employee welfare project
TRANSCRIPT
PROJECT REPORT 2011
CHAPTER I
INTRODUCTION
The project is intended to access and to acquire the knowledge
regarding the functional as well as the management aspects of the firm. The
project is a study on labour welfare measures on the employees of
Hi-Care Polymers Pvt Ltd, Palakuzha in Koothattukulam, Kerala.
Employee is an indispensable factor in production. Organization
would be effective only when there is high degree of co-operation between
employee and management. Management seeks co-operation of labour force
by providing various welfare measures. These welfare activities go a long
way in stimulating interest in the workers to produce at their full capacity
and pay a good dividend to the management in the long run.
Management scholars agree that employee welfare activities act as
motivators and result in higher productivity and profit. The importance of
labour welfare was regarded as wise investment that should and usually
does bring a profitable return in the form of greater efficiency. It may
include not only the minimum standard of hygiene and safety laid down in
general regulation but also such aspects of working life on social insurance
schemes, measures for the protection of women and young workers,
limitation of hours of work paid vacation.
In the narrow sense welfare in addition to general physical working
conditions is mainly concerned with day-to-day problems of the workers
and the social relationships at the place of work. Labour welfare is an
important facet of industrial relations, the extra dimension, giving
satisfaction to a worker in a way which even good wages cannot.
Mar Augusthinose College, Ramapuram 1
PROJECT REPORT 2011
STATEMENT OF THE PROBLEM
In HI-CARE POLYMERS the manufacturing activity is mainly
depend on the efficiency of the employees. This study is undertaken with a
view to understand the different welfare measures taken and facilities
provided by the company. Gather the opinion of the employees about these
facilities and also to know the reason for the dissatisfaction, if any.
SCOPE OF LABOUR WELFARE
Labour welfare facilities have a great scope to develop a sense of
responsibilities and dignity among the workers enabling them to be worthy
and enlightened citizens. HI-CARE POLYMERS also needs to make a
study about employees attitudes towards the welfare amenities provided to
them. All such aspects help to reduce industrial strike and peace in the
industrial organization.
SIGNIFICANCE OF LABOUR WELFARE
The logic behind providing welfare facilities is to create efficient,
healthy, loyal and satisfied work force for the organization and also for the
nation. Employees are important stakeholders. Labour welfare measures are
endeavoring to establish effective systems for performance evaluation. It
helps to increase employee’s productivity efficiency and protect workers
from social evils. It helps to enhance goodwill and public image of the
organization. Also it helps to improve industrial relations and peace.
OBJECTIVES OF THE STUDY
General Objective:
To study about effectiveness of labour welfare measures.
Mar Augusthinose College, Ramapuram 2
PROJECT REPORT 2011
Specific Objectives:
1) To identify the welfare facilities provided in the organization.
2) To find out the employees level of satisfaction through the welfare
measures.
3) To find out the draw backs in current welfare measures.
4) To know the suggestions and recommendations of the employees.
5) To put forward the matters to be rectified and further welfare
measures to be adopted.
DURATION OF THE STUDY
Duration of the study was for a period of two months.
LIMITATIONS OF THE STUDY
The workers are fear to answer certain questions, because they
thought that it will affect their job.
Time constraint is another limiting factor. The respondents could be
approached only during break hours and also there was a specified
time to complete the project in the organization.
Inferences were drawn from a sample. Generalization is not free
from sampling errors, so the navigator should not go deep into total
position.
Management did not disclose the confidential reports.
The navigator has to depend mainly on primary data.
The attitude, views and thinking pattern of each person is different.
This is reflected in their answers also.
Mar Augusthinose College, Ramapuram 3
PROJECT REPORT 2011
CHAPTER SCHEME
Labour welfare study is divided into 9 chapters:
The first chapter deals with introduction, statement of the problem,
scope of the study, significance of the study, objectives of the study,
duration of the study, limitations of the study and chapter scheme.
The second chapter covers the industrial profile.
The third chapter covers the industrial profile.
The fourth chapter deals with literature review of labour welfare.
The fifth chapter includes the research methodology.
The sixth chapter measures the opinion of the employees about
welfare measures according to the various aspects and the
interpretation and analysis.
The seventh chapter contains the findings from analysis.
The eighth chapter contains the suggestions of the study.
The ninth chapter includes the conclusion of the study.
Mar Augusthinose College, Ramapuram 4
PROJECT REPORT 2011
CHAPTER II
INDUSTRY PROFILE
HISTORY AND BACKGROUND OF LATEX GLOVES
Latex is made from the sap of rubber trees called Hevea Brasiliensis
(Brazilian Rubber). Latex rubber has a milky white appearance and is made
of various lipids, phospholipids and proteins. This protein causes allergic
reactions to some people who are sensitive to latex.
Since the mid 1900s, latex gloves have been primarily manufactured
in Malaysia. Malaysia continues to be a dominant supplier of latex gloves
because the country is a key player of raw latex production. From a
business stand point, it makes sense to manufacture goods in close
proximity to raw materials to reduce cost.
The use of latex as the preferred material for medical gloves ramped
up due to the scare of contracting AIDS or HIV. At the time, latex became
the barrier of choice for the medical industry and there was a rush to
manufacturer latex gloves as demand soared. As a result, in the late 1980s
and early 1990s, there were sudden increases in reported cases of latex
reactions.
The quantity of latex examination gloves was produced at steady
rates until the early 1990s where demand for latex gloves sky-
rocketed. This demand was driven by an increase public awareness of HIV
and the risks healthcare professionals faced. For this reason, hospitals
sought out quality latex medical examination gloves in increased numbers
putting pressure on the available supply. Soon thereafter, many other
professionals like dentists, rescue workers, and police officers began
Mar Augusthinose College, Ramapuram 5
PROJECT REPORT 2011
wearing latex gloves adding to the growing demand. Production capabilities
expanded in Malaysia and other countries to meet this demand.
At this time, latex gloves had minimal regulation and pinholes, rips,
and other imperfections were not an uncommon occurrence. To make
matters worse, people started to complain about having sensitivity to the
latex gloves showing symptoms of allergic reactions. Looking at the
manufacturing process of latex gloves, it is not surprising that many gloves
were causing issues because certain steps in the process of making latex
gloves involve minimizing the occurrence of latex allergies. Since these
steps were expensive, many factories minimized their costs by shortening or
ignoring. Over time, the FDA began regulating the quality of examination
gloves produces forcing factories to conform to standards set. Today, all
medical-grade examination gloves must pass through a series of tests to be
sold in the U.S. market.
The hazards of latex protein were not secret. In fact, the removal of
the hazardous protein is one of the steps for manufacturers when creating
latex gloves. This process is called leaching which removes water-soluble
chemicals and latex protein from the gloves. Unfortunately, this process
does not remove all the protein found in latex gloves.
GLOVES PRODUCT MARKET
India is a major market for many kinds of Gloves, surgical,
examination, industrial, electrical, and household ones being the star
performers. With a vast population of more than 1000 million, India is a
large consumer of health care products. Surgeons in thousands of hospitals
in the Government as well as the private sector invariably don surgical
gloves before taking up the scalpel every day.
Mar Augusthinose College, Ramapuram 6
PROJECT REPORT 2011
With a population of over 1 billion, India possesses an excellent
internal market. The concept of disposable surgical glove is catching on and
if its use gathers momentum, one could see a virtual explosion in
consumption with in the country. With the increase in the purchasing power
of the mighty Indian middle class, one can foresee definite growth –related
inducements to relocate manufacturing facilities to India.
Some portion of the production is exported every year, while their
imports also take place to make good deficiency in domestic supply. India
exported surgical gloves worth Rs.695 million in 2008-2009, against Rs.
515 million during 2007-2008.
Over two decade back India had to depend on imports for her
requirements of several rubber products including dipped goods. Now our
latex industries are capable of catering almost entire needs of the home
market and made appreciable progress in the export front. Hygienic material
and surgical articles including surgical gloves are exported to several
countries, which mainly include USA, Middle East, and south East Asian
countries. The following table gives the world demand and growth of world
demand of gloves.
GLOBAL GROWTH OF GLOVES DEMAND
COUNTRIES YEAR (Million Pairs)
2005 2007 2009
N. AMERICA 16940 20175 22670
EEC,W.EUROPEAN 6480 7505 8275
ASIA/PASCIFIC 470 610 720
OTHERS 639 732 798
TOTAL 24529 29022 32463
Mar Augusthinose College, Ramapuram 7
PROJECT REPORT 2011
Out of the total world demand for gloves 70% of it’s from North
American countries, mainly from US market. From the total demand for
latex products in the US market, gloves products had major share. India’s
share in the world market is negligible now, around 3% of the total. This
low share is not the country’s weakness but the ample scope for improving
the share in the near future.
INDIAN SENARIO AND GROWTH POTENTIALS
With the excellent quality of locally available latex, well-trained
personnel, adequate facilities for Research and Development, a well-defined
legal system, changed mindset of the government due to globalization and
improved infrastructure, India could well shape up into an excellent
manufacturing base for gloves. The Indian labour is comparatively cheap
and can be well –disciplined if proper amenities are provided. The
government policy is also helpful.
The Indian Rubber Board is playing a positive role, realizing the
excellent prospectus; the board has very actively and vigorously interacting
with the respective government agencies to see that an excellent atmosphere
is created in terms of customer –friendly attitude.
The Indian gloves industry is now at the threshold of big opening to
the world market. If India can produce quality gloves in accordance with
the specification of consumers to the standardized specification confirming
either to the ASTM (American Society for testing Methods) standard or ISI
specifications, the market can developed much further and the share of
Indian gloves in the world market can be improved several times in the near
future. The Malaysia, which is the largest producer of gloves in the world
facing the several problems such as quality labour, infrastructure, etc. but
India, has no such problem.
Mar Augusthinose College, Ramapuram 8
PROJECT REPORT 2011
Due to the global trade scenario, all the trade restriction between
India and other countries will cease to exist, expecting for the tariff
regulations, free import and export will take place. Prospects for enhanced
imports loom large. We have to endeavor attaining a matching export
operation. Gloves supply is one area, which can gain substantially from
sales abroad. For this the country has to enhance production considerably,
to offer sustainable supply of quality material.
