electromotor catalogue

Overview of our motors

MA series M series MYG series

MD series YVP series YEJ2 series

BM series MONO PHASE series MY MC ML

MA SERIES A4 -A 8

Aluminum triphase squirrel cage induction motors in accordance with IEC/DIN

Frame size 56-132, output 0.06-18.5Kw, IP55, Insulation grade F.

Cast-iron triphase phase squirrel cage induction motors in accordance with IEC/DIN

Frame size 63-355, output 0.18-315Kw, IP55, Insulation grade F.

Cast-iron triphase multi-speed motor

DC brake motor

MY --- capacitor running

MC --- capacitor starting

ML --- dual capacitor, starting and running

Moveable Feet

TABLE OF CONTENTS

GENERAL INFORMATION A1 - A3

MONO PHASE SERIES A26 - A28

BM SERIES AC brake motor A23 - A25

4 Kinds frame size from 71 to 100, Specialized brake disc, no asbestos, with high friction coefficient and long life time

( abrasion wasting <0.15mm by 1300,000 times on-off) AC current brake, quickly response time Low noise & Vibration

YEJ2 SERIES A22

MD SERIES A20 - A21

M SERIES A9 - A19

The Products

The core of our delivery program consists of:

MA series Aluminum triphase squirrel cage induction motors in accordance with IEC/DIN Frame size 56-132, output 0.06-18.5Kw,

IP55, Insulation grade F.

M series Cast-iron triphase squirrel cage induction motors in accordance with IEC/DIN

Frame size 63-355, output 0.18-315Kw, IP55, Insulation grade F.

MD series Cast-iron triphase multi-speed motor

YEJ2 series DC brake motor

BM series AC brake motor£¨H

MY series Monophase electric motors, aluminum body, Tstar t/Tn=0.35-0.55,capacitor permanent

Frame size 56-90, output 0.06-2.2Kw, IP55, Insulation grade F

MC series Monophase electric motors, aluminum body, High starting torque, Tstar t/Tn=2.2~3, capacitor start, Frame size 71-112,

output 0.12-3Kw, IP55, Insulation grade F

ML series Monophase electric motors, aluminum body, High starting & running torque, Tstar t/Tn=2.0~2.2,

capacitor start / capacitor run, Frame size 71-112, output 0.25-3.7Kw, IP55, Iso F

Site Conditions

Useful used in most environments and will operate satisfactorily at temperatures from-20 oC to +40

oC and at altitudes up to 1000 metres

above sea level. For special environmental conditions,please consult our technical department.

Voltage and Frequency

230/400V ¡÷/ Y 50Hz (PN)/275/480V ¡÷/ Y 60Hz(PN *1.2)

400/690V ¡÷/ Y 50Hz (PN)/480/830V ¡÷/ Y 60Hz(PN *1.2)

Our motors are suitable for a voltage range of+/-5% from the normal value, voltages beyond these limits will cause a high winding

temperature rise.

Other voltages and/or frequencies are available on request.

Terminal box

The terminal box is sealed to IP55 and located on top as standard , By special order the terminal box may be located on the RH or LH

side.

Shaft

The centre bore in the shaft is in accordance with the standard DIN 332 sheet 1-2, form DS.

Balancing

The rotors are dynamically balanced with 1/2 key in the shaft.

Shaft roughness

The shaft is machined and suitable for mounting of V-seal or oil seal, with a roughness of 0.8 or less.

Key and keyway

According to DIN 6885, P1, form A.

- A1 -

GENERAL INFORMATION

Type of installation:

Positioning of the motor at the place of work, in relation to the line of axis (horizontal or ver tical) and the fixing devices.

The table shows the most widespread methods of installation in relation the the construction shape.

In conformity with IEC34-7, codes l and ll are given, relative to the two systems of classification used.

The motor identification plate gives the construction shape (IMB3, IMB5, IMB14, IMB34, IMB35, IMB10, IMB9) independently of the

type of installation.

Type of construction

with fixing feet

IMB3

Code I

Code II


with flange with through

holes on drive side

FF IMB5

Code I

Code II


with fixing feet and

flange with through holes

type FF on drive side

IMB35

Code I

Code II


with fixing feet and flange

with threaded holes type

FT on drive side

IMB34

Code I

Code II


without shield support

or flange on drive side

IMB9

Code I

Code II


with special flange

on drive side

IMB10

Code I

Code II


with flange with threaded

holes on drive side

FT IMB14

Code I

Code II

IM B3 IM V5 IM V6 IM B6 IM B7 IM B8

IM 1001 IM 1011 IM 1031 IM 1051 IM 1061 IM 1071

IM B5 IM V1 IM V3

IM 3001 IM 3011 IM 3031

IM B14 IM V18 IM V19

IM 3601 IM 3611 IM 3631


IM 2001 IM 2011 IM 2031


IM 2101 IM 2111 IM 2131

IM B9 IM V8 IM V9

IM 9101 IM 9111 IM 9131


IM 4001 IM 4011 IM 4031

GENERAL INFORMATION

- A2 -

We reserve the right to make changes to the performance data and dimensions in this catalogue without notice, This

information is for reference only.

Furthermore we reserve the prohibition to reproduce or publish pages or whole parts of this catalogue without

authorization

Frame Size Poles Drive End Non - Drive End

56 2-4 6201 ZZ C3 6201 ZZ C3

63 2-4 6201 ZZ C3 6201 ZZ C3

71 2-6 6202 ZZ C3 6202 ZZ C3

80 2-8 6204 ZZ C3 6204 ZZ C3

90 2-8 6205 ZZ C3 6205 ZZ C3

100 2-8 6206 ZZ C3 6206 ZZ C3

112 2-8 6306 ZZ C3 6306 ZZ C3

132 2-8 6308 ZZ C3 6308 ZZ C3

160 2-8 6309 ZZ C3 6309 ZZ C3

180 2-8 6311 C3 6311 C3

200 2-8 6312 C3 6312 C3

225 2-8 6313 C3 6313 C3

250 2-8 6314 C3 6314 C3

2802 6314 C3 6314 C3

4-8 6317 C3 6317 C3

3152 6317 C3 6317 C3

4-10 NU 319 C3 6319 C3

3552 6319 C3 6319 C3

4-10 NU 322 C3 NU 322 C3

Size and type of bearings are given as bellows:

Bearings

Our motors are equipped as standard with quality bearings from C&U,NSK,NTN,SKF

All bearings are protected from the external environment with oil seals on the drive and non drive end.

Grease nipple for frame size 180 and up.

Overload capacities

In compliance with IEC34 part 1,all motors can be exposed to the following overload conditions:

1.5 times the rated current for 2 min.

1.6 times the rated torque for 15 sec.

Both conditions apply to the rated voltage and rated frequency.

Guarantee

Our guarantee expires after 12 months from date of installation or 18 months after date of shipment, whatever comes first.

It only covers the replacement or repair free of charge of the defective units or parts provided that we admit that said faults

or defects are to be ascribed to manufacturing processes. The customer does not have to feel entitled to cancel or reduce

the outstanding orders because of defective material previously supplied. We will not be responsible for the payment of any

charges related to goods to be replaced or repaired under guarantee. Returns of material will only be accepted if both back

and forth transport charges will be covered by the customer. Our guarantee becomes completely null and void if units result

altered or repaired. For alternation it is included also the application of the motor out of the ambit and circle of our Society.

Our guarantee not cover defects of faults which would be attributed to external factors, insufficient maintenance, overload,

inadequate lubrication, unproper selection, mounting errors or shipping damages being shipment risks and expenses on

behalf of the customer.

GENERAL INFORMATION

- A3 -

GENERAL INTRODUCTIONMA series three-phase aluminum housing industry motors are made with casting aluminum alloy for the housing, end shields and

terminal box. The direction of wiring out of terminal box can be rotated at multi direction, the motor feet can be removed and suitable differentinstallation ways and apply fields. MA series motors are in conformity with IEC/DIN standards and meet or exceed the efficiency EFF2required by EU/CEMEP. fitable for the common sites and concise machineries that have no special requirements including reducers,comperessors, pumps, assembling line, packing machines, foodstuff processing machineries, etc. The features and operating conditionsare as followings:¡ñ Moveable feet¡ñ High accuracy, light weight and beautiful appearance¡ñ Totally enclosed fan cooled (IC411 in accordance with IEC60034-6)¡ñ Rated voltage: 380V, 400V, 415V¡ñ Rated Frequency: 50HZ, 60HZ¡ñ Protection: IP55

MA MOTOREFF 2

¡ñ Insulation Class: F, with temperature rise class B¡ñ Duty: Continuous (S1)¡ñ Connection: Star-connection for 3kw or less and delta-connection for 4kw or more¡ñ Ambient temperature: -20

oC¡Ü0¡Ü40

oC

¡ñ The altitude does not exceed 1000 meters above sea level

EXPLODED VIEW FOR SPARE PARTS

NEW

1. B5 Flange2. Gasket3. B14 Flange4. Frame5. Key

6. Oil seal (V ring)7. Bolt8. Spring Washer9. Front Endshield10. Wave washer

11. Bearing12. Stator13. Feet14. Nameplate15. Rotor

16. Circlip17. Rear Endshield18. Fan19. Fan cowl20. Screw

21. Washer22. Fan clamp23. Terminal box lid24. Terminal box base25. Washer

26. Cable gland27. Terminal board

- A4 -

OUTPUT SPEED IFL IFL IFL EFFICIENCY POWER FACTOR Weight

TYPE 380V 400V 415V

Kw Hp r/min (AMPS) (AMPS) (AMPS) % COS ¦µ (kg)

