falcon consulting professionals
TRANSCRIPT
Page 1 of 28
Falcon Consulting Professionals
Training Calendar 2020
DUBAI ABU DHABI GREECE LONDON GCC COUNTRIES
Page 2 of 28
Second Quarter 2020 June July August September
Starting Day Sunday 31/5 7 14 21 28 5 12 19 26 2 9 16 23 30/8 6 13 20 27
Ending day Thursday 4 11 18 25 2/7 9 16 23 30 6 13 20 27 3 10 17 24 1/10
Course Ref. Course Title Course Duration
Teaching hrs.
Fee (USD $)
Logistics
F-LG01 Early Warning Management 5 days 20 hrs. 550
F-LG02 Discard the Noise of Information 5 days 20 hrs. 550
F-LG03 Operational Planning & Industrial Costing 5 days 20 hrs. 550
F-LG04 Identification of bottlenecks & resolutions 5 days 20 hrs. 550
F-LG05 Design of an Evaluation Assessment System 5 days 20 hrs. 550
F-LG06 Meta-ERP era. Go beyond conventional ERP systems
5 days 20 hrs. 550
F-LG07 On-time Delivery Performance Improvement 5 days 20 hrs. 550
F-LG09 Flexible Budgeting 5 days 20 hrs. 550
F-LG10 Red Queen's Tale-A methodology to Change Management
5 days 20 hrs. 550
F-LG11 Effective Purchasing and Contract Negotiation Strategies
5 days 20 hrs. 550
F-LG12 Inventory Management 5 days 20 hrs. 550
F-LG13 Best Procurement Practices 5 days 20 hrs. 550
Page 3 of 28
June July August September
Starting Day Sunday 31/5 7 14 21 28 5 12 19 26 2 9 16 23 30/8 6 13 20 27
Ending day Thursday 4 11 18 25 2/7 9 16 23 30 6 13 20 27 3 10 17 24 1/10
Course Ref.
Course Title Course Duration
Teaching hrs.
Fee (USD $)
Mechanical Engineering
F-ME01 Basic Operation and Theory of Steam and Gas
Turbines, Co-Generation and Combined Cycle Plants 5 days 20 hrs. 550
F-ME02 Bearing Lubrication, Installation, Inspection, Maintenance, Troubleshooting & Failure Analysis
5 days 20 hrs. 550
F-ME03 Certified Boiler Operation, Instrumentation & Control
5 days 20 hrs. 550
F-ME04 Compressor Operation, Practice, and Maintenance 5 days 20 hrs. 550
F-ME05 Design And Fabrication Shell-and-Tube Heat Exchangers In Accordance To ASME & TEMA Codes
5 days 20 hrs. 550
F-ME06 Heat Exchanger Design, Operation, Performance, Inspection, Maintenance & Repair
5 days 20 hrs. 550
F-ME07 Heat Exchangers Maintenance and Troubleshooting 5 days 20 hrs. 550
F-ME08 Mechanical Integrity & Reliability in Refineries, Petrochemical & Process Plant
5 days 20 hrs. 550
F-ME09 Practical Pump Technology: Selection, Operation & Maintenance
5 days 20 hrs. 550
F-ME10 Practical Pumps Technology: Selection, Application, Operation, Troubleshooting & Maintenance
5 days 20 hrs. 550
F-ME11 Principles of Rotating Equipment 5 days 20 hrs. 550
F-ME12 Reciprocating Compressors: Operation and Maintenance
5 days 20 hrs. 550
F-ME13 Rotating Equipment Reliability Optimization 5 days 20 hrs. 550
F-ME14 Rotating Equipment: Selection, Operation, Troubleshooting & Effective Predictive Maintenance
5 days 20 hrs. 550
F-ME15 Welding and welding technology 5 days 20 hrs. 550
Page 4 of 28
June July August September
Starting Day Sunday 31/5 7 14 21 28 5 12 19 26 2 9 16 23 30/8 6 13 20 27
Ending day Thursday 4 11 18 25 2/7 9 16 23 30 6 13 20 27 3 10 17 24 1/10
Course Ref.
Course Title Course Duration
Teaching hrs.
Fee (USD $)
Environmental
F-ENV01 CEMS Operations and Maintenance 5 days 20 hrs. 550
F-ENV02 Air dispersion modelling 5 days 20 hrs. 550
F-ENV03 Air pollution- Refinery Emission estimation 5 days 20 hrs. 550
F-ENV04 Best Available Techniques for Energy Efficiency 5 days 20 hrs. 550
F-ENV05 Best Available Techniques for Large Combustion Plans
5 days 20 hrs. 550
F-ENV06 Best Available Techniques for Refining 5 days 20 hrs. 550
F-ENV07 Design and operation of WWTP 5 days 20 hrs. 550
F-ENV08 Environmental Impact Assessment (EIA) 5 days 20 hrs. 550
F-ENV09 Ground water monitoring 5 days 20 hrs. 550
F-ENV10 Ground water remediation techniques 5 days 20 hrs. 550
F-ENV11 Hazardous Waste Management 5 days 20 hrs. 550
F-ENV12 Industrial Waste management 5 days 20 hrs. 550
F-ENV13 Odour Control 5 days 20 hrs. 550
F-ENV14 Oil spill contingency planning 5 days 20 hrs. 550
F-ENV15 Oil Spill Management & Response (IMO Certification)
5 days 20 hrs. 550
F-ENV16 Oily WWTP design, operation and monitoring 5 days 20 hrs. 550
F-ENV17 Physical and technological disasters 5 days 20 hrs. 550
F-ENV18 Soil remediation 5 days 20 hrs. 550
F-ENV19 Storm water management 5 days 20 hrs. 550
F-ENV20 Sustainability and Green Building 5 days 20 hrs. 550
F-ENV21 Waste Water Treatment & Technology 5 days 20 hrs. 550
F-ENV22 Wastewater Treatment, Management and Recycling
5 days 20 hrs. 550
Page 5 of 28
June July August September
Starting Day Sunday 31/5 7 14 21 28 5 12 19 26 2 9 16 23 30/8 6 13 20 27
Ending day Thursday 4 11 18 25 2/7 9 16 23 30 6 13 20 27 3 10 17 24 1/10
Course Ref. Course Title Course Duration
Teaching hrs.
