B6 with B1 onto B5.
21
Step 7
Remove two sets of Ba1 from both B1.
Attach both B2 onto both B1 with two sets of Ba1 that were removed.
22
Step 8
Remove four sets of Ba3 from both B2.
Attach both B4 onto both B2 with four sets of Ba3 that were removed.
․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ Step 9
Hang J1 in place from Ja2 on the A2.
23
Step 10
Hang T1 in place from Ta2 on the A2.
24
GROUND ANCHOR INSTALLATION
You may either anchor the feet in hard soil or if your soil is soft (sand, etc.), you may use the
corkscrew (A9) anchor to secure the playground. If you wish to permanently secure your swing set,
setting the legs in concrete secured by a brick or gravel bed is recommended. Ensure equipment is
firmly anchored. When cementing equipment, bury the legs about three inches below the ground.
This will ensure sufficient space remains under the swings. Be certain that all anchoring devices
(including concrete) are placed below the level of the playing surface or below ground level to prevent
tripping. Be sure the swing set is located on level ground.
For Soil Ground Installation:
Turn the corkscrew anchor into the ground until only the hooked end is above the ground next to the
leg.
Insert the hooked end into the bottom opening of the leg.
Ensure that the hooked end is secure in the leg opening.
Correct Incorrect When turning the corkscrew anchor into the ground, please make sure the anchor is roughly
perpendicular to the playground feet.
A9 A9
A9
25
For Concrete Ground Installation:
If the swing set is set up on grounds with sandy soil, it must be anchored with concrete footing
(concrete not included).
Dig holes around swing leg tube as shown below in drawing. As you dig down and create a
cylindrical hole, you should use a shovel to carve out the lower part of the hole, to create a larger
diameter hole at the bottom.
Place 2 inch high brick or 2 inches of gravel bed as shown in drawing below.
Use about 45lb of concrete per leg.
Cover concrete with dirt and protective surface material.
Allow about 6-7 days for concrete to dry properly.
Note: The maximum fall height for this product is 6 feet. The minimum ground clearance between the bottom of the suspended plays and the playing or ground service must be 8 inches.
Warning: Please bury the legs of the swing set as per instruction. If the swing set is used without proper anchoring, it may be dangerous and may tilt over.
This play ground received ASTM F2276 and CPSIA certification.
Brick or gravel bed
1.9
7 i
nch
es
12.6 inches
Concrete Frame Leg
5 i
nch
es
8”
Must keep a minimum 8 inches of space with the soil.
26
IRONKIDS
PARTS REQUEST FAX FORM
Please fax this form to (1-626-810-2166)
OR YOU CAN EMAIL CUSTOMER SERVICE REQUESTS TO
[email protected] NAME: _____________________________________________________________________
ADDRESS: _________________________________________________________________
CITY ________________ STATE __________________ ZIP ________________
TELEPHONE: (Day) __________________________________________________________
(Night) _________________________________________________________
(Email Address) _________________________________________________
SERIAL#: ______________________________________________________
MODEL#: ______________________________________________________
PURCHASE DATE: ___________________________________________________________
PURCHASE FROM: ___________________________________________________________
“YOUR ORDER WILL BE PROCESSED WITHIN 3 BUSINESS DAYS”
PART # DESCRIPTION QTY
OFFICIAL USE ONLY
SHIP DATE: ___________________________________________
TRK #: _______________________________________________
BACK ORDER: ________________________________________