MA 56 K 2 0.09 0.12 2800 0.323 0.31 0.30 62.0 0.68 6.0 2.2 2.3 3.4

MA 56 G 2 0.12 0.18 2800 0.382 0.36 0.35 67.0 0.71 6.0 2.2 2.3 3.8

MA 63 K 2 0.18 0.25 2800 0.53 0.50 0.49 69.0 0.75 6.0 2.2 2.3 5.2

MA 63 G 2 0.25 0.37 2800 0.67 0.64 0.61 72.0 0.78 6.0 2.2 2.3 5.8

MA 71 K 2 0.37 0.50 2800 0.95 0.9 0.87 73.5 0.80 6.0 2.2 2.3 7.8

MA 71 G 2 0.55 0.75 2800 1.35 1.28 1.24 75.0 0.82 6.0 2.2 2.3 6.5

MA 80 K 2 0.75 1 2840 1.78 1.69 1.63 75.0 0.83 6.0 2.2 2.3 11.5

MA 80 G 2 1.1 1.5 2840 2.49 2.37 2.28 77.0 0.84 7.0 2.2 2.3 12

MA 90 S 2 1.5 2 2840 3.34 3.17 3.06 79.0 0.84 7.0 2.2 2.3 13.5

MA 90 L 2 2.2 3 2840 4.69 4.46 4.29 81.0 0.85 7.0 2.2 2.3 15

MA 100 L 2 3 4 2880 6.14 5.83 5.62 83.0 0.87 7.5 2.2 2.3 25

MA 112 M 2 4 5.5 2890 7.83 7.44 7.17 85.0 0.88 7.5 2.2 2.3 28

MA 132 S 2 5.5 7.5 2900 10.7 10.17 9.80 86.0 0.88 7.5 2.2 2.3 39

MA 132 SX 2 7.5 10 2900 14.2 13.49 13.00 87.0 0.88 7.5 2.2 2.3 41

MA 160 M 2 11 15 2930 20.9 19.9 19.2 88.7 0.90 7.5 2.2 2.3 69

MA 160 MX 2 15 20 2930 28.3 26.9 25.9 89.5 0.90 7.5 2.2 2.3 78

MA 160 L 2 18.5 25 2930 34.1 32.4 31.2 90.5 0.91 7.5 2.2 2.3 90

PERFORMANCE DATA 2 POLE. 3000 RPM SYNCHRONOUS SPEED 50Hz


OUTPUT SPEED IFL IFL IFL EFFICIENCY POWER FACTOR Weight TYPE 380V 400V 415V


MA 56 K 4 0.06 0.09 1400 0.28 0.27 0.26 56.0 0.58 6.0 2.2 2.3 3.3

MA 56 G 4 0.09 0.12 1400 0.385 0.37 0.35 58.0 0.61 6.0 2.2 2.3 3.5

MA 63 K 4 0.12 0.18 1400 0.48 0.46 0.44 60.0 0.63 6.0 2.2 2.3 4.2

MA 63 G 4 0.18 0.25 1400 0.65 0.62 0.60 64.0 0.66 6.0 2.2 2.3 4.5

MA 71 K 4 0.25 0.37 1400 0.83 0.79 0.76 67.3 0.68 6.0 2.2 2.3 6

MA 71 G 4 0.37 0.50 1400 1.12 1.06 1.03 70 0.72 6.0 2.2 2.3 6.3

MA 80 K 4 0.55 0.75 1400 1.54 1.46 1.41 71.8 0.75 5.2 2.4 2.3 8

MA 80 G 4 0.75 1 1400 1.99 1.89 1.82 73.5 0.76 6.0 2.3 2.3 9.2

MA 90 S 4 1.1 1.5 1400 2.8 2.66 2.56 76.5 0.77 6.0 2.3 2.3 11

MA 90 L 4 1.5 2 1400 3.65 3.47 3.34 78.6 0.79 6.0 2.3 2.3 14

MA 100 L 4 2.2 3 1420 5.05 4.80 4.62 82 0.81 7.0 2.3 2.3 19.2

MA 100 LX 4 3 4 1420 6.64 6.31 6.08 83 0.82 7.0 2.3 2.3 22.5

MA 112 M 4 4 5.5 1440 8.62 8.19 7.89 85 0.82 7.0 2.3 2.3 28.5

MA 132 S 4 5.5 7.5 1440 11.5 10.93 10.53 86.6 0.83 7.0 2.3 2.3 40

MA 132 M 4 7.5 10 1440 15.3 14.54 14.01 87.6 0.84 7.0 2.3 2.3 47

MA 160 M 4 11 15 1460 22.2 21.1 20.3 88.5 0.85 7.0 2.3 2.3 78

MA 160 L 4 15 20 1460 29.8 28.3 27.3 89.9 0.85 7.0 2.3 2.3 90

MA MOTOR EFF 2

IST

IN

TST

TN

TMAX

TN

IST

IN

TST

TN

TMAX

TN

- A5 -


TYPE 380V 400V 415V


MA 71 K 6 0.18 0.25 900 0.79 0.75 0.72 57.0 0.66 4.0 1.9 2.0 6

MA 71 G 6 0.25 0.37 900 0.97 0.92 0.89 60.0 0.68 4.0 1.9 2.0 6.3

MA 80 K 6 0.37 0.50 900 1.27 1.21 1.16 63.0 0.70 4.7 1.9 2.0 8.5

MA 80 G 6 0.55 0.75 900 1.74 1.65 1.59 66.0 0.72 4.7 1.9 2.1 9.6

MA 90 S 6 0.75 1 910 2.23 2.12 2.04 70.0 0.72 5.5 2.0 2.1 13

MA 90 L 6 1.1 1.5 910 3.1 2.95 2.84 73.3 0.73 5.5 2.0 2.1 14

MA 100 L 6 1.5 2 940 3.89 3.7 3.56 77.5 0.75 5.5 2.0 2.1 18

MA 112 M 6 2.2 3 940 5.46 5.19 5.0 80.0 0.76 6.5 2.0 2.1 24.5

MA 132 S 6 3 4 960 7.1 6.75 6.50 82.0 0.76 6.5 2.1 2.1 39

MA 132 M 6 4 5.5 960 9.3 8.84 8.52 83.0 0.76 6.5 2.1 2.1 41.5

MA 132 MX 6 5.5 7.5 960 12.5 11.9 11.5 85.4 0.78 6.5 2.1 2.1 55

MA 160 M 6 7.5 10 970 16.8 16.0 15.4 87.0 0.78 6.5 2.1 2.1 78

MA 160 L 6 11 15 970 23.7 22.5 21.7 88.3 0.80 6.5 2.1 2.1 90



TYPE 380V 400V 415VKw Hp r/min (AMPS) (AMPS) (AMPS) % COS ¦µ (kg)

MA 80 K 8 0.18 0.25 690 0.86 0.82 0.79 52.0 0.61 3.3 1.8 1.9 10

MA 80 G 8 0.25 0.37 690 1.14 1.08 1.04 54.6 0.61 3.3 1.8 1.9 11

MA 90 S 8 0.37 0.50 690 1.47 1.4 1.35 62.8 0.61 4.0 1.8 1.9 13

MA 90 L 8 0.55 0.75 690 2.1 2.0 1.92 63.5 0.61 4.0 1.8 2.0 14

MA 100 L 8 0.75 1 700 2.34 2.22 2.14 72.1 0.67 4.0 1.8 2.0 23

MA 100 LX 8 1.1 1.5 700 3.22 3.06 2.95 74.0 0.69 5.0 1.8 2.0 25

MA 112 M 8 1.5 2 700 4.41 4.19 4.04 76.0 0.69 5.0 1.8 2.0 28

MA 132 S 8 2.2 3 710 6.0 5.7 5.49 79.2 0.71 6.0 1.8 2.0 45

MA 132 M 8 3 4 710 7.6 7.22 6.96 80.0 0.73 6.0 1.8 2.0 55

MA 160 M 8 4 5.5 720 10.0 9.5 9.2 82.0 0.74 6.0 1.9 2.0 69

MA 160 MX 8 5.5 7.5 720 13.3 12.6 12.1 84.0 0.75 6.0 2.0 2.0 78

MA 160 L 8 7.5 10 720 17.6 16.8 16.2 86.1 0.75 6.0 2.0 2.0 90


MA MOTOREFF 2

IST

IN

TST

TN

TMAX

TN

IST

IN

TST

TN

TMAX

TN

- A6 -

¡À

Frame A AB AC AD B C D DH E F G H K KK L M N P S T

MA56 90 115 110 100 71 36 9+0.008

M4x12 20 3 7.2 56 5.8 1-M20x1.5 170 100 80 120 ¨ 7 3

MA63 100 135 130 115 80 40 11 -0.003 M4x12 23 0.26 4 8.5 63 7 1-M20x1.5 225 115 95 140 ¨ 10 3

MA71 112 150 145 120 90 45 14 M5x12 30 5 11 71 7 1-M20x1.5 250 130 110 160 ¨ 10 3.5

MA80 125 165 175 145 100 50

1.5

19 M6x16 40 6 15.5 80 10 1-M25x1.5 295 165 130 200 ¨ 12 3.5

MA90S 140 180 195 155 100 56 24+0.009

M8x19 50 0.31 8 20 90 10 1-M25x1.5 315 165 130 200 ¨ 12 3.5

MA90L 140 180 195 155 125 56 24 M8x19 50 8 20 90 10 1-M25x1.5 340 165 130 200 ¨ 12 3.5

MA100L 160 205 215 180 140 63 28

-0.004

M10x22 60 8 24 100 12 1-M32x1.5 385 215 180 250 ¨ 15 4

MA112M 190 230 240 190 140 70 28 M10x22 60 8 24 112 12 2-M32x1.5 400 215 180 250 ¨ 15 4

MA132S 216 270 275 210 140 89

2.0

38 M12x28 800.37

10 33 132 12 2-M32x1.5 470 265 230 300 ¨ 15 4

MA132M 216 270 275 210 178 89 38 +0.018 M12x28 80 10 33 132 12 2-M32x1.5 510 265 230 300 ¨ 15 4

MA160M 254 320 330 255 210 108 3.0

42 +0.002 M16x36 1100.43

12 37 160 15 2-M40x1.5 615 300 250 350 ¨ 19 5

MA160L 254 320 330 255 254 108 42 M16x36 110 12 37 160 15 2-M40x1.5 670 300 250 350 ¨ 19 5

MA56-160 IMB5/B35

MA56-160 IMB3

MA MOTOR EFF 2

¡À

¡À

¡À

¡À

¡À¡À

- A7 -

Frame AC AD D DH E F G KK LB14A B14B

M N P S T M N P S T

MA56 110 100 9 M4x12 20 3 7.2 1-M20x1.5 170 65 50 80 M5 2.5 85 70 105 M6 2.5

MA63 130 115 11 M4x12 23 0.26 4 8.5 1-M20x1.5 225 75 60 90 M5 2.5 85 70 105 M6 2.5

MA71 145 120 14 M5x12 30 5 11 1-M20x1.5 250 85 70 105 M6 2.5 115 95 140 M8 3

MA80 175 145 19 M6x16 40 6 15.5 1-M25x1.5 295 100 80 120 M6 3 130 110 160 M8 3.5

MA90S 195 155 24 M8x19 50 0.31 8 20 1-M25x1.5 315 115 95 140 M8 3 130 110 160 M8 3.5

MA90L 195 155 24 M8x19 50 8 20 1-M25x1.5 340 115 95 140 M8 3 130 110 160 M8 3.5

MA100L 215 180 28 M10x22 60 8 24 1-M32x1.5 385 130 110 160 M8 3.5 165 130 200 M10 3.5

MA112M 240 190 28 M10x22 600.37

8 24 2-M32x1.5 400 130 110 160 M8 3.5 165 130 200 M10 3.5

MA132S 272 210 38 M12x28 80 10 33 2-M32x1.5 470 165 130 200 M10 3.5 215 180 250 M12 4

MA132M 272 210 38 M12x28 80 10 33 2-M32x1.5 510 165 130 200 M10 3.5 215 180 250 M12 4

