Ductile iron gate valve PN16. BS EN 1171:2002 PN16

V950 Gate valve

SizePattern

No.

Pack 1

Qty

Pack 2

QtyCode Barcode

Price (£) each exVAT

DN50 V950 1 0 15510 5022050560629 £346.44

DN65 V950 1 0 15511 5022050560728 £346.44

DN80 V950 1 0 15512 5022050560797 £396.55

DN100 V950 1 0 15513 5022050560933 £638.65

DN125 V950 1 0 15514 5022050560971 £921.86

DN150 V950 1 0 15515 5022050561169 £1209.02

DN200 V950 1 0 15516 5022050561305 £2070.00

DN250 V950 1 0 15517 5022050561466 £3293.43

DN300 V950 1 0 15518 5022050561695 £4571.29

General Information

V950 Gate valve

Code Description A B

15510 DN50 V950 178 260 15.0

15511 DN65 V950 190 285 18.4

15512 DN80 V950 203 310 20.0

15513 DN100 V950 229 350 30.0

15514 DN125 V950 254 400 40.0

15515 DN150 V950 267 445 50.0

15516 DN200 V950 292 600 84.0

15517 DN250 V950 330 720 145.0

15518 DN300 V950 356 830 215.0

Pegler Yorkshire reserve the right to change specifications

Dimensions

Size Pattern No. Code Kv m3/h

DN50 V950 15510 230.00

DN65 V950 15511 360.00

DN80 V950 15512 519.00

DN100 V950 15513 923.00

DN125 V950 15514 1443.00

DN150 V950 15515 2077.00

DN200 V950 15516 3693.00

DN250 V950 15517 5771.00

DN300 V950 15518 8310.00

Pegler Yorkshire reserve the right to change specifications

Flow Rate

Valves and Fittings

Pegler Customcare 5 Year Guarantee - Terms and Conditions

Products are subject to a 5 year guarantee that is between Pegler and the final purchaser of the product.

The guarantee is subject to proof of purchase being supplied.

Guarantee

This guarantee does not affect any statutory rights the consumer may have in law.

The guarantee covers manufacturing or material defects and does not cover parts subject to normal wearand tear.

This product range has been designed for the use of homeowners, domestic and commercial applicationsand therefore the guarantee is subject to the product being properly selected for their intended serviceconditions.

The guarantee is not applicable where the product is fitted contrary to the conditions in the fittinginstructions.

This is reinforced where valves are covered by the European Pressure Equipment Directive (PED97/23/EC)where Installation, Operating and Maintenance Instructions are supplied with each product and/or carton.

Provided it is installed correctly and receives adequate preventative maintenance it should give years oftrouble –free service.

Abusive behaviour and accidental damage to the product are not covered by this guarantee.

The extent of this liability is limited to the cost of the replacement of the defective item and not to fitting orconsequential damages.

Component Material

Body Ductile iron

Body seat ring Gunmetal

Bonnet Ductile iron

Bonnet gasket EPDM

Stem Stainless steel

Wedge Ductile iron

Wedge trim Gunmetal

Wedge nut Gunmetal

Gland flange Ductile iron

Gland Ductile iron

Gland packing Graphite non asbestos

Stuffing box Ductile iron

Stuffing box gasket Compressed graphite

Handwheel Ductile iron

Materials

Size Code

Flange

Diameter

(mm)

Pitch

Circle

Diameter

(mm)

No

of

Bolts

Bolt

Diameter

(mm)

Hole

Diameter

(mm)

Raised

Face

Diameter

(mm)

Raised

Face

Height

(mm)

Thickness

of Flange

(mm)

Pegler Yorkshire reserve the right to change specifications

Flange Data

Steam Water Oil Air Gas Inert Gas Combustible† Gas Corrosive†† Gas Oxygen

no yes no no no no no no

Pegler Yorkshire reserve the right to change specifications

Technical Suitability

Gas application guide

Class 1. INERT Air, argon, carbon dioxide, helium, nitrogen Class 2. COMBUSTIBLE Hydrogen, methane, natural gas, town gasClass 3. CORROSIVE Chlorine, sulphur dioxide Class 4. OXYGENClass 1. INERT Air, argon, carbon dioxide, helium, nitrogen † Valves are suitable for British Gas Applications Family Gases 1, 2 and 3.†† Suitable in applications where moisture is completely absent.

Pegler Yorkshire Group Ltd, St Catherine's Ave, Doncaster, S Yorkshire, DN4 8DF

Telephone: Phone +44 (0) 844 243 4400 Fax: +44 (0) 844 243 9870 Website: www.pegleryorkshire.co.uk

Registered office : Pegler Yorkshire Group Ltd, St Catherine's Ave, Doncaster, S Yorkshire, DN4 8DF Company no : 00401507

142 1 Range overview 2 Product details 3 Technical data 4 Flow charts

Commercial valve solutionsConnection instructions

Flange material specification:

� Pressure and temperature must not exceedits rating.

� Gasket selection must be in line with therating of the flange.

� The fluid being handled will affect thegasket selection.

� All bolts must be compatible with theflange being used.

Pipe and its mating flanges should becleaned and made ready for assembly.

A clean and appropriate gasket should beselected for the flange type being used. Flatface and raised faces should not be mixed.

Piping should being properly supported with use of correctly sized hanging orsecuring brackets.

Flange components have their own designlimitations and correct selection andcompatibility is vital.

All pipes need to be aligned correctly to ensure that the valve integrity ismaintained, avoiding twisting and distortionof the valve’s structure and valve damage.

As the valve is assembled ensure that the bolts are placed and secured with nuts at hand tightness employing thecrossover method of tightening to secure a sound joint.

Butterfly valves provide positive shut off inboth flow directions. The disc profile isdesigned to give sealing properties atminimum torque. Raised seat profile provides positive flange seal.

Flange connections

Welded joints should be made by qualifiedinstallers having carried out the requisiterisk assessments and health and safety considerations.

Welded connections