MANUFACTURING PROCESS OF LATEX GLOVES
Today, the process for manufacturing gloves is a simple process. For
a step-by-step illustration of how latex gloves are made, the raw material
harvested is latex; however, to make latex into a favorable glove material, it
must be formulated with chemical compounds. This ensures the final glove
product has increased tensile strength and flexibility. This formulation plays
a major role in determining the quality of the final glove produced.
To make latex into a glove form, molds called formers are
used. These formers determine the texture on the product as well as what
size the glove will be. The formers pass through a production line where
they are dipped into the latex liquid formulation. The speed of the line will
determine the thickness (measured in mil) of the glove which is correlated
to the strength.
After the forming process is complete, the gloves need to remove
harsh chemicals through vulcanization and leaching process. It is during the
leaching phase where protein is minimized. Once the gloves pass through
these stages, they are washed and dried before they are inspected for testing.
Mar Augusthinose College, Ramapuram 9
PROJECT REPORT 2011
EXAMINATION GLOVES
In general, examination gloves are disposable intended for one time
use. Disposable gloves were originally used to provide protection against
biological or chemical hazards. However, since disposable gloves have
become quite cheap over the years, disposable examination gloves can be
feasibly used for everyday tasks. This precaution allows healthcare workers
to remain protected from harmful chemicals or blood borne pathogens while
examination gloves are donned.
It is not uncommon for healthcare facilities to stock multiple types of
examination gloves. A facility that primarily utilizes latex examination
gloves will have synthetic options to accommodate workers who are either
allergic or sensitive to latex. Hospitals that only use latex-free gloves may
use a combination of vinyl and nitrile gloves to remain cost-effective.
Healthcare facilities that have laboratories or oncology departments will use
nitrile examination gloves to protect clinicians from harmful chemicals like
chemotherapy drugs.
TYPES OF EXAMINATION GLOVES
There are 3 major types of exam glove based on material:
1. Latex Examination gloves
Latex is the original material used to create medical gloves. Due to
the great durability and flexibility of natural rubber, latex gloves continue to
be used in the medical industry.
Latex disposable examination gloves have been the traditional choice
for the healthcare industry for over 100 years. Although concerns regarding
latex allergies continue, latex gloves are unsurpassed when it comes to
durability, tactile sensitivity, comfort, and fit.
Mar Augusthinose College, Ramapuram 10
PROJECT REPORT 2011
Making latex examination gloves is a multi-stage process to ensure
quality; medical-grade gloves are produced. The quality of gloves will
differ based on how the factories treat each manufacturing stage.
Latex examination gloves manufacturing start from collecting the
raw material needed which is natural rubber. After workers tap the rubber
trees for latex sap, the materials are sent to the glove factories where they
will be combined according to the glove specifications. At the glove
factories, exam glove formers go through stages of dipping, powdering,
rinsing, and drying until latex gloves are made.
2. Vinyl / Synthetic Examination gloves
Vinyl gloves are made from the synthetic material polyvinyl chloride
(PVC), commonly called vinyl. Due to concerns of latex allergies
healthcare facilities have been transitioning to synthetic alternatives like
vinyl. Today, vinyl gloves are the most cost effective examination gloves
available.
Disposable vinyl gloves are the most economical gloves for cost
conscious facilities. Made from poly vinyl chloride material or PVC, these
examination gloves provide standard barrier protection. In addition to being
comfortable to wear, vinyl gloves have a soft feel. For a great value latex-
free choice, vinyl examination gloves are the way to go.
It is important to note that as with all glove types, the quality levels
seen on vinyl gloves will vary. Years ago, vinyl gloves provided minimal
protection and were not recommended to be used in general. Today, the
glove industry has improved technology by creating stretch vinyl-synthetic
material to provide comparable protection to latex gloves. All vinyl gloves
labeled as examination gloves undergo must pass through same standard
Mar Augusthinose College, Ramapuram 11
PROJECT REPORT 2011
tests as nitrile and latex examination gloves. For this reason, many facilities
are using vinyl gloves as the preferred latex-free choice.
Even though the vinyl glove has evolved over the years, this glove
should not be used in high-risk or hazardous conditions. Vinyl provides
weaker chemical protection and should not be used when handling
chemotherapy drugs. However, vinyl examination gloves are suitable in
most scenarios within the hospital environment and thus recommended.
One of the most important characteristics of vinyl examination gloves is the
latex-free claim.
3. Nitrile Examination gloves
Healthcare facilities that have laboratories or oncology departments
will use nitrile examination gloves to protect clinicians from harmful
chemicals like chemotherapy drugs. 6 percent of the general populated have
latex allergy and as many as 17% of health care workers are reported to be
affected. Replacing latex gloves with nitrile gloves will help make the
clinical environment safer for staff and patients with latex allergies without
sacrificing the quality of gloves.
a) Sterile Examination gloves
Sterile examination gloves are medical gloves that have been
sterilized. Sterile gloves are used whenever working with patients with open
wounds to prevent infections. Most brands of examination gloves are
available in sterile versions.
b) Surgical Gloves
Surgical gloves are medical gloves used by surgeons during
operations. Surgical gloves are higher quality and more expensive per glove
compared with examination gloves.
Mar Augusthinose College, Ramapuram 12
PROJECT REPORT 2011
WHY LATEX-FREE?
“Our facility needs to become latex-free!” How many times have
you heard someone make this statement? Latex-free has become the new
trend in the healthcare industry and every day, more and more hospitals are
jumping on the bandwagon for one reason… to prevent latex allergies.
The healthcare industry is pushing for a latex-free environment to
minimize workers from developing latex related allergies including irritant
contact dermatitis and allergic contact dermatitis. Symptoms range from
skin redness to respiratory symptoms and in rare cases shock. As
individuals are exposed to latex frequently, they can develop sensitivity and
eventually become allergic.
WHO SHOULD BE CONCERNED?
Anyone who has frequent exposure to latex is at risk for developing
latex allergy. This means healthcare workers (nurses, physicians, dentists,
and laboratory technicians) who wear latex examination gloves are highly
affected. About 5-10% of health care providers have developed latex
allergy.
LATEX-FREE ALTERNATIVES
Due to concerns of latex allergies, latex-free glove production has
increased. Today, vinyl and nitrile material has become the material of
choice for latex-free alternatives. Combined with improved technologies,
latex-free gloves have become just as effective, if not more, as latex gloves
as a barrier of protection.
Mar Augusthinose College, Ramapuram 13
PROJECT REPORT 2011
CHAPTER III
COMPANY PROFILE
Back Ground of the Company and Details of Promoters
Hi-care Polymers Pvt. Ltd situated at Koothattukulam, in Ernakulum
Dt. is manufacturing Latex Medical Surgical Gloves, and latex examination
gloves. It started its commercial production in the year 2003. The Hi-Care
Polymers is promoted by Johns A Neerakal, a graduate in commerce having
more than 20 years experience in dipped goods production facility and well
expert in export trading. Mr. Johns promoted two more Gloves
manufacturing units in the Name and style Hi-care Gloves Pvt. Ltd Situated
in Marangatupilly, in Kottayam Dt. and Hi-Care Latex Pvt. Ltd situated at
Coimbatore in Tamilnadu.
Nothing but the strict adherence toward quality maintaining and
keenness to update according to the changes for the impressive growth in
business. Hi-care Polymers on its each and every phase of growth were
adamantly keen to manage healthy network knitting together the directors,
suppliers, dealers and employees us maintaining wholesome professional
relationship. And they all together form’s Hi-care Polymers family
hardworking relentlessly for the sake of consumers satisfaction and success
of the organization.
FACTORY LOCATIONS
Hi-Care Polymers has production units located at Koothattukulam,
marangatupilly and Coimbatore.
Mar Augusthinose College, Ramapuram 14
PROJECT REPORT 2011
VISION OF HI-CARE POLYMERS PVT. LTD.
To become a leading player in the manufacturing of surgical and
examination gloves and provide customers durable and world class products
at affordable price.
MISSION OF HI-CARE POLYMERS PVT. LTD.
An organization that operates according to an overall purpose, or
vision
HI-CARE GROUP OF COMPANIES
Hi-care Polymers Pvt. Ltd : Koothattukulam,
Ernakulam, Kerala.
Name & Style Hi-care Polymers Pvt. Ltd : Marangatupilly,
Kottayam, Kerala.
Hi-care Latex Pvt. Ltd : Coimbatore, Tamil Nadu
QUALITY DRIVE
The quality of Hi-care Polymers highlighted by five factors:
Exceptional quality of the raw material
Dedicated R & D.
Unique product design.
Stringent quality control.
Efficient workforce.
Mar Augusthinose College, Ramapuram 15
PROJECT REPORT 2011
Each and every piece is examined minutely for ensuring perfection.
Only then it goes out into the market durable and comfortable to reach its
valued customers.
QUALITY STATEMENT
The quality policy of Hi-care Polymers stands for:
Leadership by example.
Utmost customer satisfaction.
Non-stop quality up gradation.
Assure employee involvement in the quality management system.
Reciprocate by delivering products that moves fast in the market.
QUALITY OBJECTIVE
Increase the turn over by ever year.
Attendant all customer complaints within a short period of time.
Collect suggestions from the employee and utilize for improvement.
INPUTS AND OUTPUTS
Hi-care Gloves Pvt. Ltd is situated in Koothattukulam, Ernakulum
Dt. It is a place which is much accessible to the entire input helps in
production such as raw materials. The main inputs are:
60%centrifuged latex represents about 75% of the production cost
Chemicals
Fire wood
Consumables
Mar Augusthinose College, Ramapuram 16
PROJECT REPORT 2011
Water
electricity
Pollution control systems
Sufficient skilled and unskilled Manpower etc.
The entire output can be much easily shift through transport agents,
railway from kottayam, ship through Kochi port etc.
MANPOWER &ADMINISTRATION
The Company is having 15 Skilled Workers and 75 unskilled
workers doing in 8X3 Shift. The day to day affairs of the company is vest
under the control of General Manager. Manager administration, Accounts
and finance Mangers, Marketing mangers help the general manger in the
day to day workings of the company. The General Manger report to the
Managing Director and who reports to the Board of Directors.
Proper supervision is necessary to the factory employees because a
little carelessness on the part of workers may leads to the wastage of the
product. The workmen are categorized into:
Permanent workers
Probationary workers
Temporary workers
Casual workers etc.