MA160M 330 255 42 M16x36 1100.43

12 37 2-M40x1.5 615 215 180 250 M12 4 - - - - -

MA160L 330 255 42 M16x36 110 12 37 2-M40x1.5 670 215 180 250 M12 4 - - - - -

MA56-160 B14A . B14B

MA56-132 IMB14B

MA56-160 IMB14A

MA MOTOREFF 2

+0.008

-0.003

+0.009

-0.004

+0.018

+0.002

¡À

¡À

¡À

¡À

- A8 -

Rated Full Load

Locked Locked Max. Output Current Torque Torque Moment Weight

TYPE Current Speed Eff Power Rated Rated Ratedof Interia

Kw Hp in 400V Factor Current Torque Torque kgA r/min % cos ¦Õ Ist/In Tst/TN Tmax/TN

kgm2

M 63 K 2 0.18 0.25 0.50 2800 66 0.80 5.5 2.2 2.2 0.0003 14

M 63 G 2 0.25 0.33 0.66 2800 69 0.81 5.5 2.2 2.2 0.0004 14.5

M 71 K 2 0.37 0.50 0.94 2800 71 0.81 6.1 2.2 2.2 0.00055 15

M 71 G 2 0.55 0.75 1.33 2800 74 0.82 6.1 2.2 2.3 0.0006 15.5

M 80 K 2 0.75 1 1.74 2845 75 0.83 6.1 2.2 2.3 0.0008 16.5

M 80 G 2 1.1 1.5 2.45 2840 77 0.84 7.0 2.2 2.3 0.001 17.5

M 90 S 2 1.5 2 3.26 2840 79 0.84 7.0 2.2 2.3 0.00014 21

M 90 L 2 2.2 3 4.61 2840 81 0.85 7.0 2.2 2.3 0.0015 25

M 100 L 2 3 4 6.0 2860 83 0.87 7.5 2.2 2.3 0.0035 33

M 112 M 2 4 5.5 7.72 2880 85 0.88 7.5 2.2 2.3 0.0065 41

M 132 S 2 5.5 7.5 10.2 2900 86 0.88 7.5 2.2 2.3 0.0126 57

M 132 SX 2 7.5 10 14.0 2900 87 0.88 7.5 2.2 2.3 0.0146 63

M 160 M 2 11 15 19.9 2930 88 0.89 7.5 2.2 2.3 0.0461 102

M 160 MX 2 15 20 26.5 2900 89 0.89 7.5 2.2 2.3 0.0553 113

M 160 L 2 18.5 25 32.2 2930 90 0.90 7.5 2.2 2.3 0.0679 128

M 180 M 2 22 30 38.5 2940 90 0.90 7.5 2.0 2.3 0.0828 164

M 200 L 2 30 40 52.1 2950 91.2 0.90 7.5 2.0 2.3 0.129 213

M 200 LX 2 37 50 63.3 2950 92 0.90 7.5 2.0 2.3 0.151 237

M 225 M 2 45 60 77.0 2970 92.3 0.90 7.5 2.0 2.3 0.237 283

M 250 M 2 55 75 94.6 2970 92.5 0.90 7.5 2.0 2.3 0.354 362

M 280 S 2 75 100 126.6 2970 93 0.90 7.5 2.0 2.3 0.546 487

M 280 M 2 90 125 150.3 2970 93.8 0.91 7.5 2.0 2.3 0.621 558

M 315 S 2 110 150 185.3 2980 94 0.91 7.1 1.8 2.2 1.35 882

M 315 M 2 132 180 220.0 2980 94.5 0.91 7.1 1.8 2.2 1.5 972

M 315 L 2 160 220 265.6 2980 94.6 0.92 7.1 1.8 2.2 1.67 1044

M 315 LX 2 200 270 330.3 2980 94.8 0.92 7.1 1.8 2.2 3.32 1071

M 355 M 2 250 340 412 2980 95.3 0.92 7.1 1.6 2.2 2.56 1900

M 355 L 2 315 420 517 2980 95.6 0.92 7.1 1.6 2.2 3.34 2300

PERFORMANCE DATA

Synchronous Speed 3000 r/min (2 poles) 400V/50Hz

J=1/4GD2

M MOTOREFF 2

- A10 -

Rated Full Load




kgm2

M 63 K 4 0.12 0.16 0.42 1320 57 0.72 2.1 4.4 2.2 0.00009 13

M 63 G 4 0.18 0.25 0.52 1320 70 0.72 3.6 2.4 2.5 0.00010 13.5

M 71 K 4 0.25 0.33 0.73 1350 70.6 0.70 4.1 2.5 3.0 0.0011 14

M 71 G 4 0.37 0.50 1 1340 71 0.75 4.1 2.5 3.1 0.0012 14.5

M 80 K 4 0.55 0.75 1.4 1390 72.8 0.75 5.3 2.5 2.5 0.0013 15

M 80 G 4 0.75 1 1.91 1380 74.4 0.76 6.0 2.3 2.3 0.0013 16

M 90 S 4 1.1 1.5 2.71 1390 76.2 0.77 6.0 2.3 2.3 0.002 23

M 90 L 4 1.5 2 3.49 1390 78.5 0.79 6.0 2.3 2.3 0.0027 25

M 100 L 4 2.2 3 4.84 1410 81 0.81 7.0 2.3 2.3 0.0062 33

M 100 LX 4 3 4 6.39 1410 82.6 0.82 7.0 2.3 2.3 0.0070 35

M 112 M 4 4 5.5 8.36 1435 84.2 0.82 7.0 2.3 2.3 0.0119 41

M 132 S 4 5.5 7.5 10.9 1400 85 0.83 7.0 2.3 2.3 0.0251 61

M 132 M 4 7.5 10 14.5 1440 87 0.84 7.0 2.3 2.3 0.034 73

M 160 M 4 11 15 21.1 1460 88 0.84 7.0 2.2 2.3 0.0870 115

M 160 L 4 15 20 28.3 1460 89 0.85 7.5 2.2 2.3 0.1078 132

M 180 M 4 18.5 25 34.3 1470 90.5 0.86 7.5 2.2 2.3 0.1528 159

M 180 L 4 22 30 40.5 1470 91 0.86 7.5 2.2 2.3 0.1557 172

M 200 L 4 30 40 54.3 1470 92 0.86 7.2 2.2 2.3 0.2564 234

M 225 S 4 37 50 66.1 1480 92.5 0.87 7.2 2.2 2.3 0.4365 268

M 225 M 4 45 60 79.8 1480 92.8 0.87 7.2 2.2 2.3 0.5458 302

M 250 M 4 55 75 97.8 1480 93 0.87 7.2 2.2 2.3 0.7293 383

M 280 S 4 75 100 131.1 1480 93.8 0.87 7.2 2.2 2.3 1.26 550

M 280 M 4 90 125 157.3 1480 94.2 0.87 7.2 2.2 2.3 1.65 614

M 315 S 4 110 150 190.2 1490 94.5 0.88 6.9 2.1 2.2 1.98 893

M 315 M 4 132 180 227.1 1490 94.8 0.88 6.9 2.1 2.2 2.61 990

M 315 L 4 160 220 273.6 1490 94.9 0.89 6.9 2.1 2.2 3.25 1045

M 315 LX 4 200 270 341 1490 95.0 0.89 6.9 2.1 2.2 3.86 1192

M 355 M 4 250 340 421 1490 95.3 0.90 6.9 2.1 2.2 6.42 1700

M 355 L 4 315 420 528 1490 95.6 0.90 6.9 2.1 2.2 7.95 1900

PERFORMANCE DATA Synchronous Speed 1500 r/min (4 poles) 400V/50Hz

J=1/4GD2

M MOTOR

- A11 -

EFF 2

Rated Full Load




kgm2

M 71 K 6 0.18 0.25 0.70 900 57 0.66 4.0 1.9 2.0 0.0011 14

M 71 G 6 0.25 0.33 0.90 900 60 0.68 4.0 1.9 2.0 0.0014 14.5

M 80 K 6 0.37 0.50 1.24 900 66.5 0.70 4.7 1.9 2.0 0.0016 15

M 80 G 6 0.55 0.75 1.70 900 68.2 0.66 4.7 1.9 2.1 0.0019 16

M 90 S 6 0.75 1 2.12 910 71 0.72 5.5 2.0 2.1 0.0033 19

M 90 L 6 1.1 1.5 2.98 910 73 0.73 5.5 2.0 2.1 0.0040 22

M 100 L 6 1.5 2 3.85 920 76 0.75 5.5 2.0 2.1 0.0082 32

M 112 M 6 2.2 3 5.36 935 79 0.76 6.5 2.0 2.1 0.0147 41

M 132 S 6 3 4 6.7 960 81 0.76 6.5 2.1 2.1 0.0343 53

M 132 M 6 4 5.5 8.8 960 82 0.76 6.5 2.1 2.1 0.0429 61

M 132 MX 6 5.5 7.5 11.7 960 84 0.77 6.5 2.1 2.1 0.0543 70

M 160 M 6 7.5 10 15.9 970 86 0.77 6.5 2.0 2.1 0.1003 101

M 160 L 6 11 15 22.4 970 87.5 0.78 6.5 2.0 2.1 0.1336 120

M 180 L 6 15 20 29.2 970 89 0.81 7.0 2.0 2.1 0.2332 170

M 200 L 6 18.5 25 35.8 970 90.0 0.81 7.0 2.1 2.1 0.3532 187

M 200 LX 6 22 30 41.90 970 90.1 0.83 7.0 2.1 2.1 0.3401 210

M 225 M 6 30 40 55.50 980 91.5 0.84 7.0 2.0 2.1 0.5793 288

M 250 M 6 37 50 66.90 980 92.0 0.86 7.0 2.1 2.1 0.9524 367

M 280 S 6 45 60 81.10 980 92.5 0.86 7.0 2.1 2.0 1.31 483

M 280 M 6 55 75 98.10 980 92.8 0.86 7.0 2.1 2.0 1.54 550

M 315 S 6 75 100 133.2 990 93.5 0.86 7.0 2.0 2.0 3.55 930

M 315 M 6 90 125 158.70 990 93.8 0.86 7.0 2.0 2.0 4.17 950

M 315 L 6 110 150 192.2 990 94.0 0.86 6.7 2.0 2.0 5.10 1092

M 315 LX 6 132 180 230.2 990 94.2 0.87 6.7 2.0 2.0 6.17 1150

M 355 M 6 160 220 276.5 990 94.9 0.88 6.7 1.9 2.0 7.29 1550

M 355 MX 6 200 270 346.4 990 94.7 0.88 6.7 1.9 2.0 8.67 1600

M 355 L 6 250 340 433 990 94.7 0.88 6.7 1.9 2.0 11.04 1700


J=1/4GD2

M MOTOR

- A12 -

EFF 2

Rated Full Load

Locked Locked Max. Output Current Torque Torque Moment

Weight TYPE Current Speed Eff Power Rated Rated Rated

of Interia

Kw Hp in 400V Factor Current Torque Torque kgA r/min % cos ¦Õ Ist/In Tst/TN Tmax/TN kgm2

M 80 K 8 0.18 0.25 0.84 690 52 0.61 3.3 1.8 1.9 0.0025 22

M 80 G 8 0.25 0.33 1.09 690 54.6 0.61 3.3 1.8 1.9 0.003 24

M 90 S 8 0.37 0.50 1.42 690 62.8 0.61 4.0 1.8 1.9 0.0051 26

M 90 L 8 0.55 0.75 2.06 690 63.5 0.61 4.0 1.8 2.0 0.0065 28

M 100 L 8 0.75 1 2.3 680 71.0 0.67 4.0 1.8 2.0 0.00576 30

M 100 LX 8 1.1 1.5 3.2 680 73.0 0.69 5.0 1.8 2.0 0.00716 32

M 112 M 8 1.5 2 4.2 690 75.0 0.69 5.0 1.8 2.0 0.01263 40

M 132 S 8 2.2 3 5.7 710 78.0 0.71 6.0 1.8 2.0 0.03489 56

M 132 M 8 3 4 7.2 710 79.0 0.73 6.0 1.8 2.0 0.04372 71

M 160 M 8 4 5.5 9.5 720 81.0 0.73 6.0 1.9 2.0 0.07846 97

M 160 MX 8 5.5 7.5 12.6 720 83.0 0.74 6.0 2.0 2.0 0.101 106

M 160 L 8 7.5 10 16.9 720 85.5 0.75 6.0 2.0 2.0 0.134 126

M 180 L 8 11 15 23.7 730 87.5 0.76 6.6 2.0 2.0 0.2181 168

M 200 L 8 15 20 31.6 730 88.0 0.76 6.6 2.0 2.0 0.3579 220

M 225 S 8 18.5 25 38.1 730 90.0 0.76 6.6 1.9 2.0 0.5172 226

M 225 M 8 22 30 44.5 740 90.5 0.78 6.6 1.9 2.0 0.616 248

M 250 M 8 30 40 59.9 740 91.0 0.79 6.6 1.9 2.0 0.838 344

M 280 S 8 37 50 72.4 740 91.5 0.79 6.6 1.9 2.0 1.56 468

M 280 M 8 45 60 87.9 740 92.0 0.79 6.6 1.9 2.0 1.86 503

M 315 S 8 55 75 104.9 740 92.8 0.81 6.6 1.8 2.0 3.37 900

M 315 M 8 75 100 140.7 740 93.0 0.81 6.6 1.8 2.0 4.5 980

M 315 L 8 90 125 168.7 740 93.8 0.82 6.6 1.8 2.0 5.3 1100

M 315 LX 8 110 150 205.0 740 94.0 0.82 6.4 1.8 2.0 6.2 1120

M 355 M 8 132 180 246.1 740 94.4 0.82 6.4 1.8 2.0 9.51 2000

M 355 MX 8 160 220 297.4 740 94.7 0.82 6.4 1.8 2.0 10.8 2150

M 355 L 8 200 270 369 745 94.8 0.84 6.4 1.8 2.0 12.3 2250


Rated Full Load

Locked Locked Max. Output Current Torque Torque Moment

Weight TYPE Current Speed Eff Power Rated Rated Rated

of Interia

Kw Hp in 400V Factor Current Torque Torque kgA r/min % cos ¦Õ Ist/In Tst/TN Tmax/TN kgm2