Fee (USD $)
Water and Wastewater
F-WM01 Design and operation of WWTP 5 days 20 hrs. 550
F-WM02 Odour Control 5 days 20 hrs. 550
F-WM03 Oily Water Treatment Technology 5 days 20 hrs. 550
F-WM04 Oily WWTP design, operation and monitoring 5 days 20 hrs. 550
F-WM05 Storm water management 5 days 20 hrs. 550
F-WM06 Waste Water Treatment & Technology 5 days 20 hrs. 550
F-WM07 Wastewater Treatment, Management and Recycling 5 days 20 hrs. 550
F-WM08 Water Audit & Leak Detection 5 days 20 hrs. 550
F-WM09 Water Desalination Technologies 5 days 20 hrs. 550
F-WM10 Water Distribution Systems & Pumping Stations 5 days 20 hrs. 550
F-WM11 Water treatment processes 5 days 20 hrs. 550
Visit our website https://falcon-professionals.com for the latest updates and new courses
Page 6 of 28
June July August September
Starting Day Sunday 31/5 7 14 21 28 5 12 19 26 2 9 16 23 30/8 6 13 20 27
Ending day Thursday 4 11 18 25 2/7 9 16 23 30 6 13 20 27 3 10 17 24 1/10
Course Ref.
Course Title Course Duration
Teaching hrs.
Fee (USD $)
Health, Safety and Environmental
F-HSE01 Industrial Hygiene 5 days 20 hrs. 550
F-HSE02 Air dispersion modelling 5 days 20 hrs. 550
F-HSE03 Air pollution- Refinery Emission estimation 5 days 20 hrs. 550
F-HSE04 CEMS Operations and Maintenance 5 days 20 hrs. 550
F-HSE05 Certified HAZOP Leader 5 days 20 hrs. 550
F-HSE06 Certified Occupational Health, Safety & Industrial Hygiene
5 days 20 hrs. 550
F-HSE07 Chemical, Biological, Radiological and Nuclear Material Handling (HAZMAT/HAZCOM)
5 days 20 hrs. 550
F-HSE08 Design and operation of WWTP 5 days 20 hrs. 550
F-HSE09 Environmental Impact & Life Cycle Assessments (ISO 14001/14040/14041)
5 days 20 hrs. 550
F-HSE10 Environmental Impact Studies 5 days 20 hrs. 550
F-HSE11 Ground water monitoring 5 days 20 hrs. 550
F-HSE12 Ground water remediation techniques 5 days 20 hrs. 550
F-HSE13 Hazardous Waste Management & Pollution Prevention
5 days 20 hrs. 550
F-HSE14 Odour Control 5 days 20 hrs. 550
F-HSE15 Offshore Safety, Risk & Reliability 5 days 20 hrs. 550
F-HSE16 Oil spill contingency planning 5 days 20 hrs. 550
F-HSE17 Oil Spill Management & Response (IMO Certification)
5 days 20 hrs. 550
F-HSE18 Oily WWTP design, operation and monitoring 5 days 20 hrs. 550
F-HSE19 Physical and technological disasters 5 days 20 hrs. 550
F-HSE20 Quantitative Risk Assessment (QRA) in Process Plants
5 days 20 hrs. 550
Page 7 of 28
June July August September
Starting Day Sunday 31/5 7 14 21 28 5 12 19 26 2 9 16 23 30/8 6 13 20 27
Ending day Thursday 4 11 18 25 2/7 9 16 23 30 6 13 20 27 3 10 17 24 1/10
Course Ref. Course Title Course Duration
Teaching hrs.
Fee (USD $)
Health, Safety and Environmental
F-HSE21 Radiation Protection Officer (RPO) 5 days 20 hrs. 550
F-HSE22 Soil remediation 5 days 20 hrs. 550
F-HSE23 Storm water management 5 days 20 hrs. 550
F-HSE24 Sustainability and Green Building 5 days 20 hrs. 550
F-HSE25 Waste Water Treatment & Technology 5 days 20 hrs. 550
F-HSE26 Wastewater Treatment, Management and Recycling
5 days 20 hrs. 550
F-HSE27 Fires, Explosion and Toxic Gas Dispersions: Effects & Consequences Calculations
5 days 20 hrs. 550
F-HSE028 Emergency Response Planning 5 days 20 hrs. 550
F-HSE029 HAZOP Training 5 days 20 hrs. 550
F-HSE030 Process Safety Management 5 days 20 hrs. 550
Falcon partners and instructors provide advanced non-formal, business–oriented learning services based on the ISO
29990/2010—”Learning services for non-formal education and training”, on the pillars of the deep experience and
knowledge of their partners and instructors.