PLANT CAPACITY
Mar Augusthinose College, Ramapuram 17
PROJECT REPORT 2011
The installed capacity of the plant is 75, 000 Pairs of surgical gloves
or 160,000 Pieces of Latex Examination gloves per day in 8X3 shift.
WORKING TIME
Working time for office staff is from 9 am to 5 pm. There are 8x3
shifts for factory workers. There is a break for each 1 hours of work.
METHOD OF WAGE PAYMENT
Time wage system is applicable to all types of workers.
TECHNICAL ASPECTS
Different kinds of gloves such as surgical gloves, Examination
gloves, Industrial gloves, Electrical gloves, Household gloves and gloves
with miscellaneous applications are made in the country.
Among these gloves, Surgical & Examination gloves has significant
role. This is the item that currently commands great demand in the world
resulting from the heightened awareness of HIV, hepatitis etc.
MANUFACTRING PROCESS
Major steps involved in the manufacture of surgical and examination
gloves are narrated in the process flow chart furnished in the annexure. All
the materials used in the preparation of dipping compounds must be
deduced to very small particle size if good quality films are to be obtained.
Rubber chemicals such as accelerators, sulpher, antioxidants, etc are
properly ground in a Ball Mill and then mixed with 60% Centrifuged latex
in a mixing tank with agitator. The solution is filtered and taken to the
emulsion-dipping tank.
Mar Augusthinose College, Ramapuram 18
PROJECT REPORT 2011
The Ceramic formers connected with the holders, which are running
on conyer chain carrying 2200 Formers at a time for Latex Surgical gloves
and Latex Examination Gloves
Ceramic moulds are washed and cleaned and then given a dip in the
coagulant gelatin bath containing solutions of acid and salts of certain
metals. The coagulant will cause a relatively thick sold deposit of latex to
congeal on the surface of the mould. The mould are then dried under hot air
and taken to the latex emulsion dipping tank .The glove moulds going into
the tank after passing through the gelatin dipping tank lift up slowly in
order to prevent the emulsion liquid from dropping too much on the floor.
This action is the most important part of the operation and will determine
the quality of the gloves. Thickness and quality of gloves will vary
depending upon the number of times of dipping and the speed of dipping.
The moulds then move out of the dipping tank and are dried by hot
air and are then taken to the lip/ bead-winding unit. The gloves are then
vulcanized at a temperature of 100 to 130 degree centigrade using steam.
After vulcanization, the gloves are washed with hot water to remove the
protein on the surface and to keep them clean and easy to be removed from
the mould. Chalk or corn powder is then sprayed on to the gloves to remove
the moisture and prevent them from becoming sticky. The gloves are then
released the mould manually and after inspection they are packed for
dispatch.
Mar Augusthinose College, Ramapuram 19
PROJECT REPORT 2011
PROCESS FLOW CHART
Mar Augusthinose College, Ramapuram 20
LATEX RECEPTION
BULKING AND INSPECTION
DEAMMONIATION
ADDITION OF STABILIZER
DRYING
DRYING
DIPPING
WASERVENT TANK
COMPOUNDING
DIPPING IN ADHESIVE BATH
LEACHING
MATURATION
STRAINING
DRYING
RINESE TANK
PROJECT REPORT 2011
Mar Augusthinose College, Ramapuram 21
FLOCKING
VULCANISING
INSPECTION
ACID CLEANING
STRIPPING
FORMER
PACKING
DESPATCH
DUSTING
TESTING
PROJECT REPORT 2011
ORGANISATIONAL CHART
Mar Augusthinose College, Ramapuram 22
BOARD OF DIRECTORS
MANAGING DIRECTOR
FINANCE & ADMINISTRATION
MANAGER
FACTORY / PRODUCTION
MANAGER
OFFICE ASSISTANTS
CLERK
ACCOUNTS OFFICER
CHEMIST
RESEARCH & DEVELOPMENT
MANAGER
LAB ASSISTANTSSUPERVISORS
FOREMANS
GENERAL MANAGER
HR MANAGER
HR EXECUTIVES
OFFICE ASSISTANTS
MARKETING EXECUTIVES
MARKETINGMANAGER
WORKERS
SALES MANAGER
PROJECT REPORT 2011
DEPARTMENTS
The organization is made up of different departments.
Departmentation is the grouping together of similar or logically related
activities. There are several bases for departmentation. Different forms of
departmentation are departmentation by functions, by products, by region,
by process or combination of any of them.
The basic need of departmentation arises because of specialization of
work and limitation on the number of sub-ordinates that can be directly
controlled by the superior. Departmentation makes the work into
manageable units. If there is no departmentation, there would be serious
limitation on the side of the organization.
HI-CARE POLYMERS has five different departments as follows:
Finance and Administration Department
Production department
Marketing Department
Research and Development Department
Human Resource Department
Mar Augusthinose College, Ramapuram 23
PROJECT REPORT 2011
I. FINANCE AND ADMINISTRATION DEPARTMENT
Finance is the life blood of every organization. Finance and
administration manager is in full charge of this department. This department
keeps accounts of all the financial transactions and administrative functions
of the company.
Functions of finance and administration department are as follows:
Dealing of financial and cost accounts.
Administrating the funds of the business.
Wage and salary determination.
Matters related to sales tax.
Planning and organizing.
Controlling.
Finance Department Structure
Mar Augusthinose College, Ramapuram 24
FINANCE & ADMINISTRATION MANAGER
OFFICE ASSISTANCE
CLERK
ACCOUNTS OFFICER
PROJECT REPORT 2011
II. PRODUCTION DEPARTMENT
Production is the primary function of the company. Production
department controls the production process by coordinating the activities of
other departments. This department is headed by the Production Manager. It
is concerned with terms forming the inputs is in the form of raw materials,
labour machinery, men and money into output, goods and services with the
help of certain production process.
Functions of production department are as follows:
Planning for production process
Material indent and receipt
Processing Checking and inspection
Control of non-conforming products
New machinery layout preparation
Preventive and breakdown maintenance
Condition monitoring and overhauling of machinery
Production Department Structure
Mar Augusthinose College, Ramapuram 25
PRODUCTION MANAGER
SUPERVISORS
WORKERS
FOREMANS
PROJECT REPORT 2011
III MARKETING DEPARTMENT
The marketing department is headed by marketing manager. This
department conducts studies to explore new markets and to expand the
existing markets. They also asses the targets fixed for the sales and compare
it with the achievements made. This study helps to analyze and control the
problems faced by the product in the market. The marketing manager gets a
clean picture of the present position.
Marketing Department Structure
Mar Augusthinose College, Ramapuram 26
MARKETING MANAGER
MARKETING EXECUTIVES
SALES MANAGER
PROJECT REPORT 2011
IV. RESEARCH AND DEVELOPMENT DEPARTMENT
The R&D department carries out Research & Development activities
and the results of those activities are transferred to the plants. Quality is
considered as the most effective tool to improve productivity, to achieve
cost effectiveness, to improve profitability and market share and to remain
competitive in the global market. Plant quality assurance manager is in
charge of this department.
Major activities of the R & D department are as follows:
New product development
New compound development
Designing and inspection of new moulds
Selection and evaluation of new materials.
Selection and evaluation of alternative materials
Finishes product listing and analysis
Assisting plants in problem solving
Research & Development Department Structure
Mar Augusthinose College, Ramapuram 27
CHEMIST
RESEARCH & DEVELOPMENT MANAGER
LAB ASSISTANTS
PROJECT REPORT 2011
V. HUMAN RESOURCES DEPARTMENT
Human resource management perceives organizations in their
totality. The HR Department is headed by the Human Resource Manager.
HR Department view people as the most important source of asset to be
used for the benefit of organization and society. The human resource
philosophy of the management aims at formulation of policies that promote
neutrality, mutual respect, mutual rewards and mutual responsibilities.
Human resource Department Structure
Mar Augusthinose College, Ramapuram 28
HR MANAGER
HR EXECUTIVES
OFFICE ASSISTANTS
PROJECT REPORT 2011
FUNCTIONS OF HUMAN RESOURCE DEPARTMENT ARE AS
FOLLOW:
Human Resource planning /Manpower planning.
Recruitment and selection
Induction & orientation.
Training & development
Career planning & development.
Wage and salary administration
Performance appraisal Promotion & transfers.
Compensation & benefits.
Industrial Relations and labor management
Labor Welfare
Employee counseling.
Probation & confirmation.
Suggestion schemes.
Festival advance.
Employee rewards & recognition programs.
Leave policy.
Dealing with absenteeism & employee turnover.
Labour welfare activities.
Disciplinary actions and proceedings
Mar Augusthinose College, Ramapuram 29
PROJECT REPORT 2011
Handling grievances.
Personal accident.
Gratuity.
Exit management system.
RECRUITMENT
Recruitment is the process of searching for prospective employees
and stimulating and encouraging them to apply for jobs in an organization.
Recruitment sources:
The main source of recruitment in Hi-care polymers is external
sources. No special educational qualification is considered during
recruitment of factory workers. The only factor is the ability and
willingness of person to work hard. The minimum age for workers is fixed
as 18 years but no maximum age limit is fixed.
SELECTION
Selection is the process of choosing the most suitable persons out of
the entire applicant. The purpose of selection is to pick up the right person
for the right job and at the right time and at the right place. Selection is an
important function. No organization can achieve its goals without selecting
the right people.
Selection process:
Preliminary interview
Application form
Selection test
Mar Augusthinose College, Ramapuram 30
PROJECT REPORT 2011
Selection interview
Physical examination
Reference checks
Final approval of employment
TRAINING AND DEVELOPMENT
Employee training is distinct from management development.
Training is a short term process, utilizing a systematic and organized
procedure by which non managerial personnel learn technical knowledge
and skills for a definite purpose. On the other hand development is a long
term educational process utilizing a systematic and organized procedure by
which managerial personnel learn conceptual theoretical knowledge for
general purpose. On-the-job and off-the-job training methods are commonly
used.
PERFORMANCE APPRAISAL
Performance appraisal is measuring the relative worthiness of a
person who engaged in a job. Based on performance appraisal the best
workers should be rewarded.
PROMOTION
Promotion is on the basis of employee efficiency, performance,
commitment or loyalty the management will give job promotion to the
employees
Mar Augusthinose College, Ramapuram 31
PROJECT REPORT 2011
COMPENSATION
Employee compensation is a vital part of human resource
management. Wages, salaries and other form of employee compensation
constitute a very large component of operating cost. One of the biggest
factors affecting industrial relations is the salary or wage, the compensation
an employee receives a fair day’s work.