M 315 S 10 45 60 99.6 590 91.5 0.75 6.2 1.5 2.0 5.1 818

M 315 M 10 55 75 121.1 590 92.0 0.75 6.2 1.5 2.0 6.1 928

M 315 L 10 75 100 162.1 590 92.5 0.76 6.2 1.5 2.0 6.9 1080

M 315 LX 10 90 125 191 590 93.0 0.77 6.2 1.5 2.0 7.2 1200

M 355 M 10 110 150 219 590 93.2 0.78 6.0 1.3 2.0 12.5 1800

M 355 MX 10 132 180 261 590 93.5 0.78 6.0 1.3 2.0 13.7 2000

M 355 L 10 160 220 317 590 93.5 0.78 6.0 1.3 2.0 14.8 2500


J=1/4GD2

J=1/4GD2

M MOTOR

- A13 -

EFF 2

M 63 2 / 4 100 135 130 80 40 11j6 11j6 23 23 63 1807

230

M 71 2 / 4 / 6 112 150 145 90 45 14j6 14j6 30 30 71 195 255

M 80 K /G 125 165 175100

50 19j6 19j6 40 40 80 220 295

M 90 S140 180 195 56 24j6 24j6 50 50 90 250

10 320

M 90 L 125 345

M 100 L/LX 160 205 215 6328j6 28j6 60 60

100 270 385

M 112 M 190 230 240 140 70 112 30012

400

M 132 S/SX 2 / 4 / 6 / 8216 270 275 89 38k6 38k6 80 80 132 345

470

M 132 M 178 510

M 160 M/MX254 320 330

210108 42k6 42k6 160 420

615

M 160 L 25415

670

M 180 M279 355 380

241121 48k6 48k6 110 180 455

700

M 180 L 279 740

M 200 L/LX 2318 395 420 305 133 55m6

48k6200 505 770

M 200 L/LX 4 / 6 / 855m6

M 225 S 4 / 8 286 60m6 140 110 19 815

M 225 M 2 356 435 470311

149 55m6 48k6 110 225 560 820

M 225 M 4 / 6 / 860m6

845

M 250 M 2406 490 510 349 168 55m6 250 615 910

M 250 M 4 / 6 / 865m6

M 280 S 2368 985

M 280 S 4 / 6 / 8457 550 580 190

75m6 60m6 140 140280 680

24

M 280 M 2419

65m6 55m6 1101035

M 280 M 4 / 6 / 8 75m6 60m6140

M 315 S 2406

65m6 65m6 1160

M 315 S 4 / 6 / 8 / 10 80m6 80m6 170 170 1270

M 315 M 2508 635 645 457

216 65m6 65m6 140 140315 845

1190

M 315 M 4 / 6 / 8 / 10 80m6 80m6 170 170 1300

M 315 L/LX 2508

65m6 65m6 140 140 1190

M 315 L/LX 4 / 6 / 8 / 10 80m6 80m6 170 17028

1300

M 355 M 2 75m6 75m6 140 140 1500

M 355 M 4 / 6 / 8 / 10 75m6 95m6 170 170355 1010

1530

M 355 L 2610 730 710 630 254

75m6 75m6 140 140 1500

M 355 L 4 / 6 / 8 / 10 95m6 95m6 170 170 1530

M 63-90 M 100-355 M 63-355

Dimensions in mm

M M

OT

OR

- A1

4 - M

63

-35

5: IM

B3

Type Poles A AB AC B C D DA E EA H H D K L

Type Poles D E F G DB GD DA EA FA GB DC GF Eye Bolt Outlet Hole X Y Z

TM 80 K/G 19j6 40 6 15.5 M6 6 19j6 40 6 15.5 M6 6 99 99 50

TM 90 S24j6 50 20 M8 24j6 50 20 M8

NO 1 x M 20 x 1.5

TM 90 L8 7 8 7

106 106 57

TM 100 L/LX28j6 60 24 M10 28j6 60 24 M10 M8

1 x M 32 x 1.5

TM 112 M

TM 132 S/SX 2 / 4 / 6 / 838k6 80 10 33 M12 38k6 80 10 33 M12 M10

2 x M 32 x 1.5 115 122 65

TM 132 M8

TM 160 M/MX42k6 12 37

8

42k6 37TM 160 L

M16

12

M12 2 x M 40 x 1.5 152 162 75TM 180 M 48k6 110 14 42.5 48k6

M16

TM 180 L9

14 42.5 9

TM 200 L/LX 255m6 16 49 10

48k6

TM 200 L/LX 4 / 6 / 855m6 110 16 49 M20 10

TM 225 S 4 / 8 60m6 140 18 53 11 M16 2 x M 50 x 1.5 190 210 101

TM 225 M 2 55m6 110 16 49 10 48k6 14 42.5 M16 9

TM 225 M 4 / 6 / 860m6 53

16

TM 250 M 218 11 55m6 49 10

TM 250 M 4 / 6 / 865m6 58

TM 280 S 2140 M20 217 248 124

TM 280 S 4 / 6 / 8 75m6 20 67.5 M20 12 60m6 140 18 53 11

TM 280 M 2 65m6 18 58 11 55m6 110 16 49 10

TM 280 M 4 / 6 / 8 75m6 20 67.5 12 60m6140 18

53 M2011

2 x M 63 x 1.5

TM 315 S 2 65m6 18 58 11 65m6 58

TM 315 S 4 / 6 / 8 / 10 80m6 170 22 71 14 80m6 170 22 71 14

TM 315 M 2 65m6 140 18 58 11 65m6 140 18 58 11281 319 174

TM 315 M 4 / 6 / 8 / 10 80m6 170 22 71 14 80m6 170 22 71 14M30

TM 315 L/LX 2 65m6 140 18 58 11 65m6 140 18 58 11

T1 315 L/LX 4 / 6 / 8 / 10 80m6 170 22 71 14 80m6 170 22 71 14

Drive-end shaft Non drive-end shaft Terminal box

Dimensions in mm

M M

OT

OR

EF

F 2

M 8

0-3

15

: Sh

aft d

ime

nsio

ns &

Term

ina

l bo

x

- A1

5 -

M 63-355 M 63-200 M 225-355

Dimensions in mm

M M

OT

OR

EF

F 2

M 6

3-3

55

: IMB

35

Type Poles A AB AC B C D DA E EA H H D K L M N P S T

M 63 2 / 4 100 135 130 80 40 11j6 11j6 23 23 63 1807

230 115 95 1404O10 3

M 71 2 / 4 /6 112 150 145 90 45 14j6 14j6 30 30 71 195 255 130 110 160

M 80 K/G 125 165 175100

50 19j6 19j6 40 40 80 214 295

M 90 S140 180 195 56 24j6 24j6 50 50 90 250

10 320 165 130j6 200 4O12 3.5

M 90 L 125 345

M 100 L/LX 160 205 215 6328j6 28j6 60 60

100 270 385215 180j6 250

M 112 M 190 230 240 140 70 112 30012

4004O15 4

M 133 S/SX 2 / 4 / 6 / 8216 270 275 89 38k6 38k6 80 80 132 345

470265 230j6 300

M 132 M 178 510

M 160 M/MX254 320 330

210108 42k6 42k6 160 420

615

M 160 L 25415

670300 250j6 350

M 180 M279 355 380

241121 48k6 48k6 110 180 455

7004O19

M 180 L 279 740

M 200 L/LX 2318 395 420 305 133 55m6

48k6200 505 770 350 300h6 400

M 200 L/LX 4 / 6 / 855m6

M 225 S 4 / 8 286 60m6 140 110 19 815

M 225 M 2 356 435 470311

149 55m6 48k6 110 225 555 820 400 350h6 450

M 225 M 4 / 6 / 860m6

845 5

M 250 M 2406 490 510 349 168 55m6 250 615 910

M 250 M 4 / 6 / 8 8O19

M 280 S 2368

65m6

140985

500 450h6 550M 280 S 4 / 6 / 8

457 550 580 19075m6 60m6 140

280 68024 985

M 280 M 2419

65m6 55m6 110 1035

M 280 M 4 / 6 / 8 75m6 60m6140

1035

M 315 S 2406

65m6 65m6 1160

M 315 S 4 / 6 / 8 / 10 80m6 80m6 170 170 1270

M 315 M 2457 216 65m6 65m6 140 140

315 845 281190

600 550h6 660M 315 M 4 / 6 / 8 / 10

508 635 64580m6 80m6 170 170 1300

M 315 L/LX 2508

65m6 65m6 140 140 1190

M 315 L/LX 4 / 6 / 8 / 10 80m6 80m6 170 170 1300 8O24 6

M 355 M 2560

75m6 75m6 140 140 1500

M 355 M 4 / 6 / 8 /10610 730 710 254

95m6 95m6 170 170355 1010 28

1530740 680 800

M 355 L 2630

75m6 75m6 140 140 1500

M 355 L 4 / 6 / 8 /10 95m6 95m6 170 170 1530

- A1

6 -

Dimensions in mm

Type Poles AC D DA E EA HD L M N P S T FLANGE

M 63 2 / 4 130 11j6 11j6 23 23 140 230 115 95j6 1404O10 3 FF115

M 71 2 / 4 / 6 145 14j6 14j6 30 30 160 255 130 110j6 160

M 80 K/G 175 19j6 19j6 40 40 245 295

M 90 S195 24j6 24j6 50 50 255

320 165 130j6 200 4O12 3.5 FF 165

M 90 L 345

M 100 L/LX 21528j6 28j6 60 60

305 385215 180j6 250 FF 215

M 112 M 240 315 4004O15 4

M 132 S/SX 2 / 4 / 6 / 8275 38k6 38k6 80 80 360

470265 230j6 300 FF 265

M 132 M 510

M 160 M/MX330 42k6 42k6 430

615

M 160 L 670300 250j6 350 FF 300

M 180 M380 48k6 48k6 110 455

7004O19

M 180 L 740

M 200 L/LX 2420 55m6

48k6505 770 350 300h6 400 FF 350

M 200 L/LX 4 / 6 / 855m6

M 225 S 4 / 8 60m6 140 110 815

M 225 M 2 470 55m6 48k6 110 560 820 400 350h6 450 5 FF 400

M 225 M 4 / 6 / 860m6

845

M 250 M 2510 55m6 910

M 250 M 4 / 6 / 865m6

6458O19

M 280 S 2 140 985FF 500

M 280 S 4 / 6 / 8580

75m6 60m6 140685

985500 450h6 550

M 280 M 2 65m6 55m6 110 1035

M 280 M 4 / 6 / 8 75m6 60m6 140 1035

M 63-280 M 63-200 M 225-280

M M

OT

OR

EF

F 2

M 6

3-2

80

: IMB

5

- A1

7 -

Dimensions in mmType Poles AC D E HD L M N P S T FLANGE

M 180 M2 / 4 / 6 / 8 380 48k6 530

760300 250j6 350 4O19 FF 300

M 180 L110

800

M 200 L/LX 2420 55m6 580 840 350 300h6 400 FF 350

M 200 L/LX 4 / 6 / 8

M 225 S 4 / 8 60m6 140 905

M 225 M 2 470 55m6 110 640 910 400 350h6 4505

FF 400

M 225 M 4 / 6 / 860m6

935

M 250 M 2510 695 1015 8O19

M 250 M 4 / 6 / 865m6

M 280 S 2140 1110 500 450h6 550 FF 500

M 280 S 4 / 6 / 8580

75m6770

M 280 M 2 65m61150

M 280 M 4 / 6 / 8 75m6

M 315 S 2 65m6 1280

M 315 S 4 / 6 / 8 80m6 170 1510

M 315 M 2645

65m6 140980

1310600 550h6 660 8O24 6 FF 600

M 315 M 4 / 6 / 8 80m6 170 1430

M 315 L/LX 2 65m6 140 1310

M 315 L/LX 4 / 6 / 8 80m6 170 1430

M 355 M 2 75m6 140 1640

M 355 M 4 / 6 /8 /10710

95m6 1701055

1640740 680 800 8O24 6 FF740

M 355 L 2 75m6 140 1640

M 355 L 4 / 6 / 8 /10 95m6 170 1670

M 180-355 M 180-200 M 225-355

M 1

80

-35

5: IM

V1

M M

OT

OR

- A1

8 -

EF

F 2

Type Poles A A B AC B C D DA E EA H HD K L Eye Bolt

M 63 2 / 4 100 135 130 80 40 11j6 11j6 23 23 63 1807

230

M 71 2 / 4 / 6 112 150 145 90 45 14j6 14j6 30 30 71 195 255

M 80 K/G 125 165 165100

50 19j6 19j6 40 40 80 214 295 NO

M 90 S140 180 195 56 24j6 24j6 50 50 90 250

10 320

M 90 L 2/4/6/8 125 345

M 100 L/LX 160 205 215 6328j6 28j6 60 60

100 27012

385M8

M 112 M 190 230 240140

70 112 300 400

M 63-132: IM B14

M 63-132: IM B34

Dimensions in mm

Dimensions in mm

Type Poles AC D DA E EA HD L Eye BoltP N M T S P N M T S

M 63 2 / 4 130 11j6 11j6 23 23 115 230 90 60 75 120 80j6 100 2.5M6

M 71 2 / 4 / 6 145 14j6 14j6 30 30 132 255 105 70 852.5 M5

140 95j6 115 3.0

M 80 K/G 175 19j6 19j6 40 40 205 295 NO 120 80j6 100 M6

M 90 S195 24j6 24j6 50 50 225

320140 95j6 115

3 160 110j6 130 M8

M 90 L 2/4/6/8 345M8

3,5

M 100 L/LX 21528j6 28j6 60 60

260 385M8 150 110j6 130 3,5 200 130j6 165 M10

M 112 M 240 270 400

M MOTOR EFF 2

Small Flange (B14A) Large Flange (B14B)

- A19 -

TypePower Current Speed ¦Ç Power Locked-rotor Locked-rotor Pull-out

factor torque current torque(KW) (A) (rpm) % cos Rated torque Rated torque Rated torque