Page 8 of 28
June July August September
Starting Day Sunday 31/5 7 14 21 28 5 12 19 26 2 9 16 23 30/8 6 13 20 27
Ending day Thursday 4 11 18 25 2/7 9 16 23 30 6 13 20 27 3 10 17 24 1/10
Course Ref. Course Title Course Duration
Teaching hrs.
Fee (USD $)
Maintenance and Facilities Management
F-MF01 Excellence in Maintenance & Reliability Management: Rotating Equipment Reliability Optimization & Continuous Improvement
5 days 20 hrs. 550
F-MF02 Precision, Preventive & Predictive Maintenance 5 days 20 hrs. 550
F-MF03 Excellence in Reliability, Availability & Maintainability (RAM)
5 days 20 hrs. 550
F-MF04 Machinery Failure Analysis, Prevention & Troubleshooting: Machinery Diagnostics and Root Cause Failure Analysis (RCFA)
5 days 20 hrs. 550
F-MF05 Machinery Failure, Vibration & Predictive Maintenance
5 days 20 hrs. 550
F-MF06 Maintenance Optimization & Best Practices 5 days 20 hrs. 550
F-MF07 Material Cataloguing, Specifications, Handling & Storage
5 days 20 hrs. 550
F-MF08 Root Cause Analysis (Apollo Method) 5 days 20 hrs. 550
Together we can design customized solutions for all your training needs and you get personal consultation directly from our instructors.
Page 9 of 28
June July August September
Starting Day Sunday 31/5 7 14 21 28 5 12 19 26 2 9 16 23 30/8 6 13 20 27
Ending day Thursday 4 11 18 25 2/7 9 16 23 30 6 13 20 27 3 10 17 24 1/10
Course Ref. Course Title Course Duration
Teaching hrs.
Fee (USD $)
Laboratory Management and Instrumentation
F-LMI01 Advanced Statistical Analysis of Laboratory Data 5 days 20 hrs. 550
F-LMI02
Advanced Statistical Analysis of Laboratory Data: Method Development, Method Validation, Uncertainty, Calibration, SQC and Data Interpretation 5 days
20 hrs. 550
F-LMI03 Analytical Chemistry refresh for laboratory technicians 5 days
20 hrs. 550
F-LMI04 Analytical Instrumentation for Laboratory 5 days 20 hrs. 550
F-LMI05 Analytical Methods, Procedures, Quality Control, Technology, Analysis & Best Practice 5 days
20 hrs. 550
F-LMI06 GC/MS-Principles, instrumentation and quantitative analysis 5 days
20 hrs. 550
F-LMI07 ISO 17025 and Good Laboratory Practices 5 days 20 hrs. 550
F-LMI08 ISO 17025 Internal Auditor 5 days 20 hrs. 550
F-LMI09 Laboratory Information Management System (LIMS) 5 days 20 hrs. 550
F-LMI10 Laboratory Instrument Calibration 5 days 20 hrs. 550
F-LMI11
Modern Chemical Laboratory: Analytical Instrumentation, Equipment Calibration, Operations, Quality & Safety 5 days
20 hrs. 550
F-LMI12 Modern Laboratory Management: Effective Management of the Chemical Analysis Support 5 days
20 hrs. 550
F-LMI13 Modern Laboratory Safety & Health 5 days 20 hrs. 550
F-LMI14 Natural and refinery gases analysis 5 days 20 hrs. 550
F-LMI15 Practical Problem Solving in Chemical Analysis 5 days 20 hrs. 550
F-LMI16 Principle and Chemistry of Instrumental Analysis 5 days 20 hrs. 550
F-LMI17 Refinery laboratory technician training 5 days 20 hrs. 550
F-LMI18 Total Quality Management and Laboratory Operation 5 days
20 hrs. 550
F-LMI19 Water and waste water analysis 5 days 20 hrs. 550
Page 10 of 28
June July August September
Starting Day Sunday 31/5 7 14 21 28 5 12 19 26 2 9 16 23 30/8 6 13 20 27
Ending day Thursday 4 11 18 25 2/7 9 16 23 30 6 13 20 27 3 10 17 24 1/10
Course Ref. Course Title Course Duration
Teaching hrs.
Fee (USD $)
Soft Skills
F-SS01 Achieving Leadership Excellence 5 days 20 hrs. 550
F-SS02 Excellence in Leadership & Teambuilding 5 days 20 hrs. 550
F-SS04 Quality Assurance & Control 5 days 20 hrs. 550
F-SS05 Strategy & Strategic Planning 5 days 20 hrs. 550
F-SS06 Leadership Skills Advanced 5 days 20 hrs. 550
F-SS07 Employee Relations Management 5 days 20 hrs. 550
F-SS08 Operational Change Management 5 days 20 hrs. 550
Quality Systems
F-QS01 Advanced Statistical Analysis of Laboratory Data 5 days
20 hrs. 550
F-QS02 Data Analysis Techniques 5 days 20 hrs. 550
F-QS03 Environmental management systems ISO14000 series 5 days 20 hrs. 550
F-QS04 Green procurement 5 days 20 hrs. 550
F-QS05 ISO 14001 Internal Auditor 5 days
20 hrs. 550
F-QS07 ISO 9001 system 5 days 20 hrs. 550
F-QS08 Total Quality Management 5 days 20 hrs. 550
F-QS09 Total Quality Management and Laboratory Operation 5 days 20 hrs. 550
F-QS10 Uncertainty of Measurement and Method Validation in Accordance to ISO 17025
5 days 20 hrs. 550
F-QS11 Workshop on Statistical Analysis of Laboratory Data and Quality Control Charts
5 days 20 hrs. 550
Page 11 of 28
June July August September
Starting Day Sunday 31/5 7 14 21 28 5 12 19 26 2 9 16 23 30/8 6 13 20 27
Ending day Thursday 4 11 18 25 2/7 9 16 23 30 6 13 20 27 3 10 17 24 1/10
Course Ref. Course Title Course Duration
Teaching hrs.