Employee compensation may be of two types:
1. Base compensation- Basic pay
2. Supplementary compensation- Incentives and variable payments.
INCENTIVES
There is a standard performance beyond which workers will get
special rewards. And this is termed as fringe benefits. Recreational facilities
are also provided.
BONUS
Bonus is given once in every year
ADVANCES
The company provides 3 types of advances:
1. FESTIVAL ADVANCES.
Employees are given festival advances during festival seasons.
2. SALARY ADVANCES
Employees are given one monthly salary in advance in case of
emergency. It will be returned in seven equal installments, which will be
deducted from salary.
Mar Augusthinose College, Ramapuram 32
PROJECT REPORT 2011
LEAVES
1. CASUAL LEAVE
One casual leave is given in a month by the company to its
employees.
2. SICK LEAVE
ESI benefit is provided to the employees of the company as per the
ESI Act. Those who are getting salary below Rs. 10000 can take leave
according to the seriousness of the sickness under the ESI Act. According
to this Act there is no specific time period for leave. Those who are getting
salary above Rs. 10000 can take 12 days of sick leave under ESI Act.
3. EARNED LEAVE
If an employee is working for 240 days continuously 14 days is
given as leave with wage, i.e. for every 20 days 1 leave is given.
FRINGE BENEFITS
Personal Accident Policy.
Insurance.
Provident Fund.
Gratuity.
Voluntary Retirement Service (VRS).
Medical facilities
Housing facilities etc.
Mar Augusthinose College, Ramapuram 33
PROJECT REPORT 2011
LABOUR WELFARE MEASURES
The workers of Hi-care polymers Pvt. Ltd enjoy the following
facilities;
1. Facilities for washing, storing, & drying their clothes at their
company premises.
2. Earned Leave
3. Rest rooms
4. Facilities for drinking water
5. Medical facility
6. Recreational facilities
7. Orientation programs of the newly selected employees
8. Social security schemes
9. Health and safety measures.
10. Canteens
11. Housing and travelling facilities etc.
Mar Augusthinose College, Ramapuram 34
PROJECT REPORT 2011
CHAPTER IV
LITERATURE FRAMEWORK
LABOUR WELFARE
The terms ‘labour welfare’, ‘labour welfare’ and ‘workers welfare’
are used interchangeable to denote various services provided by the
employers to the employees in addition to wages.
The importance of labour welfare was accepted as yearly as in 1931
when the royal commission on employee was started. Labour welfare aim at
providing the physical, psychological and general well being of the working
population. Labour welfare is carried by the Welfare Officer. The
improvement of labour welfare and increasing productivity with reasonable
level of social security is one of the prime objectives concerning social and
economic policy of the government. The resources have been directed
through the plan programs towards skill formation and development,
monitoring of working conditions, creation of industrial harmony through
infrastructure for health, industrial relations and insurance against diseases,
accident and unemployment for the workers and then families.
Labour welfare is a part and parcel of social welfare. The term social
welfare connotes the welfare of the society where as labour welfare is a
narrow concept concerned with the welfare of workers. Labour welfare
facilities include medical, education, cultural and other facilities.
In India, some welfare facilities are compulsory as per employee
laws, while others are purely voluntary in character. It should be noted that
the expenditure on labour welfare is a profitable investment in the long run
as it motivates the worker for higher productivity.
Mar Augusthinose College, Ramapuram 35
PROJECT REPORT 2011
DEFINITIONS:
1. “Any effort to make life worth living for workman”
-Oxford dictionary.
2. “Workers welfare should be understood as meaning with services,
facilities and amenities which may be established in or in the vicinity of the
undertakings to enable the persons employed in them to perform their work
in healthy, congenial and provided with amenities conductive to good
health and high morale,”
- The International Labour Organization.
3. “Anything done for the intellectual, physical, moral and economic
betterment of the workers whether by employer or by government or by
other agencies and above what is laid down by law of what is normally the
contractual benefits for which workers may have bargained”
- Employee Investigation Committee, 1944-46.
4. “The voluntary efforts of the employees to establish within the existing
industrial system working and sometimes living and cultural conditions of
the employees beyond what is required by the custom of the country and the
conditions of the market”
-The Encyclopedia of Social Science.
5. Labour welfare means “anything done for the employees over and above
the wages paid which is not a necessity of the industry”
- Arthur James Todd.
Mar Augusthinose College, Ramapuram 36
PROJECT REPORT 2011
CONCEPT OF LABOUR WELFARE
The concept of labour welfare is flexible, elastic and differs widely.
Labour welfare is a dynamic concept; a new welfare measure is added to the
existing ones along with social changes. It is also a comprehensive concept.
The modem concept of Labour welfare entails all those activities of the
employers, which are directed towards providing the employees with
certain facilities and services in addition to wages or organization salaries.
Labour welfare may be viewed as a total concept, as a social concept
and as a relative concept. The total concept is a desirable state of existence
involving the physical, mental, moral and emotional well being. These four
elements together constitute the structure of welfare, on which its totality is
based. Social concept of welfare implies the welfare of man, his family and
his community. The relative concept of welfare implies that welfare is
relative in time and place.
HISTORY OF LABOUR WELFARE
BEFORE INDEPENDENCE
The movement to improve the working conditions of Indian labour
started with the passing of the first Indian Factories Act in 1881. The
Factories Act, 1891 was passed as a result of the recommendations of the
Bombay Factory Commission of 1884 and the Factory Labour Commission
of 1890. It applied to all factories employing 50 persons or more. The lower
and upper age limits for children were raised to 9 and 14 respectively and
their hours of work were limited to 7 and between 5.00am and 8.00pm.
Employment of women between 7.00pm and 5.00 am was prohibited.
Women were allowed to work for 11 hours in a day with one and a half
hours rest. Provisions relating to better ventilation, cleanliness and for
preventing overcrowding in factories were also made.
Mar Augusthinose College, Ramapuram 37
PROJECT REPORT 2011
The outbreak of the First World War in 1914 led to a number of new
developments. The Russian Revolution had a tremendous impact on the
attitudes of government and society towards labour. During the war years
the number of factories and the number of persons employed therein
increased. The formation of AITUC (1920), the first central trade union
organization in our country also helped in furthering the cause of welfare
movement.
The Second World War brought about far-reaching consequences in
all fields of activities. The need for sustained and increased production gave
a fillip to Indian industry. The number of factories and factory employees
increased enormously, the government took initiative and actively promoted
various welfare activities among industrial employees. A number of
legislations for the welfare of the working classes were also enacted.
AFTER INDEPENDENCE
After Independence, the labour welfare movement acquired new
dimensions. Various labour welfare activities were incorporated in different
five year plans.
The First Five Year Plan (1951-56) paid considerable attention to the
welfare of the working classes. During the Second Five Year Plan (1956-
61) the importance of better working conditions had been progressively
recognized. The Third Five Year Plan (1961-66) stressed the need for more
effective implementation of various statutory welfare provisions.
The Fourth Five Year Plan (1969-74) provided for the expansion of
the Employees State Insurance Scheme to cover medical facilities to the
families of insured persons, and to cover shops and commercial
establishments in selected centers. The Fifth Five Year Plan (1974-79) also
laid down programs for promoting industrial safety. In the Sixth Five Year
Mar Augusthinose College, Ramapuram 38
PROJECT REPORT 2011
Plan (1980-85) special programs would also need to be undertaken by the
state governments for the benefit of agricultural labour, artisans, handloom
weavers, fisherman, leather workers and other unorganized workers in the
rural and urban areas.
In the Seventh Five Year Plan (1985-90) emphasis was given on
labour welfare, improvement in working and living conditions of
unorganized labour not only in rural areas, but also in urban areas. The
Eight Five Year Plan (1992-97) laid stress on strategic improvement in the
quality of labour, productivity, skills and working conditions and provisions
of welfare and social security measures, especially of those working in the
unorganized sector for quantitative and qualitative enhancement of
employment opportunities.
LABOUR WELFARE MEASURES HAVE THE FOLLOWING
OBJECTIVES:
To provide better life and health to the workers.
To make the workers happy, satisfied and efficient.
It helps to improve industrial relations and industrial peace.
It helps to increase employee productivity or efficiency by improving
their physical and mental health.
To improve the goodwill and public image of the enterprise.
To relieve workers from industrial fatigue and to improve
intellectual, cultural and material conditions of living of the workers.
It improves the morale and loyalty of workers.
It reduces labour turnover and absenteeism thereby building stable
workforce.
Mar Augusthinose College, Ramapuram 39
PROJECT REPORT 2011
THE BASIC OF WELFARE MEASURES ARE AS FOLLOWS:
Labour welfare includes various facilities, services and amenities
provided to workers for improving their health, efficiency, economic
betterment and social status.
Welfare measures are in addition to regular wages and other
economic benefits available to workers due to legal provisions and
collective bargaining.
Labour welfare schemes are flexible and ever-changing.
Labour welfare measures are also known as fringe benefits and
services.
It is an essential part of social welfare.
Welfare measures are both voluntary and statutory.
Labour welfare measures are flexible and ever changing. New
welfare measures are added to the existing ones from time to time.
Welfare measures may be introduced by the employees, government,
employers or by any social or charitable agency.
The purpose of labour welfare is to bring about the development of
the whole personality of the worker to make him a good worker and
a good citizen.
AIMS OF LABOUR WELFARE
To win over employees loyalty and increase their morale.
To combat trade unionism and socialist ideas.
To build up stable employee force to reduce employee turnovers and
absenteeism.
Mar Augusthinose College, Ramapuram 40
PROJECT REPORT 2011
To develop productivity and efficiency among workers.
To save oneself from heavy taxes on surplus profit.
To earn goodwill and enhance public image.
To reduce the threat of further government intervention.
It helps to improve recruitment of efficient employees.
It improves the morale and loyalty of workers by making them happy
and satisfied.
It reduces employee turnover and absenteeism there by building
stable work force.
PRINCIPLES OF LABOUR WELFARE
Management should be welfare oriented.
The workers have the right to adequate wages in addition to welfare
measures.
There should be periodical assessment or evaluation of welfare
measures and necessary timely improvements on the basis of
feedback.
The management should ensure co-operation and active participation
of unions and workers in formulating and implementing labour
welfare programs.