MD80K-4 0.45 1.4 1420 66 0.74 1.5 6.5 1.8

2 0.55 1.5 2860 65 0.85 1.6 7 1.8

MD80G-4 0.55 1.7 1420 68 0.74 1.5 6.5 1.8

2 0.75 2 2860 66 0.85 1.6 7 1.8

MD90S4 0.85 2.3 1430 74 0.77 1.5 6.5 1.8

2 1.1 2.8 2850 72 0.84 1.6 7 1.8

MD90L-4 1.3 3.3 1430 76 0.78 1.5 6.5 1.8

2 1.8 4.3 2850 74 0.84 1.6 7 1.8

MD100LA-4 2 4.8 1430 78 0.81 1.5 6.5 1.8

2 2.4 5.6 2850 76 0.86 1.6 7 1.8

MD100LB-4 2.4 5.6 1430 79 0.83 1.5 6.5 1.8

2 3 5.7 2850 77 0.89 1.6 7 1.8

MD112L-4 3.3 7.4 1450 81 0.83 1.5 6.5 1.8

2 4 8.6 2860 80 0.88 1.6 7 1.8

MD132S-4 4.5 9.8 1450 83 0.84 1.5 6.5 1.8

2 5.5 11.9 2860 79 0.88 1.6 7 1.8

MD132M-4 6.5 13.8 1450 84 0.85 1.5 6.5 1.8

2 8 17.1 2880 80 0.89 1.6 7 1.8

MD160M-4 9 18.5 1460 87 0.85 1.5 6.5 1.8

2 11 22.9 2920 82 0.89 1.6 7 1.8

MD160L-4 11 22.3 1460 87 0.86 1.5 6.5 1.8

2 14 28.8 2920 82 0.9 1.6 7 1.8

MD180M-4 15 29.4 1470 89 0.87 1.5 6.5 1.8

2 18.5 36.7 2940 85 0.9 1.6 7 1.8

MD180L- 4 18.5 35.9 1470 89 0.88 1.5 6.5 1.8

2 22 42.7 2940 86 0.91 1.6 7 1.8

MD200L-4 26 49.9 1470 89 0.89 1.4 6.5 1.8

2 30 58.3 2950 85 0.92 1.4 7 1.8

MD225S-4 32 60.7 1480 90 0.89 1.4 6.5 1.8

2 37 71.7 2960 86 0.92 1.4 7 1.8

MD225M-4 37 69.4 1480 91 0.89 1.4 6.5 1.8

2 45 86.4 2960 87 0.92 1.4 7 1.8

MD250M-4 45 84.4 1480 91 0.89 1.4 6.5 1.8

2 55 103.2 2960 88 0.92 1.4 7 1.8

MD280S-4 60 111.3 1480 91 0.9 1.4 6.5 1.8

2 72 135.1 2970 88 0.92 1.4 7 1.8

MD280M-4 72 133.6 1480 91 0.9 1.4 6.5 1.8

2 82 152.2 2970 88 0.93 1.4 7 1.8

MD90S-6 0.65 2.2 920 64 0.7 1.4 6.5 1.8

4 0.85 2.3 1420 70 0.79 1.3 7 1.8

MD90L-6 0.85 2.8 930 66 0.7 1.4 6.5 1.8

4 1.1 3 1420 71 0.79 1.3 7 1.8

MD100LA-6 1.3 3.8 940 74 0.7 1.4 6 1.8

4 1.8 4.4 1440 77 0.8 1.3 6.5 1.8

MD100LB-6 1.5 4.3 940 75 0.7 1.4 6 1.8

4 2.2 5.4 1440 77 0.8 1.4 6.5 1.8

MD112M-6 2.2 5.7 960 77 0.75 1.4 6 1.8

4 2.8 6.7 1440 77 0.82 1.3 6.5 1.8

MD132S-6 3 7.7 960 79 0.75 1.4 6 1.8

4 4 9.5 1440 80 0.82 1.3 6.5 1.8

MD132M-6 4 9.8 960 81 0.76 1.4 6 1.8

4 5.5 12.3 1440 80 0.85 1.3 6.5 1.8

MD160M-6 6.5 15.1 970 84 0.78 1.4 6 1.8

4 8 17.4 1460 83 0.85 1.3 6.5 1.8

MD160L-6 9 20.6 970 85 0.78 1.4 6 1.8

4 11 23.4 1460 84 0.85 1.3 6.5 1.8

MD180M-6 11 25.9 980 85 0.78 1.4 6 1.8

4 14 29.8 1470 85 0.85 1.3 6.5 1.8

MD180L-6 13 29.4 980 86 0.78 1.4 6 1.8

4 16 33.6 1470 85 0.85 1.3 6.5 1.8

MD200L-6 18.5 41.4 980 87 0.78 1.4 6.5 1.8

4 22 44.7 1460 87 0.86 1.3 7 1.8



MD225-6 22 44.2 980 88 0.86 1.4 6.5 1.8

4 28 56.2 1470 87 0.87 1.3 7 1.8

MD225M-6 26 52.2 980 88 0.86 1.4 6.5 1.8

4 34 66 1470 87 0.9 1.3 7 1.8

MD250M-6 32 62.1 980 90 0.87 1.4 6.5 1.8

4 42 74.7 1470 88 0.91 1.3 7 1.8

MD280S-6 42 81.5 980 90 0.87 1.4 6.5 1.8

4 55 104.2 1470 89 0.9 1.3 7 1.8

MD280M-6 55 106.7 990 90 0.87 1.4 6.5 1.8

4 72 138.1 1480 89 0.89 1.3 7 1.8

MD90L-8 0.45 1.9 680 58 0.63 1.5 5.5 1.8

4 0.75 1.92 1420 72 0.87 1.5 6.5 1.8

MD100L-8 0.85 3.1 700 68 0.63 1.5 5.5 1.8

4 1.5 3.5 1420 75 0.88 1.5 6.5 1.8

MD112M-8 1.5 5 700 72 0.63 1.5 5.5 1.8

4 2.4 5.3 1420 78 0.88 1.5 6.5 1.8

MD132S-8 2.2 7 720 75 0.64 1.5 5.5 1.8

4 3.3 7.1 1450 80 0.88 1.5 6.5 1.8

MD132M-8 3 9 720 78 0.65 1.5 5.5 1.8

4 4.5 9.4 1440 82 0.88 1.5 6.5 1.8

MD160M-8 5 13.9 730 83 0.66 1.5 5.5 1.8

4 7.5 15.2 1450 84 0.89 1.5 6.5 1.8

MD160-8 7 19 730 85 0.66 1.5 5.5 1.8

4 11 21.8 1450 86 0.89 1.5 6.5 1.8

MD180L-8 11 26 730 86 0.74 1.5 6 1.8

4 17 31.9 1470 87 0.92 1.5 7 1.8

MD200LA-8 14 33 740 86 0.74 1.5 6 1.8

4 22 41.3 1470 88 0.92 1.5 7 1.8

MD200LB-8 17 40.1 740 87 0.74 1.5 6 1.8

4 26 48.8 1470 88 0.92 1.5 7 1.8

MD225M-8 24 53.2 740 89 0.77 1.4 6 1.8

4 34 66.7 1470 88 0.88 1.3 7 1.8

MD250M-8 30 64.9 740 90 0.78 1.4 6 1.8

4 42 78.8 1480 89 0.91 1.3 7 1.8

MD280S-8 40 83.5 740 91 0.8 1.4 6 1.8

4 55 102 1480 90 0.91 1.3 7 1.8

MD280M-8 47 96.9 740 91 0.81 1.4 6 1.8

4 67 122.9 1480 90 0.92 1.3 7 1.8

MD90S-8 0.35 1.6 680 56 0.6 1.5 5 1.8

6 0.45 1.4 930 70 0.72 1.5 6 1.8

MD90L-8 0.45 1.9 680 59 0.6 1.5 5 1.8

6 0.65 1.9 930 71 0.73 1.5 6 1.8

MD100L-8 0.72 2.9 710 65 0.6 1.5 5 1.8

6 1.1 3.1 950 75 0.73 1.5 6 1.8

MD112M-8 1.3 4.5 710 72 0.61 1.5 5 1.8

6 1.8 4.8 950 78 0.73 1.5 6 1.8

MD132S-8 1.8 5.8 730 72 0.62 1.5 5 1.8

6 2.4 6.2 970 80 0.73 1.5 6 1.8

MD132M-8 2.6 8.2 730 78 0.62 1.5 5 1.8

6 3.7 9.4 970 82 73 1.5 6 1.8

MD160M-8 4.5 13.3 730 83 0.62 1.5 5 1.8

6 6 14.7 980 85 0.73 1.5 6 1.8

MD160L-8 6 17.5 730 84 0.62 1.5 5 1.8

6 8 19.4 980 86 0.73 1.5 6 1.8

MD180M-8 7.5 21.9 730 84 0.62 1.5 5 1.8

6 10 24.2 980 86 0.73 1.5 6 1.8

MD180L-8 9 24.8 730 85 0.65 1.5 5 1.8

6 12 28.3 980 86 0.75 1.5 6 1.8

MD200LA-8 12 32.5 730 86 0.65 1.5 5 1.8

6 17 39.1 980 87 0.76 1.5 6 1.8

MD200LB-8 15 40.3 730 87 0.65 1.5 5 1.8

6 20 45.4 980 88 0.76 1.5 6 1.8

MD MOTOR MULTI-SPEED