Fee (USD $)
Process Engineering
F-PE01 Energy Conservation Optimization for Fired Heaters Process
5 days 20 hrs. 550
F-PE02 Certified Process Safety Management (PSM) - Advanced
5 days 20 hrs. 550
F-PE03 Chemical Engineering for Non-Chemical Engineers 5 days 20 hrs. 550
F-PE04 Crude Oil Storage Facilities: Operations, Control & Troubleshooting
5 days 20 hrs. 550
F-PE05 Distillation-Column Operation, Control & Troubleshooting
5 days 20 hrs. 550
F-PE06 Oil Movement, Storage & Troubleshooting 5 days 20 hrs. 550
F-PE07 Oily Water Treatment Technology 5 days 20 hrs. 550
F-PE08 Operation of Process Equipment: Fired Heaters, Air Coolers, Heat Exchangers, Pumps, Compressors, Crude Desalter, Pressure Vessels & Valves
5 days 20 hrs. 550
F-PE09 Polymer technology 5 days 20 hrs. 550
F-PE10 Principles of Operations Planning 5 days 20 hrs. 550
F-PE11 Process Control, Instrumentation, Troubleshooting & Problem Solving
5 days 20 hrs. 550
F-PE12 Process Energy Efficiency Improvement for Industrial Plants
5 days 20 hrs. 550
F-PE13 Process Equipment Design, Applications, Maintenance & Troubleshooting: Rules of Thumb for Process Engineers
5 days 20 hrs. 550
Page 12 of 28
June July August September
Starting Day Sunday 31/5 7 14 21 28 5 12 19 26 2 9 16 23 30/8 6 13 20 27
Ending day Thursday 4 11 18 25 2/7 9 16 23 30 6 13 20 27 3 10 17 24 1/10
Course Ref. Course Title Course Duration
Teaching hrs.
Fee (USD $)
Process Engineering
F-PE15 Process Plant Optimization Technology & Continuous Improvement
5 days 20 hrs. 550
F-PE16 Process Plant Optimization, Revamping & Debottlenecking
5 days 20 hrs. 550
F-PE17 Process Plant Performance & Efficiency 5 days 20 hrs. 550
F-PE18 Process Plant Start-up, Commissioning & Troubleshooting
5 days 20 hrs. 550
F-PE19 Process Plant Troubleshooting & Engineering Problem Solving
5 days 20 hrs. 550
F-PE20 Reactors: Operation, Troubleshooting, Start-Up & Shutdown
5 days 20 hrs. 550
F-PE21 Quantitative Risk Assessment (QRA) in Process Plants 5 days 20 hrs. 550
F-PE22 Troubleshooting Process Operations 5 days 20 hrs. 550
F-PE23 Tank gauging 5 days 20 hrs. 550
F-PE24 Flare, Blowdown & Pressure Relief Systems 5 days 20 hrs. 550
F-PE25 Aspen HYSYS Dynamics: Introduction to Dynamic Modelling.
5 days 20 hrs. 550
F-PE26 Aspen HYSYS: Advanced Process Modelling Topics 5 days 20 hrs. 550
Page 13 of 28
June July August September
Starting Day Sunday 31/5 7 14 21 28 5 12 19 26 2 9 16 23 30/8 6 13 20 27
Ending day Thursday 4 11 18 25 2/7 9 16 23 30 6 13 20 27 3 10 17 24 1/10
Course Ref. Course Title Course Duration
Teaching hrs.
Fee (USD $)
Project Management
F-PM01 Risk Management Professional Certification 5 days 20 hrs. 550
F-PM02 Certified Project Leader: Project Planning, Scheduling, Monitoring, Reporting & Control
5 days 20 hrs. 550
F-PM03 Mastering Project Management 5 days 20 hrs. 550
F-PM04 Project Risk Analysis & Management 5 days 20 hrs. 550
F-PM05 Risk Management (ISO 31000) 5 days 20 hrs. 550
F-PM06 Warehouse Operations and Management 5 days 20 hrs. 550
F-PM07 Construction Management 5 days 20 hrs. 550
F-PM08 Shut down & Turn around Management 5 days 20 hrs. 550
F-PM09 Project Site Supervisors 5 days 20 hrs. 550
Page 14 of 28
June July August September
Starting Day Sunday 31/5 7 14 21 28 5 12 19 26 2 9 16 23 30/8 6 13 20 27
Ending day Thursday 4 11 18 25 2/7 9 16 23 30 6 13 20 27 3 10 17 24 1/10
Course Ref. Course Title Course Duration
Teaching hrs.
Fee (USD $)
Upstream
F-UP01 High Pressure High Temperature Drilling (HPHT) 5 days 20 hrs. 550
F-UP02 Subsurface Production Operations 5 days 20 hrs. 550
F-UP03 Management of reservoir condensates 5 days 20 hrs. 550
F-UP04 Well Integrity management 5 days 20 hrs. 550
F-UP05 X-mas tree and wellhead operation, maintenance and testing
5 days 20 hrs. 550
F-UP06 Drilling Fluids 5 days 20 hrs. 550
F-UP07 Well completion design and operation, well stimulation and work over planning
5 days 20 hrs. 550
This is the standard course calendar. Visit our website to see the updates and the new courses.