The labour welfare work of an organization must be administratively
viable and essentially development oriented.
There should be proper coordination, harmony and integration of all
labour welfare services in an undertaking.
Mar Augusthinose College, Ramapuram 41
PROJECT REPORT 2011
The employer should look after the welfare of his employees as a
matter of social obligation. The Constitution of India, in its Directive
Principles of State Policy also emphasizes this aspect of labour
welfare.
Labour welfare must aim at helping employees to help themselves in
the long run. This principle of self will enable them to become more
responsible and more efficient.
SIGNIFICANCE OF LABOUR WELFARE
The logic behind providing welfare facilities is to create efficient,
healthy, loyalty and satisfied employee force for the organization and also
for the nation. Employees are important stakeholders; employees who will
carryout fulfill their roles, with the aim of contributing to the enhancement
of the company’s enterprise value, there by winning society’s trust. In order
to have a solid organization, this attracts and inspirer’s employees like these
to actively contribute to the company with their best efforts, skills and
abilities. Labour welfare measures are endeavoring to establish effective
systems for performance evaluation.
Employee welfare is the interest of the employee, the employer and
the society as a whole. For the employee, welfare measures help to
counteract the negative effects of the factory system. These measures enable
the employee and his family to lead a good life. Welfare facilities like
housing, medical and children’s education etc help to improve the family
life of employees.
For employer, welfare measures lead to higher morale and
productivity of labour.
Employee welfare is also in the interest of the larger society because
the health, happiness and efficiency of each individual represent the general
Mar Augusthinose College, Ramapuram 42
PROJECT REPORT 2011
well-being of all. Well-housed, well-fed, and well-looked after, labour is
not only an asset to the employer but serves to raise the standards of
industry and labour in the country.
NEED FOR LABOUR WELFARE
The need for labour welfare arises from two basis factors; one, the
conditions under which works is earned on are not congenial for the health,
and second, when laborer joins in an industry he has to work in an entirely
strange atmosphere which creates problems of adjustments.
When worker, who is in fact a rusting has to work and live in
unhealthy congested factories and sum areas with no outdoor recreation
facilities to escape from the living of his tedious and tiresome job he
absents himself becomes irritated and often undisciplined. This is a social
reason. The provision of canteen improves the physique, environment,
reduces the evidence of vices, medical aid and maternity and child welfare
services improves the health of the employees and bringing down the rates
of general, maternal and child welfare services improve the health of the
workers and bingeing down the rates of general, maternal and infantile
morality and educational facilities increase their mental efficiency and
economic productivity.
Mar Augusthinose College, Ramapuram 43
PROJECT REPORT 2011
TYPES OF LABOUR WELFARE MEASURES
Labour welfare may be classified as follows:
Intramural:
These facilities are those which are provided within factory such as:
Medical facilities.
Compensation for accidents.
Provision for crèches and canteens.
Supply of drinking water.
Washing and bathing facilities.
Pension and gratuity.
Provision for provident fund.
Recruitment and discipline.
Fire extinguishers.
First aid appliances.
Extramural:
These facilities are those which are provided outside the occupation
such as:
Housing accommodation.
Transport facilities.
Educational facilities for children and adults.
Sports and amusements.
Mar Augusthinose College, Ramapuram 44
PROJECT REPORT 2011
Provisions for libraries and reading rooms.
Interest Free Loan.
Maternity benefits.
Voluntary welfare services
Housing.
Transport facilities.
Education.
Indoor and outdoor recreation facilities.
Consumer cooperative stores.
Statutory provisions
The Factories act, 1948.
The plantation labour act, 1951.
The mines act, 1952.
The motor transport workers act, 1961.
The contract labour regulation and abolition act, 1970.
BASIC FEATURES OF LABOUR WELFARE:
Mar Augusthinose College, Ramapuram 45
PROJECT REPORT 2011
The chief characteristics of labour welfare work may be noted as:-
It is the work which is usually undertaken within the premises for the
benefit of the employee and the members of his family.
The work generally includes those items of welfare which are one
and about what is provided by statutory provision.
The purpose of providing welfare amenities is to bring about the
development of the whole personality of the worker.
These facilities may be provided by progressive and enlightened
entrepreneurs of their town accord or government or trade union may
be under taken them, if they have the necessary funds for the
purpose.
Labour welfare is a very broad term covering social security and
such other activities as medical aid, crèches, canteens, recreations,
housing, adult education and arrangements for the transport of
employees to and from work place.
Labour welfare is a comprehensive term including various services,
facilities and amenities provided to employees for their betterment.
Labour welfare is an essential part of social welfare.
Labour welfare is a dynamic concept varying from country to
country and from region to region within same country.
Labour welfare measures are also known as fringe benefits and
services
AGENCIES OF EMPLOYEE’S WELFARE:
Mar Augusthinose College, Ramapuram 46
PROJECT REPORT 2011
Government.
State Government.
Employers.
Trade Unions.
Other Agencies.
WELFARE OFFICER
Labour welfare is the statutory code controlled by the Factories Act
for the benefit of the employees within the existing industrial system,
working and sometimes living and cultural conditions of the employees
beyond that which is required by law, keeping in par with the custom of the
industry and the controls of the maker.
“Labour welfare aims at providing the physical, psychological and
general well being of the working population. Labour welfare is carried by
the Welfare Officer. The Welfare Officer takes care of the physical and
general well being of the employees. To sum up welfare officer is expected
to act as an advisor, counselor, mediator and liaison officer between
management and employees.
THE FUNCTIONS OF THE WELFARE OFFICER ARE AS
FOLLOWS:
a. To maintain harmonious relations between the management and
workers by establishing contact and holding consultations.
b. To notice the grievance of the workers of employee at work place in
order to help the management to shape and formulate employee
policies and to interpret the policies to the workers in their language.
Mar Augusthinose College, Ramapuram 47
PROJECT REPORT 2011
c. To help the management to ask questions relating to the training of
new workers, apprentices, supervisors and control of notice board
and information bulletins to further the education of workers and to
encourage their attendance at technical institutes.
d. To advise on provision for welfare facilities such as housing
facilities, food stuff, recreational facilities etc.
e. To promote the relation between the concerned departments of the
company and to bring about efficient production of employees.
f. To advice the workers to adapt or adjust themselves to their working
environment.
g. To watch industrial relations in a view by using his influence in an
event of a dispute arising between management and employees and
help to bring down settlement by persuasive efforts.
h. To encourage provisions for amenities such as canteen shelters,
drinking water, benevolent schemes in payments, pension funds,
gratuity payments, granting loans and legal advice to the employees.
i. To assist arid help the management in achieving the objectives.
j. Suggest the workers to raise their living and to promote their well
being.
k. To study absenteeism and employee turnover and to take strict
measures to prevent them.
DUTIES OF AN LABOUR WELFARE OFFICER:-
Mar Augusthinose College, Ramapuram 48
PROJECT REPORT 2011
The committee of labour welfare (1969) has prescribed the following
duties of a labour welfare officer:
a. Supervision of (1) safety, health and welfare programs like housing,
sanitation, recreation etc; (2) working of joint committees; (3) grant
of leave with wages ;( 4) redressal of worker’s grievances.
b. Counseling workers in (1) personal and family problems; (2)
adjustment to their work environment; (3) understanding their rights
and privileges.
c. Establishing liaison with workers so that they may (1) understand the
limitations under which they work; (2) appreciates the need of
harmonious industrial relations in the plant; (3) interpret company
policies correctly; (4) come to a settlement in case of dispute.
d. Advising management on matters of (1) formulating employee and
welfare policies; (2) apprenticeship training programs; (3) meeting
statutory obligations to workers; (4) developing fringe benefits; (5)
workers education and use of communication media.
e. Establishing liaison with management so that they may appreciate
worker’s view point on various matters in the plant.
f. Working with management and workers to improve productivity.
g. Working with out side public to secure proper enforcement of
various laws.
RELEVANT WELFARE PROVISIONS UNDER FACTORIES ACT
Mar Augusthinose College, Ramapuram 49
PROJECT REPORT 2011
The Factories Act, 1948 provides for the need for adoption of
welfare measures as a means to increase the workers productive efficiency,
to keep up their morale etc. provisions relating to welfare of the factory
workers have been made in sections 42-50 of the Factories Act, 1948 which
are:
1. Washing Facilities (Sec.42)
In every factory, adequate separate and screened facilities shall be
provided for the use of male and female workers.
2. Facilities for Storing and Drying Clothes (Sec.43)
In every factory, facilities must be provided for storage of clothing
not worn during working hours and for the drying of wet clothing.
3. Facilities for Sitting (Sec.44)
In every factory, where workers are obliged to work in standing
positions, suitable sitting should be made so that such workers may take
advantage of an opportunity for rest which may occur in course of their
work.
4. First Aid Appliances (Sec.45)
The Act has made the provisions of first aid appliances obligatory.
Every factory must have first aid boxes with prescribed contents in every
factory. Where more than 500 workers are ordinarily employed there shall
be maintained an ambulance room.
5. Canteen (Sec.46)
In every factory, where more than 250 workers are employed, the
State Government is given the right to maintain a canteen for the use of
workers.
6. Shelters, Rest Rooms and Lunch Rooms (Sec.47)
Mar Augusthinose College, Ramapuram 50
PROJECT REPORT 2011
In every factory where there 150 workers are employed, adequate
and suitable shelter or rest rooms and suitable lunch rooms shall be
provided and maintained for the use of workers.
7. Crèches (Sec.48)
In every factory, where more than 30 women workers are ordinary
employed, there shall be provided and maintained a suitable room for the
use of children under the age of six years of such women.
8. Welfare Officers (Sec.49)
The main duty to look after the welfare of the workers lies on the
welfare of a factory. As such in every factory where in 500 or more workers
are ordinarily employed the occupier shall employ in the factory such
number of welfare officers as may be prescribed.
9. Power to Make Rules (Sec.50)
The State Government, to exempt any factory or class of factories
from compliances with any of the above mentioned welfare provisions
provided that it prescribes alternative arrangements for the welfare of the
workers.
Mar Augusthinose College, Ramapuram 51
PROJECT REPORT 2011
CHAPTER V
RESEARCH METHODOLOGY
TITLE OF THE STUDY
“A study on labour welfare measures on the employees of HI-CARE
POLYMERS PVT. LTD, PALAKUZHA, KOOTHATTUKULAM.”