Series MD motors are widely used in various mechanical equipment which needs stepped speed adjustment, so that they enable the equipment to have compact

structure, lower noise and ability to save energy.

- A20 -



MD250M8 30 58.5 730 90 0.86 1.5 5 1.8

6 15 33.1 980 88 0.78 1.5 6 1.8

MD160M12 2.6 11.6 480 75 0.46 1.2 4 1.8

6 5 11.9 970 84 0.78 1.3 6 1.8

MD160L12 3.7 16.4 480 77 0.46 1.2 4 1.8

6 7 15.8 970 85 0.79 1.3 6 1.8

MD180M12 5.5 19.6 490 79 0.54 1.2 4 1.8

6 10 20.5 980 86 0.86 1.3 6 1.8

MD200LA12 7.5 25.1 490 82 0.56 1.2 4 1.8

6 13 26.4 980 87 0.86 1.3 6 1.8

MD200LB12 9 28.9 490 87 0.57 1.2 4 1.8

6 15 30.4 980 87 0.87 1.3 6 1.8

MD225M 12 12 35.8 490 85 0.61 1.2 4 1.8

6 20 39.7 980 88 0.87 1.3 6 1.8

MD250M12 15 42.9 490 86 0.63 1.2 4 1.8

6 24 47.6 980 88 0.87 1.3 6 1.8

MD280S12 20 54.8 490 88 0.63 1.2 4 1.8

6 30 58.9 990 89 0.87 1.3 6 1.8

MD280M12 24 63.7 490 88 0.65 1.2 4 1.8

6 37 72.6 990 89 0.87 1.3 6 1.8

6 0.75 2.6 950 67 0.65 1.3 5.5 1.8

MD100L 4 1.3 3.7 1440 72 0.75 1.3 6 1.8

2 1.8 4.5 2900 71 0.85 1.3 7 1.8

6 1.1 3.5 960 73 0.65 1.3 5.5 1.8

MD112M 4 2 5.1 1450 73 0.81 1.3 6 1.8

2 2.4 5.8 2920 74 0.85 1.3 7 1.8

6 1.8 5.1 970 75 0.71 1.3 5.5 1.8

MD132S 4 2.6 6.1 1460 76 0.83 1.3 6 1.8

2 3 7.4 2910 71 0.87 1.3 7 1.8

6 2.2 6 970 77 0.72 1.3 5.5 1.8

MD132MA 4 3.3 7.5 1460 80 0.84 1.3 6 1.8

2 4 8.8 2910 76 0.91 1.3 7 1.8

6 2.6 6.9 970 80 0.72 1.3 5.5 1.8

MD132MB 4 4 9 1460 80 0.84 1.3 6 1.8

2 5 10.8 2910 77 0.91 1.3 7 1.8

6 3.7 9.5 980 82 0.72 1.3 5.5 1.8

MD160M 4 5 11.2 1470 81 0.84 1.3 6 1.8

2 6 13.2 2930 76 0.91 1.3 7 1.8

6 4.5 11.4 980 83 0.72 1.3 5.5 1.8

MD160L 4 7 15.1 1470 83 0.85 1.3 6 1.8

2 9 18.8 2930 77 0.91 1.3 7 1.8

8 0.65 2.7 700 59 0.63 1.3 4.5 1.8

MD112M 4 2 5.1 1450 73 0.81 1.3 6 1.8

2 2.4 5.8 2920 74 0.85 1.3 7 1.8

8 1 3.6 720 69 0.61 1.3 4.5 1.8

MD132S 4 2.6 6.1 1460 78 0.83 1.3 6 1.8

2 3 7.1 2910 74 0.87 1.3 7 1.8

8 1.3 4.6 720 71 0.61 1.3 4.5 1.8

MD132M 4 3.7 8.4 1460 80 0.84 1.3 6 1.8

2 4.5 10 2910 75 0.91 1.3 7 1.8

8 2.2 7.6 720 75 0.59 1.3 4.5 1.8

MD160M 4 5 11.2 1440 81 0.84 1.3 6 1.8

2 6 13.2 2910 75 0.91 1.3 7 1.8

8 2.8 9.2 720 77 0.6 1.3 4.5 1.8

MD160L 4 7 15.1 1440 83 0.85 1.3 6 1.8

2 9 18.8 2910 79 0.92 1.3 7 1.8

8 0.85 3.7 710 62 0.56 1.3 5.5 1.8

MD112M 4 1 3.1 950 67 0.74 1.3 6 1.8

2 1.5 3.5 1440 75 0.86 1.4 7 1.8

8 1.1 4.1 730 67 0.6 1.3 5.5 1.8

MD132S 6 1.5 4.2 970 74 0.74 1.3 6 1.8

4 1.8 4 1460 78 0.87 1.4 7 1.8



8 1.5 5.2 730 71 0.62 1.3 5.5 1.8

MD132MA 6 2 5.4 970 77 0.73 1.3 6.5 1.8

4 2.2 4.9 1460 79 0.87 1.4 7 1.8

8 1.8 6.3 730 72 0.62 1.3 5.5 1.8

MD132MB 6 2.6 6.8 970 78 0.74 1.3 6.5 1.8

4 3 6.5 1460 80 0.87 1.4 7 1.8

8 3.3 10.2 720 79 0.62 1.6 5.5 1.8

MD160M 6 4 9.9 960 81 0.76 1.5 6.5 1.8

4 5.5 11.6 1440 83 0.87 1.4 7 1.8

8 4.5 13.8 720 80 0.62 1.6 5.5 1.8

MD160L 6 6 14.5 960 83 0.76 1.5 6.5 1.8

4 7.5 15.6 1440 84 0.87 1.4 7 1.8

8 7 18.5 740 81 0.71 1.6 6.5 1.8

MD180L 6 9 20.6 980 83 0.8 1.5 7 1.8

4 12 24.1 1470 84 0.9 1.4 7 1.8

8 10 25.8 740 83 0.71 1.6 6.5 1.8

MD200L 6 13 28.7 980 85 0.81 1.5 7 1.8

4 17 33.4 1470 86 0.9 1.4 7 1.8

8 14 34.3 740 86 0.71 1.6 6.5 1.8

MD225S 6 18.5 39.9 980 87 0.81 1.5 7 1.8

4 24 46.6 1480 87 0.9 1.4 7 1.8

8 17 42.4 740 87 0.7 1.6 6.5 1.8

MD225M 6 22 43.2 980 87 0.85 1.5 7 1.8

4 28 34.3 1480 87 0.9 1.4 7 1.8

8 24 55.3 740 88 0.75 1.2 6.5 1.8

MD250M 6 26 52.8 990 88 0.85 1.5 7 1.8

4 34 63.1 1480 89 0.92 1.4 7 1.8

8 30 68.1 740 89 0.75 1.2 6.5 1.8

MD280S 6 34 67.5 990 89 0.86 1.5 7 1.8

4 42 77.9 1480 89 0.92 1.4 7 1.8

8 34 77.4 740 89 0.75 1.2 6.5 1.8

MD280M 6 37 73.4 990 89 0.86 1.5 7 1.8

4 50 91.8 1480 90 0.92 1.4 7 1.8

12 3.3 13 480 72 0.55 1.3 5 1.8

MD180L 8 5 16 740 79 0.62 1.3 6 1.8

6 6.5 14 970 82 0.88 1.3 6 1.8

4 9 19 1470 83 0.89 1.3 7 1.8

12 4.5 17 490 73 0.56 1.3 5 1.8

MD200LA8 7 20 740 81 0.67 1.3 6 1.8

6 8 17 980 83 0.88 1.3 6 1.8

4 11 23 1480 84 0.88 1.3 7 1.8

12 5.5 20 490 74 0.56 1.3 5 1.8

MD200LB8 8 22 740 81 0.67 1.3 6 1.8

6 10 21 980 83 0.88 1.3 6 1.8

4 13 27 1480 84 0.88 1.3 7 1.8

12 7 21 490 81 0.63 1.3 5 1.8

MD225M8 11 27.6 740 85 0.72 1.3 6 1.8

6 13 26 980 85 0.88 1.3 6 1.8

4 20 39 1480 86 0.9 1.3 7 1.8

12 9 26 490 82 0.63 1.3 5 1.8

MD250M8 14 34 740 85 0.73 1.3 6 1.8

6 16 33 990 85 0.88 1.3 6 1.8

4 26 49 1480 87 0.92 1.3 7 1.8

12 11 32 490 83 0.63 1.3 5 1.8

MD280S8 18.5 43 740 87 0.75 1.3 6 1.8

6 20 41 990 85 0.88 1.3 6 1.8

4 34 65 1490 87 0.92 1.3 7 1.8

12 13 37 490 84 0.63 1.3 5 1.8

MD280M8 22 51 740 87 0.75 1.3 6 1.8

6 24 49 990 85 0.88 1.3 6 1.8

4 40 75 1490 88 0.92 1.3 7 1.8

/ / / / / / / / / /

MULTI-SPEED MD MOTOR

- A21 -

Output Speed Current Eff Power Static No-load Energizing Weight TYPE Factor Braking Brake Lag power Ist/In Tst/TN Tmax/TN