* Schedule and prices are subject to change without prior notice. In case of any dispute, Falcon LLC reserves the right on the final decision. * Delegate can enjoy Early Bird Price (15% off based on the original price) for payment settled 3 weeks prior to the course commencement date. * Delegates can enjoy Group Discount Price (20% off based on the original price) for enrolment of group of 3 or above. All the delegates have to be from the same company, attending same training course and schedule).
Page 15 of 28
Third Quarter 2020 October November December
Starting Day Sunday 3 10 17 24 1 8 15 22 29 5 12 19
Ending day Thursday 8 15 22 29 5 12 19 26 3/12 10 17 24
Course Ref. Course Title Course Duration
Teaching hrs.
Fee (USD $)
Logistics
F-LG01 Early Warning Management 5 days 20 hrs. 550
F-LG02 Discard the Noise of Information 5 days 20 hrs. 550
F-LG03 Operational Planning & Industrial Costing 5 days 20 hrs. 550
F-LG04 Identification of bottlenecks & resolutions 5 days 20 hrs. 550
F-LG05 Design of an Evaluation Assessment System 5 days 20 hrs. 550
F-LG06 Meta-ERP era. Go beyond conventional ERP systems 5 days 20 hrs. 550
F-LG07 On-time Delivery Performance Improvement 5 days 20 hrs. 550
F-LG09 Flexible Budgeting 5 days 20 hrs. 550
F-LG10 Red Queen's Tale-A methodology to Change Management
5 days 20 hrs. 550
F-LG11 Effective Purchasing and Contract Negotiation Strategies
5 days 20 hrs. 550
F-LG12 Inventory Management 5 days 20 hrs. 550
F-LG13 Best Procurement Practices 5 days 20 hrs. 550
Page 16 of 28
October November December
Starting Day Sunday 3 10 17 24 1 8 15 22 29 5 12 19
Ending day Thursday 8 15 22 29 5 12 19 26 3/12 10 17 24
Course Ref. Course Title Course Duration
Teaching hrs.
Fee (USD $)
Mechanical Engineering
F-ME01 Basic Operation and Theory of Steam and Gas
Turbines, Co-Generation and Combined Cycle Plants 5 days 20 hrs. 550
F-ME02 Bearing Lubrication, Installation, Inspection, Maintenance, Troubleshooting & Failure Analysis
5 days 20 hrs. 550
F-ME03 Certified Boiler Operation, Instrumentation & Control 5 days 20 hrs. 550
F-ME04 Compressor Operation, Practice, and Maintenance 5 days 20 hrs. 550
F-ME05 Design And Fabrication Shell-and-Tube Heat Exchangers In Accordance To ASME & TEMA Codes
5 days 20 hrs. 550
F-ME06 Heat Exchanger Design, Operation, Performance, Inspection, Maintenance & Repair
5 days 20 hrs. 550
F-ME07 Heat Exchangers Maintenance and Troubleshooting 5 days 20 hrs. 550
F-ME08 Mechanical Integrity & Reliability in Refineries, Petrochemical & Process Plant
5 days 20 hrs. 550
F-ME09 Practical Pump Technology: Selection, Operation & Maintenance
5 days 20 hrs. 550
F-ME10 Practical Pumps Technology: Selection, Application, Operation, Troubleshooting & Maintenance
5 days 20 hrs. 550
F-ME11 Principles of Rotating Equipment 5 days 20 hrs. 550
F-ME12 Reciprocating Compressors: Operation and Maintenance
5 days 20 hrs. 550
F-ME13 Rotating Equipment Reliability Optimization 5 days 20 hrs. 550
F-ME14 Rotating Equipment: Selection, Operation, Troubleshooting & Effective Predictive Maintenance
5 days 20 hrs. 550
F-ME15 Welding and welding technology 5 days 20 hrs. 550
Page 17 of 28
October November December
Starting Day Sunday 3 10 17 24 1 8 15 22 29 5 12 19
Ending day Thursday 8 15 22 29 5 12 19 26 3/12 10 17 24
Course Ref. Course Title Course Duration
Teaching hrs.
Fee (USD $)
Environmental
F-ENV01 CEMS Operations and Maintenance 5 days 20 hrs. 550
F-ENV02 Air dispersion modelling 5 days 20 hrs. 550
F-ENV03 Air pollution- Refinery Emission estimation 5 days 20 hrs. 550
F-ENV04 Best Available Techniques for Energy Efficiency 5 days 20 hrs. 550
F-ENV05 Best Available Techniques for Large Combustion Plans 5 days 20 hrs. 550
F-ENV06 Best Available Techniques for Refining 5 days 20 hrs. 550
F-ENV07 Design and operation of WWTP 5 days 20 hrs. 550
F-ENV08 Environmental Impact Assessment (EIA) 5 days 20 hrs. 550
F-ENV09 Ground water monitoring 5 days 20 hrs. 550
F-ENV10 Ground water remediation techniques 5 days 20 hrs. 550
F-ENV11 Hazardous Waste Management 5 days 20 hrs. 550
F-ENV12 Industrial Waste management 5 days 20 hrs. 550
F-ENV13 Odour Control 5 days 20 hrs. 550
F-ENV14 Oil spill contingency planning 5 days 20 hrs. 550
F-ENV15 Oil Spill Management & Response (IMO Certification) 5 days 20 hrs. 550
F-ENV16 Oily WWTP design, operation and monitoring 5 days 20 hrs. 550
F-ENV17 Physical and technological disasters 5 days 20 hrs. 550
F-ENV18 Soil remediation 5 days 20 hrs. 550
F-ENV19 Storm water management 5 days 20 hrs. 550
F-ENV20 Sustainability and Green Building 5 days 20 hrs. 550
F-ENV21 Waste Water Treatment & Technology 5 days 20 hrs. 550
F-ENV22 Wastewater Treatment, Management and Recycling 5 days 20 hrs. 550
Page 18 of 28
October November December
Starting Day Sunday 3 10 17 24 1 8 15 22 29 5 12 19
Ending day Thursday 8 15 22 29 5 12 19 26 3/12 10 17 24
Course Ref. Course Title Course Duration
Teaching hrs.