RESEARCH
Research means search for knowledge. It is the search for knowledge
through objective and systematic method of finding solution to problems.
“Research comprises of defining and redefining problems,
formulating hypothesis, collecting, organizing and evaluating data, making
deductions and research conclusions and at last carefully testing
conclusions to determine whether they fit the formulating of hypothesis.”
– Clifford Woody
RESEARCH METHODOLOGY
Research methodology is a science. It is a systematic way to solve
research problems. It helps in studying how research is done scientifically.
UNIVERSE
Population or universe is the aggregate of all units possessing certain
specified characteristics on which the sample seeks to draw inferences.
Mar Augusthinose College, Ramapuram 52
PROJECT REPORT 2011
RESEARCH DESIGN
Research design is simply a specific presentation of the various steps
in the process of research. A research design is the arrangement of
conditions for collection and analysis of data in a manner that aims to
combine relevance to the research purpose with economy in procedure.
There are basically 3 types of research design:
1. Exploratory research design
2. Descriptive research design
3. Casual research design
The research design adapted to this study is Descriptive Research.
Descriptive Research studies are those studies which are concerned with
describing the characteristics of a particular individual or of a group. This
study focus on the method of putting the knowledge into practice in finding
a solution to the problem.
RESEARCH TOOLS
The main tools used in the study are:
1. Survey
It was conducted on the franchises at different areas for setting the
primary information.
2. Questionnaire
Questionnaire is used to collect primary data from employees.
3. Statistical Tools
Different statistical tools were used to analyze and interpret the data.
The main tools used in the analysis are percentage, diagrams and charts.
Mar Augusthinose College, Ramapuram 53
PROJECT REPORT 2011
SOURCES OF DATA
The researcher used Primary and Secondary sources of data for this
study.
PRIMARY DATA:
Primary data are those collected by the investigator/ researcher
himself for the first time. Interview and observation are the primary sources
of data collection. The data are collected by using a questionnaire served
among the employees.
SECONDARY DATA:
The data which are not originally collected but rather obtained from
the published or unpublished sources are known as secondary source of
data. Secondary data have been collected from books, news papers, internet,
print media and unpublished books, records, documents etc. maintained by
the company.
SAMPLE DESIGN
A sample design is the theoretical and the practical means by which
we infer the characteristics of some population by generalizing from the
characteristics of relatively few units of the units comprising the population.
UNIVERSE
Universe is the total population of the study. Here the universe is the
whole employees of HI-CARE POLYMERS PVT LTD. In this study, the
researcher use finite number of items.
Mar Augusthinose College, Ramapuram 54
PROJECT REPORT 2011
SAMPLING UNIT
The unit for sampling is selected. The sampling unit may contain one
or several population elements. The Hi-care Polymers Pvt. Ltd. is the
sampling unit.
SIZE OF THE SAMPLE
The number of elements of the population to be sampled is chosen is
called the size of the sample. The sample size used for collecting data is 50.
SAMPLING TECHNIQUE
A probability sample is also called a random sample. It is chosen in
such a way that each member of the universe has a known chance of being
selected.
Simple random sampling technique is used in the research. Under
simple random sampling each member of the population has a known and
equal chance of being selected.
Lottery method is a simple random method for selecting the sample
members. It is assigning each employee a number, placing all these
numbers in a container and then randomly drawing out numbers. A major
assumption of this process is that the numbers have to be thoroughly mixed
up within the container so that the sequence of numbers placed in the
container may not affect the probability of their being drawn. After a
number is drawn out, it is again placed back into the container so that the
probability of any number being selected remains known and equal. This
process is repeated and the required number of sample is selected.
Mar Augusthinose College, Ramapuram 55
PROJECT REPORT 2011
SAMPLING AREA
The sampling area was limited to Hi-care Polymers Pvt. Ltd,
Koothattukulam.
TOOLS FOR ANALYSIS
Analysis of data is the basic tool for data representation. After
collecting data, they must be properly evaluated. Here, the data analysis
tools used are simple percentage method, tables, pie charts and bar
diagrams.
SIMPLE PERCENTAGE
It is the simplest way of analyzing the inter-related characteristics
of the data. The data are converted into percentage charts are used for quick
and accurate comparison of data.
Calculation of simple percentage method:
No. of responses Total no. of responses
TABLES.
PIE CHARTS.
BAR DIAGRAMS.
DURATION OF THE STUDY
The duration of the study was for a period of two months.
Mar Augusthinose College, Ramapuram 56
X 100
PROJECT REPORT 2011
CHAPTER VI
DATA ANALYSIS AND INTERPRETATION
The data collected in this study have been tabulated, analyzed, and
interpreted using tables, percentages, graphs and diagrams. Data analysis
and interpretation deals with the personal information of the respondent and
the aspect related to welfare measures in HI-CARE PLOYMERS PVT
LTD.
Formula:
Number of respondents
Total number of respondents
The above formula is used to find out the percentage analysis.
Tables and figures are used to interpret the data.
Mar Augusthinose College, Ramapuram 57
X 100Percentage=
PROJECT REPORT 2011
1. WORK EXPERIENCE WITH THE ORGANIZATION
Table1:
Year Experience
Below 1 year 7
1-5 year 17
5-10 year 19
Above 10 years 7
Total 50
Chart 1:
Interpretation
Out of 50 samples, there are 7 employees working below one
year, found 17 employees are working between 1-5 years, 19 of them
between 5-10 years and remaining 7 employees having above 10 years
experience.
Mar Augusthinose College, Ramapuram 58
PROJECT REPORT 2011
2. WORK ENVIRONMENT.
Table2:
Category No. of Respondents Percentage
Highly Satisfied 25 50
Satisfied 15 30
Dissatisfied 10 20
Highly Dissatisfied 0 0
Total 50 100
Chart2:
Interpretation
The above diagram shows that 50% of the employees are
highly satisfied with the existing environment, 30% of the respondents
are satisfied with the present situation and 20% of the respondents are
dissatisfied.
Mar Augusthinose College, Ramapuram 59
PROJECT REPORT 2011
3. LABOUR WELFARE PROGRAMS
Table3:
Category No. of Respondents Percentage
Highly Satisfied 10 20
Satisfied 30 60
Dissatisfied 9 18
Highly Dissatisfied 1 2
Total 50 100
Chart3:
Interpretation
The above diagram shows that 20% of the employees are
highly satisfied with the labour welfare programs, 60% of the
respondents are satisfied, 18% of the respondents are dissatisfied and
2% of the respondents are highly dissatisfied.
Mar Augusthinose College, Ramapuram 60
PROJECT REPORT 2011
4. TRAINING AND EDUCATION PROGRAMS
Table 4:
Category No. Of Respondents Percentage
Highly Satisfied 18 36
Satisfied 22 44
Dissatisfied 7 14
Highly Dissatisfied 3 6
Total 50 100
Chart 4:
Interpretation
The above diagram shows that 36% of the employees are highly
satisfied with the training and education programs, 44% of the
respondents are satisfied, 14% of the respondents are dissatisfied and 6%
of the respondents are highly dissatisfied. .
Mar Augusthinose College, Ramapuram 61
PROJECT REPORT 2011
5. EMPLOYEES OPINION ABOUT SUPERVISION OF
WORK
Table 5:
Category No. Of Respondents Percentage
Highly Satisfied 20 40
Satisfied 15 30
Dissatisfied 10 20
Highly Dissatisfied 5 10
Total 50 100
Chart5:
Interpretation
The above diagram shows that 40% of the employees are highly
satisfied with the supervision of work, 30% of the respondents are
satisfied, 20% of the respondents are dissatisfied and 10% of the
respondents are highly dissatisfied.
Mar Augusthinose College, Ramapuram 62
PROJECT REPORT 2011
6. EMPLOYEES OPINION ABOUT THE TIMING FOR
SHIFT WORKING
Table6:
Chart6:
Interpretation
In this analysis 20% of the respondents have very good opinion,
40% of them have good opinion and 40% of them are satisfactory and no
one is there with the opinion dissatisfied.
Mar Augusthinose College, Ramapuram 63
Category No. of Respondents Percentage
Very Good 10 20
Good 20 40
Satisfactory 20 40
Not Satisfactory 0 0
Total 50 100
PROJECT REPORT 2011
7. EMPLOYEES OPINION ABOUT WAGE POLICY
Table7:
Category No. of Respondents Percentage
Highly Satisfied 17 34
Satisfied 24 48
Dissatisfied 8 16
Highly Dissatisfied 1 2
Total 50 100
Chart7:
Interpretation
The above diagram shows that 34% of the employees are
highly satisfied with the existing wage policy, 48% of the respondents
are satisfied, 16% of the respondents are dissatisfied and 2% of the
respondents are highly dissatisfied.
Mar Augusthinose College, Ramapuram 64
PROJECT REPORT 2011
8. LEAVES AND HOLIDAYS
Table8:
Category No. Of Respondents Percentage
Highly Satisfied 17 34
Satisfied 25 50
Dissatisfied 8 16
Highly Dissatisfied 0 0
Total 50 100
Chart8:
Interpretation
The above diagram shows that 34% of the employees are
highly satisfied with the existing leaves and holidays, 50% of the
respondents are satisfied and 16% of the respondents are dissatisfied.
Mar Augusthinose College, Ramapuram 65
PROJECT REPORT 2011
9. RETIREMENT BENEFITS
Table 9:
Category No. of respondents Percentage
Very Good 24 48
Good 14 28
Poor 8 16
Very Poor 4 8
Total 50 100
Chart9:
Interpretation
Out of 50 samples, 48% of the employees expressed very good
opinion towards retirement benefits, 28% of them with good opinion,
and 16 % of the employees are in satisfactory kevel and 8% of them
have very poor opinion.
Mar Augusthinose College, Ramapuram 66
PROJECT REPORT 2011
10. MONETARY BENEFITS
Table10:
Category No. of respondents Percentage
Very Good 10 20
Good 32 64
Poor 5 10
Very Poor 3 6
Total 50 100
Chart 10:
Interpretation
Out of 50 samples, 20% of the employees expressed very good
opinion towards monetary benefits. 64% of them with good opinion,
10% of the employees are in satisfactory kevel and 6% of them have
very poor opinion.