Kw rpm A % cos ¦Õ torque(N.m) time (s) (w) kg

YEJ2-631-2 0.18 2720 0.53 65 0.8 4 0.2 18 5.5 2.2 2.2 12

YEJ2-631-2 0.25 2720 0.69 68 0.81 4 0.2 18 5.5 2.2 2.2 13

YEJ2-711-2 0.37 2740 0.99 70 0.81 4 0.2 18 6.1 2.2 2.2 14

YEJ2-712-2 0.55 2740 1.4 73 0.82 4 0.2 18 6.1 2.2 2.3 15

YEJ2-801-2 0.75 2845 1.83 75 0.83 7.5 0.2 30 6.1 2.2 2.3 17

YEJ2-802-2 1.1 2840 2.58 77 0.84 7.5 0.2 30 7.0 2.2 2.3 18

YEJ2-90S-2 1.5 2840 3.43 79 0.84 15 0.2 50 7.0 2.2 2.3 23

YEJ2-90L-2 2.2 2840 4.85 81 0.85 15 0.2 50 7.0 2.2 2.3 26

YEJ2-100L-2 3.0 2860 6.31 83 0.87 30 0.2 65 7.5 2.2 2.3 37

YEJ2-112M-2 4.0 2880 8.1 85 0.88 40 0.25 90 7.5 2.2 2.3 45

YEJ2-132S1-2 5.5 2900 11.0 86 0.88 75 0.25 90 7.5 2.2 2.3 69

YEJ2-132S2-2 7.5 2900 14.9 87 0.88 75 0.25 90 7.5 2.2 2.3 72

YEJ2-160M1-2 11 2930 21.3 88 0.89 150 0.35 150 7.5 2.2 2.3 120

YEJ2-160M2-2 15 2930 28.8 89 0.89 150 0.35 150 7.5 2.2 2.3 130

YEJ2-160L-2 18.5 2930 34.7 90 0.90 150 0.35 150 7.5 2.2 2.3 149

YEJ2-631-4 0.12 1310 0.44 57 0.72 4 0.2 18 4.4 2.1 2.2 13

YEJ2-632-4 0.18 1310 0.62 60 0.73 4 0.2 18 4.4 2.1 2.2 14

YEJ2-711-4 0.25 1330 0.79 65 0.74 4 0.2 18 5.2 2.1 2.2 15

YEJ2-712-4 0.37 1330 1.12 67 0.75 4 0.2 18 5.2 2.1 2.2 16

YEJ2-801-4 0.55 1390 1.57 71 0.75 7.5 0.2 30 5.2 2.4 2.3 17

YEJ2-802-4 0.75 1390 2.03 73 0.76 7.5 0.2 30 6.0 2.3 2.3 18

YEJ2-90S-4 1.1 1380 2.89 75 0.77 15 0.2 50 6.0 2.3 2.3 22

YEJ2-90L-4 1.5 1390 3.07 78 0.79 15 0.2 50 6.0 2.3 2.3 27

YEJ2-100L-4 2.2 1390 5.16 80 0.81 30 0.2 65 7.0 2.3 2.3 34

YEJ2-100L2-4 3 1410 6.78 82 0.82 30 0.2 65 7.0 2.3 2.3 38

YEJ2-112M-4 4 1410 8.80 84 0.82 40 0.25 90 7.0 2.3 2.3 48

YEJ2-132S-4 5.5 1435 11.7 85 0.83 75 0.25 90 7.0 2.3 2.3 71

YEJ2-132M-4 7.5 1440 15.6 87 0.84 75 0.25 150 7.0 2.3 2.3 83

YEJ2-160M-4 11 1440 22.3 88 0.84 150 0.35 150 7.0 2.2 2.3 128

YEJ2-160L-4 15 1460 30.1 89 0.85 150 0.35 150 7.0 2.2 2.3 142

YEJ2-711-6 0.18 850 0.74 56 0.66 4 0.2 18 4.0 1.9 2.0 9.5

YEJ2-712-6 0.25 850 0.95 59 0.68 4 0.2 18 4.0 1.9 2.0 11

YEJ2-801-6 0.37 885 1.3 62 0.70 7.5 0.2 30 4.7 1.9 2.0 17

YEJ2-802-6 0.55 885 1.79 65 0.72 7.5 0.2 30 4.7 1.9 2.1 19

YEJ2-90S-6 0.75 910 2.29 69 0.72 15 0.2 50 5.5 2.0 2.1 22

YEJ2-90L-6 1.1 910 3.18 72 0.73 15 0.2 50 5.5 2.0 2.1 26

YEJ2-100L-6 1.5 920 3.94 76 0.75 30 0.2 65 6.5 2.0 2.1 34

YEJ2-112M-6 2.2 935 5.60 79 0.76 40 0.25 90 6.5 2.0 2.1 42

YEJ2-132S-6 3.0 960 7.40 81 0.76 75 0.25 90 6.5 2.1 2.1 68

YEJ2-132M1-6 4.0 960 9.80 82 0.76 75 0.25 90 6.5 2.1 2.1 79

YEJ2-132M2-6 5.5 960 12.9 84 0.77 75 0.25 90 6.5 2.1 2.1 87

YEJ2-160M-6 7.5 970 17.0 86 0.77 150 0.35 150 6.5 2.0 2.1 122

YEJ2-160L-6 11 970 24.2 87 0.78 150 0.35 150 6.5 2.0 2.1 141

YEJ2-801-8 0.18 645 0.88 51 0.61 7.5 0.2 30 3.3 1.8 1.9 17

YEJ2-802-8 0.25 645 1.15 54 0.61 7.5 0.2 50 3.3 1.8 1.9 19

YEJ2-90S-8 0.37 670 1.49 62 0.61 15 0.2 50 4.0 1.8 1.9 23

YEJ2-90L-8 0.55 670 2.18 63 0.61 15 0.2 50 4.0 1.8 2.0 25

YEJ2-100L1-8 0.75 680 2.17 71 0.67 30 0.2 65 4.0 1.8 2.0 33

YEJ2-100L2-8 1.1 680 2.39 73 0.69 30 0.2 65 5.0 1.8 2.0 38

YEJ2-112M-8 1.5 690 4.50 75 0.69 40 0.25 90 5.0 1.8 2.0 50

YEJ2-132S-8 2.2 705 6.00 78 0.71 75 0.25 90 6.0 1.8 2.0 63

YEJ2-132M-8 3.0 705 7.90 79 0.73 75 0.25 90 6.0 1.8 2.0 79

YEJ2-160M1-8 4.0 720 10.3 81 0.73 150 0.35 150 6.0 1.9 2.0 118

YEJ2160M2-8 5.5 720 13.6 83 0.74 150 0.35 150 6.0 2.0 2.0 119

YEJ2-160L-8 7.5 720 17.8 85.5 0.75 150 0.35 150 6.0 2.0 2.0 145

YEJ2 can make action promptly when the power of electric motor is off. Quick brake time doesn’t exceed 0.15 second for frame sizes 63MM up to 90MM

and not exceed 0.2 second for frame sizes 100MM up to 160MM. YEJ2 series are widely used in machine tools, packaging machinery, woodworker

machinery, foof processing machinery, chemical engineering machinery, textile machinery, construction machinery, gear reducer and so on.

380V/50Hz 2Pole 3000RPM




YEJ2 BRAKE MOTOR ( DC )

- A22 -

BM brake motors are asynchronous three-phase totally enclosed fan cooled motors. The motors brake in case of power supply failure

ensuring further to a precise stop and a quick braking action, the security of a sudden intervention in case of an unintentional power supply

failure (f.e. power supply black-out, equipment faiure.)

The braking action is obtained without axial sliding of the shaft and provides equal braking torque in both directions of rotation. BM brake

motors are specially suitable to be used with lifting and translating machines, tooling machinery, automatic and transfer machinery in textile,

ceramic and packing fields and in all situation where precision and quickness in braking are required, or to cut production cycles in fixed

spaces and times.

1. Power range from 0.25KW to 3KW, 4 Kinds frame size from 71 to 100

2. Specialized brake disc, no asbestos, with high friction coefficient and long life time ( abrasion wasting <0.15mm by 1300,000 times

on-off)

3. AC current brake, quickly response time

4. Low noise & Vibration

BM BRAKE MOTOR ( AC )

TYPE

POWER nN IN

COS ¦µ M st /MN M max /MN

J x 10-4 A.C.TMAX D.C.TMAX

Zo(KW) (r/min) (A) (Kg.m2) (N.m) (N.m)

2 P n0=3000r/min

BM 71 K 2 0.37 2800 0.96 0.80 2.3 2.3 5.37 13.5 8.5 5700

BM 71 G 2 0.55 2800 1.35 0.82 2.3 2.3 6.05 13.5 8.5 5700

BM 80 K 2 0.75 2800 1.75 0.85 2.2 2.3 12.8 17.5 14 5700

BM 80 G 2 1.1 2800 2.55 0.85 2.2 2.3 14.2 17.5 14 5700

BM 90 S 2 1.5 2800 3.44 0.85 2.2 2.3 20.9 37 29 4280

BM 90 L 2 2.2 2800 4.83 0.86 2.2 2.3 24.15 37 29 4280

BM 100 L 2 3 2800 6.39 0.87 2.2 2.3 43.88 50 41 2650

4 P n0=1500r/min

BM 71 K 4 0.25 1400 0.83 0.68 2.4 2.4 7.95 13.5 8.5 19000

BM 71 G 4 0.37 1400 1.12 0.72 2.4 2.4 8.95 13.5 8.5 18050

BM 80 K 4 0.55 1400 1.56 0.73 2.4 2.4 16.48 17.5 14 9500

BM 80 G 4 0.75 1400 2.01 0.75 2.3 2.4 18.91 17.5 14 9500

BM 90 S 4 1.1 1400 2.75 0.78 2.3 2.3 28.77 37 29 14250

BM 90 L 4 1.5 1400 3.65 0.79 2.3 2.3 33.59 37 29 11400

BM 100 L 4 2.2 1400 5.03 0.82 2.2 2.3 56.33 50 41 7600

BM 100 LX 2 3 1400 6.82 0.81 2.2 2.3 66.18 50 41 6650

6 P n0=1000r/min

BM 71 K 6 0.18 930 0.74 0.63 2.0 2.0 11.09 13.5 8.5 26000

BM 71 G 6 0.25 930 0.94 0.64 2.0 2.0 12.75 13.5 8.5 26000

BM 80 K 6 0.37 930 1.29 0.64 2.0 2.0 25.84 17.5 14 17000

BM 80 G 6 0.55 930 1.81 0.65 2.0 2.0 29.95 17.5 14 17000

BM 90 S 6 0.75 930 2.19 0.70 2.0 2.2 39.88 37 29 17000

BM 90 L 6 1.1 930 2.98 0.72 2.0 2.2 50.88 37 29 14000

BM 100 L 6 1.5 930 3.90 0.74 2.0 2.2 96.33 50 41 10000

- A23 -

1. Front cover

2. Wave spring washer

3. Front bearing

4. Blindstop

5. Gasket

6. Terminal box cover screw

7. Terminal box cover

8. Terminal board

9. Cable gland

10. Frame

11. Key (Form A)

12. Rotor

13. Key

14. Rear bearing

15. Tierod

16. Rear cover

17. Fan

18. Circlip surface

19. Rear cover (brake surface)

20. Brake disk

21. Brake adjuster

22. Brake moving element

23. Spring

24. Braking torque adjusting locknut

25. Air gap adjusting nut

26. Brake coil

27. Lock nut

28. Endcover

29. Hexagon rear nut

30. Brake release


EXPLODED VIEW FOR SPARE PARTS

- A24 -

TYPE A B C D E F G H I Q U V W Y BB L R Z K d

BM71 112 90 43 14 30 5 11 71 10 336 5 136 108 140 113 147 80 75 8 M5

BM80 125 100 51 19 40 6 15.5 80 10 372 6 154 118 160 125 167 80 75 10 M6

BM90 140 125 56 24 50 8 20 90 12 439 7 180 128 180 155 201 98.5 98.5 10 M8

BM100 160 140 75 28 60 8 24 100 14 498 7 205 145 200 176 237 98.5 98.5 12 M10

TYPE D E F G M N P Q S U W X Y L R Z K d

BM71 14 30 5 11 130 110 160 330 10 5 107 3.5 140 141 80 75 7.5 M5

BM80 19 40 6 15.5 165 130 200 368 12 6 118 3.5 160 163 80 75 9 M6

BM90 24 50 8 20 165 130 200 439 12 7 128 3.5 180 202 98.5 98.5 M8 12

BM100 28 60 8 24 215 180 250 498 15 7 145 4 200 238 98.5 98.5 13 M10

TYPE D E F G M N P Q S U W X Y L R Z d

BM71 14 30 5 11 85 70 105 336 M6 5 107 2.5 140 147 80 75 M5

BM80 19 40 6 15.5 100 80 120 372 M6 6 118 3 160 167 80 75 M6

BM90 24 50 8 20 115 95 138 439 M8 7 128 3 180 202 98.5 98.5 M8

BM100 28 60 8 24 130 110 160 498 M8 7 145 3.5 200 238 98.5 98.5 M10

BM71...BM100


B14

B5

B3

- A25 -

Frame

Size

Mounting Dimensions(mm)Overall Dimensions(mm)