Fee (USD $)
Water and Wastewater
F-WM01 Design and operation of WWTP 5 days 20 hrs. 550
F-WM02 Odour Control 5 days 20 hrs. 550
F-WM03 Oily Water Treatment Technology 5 days 20 hrs. 550
F-WM04 Oily WWTP design, operation and monitoring 5 days 20 hrs. 550
F-WM05 Storm water management 5 days 20 hrs. 550
F-WM06 Waste Water Treatment & Technology 5 days 20 hrs. 550
F-WM07 Wastewater Treatment, Management and Recycling 5 days 20 hrs. 550
F-WM08 Water Audit & Leak Detection 5 days 20 hrs. 550
F-WM09 Water Desalination Technologies 5 days 20 hrs. 550
F-WM10 Water Distribution Systems & Pumping Stations 5 days 20 hrs. 550
F-WM11 Water treatment processes 5 days 20 hrs. 550
Together we can design customized solutions for all your training needs and you get personal consultation directly from our instructors.
Page 19 of 28
October November December
Starting Day Sunday 3 10 17 24 1 8 15 22 29 5 12 19
Ending day Thursday 8 15 22 29 5 12 19 26 3/12 10 17 24
Course Ref. Course Title Course Duration
Teaching hrs.
Fee (USD $)
Health, Safety and Environmental
F-HSE01 Industrial Hygiene 5 days 20 hrs. 550
F-HSE02 Air dispersion modelling 5 days 20 hrs. 550
F-HSE03 Air pollution- Refinery Emission estimation 5 days 20 hrs. 550
F-HSE04 CEMS Operations and Maintenance 5 days 20 hrs. 550
F-HSE05 Certified HAZOP Leader 5 days 20 hrs. 550
F-HSE06 Certified Occupational Health, Safety & Industrial Hygiene
5 days 20 hrs. 550
F-HSE07 Chemical, Biological, Radiological and Nuclear Material Handling (HAZMAT/HAZCOM)
5 days 20 hrs. 550
F-HSE08 Design and operation of WWTP 5 days 20 hrs. 550
F-HSE09 Environmental Impact & Life Cycle Assessments (ISO 14001/14040/14041)
5 days 20 hrs. 550
F-HSE10 Environmental Impact Studies 5 days 20 hrs. 550
F-HSE11 Ground water monitoring 5 days 20 hrs. 550
F-HSE12 Ground water remediation techniques 5 days 20 hrs. 550
F-HSE13 Hazardous Waste Management & Pollution Prevention
5 days 20 hrs. 550
F-HSE14 Odour Control 5 days 20 hrs. 550
F-HSE15 Offshore Safety, Risk & Reliability 5 days 20 hrs. 550
F-HSE16 Oil spill contingency planning 5 days 20 hrs. 550
F-HSE17 Oil Spill Management & Response (IMO Certification)
5 days 20 hrs. 550
F-HSE18 Oily WWTP design, operation and monitoring 5 days 20 hrs. 550
F-HSE19 Physical and technological disasters 5 days 20 hrs. 550
F-HSE20 Quantitative Risk Assessment (QRA) in Process Plants
5 days 20 hrs. 550
Page 20 of 28
October November December
Starting Day Sunday 3 10 17 24 1 8 15 22 29 5 12 19
Ending day Thursday 8 15 22 29 5 12 19 26 3/12 10 17 24
Course Ref. Course Title Course Duration
Teaching hrs.
Fee (USD $)
Health, Safety and Environmental
F-HSE21 Radiation Protection Officer (RPO) 5 days 20 hrs. 550
F-HSE22 Soil remediation 5 days 20 hrs. 550
F-HSE23 Storm water management 5 days 20 hrs. 550
F-HSE24 Sustainability and Green Building 5 days 20 hrs. 550
F-HSE25 Waste Water Treatment & Technology 5 days 20 hrs. 550
F-HSE26 Wastewater Treatment, Management and Recycling
5 days 20 hrs. 550
F-HSE27 Fires, Explosion and Toxic Gas Dispersions: Effects & Consequences Calculations
5 days 20 hrs. 550
F-HSE028 Emergency Response Planning 5 days 20 hrs. 550
F-HSE029 HAZOP Training 5 days 20 hrs. 550
F-HSE030 Process Safety Management 5 days 20 hrs. 550
Page 21 of 28
October November December
Starting Day Sunday 3 10 17 24 1 8 15 22 29 5 12 19
Ending day Thursday 8 15 22 29 5 12 19 26 3/12 10 17 24
Course Ref. Course Title Course Duration
Teaching hrs.