11.MEDICAL FACILITIES
Mar Augusthinose College, Ramapuram 67
PROJECT REPORT 2011
Table11:
Category No. of Respondents Percentage
Very Good 18 36
Good 28 56
Poor 4 8
Very Poor 0 0
Total 50 100
Chart11:
Interpretation
Out of 50 samples, 36% of the employees expressed very good
opinion towards medical facilities. 56% of them with good opinion
and 8% of the employees are in a satisfactory level.
Mar Augusthinose College, Ramapuram 68
PROJECT REPORT 2011
12.HEALTH AND SAFETY MEASURES
Table12:
Chart.12:
Interpretation
Out of 50 samples, 44% of the employees expressed very good
opinion towards health and safety measures. 36% of them with good
opinion and 20% of the employees are in a satisfactory level.
Mar Augusthinose College, Ramapuram 69
Category No. of Respondents Percentage
Very Good 22 44
Good 18 36
Poor 10 20
Very Poor 0 0
Total 50 100
PROJECT REPORT 2011
13. COMPENSATION PAID TO INJURED PERSON
Table13:
Chart.13:
Interpretation
Out of 50 samples, 54% of the employees expressed very good
opinion towards compensation paid to injure. 34% of them with good
opinion, 8% of the employees are in satisfactory level and 4% of them
have very poor opinion.
Mar Augusthinose College, Ramapuram 70
Category No. of Respondents Percentage
Very Good 27 54
Good 17 34
Poor 4 8
Very Poor 2 4
Total 50 100
PROJECT REPORT 2011
14. CANTEEN
Table.14:
Category No. of Respondents Percentage
Highly Satisfied 30 60
Satisfied 17 34
Dissatisfied 3 6
Highly Dissatisfied 0 0
Total 50 100
Chart.14:
Interpretation
The above diagram shows that 60% of the employees are
highly satisfied with the existing facilities of canteen, 34% of the
respondents are satisfied and 6% of the respondents are dissatisfied.
Mar Augusthinose College, Ramapuram 71
PROJECT REPORT 2011
15.LUNCH ROOM AND REST ROOM
Table.15:
Category No. Of Respondents Percentage
Highly Satisfied 28 56
Satisfied 18 36
Dissatisfied 4 8
Highly Dissatisfied 0 0
Total 50 100
Chart.15:
Interpretation
The above diagram shows that 56% of the employees are
highly satisfied with the lunch room and rest room, 36% of the
respondents are satisfied and 8% of the respondents are dissatisfied.
Mar Augusthinose College, Ramapuram 72
PROJECT REPORT 2011
16. LATRINES AND URINALS
Table.16:
Category No. Of Respondents Percentage
Highly Satisfied 29 58
Satisfied 18 36
Dissatisfied 3 6
Highly Dissatisfied 0 0
Total 50 100
Chart.16:
Interpretation
The above diagram shows that 58% of the employees are highly
satisfied with the latrines and urinals, 36% of the respondents are
satisfied and 6% of the respondents are dissatisfied.
Mar Augusthinose College, Ramapuram 73
PROJECT REPORT 2011
17. TRANSPORT SUBSIDY AND CONVEYANCE
Table.17:
Chart17:
Interpretation
Out of 50 samples, 36% of the employees expressed very good
opinion towards transport subsidy and conveyance. 32% of them with
good opinion, 20% of the employees are in satisfactory level, and 12%
of them have very poor opinion.
Mar Augusthinose College, Ramapuram 74
Category No. of Respondents Percentage
Very Good 18 36
Good 16 32
Poor 10 20
Very Poor 6 12
Total 50 100
PROJECT REPORT 2011
18. RECREATIONAL FACILITIES
Table18:
Category No. Of Respondents Percentage
Highly Satisfied 30 60
Satisfied 12 24
Dissatisfied 8 16
Highly Dissatisfied 0 0
Total 50 100
Chart.18:
Interpretation
The above diagram shows that 60% of the employees are
highly satisfied with the recreational facilities, 24% of the respondents
are satisfied and 16% of the respondents are dissatisfied.
19. LIGHTING AND VENTILATION
Mar Augusthinose College, Ramapuram 75
PROJECT REPORT 2011
Table.19:
Category No. of Respondents Percentage
Highly Satisfied 12 24
Satisfied 18 36
Dissatisfied 12 24
Highly Dissatisfied 8 16
Total 50 100
Chart.19:
Interpretation
The above diagram shows that 24% of the employees are
highly satisfied with the lighting and ventilation facilities, 36% of the
respondents are satisfied, 24% of the respondents are dissatisfied and
16% of the respondents are highly dissatisfied.
20. DRINKING WATER FACILITY
Mar Augusthinose College, Ramapuram 76
PROJECT REPORT 2011
Table.20:
Category No. Of Respondents Percentage
Highly Satisfied 20 40
Satisfied 25 50
Dissatisfied 5 10
Highly Dissatisfied 0 0
Total 50 100
Chart.20:
Interpretation
The above diagram shows that 50% of the employees are
highly satisfied with the existing environment, 30% of the respondents
are satisfied with the present situation and 20% of the respondents are
dissatisfied.
21. JOB SECURITY
Mar Augusthinose College, Ramapuram 77
PROJECT REPORT 2011
Table.21:
Chart.21:
Interpretation
Out of 50 samples, 36% of the employees expressed very good
opinion towards their job security, 32% of them with good opinion,
and 20% of the employees with poor opinion and 12% with opinion of
very poor.
Mar Augusthinose College, Ramapuram 78
Category No. of Respondents Percentage
Very Good 18 36
Good 16 32
Poor 10 20
Very Poor 6 12
Total 50 100
PROJECT REPORT 2011
22. OPINION ABOUT LABOUR WELFARE MEASURES
MOTIVATE EMPLOYEES
Table.22:
Chart.22:
Interpretation
Out of 50 samples, 20% of the employees are strongly agreed
with the opinion that welfare measures motivate employees. 60% of
them agreed, 12% of the employees disagree with the opinion and
8% of them are strongly disagreeing with the opinion.
Mar Augusthinose College, Ramapuram 79
Category No. Of Respondents Percentage
Strongly Agree 10 20
Agree 30 60
Disagree 6 12
Strongly Disagree 4 8
Total 50 100
PROJECT REPORT 2011
23. OPINION ABOUT LABOUR WELFARE MEASURES
INCREASE PRODUCTIVITY
Table 23:
Chart23:
Interpretation
Out of 50 samples, 20% of the employees are strongly agreed
with the opinion that welfare measures increase productivity of
employees. 50% of them agreed, 20% of the employees disagree with
the opinion and 10% of them are strongly disagreeing with the
opinion.
Mar Augusthinose College, Ramapuram 80
Category No. Of Respondents Percentage
Strongly Agree 10 20
Agree 25 50
Disagree 10 20
Strongly Disagree 5 10
Total 50 100
PROJECT REPORT 2011
24. EVALUATION OF WORK AND EFFORTS
Table.24:
Category No. Of Respondents Percentage
Highly Satisfied 10 20
Satisfied 19 38
Dissatisfied 13 26
Highly Dissatisfied 8 16
Total 50 100
Chart.24:
Interpretation
The above diagram shows that 20% of the employees are
highly satisfied with the evaluation of work and efforts, 38% of the
respondents are satisfied, 26% of the respondents are dissatisfied and
16% of the respondents are highly dissatisfied.
Mar Augusthinose College, Ramapuram 81
PROJECT REPORT 2011
25. EMPLOYEE – EMPLOYER RELATIONS
Table.25:
Category No. Of Respondents Percentage
Excellent 13 26
Very Good 26 52
Good 9 18
Poor 2 4
Total 50 100
Chart.25:
Interpretation
Out of 50 samples, 26% of the employees expressed very
excellent opinion towards acceptance of employee suggestions, 52%
of them with very good opinion, and 18% of the employees with good
opinion and 4% with opinion of poor.
Mar Augusthinose College, Ramapuram 82
PROJECT REPORT 2011
26. JOB POSITION
Table.26:
Chart.26:
Mar Augusthinose College, Ramapuram 83
Category No. of Respondents Percentage
Very Good 20 40
Good 17 34
Poor 10 20
Very Poor 3 6
Total 50 100
PROJECT REPORT 2011
Interpretation
Out
of 50
samples, 36% of the employees expressed very good opinion towards
their job security, 32% of them with good opinion, and 20% of the
employees with poor opinion and 12% with opinion of very poor.
27. CAREER OPPRTUNITES
Table.27:
Chart.27:
Mar Augusthinose College, Ramapuram 84
Category No. of Respondents Percentage
Very Good 15 30
Good 23 46
Poor 9 18
Very Poor 3 6
Total 50 100
PROJECT REPORT 2011
Interpretation
Out of 50 samples, 30% of the employees expressed very
good opinion towards career opportunities, 46% of them with good
opinion, and 18% of the employees with poor opinion and 6% with
opinion of very poor.
28. ACCEPTENCE OF EMPLOYEE SUGGESTIONS
Table.28:
Category No. Of Respondents Percentage
Excellent 10 20
Very Good 12 24
Good 18 36
Poor 10 20
Total 50 100
Chart.28:
Mar Augusthinose College, Ramapuram 85
PROJECT REPORT 2011
Interpretation
Out of 50 samples, 20% of the employees expressed very
excellent opinion towards acceptance of employee suggestions, 24%
of them with very good opinion, and 36% of the employees with good
opinion and 20% with opinion of poor.
29. OVERALL ATTITUDE OF MANAGE MENT TOWARDS
EMPLOYEE
Table29:
Category No. Of Respondents Percentage
Excellent 13 26
Very Good 25 50
Good 12 24
Poor 0 0
Total 50 100
Chart29:
Mar Augusthinose College, Ramapuram 86
PROJECT REPORT 2011
Interpretation
Out of 50 samples, 26% of the employees expressed very
excellent opinion towards acceptance of employee suggestions, 50%
of them with very good opinion, and 24% of the employees with good
opinion.
30. EFFECTIVENESS OF CURRENT WELFARE MEASURES
Table.30:
Category No. Of Respondents Percentage
Excellent 13 26
Very Good 24 48
Good 11 22
Poor 2 4
Total 50 100
Chart.30:
Mar Augusthinose College, Ramapuram 87
PROJECT REPORT 2011
Interpretation
Out of 50 samples, 26% of the employees expressed very
excellent opinion towards acceptance of employee suggestions, 48%
of them with very good opinion, and 22% of the employees with good
opinion and 4% with opinion of poor.