A B C D E F G H K M N P S T M N P S T AB AC AD HD L

63 100 80 40 11 23 4 8.5 63 7 75 60 90 M5 2.5 115 95 140 10 3 130 130 115 185 230

71 112 90 45 14 30 5 11 71 7 85 70 105 M6 2.5 130 110 160 10 3.5 145 145 125 205 225

80 125 100 50 19 40 6 15.5 80 10 100 80 120 M6 3 165 130 200 12 3.5 160 165 135 235 290

90S 140 100 56 24 50 8 20 90 10 115 95 140 M8 3 165 130 200 12 3.5 180 185 145 265 335

90L 140 125 56 24 50 8 20 90 10 115 95 140 M8 3 165 130 200 12 3.5 180 185 145 265 360

TYPE Power Voltage Current Speed Eff Power Tstart/Tn Tmax/Tn Starting A Run CapactionKw V A r/min % factor A uf/v

IMB3 IMB14 IMB5

MY631-2 0.18 220 1.48 2800 60 0.92 0.4 1.7 5 8uf/450v

MY632-2 0.25 220 1.96 2800 63 0.92 0.4 1.7 7 12uf/450v

MY711-2 0.37 220 2.73 2800 67 0.92 0.35 1.7 10 16uf/450v

MY712-2 0.55 220 3.88 2800 70 0.92 0.35 1.7 15 20uf/450v

MY801-2 0.75 220 5.15 2800 72 0.92 0.33 1.7 20 25uf/450v

MY802-2 1.1 220 7.02 2800 75 0.95 0.33 1.7 30 30uf/450v

MY90S-2 1.5 220 9.44 2800 76 0.95 0.3 1.7 45 40uf/450v

MY90L-2 2.2 220 13.67 2800 77 0.95 0.3 1.7 65 60uf/450v

MY631-4 0.12 220 1.1 1400 55 0.9 0.4 1.7 3.5 8uf/450v

MY632-4 0.18 220 1.62 1400 56 0.9 0.4 1.7 5 10uf/450v

MY711-4 0.25 220 2.02 1400 61 0.92 0.35 1.7 7 10uf/450v

MY712-4 0.37 220 2.95 1400 62 0.92 0.35 1.7 10 14uf/450v

MY801-4 0.55 220 4.25 1400 64 0.92 0.35 1.7 15 20uf/450v

MY802-4 0.75 220 5.45 1400 68 0.92 0.32 1.7 20 25uf/450v

MY90S-4 1.1 220 7.45 1400 71 0.95 0.32 1.7 30 30uf/450v

MY90L-4 1.5 220 9.83 1400 73 0.95 0.3 1.7 45 40uf/450v

MYALUMINUM HOUSING

MY Series aluminum housing single-phase capacitor-run asynchronous

motors, with latest design in entirety, are made of selected quality materials

and conform to the IEC standard.

MY motors have good performance, safe and reliable operation, nice

appearance, and can be maintained very conveniently while with low

noises, little vibration and at the same time of light weight and simple

construction. The multiple of starting torque is 0.3-0.7

These series motors are suitable for the occasion where the requirement

of starting torque is low and long-term continuous working, such as

home electric appliance, pumps, fans and recording meters, etc.

SERIES SINGLE-PHASE CAPACITOR RUN ASYNCHRONOUS MOTORS

OVERALL & INSTALL DIMENSIONS

OVERALL & INSTALL DIMENSIONS

IMB3 IMB14 IMB5

MONOPHASE MOTOR ( ALUMINUM HOUSING )

- A26 -

Frame

Size



71 112 90 45 14 30 5 11 71 7 85 70 105 M6 2.5 130 110 160 10 3.5 145 125 125 205 255

80 125 100 50 19 40 6 15.5 80 10 100 80 120 M6 3 165 130 200 10 3.5 160 165 135 235 295

90S 140 100 56 24 50 8 20 90 10 115 95 140 M8 3 165 130 200 12 3.5 180 185 145 265 335

90L 140 125 56 24 50 8 20 90 10 115 95 140 M8 3 165 130 200 12 3.5 180 185 145 265 360

100L 160 140 63 28 60 8 24 100 12 - - - - - 215 180 250 15 4 205 215 170 280 380

112M 190 140 70 28 60 8 24 112 12 - - - - - 215 180 250 15 4 245 240 180 310 400

TYPE Power Voltage Current Speed Eff Power Tstart/Tn Tmax/Tn Starting A Run CapactionKw V A r/min % factor A uf/v

IMB3 IMB14 IMB5

MC711-2 0.18 220 1.89 2800 60 0.72 3 1.8 12 75uf/300v

MC712-2 0.25 220 2.4 2800 64 0.74 3 1.8 15 75uf/300v

MC801-2 0.37 220 3.36 2800 65 0.77 2.8 1.8 21 100uf/300v

MC802-2 0.55 220 4.65 2800 68 0.79 2.8 1.8 29 150uf/300v

MC92S-2 0.75 220 6.09 2800 70 0.8 2.5 1.8 37 200uf/300v

MC90L-2 1.1 220 8.68 2800 72 0.8 2.5 1.8 60 300uf/300v

MC100L1-2 1.5 220 11.38 2900 74 0.81 2.5 1.8 80 400uf/300v

MC100L2-2 2.2 220 16.46 2900 75 0.81 2.2 1.8 120 400uf/300v

MC112M-2 3 220 21.88 1400 76 0.82 2.2 1.8 150 600uf/300v

MC711-4 0.12 220 1.88 1400 50 0.58 3 1.8 9 75uf/300v

MC712-4 0.18 220 2.49 1400 53 0.62 2.8 1.8 12 75uf/300v

MC801-4 0.25 220 3.11 1400 58 0.63 2.8 1.8 15 100uf/300v

MC802-4 0.37 220 4.24 1400 62 0.64 2.5 1.8 21 100uf/300v

MC90S-4 0.55 220 5.49 1400 66 0.69 2.5 1.8 29 100uf/300v

MC90L-4 0.75 220 6.87 1400 68 0.73 2.5 1.8 37 150uf/300v

MC100L1-4 1.1 220 9.52 1400 71 0.74 2.5 1.8 60 200uf/300v

MC100L2-4 1.5 220 12.45 1450 73 0.75 2.5 1.8 80 400uf/300v

MC112M-4 2.2 220 17.78 1450 74 0.76 2.2 1.8 120 600uf/300v

MCALUMINUM HOUSING

MC Series aluminum housing single-phase capacitor-start asynchronous

motors, with latest design in entirety, are made of selected quality materials


MC motors have good performance, safe and reliable operation, nice

appearance and can be maintained very conveniently while with low noises,

little vibration and at the same time of light weight and simple construction.

Hugh starting torque, perfect starting performance, generally the multiple of

starting torque can up to more than 2.5 times.

These series motors are suitable for the occasion where big starting torque

and small starting current, such as air-compressors, pumps, refrigerators,

medical apparatus, and many other machines needing full-load start.

SERIES SINGLE-PHASE CAPACITOR START ASYNCHRONOUS MOTORS

OVERALL &INSTALL DIMENSIONS


( ALUMINUM HOUSING ) MONOPHASE MOTOR

- A27 -

IMB3 IMB14 IMB5

MLALUMINUM HOUSING

SERIES SINGLE – PHASE DUAL - CAPACITOR ASYNCHRONOUS MOTORS

ML series aluminum housing single-phase dual-capacitor asynchronous

motors, with latest design in entirely ,are made of selected quality materials


ML motors have good performance ,safery and reliable operation, nice

appearance, and can be maintained very conveniently while with low noises,

little vibration and at the compositive performance is good, the multiple of

starting torque is 1.8-2.5

There series motors are suitable for the occasion where the requirements

of big starting torque and high over load, such as air-compressors,pumps,

fans,medical apparatus and instruments, and many other small machines.

Frame

Size



71 112 90 45 14 30 5 11 71 7 85 70 105 M6 2.5 130 110 160 10 3.5 145 145 125 210 255

80 25 100 50 19 40 6 15.5 80 10 100 80 120 M6 3.0 165 130 200 12 3.5 160 165 135 240 295

90S 140 100 56 24 50 8 20 90 10 115 95 140 M8 3.0 165 130 200 12 3.5 180 185 145 270 335

90L 140 125 56 24 50 8 20 90 10 115 95 140 M8 3.0 165 130 200 12 3.5 180 185 145 270 360

100L 160 140 63 28 60 8 24 100 12 - - - - - 215 180 250 15 4 205 215 170 280 380

Model Power Voltage Current Speed Eff Power Tstart/Tn Tmax/Tn Starting Run CapactiorKw V A r/min % factor Capactior uf/v uf/v

IMB3 IMB14 IMB5

ML711-2 0.37 220 2.73 2800 67 0.92 2.3 1.8 75uf/300v 12uf/450v

ML712-2 0.55 220 3.88 2800 70 0.92 2.5 1.8 100uf/300v 16uf/450v

ML801-2 0.75 220 5.15 2800 72 0.92 2.5 1.8 100uf/300v 20uf/450v

ML802-2 1.10 220 7.02 2800 75 0.95 2.5 1.8 150uf/300v 25uf/450v

ML90S-2 1.50 220 9.44 2800 76 0.95 2.5 1.8 250uf/300v 40uf/450v

ML90L-2 2.20 220 13.67 2800 77 0.95 2.5 1.8 300uf/300v 60uf/450

ML100L-2 3.00 220 18.2 2800 79 0.95 2.5 1.8 400uf/300v 60uf/450v

ML711-4 0.25 220 1.99 1400 62 0.92 2.5 1.8 50uf/300v 10uf/450v

ML712-4 0.37 220 2.81 1400 65 0.92 2.5 1.8 75uf/300v 10uf/450v

ML801-4 0.55 220 4.0 1400 68 0.92 2.5 1.8 100uf/300v 16uf/450v

ML802-4 0.75 220 5.22 1400 71 0.92 2.5 1.8 100uf/300v 20uf/450v

ML90S-4 1.10 220 7.2 1400 73 0.95 2.5 1.8 150uf/300v 30uf/450v

ML90L-4 1.50 220 9.57 1400 75 0.95 2.5 1.8 200uf/300v 35uf/450v

ML100L1-4 2.20 220 13.9 1400 76 0.95 2.5 1.8 300uf/300v 40uf/450v

ML100L2-4 3.00 220 18.6 1400 77 0.95 2.5 1.8 400uf/300v 60uf/450v



MONOPHASE MOTOR ( ALUMINUM HOUSING )

- A28 -

IMB3 IMB14 IMB5

electromotor catalogue

Documents