Fee (USD $)
Maintenance and Facilities Management
F-MF01 Excellence in Maintenance & Reliability Management: Rotating Equipment Reliability Optimization & Continuous Improvement
5 days 20 hrs. 550
F-MF02 Precision, Preventive & Predictive Maintenance 5 days 20 hrs. 550
F-MF03 Excellence in Reliability, Availability & Maintainability (RAM)
5 days 20 hrs. 550
F-MF04 Machinery Failure Analysis, Prevention & Troubleshooting: Machinery Diagnostics and Root Cause Failure Analysis (RCFA)
5 days 20 hrs. 550
F-MF05 Machinery Failure, Vibration & Predictive Maintenance
5 days 20 hrs. 550
F-MF06 Maintenance Optimization & Best Practices 5 days 20 hrs. 550
F-MF07 Material Cataloguing, Specifications, Handling & Storage
5 days 20 hrs. 550
F-MF08 Root Cause Analysis (Apollo Method) 5 days 20 hrs. 550
Visit our website https://falcon-professionals.com for the
latest updates and new courses
Page 22 of 28
October November December
Starting Day Sunday 3 10 17 24 1 8 15 22 29 5 12 19
Ending day Thursday 8 15 22 29 5 12 19 26 3/12 10 17 24
Course Ref. Course Title Course Duration
Teaching hrs.
Fee (USD $)
Laboratory Management and Instrumentation
F-LMI01 Advanced Statistical Analysis of Laboratory Data
5 days 20 hrs. 550
F-LMI02
Advanced Statistical Analysis of Laboratory Data: Method Development, Method Validation, Uncertainty, Calibration, SQC and Data Interpretation
5 days 20 hrs. 550
F-LMI03 Analytical Chemistry refresh for laboratory technicians
5 days 20 hrs. 550
F-LMI04 Analytical Instrumentation for Laboratory 5 days 20 hrs. 550
F-LMI05 Analytical Methods, Procedures, Quality Control, Technology, Analysis & Best Practice
5 days 20 hrs. 550
F-LMI06 GC/MS-Principles, instrumentation and quantitative analysis
5 days 20 hrs. 550
F-LMI07 ISO 17025 and Good Laboratory Practices 5 days 20 hrs. 550
F-LMI08 ISO 17025 Internal Auditor 5 days 20 hrs. 550
F-LMI09 Laboratory Information Management System (LIMS)
5 days 20 hrs. 550
F-LMI10 Laboratory Instrument Calibration 5 days 20 hrs. 550
F-LMI11
Modern Chemical Laboratory: Analytical Instrumentation, Equipment Calibration, Operations, Quality & Safety
5 days 20 hrs. 550
F-LMI12 Modern Laboratory Management: Effective Management of the Chemical Analysis Support
5 days 20 hrs. 550
F-LMI13 Modern Laboratory Safety & Health 5 days 20 hrs. 550
F-LMI14 Natural and refinery gases analysis 5 days 20 hrs. 550
F-LMI15 Practical Problem Solving in Chemical Analysis 5 days 20 hrs. 550
F-LMI16 Principle and Chemistry of Instrumental Analysis
5 days 20 hrs. 550
F-LMI17 Refinery laboratory technician training 5 days 20 hrs. 550
F-LMI18 Total Quality Management and Laboratory Operation
5 days 20 hrs. 550
F-LMI19 Water and waste water analysis 5 days 20 hrs. 550
Page 23 of 28
October November December
Starting Day Sunday 3 10 17 24 1 8 15 22 29 5 12 19
Ending day Thursday 8 15 22 29 5 12 19 26 3/12 10 17 24
Course Ref. Course Title Course Duration
Teaching hrs.
Fee (USD $)
Soft Skills
F-SS01 Achieving Leadership Excellence 5 days 20 hrs. 550
F-SS02 Excellence in Leadership & Teambuilding 5 days 20 hrs. 550
F-SS04 Quality Assurance & Control 5 days 20 hrs. 550
F-SS05 Strategy & Strategic Planning 5 days 20 hrs. 550
F-SS06 Leadership Skills Advanced 5 days 20 hrs. 550
F-SS07 Employee Relations Management 5 days 20 hrs. 550
F-SS08 Operational Change Management 5 days 20 hrs. 550
Quality Systems
F-QS01 Advanced Statistical Analysis of Laboratory Data
5 days 20 hrs. 550
F-QS02 Data Analysis Techniques 5 days 20 hrs. 550
F-QS03 Environmental management systems ISO14000 series
5 days 20 hrs. 550
F-QS04 Green procurement 5 days 20 hrs. 550
F-QS05 ISO 14001 Internal Auditor 5 days
20 hrs. 550
F-QS07 ISO 9001 system 5 days 20 hrs. 550
F-QS08 Total Quality Management 5 days 20 hrs. 550
F-QS09 Total Quality Management and Laboratory Operation
5 days 20 hrs. 550
F-QS10 Uncertainty of Measurement and Method Validation in Accordance to ISO 17025
5 days 20 hrs. 550
F-QS11 Workshop on Statistical Analysis of Laboratory Data and Quality Control Charts
5 days 20 hrs. 550
Page 24 of 28
October November December
Starting Day Sunday 3 10 17 24 1 8 15 22 29 5 12 19
Ending day Thursday 8 15 22 29 5 12 19 26 3/12 10 17 24
Course Ref. Course Title Course Duration
Teaching hrs.