CHAPTER VII
F I N D I N G S
The main findings of this study are based on the anaysis of
data obtained from the respndents with the help of questionnaire method.
GENERAL DETAILS
40% of employees are between the age group of 20-30
75% of employees are male
60% of employees are married
45% of employees have passed SSLC
Mar Augusthinose College, Ramapuram 88
PROJECT REPORT 2011
GENERAL OBJECTIVE:
To study about effectiveness of labour welfare measures.
48% of the employees have very good opinion about the
effectiveness of current welfare measures.
SPECIFIC OBJECTIVES:
1) To identify the welfare facilities provided in the organization.
50% of the employees are satisfied with the leave and holiday
provided by the company.
48% of the employee’s have very good opinion about retirement
benefits.
64% of the employees have good opinion about the monetary
benefits.
56% of the employees have good opinion about the medical
facilities.
44% of the employees have very good opinion about the health and
safety measures.
54% of the employees have very good opinion about the
compensation paid to injured person.
60% of the employees are highly satisfied with the canteen facility.
56% of the employees are highly satisfied with lunch room and rest
room facility.
56% of the employees are highly satisfied with latrines and urinals
facility.
Mar Augusthinose College, Ramapuram 89
PROJECT REPORT 2011
The employees are making use of recreational facility and 60% of
employees are highly satisfied.
50% of the employees are satisfied with drinking water facility.
2) To find out the employees level of satisfaction through the welfare
measures.
48% of the employees are satisfied with the current wage policy.
60% of the employees agree that labour welfare measures motivate
employees.
50% of the employees agree that labour welfare measures increase
productivity.
52% of the employees have very good opinion about the employee-
employer relationship.
40% of the employees are satisfied with the current job position.
3) To put forward the matters to be rectified and further welfare
measures to be adopted.
Only 36% of the employees have very good opinion about job
security.
36% of the employees have very good opinion about the transport
and conveyance facility.
36% of the employees are satisfied with the lighting and ventilation
facility.
40% of the employee’s good opinion about the supervision.
44% of the employees are satisfied with the training and education
programs.
Mar Augusthinose College, Ramapuram 90
PROJECT REPORT 2011
OTHER FINDINGS
Most of the employees have a very good work experience with the
company.
50% of the employees are satisfied with the work environment.
60% of the employees are satisfied with the labour welfare programs
of the company.
40% of the employees have good opinion about the timing for shift
work.
38% of the workers are satisfied with the evaluation of work and
efforts.
46% of the employees have good opinion about the career
opportunities available to them.
36% of the employees have good opinion about the acceptance of
their suggestions.
50% of the employees have very good opinion about the overall
attitude of management towards employees.
Mar Augusthinose College, Ramapuram 91
PROJECT REPORT 2011
CHAPTER VIII
SUGGESTIONS
The improved relationship between the employees and Labour
Welfare Officers must be ensured which will increase the efficiency
and commitment of employees.
A systematic and scientific approach is necessary to improve the
welfare of the employees.
Majority of the respondents suggest to increasing the number of
leave days.
Periodical training to be provided in order to increase the efficiency
of the employees.
The improvement of housing and transportation facilities is very
helpful to the welfare of the employees.
Increase entertainment programs for the refreshment of employees
like family get together.
The company can provide some educational facilities for the
employee’s children.
All the above facilities provided by the company are good and it is
suggested that they keep it up so that the job satisfaction of the employees
increase and that they feel one with the company.
Mar Augusthinose College, Ramapuram 92
PROJECT REPORT 2011
CHAPTER IX
CONCLUSIONS
The term “labour welfare” is a comprehensive term including various
services facilities and amenities provided to the worker to increase their
performance. In order to get the best out of a worker in a company, they
should provide the best welfare facilities than their competitors.
The main findings of the study based on the analysis of data obtained
from the respondents with the help of interview schedule and research
observation. This has been done systematically and major findings of the
study are represented with few recommendations. From this study, it is
clear that the employees are satisfied with labour welfare facilities provided
by the company.
These kinds of researches help the companies like HI-CARE
POLYMERS Pvt. Ltd to get a feed back on the degree of quality of
provided welfare facilities and to take necessary steps to increase their
performance these by achieving the organizational goals more effectively.
Mar Augusthinose College, Ramapuram 93
PROJECT REPORT 2011
QUESTIONNAIRE
Labour welfare Measures for the Employees of
HI-CARE POLYMERS PVT. LTD, PALAKUZHA.
I humbly request your participation in this survey. The
information provided by you will be strictly used for academic
purpose only.
PERSONAL DATA:
Name :
Age :
Sex :
Educational qualification :
OPINIONS:
1. How long have you been working with HI-CARE POLYMERS
PVT LTD?
Below 1 year 5-10 year 1 -5 year Above 10 year
2. Are you satisfied with the working environment?
Highly satisfied Satisfied Dissatisfied Highly Dissatisfied
3. Are you satisfied with the labour welfare programs of the
company?
Highly satisfied Satisfied Dissatisfied Highly Dissatisfied
4. How do you rate the training and education program?
Highly satisfied Satisfied Dissatisfied Highly Dissatisfied
Mar Augusthinose College, Ramapuram 94
PROJECT REPORT 2011
5. Are you satisfied with the method of supervision of work?
Highly satisfied Satisfied Dissatisfied Highly Dissatisfied
6. What do you think about the timing of shift work?
Highly satisfied Satisfied Dissatisfied Highly Dissatisfied
7. Are you satisfied with the wage policy of the company?
Very Good Good Satisfactory Not Satisfactory
8. Are you satisfied with the leave and holidays provisions?
Highly satisfied Satisfied Dissatisfied Highly Dissatisfied
9. Are you satisfied with the retirement benefits like provident fund,
gratuity schemes etc?
Highly satisfied Satisfied Dissatisfied Highly Dissatisfied
10. Are you satisfied with the welfare measures like incentives, bonus
and other monetary benefits?
Very Good Good Poor Very Poor
11. How do you rate the medical facilities provided by the company?
Very Good Good Poor Very Poor
12. What is your opinion about health and safety measures in the
company?
Very Good Good Poor Very Poor
13. Do you agreed with the compensation paid to the injured persons?
Very Good Good Poor Very Poor
Mar Augusthinose College, Ramapuram 95
PROJECT REPORT 2011
14. Are you satisfied with the functioning of canteen?
Very Good Good Poor Very Poor
15. Are you satisfied with the lunch room and rest room facility?
Highly satisfied Satisfied Dissatisfied Highly Dissatisfied
16. Are you satisfied with the latrines and urinals?
Highly satisfied Satisfied Dissatisfied Highly Dissatisfied
17. Did the company provide you sufficient transport subsidy and
conveyance?
Highly satisfied Satisfied Dissatisfied Highly Dissatisfied
18. Are you satisfied with the recreational facilities?
Very Good Good Poor Very Poor
19. Are you satisfied with the lighting and ventilation facilities?
Highly satisfied Satisfied Dissatisfied Highly Dissatisfied
20. Are you satisfied with the drinking water facilities?
Highly satisfied Satisfied Dissatisfied Highly Dissatisfied
21. Does your job provide high level of job security?
Highly satisfied Satisfied Dissatisfied Highly Dissatisfied
22. Do you think that labour welfare programs motivate employees?
Very Good Good Poor Very Poor
Mar Augusthinose College, Ramapuram 96
PROJECT REPORT 2011
23. Do you think that labour welfare measures can increase your
productivity?
Strongly Agree Agree Disagree Strongly Disagree
24. Are you satisfied with the evaluation of work and efforts?
Strongly Agree Agree Disagree Strongly Disagree
25. How do you rate the employee- employer relationship?
Highly satisfied Satisfied Dissatisfied Highly Dissatisfied
26. Are you satisfied with your job position?
Excellent Very Good Good Poor
27. Does your job provide any career opportunities?
Excellent Very Good Good Poor
28. How do you rate the promptness of management in implementing
employee’s suggestions in welfare facilities?
Very Good Good Poor Very Poor
29. Are you satisfied with the overall attitude of management towards
employee’s satisfaction?
Excellent Very Good Good Poor
30. How do you rate the effectiveness of current welfare measures in
HI-CARE POLYMERS?
Excellent Very Good Good Poor
Mar Augusthinose College, Ramapuram 97
PROJECT REPORT 2011
31. Please give your suggestions to improve your labour welfare
measures:-
……………………………………………………………………
……………………………………………………………………
……………………………………………………………………
……………………………………………………………………
………………………………………………………
……………………………………………………………………
………………………………………………………………
Thanks for your co-operation.
Mar Augusthinose College, Ramapuram 98
PROJECT REPORT 2011
ORGANISATIONAL CHART
Mar Augusthinose College, Ramapuram 99
BOARD OF DIRECTORS
MANAGING DIRECTOR
FINANCE & ADMINISTRATION
MANAGER
FACTORY / PRODUCTION
MANAGER
OFFICE ASSISTANTS
CLERK
ACCOUNTS OFFICER
CHEMIST
RESEARCH & DEVELOPMENT
MANAGER
LAB ASSISTANTSSUPERVISORS
FOREMANS
GENERAL MANAGER
HR MANAGER
HR EXECUTIVES
OFFICE ASSISTANTS
MARKETINGMANAGER
WORKERS
SALES MANAGER
PROJECT REPORT 2011
Mar Augusthinose College, Ramapuram 100
MARKETING EXECUTIVES
PROJECT REPORT 2011
BIBLIOGRAPHYBOOKS
1. Chabra T. N, Human Resource Management Concepts and Issues,
Dhanpat Rai & Company, New Delhi, 2008.
2. Gupta C. B, Human Resource Management, Sultan Chand and
Son’s, New Delhi, 2009.
3. Kapoor N. D, Industrial Relations, Sultan Chand& Sons
Publications, New Delhi, 2009.
4. Kothari C. R, Research Methodology, New Age International
Publishers, Rajasthan, 2008.
5. Prasad I. M, Human Resources Management, New Jyothi
Publications, 2007.
6. Tripathi P.C, Personnel Management and Industrial relations,
Sultan Chand and Son’s, New Delhi, 2002.
WEBSITE:
www.glovesmanufacturingindustries.com
COMPANY RECORDS & FILES
Mar Augusthinose College, Ramapuram 101