Fee (USD $)
Process Engineering
F-PE01 Energy Conservation Optimization for Fired Heaters Process
5 days 20 hrs. 550
F-PE02 Certified Process Safety Management (PSM) - Advanced
5 days 20 hrs. 550
F-PE03 Chemical Engineering for Non-Chemical Engineers 5 days 20 hrs. 550
F-PE04 Crude Oil Storage Facilities: Operations, Control & Troubleshooting
5 days 20 hrs. 550
F-PE05 Distillation-Column Operation, Control & Troubleshooting
5 days 20 hrs. 550
F-PE06 Oil Movement, Storage & Troubleshooting 5 days 20 hrs. 550
F-PE07 Oily Water Treatment Technology 5 days 20 hrs. 550
F-PE08 Operation of Process Equipment: Fired Heaters, Air Coolers, Heat Exchangers, Pumps, Compressors, Crude Desalter, Pressure Vessels & Valves
5 days 20 hrs. 550
F-PE09 Polymer technology 5 days 20 hrs. 550
F-PE10 Principles of Operations Planning 5 days 20 hrs. 550
F-PE11 Process Control, Instrumentation, Troubleshooting & Problem Solving
5 days 20 hrs. 550
F-PE12 Process Energy Efficiency Improvement for Industrial Plants
5 days 20 hrs. 550
F-PE13 Process Equipment Design, Applications, Maintenance & Troubleshooting: Rules of Thumb for Process Engineers
5 days 20 hrs. 550
Page 25 of 28
October November December
Starting Day Sunday 3 10 17 24 1 8 15 22 29 5 12 19
Ending day Thursday 8 15 22 29 5 12 19 26 3/12 10 17 24
Course Ref. Course Title Course Duration
Teaching hrs.
Fee (USD $)
Process Engineering
F-PE15 Process Plant Optimization Technology & Continuous Improvement
5 days 20 hrs. 550
F-PE16 Process Plant Optimization, Revamping & Debottlenecking
5 days 20 hrs. 550
F-PE17 Process Plant Performance & Efficiency 5 days 20 hrs. 550
F-PE18 Process Plant Start-up, Commissioning & Troubleshooting
5 days 20 hrs. 550
F-PE19 Process Plant Troubleshooting & Engineering Problem Solving
5 days 20 hrs. 550
F-PE20 Reactors: Operation, Troubleshooting, Start-Up & Shutdown
5 days 20 hrs. 550
F-PE21 Quantitative Risk Assessment (QRA) in Process Plants 5 days 20 hrs. 550
F-PE22 Troubleshooting Process Operations 5 days 20 hrs. 550
F-PE23 Tank gauging 5 days 20 hrs. 550
F-PE24 Flare, Blowdown & Pressure Relief Systems 5 days 20 hrs. 550
F-PE25 Aspen HYSYS Dynamics: Introduction to Dynamic Modelling.
5 days 20 hrs. 550
F-PE26 Aspen HYSYS: Advanced Process Modelling Topics 5 days 20 hrs. 550
Page 26 of 28
October November December
Starting Day Sunday 3 10 17 24 1 8 15 22 29 5 12 19
Ending day Thursday 8 15 22 29 5 12 19 26 3/12 10 17 24
Course Ref. Course Title Course Duration
Teaching hrs.
Fee (USD $)
Project Management
F-PM01 Risk Management Professional Certification 5 days 20 hrs. 550
F-PM02 Certified Project Leader: Project Planning, Scheduling, Monitoring, Reporting & Control
5 days 20 hrs. 550
F-PM03 Mastering Project Management 5 days 20 hrs. 550
F-PM04 Project Risk Analysis & Management 5 days 20 hrs. 550
F-PM05 Risk Management (ISO 31000) 5 days 20 hrs. 550
F-PM06 Warehouse Operations and Management 5 days 20 hrs. 550
F-PM07 Construction Management 5 days 20 hrs. 550
F-PM08 Shut down & Turn around Management 5 days 20 hrs. 550
F-PM09 Project Site Supervisors 5 days 20 hrs. 550
Page 27 of 28
October November December
Starting Day Sunday 3 10 17 24 1 8 15 22 29 5 12 19
Ending day Thursday 8 15 22 29 5 12 19 26 3/12 10 17 24
Course Ref. Course Title Course Duration
Teaching hrs.
Fee (USD $)
Upstream
F-UP01 High Pressure High Temperature Drilling (HPHT) 5 days 20 hrs. 550
F-UP02 Subsurface Production Operations 5 days 20 hrs. 550
F-UP03 Management of reservoir condensates 5 days 20 hrs. 550
F-UP04 Well Integrity management 5 days 20 hrs. 550
F-UP05 X-mas tree and wellhead operation, maintenance and testing
5 days 20 hrs. 550
F-UP06 Drilling Fluids 5 days 20 hrs. 550
F-UP07 Well completion design and operation, well stimulation and work over planning
5 days 20 hrs. 550
This is the standard course calendar. Visit our website to see the updates and the new courses.
* Schedule and prices are subject to change without prior notice. In case of any dispute, Falcon LLC reserves the right on the final decision. * Delegate can enjoy Early Bird Price (15% off based on the original price) for payment settled 3 weeks prior to the course commencement date. * Delegates can enjoy Group Discount Price (20% off based on the original price) for enrolment of group of 3 or above. All the delegates have to be from the same company, attending same training course and schedule).
Page 28 of 28
Contact Us Field of interest
In accordance with the Data Protection Law Falcon Consulting Professionals LLC will hold and use the data contained on this form for administration purposes, to keep you informed of its activities, and offer goods and services provided Falcon Consulting Professionals LLC. If you would prefer not to receive Falcon Consulting Professionals LLC product and service literature mark the box
Scan or photo this page and sent it to: [email protected]
Course Enquiry Form